Engineering Jobs in Mount Pleasant, WI

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

Manufacturing Engineer – Precision Machining

Racine, WI | 1st Shift | $75,000 – $100,000 (DOE) | Direct Hire

Engauge Workforce Solutions is partnering with a precision machining operation in Racine, WI to hire a Manufacturing Engineer. This role is ideal for an engineer who enjoys working closely with production teams and supporting the full manufacturing lifecycle—from quoting to production launch.

The position works directly with Plant Manager, production leadership, and machine operators to support CAM programming, quoting, and process improvements across the shop.

Key Responsibilities

CAM Programming & Quoting

• Use SolidWorks and CAMWorks to generate machining programs and support quoting activities
• Develop G-code through CAMWorks to simulate machining processes and evaluate manufacturability
• Analyze customer prints and specifications to determine optimal machining strategies
• Generate accurate quotes by evaluating cycle times, tooling, materials, and process requirements
• Work with production teams to validate machining processes and ensure quote accuracy

Process Engineering & Production Support

• Develop machining routings and process strategies for production
• Troubleshoot machining issues with operators and leadership
• Optimize cycle times, tooling selections, and machining parameters
• Support new part introductions from quoting through production launch

Engineering & Documentation

• Create and maintain 3D models and 2D drawings in SolidWorks
• Maintain process documentation, routings, and work instructions
• Manage part data, BOMs, and documentation in the ERP system (Plex experience preferred)
• Support quality planning including PFMEA, control plans, and inspection strategies

Continuous Improvement

• Identify opportunities to improve machining processes and increase throughput
• Apply Lean manufacturing principles to reduce waste and improve efficiency
• Support production teams with ongoing troubleshooting and process improvements

Qualifications

• Bachelor’s Degree in Mechanical, Manufacturing, or Industrial Engineering
• 3–5+ years of engineering experience in a machining environment
• Strong experience with SolidWorks
• CAMWorks experience highly preferred
• Understanding of G-code and CNC machining processes
• Experience developing machining routings and cost estimates for quoting
• Familiarity with ERP systems (Plex preferred)
• Knowledge of Lean manufacturing principles
• Strong analytical, problem-solving, and collaboration skills

Note: CAMWorks experience is preferred but not required if the candidate has strong machining and quoting experience.

Compensation & Benefits

• Salary: $75,000 – $105,000 based on experience
• 1st Shift Schedule
• Direct Hire Opportunity
• Stable precision machining environment
• Opportunity to work directly with plant leadership and influence production strategy

Apply or Learn More

Call/Text: Caleb Vance – (313) 548-1689

Email:

If you're a hands-on manufacturing engineer who enjoys machining, quoting, and improving shop performance, we’d love to connect.

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

AMS Industries, Inc. is a MEP+ contracting firm serving the commercial, industrial, refrigeration and nuclear industries (PMT). With over 60 years of existence, AMS has grown from a small refrigeration contractor with a few employees to a multi-discipline and multi-market MEP contractor with more than 500 employees. We strive to meet our commitments to clients, develop our people and improve our communities.

The Onsite Project Manager will oversee the successful delivery of highly complex mechanical and MEP systems. This position requires an individual with expertise in design/engineering coordination, estimating, construction management, and strong client-facing communication. The Onsite Project Manager will serve as the primary point of contact between the field, subcontractors, and client representatives, ensuring the project is delivered safely, on time, and within budget.

Responsibilities:

• Manage the full project lifecycle onsite, from planning through closeout, with a focus on mission critical standards, reliability, and uptime requirements.
• Coordinate daily with field superintendents, foremen, subcontractors, and client representatives to ensure seamless execution of work.
• Interpret and communicate plans, specifications, and technical documents into actionable field tasks.
• Monitor and track project schedules, costs, manpower, and equipment to meet project deadlines and financial objectives.
• Prepare and manage RFIs, submittals, purchase orders, change orders, and progress billings.
• Evaluate and negotiate subcontractor and vendor quotations to ensure scope alignment and best value.
• Ensure strict adherence to quality assurance, safety, and compliance standards, especially those specific to mission critical environments.
• Lead onsite project meetings and provide accurate reporting to both internal leadership and client stakeholders.
• Identify risks and proactively implement strategies to resolve issues before they impact project performance.

