Engineering Jobs in Dracut Massachusetts

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory.  The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.

What You Will Do

• Address major yield and technical issues highlighted by tech leads and factory operation managers.

• Perform data analysis and provide direction for overall product yield and performance improvement.

• Facilitate collaboration across manufacturing work centers and design engineering.

• Empower production test engineer to resolve complex failures through data driven troubleshooting technique.

• Establish technical understanding of the product architecture, subassemblies, and test requirement.

• Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.  

• Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.

Qualifications You Must Have  

• Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience

• 4+ years in Production testing/troubleshooting

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Preferred majors: Electrical Engineering, Computer Science/Engineering Technology

• The ability to interpret and analyzer RF parametric data

• Experience with lean principles in a manufacturing environment

• Current DOD Secret Security Clearance

• Excellent communication skills (written and verbal) and presentation skills

• Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations

• Experience applying technical principles in the manufacturing life cycle

• Experience with Quality Systems and their application

• Shop Floor Management

• Strong engineering aptitude and analytical skills

• Technical problem solving

• Customer and company oriented and driven to meet or exceed expectations

• Ability to work cohesively in a team environment

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.

The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.

You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.

What You Will Do

• Provide technical oversight and management for a variety of Systems Engineering efforts

• Concept and requirements development (including decomposition and flowdown) within a mature product-line

• Concept of Operations (CONOPS) development and design

• Algorithm optimization and development

• Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System

• Collaboration with customer to bring new capabilities to the warfighter

• Functional analysis of real world and test data; trade studies to bring advanced features to fielded system

• Support and lead Internal and External Program and Design Reviews

• Collaborate with other IPT/CPT leads from the various functions and products

• Support and lead Internal Research and Development for future capability upgrades

• System integration and test support, including live fire test events

• Periods of travel up to 25% of time both domestically and internationally

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience

• Experience with Air Defense Systems in systems engineering roles supporting development or production

• Experience with managing budget, scope and/or earned value

Qualifications We Prefer

• Experience interfacing with external customers and industry partners

• Excellent communication skills, written and verbal, with a variety of audiences

• Self-motivated, passionate leader

• 5+ years of experience in Air Defense Systems, Systems Engineering production or development

• Existing DoD Security Clearance

• Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)

• Experience managing competing programmatic priorities

• Experience making challenging technical decisions

• Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent

• Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)

• Advanced degree in EE, CE, Physics, Math, ME, Aerospace\

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Are you a hands-on Quality leader who thrives in high-accountability environments and believes great culture drives great results? We’re looking for a Site Quality Manager to lead all Quality functions at our North Billerica facility and play a key role in shaping performance, compliance, and team development.

If you’re passionate about building strong teams, driving continuous improvement, and ensuring world-class quality standards — this is your opportunity to make a measurable impact.

As the Site Quality Manager, you will:

• Lead and continuously improve our AS9100 / ISO 9001 Quality Management System
• Oversee MRB, NCMRs, CAPAs, SCARs, RMAs, and root cause investigations
• Direct all inspection activities (In-Process, Pre-Mold, Final) including AS9102 First Article Inspections
• Ensure cable and harness assemblies meet IPC-620, J-STD-001, AS9102, and customer requirements
• Review and approve work order packages, C of Cs, and shipment documentation
• Monitor quality metrics, defect trends, and drive Zero Defect initiatives
• Lead internal audits and support customer and certification audits
• Partner cross-functionally with Production, Engineering, Planning, Procurement, and Corporate Quality
• Develop and mentor the Quality team, building capability and accountability at every level
• Serve as the primary customer liaison for quality-related matters

Technical Expertise:

• Strong working knowledge of AS9100 Rev D and ISO 9001
• Experience with AS9102 First Article Inspection
• Familiarity with IPC-620 and J-STD-001 (Space Addendum a plus)
• Deep experience with NCMR, MRB, CAPA/RCCA, and root cause analysis
• Aerospace or military manufacturing background preferred
• Ability to read and interpret engineering drawings, wire lists, and MIL specs
• Experience in build-to-print cable/harness manufacturing is a plus

Leadership & Impact:

• 5+ years in Quality Assurance/Quality Control within manufacturing
• Prior team leadership experience
• Proven track record leading corrective actions to closure
• Experience conducting internal audits under AS9100
• Strong analytical skills with the ability to turn data into actionable insights
• Clear, professional communication with customers and suppliers

This is a high-visibility leadership role in a fast-paced aerospace manufacturing environment where quality is mission-critical.

