Engineering Jobs in North Reading Middlesex County Ma Remote
279 positions found
Date Posted:
2026-01-19Country:
United States of AmericaLocation:
US-MA-ANDOVER-AN2 ~ 352 Lowell St ~ AN2 HAMPSHIRE BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory. The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.
What You Will Do
Address major yield and technical issues highlighted by tech leads and factory operation managers.
Perform data analysis and provide direction for overall product yield and performance improvement.
Facilitate collaboration across manufacturing work centers and design engineering.
Empower production test engineer to resolve complex failures through data driven troubleshooting technique.
Establish technical understanding of the product architecture, subassemblies, and test requirement.
Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.
Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.
Qualifications You Must Have
Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience
4+ years in Production testing/troubleshooting
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
Qualifications We Prefer
Preferred majors: Electrical Engineering, Computer Science/Engineering Technology
The ability to interpret and analyzer RF parametric data
Experience with lean principles in a manufacturing environment
Current DOD Secret Security Clearance
Excellent communication skills (written and verbal) and presentation skills
Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations
Experience applying technical principles in the manufacturing life cycle
Experience with Quality Systems and their application
Shop Floor Management
Strong engineering aptitude and analytical skills
Technical problem solving
Customer and company oriented and driven to meet or exceed expectations
Ability to work cohesively in a team environment
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation assistance is not available
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-01-15Country:
United States of AmericaLocation:
US-MA-TEWKSBURY-TB3 ~ 50 Apple Hill Dr ~ CONCORD BLDG, Tewksbury Tb3 300 ConcordPosition Role Type:
UnspecifiedU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance:
DoD Clearance: SecretAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.
The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.
You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.
What You Will Do
Provide technical oversight and management for a variety of Systems Engineering efforts
Concept and requirements development (including decomposition and flowdown) within a mature product-line
Concept of Operations (CONOPS) development and design
Algorithm optimization and development
Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System
Collaboration with customer to bring new capabilities to the warfighter
Functional analysis of real world and test data; trade studies to bring advanced features to fielded system
Support and lead Internal and External Program and Design Reviews
Collaborate with other IPT/CPT leads from the various functions and products
Support and lead Internal Research and Development for future capability upgrades
System integration and test support, including live fire test events
Periods of travel up to 25% of time both domestically and internationally
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience
Experience with Air Defense Systems in systems engineering roles supporting development or production
Experience with managing budget, scope and/or earned value
Qualifications We Prefer
Experience interfacing with external customers and industry partners
Excellent communication skills, written and verbal, with a variety of audiences
Self-motivated, passionate leader
5+ years of experience in Air Defense Systems, Systems Engineering production or development
Existing DoD Security Clearance
Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)
Experience managing competing programmatic priorities
Experience making challenging technical decisions
Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent
Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)
Advanced degree in EE, CE, Physics, Math, ME, Aerospace\
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation assistance is available
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Job Summary: Perform customer support activities involving the installation, preventative and corrective maintenance, and testing of electronic equipment and sub-systems used for monitoring nuclear power levels in the nuclear industry.
Test and verify the performance and required maintenance of assigned customer equipment.
Interacts with customers and co-workers and work is usually done under general supervision.
Essential Job Functions and Accountabilities: Perform electrical testing of components, printed circuits, assemblies, and systems.
Document test plans, test procedures, and test results of each assigned job.
Work with Engineering and Assembly to ensure manufacturing, construction, installation and operations conform to functional specifications and customer requirements.
Identify, diagnose, and repair electronic failures at the component level Other miscellaneous duties as assigned.
Minimum Requirements: H.S.
Diploma or equivalent.
2-5 years electronics testing or relevant work experience.
General knowledge of the operation of analog electronic components.
Demonstrated ability to troubleshoot electronic circuit's.
Ability to read and understand electronic schematic's.
Knowledge of ESD best practices.
Preferred Requirements: Associates degree in technical discipline or Technical Electrical/Electronics/Computer experience desired but not required.
Non-negotiable Criteria: Demonstrates company values
- Integrity, Intensity, Innovation and Involvement.
