Engineering Jobs in Bristol Indiana

Position: CNC Process Engineer

Location: Middlebury Indiana

Job Description

The CNC Process Engineer will lead the standardization and optimization of CNC machining operations across multiple identical vertical machining cells. This role involves converting subject-matter expertise into clear, repeatable shop-floor documentation, defining escalation tiers, and serving as the advanced technical escalation point for unique failures. The position also drives continuous improvement initiatives focused on cycle time reduction, tool life, chip evacuation, and tooling strategy, often collaborating directly with tooling vendors to design custom solutions.

Responsibilities

Capture tribal knowledge from CNC subject matter experts and translate it into standardized documentation.

Create and maintain Standard Operating Procedures (SOPs) and Operator-Driven Reliability (ODR) tasks.

Develop troubleshooting guides and decision trees for rapid issue resolution.

Standardize documentation across identical machine cells while clearly identifying exceptions.

Establish escalation tiers and support model for operators, skilled trades, and CNC engineers.

Provide high-level CNC troubleshooting and root cause analysis.

Improve process reliability, repeatability, and uptime.

Drive continuous improvement initiatives focused on cycle time and process stability.

Lead tooling optimization efforts including tool selection, feeds/speeds, and tool life management.

Collaborate with tooling vendors to design custom tooling solutions.

Address chip evacuation and high-volume machining challenges.

Develop training materials and deliver hands-on training for operators, skilled trades, and engineering staff.

Essential Skills

5+ years of CNC machining or CNC process engineering experience.

Strong documentation and technical writing skills.

Proven experience with troubleshooting, root cause analysis, and continuous improvement.

Ability to work directly on the manufacturing floor.

Additional Skills & Qualifications

Experience with Haas NGC control.

Knowledge of Haas Advanced Tool Management (ATM).

Understanding of global macro variables, mathematical operators, and logical functions in CNC programming.

Experienced CAM programmer.

Experienced G-code programmer.

Familiarity with Midaco (or similar) pallet change systems and programming.

Extensive knowledge of tooling selection and application.

Experience with high-volume machining, automated fixturing, pallet systems, and robot automation related to CNC machining.

Work Environment

Position Summary

The Supply Chain Director is responsible for developing and executing a comprehensive supply chain strategy that supports manufacturing operations and new product development. This role collaborates with internal business units to leverage purchasing power, improve operational efficiency, and strengthen supplier partnerships.

The Director leads initiatives to diversify and expand material sourcing, reduce supply constraints, and improve overall supply chain effectiveness. This role also drives continuous improvement efforts, supports new product and process evaluations, and ensures a reliable flow of materials to support organizational growth.

Additionally, this position builds and maintains strong supplier relationships by providing consistent, fair, and timely feedback aligned with organizational values and culture.

Key Responsibilities

• Partner with New Product Development teams to ensure accurate and cost-effective material estimates for new products
• Identify, source, and implement innovative materials and solutions that create a competitive advantage
• Expand and strengthen the supply chain by engaging both existing and new suppliers, including those outside the industry
• Identify long-term supply chain constraints and implement improvement strategies
• Partner with operations to introduce new processes utilizing advanced materials and methods
• Collaborate with internal supply chain leadership to drive operational improvements
• Manage transportation, logistics, freight, and duty compliance while optimizing cost efficiency
• Lead supplier development initiatives in partnership with Quality, including scorecards, performance reviews, continuous improvement efforts, and standardized chargeback processes
• Collaborate cross-functionally with sales, product management, design, manufacturing engineering, operations, finance, and maintenance to support organizational goals
• Oversee procurement strategies including tactical purchasing, sourcing of direct and indirect materials and services, and supplier/category strategy development

Performance Focus

• Inventory management across raw materials, WIP, and finished goods
• Material cost productivity including Purchase Price Variance (PPV)
• Inventory metrics such as turns and Days on Hand (DOH)
• Perpetual inventory accuracy
• Continuous improvement in procurement and inventory performance