Qualifications:

• Bachelor’s degree in Construction Management, Mechanical Engineering, or related field, or equivalent experience.
• 5+ years of project management experience in HVAC/MEP construction, with at least 2 years supporting mission critical or large-scale commercial projects preferred.
• Strong understanding of construction logistics, job cost accounting, and project financials.
• Proven ability to build and manage relationships with clients, subcontractors, and internal teams.
• Excellent written and verbal communication skills, with strong organizational and problem-solving abilities.
• Proficiency with Microsoft Office (Excel, Word, Project) and familiarity with construction management software (e.g., Autodesk Build, Spectrum ERP, or equivalent).

What we offer:

• Health Insurance and ESOP (Employee owned) package.
• Health Reimbursement Arrangement (HRA) with Medical PPO
• FSA and Dependent Care
• 401K Matching
• Paid Maternity & Paternity Leave
• Generous PTO roll-over policy
• Social events and outings throughout the year

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

• Perform accurate quantity takeoffs from blueprints, drawings, and specifications
• Analyze electrical diagrams and project plans to determine scope and installation requirements
• Utilize estimating software and tools to build comprehensive project estimates
  
  

• Identify labor, material, equipment, subcontractor, and vendor requirements
• Develop detailed cost estimates and bid proposals aligned with project specifications
• Solicit, review, and evaluate vendor and subcontractor quotes for accuracy and competitiveness
  
  

• Prepare RFIs, clarifications, and proposal documents for bid submissions
• Coordinate estimating timelines and ensure all deliverables meet bid deadlines
• Work closely with project management and operations teams to ensure alignment on project scope and pricing strategy
  
  

• Maintain organized documentation of estimates, assumptions, and bid details
• Communicate effectively with internal teams, clients, and partners throughout the estimating process
• Occasionally travel to job sites or client locations as needed
  
  

• Associate’s degree in Electrical Construction, Engineering Technology, or a related field (or equivalent experience)
• 3+ years of experience in electrical construction, estimating, or a related role
• Strong mathematical, analytical, and problem-solving skills
• Proficiency in Microsoft Excel and other Microsoft Office tools
• Excellent organization, communication, and time-management abilities
• Ability to work independently and manage multiple deadlines
  
  

• Bachelor’s degree in Business, Engineering, Construction Management, or related field
• 5+ years of experience in electrical or construction estimating
• Experience with industry estimating software (e.g., McCormick or similar platforms)
• Electrical field experience (e.g., Journeyperson) or relevant certifications
• Knowledge of applicable electrical codes and design standards
  
  

• Competitive compensation based on experience
• Full-time, stable career opportunity in a growing construction environment
• Comprehensive benefits package including health insurance, retirement plan, and paid time off
• Collaborative team culture with opportunities for professional growth
  
  

Electrical Field Engineer

• Location: Mount Pleasant, WI
• Contract: 6 month contract-to-hire
• Schedule: 8am-5pm (Monday-Friday, full onsite)
• Pay: $60-$70/hr

Must Haves:

• 7+ years of experience as a Project Engineer, Field Engineer, Construction Engineer, etc.
• Very strong experience in low voltage, inside electrical, power distribution
• Bachelors degree + in electrical engineering
• Ability to understand one-line drawings, cable schedules, switch gear packages, cable management, etc.

Plusses:

• Master’s degree in electrical engineering
• Expert in Excel & Bluebeam

What You’ll Do:

• Review and interpret electrical engineering drawings, including one-line diagrams, cable schedules, conduit layouts, and switchgear packages, ensuring alignment with project specifications and construction requirements.
• Collaborate with design engineers to review drawings and technical documentation, identify discrepancies or improvement opportunities, and communicate recommended updates to optimize constructability and system performance.
• Support the implementation of electrical designs in the field, working closely with construction teams to ensure installations align with approved drawings and engineering intent.
• Manage and maintain electrical drawing logs, redlines, and As-Builts, ensuring all field changes and updates are accurately documented and incorporated into final project records.
• Coordinate with engineering teams and subcontractors to resolve RFIs, technical questions, and design clarifications related to electrical systems.
• Provide technical support for electrical construction activities, including participation in construction planning, installation sequencing, and commissioning readiness.
• Track and report progress on electrical scopes of work, proactively identifying issues that could impact cost, schedule, safety, or quality and communicating them to the Project Manager.

