Engineering Jobs in Graham Pierce County Wa Flexible
163 positions found
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Aircraft Structures Mechanic to join our Fabrication team in Puyallup, Washington.
As an Aircraft Structures Mechanic, you will utilize your manufacturing knowledge to set up tools and equipment for drilling and fastening complex structures, including composite materials. You will operate various hand and machine tools, including automated equipment, to perform tasks according to specifications while ensuring safety and quality standards. Your responsibilities will include recognizing and reporting any equipment malfunctions, performing maintenance, and coordinating the movement of materials and tools. You will also cut, assemble, and install components, verify your work against specifications, and handle hazardous materials safely.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Review daily reports and consult with team leaders to determine job assignments and obtain necessary documentation.
Locate work areas using specified drawings and paperwork.
Verify kitted parts against installation plans and bill of materials, ensuring they are suitable and defect-free.
Retrieve non-kitted parts from designated areas, ensuring compliance with specifications.
Use electronic devices to access work instructions and engineering data (personal cell phones not permitted).
Select and utilize appropriate hand and power tools for assembly tasks, including precision alignment equipment.
Move kits, carts, and equipment within the work cell as needed.
Load/unload jigs and operate mechanical lifts for assembly work.
Locate tools and parts on aircraft using specified methods and set up assembly tools per instructions.
Handle hazardous materials safely and dispose of them properly.
Inspect completed work for defects and cleanliness before submission for inspection.
Perform minor rework and maintain tool control in accordance with procedures.
Maintain personal and tool certifications and seek assistance from supervisors when necessary.
Set up tools and equipment for drilling and fastener installation in complex structures.
Operate various hand and machine tools, monitoring equipment functionality and performing routine maintenance.
Coordinate the movement and preparation of materials and tools for tasks.
Cut, file, drill, and assemble parts, ensuring proper fitting and quality standards.
Conduct reaming, riveting, and sealing operations, applying corrosion inhibitors as needed.
Utilize calibrated tools to verify work against specifications and ensure quality.
Manage equipment and materials within the work cell to ensure efficient workflow.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout:
To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications:
1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, shipbuilding or similar industry. This can include education and military experience.
1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications. This can include education and military experience.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to lift up to 35 pounds.
Proficiency in reading, writing, and speaking English.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug. 09, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician to join our Electronics team in Auburn & Puyallup, Washington.
In this role, you will be empowered to apply your technical expertise and creativity to solve complex challenges in cutting-edge aerospace technology. You’ll work with a diverse team to develop, test, and maintain advanced electronic systems that are critical to the success of our aircraft. This position offers a dynamic environment where innovation, precision, and continuous learning are valued, giving you the chance to grow your skills while making a tangible impact on aviation excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform electronic and software testing, diagnosis, troubleshooting, adjustment, repair, calibration, checkout, and maintenance of electronic systems and associated equipment, often developing and improvising service procedures as needed.
Fabricate, assemble, and test developmental and prototype mechanical, electrical, electromechanical, and electronic assemblies, including those utilizing software/firmware applications.
Lead, instruct, and review the work of employees in lower classifications assigned to fabricate, assemble, test, calibrate, repair, modify, maintain, and service electronic equipment and systems.
Operate and utilize test equipment, instruments, tools, and machines required to complete work assignments.
Interpret and work from block diagrams, schematic diagrams, prints, specifications, technical information, manufacturing records, sketches, and verbal instructions.
Perform design and fabrication work related to packaging developmental assemblies, including mechanical and assembly fabrication, with engineering assistance.
Maintain certifications, licenses, and permits necessary for work assignments.
Prepare reports, maintain records, and ensure accountability of contract tools and test equipment.
Devise and build temporary tools and work-around methods to facilitate troubleshooting and repair.
Handle and protect components and assemblies in accordance with shop practices, procedures, and drawing requirements.
Prioritize work assignments as directed by leads or supervisors and obtain necessary engineering drawings and test documents when not provided.
Set up and perform bench or automatic tests per work orders, test documents, equipment manuals, and engineering instructions.
Troubleshoot faults in electronic circuits and hardware, adjusting, repairing, or replacing components as required.
Select and use appropriate hand, power, and bench tools to perform required operations.
Maintain test equipment through periodic maintenance and monitor certification dates.
Troubleshoot and repair computerized test systems.
Handle and dispose of hazardous materials safely, following Safety Data Sheets (SDS) and using personal protective equipment.