Role Overview

The Key Account Manager (KAM) is responsible for managing and expanding Pion’s most

strategic customer relationships within the Boston market. This role is central to the

company’s growth strategy and carries meaningful ownership over revenue performance,

account expansion and long-term customer value.

The KAM operates with a high degree of autonomy and accountability, working in a

performance-driven environment where accurate forecasting, structured account

planning, and disciplined execution are essential. This is not a transactional sales role - it

requires strategic thinking, scientific credibility and operational rigor.

Key Responsibilities

Strategic Account Management

 Own and execute comprehensive account plans aligned to company growth targets

 Build deep, multi-level relationships across R&D, Analytical, CMC and Procurement

 Understand customer workflows, strategic priorities, and long-term pipelines

 Position Pion as a long-term partner through value-based, consultative engagement

 Identify expansion opportunities tied to new applications, enhanced products and

evolving customer needs

Sales Execution & Growth

 Deliver against defined revenue and growth objectives for assigned territory

 Manage complex sales cycles involving capital equipment, consumables and

services

 Maintain disciplined pipeline management, opportunity qualification and

forecasting

 Ensure CRM accuracy and timely updates to support operational planning and

leadership visibility

 Set and manage customer expectations around manufacturing schedules, lead

times and delivery constraints

Operational Excellence & Rigor

 Operate with a high level of structure, accountability and follow-through

 Partner closely with Operations, Manufacturing, Applications, and Service to drive

predictable outcomes

 Proactively identify risks and constraints, escalating appropriately and early

 Contribute to continuous improvement of sales processes, tools, and cadence

Customer Advocacy & Internal Collaboration

 Serve as the primary commercial owner for assigned territory accounts

 Coordinate internal resources to ensure successful installations, adoption and

ongoing value realization

 Act as the voice of the customer, providing actionable feedback to Product and

Leadership teams

 Navigate escalations and competitive pressures with professionalism and clarity

Market & Competitive Insight

 Maintain strong awareness of regional market dynamics, competitors and emerging

technologies

 Represent Pion customer meetings, scientific forums and industry events

 Identify high-growth opportunities within pharma, biotech, CDMOs and academic

institutions in the Boston ecosystem

Qualifications & Experience

Required

 Advanced degree in Chemistry, Pharmaceutical Sciences, Engineering or a related

scientific discipline preferred

 5+ years of experience in life sciences sales

 Demonstrated success managing complex, high-value strategic accounts

 Strong understanding of drug development workflows

 Ability to operate e􀆯ectively in a performance-driven, growth-oriented environment

 Strong organizational skills with a track record of operational discipline and

execution

 Willingness to travel regionally and occasionally nationally

Preferred

 Experience selling analytical instrumentation or pharmaceutical enabling

technologies

 Familiarity with capital equipment sales cycles

 MBA or advanced scientific degree

 Experience working cross-functionally within a global organization

What Success Looks Like

 Measurable contribution to Pion’s strategic growth targets

 Strong penetration and expansion within assigned key accounts

 Accurate forecasting and disciplined account management

 High customer trust and long-term partnership development

 Consistent demonstration of operational excellence and accountability

Why Join Pion

 Be part of a respected scientific company entering an exciting new growth phase

 Work with enhanced technologies that are expanding Pion’s impact in drug

development

 Operate in a role where individual performance directly influences company

success

 Collaborate with a knowledgeable, committed team focused on execution and

results

 Competitive compensation, incentive plan and benefits

Position Summary

603 Manufacturing is seeking a detail-oriented Cable Assembly Engineer to support the development and optimization of cable and wire harness manufacturing processes. This role is responsible for creating clear, accurate, and efficient work instructions for production teams, ensuring consistent quality and manufacturability of cable assemblies. The ideal candidate has hands-on experience with cable assembly manufacturing and a strong ability to translate engineering documentation into practical, production-ready instructions.

Minimum Qualifications

Education:

• Bachelor’s degree in Mechanical, Electrical Engineering, or a related field required.

Experience:

• 3–5 years of experience creating work instructions for cable assembly manufacturing.
• Experience working in a manufacturing environment involving cable assemblies or wire harnesses.
• Experience with Lean Manufacturing, Six Sigma, and process improvement tools.
• Knowledge of IPC-620 and IPC-620-S.