We also keep businesses connected with dependable fiber infrastructure and internet solutions backed by award-winning service, helping organizations thrive in an increasingly connected world.
At the forefront of digital transformation, we continuously evolve our offerings to meet the dynamic needs of our customers—delivering reliable connectivity and groundbreaking digital experiences.
Our commitment to excellence extends beyond infrastructure.
We invest in our people through personalized training, coaching, and a supportive work environment that fosters growth and opportunity.
Employees are empowered to represent a superior telecommunications company while making a meaningful impact in the communities we serve.
We offer a robust benefits package that includes rewards, recognition programs, and employee discounts—ensuring our team members are supported in both their professional and personal journeys.
At Astound, we believe in creating astounding possibilities for everyone, everywhere.
A Day in the Life of the Business Development Manager I, II, or III: Opportunity to earn up to $135,000
- $230,000 a year (or more), with uncapped commissions! We offer a $60,000
- $100,00 base salary with a commission plan that allows you the freedom to exceed quota! (
*See total compensation details below the job description).
You will be representing a superior internet package and company that cares about you and our customers.
Astound is looking to hire a Business Development Manager (BDM)I, II, or III in the greater Boston, MA market, supporting Nationwide.
The BDM I, II, or III is primarily responsible for Negotiating Right of Entry Agreements and Bulk agreements with condominium associations, property managers, property owners and developers, allowing Astound the opportunity to deliver its residential high-speed internet, cable television and phone services to area MDUs (multiple dwelling units).
Account Management of existing bulk portfolio and negotiation of renewal agreements with current bulk customers.
Negotiate new Right of Entry Agreements and new Bulk agreements with condominium associations, property managers, property owners and developers Source leads for new build opportunities Build relationships with real estate developers and property management firms Manage projects throughout the negotiation cycle as well as support the efforts of the building relations and customer support teams throughout the retention cycle Implement successful strategies to drive expansion of "on-net" commercial buildings in existing and new markets Target, identify and develop strategic revenue-producing partnerships and alliances Evaluate and support business development opportunities identified by our Enterprise sales channel Develop market analysis and business case to support expansion opportunities Build relationships with strategic partners and organizations Work effectively with sales engineering/network deployment team to ensure timely review, assessment and deployment of all leads Be aware of ALL new leads, market developments and potential target buildings, current or future.
This will include (but not limited to) the following activities: Business District walkthroughs Initiating and attending networking events General up to date knowledge of MTU market within territory Attend various business and association functions within territory, including some evening events Convey building lead information efficiently to support personnel and ensure all order information is entered accurately and within 24 hours Complete all Access Agreement paperwork, providing the owner/operator with a scheduled installation which has been stipulated by engineering and Complete all paperwork and agreements accurately, legibly and thoroughly Maintain and demonstrate a current knowledge of Enterprise products, programming, promotional offers, technology and deployment specifications Provide exceptional customer service at all times Manage CRM systems, process, and quality of data Produce CRM output reports as requested by management Maintain updated sales funnel records, logging notes, contact information & activities Project a professional business manner and operate with a high degree of integrity Other duties as assigned What You Bring to the Table: Three to five years in an outside sales or customer service environment managing business accounts Account Management experience is required Sales experience in real-estate or telecommunications or related industries preferred Experience working with realtors and property management firms is also preferred Exceptional business acumen Strong written and verbal communication skills required, as this position is responsible for ensuring potential customers understand the features and benefits of all Astound fiber products and the pricing and promotional offers available Ability to work within Microsoft Office applications, such as Word, Excel, and Outlook Ability to work with and manage CRM systems Must be able to work independently with minimal supervision Excellent detail orientation and follow through skills Strong discretionary skills; this position will have access to information of a confidential nature Demonstrated expertise in leading successful sales and/or market development organizations in technology businesses Proven ability to coordinate across broad teams including marketing, operations, sales, and finance Proven ability to conduct complex contract negotiations Proven results in developing a channel and exceeding sales organizational objectives Understanding of fiber optic data and telecommunications solutions in CLEC business Possess a valid driver's license with a satisfactory driving record per the Company's Vehicle Driving Policy Education and Certifications: High school diploma or equivalent is required College degree in business, project management, or related field is preferred We're Proud to Offer a Comprehensive Benefits Package Including: 401k retirement plan, with employer match Insurance options including: medical, dental, vision, life and STD insurance Paid Time Off/Vacation: Starting at 80 hours per year, and increases based on tenure with the organization Floating Holiday: 40 hours per year Paid Holidays: 7 days per year Paid Sick Leave: Astound allows a number of paid sick hours per calendar year and varies based on state and/or local laws Tuition reimbursement program Employee discount program
*Benefits listed above are for regular full-time position Base Salary: The ba se salary range for this position is $ 60,000
- $ 100,000 annually , plus opportunities for bonus, benefits and commission, if applicable.