Pack electronic equipment for travel according to drawings and Boeing specifications.
Verify work quality after each operation to ensure compliance with drawings and standards.
Prepare completed or reworked jobs for inspection.
Communicate with leads, supervisors, engineers, or planners when assistance or clarification is needed, especially regarding drawings, paperwork, or discrepancies.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications:
Ability to lift, push, and pull up to 35 pounds.
3+ years of experience using electronic test equipment.
3+ years of hands-on experience with power and control electronics circuit design, product design and manufacturing.
3+ years of experience testing and troubleshooting electronics and electrical systems.
Preferred Qualifications:
UL Certified Electrician.
Conflict of Interest:
Successful candidates for this job must successfully satisfy the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $33.32/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Prospect Construction is a Heavy Civil Contractor that specializes in water and wastewater treatment plants, hydraulic structures/facilities, shoring systems, large concrete tanks, pump stations/process facilities, dewatering, major excavations, structural steel, process equipment, and mechanical systems. Prospect began as a General Contractor in 1998, with our first office location in Puyallup Washington. Over the last few decades, Prospect has coupled its expertise in complex projects with its vast level of self-performance to grow into one of the premier treatment plant contractors in the West. This continued growth has allowed Prospect to bring our expertise into new geographical regions, with the establishment of our offices in Missoula, Montana and Sheridan, Wyoming.
Why do we exist? Prospect Construction seeks to glorify God by providing opportunities for our employees to utilize their unique gifts through construction to benefit and serve our families, stakeholders, and community. What do we do? We construct unique, complex, and challenging projects for our clients throughout the west.
Description Summary:
The Chief Heavy Civil Estimator is responsible for leading the company’s heavy civil estimating strategy, execution, and team development across all offices. This role will oversee a group of estimators operating from a centralized estimating location and will support bids for projects throughout the company’s footprint.
This position is a key leadership role in expanding the company’s heavy civil capabilities into new and existing markets including dams and water resource infrastructure, mass grading, mining support infrastructure, underground utilities, pipelines, and large-scale site development. The Chief Heavy Civil Estimator will produce accurate, complete, and competitive estimates and will build repeatable estimating systems that drive profitable growth.
Essential Duties and Responsibilities for Civil Estimator:
- Lead and manage a team of estimators responsible for heavy civil bids across all offices.
- Assign estimating responsibilities, coordinate workloads, and ensure bid schedules are met.
- Develop and mentor estimating staff through coaching, training, and performance feedback.
- Establish clear estimating workflows, standards, review processes, and deliverables.
- Lead preparation of competitive and complete estimates for heavy civil and large development pursuits.
- Perform detailed quantity takeoffs, pricing, labor and equipment productions, and bid-leveling.
- Develop pricing strategies and collaborate with leadership to determine bid markups, general conditions, contingency, and schedule impacts.
- Coordinate bid reviews and executive-level presentations prior to submission.
- Support expansion into new heavy civil markets and project types including:
- Dams / levees / water infrastructure
- Mass grading / earthwork
- Mining and mine infrastructure
- Wet and dry utilities
- Pipeline – Water/Sewer/Oil/Gas
- Large developments and site infrastructure
- Build estimating models, assemblies, means-and-methods assumptions, and productivity benchmarks for emerging work types.
- Identify equipment needs, subcontractor requirements, and labor production assumptions to support new civil capabilities.
- Ensure all estimates include complete scope coverage, clear assumptions, and appropriate risk allocation.
- Identify project risks and opportunities including logistics, access, production constraints, seasonal impacts, and design ambiguities.
- Support constructability reviews and sequencing concepts that align with execution strategies.
- Ensure the bid complies with owner requirements, bid forms, and proposal instructions.
- Solicit subcontractor pricing and scope input for specialty work (dewatering, drilling, blasting, shoring, etc.).
- Evaluate subcontractor quotes for completeness and accuracy; manage bid leveling and scope alignment.
- Assist in development of strategic partnerships for emerging markets and scopes.
- Maintain and improve a heavy civil cost database including labor, equipment, materials, trucking, and subcontractor benchmarks.
- Track estimate performance and contribute to lessons learned based on job cost results and field feedback.
- Coordinate with operations, project management, and field leadership to validate means/methods and production assumptions.
- Participate in turnover meetings and support transition from bid to execution.
- Assist operations in early project planning, budgeting, and buyout strategy as needed.
Knowledge & Skills:
- Minimum of 10 years of experience as a Civil Construction Estimator
- Proven experience leading estimating efforts on complex heavy civil projects
- Demonstrated success managing or mentoring estimators and leading bid teams.