Knowledge:

• Strong knowledge of manufacturing process development, process validation, and continuous improvement.

Skills:

• Ability to read and interpret electrical schematics, cable drawings, and assembly prints.
• Strong documentation and technical writing skills.
• Proficiency with Microsoft Office (Word, Excel, PowerPoint) and documentation tools.
• Experience with ERP/MRP systems and manufacturing documentation is preferred.
• Strong attention to detail and organizational skills.
• Ability to collaborate effectively with cross-functional teams.

Job Responsibilities

• Develop and maintain detailed work instructions and visual documentation for cable and wire harness assembly processes.
• Interpret customer drawings, schematics, and specifications to create accurate manufacturing documentation.
• Collaborate with production, quality, and engineering teams to ensure processes are efficient, repeatable, and compliant with customer requirements.
• Support new product introduction (NPI) by developing manufacturing processes and documentation.
• Create and maintain Bills of Materials (BOMs), process flows, and routing instructions in the company ERP/MRP system.
• Evaluate assembly processes and recommend improvements to increase efficiency, quality, and throughput.
• Assist with troubleshooting manufacturing issues related to cable assembly processes and documentation.
• Ensure documentation aligns with quality standards and internal procedures.
• Support training of production staff on new or updated work instructions.
• Participate in continuous improvement initiatives within the manufacturing environment.
• Ensure compliance with aerospace, space, and defense industry standards such as AS9100, IPC/WHMA-A-620, NASA STD-8739, and customer-specific requirements.
• Resolve production issues by collaborating with quality and engineering manager to identify root causes and implement corrective actions.

Internal and External Relationships

This position interacts with multiple departments on a regular basis, including engineering and quality. This position will also be highly interactive on the Production floor, working with the Assemblers.

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Position Summary

603 Manufacturing is growing, and we are looking for a hands-on, detail-driven NPI / Manufacturing Engineer who thrives on turning complex, high-reliability builds into clean, repeatable, audit-ready processes. This role is especially critical as we support customers in the space and aerospace sectors, where documentation, traceability, and process control are non-negotiable. If you get fired up about transforming first builds into flight-ready production systems, this role is for you.

What You’ll Do

Lead New Product Introduction (NPI)

• Own the manufacturing ramp-up for new cable and electro-mechanical assemblies
• Translate engineering drawings, specifications, and customer requirements into production-ready processes
• Support and fully document first piece builds from prototype through production release
• Ensure builds meet space and aerospace level workmanship and documentation standards

Develop Flight-Ready Work Instructions

• Create clear, visual, step-by-step work instructions for complex cable assemblies
• Standardize documentation across programs to meet customer and regulatory expectations
• Build controlled, revision-managed documentation packages
• Incorporate inspection criteria, torque values, crimp specifications, test procedures, and traceability requirements

Space and Aerospace Compliance

• Interpret and implement customer flow-down requirements
• Ensure compliance with applicable standards such as:
• IPC/WHMA-A-620, Space Addendum preferred
• NASA workmanship standards where applicable
• AS9100 principles and documentation rigor
• Establish full material traceability and lot control processes
• Support first article inspections and customer audits
• Build processes that are repeatable, traceable, and audit-ready

First Piece and Process Development

• Capture photos, tooling setups, fixturing, inspection points, and lessons learned during first builds
• Identify risk areas early including handling, routing, strain relief, testing, and labeling
• Define quality gates and inspection checkpoints
• Convert tribal knowledge into controlled documentation

Standardization and Continuous Improvement

• Develop scalable templates for cable assembly documentation
• Drive consistency across programs and operators
• Improve throughput while maintaining zero-defect expectations
• Reduce variability in high reliability builds

What Makes You a Great Fit

• 5 or more years in manufacturing engineering, NPI, or process engineering
• Direct experience supporting space, aerospace, or other high-reliability customers
• Strong understanding of:
• IPC/WHMA-A-620, Space Addendum strongly preferred
• First Article Inspection, AS9102 experience a plus
• Configuration control and revision management
• Lot traceability and material control systems
• Experience building processes that withstand customer audits
• Comfortable on the production floor. This is not a desk-only role.
• Process-driven, detail-focused, and quality-first mindset

Bonus Points If You Have

• Experience supporting NASA, commercial space, or defense programs
• Experience working in an AS9100 environment
• Familiarity with controlled documentation systems such as PLM, ERP, or QMS
• Lean or Six Sigma background
• Experience building documentation systems from scratch

What Success Looks Like

• New space programs transition from first article to stable production smoothly
• Documentation passes audits without scrambling
• Full traceability exists from raw material to finished assembly
• Operators have clear, easy-to-follow instructions
• Builds are consistent, repeatable, and flight-ready

Why 603 Manufacturing?