Education & Experience

• Strong interpersonal and leadership skills with the ability to influence cross-functional teams
• Ability to collaborate effectively with internal and external stakeholders
• Strong financial and business acumen with the ability to connect operational actions to financial outcomes
• Excellent negotiation, communication, and presentation skills
• Experience assessing supply chain risks and implementing mitigation strategies
• Ability to manage multiple projects and priorities in a fast-paced environment
• Proficiency in ERP systems and barcoding practices (NetSuite preferred)
• Advanced proficiency in Microsoft Word, Excel, PowerPoint, and analytical tools
• Action-oriented self-starter with the ability to delegate while remaining hands-on when needed

Qualifications

• Bachelor’s degree or equivalent experience required
• MBA or similar graduate degree preferred
• 10+ years of supply chain management experience
• CPIM and/or CSCP certification preferred
• Change management and facilitation experience required
• Experience leading complex projects and teams required
• 5+ years of durable goods manufacturing experience required
• Previous budget management responsibility preferred

Physical Demands

• Office environment with sitting and standing
• May require sitting for extended periods

Job Title: CNC Process Engineer

Location: Middlebury, Indiana

Job Type: Full - Time

Position Summary

The CNC Process Engineer is responsible for leading the standardization, optimization, and continuous improvement of CNC machining operations across multiple identical vertical machining cells. This role transforms subject matter expertise into standardized, repeatable documentation and structured support systems to improve reliability, repeatability, and operational uptime.

The CNC Process Engineer serves as the advanced technical escalation point for complex machining issues, drives tooling and process optimization initiatives, and collaborates closely with tooling vendors to implement innovative machining solutions.

Key Responsibilities

Process Standardization & Documentation

• Capture and formalize tribal knowledge from CNC subject matter experts into structured documentation.
• Develop, implement, and maintain Standard Operating Procedures (SOPs).
• Create Operator-Driven Reliability (ODR) tasks to support proactive maintenance.
• Standardize documentation across identical machining cells while identifying process exceptions.
• Develop troubleshooting guides, flowcharts, and decision trees for rapid issue resolution.

Technical Leadership & Escalation

• Establish clear escalation tiers for operators, skilled trades, and CNC engineers.
• Serve as the primary escalation point for advanced CNC troubleshooting.
• Perform root cause analysis on recurring or complex machining failures.
• Improve process reliability, repeatability, and machine uptime.

Continuous Improvement & Optimization

• Lead cycle time reduction and process stability initiatives.
• Optimize tooling strategies including tool selection, feeds and speeds, and tool life management.
• Address chip evacuation challenges in high-volume machining environments.
• Collaborate with tooling vendors to design and implement custom tooling solutions.
• Improve machining efficiency across palletized and automated systems.

Training & Development

• Develop training materials and process documentation.
• Deliver hands-on training to operators, skilled trades, and engineering personnel.
• Support knowledge transfer and capability development within the organization.

Required Qualifications

• Minimum of 5 years of CNC machining or CNC process engineering experience.
• Strong technical writing and documentation skills.
• Proven expertise in troubleshooting and root cause analysis.
• Demonstrated experience driving continuous improvement initiatives.
• Ability to work hands-on in a manufacturing floor environment.

Preferred Qualifications

• Experience with Haas NGC control systems.
• Knowledge of Haas Advanced Tool Management (ATM).
• Proficiency in global macro variables, mathematical operators, and logical functions in CNC programming.
• Advanced CAM programming experience.
• Strong G-code programming capabilities.
• Experience with Midaco or similar pallet change systems and programming.
• Extensive knowledge of tooling selection, application, and high-volume machining strategies.
• Experience with automated fixturing, pallet systems, and robotic automation integrated with CNC machining.