• Support development and maintenance of project schedules, ensuring key milestones and deliverables are met
• Partner with project managers, field teams, and subcontractors to coordinate labor, materials, and equipment
• Assist in planning project workflows to maximize efficiency and productivity
  
  

• Maintain accurate and organized project documentation including drawings, RFIs, submittals, contracts, and change orders
• Track and manage project communications to ensure timely responses and alignment across stakeholders
• Assist in preparing and distributing project reports and updates
  
  

• Help monitor project costs, track expenditures, and flag potential budget variances
• Assist with estimating, bid support, and change order pricing as needed
• Support procurement and vendor coordination to ensure cost-effective material and service sourcing
  
  

• Work with project leadership to ensure all work meets applicable codes, standards, and contract requirements
• Participate in QA/QC processes, inspections, and documentation
• Support jobsite safety initiatives and compliance with company and regulatory requirements
  
  

• Act as a liaison between field teams, subcontractors, vendors, and clients
• Assist in coordinating project meetings, documenting minutes, and tracking action items
• Provide timely updates on project progress, risks, and key decisions
  
  

• Identify potential risks, delays, or field issues and help develop solutions with project leadership
• Support resolution of construction challenges to keep projects on schedule and within budget
  
  

• Bachelor’s degree in Construction Management, Engineering, or a related field (or equivalent experience)
• Strong organizational skills with the ability to manage multiple priorities
• Excellent communication and interpersonal skills
• Proficiency in Microsoft Office (Word, Excel) and construction software such as Bluebeam or similar tools
• Positive, team-oriented attitude with a strong work ethic
• Ability to thrive in a fast-paced, dynamic construction environment and adapt to new technologies
  
  

• Full-time position, with an average of 58 hours a week
• Competitive salary (commensurate with experience)
• Comprehensive benefits package including health insurance, 401(k), and paid time off
  
  

Description

Reporting to the General Manager the IT Manufacturing Systems Analyst will help to support and optimize our manufacturing operations through effective use of our information technology systems. This position will be responsible for analyzing, designing, implementing and supporting IT systems critical to our production environment, ensuring efficiency, accuracy, and data integrity.

This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time:

• Serve as a primary point of contact and subject matter expert for IT-related issues and projects within the manufacturing environment.
• Work with stakeholders to understand business goals and accordingly plan system roadmap and strategy.
• Collaborate with manufacturing, engineering, quality, and other cross-functional teams to understand their business needs and translate them into technical requirements.
• Analyze existing manufacturing systems and processes to identify areas for improvement, optimization, and automation.
• Participate in the selection, implementation, and configuration of new manufacturing systems, including ERP, MES, PLM, and other related applications.
• Manage relationships with vendors for new and existing software to optimize existing functions and identify new IT solutions that continue to meet the needs of the business.
• Act as a liaison between business groups and IT teams to discover, plan and coordinate IT projects and enhancements.
• Develop and maintain system documentation, including process flows, configurations, and user guides.
• Provide technical support and troubleshooting for manufacturing systems, resolving issues in a timely and effective manner.
• Assist in the development and execution of test plans for system implementations, upgrades, and modifications.
• Participate in training end-users on manufacturing systems and processes.
• Ensure data integrity and security within manufacturing systems.
• Develop and generate reports and dashboards to provide insights into manufacturing performance and identify trends.
• Contribute to the development and implementation of IT policies and procedures within the manufacturing context.
• Manage small to medium-sized IT projects related to manufacturing systems.
• Ability to work in a global team environment and coordinate with multiple IT teams as needed.
• Ability to learn and research to keep up with software trends and product releases in manufacturing industry to identify automation and process improvement opportunities

Requirements

Education:

Bachelor’s degree in information technology, Computer Science, Engineering, or a related field. Equivalent experience may be considered.

