Engineering Jobs in Glendale, CO

CCS Facility Services is one of the largest building service contractors in the United States, providing expert janitorial and facility engineering services to thousands of commercial businesses with a deep bench of experienced cleaning and engineering professionals. Guided by a Service Heart we are a company Built to Serve with a passion to exceed our customer's expectations.

CCS Facility Services es uno de los proveedores de servicios para edificios ms grandes de los Estados Unidos, que brinda servicios de limpieza e ingeniera de instalaciones y edificios a miles de empresas comerciales con un amplio grupo de profesionales experimentados en limpieza e ingeniera. Guiados por un Corazn de Servicio, somos una empresa dedicada a Servir con pasin para superar las expectativas de nuestros clientes.

A Janitor is responsible for keeping the workplace clean, organized, and disinfected. The requirements listed below are responsibilities and skill requirements.

Essential Duties and Responsibilities:

• Clean the interior of buildings, including floors, carpets, rugs, windows and walls, and general tasks.
• Vacuum, sweep, and mop floors. (Offices, rooms, hallways, lobbies, lounges, elevators, stairs, locker rooms, and other work areas).
• Cleaning stains from chairs and upholstered furniture.
• Keep furniture free of dust. As well as lighting fixtures, marble surfaces, and moldings.
• Leaving empty trash cans, as well as cleaning trash cans and ashtrays.
• Disinfect commonly used items such as desks, door handles, office tools, and phones.
• Clean and maintain restrooms, as well as replenish supplies in this area and where required.
• Washing and cleaning windows and mirrors.
• Empty trash and recycling containers to the disposal area.
• Clean trash and snow from sidewalks if necessary.
• Maintain the inventory of cleaning supplies in stock and, if applicable, request missing materials from your supervisors.
• Notify supervisors of unsafe conditions or conditions requiring maintenance.
• Maintain a cleaning chart indicating the areas that were cleaned and inspected.
• Follow safety and precaution rules.
• Must be able to lift up to 50 pounds.
• Close doors at the end of the night shift.

Competencies: To perform the job successfully, an individual should demonstrate the following competencies:

• Attendance/Punctuality- Is consistently at work and on time.
• Dependability- Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan
• Safety and Security- Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and risk of electrical shock and vibration.
• The noise level in the work environment is usually moderate

CCS Facility Services business foundation is our people. We recognize, invest, and promote from within. Unified by our core values, you will discover a sense of community with amazing colleagues who are passionate and guided by a Service Heart to provide the best employee and customer experience.

Position - Network Architect

Location: Denver, CO (Hybrid)

Long Term Contract

Unable to provide sponsorship for this role.

Job Description:

As a Network Architect, you will be responsible for the strategic design, planning, and security of our organization's network infrastructure. You will oversee the integration of advanced technologies to support the demands of both our on-premise data centers and cloud services, ensuring a resilient, scalable, and highly secure network.

Responsibilities

• Lead the design and development of network architectures, roadmaps, and technical specifications for enterprise-level networks, encompassing on-premise data centers and hybrid cloud environments.
• Serve as the subject matter expert for all network-related technologies, providing technical leadership and guidance to engineering and operations teams.
• Evaluate, recommend, and integrate new technologies such as Software-Defined Networking (SDN) and Software-Defined Wide Area Networking (SD-WAN) to improve network agility and efficiency.
• Design and implement robust network security solutions, including the configuration of firewalls, intrusion detection/prevention systems (IDS/IPS), and other security fabric components.
• Manage network segmentation and isolation strategies to protect sensitive data and critical systems, ensuring compliance with security standards.
• Design and manage network load-balancing solutions to ensure high availability, optimal performance, and efficient traffic distribution across the network.
• Oversee the implementation of routing and switching protocols (e.g., OSPF, BGP) to ensure network stability, performance, and scalability across multi-site and global environments.
• Ensure the design of secure interconnectivity between on-premise infrastructure, cloud services (e.g., AWS, Azure), and remote access points.
• Develop comprehensive network documentation, including diagrams, topologies, and implementation plans, and provide ongoing support and troubleshooting for complex network issues.
• Collaborate with cross-functional teams, including cybersecurity, cloud engineering, and application development, to align network architecture with business goals and security requirements.
• Stay current on emerging networking and security trends, technologies, and best practices to drive continuous improvement and innovation.

Required skills and qualifications

• Bachelor’s degree in computer science, Information Technology, or a related field.
• 10+ years of progressive experience in network engineering, with at least 5 years in a network architect role designing enterprise-level networks.
• Expert-level knowledge and hands-on experience with routing and switching protocols and configuration (e.g., Cisco, Juniper).
• Extensive experience with network security technologies, including firewalls (e.g., Palo Alto, Check Point), IDS/IPS, and VPNs.
• Proven experience in architecting and implementing secure solutions for on-premise and cloud (IaaS/PaaS) environments.
• Strong knowledge of Software-Defined Networking (SDN) principles and practical experience with SDN technologies.
• Expertise in designing and managing load-balancing systems for high-traffic applications.
• Experience with network modeling, capacity planning, and performance analysis.
• Excellent analytical, problem-solving, and communication skills.
• Relevant industry certifications (e.g., CCNP, CCIE, AWS Certified Advanced Networking, Azure Network Engineer Associate) are highly desirable.

Job description:

Harper Brothers Construction is a full-service civil construction company specializing in large site infrastructure, underground, and road work. We are currently looking for a Project Engineer to join our team . The Project Engineer assists the Project Manager with the planning and daily execution of the construction project. Responsible for maintaining certain aspects of the project schedule, as assigned by the Project Manager, by managing the process of submittal approvals, coordinating the timely delivery of materials, and maintaining schedules and budgets to ensure projects are completed with quality, profitability and while complying with our Safety culture.