- Strong understanding of:
- Heavy civil means and methods
- Equipment spreads and production rates
- Construction scheduling impacts
- Labor, trucking, and material pricing models
- Risk management and bid strategy
- Advanced understanding of data analysis methods
- Familiarity with civil estimating computer software
- Ability to interpret civil plans, specs, geotechnical reports, contract terms and design documents
- Strong written and verbal communication skills and ability to present to senior leadership
- Highly organized, deadline-driven, and capable of managing multiple concurrent pursuits
- Critical-thinker and problem-solver
- BA in engineering, construction science or similar relevant field
- Experienced with HCSS and Timberline estimating software
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Skin & Spar Surface Finish Technician to join our Fabrication team in Auburn, Algona and Puyallup, Washington.
Join our dynamic team as a Skin & Spar Surface Finish Tech, where precision meets innovation in the aerospace industry. In this pivotal role, you will leverage your expertise in interpreting blueprints and engineering specifications to execute meticulous surface finishing and conditioning on critical components such as milled skins and spars. Utilizing advanced templates and jigs, you will ensure optimal positioning for finishing operations, while employing a variety of hand and power tools to achieve exceptional quality standards. Your keen eye for detail will be essential as you diagnose discrepancies, perform thorough inspections, and conduct necessary rework to meet stringent gauge tolerances. Collaborating closely with supervisors and engineering teams, you will navigate complex work orders and utilize online systems to prioritize tasks effectively. Your commitment to safety and compliance will shine through as you handle hazardous materials responsibly and maintain certifications. If you are passionate about delivering excellence in aerospace manufacturing, we invite you to be a part of our mission to shape the future of flight.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Work from blueprints, templates, detail drawings, and verbal instructions to perform surface finish/conditioning on coordination holes in milled skins and spars.
Use templates and jigs to properly position parts for subsequent finishing operations, including reaming, countersinking, and cold work.
Scribe tooling locations and reference lines as specified in engineering drawings and specifications.
Diagnose and correct any detected discrepancies in parts and processes.
Check finished parts to ensure they meet quality requirements and specifications using precision measuring instruments (e.g., micrometers, trammels, probes).
Use hand and power tools, including air motors, reamers, and cold-work guns, to perform finishing duties on machined parts.
Operate ground-controlled handling equipment to load, unload, and move parts within the shop.
Perform rework as required, including filing, scraping, sanding, grinding, and hand finishing to meet gauge tolerances.
Locate points and holes from established reference lines or index points using prints, templates, and work orders.
Perform visual and functional checks on tools and accessories, making necessary adjustments and ensuring they are in good condition.
Access workload using online computer systems and assign work based on priority or Team Leader direction.
Review Work Order (W/O) to determine work requirements and ensure prior operations are complete.
Consult with supervisor/team lead and other sources (e.g., engineering, planning, inspection) to resolve problems.
Call for inspection or use SI&A as required throughout the process, including checking hole sizes and inspecting countersinks.
Handle and dispose of hazardous materials in an approved manner while maintaining personal and tool certifications, ensuring compliance with safety standards.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Basic computer experience and competency.
Experience using basic math (e.g. addition, subtraction, multiplication and division).
1+ years of experience or training in reading and interpreting drawings or blueprints.
2+ years of experience using hand tools and/or hand-held power tool
Able to close tolerance drill within .003 and able to precision measure between .003.
Able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Preferred Qualifications:
2+ years of experience providing close tolerance measurements and cuts on close tolerance holes.
Ability to close tolerance.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 23, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities
Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes
Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.
Determine and/or develop methods where procedures may not be available.
Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
Operate, use and maintain overhead maintenance work platforms
Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
Inspect and maintain building runway rails and expansion joints.
Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
Maintain logs, charts, and perform written and verbal tie-in records.
Prepare reports and schedules as required.
Work with and assist employees of other classifications as required.
Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications
2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances
2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.
This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
Able to lift up to 35 pounds.
Preferred Qualifications:
Experience inspecting and maintaining building runway rails and expansion joints.
Preference given to those with 2 years overhead crane experience.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for all shifts
Total Rewards & Pay Transparency
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: 33.32 – 61.01
Applications for this position will be accepted until May. 29, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance
Security Clearance Type:
Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. The Hardware in the Loop (HWIL) Department in Tucson, AZ is a multi-discipline organization responsible for designing, building and integrating state of the art testing environments (flight simulators for missiles), as the last step before flight test. On our team, you will work with weapon system designers to understand requirements, design solutions, integrate, and deploy the systems to help support tactical software development, testing, and delivery for missiles to the warfighter.