Experience:

• Minimum of 3 years of experience working as a Systems Analyst or in a similar IT role within a manufacturing environment.
• Strong understanding of manufacturing processes, such as production planning, shop floor control, quality management, and supply chain.
• Experience with one or more enterprise-level manufacturing systems (e.g., ERP - SAP, Workwise, Microsoft Dynamics; MES; PLM).
• Proven ability to plan and execute transition between old and new business systems and processes as needed.
• Proficiency in data analysis and reporting tools (e.g., SQL, Excel, Power BI).
• Excellent analytical, problem-solving, and troubleshooting skills.
• Strong communication, interpersonal, and collaboration skills, with the ability to effectively interact with both technical and non-technical stakeholders.
• Ability to manage multiple tasks and priorities in a fast-paced environment.
• Strong understanding of integrations between manufacturing systems and other business systems (e.g. ERP).

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions

• Thorough understanding of system development life cycle models and methodologies
• Thorough understanding of IT systems and processes
• Demonstrated effective interpersonal, verbal and written communication skills
• Ability to thrive in a diverse, collaborative, team-oriented environment where change occurs often
• Strong sense of initiative and a sense of urgency, demonstrated by accomplishing tasks; improving current work processes; and assisting others when necessary
• Unwavering attention to detail and commitment to world-class quality
• Ability to embrace deadlines
• Able to project a positive and professional demeanor to all internal and external contacts

Cutting Edge Design I Collaborative Team I Work with Major OEMs | Grow Your Design Skills

Drewco in Franksville, WI, is hiring a Design Engineer to work on unique, custom-tooling projects that require creativity, collaboration, and mechanical thinking. You can expect to develop your skills quickly in a hands-on, supportive engineering environment and move into taking on one-of-a-kind, interesting projects.

*Easy access off I-94, so great opportunity for anyone in Racine, Kenosha, or Southern Milwaukee Counties

What You'll Do

• Design workholding and custom tooling in SolidWorks

• Work directly with customers to understand requirements

• Create 3D models, assemblies, layouts, and detailed component drawings

• Calculate dimensions, clearances, and tolerances (GD&T) and create BOMs for manufacturing

• Collaborate with engineering, the shop floor, and sales

• Review your own work and assist in checking others'

• Manage projects from concept through release

What You'll Bring to the Team

• A commitment to quality, precision, and continuous improvement

• A self-motivated attitude with the ability to learn independently and work through challenging problems

• Natural mechanical intuition, ideally supported by hands-on manufacturing or shop experience

Requirements:

• Bachelor's degree in Mechanical Engineering (minimum two-year technical degree considered)

• 2+ years of mechanical design experience in a 3D modeling application

• CAD proficiency required, SolidWorks preferred.

• Experience detailing components.

• Prior mechanical component or assembly design

• Comfort spending most of your day on a computer, modeling and refining designs.

Preferred: fixturing/workholding, machining, or shop-floor experience

Benefits:

Drewco provides a competitive pay and benefits package, including flexible start times, health insurance, 401K, profit sharing, and a relaxed, friendly, productive environment.

Why Drewco?

At Drewco, we create one-of-a-kind workholding and tooling solutions for leading manufacturers across automotive, agriculture, mining, defense, and gear industries. We value collaboration, hands-on problem-solving, and engineers who take ownership of their work. Here, your designs come to life on real shop floors, you collaborate directly with customers and management, and your ideas make a tangible impact every day.

Build. Optimize. Scale.

GZ Printpak LLC is a U.S. manufacturer of high-quality paper packaging for consumer and luxury brands. Located in Mount Pleasant, Wisconsin, the company is part of GZ Media's international print and packaging division, which brings decades of engineering and manufacturing expertise to advanced packaging production.

As our U.S. facility continues to ramp up operations, we are seeking a Process Engineer who will take ownership of our production technology and ensure that our manufacturing lines run reliably, efficiently, and at the highest quality standards.

This is a hands-on engineering role focused on process ownership, production performance, and continuous improvement in a growing manufacturing environment.

Position Summary

The Process Engineer is responsible for the performance, stability, and optimization of manufacturing processes on our production lines. This role works closely with production, maintenance, and quality teams to ensure machines run consistently, produce high-quality parts, and operate at optimal efficiency.

The ideal candidate combines strong technical knowledge with a practical, hands-on approach to troubleshooting, process improvement, and operational support.