We support customers who cannot afford failure. When it goes to space, it must work.

At 603, we are building the systems, documentation discipline, and manufacturing rigor to support high-reliability programs. We need engineers who understand what that truly requires.

You will not just document processes here. You will build the foundation for flight-ready manufacturing.

Position Overview

603 Manufacturing is a high-reliability cable and harness manufacturer serving space, aerospace, and defense customers. We build mission-critical hardware where workmanship, documentation discipline, and on-time delivery are non-negotiable.

The Production Supervisor leads daily operations on the shop floor, ensuring safe, efficient execution of complex Class 3 and Space Addendum assemblies. This role is hands-on and highly visible. The Supervisor drives schedule adherence, labor efficiency, quality performance, and team development while maintaining strict compliance with AS9100 and customer-specific workmanship standards.

This is not a clipboard supervisor role. This leader is present on the floor, removes barriers, and drives flow.

Key Responsibilities

Execution & Delivery

• Own daily production performance against the master schedule
• Monitor WIP flow and eliminate bottlenecks
• Partner with Planning and Scheduling to prioritize work based on shipment commitments
• Ensure daily output aligns with monthly shipment targets
• Track and report schedule attainment and labor efficiency

Quality & Workmanship Discipline

• Enforce IPC/WHMA-A-620 Class 3 and Space Addendum standards
• Ensure strict compliance with customer workmanship specifications
• Drive first-pass yield and reduce rework
• Support internal audits, customer audits, and corrective actions
• Maintain disciplined documentation and traveler integrity

Team Leadership & Development

• Lead, coach, and develop a team of high-skill operators
• Conduct daily tier meetings focused on safety, quality, and delivery
• Promote cross-training and workforce flexibility
• Reinforce accountability and performance standards
• Support formal training requirements and certification tracking

Continuous Improvement

• Identify and eliminate waste (travel, waiting, excess handling, rework)
• Improve work cell layout and flow
• Support lean initiatives and standard work development
• Drive measurable improvements in throughput and efficiency

Compliance & Safety

• Ensure AS9100 process compliance within production areas
• Maintain ITAR and controlled data discipline
• Enforce ESD and FOD controls
• Maintain safe, organized work environments

Required Qualifications

• 5+ years of experience in aerospace, defense, or high-reliability manufacturing
• 2+ years of leadership or supervisory experience
• Strong understanding of IPC/WHMA-A-620 Class 3 (Space Addendum preferred)
• Ability to interpret complex engineering drawings and build documentation
• Experience working within AS9100 environments
• Strong problem-solving skills and bias toward action

Preferred Qualifications

• Experience supporting commercial space or launch vehicle programs
• Lean manufacturing experience
• ERP experience (Epicor preferred)
• Experience in controlled technical data environments (ITAR)

What Success Looks Like at 603

• Production schedules consistently achieved
• Improved labor efficiency and reduced stagnation in work cells
• High workmanship discipline and audit-ready documentation
• Strong cross-trained team with low rework
• A floor culture focused on accountability and flow

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Quality Manager – Direct Hire | 1st Shift

Chelmsford, MA

1st Shift

Direct Hire

About the Role

We are seeking an experienced Quality Manager to lead all Quality operations within a growing aerospace/advanced manufacturing environment. This role oversees quality systems, compliance, audits, supplier management, documentation, and continuous improvement initiatives. The ideal candidate brings strong leadership, deep understanding of AS9100, and the ability to drive a high‑performing quality culture.