Collaborate in a multi-disciplinary team to develop software to control Hardware-In-the-Loop (HWIL) facilities (flight simulators for missiles).
Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition. Ensures hardware and software standards are met.
Designs and implements build procedures that are used to support hardware and software product development and use.
Software design, coding and integration in a real-time environment.
May train software developers in the use of configuration management tools and the implementation of software quality standards. Typically requires a Bachelor's degree in Computer Science, Engineering or other STEM related field and a minimum of 5 years of relevant experience.
Experience with software development in C++, using the object-oriented features.
Embedded Software, Embedded Software Security, Embedded Operating Systems (Linux, RTOS, VxWorks, etc), Software Architecture Design and Implementation.
S. government issued security clearance is required prior to start date with the ability to obtain program access after start.
Strong organization, coordination, planning, teaming skills, as well as written and oral communication skills.
Experience with RF theory and application in systems.
Experience with electronics design and/or conducting data analysis using tools such as Matlab.
Experience troubleshooting systems using test equipment such as oscilloscopes, logic analyzers, network analyzers, and/or spectrum analyzers.
Knowledge of networking and IP addressed based equipment.
Experience with both Windows and Linux operating systems.
Agile and Scrum team member experience
Knowledge of or experience with software languages such as Java, C, C++, or similar languages; scripting languages such as Python and/or Perl, and MATLAB scripts for data analysis purposes.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Offered Based On Eligibility
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
~ Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round.
Virtual Fly Over City of Tucson & Community, YouTube Video Links
"As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance
Security Clearance Type:
Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. The Hardware in the Loop (HWIL) Department in Tucson, AZ is a multi-discipline organization responsible for designing, building and integrating state of the art testing environments (flight simulators for missiles), as the last step before flight test. On our team, you will work with weapon system designers to understand requirements, design solutions, integrate, and deploy the systems to help support tactical software development, testing, and delivery for missiles to the warfighter.
Collaborate in a multi-disciplinary team to develop software to control Hardware-In-the-Loop (HWIL) facilities (flight simulators for missiles).
Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition. Ensures hardware and software standards are met.
Designs and implements build procedures that are used to support hardware and software product development and use.
Software design, coding and integration in a real-time environment.
May train software developers in the use of configuration management tools and the implementation of software quality standards. Typically requires a Bachelor's degree in Computer Science, Engineering or other STEM related field and a minimum of 5 years of relevant experience.
Experience with software development in C++, using the object-oriented features.
Embedded Software, Embedded Software Security, Embedded Operating Systems (Linux, RTOS, VxWorks, etc), Software Architecture Design and Implementation.
S. government issued security clearance is required prior to start date with the ability to obtain program access after start.
Strong organization, coordination, planning, teaming skills, as well as written and oral communication skills.
Experience with RF theory and application in systems.
Experience with electronics design and/or conducting data analysis using tools such as Matlab.
Experience troubleshooting systems using test equipment such as oscilloscopes, logic analyzers, network analyzers, and/or spectrum analyzers.
Knowledge of networking and IP addressed based equipment.
Experience with both Windows and Linux operating systems.
Agile and Scrum team member experience
Knowledge of or experience with software languages such as Java, C, C++, or similar languages; scripting languages such as Python and/or Perl, and MATLAB scripts for data analysis purposes.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Offered Based On Eligibility
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
~ Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round.
Virtual Fly Over City of Tucson & Community, YouTube Video Links
"As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
*EOE Statement:*
A&C is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law.
Founded in 2000, A&C is a multi-discipline design firm providing quality services that are responsive to the needs of the client. A&C’s culture promotes creativity and collaboration amongst disciplines and employees fostering the best designs for clients.
*Description: *
Aubertine and Currier provides quality architectural, engineering, and surveying services through innovative and efficient design, highly responsive service, and lasting relationships in order to create a positive impact in the communities we serve.
A&C is seeking a *Licensed Civil Engineer* to join our Civil Engineering Department at our office located in Watertown, NY.
The successful candidate will work with our Civil Engineering team working on designs related to land planning, site, roadway, and utility infrastructure design. Being a relatively smaller design firm, this position will also include such duties as construction inspection, AutoCAD drafting, project design, preliminary design markups, design calculations, report preparation, client meetings and board meeting presentations. Within this position you will work managing projects under the general guidance of a principal.