Job Title: CNC Programmar

Location: Middlebury, Indiana

Job Type: Full - Time

Position Summary

The CNC Process Engineer is responsible for leading the standardization, optimization, and continuous improvement of CNC machining operations across multiple identical vertical machining cells. This role transforms subject matter expertise into standardized, repeatable documentation and structured support systems to improve reliability, repeatability, and operational uptime.

The CNC Process Engineer serves as the advanced technical escalation point for complex machining issues, drives tooling and process optimization initiatives, and collaborates closely with tooling vendors to implement innovative machining solutions.

Key Responsibilities

Process Standardization & Documentation

• Capture and formalize tribal knowledge from CNC subject matter experts into structured documentation.
• Develop, implement, and maintain Standard Operating Procedures (SOPs).
• Create Operator-Driven Reliability (ODR) tasks to support proactive maintenance.
• Standardize documentation across identical machining cells while identifying process exceptions.
• Develop troubleshooting guides, flowcharts, and decision trees for rapid issue resolution.

Technical Leadership & Escalation

• Establish clear escalation tiers for operators, skilled trades, and CNC engineers.
• Serve as the primary escalation point for advanced CNC troubleshooting.
• Perform root cause analysis on recurring or complex machining failures.
• Improve process reliability, repeatability, and machine uptime.

Continuous Improvement & Optimization

• Lead cycle time reduction and process stability initiatives.
• Optimize tooling strategies including tool selection, feeds and speeds, and tool life management.
• Address chip evacuation challenges in high-volume machining environments.
• Collaborate with tooling vendors to design and implement custom tooling solutions.
• Improve machining efficiency across palletized and automated systems.

Training & Development

• Develop training materials and process documentation.
• Deliver hands-on training to operators, skilled trades, and engineering personnel.
• Support knowledge transfer and capability development within the organization.

Required Qualifications

• Minimum of 5 years of CNC machining or CNC process engineering experience.
• Strong technical writing and documentation skills.
• Proven expertise in troubleshooting and root cause analysis.
• Demonstrated experience driving continuous improvement initiatives.
• Ability to work hands-on in a manufacturing floor environment.

Preferred Qualifications

• Experience with Haas NGC control systems.
• Knowledge of Haas Advanced Tool Management (ATM).
• Proficiency in global macro variables, mathematical operators, and logical functions in CNC programming.
• Advanced CAM programming experience.
• Strong G-code programming capabilities.
• Experience with Midaco or similar pallet change systems and programming.
• Extensive knowledge of tooling selection, application, and high-volume machining strategies.
• Experience with automated fixturing, pallet systems, and robotic automation integrated with CNC machining.

Company Overview:

Dura-Shiloh is inspired to play a lead role in advancing safe, sustainable, and innovative mobility. Our Agile focus on product innovation and process efficiency builds expertly crafted lightweight products and mechatronic systems that deliver superior function and value.

Success is only created through the well-being of our customers, our people, and our plant. Our world continues to become more connected with mobility at the forefront of innovation. As vehicles transform to lightweight and electric platforms, Dura-Shiloh will continue to inspire and lead.

To learn more about our company, visit

Our benefits include bonuses; healthcare; insurance benefits; retirement programs; paid time off plans; family and parenting leaves; tuition reimbursement; service and performance awards as well as various social and recreational activities.

Who we want:

• Collaborative partners. People who build and leverage cross-functional relationships to bring together ideas, data, and insights to drive continuous improvement.
• Business-oriented evaluators. People who effectively interpret information to demonstrate the effects of business initiatives, regulations, management, and leadership teams.

Position Description:

The Production Manager (PM) is responsible for providing leadership and systems to efficiently operate all production, as well as provide support towards corporate initiatives. In this role, the PM will work toward continuously improving all processes focusing on the elimination of non-value add operations and waste in the supply chain while working with other departments as necessary to support these goals.