Responsibilities:

• Able to travel 60-70% of the time (Within Colorado)
• Assist in development of project plan as requested
• Read and understand plans and specifications
• Perform quantity takeoffs
• Perform solicitations to Vendors and Subcontractors
• Work on project site to observe progression
• Communicate roll out of projects with Project Manager, Superintendent, and field personnel
• Perform submittals to agencies as required for construction of project
• Review and analyze job cost information – verify accurate and complete, address and or correct as necessary
• Communicate with Project Manager and Superintendent on a regular basis to ensure project issues and concerns are addressed
• Generate billing quantities from information provided by field personnel and contractual requirements
• Able to work and assist others to work in a safe manner within the guidelines of the company’s policies
• Perform other duties as assigned

Qualifications & Skills Required:

• BS Degree in Construction Management, Civil Engineering, Construction Engineering, or related field of study
• Good Communication skills and ability to work well with others in a Team environment

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Brass Smith Innovations (BSI), part of Food Service Holdings, is looking for a detail-driven Estimator who enjoys turning drawings and specifications into accurate, competitive project quotes. This role sits at the intersection of sales, engineering, and project management, helping bring custom foodservice fabrication projects from concept to reality.

If you thrive in a fast-paced environment, enjoy solving problems, and want to play a critical role in winning new business, we want to hear from you.

What You’ll Do

As an Estimator, you will translate design drawings and specifications into accurate project quotes that support our sales and project management teams.

Key responsibilities include:

Project Estimating

• Analyze drawings, elevations, specifications, and equipment schedules to develop accurate project estimates.
• Prepare quotes using estimating software and Salesforce CRM.
• Generate complete project pricing within 1–3 days of receiving required information.
• Revise estimates as project specifications or contract documents change.

Client & Internal Collaboration

• Communicate with customers to gather required project details and clarify scope.
• Partner with sales representatives and project managers to refine pricing strategies.
• Present quote revisions and pricing updates to internal teams and clients.

Quote Management

• Track outstanding quotes and follow up with customers regarding status.
• Maintain accurate client and project information within Salesforce.
• Ensure all quotes align with contract documents and company standards.

Problem Solving

• Interpret complex design requests and work with internal resources to develop solutions.
• Manage multiple quotes and priorities simultaneously with minimal supervision.

What We’re Looking For

Required Qualifications

• High school diploma or GED
• 2+ years of experience in estimating, construction, manufacturing, or a related industry
• Strong math, analytical, and problem-solving skills
• Excellent communication and customer service abilities

Preferred Skills

• Experience reading construction drawings or shop drawings
• Proficiency with Microsoft Excel and Office tools
• Experience with Bluebeam, Salesforce, or estimating software
• Ability to work in a fast-paced, deadline-driven environment

What Makes Someone Successful in This Role

The best estimators at BSI are:

• Detail-oriented – you catch the small things that make the difference in project cost.
• Customer-focused – you understand client needs and respond quickly.
• Collaborative – you work closely with sales and project management to win projects.
• Self-driven – you manage priorities and deadlines independently.

Why Join BSI?

At BSI, we design and fabricate custom foodservice equipment and architectural casework used in projects across the country. Our team combines craftsmanship, engineering expertise, and innovative design to deliver solutions for some of the most demanding foodservice environments.

Ready to Apply?

If you enjoy working with drawings, numbers, and real-world projects—and want to be part of a growing manufacturing and fabrication company—we’d love to meet you.

Apply today to join the Brass Smith Innovations team.

Global Product Line Manager

We are seeking a high-impact Global Product Line Manager to steer the next chapter of growth within the Hydraulic Hose market segment. This position will lead and own the global strategy for hydraulic hose product lines including defining roadmaps, setting priorities, and leading initiatives that drive profitable growth for the organization long-term.

Location: Denver, CO

Compensation: $130,000 - $150,000 base salary + 10%-15% bonus + Medical, Dental, Vision, Life, STD, LTD, 401k match, PTO.

Job Description:

• Strategy & Roadmap: Define and manage the global product strategy and lifecycle for engine hose solutions, including alternative energy technologies.
• NPD & NPI: Lead the New Product Development and Introduction process, ensuring quality, cost, and schedule targets are met.
• Market Intelligence: Capture Voice-of-Customer (VOC), monitor industry trends, and analyze the competitive landscape to inform product requirements.
• Commercial Execution: Support sales and analytics teams to drive the pipeline, prepare market launch materials, and champion the product line to key customers.
• Financial & Ops Planning: Translate long-range financial forecasts into actionable product plans; manage global capacity, sourcing strategies, and capital investment needs.
• Global Coordination: Align with Regional Product Managers to ensure consistent supply chain, promotion, and manufacturing footprints across all territories.
• Leadership: Strong interpersonal skills with the ability to influence cross-functional teams and build global partnerships.
• Business Acumen: A blend of technical expertise and commercial "savviness" with a strategic, intuitive mindset.
• Agility: Ability to adapt to and lead organizational change in a fast-paced environment.
• Experience: Global work experience and a deep understanding of the automotive/heavy-duty markets preferred.

Search Associate

We are seeking a high-motor, intellectually curious Search Associate to join High Country Search Group. This is a foundational, "force-multiplier" role where you will support three of our most dynamic and high-stakes practice areas: Private Equity, Corporate Affairs, and Engineering & Construction. You will act as a strategic partner to our leadership, serving as research and business development support.

Core Responsibilities: The "Phone-First" Professional

While this role offers a masterclass in professional and executive search, it requires a "street smart" professional who can quickly discern criteria for success, has high recall, and excellent follow-through.

• Direct Source Recruiting & Candidate Identification: You will be responsible for candidate identification and development. This includes developing target lists using the phone and online resources to identify and penetrate high-value talent pools.
• Top-of-Funnel Execution: You must be a "phone-first" professional, comfortable making calls when needed. This involves assertively navigating organizational structures to conduct preliminary recruitment screens for high-level roles.
• Market Intelligence & Analytics: You will help produce data-driven reports and compelling pitch decks tailored to specific RFPs. You will proactively identify and track industry trends to provide market data and analytics to our team.
• Search Strategy & Business Development: Actively participate in designing search and business development strategies with leadership, from initial pitch to final candidate placement.
• Database Management: Consistently input and update candidate records and proprietary databases, ensuring all research outcomes are meticulously recorded.