Responsibilities

• Lead and develop the Quality team through coaching, training, performance reviews, and career planning.
• Manage and maintain all aspects of the Quality Management System (QMS), including AS9100 compliance, audits, and procedure updates.
• Oversee monthly/annual metrics, documentation control, ECO processing, and risk & opportunity tracking.
• Manage CAPA processes (customer, supplier, internal), NMR/MRB workflows, and GIDEP alerts.
• Serve as the primary quality interface for customers and suppliers, supporting reviews, issue resolution, and status updates.
• Support RFQ and Contract Review processes by validating requirements, flow‑downs, QA codes, and risk entries.
• Oversee supplier approvals, certification tracking, site visits, and quarterly supplier ratings.
• Manage calibration systems, PM documentation, government property equipment logs, and inspection activities (incoming, in‑process, final).
• Support NIST/CMMC compliance with IT and complete actions related to infrastructure and cybersecurity.
• Conduct new‑hire onboarding and coordinate training with HR and Manufacturing leadership.
• Maintain compliance with NAVSUP GFP requirements and conduct monthly walk‑around assessments.
• Drive continuous improvement across all quality processes and cross‑functional operations.

Minimum Requirements

• Bachelor’s degree in Business, Engineering, or related field
• 10+ years of relevant experience
• Strong written and verbal communication skills
• Analytical problem‑solving skills
• Background in Total Quality Management and process improvement
• IPC certifications a plus
• Ability to travel to customer sites as needed
• Attention to detail and strong organizational ability
• Experience in printed circuit boards or related manufacturing preferred

Job Title : Aerospace Quality Inspector

Location : Chelmsford MA

Pay range : $60000 - $63000

Duration : Full time

Job Description

Position

Quality Inspector – reporting to Quality Manager

______________________________________________________________________________

Responsibilities

Responsible for inspecting in-process and finished products to ensure they meet customer and industry specifications and quality performance standards. Reviews incoming work to determine production requirements. Inspects products and materials, reports inspection results and documents non-conformances to ensure that inspected materials meet engineering specifications. Troubleshoots problems and initiates corrective action when possible. Performs inspection tasks using a variety of test instruments.

• Performs visual, mechanical, and electrical inspections on in-process and finished products ensuring they meet workmanship standards. Compares results against engineering and quality specifications.

• Assists other inspectors working on complex assignments.

• Sets-up and operates a variety of test instruments and equipment. Performs and reviews pull testing. Uses parts lists, Bills of Materials, work instruction in performance of tasks

• Completes required inspection records including non-conformance statistics, equipment malfunctions. Assists in statistical charting.

• Logs product status in database using computer terminal.

• Participates in Total Quality Management (TQM) initiatives in conducting daily tasks.

• Responsible for own safety following company and OSHA guidelines.

Minimum Requirements

The successful candidate should possess the following qualifications:

• Not less than five years previous experience in quality inspections, preferably electromechanical environment
• Strong written and verbal communication skills
• Knowledge of interpret blueprints and engineering specifications
• Proficient with Microsoft Office
• IPC- A-610 and IPC-A-620

Dexian is a leading provider of staffing, IT, and workforce solutions with over 12,000 employees and 70 locations worldwide. As one of the largest IT staffing companies and the 2nd largest minority-owned staffing company in the U.S., Dexian was formed in 2023 through the merger of DISYS and Signature Consultants. Combining the best elements of its core companies, Dexian's platform connects talent, technology, and organizations to produce game-changing results that help everyone achieve their ambitions and goals. Dexian's brands include Dexian DISYS, Dexian Signature Consultants, Dexian Government Solutions, Dexian Talent Development and Dexian IT Solutions. Visit to learn more. Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

Job Title: Manufacturing Engineer – BOM & Configuration Management

Location: Chelmsford MA

Duration: Full time

Pay rate : $60000 – $65000 / annum

Manufacturing Engineer – BOM / Configuration Management

We are seeking a Manufacturing Engineer to support product documentation and configuration management for electronics manufacturing operations. This role will focus on creating and maintaining multi-level Bills of Materials (BOMs) and manufacturing documentation for PCBA, cable assemblies, and electro-mechanical products.

Key Responsibilities

• Create and maintain single-level and multi-level BOMs in ERP/MRP/PLM systems
• Translate engineering drawings and schematics into structured manufacturing documentation
• Process Engineering Change Orders (ECOs) and Engineering Change Notices (ECNs)
• Develop assembly documentation, work instructions, and manufacturing process flows
• Support new product introduction (NPI) and design transfer to manufacturing
• Collaborate with engineering, supply chain, quality, and production teams
• Maintain product configuration control and documentation accuracy

Qualifications

• Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent experience)
• 3–7+ years of manufacturing engineering or product documentation experience
• Experience with BOM management, ECO/ECN processes, and ERP/PLM systems
• Background in electronics manufacturing (PCBA, SMT, electro-mechanical assembly) preferred
• Strong organizational, documentation, and communication skills

This is an onsite role supporting manufacturing operations and product documentation within a collaborative engineering environment.