Essential Duties and Responsibilities

• Ensure that the plant has a SPS strategy and roadmap leading to the achievement of lean processes and lean operating practices to achieve optimum results and consistency in each plant.
• Responsible for the overall safety of all employees ensuring proper procedures are applied when working operations and maintaining a safe physical
• Provide supervision and technical leadership. Coach and develop Group Leaders and Team Leaders to become business leaders.
• Lead the application of SPS tools and appropriate project planning tools to improve processes, eliminate waste, and reduce cycle time. Facilitate the identification, selection, prioritization and assignment of projects with an emphasis on those that have breakthrough potential.
• Be fully conversant with the operation and performance parameters of the Value Stream Unit production equipment and its effective use as a production tool from the concurrent perspective of safety, production, and quality.
• Meet customer requirements for quality and delivery.
• Respond quickly and effectively to direct customer requests as well as Shiloh sales and marketing requirements for information, quotation, documentation an prototype parts.
• Achieving established budget
• May perform other duties as needed

Supervisory Responsibilities

Manages the activities of Production Staff and all Business Unit production employees.

Qualifications:

Education and/or Experience

• Bachelor’s Degree in Engineering or Production Management or related technical field preferred and minimum of 5 years related experience in the automotive industry preferred.
• Current Shiloh employee with appropriate experience in progressively higher positions and enrolled in classes to pursue appropriate degree necessary.

Skills and Abilities

• Experience in working with MRP and other inventory systems.
• Competent in working with Microsoft Office software, including Word, Excel, MPCS and PowerPoint
• Ability to communicate effectively both orally and in writing.
• Understanding and experience in Lean Manufacturing and Six Sigma Methods
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Conflict resolution skills

Certificates, Licenses, and Registrations

None required

What you will enjoy:

• Culture that supports teamwork to deliver results.
• Workplace where teams care about each other and your voice is heard.
• Learning and development opportunities.
• 401(k) program with 4% company match
• Dental insurance
• Employee assistance program
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Parental leave
• Relocation assistance
• Retirement plan
• Vision insurance

Equal Employment Opportunity

Dura-Shiloh is an Equal Opportunity and Affirmative Action Employer. Shiloh is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law.

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Position Overview

We are seeking an experienced CNC Process Engineer to lead the standardization and optimization of CNC machining operations across multiple identical vertical machining cells. This role focuses on converting subject-matter expertise into structured, repeatable shop-floor documentation while serving as the advanced technical escalation point for complex machining issues.

The ideal candidate will drive continuous improvement initiatives targeting cycle time reduction, tool life optimization, chip evacuation, and tooling strategies, working closely with tooling vendors to develop custom solutions.

Key Responsibilities

• Capture tribal knowledge from CNC SMEs and convert it into standardized documentation.
• Create and maintain Standard Operating Procedures (SOPs) and Operator-Driven Reliability (ODR) tasks.
• Develop troubleshooting guides and decision trees for rapid issue resolution.
• Standardize processes across identical machine cells while identifying and documenting exceptions.
• Establish escalation tiers and structured support models for operators, skilled trades, and CNC engineers.
• Perform advanced CNC troubleshooting and root cause analysis.
• Improve process reliability, repeatability, and equipment uptime.
• Lead continuous improvement initiatives focused on:
• Cycle time reduction
• Process stability
• Tool life optimization
• Optimize tooling strategies including:
• Tool selection
• Feeds and speeds
• Tool life management
• Collaborate with tooling vendors to design and implement custom tooling solutions.
• Address chip evacuation and high-volume machining challenges.
• Develop training materials and provide hands-on training to operators, skilled trades, and engineering staff.

Required Qualifications

• 5+ years of CNC machining or CNC Process Engineering experience.
• Strong technical documentation and writing skills.
• Proven experience in troubleshooting, root cause analysis, and continuous improvement.
• Hands-on experience working directly on the manufacturing floor.