The base pay range represents the low and high end of the hiring range for this job.
Actual pay will vary and may be above or below the range based on various factors including but not limited to relevant skills, experience, and capabilities.
I BDM I- $60,000
- $75,000 annually BDM II- $75,000
- $85,000 annually BDM III- $85,000
- $100,000 annually Our Mission Statement:
* Take care of our customers
* Take care of each other
* Do what we say we are going to do
* Have fun Astound is proud to be an Equal Opportunity Employer, and we are dedicated to cultivating an inclusive workplace where employees feel valued, respected, and empowered.
Discrimination of any kind has no place here.
We are committed to providing equal opportunities for all employees and applicants, regardless of race, color, religion, sex, gender, pregnancy, childbirth and related conditions, national origin, age, physical and mental disability, marital status, sexual orientation, genetic information, military or veteran status, citizenship, or other status or characteristic protected by applicable law.
We strive to create a culture that celebrates our differences and promotes fairness and inclusivity in all aspects of our business.5c143e31-5e48-4549-b638-05792d185386
Atlas is a nationwide leader in civil engineering, materials testing and geotechnical consulting services for environmental, industrial and infrastructure construction projects. Headquartered in Denver, CO, Atlas currently has over 3,500 employees with offices throughout the US, including Alaska & Hawaii. It’s no accident that Atlas creates a better experience for infrastructure and environmental projects. It’s how we are built – with the best people in the industry, with the reach and expertise to help at any and every step of the project, and with a heart-led approach that puts quality and safety at the center of everything we do. We’re just built to be better. We are a great company.
We are seeking an Environmental Project Manager to join our Woburn, MA or Manchester, NH teams! Come join us!
Job responsibilities include but are not limited to:
- Managing and prepare all phases and associated Massachusetts Contingency Plan milestone documents as well as NH Contaminated Site Management and/or Maine Petroleum and Hazardous Waste Cleanup regulations.
- Designing and overseeing site assessments.
- Mentoring junior staff.
- Procuring and managing subcontractors.
- Strong time and task-management skills
- Supporting other Atlas services lines commensurate with skills: Building Sciences, Regulatory Compliance, SPCC Plan preparation, NPDES Services, and/or Industrial Hygiene
- Supporting business development and proposal efforts.
- Technical support for Atlas 24/7 Emergency Response efforts
Minimum requirements:
- Bachelor of Science degree in Geology, Environmental science, Engineering or similar field of study
- 5-10+ years of professional experience
- Thorough knowledge of Massachusetts Contingency Plan
- Strong technical writing skills. Must be able to prepare reports independently and with limited direction.
- Strong project management skills
- Valid driver's license
Technical requirements:
- Knowledge and understanding of the Massachusetts Contingency Plan, developing compliance programs and preparing milestone reports.
- Developing and implementing subsurface and groundwater site assessment program
- Current OSHA HAZWOPER Certification
- Proficient with Microsoft Office (Word, Excel, PowerPoint, etc.)
- Proficient with PDF software
- Knowledge of Teams/OneDrive/SharePoint
- Fill Environmental Professional role for ASTM Phase I Environmental Site Assessment reports
Other miscellaneous qualities:
- Tracking to obtain Licensed Site Professional License's
- Ability to travel within New England up to 20% of the time
- Participate in Emergency Response technical support program, including periodic evening and weekend response support
- Ability to travel within New England up to 20% of the time
- Risk Assessment, Site Assessment, Fate and Transport, and/or remediation design expertise a plus.