This position will require fieldwork travel.
Aubertine and Currier offers a comprehensive benefit packing including competitive wage rates, paid time off, medical insurance, company sponsored 401K plan, profit sharing plan, and paid technical training and educational loan reimbursement programs.
*Desired Skills and Qualifications:*
· Bachelor’s Degree in Engineering or Engineering Technology required
· Registration as a Professional Engineer (P.E.)
· 6 - 12 years of qualifying civil engineering design experience
· Proven technical background in civil engineering
· Ability to develop proposals to help obtain future work
· Successful experience in site design, roadway design for subdivisions and local roads, drainage analysis and design, development of plans, specifications and cost estimates.
· Ability to produce contract documents and project management experience
· Strong verbal and written communication skills
· Strong organizational and interpersonal skills to work efficiently with team members and clients.
· Ability to meet project demands and deadlines
*Pay Rage:*
A&C is committed to offering fair and equitable compensation. The pay range listed is an approximation of our good faith effort to provide an anticipated wage range. The specific salary offered is dependent on the candidate’s relevant experience, education, certifications, and licensure.
Pay Range: $36 - $48 / hour depending on experience
*Category:* Engineering
*Full Time/Part Time: *Full Time
*Exempt/Non Exempt :* Non Exempt
Job Type: Full-time
Pay: $36.00 - $48.00 per hour
Expected hours: 40 – 50 per week
Benefits:
* 401(k)
* 401(k) matching
* Dental insurance
* Health insurance
* Health savings account
* Life insurance
* Paid time off
* Tuition reimbursement
* Vision insurance
Ability to Commute:
* Watertown, NY 13601 (Required)
Ability to Relocate:
* Watertown, NY 13601: Relocate before starting work (Required)
Work Location: In person
Remote working/work at home options are available for this role.
Position Responsibilities: · Maintain accurate records, in excel or notes, to support or verify correct allocations that need to be submitted by product and business · Collaborate and respond to requests from sales, marketing, and supply chain operations to support MDS customer service excellence · Partner cross-functionally to correct issues impacting customer delivery or various escalation requests · Monitor inventory reports and alert network team to move product when inventory is in the incorrect DC/storage location · Participate in meetings with key stakeholders to review allocation status for the team or BOTs · Learn, gain access to, and leverage various systems in support the requests, including SAP, Power BI, SharePoint, or Excel, and navigate challenges with minimal supervision as proficient from training · Comply with all local, state, and federal safety regulations, policies, and procedures, including Hazardous waste regulations, through consistent application of sound quality assurance principles Position Qualifications: · 2-6 years of experience in supply planning, distribution, order management, or other supply chain environment · Strong Problem solving, good communication/customer service skills, and discipline to learn · Experience utilizing SAP is preferred · A minimum of a Associate’s Degree in Supply Chain, Production Engineering, Business, Logistics, Operations Management, or other relevant field Note: This is a W2 contract role – C2C & 3 rd party candidates WILL NOT be considered .
Remote working/work at home options are available for this role.
Mindlance is here to help you to find the perfect fit with just the right company.
Currently, we are seeking an Accounts Payable Clerk for an exciting career growth opportunity.
Make your next big career move with the kind of position that will allow you to be genuinely passionate about the work you do! Our recruiters will work closely with you to help you get the edge over the competition.
Let Mindlance advocate for you – apply today! “Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.” Job Title: IAM Engineer Job Category: IT Industry: Airlines Job Location: Remote Pay rate: $ $70-78/hr on w2 Duration: 7+ Months IAM Engineer Job Description Job Details: Notes: Strong Microsoft EntraID experience and passwordless multi-factor authentication experience.
Top 5 Skill sets · Configuring authentication (OIDC, SAML, OAuth) for applications · Microsoft Entra conditional access policies · Experience with enabling MFA and SSO · Migration of applications between Identity Platforms/Providers · Developing automation/scripts to support onboarding of applications and users to Identity platforms Nice to have skills or certifications: · Duo Experience, Microsoft Entra, Oracle Access Manager · Enable Microsoft Entra app proxy · CISSP or Azure Certifications · This is a senior-level position that will execute the implementation of designs and requirements provided by IAM architects · and analysts and ensures that IAM capabilities and services are successfully integrated within systems across the · organization while also providing ongoing support and maintenance as needed for IAM processes and technology.
Job Summary The IAM Security Engineer is responsible for implementing, integrating, and supporting authentication and authorization solutions aligned with Cybersecurity and Digital Risk (CDR) principles.
This role focuses on protecting enterprise data, reducing security risk, and enabling secure access for the Client workforce.
The Senior IAM Engineer will lead the implementation and support of modern enterprise Workforce IAM systems.
They will collaborate closely with cross-functional development teams, architects, analysts, and business stakeholders to ensure secure identity solutions are integrated throughout the product lifecycle.
This role serves as a key technical contact for IAM authentication and authorization services across the organization.
Essential Job Accountabilities (Core responsibilities accounting for 10% or more of the role) 1.
IAM Platform Implementation & Support (40%) · Implement, administer, and support workforce IAM platforms including Oracle Access Manager (OAM), Microsoft Entra, and Duo.
· Design, configure, and troubleshoot authentication and authorization solutions throughout the SDLC.
· Support automated migration of applications from Oracle Access Manager to Microsoft Entra.
· Onboard and integrate new applications with Microsoft Entra.
· Perform detailed root cause analysis of IAM issues and implement preventative solutions.
· Engineer scalable, secure, and high-performance IAM solutions.
2.
IAM Process Engineering & Automation (20%) · Develop, enhance, test, document, and maintain IAM integration processes.
· Simplify and automate access management workflows to improve user experience.
· Architect and implement accelerators and automation enablers for IAM operations.
· Identify optimization opportunities and execute strategies to improve efficiency, scalability, and service delivery.
Job Title: IAM Engineer Job Category: IT Industry: Airlines Job Location: Remote Pay rate: $ $70-78/hr on w2 Duration: 7+ Months Email Qualified Resumes to: IAM Engineer Job Description Job Details: Notes: Strong Microsoft EntraID experience and passwordless multi-factor authentication experience.
Top 5 Skill sets · Configuring authentication (OIDC, SAML, OAuth) for applications · Microsoft Entra conditional access policies · Experience with enabling MFA and SSO · Migration of applications between Identity Platforms/Providers · Developing automation/scripts to support onboarding of applications and users to Identity platforms Nice to have skills or certifications: · Duo Experience, Microsoft Entra, Oracle Access Manager · Enable Microsoft Entra app proxy · CISSP or Azure Certifications Job Summary The IAM Security Engineer is responsible for implementing, integrating, and supporting authentication and authorization solutions aligned with Cybersecurity and Digital Risk (CDR) principles.
This role focuses on protecting enterprise data, reducing security risk, and enabling secure access for the Client workforce.
5.
Metrics, KPIs & Operational Support (10%) · Support delivery of IAM metrics and KPIs through system analysis and integrations.
· Provide ongoing operational support and maintenance for IAM services and processes.
Required Qualifications & Experience IAM & Security Expertise · In-depth knowledge of Workforce IAM, Single Sign-On (SSO), and Multi-Factor Authentication (MFA).
· Proven experience onboarding SSO applications and integrating MFA with cloud-based identity providers.
· Strong understanding of modern authentication protocols and standards: o FIDO2, SAML, OAuth, OIDC, Kerberos, Federation · Hands-on experience with: o Passwordless authentication o API Gateways o SCIM connector development o Identity platforms such as Microsoft Entra, Duo, Oracle Access Manager, Ping Identity, Okta, or ForgeRock Compliance & Risk · Practical knowledge of compliance and regulatory frameworks: o SOX, PCI, FAA, GDPR, PII · Strong understanding of Zero Trust architecture, adaptive risk-based authorization, identity proofing, and verification technologies.
· Familiarity with security frameworks and governance standards: o ISO, NIST, CSA Controls Matrix Technical & Industry Experience · Experience with large-scale identity transformation initiatives, including migration from on-premise to cloud-based IAM services.
· Prior experience implementing passwordless technologies in large enterprise environments.
· Experience supporting IAM functions within the airline or transportation industry (preferred).
· Exposure to AI/ML, algorithm development, or automation-driven technical solutions (preferred).
Software Development & Delivery · Expertise in modern software development lifecycles and Agile methodologies.
· Experience with automated cloud infrastructure deployment.
Core Competencies · Strong written and verbal communication skills; ability to communicate with both technical and non-technical audiences.
· Excellent attention to detail with qualitative and quantitative data.
· Strong analytical and problem-solving skills with the ability to adapt quickly to changing priorities.
· Demonstrated initiative and ownership of deliverables and outcomes.
Remote working/work at home options are available for this role.