Preferred Qualifications

• Experience with Haas NGC control systems.
• Knowledge of Haas Advanced Tool Management (ATM).
• Strong understanding of:
• Global macro variables
• Mathematical operators
• Logical functions in CNC programming
• Experienced CAM programmer.
• Strong G-code programming background.
• Familiarity with Midaco (or similar) pallet change systems.
• Extensive tooling selection and application knowledge.
• Experience with:
• High-volume machining
• Automated fixturing
• Pallet systems
• Robot automation in CNC environments

Work Environment

• Fully onsite in Middlebury, Indiana.
• Hands-on role on the manufacturing floor.
• Collaboration with cross-functional teams and tooling vendors.
• Daily per diem provided.

Position Description

Ryder is hiring an experienced Mid-Level Diesel Technicianin Elkhart, IN — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Call Nick or text "Elkhart" to 9

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $27.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $2000 at 30 days and $2000 at 90 days
  
  
• Schedule: Monday–Friday
  
  
• Hours: Second Shift 3:00 pm – 11:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Call Nick or text "Elkhart" to 9

Apply Here with Ryder Today

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Call Nick or text "Elkhart" to 9

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work, required
  
  
• Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties
  
  
• Performs standard vehicle maintenance
  
  
• Performs standard component inspections and repairs
  
  
• Performs preventive maintenance
  
  
• Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
  
  
• Identifies root cause of basic failures/conditions and perform repairs as required
  
  
• Replaces defective components as instructed
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Performs other support duties as required to support operations. These could include but are not limited to Service Island support
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 2 weeks ago (3/4/2026 2:29 PM)

Requisition ID 2

Location (Posting Location) : State/Province IN

Location (Posting Location) : City ELKHART

Location (Posting Location) : Postal Code 46516

Category Technicians/Service Employees4

Additional Locations (use this field to indicate if position can be domiciled in several areas) US-IN-SOUTH BEND | US-IN-Goshen

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000120

Min Pay USD $27.00/Hr.

Max Pay USD $27.00/Hr.

Industrial Engineer – Direct Hire Opportunity

LHH is currently seeking an Industrial Engineer for a full-time, Direct Hire, permanent position with a top Manufacturing Engineering client. This role combines industrial engineering expertise and continuous improvement leadership to design, analyze, and optimize production systems that improve safety, quality, and throughput in a fast-paced manufacturing environment.

Location-Onsite: South Bend- Elkhart Region, IN

Schedule: Monday–Friday, 7:00 AM–4:00 PM (flexibility available)

Compensation: $90,000–$110,000 annually (may be negotiable based on experience)

***Must be authorized to work in the U.S. without employer sponsorship.***

About the Role

The Industrial Engineer will be responsible for developing efficient manufacturing processes, standardizing work, and supporting operational transformation initiatives. This position plays a key role in driving improvement across production operations by applying lean principles, data analysis, and structured problem-solving methodologies.

Key Responsibilities

• Design and implement efficient manufacturing processes, equipment, and factory layouts to

enhance productivity and quality

• Analyze production schedules, workflows, and methods to assess current and future

operational requirements

• Lead and support continuous improvement initiatives
• Support manufacturing transformation efforts through lean principles and practices
• Prepare financial justifications and cost analyses for new process implementations
• Monitor, evaluate, and document manufacturing processes and equipment utilization
• Research, evaluate, and deploy business systems to transition processes from manual to

automated solutions

• Analyze project costs and ensure alignment with budget expectations
• Generate reports and provide data-driven insights related to ongoing projects
• Ensure new manufacturing processes are scalable and adaptable to future production needs

Education & Experience

• Bachelor’s degree in Industrial Engineering or a related field
• Experience in continuous improvement methodologies and lean practices
• Prior experience working in a manufacturing environment
• Experience with production system design and optimization
• Proficiency with Microsoft Office applications and CAD software

If you or someone in your network fits this profile and would like to apply for this Industrial Engineer position, please submit your application along with your resume using the link in this posting.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