Dexian is a leading provider of staffing, IT, and workforce solutions with over 12,000 employees and 70 locations worldwide. As one of the largest IT staffing companies and the 2nd largest minority-owned staffing company in the U.S., Dexian was formed in 2023 through the merger of DISYS and Signature Consultants. Combining the best elements of its core companies, Dexian's platform connects talent, technology, and organizations to produce game-changing results that help everyone achieve their ambitions and goals. Dexian's brands include Dexian DISYS, Dexian Signature Consultants, Dexian Government Solutions, Dexian Talent Development and Dexian IT Solutions. Visit to learn more. Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

Tewksbury, Ma (On-Site)

The successful candidate will have the knowledge and experience to lead the in-house engineering team in the design and construction of complex process-facility projects. 

Projects include new design and construction of manufacturing plants and facilities, and rehabilitation of existing plants/facilities and other high-hazard environments. 

A design engineer with hands on experience who can effectively manage their time and complete tasks on their own. 

Requirements 

B.S. in Chemical Engineering as a minimum

8+ years’ experience in chemical process engineering

Ability to work closely with a team of engineers of varied backgrounds and expertise and effectively align solution delivery with vendors to ensure ultimate satisfaction of the client’s requirements

Time management skills to deal with competing priorities while setting progressive yet realistic time frames and expectations relative to project deliverables

The Chemical Process Engineer will work to support the entire team in the execution of projects. Having knowledge of, and ability to perform, the following is required:

Working independently

Developing material and energy balances and process flow diagrams (PFD’s);

Development of piping and instrumentation diagrams (PID’s)

Equipment sizing, specifying and purchasing;

Equipment and piping layout design support,

Process and utility calculation

Why work with us?

At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants.

Benefits of joining Impact Fire Services

When you join Impact Fire you will receive:

• Competitive compensation
• Pay is on a weekly cycle, every Friday
• Career Advancement Opportunities
• Competitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays
• Company paid short and long-term disability
• Immediately vested in our 401(k) company match
• Full-time employees participate in our Shared Ownership Program which offers a monetary bonus aligned to the company's long-term success. This program fosters an ownership mindset and ensures that every employee meaningfully shares in the success they help create.
• Exceptional guidance and support from our managers
• Collaborative culture & environment
• Robust training opportunities with company reimbursement upon achieving required licensing
• Apprenticeship programs for fire sprinkler, fire alarm and inspection positions
• Opportunity to work alongside some of the best talent in the fire protection industry

Responsible for inspection, installation, and repair of Wet, Dry, Pre-action, Deluge and Foam systems; Testing, rebuilding and/or replacing Backflow Preventers. Responsible for identifying trouble areas and performing service in an efficient and professional manner to ensure that sprinkler systems are operating properly. We seek a self-motivated, customer service-oriented lead technician. The ideal candidate will be organized, professional, and a good communicator. This important position will establish a rapport and build positive relationships with our customers.

$10,000 sign-on bonus based on experience!!

Responsibilities include:

Sprinkler and Backflow Systems Installation, Repair, & Service:

• Prepare jobsite, performing visual inspection of system, disabling horn & strobes, and alerting alarm company and fire department.
• Install/hang sprinkler systems and their components per NFPA and engineering guidelines.
• Install or replace wet, dry, pre-action, deluge and foam systems as needed.
• Repair and/or replace all sprinkler systems components.

Repair, replace and rebuild backflow preventers as necessary.

• Verify proper communication with monitoring station when working on a monitored system after repair.
• Perform system tests to verify alarm & sprinkler systems are working properly upon completion of repair.
• Complete installation paperwork in a timely manner and turn completed paperwork into branch management.
• Report Deficiencies to Department Manager.

Qualifications

• Massachusetts Fire Sprinkler Journeyman License
• 1-3 years field experience in Sprinkler and Backflow systems service.
• Fire and /or Life Safety Systems experience.
• Must have or be able & willing to attain state Sprinkler and/or Backflow Licenses.
• Possess a valid driver’s license and driving record that meets company requirements.
• Must have a strong mechanical aptitude.
• Must be able to visually inspect and service sprinkler and backflow systems.
• Must be able to recognize alarm sights and sounds.
• Strong working knowledge of NFPA codes.
• May require ability to effectively use a Sprinkler Pipe Threader.
• Must be able to effectively use backflow tester, pipe wrench, various lifts and common pipe fitting tools.