- Strong understanding of environmental field practices; environmental media sampling, soil and groundwater investigation, remediation oversight.
Compensation:
$80,000 - $105,000 per year.
The expected salary range for the position is displayed in accordance with the state’s law. Final agreed upon compensation is based upon individual qualifications and experience.
Benefits:
Atlas offers a comprehensive benefit program to meet the diverse needs of our employees. Depending on your employment status, Atlas benefits include health, dental, vision, life, AD&D, voluntary life / AD&D, disability benefits, leaves of absence, 401k, paid time off, paid holidays, employee assistance program, educational assistance program.
Who We Are:
We strive to be the most sought-after infrastructure and environmental solutions company, known for our unique, values-driven approach and brought to life by the industry’s most exceptional people.
Atlas provides professional testing, inspection, engineering, environmental and consulting services from more than 100 locations nationwide. We deliver solutions to both public and private sector clients in the transportation, commercial, water, government, education and industrial markets.
With a legacy of providing consistent quality and results, Atlas creates a better experience at every stage of an infrastructure project. We connect the best experts in the industry to deliver value from concept to completion and beyond. This means doing everything our clients expect and then raising the expectations in a way that only our people can.
Our Values:
Life: We enhance quality of life. We value people and safety above all else.
Heart: As our hallmarks, we act with compassion, empathy and respect.
Trust: We work together as partners, doing what we say with full accountability.
Mastery: Always striving for the highest quality, we ensure greatness inspires all our work.
Atlas EEOC Statement
Atlas is an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.
This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Atlas makes hiring decisions based solely on qualifications, merit, and business needs at the time. For more information, read through our EEO Policy
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Amit, at 224 507 1290 Title: IT Solution Architect (Financial Systems)
- Remote Location: Remote (Candidates local to Corning, NY and Charlotte, NC are preferred.
Open to candidates in other locations; candidates must be willing to work EST time zone) Duration: 12 Months with possibility of extension based on demand.
Schedule: Full-time, M-F, 8 AM
- 5 PM.
Some potential flexibility may be required for after-hours work, as needed.
Travel
- up to 25% for travel to Corning, NY.
Estimated as one week per month based on project need.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Position Summary The IT Solution Architect for Supply Chain and Finance is responsible for designing, developing, and guiding the implementation of enterprise technology solutions that support client's financial and supply chain processes.
This role collaborates closely with business stakeholders and cross-functional IT teams to ensure systems are scalable, secure, and aligned with organizational strategy.
The architect enables operational excellence by shaping solution roadmaps, ensuring platform integrity, and driving continuous improvement across finance and supply chain applications.
Key Responsibilities Solution Architecture and Design Develop end-to-end architectural designs for finance and supply chain systems in alignment with business objectives.
Assess existing application landscapes and recommend improvements, modernization opportunities, and integration strategies.
Ensure solutions comply with security, data governance, and enterprise architecture standards.
Business Partnership and Collaboration Engage with Finance, Supply Chain, and IT partners to understand business needs and translate them into technical requirements.
Participate in recurring strategic and operational touchpoints, including cFIN review sessions and architecture-focused team meetings.
Provide subject matter guidance on financial systems such as OneStream and other platforms influencing client's digital finance ecosystem.
Technical Leadership and Support Serve as the technical lead for solution implementations, enhancements, and integrations across finance and supply chain domains.
Address escalated issues, provide root-cause analysis, and ensure long-term stability of assigned applications.
Partner with engineering and operations teams to ensure solution resilience, performance, and sustainability.
Governance, Standards and Documentation Contribute to the development of architecture standards, design patterns, and best practices.
Maintain accurate architectural documentation, including roadmaps, diagrams, functional specifications, and integration models.
Continuous Improvement and Innovation Evaluate emerging technologies and recommend opportunities to enhance process efficiency, automation, and system capabilities.
Support modernization initiatives that strengthen client's digital transformation objectives in the finance and supply chain organizations.
Required Qualifications
- Education and Experience Bachelor's degree in Information Technology, Computer Science, Engineering, or related field (minimum required).
5 years of experience as a Solution Architect with financial systems.
Proven experience architecting solutions in enterprise finance and/or supply chain environments.
Deep knowledge of financial systems (e.g., OneStream, SAP cFIN (Central Finance), or similar platforms).
Familiarity with SAP finance and supply chain modules.
Strong understanding of systems integration, data flows, and enterprise application ecosystems.
Ability to translate complex technical concepts into clear business language.
Key Competencies Strategic Thinking Ability to design future-focused, scalable solutions.
Technical Expertise Strong architecture and platform skills across finance and supply chain.
Communication and Influence Effectively collaborates with technical and non-technical stakeholders.
Problem Solving Skilled at diagnosing complex issues and proposing durable solutions.
Execution Ability to manage multiple priorities and deliver high-quality outcomes.
Preferred Qualifications Experience working in a global, matrixed organization.
Understanding of data governance, security protocols, and architecture frameworks.
Demonstrated ability to lead collaborative solution workshops and stakeholder discussions.
Interview Process: Two rounds.
First round phone screen with direct manager.
Second round video panel interview, including technical review.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP cFIN, OneStream
Remote working/work at home options are available for this role.
Lead complex construction projects from concept to completion, ensuring timelines, budgets, and quality standards are met. Collaborate with cross-functional teams and contractors to drive results and deliver exceptional builds. If you're a proactive leader with a passion for construction excellence, we want to hear from you.
Company Benefits:
- 13 paid holidays
- Vacation and sick pay
- PPE provided along with annual allowance for boots and prescription safety glasses
- Work shirts provided by company
- Annual appreciation package
- Early performance evaluation opportunities
- Competitive benefits (medical/dental/vision)
- 401k + match
- Company paid life insurance and disability
- Employee assistance program
- Career development opportunities
Responsibilities:
- Planning, organizing, directing, controlling, and evaluating construction projects (HVAC/Refrigeration & Mechanical projects) from start to finish according to schedule, specifications, and budget.
- Preparing and submitting construction project budget estimates, critical path schedules, and quality control programs.
- Planning and preparing construction schedules and milestones, and monitoring progress against established schedules.
- Preparing contracts and negotiating revisions, changes, and additions to contractual agreements with architects, consultants, clients, suppliers, and subcontractors.
- Planning, coordinating, and managing effectively all Foremen, material, and equipment to meet the established budget, schedule, and scope of the projects.
- Preparing progress reports and issuing reports to clients as necessary.
Qualifications:
- Must be able to develop and maintain detailed MS Project schedules (startup-task durations, resource allocations, labor costs, etc.).
- Must be able to maintain multiple complex projects in all varying phases of construction at the same time.
- 2-5 years in industrial piping or Ammonia Refrigeration as a Project Manager.
- Successfully completed multiple large-scale industrial Piping and Ammonia Refrigeration projects for reputable contractors.
- Coaching, mentoring, and teaching project teams.
- Advanced financial management and forecasting experience.
- Excellent oral and written communication skills; must be detail-oriented, self-sufficient, and self-motivated.
- Exceptional planning and organizing skills with the ability to manage a number of projects
Company Profile:
CIMCO specializes in the engineering, design, manufacture, installation and service of complex thermal building solutions for industrial, process cooling and recreational refrigeration and mechanical systems. For more than 100 years, CIMCO's leadership and unparalleled research, development and manufacturing programs has put us at the forefront of industry advancements and technological breakthroughs. Our professional engineers, technicians and designers apply innovative state-of-the-art equipment and refrigerants to develop systems that meet even the most complex thermal challenges.
CIMCO is committed to creating an inclusive environment where people from all backgrounds can thrive. Together, we embrace diversity of thought, experience, and perspective, as we combine our unique skills and capabilities to drive successful outcomes for all stakeholders. As an equal opportunity employer, CIMCO provides accessibility accommodations during the recruitment process. Should you require any accommodation, please let us know and we will work with you to meet your needs.
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