#LHH / #JobOpening / #HiringNow / #NowHiring / #Hiring / #WorkWithUs / #JobAlert / #JobSearch / #CareerOpportunity / #HotJobs / #JoinOurTeam / #JobSeekers / #CareerGoals / #JobHunt / #JobVacancy / #ManufacturingEngineer / #EngineeringJobs / #MechanicalEngineering / #ElectricalEngineering / #IndustrialEngineering / #LeanManufacturing / #ContinuousImprovement / #ProductionQuality / #Kaizen / #LeanPrinciples / #EngineeringCareers / #EngineeringJobsUSA / #ManufacturingJobs / #ProductionEngineer / #EngineeringVacancy / #EngineeringOpportunities / #IndianaJobs /#IndianaCareers / #MidwestJobs

JOB SUMMARY:

The Director of Quality is responsible for the strategic leadership and execution of all Quality functions for the Godfrey and Hurricane brands. This role will provide the leadership to guide the manufacturing team in the development, maintenance, and improvement of all quality processes, systems, and proactive quality planning. To include: Final Inspection, In-Process Controls, Supplier Quality Assurance, Process/Systems Auditing and Discipline, Product Testing, and Finished Goods Audit. The Director partners with the Bennington Director of Quality to drive the Marine quality culture, partners with the Customer Experience team to address warranty and field-performance issues with cross-functional teams and implement robust improvements, manages Supplier Quality Engineering activities, and ensures that APQP/PPAP deliverables; DFMEAs, PFMEAs, DFM, DFA, and problem-solving methodologies are fully embedded across engineering, sourcing, ensure conformity to engineering and quality standards, and production, and measure and report quality performance as required.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Standardize Manufacturing Quality System and processes within the site, and across sites.
• Establish Manufacturing Quality fundamentals and strengthen organizational capabilities.
• Support corrective/preventative action initiatives and short-term containment of issues (CAR/CAPA).
• Develop and ensure PFMEA/DFMEA and control plans are in place to achieve plans and priorities.
• Drive standardization - CAPA, control plans, PPAP, and PFMEA / DFMEA, QMR, part traceability, routings, etc.
• Lead Quality Management Reviews utilizing but not limited to Dashboards and Scorecards (KPIs / Metrics).
• Identify and share best practices across Marine organization and other Polaris Bus.
• Mentor problem solving teams to enhance problem solving competency (8D, A3, DMAIC, 5 Why, Ishikawa).
• Provide Quality department leadership. Develops team by instilling a continuous improvement mindset and building proficiency in aspects of the Quality toolset.
• Leads the Emerging Issue response and communication for plant related issues, to avoid customer impact and minimize production impact.
• Develops process control procedures ensuring production of finished products meet quality specifications and standards.
• Conducts research on product defects and recommends modifications to products or quality standards where warranted. Assures data is formulated into useable information and communicated to the management staff.
• Reviews complaints or warranty claims received to determine where quality control emphasis should be placed at the plant to eliminate problems.
• Establishes and manages departmental budget and assists in the development of long-range goals and objectives.

SKILLS & KNOWLEDGE

• Bachelor's degree in a related technical field, preferably engineering or quality.
• 5-8 years previous manufacturing / quality assurance / engineering experience. Ideal candidate will have Marine or RV based quality system experience, automotive based experience will be considered.
• 5+ years' previous supervisory/management experience.
• Advanced knowledge of quality policies and procedures.
• Advanced knowledge of quality related tools including, but not limited to SPC, GD&T, DFMEA, PFMEA, DFM, PPAP, APQP, CAPA, DOE, ISO, Quality Systems and measurement tools.
• Strong problem-solving skills. 8D / A3, Red X, and 6 Sigma experience preferred.
• Exceptional written and verbal communication skills and Dashboards and Scorecard (KPIs / Metrics) Reporting.
• Requires excellent leadership skills for coaching technically based and cross-functional employees.

PPE REQUIREMENTS

• Safety Glasses
• Safety Shoes