Preferred Qualifications

• 3-5 years of proven success in performance of Sprinkler inspection, installation, and service is highly preferred.
• NICET Certification in Inspection & Testing of Water-Based Systems and/or Water-Based Systems Layout, preferred.

Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions.

We look forward to talking with you about career opportunities with Impact Fire Services.

Employment with an Equal Opportunity Employer (EOE) including disability/veterans.

We are looking for an experienced industrial property and building manager to join our client's real estate development team. Candidates must live in or near the Fitchburg, Wilmington, or Billerica area to be considered.

Key Responsibilities

• Own day-to-day operations of assigned properties, including full financial and physical performance
• Serve as primary point of contact for tenants; oversee vendor coordination and issue resolution
• Manage property financials including payables/receivables, budget development, variance tracking, and reporting
• Lead annual operating and capital budget preparation
• Conduct and formalize comprehensive inspection programs (weekly, monthly, quarterly, annual)
• Review and approve annual lease reconciliations and tenant estimates
• Interpret and negotiate commercial lease language and vendor contracts
• Bid, negotiate, award, and oversee service contracts in alignment with company standards
• Monitor vendor performance to ensure compliance with contractual and service-level expectations
• Partner with accounting to ensure accurate, timely reporting and contract compliance
• Oversee tenant improvements and capital projects from construction through move-in, ensuring lease compliance and smooth transition
• Support acquisitions and dispositions, including due diligence coordination with development and construction teams
• Ensure compliance with company policies, regulatory requirements, and governmental directives
• Represent the company professionally in all internal and external interactions

Qualifications

• Bachelor’s degree in Business Administration or related field preferred
• 3+ years of commercial property management experience
• Strong understanding of budgeting, lease analysis, and building operations
• Experience negotiating commercial leases and vendor contracts
• Ability to manage multiple priorities and exercise sound judgment in a fast-paced environment
• Strong analytical, organizational, and delegation skills
• Proficiency in Microsoft Office; experience with Yardi and/or Building Engines preferred
• Excellent written and verbal communication skills
• Proven ability to build strong tenant relationships and deliver high-quality service
• Self-directed with the ability to work independently and collaboratively

Account Executive

Join a high-performing sales team at FootBridge, where you will develop new business and work with clients across the Energy, Industrial, Manufacturing, Engineering, and Construction markets nationwide. As an account executive you will develop new business, build client relationships and work closely with the recruiting team to deliver the highest quality service. The position requires strategic thinking, strong organizational skills, and the ability to develop long-term professional relationships.

Responsibilities

• Strategically develop new business with potential clients in the energy industry
• Work with clients to gain an understanding of their project-based challenges
• Build lasting relationships with clients and expand business opportunities
• Understand the strategic goals, objectives and organizational structure of targeted companies
• Work with the recruiting team to deliver the highest quality resources to clients

Qualifications

• Bachelor’s degree or equivalent experience
• Proven consultative sales experience required
• Effective organization and time management skills
• Effective written and verbal communication skills
• Willingness to work an extended schedule and travel as necessary

Compensation / Benefits

• $60-70k base salary plus uncapped commissions
• Typical first year earnings of $90-100k; realistic long-term potential of $200-300k+
• Progressive commission plan up to 18% of total gross profit
• Comprehensive benefits including medical, dental, vision, and 401k
• Flexible work schedule and PTO policy

FootBridge is an equal opportunity employer committed to an inclusive environment where everyone is valued and respected. We make employment decisions based on qualifications and business needs, without discrimination on any basis, and we welcome candidates from diverse backgrounds to apply.

Learn more at

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Systems Engineering & Test Capabilities team discipline is seeking a Test Architect to support the NASAMS® surface to air defense system programs.  The Test Architect (TA) will be accountable for architecting a technically sound approach for the Test and Evaluation (T&E) strategy for the entire lifecycle of the product along with influencing the prime item architecture to support that strategy.
 

What You Will Do

• Responsible for test strategy for all aspects of the program and defines metrics to gauge progress.