Key Responsibilities

• Own the manufacturing process for assigned production lines, ensuring stable, efficient, and high-quality production.
• Monitor production performance and analyze data to identify opportunities for process improvements and increased efficiency.
• Troubleshoot process issues, equipment behavior, and product quality deviations to quickly restore stable production.
• Work closely with operators and maintenance technicians to resolve technical challenges and improve machine performance.
• Develop and maintain process documentation, operating procedures, and setup instructions.
• Lead or support continuous improvement initiatives using Lean and data-driven methodologies.
• Implement process changes that improve reliability, throughput, and product quality.
• Support training for operators and technicians on process standards and best practices.
• Collaborate with equipment suppliers and internal teams when implementing process upgrades or technical improvements.
• Promote safe, standardized, and efficient manufacturing practices across the production floor.

Qualifications

• Bachelor's degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, or a related technical field.
• 3–5+ years of experience in a manufacturing engineering or process engineering role.
• Experience working with industrial production equipment and manufacturing processes.
• Strong analytical and problem-solving skills with the ability to translate production data into actionable improvements.
• Experience with Lean manufacturing, continuous improvement, or Six Sigma methodologies preferred.
• Ability to work collaboratively with production, maintenance, and quality teams.
• Hands-on mindset with the ability to troubleshoot and improve real-world manufacturing processes.

What We Offer

• Health, dental, and vision insurance
• 401k with company match
• Paid time off and company holidays
• Opportunity to take ownership of critical manufacturing technology in a growing U.S. operation backed by a global manufacturing leader

Join GZ Printpak

At GZ Printpak, engineers play a direct role in shaping how our manufacturing systems perform and evolve. If you enjoy solving real production challenges, improving complex processes, and taking ownership of manufacturing technology, we'd love to hear from you.

Equal Employment Opportunity

• GZ Printpak LLC is committed to providing equal employment opportunities to all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.

At a Glance

• 
  
• Company: Tecomet (Full Time Position)
  
• Location: Somers, WI
  
• Job Type: Full-Time | Contract | On-Site
  
• Shift: Flexible / TBD
  
• Pay Range: $30.00 – $35.00/hour
  
• Work Authorization: U.S. Citizen or Green Card (ITAR compliance)
  

---

Why This Role Exists

Tecomet is a global leader in high-precision manufacturing for the medical, aerospace, and defense sectors. We're hiring an experienced EDM Sinker – CNC Machinist III for a full-time opportunity to support mission-critical work involving precision-machined components.

This role focuses on operating and setting up EDM sinkers, mills, lathes, and wire EDM machines in a clean, well-maintained manufacturing environment. You'll play a key role in meeting high-tolerance, high-impact production goals.

---

The Work You’ll Be Doing

• 
  
• Set up and operate EDM sinkers, CNC mills, lathes, and wire EDMs
  
• Read and evaluate blueprints, specifications, and technical drawings
  
• Propose new setups and adjust tooling, offsets, and feeds/speeds
  
• Troubleshoot CNC programs and machining issues
  
• Perform in-process inspections using micrometers, indicators, and calipers
  
• Collaborate with Engineering on fixture design and process improvements
  
• Maintain production records and follow GMP/GDP documentation standards
  
• Support 5S, Lean, and continuous improvement initiatives
  
• Adhere to strict safety, quality, and preventative maintenance practices
  

---

Machines, Materials & Tools

• 
  
• Machine Types: EDM sinkers, CNC mills, CNC lathes, wire EDMs
  
• Tools: Micrometers, calipers, indicators, hand deburring tools
  
• Controls: G-code familiarity and minor programming required
  

---

What We’re Looking For

Required:

• 
  
• 5+ years of CNC machining experience (EDM preferred)
  
• High School Diploma or GED
  
• Strong setup skills across multiple machine platforms
  
• Ability to troubleshoot and make minor program edits
  
• Solid math, measurement, and blueprint reading skills
  
• U.S. Person status for ITAR compliance
  

Preferred:

• 
  
• Associate’s degree or Machinist apprenticeship
  
• Familiarity with medical/aerospace standards
  
• Background in multi-axis machining and advanced materials
  

---

Why Work with Tecomet

• 
  
• Full time Opportunity at a highly respected precision manufacturing company
  
• Work with advanced machining technology in a climate-controlled environment
  
• Competitive hourly rate: $30–$35/hour
  
• Make an immediate impact supporting critical industries
  

---

Apply Now

If you're a skilled EDM or CNC Machinist looking for a high-impact contract role in a professional shop environment, Tecomet is hiring now.

Apply today or message us to learn more.

Putzmeister Inc

Business Project Manager

Sturtevant, WI

Summary: The Business Project Manager will report to the President and lead the completion of key business initiatives. These initiatives will focus on areas such as sales channel development, product marketing projects, product launch projects, business efficiency initiatives, and organizational development efforts. The Business Project Manager will collaborate across departments to ensure projects stay on schedule and achieve their objectives. These projects are typically large, lasting between 6 months and 18 months. This is a crucial role, a role of internal consultant for key business initiatives, that will support the company's growth and offer valuable cross-departmental experience for the Business Project Manager.

Essential Duties and Responsibilities:

• Define project scope, objectives, and deliverables in collaboration with departments.

• Develop detailed project plans, schedules, and budgets that ensure compliance with standards.

• Facilitate and collaborate with departments to complete projects on time.

• Execution, monitoring, and tracking project progress and performance, managing changes, and maintaining quality standards.

• Provide regular updates and reports to leadership.

• Identify potential issues, develop improvement strategies, and resolve obstacles.

• Improve company efficiency, reduce costs, and increase business growth.

• Serve as the key link to ensure alignment with company strategy.

• Drive engagement and influence decision-making to align project results with business objectives.

• Performs additional duties as assigned or directed.

Qualifications:

• Business consultancy experience preferred.

• Minimum of 5 years of project management experience within the manufacturing industry.

• Proven ability to manage complex projects

• High-level analytical, problem-solving, and decision-making skills

• Excellent interpersonal and communication skills

• Solid technical skills combined with a strong business understanding

• Self-motivated individual capable of working independently and in team settings

• Strong work ethic

• Willing and able to travel up to 35% as needed

Education/Certification/Training:

• Bachelor's degree in business or engineering with a minor in business

Work Environment/Physical Demands:

 While performing the duties of this job, the employee is in a typical office or shop environment; occasionally exposed to noise, dust, and chemicals.

 Safety glasses/goggles must always be worn while in the shop or yard.

The physical demands described here are representative of those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

The above information includes the general details necessary to describe the principal duties of the job identified. It shall not be interpreted as a detailed description of all the work requirements that may be inherent in the job.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

• Day 1 Benefits: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance.
• Paid holidays, earn vacation time, and sick leave accrual from day one.
• 401(k) Profit Sharing Plan after 90 days.
• Additional benefits: pet insurance, maternity/paternity leave, employee assistance programs, discount programs, tuition reimbursement program, and more!

• Maneuver tractor into position to attach trailer and handle lines to secure.
• Operates truck in a safe manner in compliance with all local, state, and federal regulations and company policies.
• Inspect tractor-trailer equipment for defects pre/post trip and submit DOT inspection report indicating condition.
• Operates Driver Delivery Handheld (DDH), document delivery receipts/product temperatures and exceptions. Inspects trailer to ensure product is secure for undamaged transport of product.
• Rides and trains with Driver Trainer of tractor-trailer to various destinations, gaining knowledge of commercial driving regulations and observing the Driver's skill in starting engine properly, approaching intersections, making turns, backing, parking, and maneuvering vehicle on the road and on customer premises.
• Maintain driver log (Manual or PeopleNet) according to DOT regulations, documenting delivery receipt, product temperatures and exceptions.
• Assists the Driver in unloading trailer and delivering product into customer premises.
• Provides customer service including on-time delivery of undamaged product, product returns and issuing valid customer credits.
• Other duties as assigned.

• High School Diploma or GED preferred.
• Possess a Class A CDL.
• Be at least 21 years of age.
• Meet eligibility requirements in the McLane Transfer and Promotion Policy.
• Ability and willingness to select/load/unload and/or deliver ALL products that may be ordered by McLane customers.
• Read and comprehend labels, instructions, and bills of lading.
• Perform mathematical calculations to verify quantities of product.
• Communicate with customers, management, and other teammates.
• Safely drive a tractor-trailer, use a 2-wheeled dolly, ramp, and on board PeopleNet devices.
• This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards.

• Safety-focused
• Reliable
• Adaptable
• Dedicated