Who You Are

• Educated & Highly Ambitious: You hold an undergraduate degree from a well-regarded institution and have a desire to apply academic rigor to a fast-paced environment.
• Communication Powerhouse: Outstanding telephone skills are essential. You must demonstrate excellent verbal and written communication skills when drafting reports, executive summaries, or specifications.
• Grit & Resilience: You are "hungry" for experience and possess the resilience required to thrive in a high-rejection, high-reward, and often unstructured sales environment.
• Intellectually Curious: You have the ability to quickly learn industry and functional fundamentals and understand the criteria for success in complex organizations.
• Discretion & Poise: You will interface with senior executives and must protect the confidentiality of client and candidate information at all times.
• Money Motivated: You want a career path where hard and smart work result in higher earnings.

The Career Path: Choose Your Own Adventure

We do not believe in a one-size-fits-all career track. This role is a launchpad that, depending on performance, can evolve into:

• Executive Recruiter: Take full ownership of the search process and manage high-level placements.
• Business Development Lead: Focus exclusively on high-level territory expansion and client acquisition strategy.

Market Intelligence Manager: Lead the firm’s data strategy, industry tracking, and knowledge systems.

Position: Specialized Product Manager III

Location: Denver, CO

Bill Rate: 70/ hr

– ongoing contract through the end of the year

Key Responsibilities

• Own and manage the full product lifecycle for Cisco-based managed network services, including:
• Continued development of existing products
• Introduction of new offerings
• Sunsetting of legacy solutions
• Drive development and roadmap execution for:
• Routing, switching, and managed Wi-Fi (Meraki and Cisco platforms)
• Enterprise cameras and IoT sensors
• Emerging solutions such as Cisco AI for Networking and AI-driven operationalization
• Serve as the product lead within the Managed Services group, acting as an “extra set of hands” to accelerate execution and delivery
• Translate end-user experience needs into clear product requirements and priorities
• Partner closely with engineering, architecture, operations, security, sales engineering, and go-to-market teams
• Ensure products are secure, scalable, and operationally efficient
• Develop and maintain product documentation, business cases, status reports, budgets, and presentations
• Manage scope, schedule, cost, and quality while driving milestones and ensuring effective change management
• Establish and execute communication plans with stakeholders at multiple levels of the organization

Required Skills & Experience

• 5 -7years of experience in Product Management, Product Development, or a closely related role with specialized technical skills
• Strong background in data networking (not voice)
• Deep understanding of enterprise networking from an end-user and CPE perspective
• Experience working in or with a service provider / managed services environment
• Solid business acumen with the ability to balance technical decisions with commercial impact
• Comfort working with Cisco networking portfolios (including Meraki)
• Strong understanding of security considerations in managed network services
• Excellent communication, leadership, decision-making, and problem-solving skills
• Proficiency with MS PowerPoint, Visio, Excel, and Word

Nice-to-Have / Highly Valued Experience

• Background as a Sales Engineer or similar customer-facing technical role (product knowledge can be taught)
• Familiarity with one or more of the following solution areas:
• Enterprise camera solutions
• IoT sensors and IoT management platforms
• Asset tracking and location services
• Indoor navigation and AI-driven mapping
• Occupancy analytics and environmental monitoring
• Smart buildings, sustainable meeting rooms, and building-management systems
• Smart logistics and AI-powered insights
• Behavioral metrics and personalized user experiences

Role - Lead Data Analyst

Location : Denver, CO [Local Only] In-person client interview

Job Summary

This role is responsible for extracting meaningful information and providing the business with actionable recommendations to drive outcomes. Responsible for leveraging existing data sources and creating new analysis methods.

Major Duties And Responsibilities

• Actively and consistently supports all efforts to simplify and enhance the customer experience.
• Lead client teams to define clear business requirements for data analysis projects.
• Provide metrics definition, data visualizations, and ETL requirements.
• Extract, clean and engineer data to be ready for analysis.
• Interpret data, formulate hypotheses and develop an analytical approach to meet business requirements
• Create customer-readable reports using advanced visualization tools such as Tableau, PowerBI, Excel, etc.
• Work to obtain and ingest new reference data sources required to deliver on business need.
• Communicate results and make recommendations using data visualization and presentations.
• Create analyses and dashboards that are usable, elegant and industry leading.

Required Qualifications

• Ability to read, write, speak and understand English
• Demonstrated in-depth ability to analyze, interpret and present data
• Demonstrated in-depth ability to make decisions and solve problems while working under pressure
• Demonstrated in-depth ability to prioritize and organize effectively
• Demonstrated mastery of advanced analytics processes and reporting design principles
• Demonstrated mastery in SQL, Python, or R
• Demonstrated in-depth proficiency of design and implementation practices within data visualization tools
• Effective communication skills, verbal and written, for internal and external customers
• Ability to communicate complex technical concepts to all levels of an organization to aid in decision-making

Required Education

• Bachelor's degree in Computer Science, Engineering or related field; or equivalent experience

Required Related Work Experience and Number of Years

• 7+ years’ experience working within a data platform/data analysis environment
• 7+ years’ experience in a customer facing products/services environment
• Technical Lead, exp in more industries, more expert than Data Insight Analysts

Senior Project Manager – Mission Critical

Role Overview

• Senior Project Manager responsible for leading large-scale industrial and mission-critical construction projects.

• Accountable for project performance, profitability, schedule adherence, and client satisfaction across complex builds.

• Projects typically involve electrical infrastructure, systems integration, and manufacturing or industrial environments.

Target Project Experience

• Experience managing projects with $30M–$50M+ total project scope

• 7+ years of experience in industrial, manufacturing, or mission-critical environments (such as data centers, electrical infrastructure, modular builds, or similar complex facilities)

• Familiarity with electrical scope and systems integration

• Experience coordinating cross-functional teams including engineering, field operations, subcontractors, and client stakeholders

Key Success Indicators

Strong candidates should be able to demonstrate experience with:

• Driving cost savings on projects

o Improving efficiencies, reducing waste, or optimizing project scope

• Improving gross margin or project profitability

o Ability to explain how decisions impacted financial performance

• Managing large and complex project scopes

o Leading detailed schedules, subcontractor coordination, and technical delivery

• Client and stakeholder communication

o Navigating complex customer conversations while maintaining strong relationships

Work Location & Schedule

• Location: Aurora, Colorado

• Schedule: Full-time, on-site

• Role requires daily on-site presence to support field coordination, project teams, and operational execution

Compensation

• Base Salary: $125,000 – $165,000 (depending on experience)

• Bonus eligibility

Lightwave Logic: (Nasdaq: LWLG) is a publicly traded materials and device development company that is conducting cutting-edge work to commercialize its proprietary organic nonlinear polymers for a variety of electro-optic devices and pushing the state of the art in high-speed fiber-optic telecom and data communications. Our development roadmap is geared to disrupt the industry by introducing organic modulators and related photonic integrated circuits that have superior speed, lower power consumption, and smaller size than current technologies. Our materials and devices are extendable into other applications, including sensors and instrumentation.

Job Description

We are seeking a Process Chemist to join our team in Englewood, CO. The Process Chemist designs, develops, optimizes, and scales chemical processes for the pilot to large-scale manufacturing of intermediate and finished products. The Process Chemist leverages their expertise in ensuring that chemical processes are developed so that the chemical reaction(s) is carried out efficiently, safely, and economically, and are within quality and regulatory compliance. By staying current with scientific literature and collaborating across teams, they drive innovation and efficiency. This role involves supporting IP development, maintaining safety standards, and contributing significantly to the team's success in achieving company goals.

Responsibilities

• Designing, developing, and optimizing chemical processes to improve efficiency, yield, and product quality.
• Conducts laboratory experiments to understand chemical reactions and improve process conditions.
• Ensure that chemical processes comply with regulatory requirements and safety standards.
• Conduct small, pilot, or large-scale manufacturing of intermediates and/or finished products.
• Write/execute technical reports, standard operating procedures, and batch records.
• Ability to work second shift, when needed.
• Remain current on relevant scientific literature.
• Work collaboratively with colleagues across the company; use this collaboration to support the company's goals and improve the chemistry team's output.
• Punctually and thoroughly record all work and data in e-notebook, as well as summarize and report ongoing work to the group regularly.
• Exhibit safety awareness, safe work practices, and common laboratory hygiene, and ensure that all members of the chemistry team abide by the safety policies of the company.
• Other duties and projects as assigned.

Qualifications

• BS/MS in chemistry, chemical engineering, or a related discipline.
• 1-3 years’ experience with process development, process optimization, and/or scale-up.
• An understanding and/or familiarity with regulatory compliance in chemical manufacturing.
• Knowledgeable in chemical reaction mechanisms, kinetics, and environmental health and safety practices.
• Ability to use analytical instrumentation (HPLC, GC-MS, DSC, pH meter, etc).
• Ability to operate pilot to large-scale chemistry equipment (chemical reactors, pumps, distillation equipment, etc).
• Strong analytical and troubleshooting skills.
• Ability to conduct literature searches for specific target molecules and reactions; ability to use the literature to design efficient synthetic routes, as well as troubleshoot problematic reactions.
• Thorough understanding of modern analytical and spectroscopic techniques and ability to interpret the corresponding data and spectra.
• Quality-first mindset, which leads to the production of highly pure final products.
• Ability to work independently and efficiently, as well as work across and within groups to support the goals of the company.
• Ability to organize work efficiently, carry out multiple operations in parallel, and successfully complete projects in a timely fashion.
• Excellent written and oral communication skills.

Compensation

The salary range for this role is $75,000-$90,000.

Benefits

LightwaveLogic offers a highly competitive compensation package including stock options, as well as comprehensive benefits including fully paid medical, dental, and vision insurance coverage (employee and family). a generous PTO policy, $500/year(prorated) company contribution to your medical FSA, and a 401K (safeharbor, 4% match).

EEO Statement

Lightwave Logic is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Akkodis is seeking a ServiceNow - CMDB Configuration Manager for 12+ Months Contract position with our Direct Client located in Denver, CO.

Pay Range: $65 - $68/hr on W2; The rate may be negotiable based on experience, education, geographic location, and other factors.

Job Description:

Required Skills:

• ServiceNow CMDB Expertise: Demonstrated experience managing a ServiceNow CMDB, including Data Manager, Attestation, and CMDB Health.
• Integration Experience: Hands on experience with ServiceNow Integration Hub, data streams, ETL processes, and third party data sources.
• Asset & CI Alignment: Strong understanding of the relationship between asset records and their corresponding Configuration Items.

General Description of the Engagement

• CMDB Configuration Manager
• Role Overview, Responsibilities, and Requirements
• Position Summary
• DEN is seeking an experienced ServiceNow CMDB Configuration manager to help us on our
• journey to mature the CMDB data that drives our overall asset lifecycle management
• program. The CMDB Configuration Manager is responsible for overseeing the asset and CI
• lifecycle within the ServiceNow Configuration Management Database (CMDB). This role is
• accountable for ensuring that CMDB data is complete, correct, compliant, and
• service-aware, enabling reliable asset lifecycle management, impact analysis, reporting,
• and operational decision-making.
• The CMDB Configuration Manager continuously monitors CI data quality, working beyond
• automated controls to actively manage integration outputs, reconciliation, and stakeholder
• alignment. This role partners closely with Technology Asset Management (TAM),
• Procurement, and Operational teams to ensure assets are accurately represented
• throughout their lifecycle and aligned with organizational standards and regulatory
• requirements.

Key Responsibilities

• CMDB Data Quality & Health
• Monitor and report on the accuracy, integrity, and compliance of CI data within the ServiceNow CMDB.
• Monitor CMDB Health metrics (Completeness, Correctness and Compliance) and proactively remediate data quality issues.
• Lead regular audits and reconciliations of assets and CIs using ServiceNow CMDB Health, Data Manager, and Attestation tools.
• Investigate stale discovery or integration records to determine decommissioned or improperly retired assets.

Asset & CI Lifecycle Management

• Audit the end-to-end lifecycle of assets and their corresponding Configuration Items (CIs), from intake through retirement.
• Ensure continuous alignment and synchronization between Asset and CI records.
• Resolve mismatches in state, substate, ownership, and location between asset and CI records.
• Ensure proper retirement and disposal tracking is occurring, in alignment with governance and compliance requirements.
• Integration & Reconciliation Governance
• Oversee the technical health of CMDB data integrations leveraging ServiceNow Integration Hub.
• Monitor and troubleshoot ETL processes to ensure accurate ingestion of third party data sources.
• Assist with review and remediation of Identification and Reconciliation Engine (IRE) errors to resolve data conflicts and prevent duplicate CI creation.
• Partner with integration owners to enforce data standards and reconciliation rules.

CSDM & Relationship Governance

• Document and enforce hardware configuration standards aligned with the ServiceNow Common Service Data Model (CSDM).
• Where defined, ensure accurate asset to service relationships and dependency mappings for servers, network devices, and storage components.
• Perform spot checks and targeted reviews to validate CI relationships supporting reliable service impact analysis.

Stakeholder Collaboration

• Partner with Technology Asset Management (TAM), Procurement, Operations, and Facilities teams to align asset intake, refresh cycles, and lifecycle processes.
• Coordinate with stakeholders to ensure CMDB standards are followed during acquisitions, changes, and decommissioning activities.
• Serve as a subject?matter expert for CMDB data governance and best practices.
• Reporting, Enablement & Continuous Improvement
• Generate and distribute asset and CMDB reports to support operational, financial, and compliance decision?making.
• Train and guide IT staff and stakeholders on CMDB procedures, data quality expectations, and configuration management best practices.
• Stay current with industry trends, ServiceNow platform enhancements, and emerging configuration management practices.

Required Qualifications

• ServiceNow CMDB Expertise: Demonstrated experience managing a ServiceNow CMDB, including Data Manager, Attestation, and CMDB Health.
• Integration Experience: Hands?on experience with ServiceNow Integration Hub, data streams, ETL processes, and third-party data sources.
• Asset & CI Alignment: Strong understanding of the relationship between asset records and their corresponding Configuration Items.
• Framework Knowledge: Solid knowledge of ITIL v4 practices, particularly Service

Configuration Management and Asset Management.

Education: Bachelor's degree in information technology, Computer Science, Business

Administration, or related field, or equivalent professional experience.

Preferred Qualifications

• Certifications: ITIL v4 Foundation; ServiceNow Certified Implementation Specialist (CIS) in Hardware Asset Management (HAM) or Discovery.
• Advanced Platform Knowledge: Experience with ServiceNow HAM Professional and advanced CSDM implementations.
• Scale: Proven experience managing large?scale hardware environments with 10,000+ Configuration Items.
• Analytics: Proficiency with ServiceNow Performance Analytics, Power BI, or advanced Excel for reporting and analysis.
• Compliance: Familiarity with regulatory and compliance frameworks such as SOX, HIPAA, or NIST as they relate to asset and configuration management

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, please contact Ayush Garg at 61 or

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits, and a 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State, or local law; and Holiday pay upon meeting eligibility criteria. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs which are direct hire to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records.

• 
  
• Develop and implement quality control plans and procedures for construction projects.
  

• 
  
• Conduct regular inspections and audits to ensure compliance with quality standards and specifications.
  

• 
  
• Lead and manage quality control by providing guidance and support to ensure effective quality assurance activities.
  

• 
  
• Collaborate with project managers and stakeholders to identify quality issues and implement corrective actions.
  

• 
  
• Prepare and maintain quality documentation, including reports, records, and compliance certifications.
  

• 
  
• Train and mentor team members and other staff on quality control practices and procedures.
  

• 
  
• Stay updated on industry standards, regulations, and best practices related to quality management in construction.
  

• 
  
• Ensuring EM385 and other relevant regulatory or compliance requirements are met.
  

• 
  
• Promoting and maintaining a culture of safety throughout the worksite.
  

• 
  
• Work closely with subcontractors by reviewing high risk activity of work scopes and providing support to ensure teams are informed about safety protocols/procedures specific to project.
  

• 
  
• Verifying all workers are oriented, have proof of training for scope of work, and ensures team members are well-informed about safety protocols and procedures specific to the project.
  

• 
  
• Actively participate in regular Environmental, Health, and Safety inspections, identifying potential hazards/compliance issues and promptly addressing them to mitigate risks.
  

• 
  
• Leads the safety committee, collaborating with other team members to develop and implement effective safety measures.
  

• 
  
• Conducting investigations, gathering relevant data - propose time-bound action items.
  

• 
  
• Maintain and update all safety-related paperwork including hazardous materials, inspections, pre-task plans, and permits.
  

• 
  
• Maintain, update, and practice Emergency Action Plan and call trees to ensure efficiency.
  

• 
  
• Monitor and report on safety performance metrics, identifying trends and areas for improvement.
  

• 
  
• Monitor site general conditions and plan with site team to ensure risks related to items such as walk paths, lighting, access, weather are accounted for.
  

• 
  
• Stay updated on industry standards, regulations, and best practices related to EHS management in construction or related field preferred
  

• 
  
• 10+ years of relevant construction experience (3+ years of QC management)
  

• 
  
• Active CQM cert
  

• 
  
• Well-versed in 3 phases of quality control.
  

• 
  
• Proven experience as a QC Manager on multiple DOD projects exceeding $10M
  

• 
  
• Strong leadership and team management skills.
  

• 
  
• Excellent communication and interpersonal skills.
  

• 
  
• Detail-oriented with strong analytical and problem-solving abilities.
  

• 
  
• Willingness to travel to job site locations at all 5 bases on the island.
  

• 
  
• Must have prior experience with design-build projects and project delivery for serious consideration.
  

• 
  
• Minimum of 5 years of progressive experience with construction safety management.
  

• 
  
• Data center construction experience strongly preferred.
  

• 
  
• SSHO and Construction military project experience is required.
  

• 
  
• 1 to 3 years supervisory experience preferred
  

• 
  
• Working knowledge of U.S Occupational Safety and Health Administration (OSHA) and EM385 regulations and standards and other non-regulatory safety standards applicable to the location.
  

• 
  
• Knowledgeable with NFPA 70E and environmental compliance.
  

• 
  
• Experience conducting incident investigations and reporting processes. Communicate effectively with client safety team regarding incidents and other action items.
  

• 
  
• Experience writing and reviewing JHAs, SOPs, EOPs, MOPS, Hazcom, technical reports and procedures.
  

• 
  
• Excellent written and oral communication skills.
  

• 
  
• Outstanding Customer relations skills.
  

• 
  
• This role and customer contracts require proof of US Citizenship. Ability to obtain security clearance is preferred.
  

• 
  
• Bachelor's degree in: Construction Management, Engineering, Environmental Health and Safety (EHS), Construction Management
  

• 
  
• Knowledge with experience using Microsoft Office
  

• 
  
• BCSP certifications preferred (CSP, CHST, SMS)
  

• 
  
• No supervisory responsibilities for this position.
  

Lightwave Logic: (Nasdaq: LWLG) is a publicly traded materials and device development company that is conducting cutting-edge work to commercialize its proprietary organic nonlinear polymers for a variety of electro-optic devices and pushing the state of the art in high-speed fiber-optic telecom and data communications. Our development roadmap is geared to disrupt the industry by introducing organic modulators and related photonic integrated circuits that have superior speed, lower power consumption, and smaller size than current technologies. Our materials and devices are extendable into other applications, including sensors and instrumentation.

Overview

The Fabrication Process Engineer is essential in the development, optimization, and implementation of processes for fabricating nanoscale electro-optic devices using techniques like physical vapor deposition, electro-optic polymer coating, atomic layer deposition (ALD), photolithography, and reactive ion etching within a cleanroom environment. This role involves formulating polymer solutions, performing precise photolithography, characterizing nanostructures, and maintaining advanced fabrication tools. The engineer will collaborate with cross-functional teams to enhance processes while ensuring adherence to safety and cleanroom protocols, making significant contributions to the advancement of electro-optic technology.

Responsibilities

• Formulate the electro-optic polymer solutions and spin coat it on devices followed by a baking procedure.
• Perform photolithography to pattern hard masks including metals, dielectrics, semiconductors and polymer films for etching.
• Characterize etched nanostructure and devices, measure dimensions and roughness and interpret the results obtained by scanning electron microscope (SEM), atomic force microscopy (AFM), focused ion beam (FIB) etching and SEM, (FIB-SEM), spectroscopic ellipsometry (SE), stylus and 3D optical profilers and optical microscopes.
• Operate, maintain and troubleshoot fabrication tools such as maskless aligner (MLA), inductively coupled plasma – reactive ion etching (ICP-RIE) systems.
• Develop etching processes on bare silicon, thermal and CVD oxides for nanostructure fabrication.
• Optimize etching parameters by design of experiment (DOE) to improve the selectivity, uniformity and etched surface roughness of etching process.
• Deposit metals, dielectrics, and semiconductors by E-beam evaporator and plasma sputtering.
• Develop and optimize atomic layer deposition (ALD) techniques for dielectrics (such as metal oxides) and conductive materials.
• Document work in detail and keep process travelers updated.
• Work collaboratively with team members and leaders in all areas of the company.
• Exhibit safety awareness, safe work practices, laboratory hygiene and cleanroom protocol compliance.
• Other duties or projects as assigned.

Qualifications

• Bachelor’s degree (minimum) or Master’s degree (preferred) in chemical engineering, electrical engineering, material science, applied science, or a related discipline.
• Prior experience operating a variety of laboratory and clean room tools and instrumentation, including spin coaters, PVD deposition tools, ALD deposition tools, mask aligners, advanced maskless aligner (MLA) tools, reactive ion etchers, and wet bench photoresist development.
• A strong understanding of the fundamentals of semiconductor fabrication processes, with a focus on etch, deposition, and lithography (e-beam and DUV) processes
• Hands-on experience in the operation, maintenance, and troubleshooting of inductively coupled plasma – reactive ion etching (ICP-RIE) systems, as well as optimization of atomic layer deposition (ALD) techniques for dielectrics (such as metal oxides) and conductive materials.
• Excellent written and oral communication skills.

Preferred Qualifications

• Silicon Photonics design, manufacture, test, Electro-optic device test, and Electro-optic polymer experience.
• experience in the fabrication of semiconductors or photonic devices in cleanroom. Optical device fabrication background a plus.
• High Volume Manufacturing experience and experience in process development to HVM transfer.
• Thin film characterization experience a plus (e.g., microscopes, profilometers, SEM, AFM, etc.).

Compensation

The salary range for this role is $95,000- $115,000

Benefits

LightwaveLogic offers a highly competitive compensation package including stock options, as well as comprehensive benefits including fully paid medical, dental, and vision insurance coverage (employee and family). a generous PTO policy, $500/year(prorated) company contribution to your medical FSA, and a 401K (safeharbor, 4% match).

EEO Statement

Lightwave Logic is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description

King Soopers Bakery Manufacturing

Lead the effective execution of all plant maintenance and assigned projects, in support of safety, quality and continuous improvement. Perform all jobs safely, efficiently and accurately to maintain and improve the performance of the entire plant in the areas of Safety, Quality, Reliability (SQR) and our Customer 1st strategy. Provide leadership that embodies our 7 Kroger Manufacturing High Performance Work System principles. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety.

Responsibilities

• Ensure a safe, efficient and effective use of all supervised craft resources
• Supervise and coach direct reports in the performance of their duties; complete performance reviews and provide feedback to direct reports
• Ensure compliance to Occupational Safety and Health Administration (OSHA), Environmental Protection Agency (EPA), Department of Health and Environmental Control (DHEC), National Electrical Code (NEC), and Food and Drug Administration (FDA) regulations
• Direct mechanics in the performance of approved maintenance work including quality control, duration, cost and thoroughness
• Assign and inspect all planned preventative maintenance (PPM) work orders
• Review available planned job packages for completeness and correctness; refine and finalize labor, materials, parts, methods and priorities
• Identify, arrange and track the skills training and development needs of each team member; ensure prompt assignment of mechanics to specific jobs relative to individual abilities
• Ensure that good housekeeping and safe work practices are followed throughout the facility
• Clean shop areas daily, including spare parts room and offices
• Provide support and leadership in troubleshooting equipment
• Ensure all labor, parts and work are reported daily through the Computerized Maintenance Management System (CMMS)
• Follow established programs, policies and practices to produce safe, quality foods that meet regulatory and company requirements
• Accountable to the Kroger Manufacturing Food Safety and Quality Principles
• Must be able to perform the essential job functions of this position with or without reasonable accommodation
• Must be able to work around ingredients and/or finished products known to contain food allergens

Minimum Qualifications

• Bachelor's Degree a related field or 5 years of progressive experience in maintenance supervision
• Experience in the food industry dealing with preventative/predictive maintenance process, technical guidance and development of the maintenance work force
• Functional knowledge and use of Microsoft Office and CMMS
• Proven leadership skills
• Excellent communication skills
• Strong analytical ability
• Knowledge of Food Safety Principles, Good Manufacturing Practices (GMP), and EPA and OSHA requirements

Desired Qualifications

• Other Bachelor's degree in mechanical, electrical or chemical engineering
• Experience in continuous improvement activities
• Plant maintenance supervisor

About the job

Air Quality Director

We are seeking a dynamic leader to expand our Air Quality program. This role involves leading the growth and development of our Air Quality program, cultivating client relationships, identifying new business opportunities, providing technical expertise and oversight, while being an effective people leader and fostering our culture of continuous improvement, personal growth, and accountability, in line with the “Quandary Way.” The ideal candidate will have a blend of leadership skills, solid financial and business acumen, technical expertise in air quality, with a desire to work in an exciting and dynamic work environment.

Supervisory Responsibilities:

• Responsible for leading all team members within the Air Quality Program
• Responsible for ensuring direct reports are leading those that they manage effectively and in line with our policies and procedures
• Responsible for continuously evaluating resource needs and collaborating with HR to hire technical or management team members when necessary to foster growth
• Responsible for delegating work, ensuring efficient workflow to the appropriate team members to both their direct reports and all those in the program
• Responsible for mentoring and training direct reports and all those who are in the program when necessary
• Responsible for timely performance reviews for direct reports ensuring they are doing the same for theirs per Quandary’s policies and procedures

Leadership Duties and Responsibilities:

• Lead the Air Quality Program, including our permitting and compliance group and air monitoring program, overseeing day-to-day operations and strategic direction
• Develop and execute a multi-year strategic growth plan for the Air Quality program to alight with our objectives. Ensure the financial viability of strategic growth decisions with assistance and oversight from the Sr. Operations Director, Finance Director, and Owners
• Accountable for utilization, billing rates, revenue growth, and gross margins
• Evaluate, improve, and implement/update internal program tools, processes, procedures, for effective and efficient project execution
• Develop and maintain client relationships, understanding their unique needs to propose creative consulting solutions
• Actively develop new business opportunities outside of current clientele and assist us overall by cross selling our other services to existing and potential clients
• Proactively seek out and participate in trade and professional associations to support networking and business development
• Stay current with industry trends
• Ensure project timelines and deployments are effectively managed and maintained
• Demonstrate commitment to safety and environmental compliance in all job aspects
• Monitor federal, state, and local air quality regulations and rulemakings

Required Skills/Abilities:

• Strong leadership presence with leadership philosophies in line with our Mission Statement
• Experience scaling and leading through growth
• Professional demeanor with excellent written and verbal communication skills
• Ability to teach, mentor, support, and provide clear expectations to direct reports
• Efficient and effective at determining creative solutions to problems
• Desire to continue to learn and grow with the company, holding yourself accountable
• Team player; easy to work with, receptive to feedback, and open to constructive criticism from both company leadership and those you are leading in the program while putting the needs of the program above your own
• Ability to manage multiple priorities and work in a fast-paced and challenging environment
• Proficiency with Microsoft Suite
• Valid driver’s license and proven safe driving record

Education and Experience:

• Bachelor’s degree in environmental science, environmental or chemical engineering, or related field
• 15+ years of experience in technical air quality consulting, regulatory, or private industry
• 5+ years of effective leadership and managerial experience, leading and mentoring a team of direct reports, preferably with multiple layers of management
• 10+ years of proven experience effectively managing projects, meeting budgets, and being the main point of communication for client contact
• Experience interpreting complex state and federal regulations to determine applicability to varying client facilities and scenarios
• Familiarity with oil and gas equipment, operational practices, field environment, technical and engineering terms related to these practices
• Advanced degree, leadership accreditations or course completions, and strategic planning experience a plus.

JOB SUMMARY

This role is responsible for extracting meaningful information and providing the business with actionable recommendations to drive outcomes. Responsible for leveraging existing data sources and creating new analysis methods.

MAJOR DUTIES AND RESPONSIBILITIES

Actively and consistently supports all efforts to simplify and enhance the customer experience.

Lead client teams to define clear business requirements for data analysis projects.

Provide metrics definition, data visualizations, and ETL requirements.

Extract, clean and engineer data to be ready for analysis.

Interpret data, formulate hypotheses and develop an analytical approach to meet business requirements

Create customer-readable reports using advanced visualization tools such as Tableau, PowerBI, Excel, etc.

Work to obtain and ingest new reference data sources required to deliver on business need.

Communicate results and make recommendations using data visualization and presentations.

Create analyses and dashboards that are usable, elegant and industry leading.

REQUIRED QUALIFICATIONS

Required Skills/Abilities and Knowledge

Ability to read, write, speak and understand English

Demonstrated in-depth ability to analyze, interpret and present data

Demonstrated in-depth ability to make decisions and solve problems while working under pressure

Demonstrated in-depth ability to prioritize and organize effectively

Demonstrated mastery of advanced analytics processes and reporting design principles

Demonstrated mastery in SQL, Python, or R

Demonstrated in-depth proficiency of design and implementation practices within data visualization tools

Effective communication skills, verbal and written, for internal and external customers

Ability to communicate complex technical concepts to all levels of an organization to aid in decision-making

Required Education

Bachelor's degree in Computer Science, Engineering or related field; or equivalent experience

Required Related Work Experience and Number of Years

10+ years’ experience working within a data platform/data analysis environment

10+ years’ experience in a customer facing products/services environment

Within our Corporate Supply Chain and Procurement team located in Denver – Leprino is seeking a P2P (Purchase-to-Pay) Analyst to help centralize and strengthen how indirect procurement purchase orders are created and managed across the business. This role starts hands-on, supporting day-to-day PO execution, and grows into shaping a clearer, more consistent purchasing approach for our plants. You’ll partner closely with Procurement, IT, and plant teams to bring structure where today there is variation, while helping the organization move forward with confidence.

At Leprino, starting compensation for this role typically ranges between $73,000 and $81,000. This position has an annual target bonus of 5%.

What You’ll Do:

• Create and manage purchase orders and change orders for indirect spend using SAP S/4HANA.
• Serve as the primary point of coordination for indirect PO intake, clarifying requests and routing work efficiently.
• Build a centralized approach to indirect PO creation that reduces duplication and confusion.
• Partner with IT to define purchasing workflows that are practical, scalable, and easy to adopt.
• Document purchasing processes and prepare clear guidance for plant teams.
• Roll out standardized PO practices to plants, supporting training and early adoption.
• Monitor purchasing activity to ensure alignment with approved processes and documentation standards.
• Support resolution of PO, invoice, and payment issues in partnership with Accounts Payable.
• Maintain accurate purchasing data, including pricing, vendors, and contracts within SAP.
• Provide visibility into purchasing activity to procurement leaders as processes mature.
• Track indirect PO activity and cycle times to identify gaps, delays, and rework in the process.
• Support audits and internal reviews by maintaining clear documentation for purchasing transactions and approvals.

You Have At Least (Required Qualifications):

• Bachelor’s degree in Business, Finance, Supply Chain, Operations, Engineering, or a closely related field.
• 3 or more years of experience in procurement operations, purchasing, or purchase-to-pay execution.
• Hands-on experience using SAP S/4HANA tools that support indirect purchasing and purchase-to-pay execution (e.g., PO creation, change orders, pricing updates, invoice issue resolution).
• Direct experience performing transactional purchasing work, not system configuration or technical SAP development.

We Hope You Also Have (Preferred Qualifications):

• Master’s degree in Business, Supply Chain, Operations, or a related discipline.
• Experience helping design or roll out standardized purchasing processes across multiple sites or teams.
• Experience partnering with IT on process definition, testing, or system-enabled improvements.
• Exposure to centralized purchasing models or indirect spend management in a manufacturing environment.

At Leprino, we believe in equal employment opportunity and make employment decisions based on each individual’s unique talents, experience, skills, and knowledge; we do not discriminate on the basis of any personal characteristics. We know we are better together and are committed to creating an inclusive and supportive culture in which all employees can thrive.

Offering You In Return:

A chance to be part of a global team of individuals passionate about producing and delivering high-quality products that help feed and nourish families around the world. Leprino could not be where it is today without our incredible employees. That is why we share in our success together by rewarding you for your hard work. Hiring great people who are in it for the long run is our goal. Through competitive salaries and bonuses, life, medical/dental/vision coverage, voluntary benefits, employee assistance programs, wellness incentives, tuition assistance, vacation, ten paid holidays, sick time, paid parental leave, annual merit increases, as well as the LFC Profit-Sharing & 401(k) plan. Your impact will be noticed and rewarded, as you seek to further our company, our customers, and one another.

Our Story:

Leprino’s history dates back to the 1950s, when Jim Leprino first started making small batches of mozzarella for local markets and eateries in the Little Italy neighborhood of Denver. We’ve grown a bit since then. Today, Leprino is the world’s largest manufacturer of mozzarella and lactose, and a leading producer of whey protein. Still owned by the Leprino family, our sights are set to be the “World’s Best Dairy Food and Ingredient Company.” From a small corner grocery store we have grown to over 5,500 employees throughout the globe. Will you join us on our journey?

While we review LinkedIn Easy Apply submissions and may reach out for an initial conversation, they are considered an inquiry rather than an official application. To be formally considered for this position, please apply directly at

Manufacturing Maintenance Technician II (3rd Shift)

Location: Littleton, CO 80129

Full-Time Role

Shift: 3rd Shift (Mon–Fri)

We’re hiring a Manufacturing Maintenance Technician II for one of our clients to support critical production operations and ensure equipment runs safely, efficiently, and reliably.

What You’ll Do

• Perform preventive and corrective maintenance on manual, semi‑automated, and fully automated equipment.
• Troubleshoot and repair mechanical, electrical, pneumatic, hydraulic, and controls/PLC systems.
• Diagnose problems, conduct root cause analysis, and implement permanent corrective actions.
• Support equipment upgrades, process validations, and continuous improvement projects.
• Reduce downtime, improve machine performance, and help drive key operational metrics.
• Collaborate with operations, engineering, and other teams to resolve issues quickly.
• Maintain safety compliance, cleanroom standards, and maintenance documentation.

What You Bring

• 2+ years of maintenance experience (5 years preferred).
• Strong skills with tools, test instruments, schematics, and technical drawings.
• Hands-on experience with:
• Electrical & mechanical systems
• PLC controls, logic, networks (Ethernet/DeviceNet)
• Pneumatics & hydraulics
• RF welding, ultrasonic welding, hot plate welding (preferred)
• Ability to work independently and troubleshoot complex issues with high accuracy.
• Effective communication, time management, and a proactive mindset.
• Willingness to pursue internal certifications (e.g., Electrical Safety, RF Welding).

Physical Requirements

• Ability to lift up to 50 lbs and move up to 500 lbs with carts/equipment.
• Comfortable working in a cleanroom environment.
• Ability to stand, walk, bend, and use fine motor skills throughout the shift.