• Responsible for defining or optimizing test environments and requirements to ensure on-time deliveries.

• Responsible for interface and coordination with internal and external organizations on test strategy, coordination, execution, and reporting activities.

• Extensive interaction with Program Managers, Directorate Leads, Chief Engineers, and technical subject matter experts (SMEs).

• Coordinate with other program disciplines to draw on their SMEs to address emergent issues across the systems, software, and hardware domains.

• Represent the interests of the Systems Integration and Test (SI&T) discipline on the program.

• Interface with the customer community on a regular basis to share test status, issues, and address programmatic concerns.

• Knowledge base for Model Based Systems Engineering and how to use this in Integration and Test for test strategy.

• International travel up to 20%, Regular travel between Raytheon locations in Massachusetts and Southern New Hampshire is required.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• Experience with formal system test activities, including ground tests, flight tests, system verification, and system integration check out events

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a Final Secret U.S. government issued security clearance after start.

Qualifications We Prefer

• Excellent technical writing and formal presentation experience

• Strong proven communication skills

• Raytheon Test Architect Certification

• Experience with Department of War or similar major programs throughout the product lifecycle

• Active and transferable U.S. government issued security clearance is required prior to start date.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Welcome to Raytheon in Andover, MA

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Naval Power is seeking a highly motivated Production Integrated Product Team Lead (IPTL) for the SPY-6 Array production program’s Array Build, Integration & Testing. This position reports to the SPY-6 Production Array Program Manager and leads the execution efforts of the recurring production sell-off.  This lead will be responsible for ensuring that equipment delivery commitments are made on time and within budget, focusing on Array Build Integration & Testing, and RHS assembly builds, including Mechanical Structures & RMA Chassis material. They are responsible for removing barriers and defining solutions that support the Production IPT and program.

In addition, it is expected this person will work across all Raytheon functional organizations to staff the Production IPT and ensure the timely start-up and delivery of products in accordance with the contract(s).  

This is an onsite position located at either our Andover or Tewksbury, MA facilities.

What You Will Do

• Establish and maintain a positive culture to which top talent is attracted.

• Provide leadership and direction for the cross-functional supply chain, operations, engineering, quality, test, and logistics teams in the Production IPT with an emphasis on mitigating technical risk, assuring continuous Array production and delivery of compliant hardware to the Navy.

• Collaborate with SPY-6 Chief Engineer to provide technical oversight of Array scope to include reviews of TDP changes, planning and execution of Array Production Test & FAIs.

• Lead MLAs/RFVs/MRBs for Array build and integration issues.

• Accountability for the production scope, including aligning product EACs with SOW definition, contract values and Program Management.

• Work with Customer counterparts to understand status, schedules, priorities and objectives for events.

• Participate in management of suppliers, in coordination with the supply chain function.

• Manage engineering staffing across the Production IPT.

• Developing presentations and presenting at program management reviews (PMRs), staffing reviews, and decision reviews to achieve contract commitments.

• Display strong communication, influence management, and presentation skills, and comfortably interact with both internal and external stakeholders at all levels of leadership.

• Support the program risk and opportunity process in accordance with specific financial goals and obligations.

• Travel to support supplier reviews and programmatic meetings.

What You Will Learn

• Raytheon and RTX Business Acumen.

• SBU & SSBU organizational structure, responsibilities amongst the programs and the functional areas, and deliverables.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience. 

• Prior IPTL experience.

• Experience with financial management/analysis tools.

• Prior experience on a low-rate initial production (LRIP) or full rate production program, preferably in the aerospace and defense industry.

• Experience presenting to internal Raytheon leadership, customers, partners, and/or subcontractors.

• Active and transferable Secret U.S. government issued security clearance is required prior to start date with the ability to obtain special program access prior to start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Prior IPT lead experience with heavy interaction with Operations and Supply chain function.

• Experience working with production of SPY-6 Systems.

• Master’s Degree from an accredited university.

• Raytheon PM Certification Level 6 (or equivalent) or ability to obtain within a year.

• Demonstrated program execution experience managing program staffing, assignments and resources with cross-functional teams in an IPT organizational structure.

• Prior Functional leadership experience.

• Program execution experience under a firm fixed price contract structure.

• Demonstrated experience in leading a program or IPT over $50 million in annual sales.

• Experience working with Navy and/or International customers

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation

• Relocation Eligibility.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms