What Is A Remote Controller Jobs in Usa

Job Title: Robot Programmer / Technician – Fanuc

Location: Warsaw, IN

Role Overview

We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.

This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.

This is a high-impact, floor-support role in an active manufacturing and commissioning environment.

Mandatory Skills

• 2–5 years of experience with robot setup, troubleshooting, and/or programming
• Experience with Fanuc robotics (SpotTool+ & V9.40 for R30iB Plus controller preferred)
• Certification-only Fanuc experience is acceptable
• Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts

Key Responsibilities

Programming & Optimization

• Develop, modify, and optimize Fanuc robot programs for body shop applications
• Configure robot frames, tools, payloads, and TCPs
• Support rapid program adjustments during special means builds

Commissioning & Startup Support

• Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
• Support robot cell startup and offline system work
• Assist in commissioning activities under tight timelines

Troubleshooting & Floor Support

• Troubleshoot robot alarms, motion issues, and sequence ladder logic
• Coordinate with Controls teams to validate I/O, interlocks, and handshaking
• Provide on-floor programming support during peak production periods

Quality & Collaboration

• Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
• Support containment actions and fast-turn engineering changes
• Follow all safety procedures in active manufacturing environments

Required Qualifications

• 2–5 years of industrial robotics experience
• Strong hands-on Fanuc programming and troubleshooting
• Experience in automotive body shop environments preferred
• Ability to work extended shifts in a fast-paced manufacturing setting
• Strong problem-solving and teamwork skills

Job Title: Robot Programmer / Technician – Fanuc

Location: Warsaw, IN

Role Overview

We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.

This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.

This is a high-impact, floor-support role in an active manufacturing and commissioning environment.

Mandatory Skills

• 2–5 years of experience with robot setup, troubleshooting, and/or programming
• Experience with Fanuc robotics (SpotTool+ & V9.40 for R30iB Plus controller preferred)
• Certification-only Fanuc experience is acceptable
• Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts

Key Responsibilities

Programming & Optimization

• Develop, modify, and optimize Fanuc robot programs for body shop applications
• Configure robot frames, tools, payloads, and TCPs
• Support rapid program adjustments during special means builds

Commissioning & Startup Support

• Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
• Support robot cell startup and offline system work
• Assist in commissioning activities under tight timelines

Troubleshooting & Floor Support

• Troubleshoot robot alarms, motion issues, and sequence ladder logic
• Coordinate with Controls teams to validate I/O, interlocks, and handshaking
• Provide on-floor programming support during peak production periods

Quality & Collaboration

• Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
• Support containment actions and fast-turn engineering changes
• Follow all safety procedures in active manufacturing environments

Required Qualifications

• 2–5 years of industrial robotics experience
• Strong hands-on Fanuc programming and troubleshooting
• Experience in automotive body shop environments preferred
• Ability to work extended shifts in a fast-paced manufacturing setting
• Strong problem-solving and teamwork skills

Summary:

About the Engagement: We're seeking a senior contract Kafka/Confluent administrator to own and evolve our on-prem event streaming platform, with a primary focus on Confluent Platform You will lead planning and execution of a hardware refresh for our on-prem clusters, drive rehability and performance, and embed DevOps/automation across provisioning, deployment, cheervability, and incident response. Experience with Apache Kafka and AWS MSK is desired for secondary support and cross-environment alignment. Comprehensive documentation and ranbooks are required deliverables

Kafka Platform support key Responsibilities

Design, deploy, and operate highly available Kafka clusters (on-prem, cloud, and/or managed services such as Confluent Cloud or AWS MSK).

Manage topics, partitions, quotas, retention policies, and consumer group strategies for performance and cost.

Own upgrades, patches, and migrations.

Implement and manage Kafka components: Kafka Connect, Schema Registry, MirrorMaker/Confluent Replicator, REST Proxy; familiarity with Kafka Streams and ksqlDB is a plus.

Performance tuning (producers/consumers, batching, compression, acks, ISR, controller health), throughput testing, and benchmarking.

About The Job

Title: Access Control & CCTV Lead Technician

Location: Charlotte, NC

Salary Range: $70K–$80K

Topa Group is partnered with a premier security systems integrator in Charlotte. We are seeking a highly skilled Lead Technician specializing in enterprise-level Access Control and IP Video Surveillance. This is a leadership role designed for a \"working lead\" who can expertly program complex systems while managing a field crew of 2–5 technicians. You will oversee projects from rough-in through commissioning, ensuring all installations meet our high standards for quality and local Charlotte code compliance.

Key Responsibilities

• System Leadership: Lead a crew of 2–5 technicians on-site, directing daily tasks and ensuring project milestones are met.
• Installation & Programming: Hands-on installation and high-level programming of integrated security platforms including Avigilon, Axis, Milestone, Digital Watchdog, Paxton, and Software House.
• Technical Troubleshooting: Diagnose and resolve complex networking and hardware issues, including IP camera configurations, server setups, and controller communication errors.
• Quality Control: Conduct final walk-throughs and commissioning to ensure all system components function according to the scope of work and client expectations.
• Project Documentation: Maintain accurate as-built drawings, device schedules, and daily progress reports.
• Client Interface: Serve as the primary on-site point of contact for clients, providing professional system demonstrations and basic user training.

Qualifications & Experience

• Experience: 5+ years in the commercial security industry, with at least 2 years in a lead or supervisory capacity.
• Technical Proficiency: Extensive experience with the installation and programming of major manufacturers (Avigilon, Axis, Milestone, and/or Software House preferred).
• Networking: Strong understanding of IP networking, including VLANs, POE power budgets, and network rack builds.
• Leadership: Proven ability to manage, mentor, and motivate a small field team.
• Compliance: Deep knowledge of low-voltage electrical standards and building codes.
• Licensing: Valid driver's license and ability to pass a state-required security background check (North Carolina Alarm Systems Licensing Board).

Work Environment & Benefits

• Field-Based: Majority of time spent at job sites across the Charlotte Metro area.
• Competitive Benefits: Includes 401(k) with company match, comprehensive health, dental, and vision insurance.
• Professional Growth: Paid training and manufacturer-specific certification opportunities.
• Tools & Tech: Company-provided vehicle, laptop, and specialized testing equipment.

Position: MidMarket/Enterprise Account Executive

Location: 5 days onsite in SF

Compensation: $115K to $140K base + 50/50 split + Equity

I’m partnering with a high-growth early-stage fintech company building an AI-driven platform that automates finance operations for businesses, specifically focused on modernizing how companies manage and reconcile revenue and financial workflows.

They operate at the intersection of payments infrastructure and accounting automation and are expanding their San Francisco sales team with a few new Account Executives. This is a true hunter role focused on building pipeline and winning new logos.

Core Experience Requirements

• 3–7+ years of B2B SaaS sales experience

• Strong new business / hunting background (90%+ net new focus)

• Experience carrying $750K+ ARR quota

• Proven success selling $30K–$150K ARR deals (larger deals a plus)

• Experience selling to Finance, Accounting, Operations, or RevOps leaders

Experience in one or more of the following areas is highly relevant:

• Financial workflow automation

• ERP-adjacent software (NetSuite ecosystem a plus)

• Fintech infrastructure or payment-related platforms

• Vertical SaaS selling into operational or finance teams

We’re specifically looking for individuals who:

• Self-source a meaningful portion of their pipeline (30–60%+ outbound)

• Are comfortable prospecting into CFOs, Controllers, and finance leadership

• Can articulate a structured outbound motion (accounts → personas → messaging)

• Thrive in early-stage environments without heavy enablement or established playbooks

• View ambiguity as an opportunity and are excited to help build GTM motion

• Have experience with value-based selling, business cases, and ROI-driven conversations

Nice-to-Have Background

• Experience at Series A–B startups or early GTM teams

• Demonstrated career progression and performance consistency

• Domain exposure to financial operations, ERP ecosystems, or finance automation

Benefits:

• Flexible PTO policy
• Learning & Development stipend
• Health, Dental, Vision, Life Insurance, STD, LTD HRA for Family Planning
• Equity
• TruePerks
• Commuter, FSA, HSA
• 401K plan

Position Overview

The IT Network Engineer at Spotless Brands ("Company") serves as the primary technical owner of our enterprise network architecture across all car wash locations, data centers, cloud services and corporate offices. This role is responsible for designing, implementing, securing, and operating a highly available, scalable, and cost-effective network that supports Point-Of-Sale systems, wash equipment, IoT devices, video systems, guest Wi-Fi, and corporate applications.

This is a hands-on, design-authority role. You will define standards, lead network strategy, and be the escalation point for complex network issues in a geographically distributed, business-critical environment where uptime directly impacts revenue. This role will support our cyber security capabilities and partner with vendors to ensure data and mobile career performance and availability.

This role will be the leader for delivering network services and join an exciting, growing company. You will make a difference in our business and we will invest in you to grow your career!

Key Responsibilities

Network Architecture and Deployment

• Design, implement, and support LAN, WAN, VPN, SD‑WAN, and wireless networks across corporate and retail locations
• Configure and maintain routing, switching, VLAN segmentation, and WAN connectivity
• Support onboarding and integration of newly acquired locations
• Implement scalable network designs aligned with Spotless Brands’ growth strategy
• Retail and Field Network Support
• Ensure reliable connectivity for POS systems, payment processing, tunnel controllers, license plate recognition, video and IoT water monitoring devices
• Support retail uptime requirements and minimize business disruption
• Work with Field IT teams and vendors to deploy network infrastructure at new and existing sites
• Cloud and Hybrid Networking
• Support Azure networking including VNets, VPN Gateway, private endpoints, and hybrid connectivity
• Maintain secure connectivity between on‑premise infrastructure and Azure cloud services
• Support SaaS integrations and secure internet access for distributed locations
• Network Security
• Configure and manage firewall platforms
• Implement network segmentation, VPN access, and secure remote connectivity
• Support cybersecurity initiatives aligned with NIST Cybersecurity Framework and PCI requirements
• Assist with vulnerability remediation and incident response
• Operations and Monitoring
• Monitor network performance, availability, and reliability across all sites
• Troubleshoot and resolve network outages, latency issues, and connectivity failures
• Maintain network diagrams, configurations, and documentation
• Participate in on‑call support rotation
• Vendor and Project Support
• Work with ISPs, managed service providers, and hardware vendors
• Support infrastructure upgrades, cloud migration initiatives, and SD‑WAN rollout
• Participate in technology evaluation and architecture planning

Education and Experience

• Bachelor’s degree in Information Technology, Computer Science, or related field (or equivalent experience)
• 5–10 years of enterprise network engineering experience
• Experience supporting distributed, multi‑site environments
• Strong experience with routing, switching, and firewall configuration
• Experience with enterprise wireless networks
• Experience with VPN technologies and secure remote connectivity
• Experience supporting Azure or hybrid cloud environments

Knowledge, Skills, and Abilities

• Experience with Fortinet, Cisco Meraki, Cisco, or Sonicwall networking platforms
• Experience with Azure networking (VNets, VPN Gateway, ExpressRoute)
• Experience supporting retail or distributed operational environments
• Experience with SD‑WAN solutions
• Network automation experience using PowerShell or Python
• Industry certifications such as CCNA, CCNP, AZ‑700, NSE, or equivalent
• Good organization, time management, and prioritization skills
• Excellent reasoning, analytical, problem-solving, and critical thinking skills
• Strong troubleshooting and root cause analysis skills
• Strong attention to detail

Physical Requirements

• Ability to work at a computer for extended periods of time
• Occasional travel to field sites or business locations as required; travel less than 10%
• May require occasional extended hours during system updates or incident resolution

This job description in no way states or implies that these are the only duties to be performed by the employee(s) in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities.

Spotless Brands and its subsidiaries comply with federal and state disability laws and make reasonable accommodation for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or recruitment process, please contact the Human Resources department and identify the type of accommodation or assistance you are requesting. Do not include any medical or health information in this email. The Human Resources team will respond to your email promptly.

Spotless Brands and its affiliate brands are Equal Employment Opportunity (EEO) employers. Spotless Brands invites all qualified interested applicants to apply for career opportunities. It is the policy of the company to provide equal opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran, disabled status or any other protected group status as defined by and subject to applicable federal, state and local laws. We use E-Verify to check employment eligibility: and

Summary

The Principal Power Engineer develops new electrical systems/circuits for various applications. Research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Test, simulate, validate and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing of the electrical systems they have designed.

The Principal Power Engineer works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.

Detailed Description

Performs tasks such as, but not limited to, the following:

• Work autonomously and take initiatives to manage team priorities
• Provide technical guidance and support to Staff and Sr. engineers
• Design, develop and implement technical solutions for complex projects. Participate in project planning and scheduling.
• Propose innovative solutions for performance, reliability, and features of system or product.
• Global SME with comprehensive knowledge and industry recognition. Provides technical leadership and direction to a global team of engineers.
• Reviews and interprets customer specifications and may act as primary customer contact.
• Analyze trade-offs in complex systems and recommend solutions. Develop and lead deployment strategies and plans.
• Lead and manage schematic design, Bills of material, power tree, drawings, board layout, and cross-functional design reviews
• Lead power bring-up, debugging, and support for manufacturing assembly, and deployment
• Takes responsibility for non-technical elements of an engineering project (people, financials etc.)
• Lead relationships with key vendors and partners.
• Keep up to date with relevant industry knowledge and regulations, and share within team
• Liaison with suppliers, customers, contractors, and other internal teams.
• Analyze and create reports and documentation of specifications, design, testing, debugging, and etc.
• May be a recognized expert (go to person) in one or more technical areas.

Knowledge/Skills/Competencies

• Considered a Subject Matter Expert in the area of power design, such as single/multi-phase DC/DC converter, point-of-load converter, LDO, MOSFETs, magnetics, hot-swap circuitry of how-swap controller, load switches, current sense circuit and amplifier, and etc
• Experienced in designing power systems for networking, compute, or storage products
• Experienced in high-current, low-voltage power subsystems for CPU, GPU, ASIC, SoC, and FPGA
• Experienced in PCB stack-up, power planes, and tools used to simulate voltage gradients
• Familiar with schematic capture and CAD layout tools or equivalent ones
• Proficient with circuit simulation tools such as SIMPLIS, PSPICE, and LTSPICE, or equivalent tools
• Experienced with end-to-end power delivery network design, and simulation using circuit simulation tools, Sigrity PowerDC/SI, ANSYS SIWave or equivalent, and board level correlation
• Knowledge of high-density power modules and Vertical Power Delivery (Knowledge on Integrated Voltage Regulator (IVR) is a plus)
• Experienced with power integrity evaluation
• Experienced with design and troubleshooting of power management interfaces such as PMBus, AVS, SVID and SVI2/3.
• Experienced with defining specifications and validation of power connectors, cable assemblies and fuses
• Familiar with NPI hardware design and deployment cycle
• Experienced with development of test automation for power validation that is a plus.
• Excellent verbal and written communication skills, and ability to present to various audiences effectively

Physical Demands

• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.

Typical Experience

• 11+ years' relevant work experience with 3+ in a leadership capacity.

Typical Education

• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography

Summary

The Principal Power Engineer develops new electrical systems/circuits for various applications. Research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Test, simulate, validate and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing of the electrical systems they have designed.

The Principal Power Engineer works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.

Detailed Description

Performs tasks such as, but not limited to, the following:

• Work autonomously and take initiatives to manage team priorities
• Provide technical guidance and support to Staff and Sr. engineers
• Design, develop and implement technical solutions for complex projects. Participate in project planning and scheduling.
• Propose innovative solutions for performance, reliability, and features of system or product.
• Global SME with comprehensive knowledge and industry recognition. Provides technical leadership and direction to a global team of engineers.
• Reviews and interprets customer specifications and may act as primary customer contact.
• Analyze trade-offs in complex systems and recommend solutions. Develop and lead deployment strategies and plans.
• Lead and manage schematic design, Bills of material, power tree, drawings, board layout, and cross-functional design reviews
• Lead power bring-up, debugging, and support for manufacturing assembly, and deployment
• Takes responsibility for non-technical elements of an engineering project (people, financials etc.)
• Lead relationships with key vendors and partners.
• Keep up to date with relevant industry knowledge and regulations, and share within team
• Liaison with suppliers, customers, contractors, and other internal teams.
• Analyze and create reports and documentation of specifications, design, testing, debugging, and etc.
• May be a recognized expert (go to person) in one or more technical areas.

Knowledge/Skills/Competencies

• Considered a Subject Matter Expert in the area of power design, such as single/multi-phase DC/DC converter, point-of-load converter, LDO, MOSFETs, magnetics, hot-swap circuitry of how-swap controller, load switches, current sense circuit and amplifier, and etc
• Experienced in designing power systems for networking, compute, or storage products
• Experienced in high-current, low-voltage power subsystems for CPU, GPU, ASIC, SoC, and FPGA
• Experienced in PCB stack-up, power planes, and tools used to simulate voltage gradients
• Familiar with schematic capture and CAD layout tools or equivalent ones
• Proficient with circuit simulation tools such as SIMPLIS, PSPICE, and LTSPICE, or equivalent tools
• Experienced with end-to-end power delivery network design, and simulation using circuit simulation tools, Sigrity PowerDC/SI, ANSYS SIWave or equivalent, and board level correlation
• Knowledge of high-density power modules and Vertical Power Delivery (Knowledge on Integrated Voltage Regulator (IVR) is a plus)
• Experienced with power integrity evaluation
• Experienced with design and troubleshooting of power management interfaces such as PMBus, AVS, SVID and SVI2/3.
• Experienced with defining specifications and validation of power connectors, cable assemblies and fuses
• Familiar with NPI hardware design and deployment cycle
• Experienced with development of test automation for power validation that is a plus.
• Excellent verbal and written communication skills, and ability to present to various audiences effectively

Physical Demands

• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.

Typical Experience

• 11+ years' relevant work experience with 3+ in a leadership capacity.

Typical Education

• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography

Role Overview

We are seeking a hands-on, high-impact Global Network Director to lead, align, and deliver across a large, distributed global organization.

This leader will operate with a builder mindset — architecting, modernizing, and scaling a global network ecosystem that supports enterprise offices, hyperscale data centers, and private cloud infrastructure.

The role requires a rare combination of deep technical credibility, strategic alignment with executive leadership, and the ability to execute at speed. This is not a maintenance role — it is a transformation mandate.

Scope of Responsibility

Oversight includes:

• Enterprise administration offices
• Global sales offices
• Design offices
• Enterprise data centers
• Hyperscale data center environments
• Private cloud infrastructure with AWS and Azure footprint

You will lead approximately 40–55 professionals across global teams, including internal engineers, support functions, and managed service partners.

Budget ownership and operational accountability are expected at scale.

Core Mandate

• Lead and deliver a global network transformation
• Treat Network as a Product / Network as a Service
• Drive an automation-first infrastructure strategy
• Align network strategy tightly with enterprise vision and business objectives
• Build and evolve teams end-to-end (hire, mentor, scale, optimize)
• Execute both strategic roadmap creation and hands-on architectural oversight

Technical Requirements

Network Architecture

• Deep expertise in spine-leaf architecture (strong preference)
• Experience with Arista or Cisco (leading or participating in Cisco-to-Arista transformation preferred)
• Design and build enterprise and hyperscale data centers from scratch
• Modern network design principles and scalable architectures

Network Engineering & Automation

• Network engineering leadership at enterprise scale
• Strong automation mindset (Terraform / DevOps frameworks)
• Infrastructure-as-Code expertise
• SRE / NRE operational philosophy
• VPN technologies

Network Security

Hands-on experience with:

• Palo Alto
• Fortinet
• CIS Controller or similar security governance platforms

Security architecture must be integrated into network design from day one.

Data Center & Cloud Strategy

• Build and operate modern private cloud infrastructure
• Maintain strong AWS and Azure footprint
• Cloud-agnostic mindset with modern cloud-native mentality
• Lead investments in private data centers as GPU costs and scale requirements increase
• Balance on-prem infrastructure with evolving Software-as-a-Service models

Ideal Background

• Experience in high-growth technology environments preferred
• Proven track record delivering large-scale network and data center transformations
• Experience treating the network as a product rather than a utility
• Strong execution history — not just strategic oversight
• Experience managing significant budgets and large global teams

Candidates from highly traditional environments (e.g., purely finance or healthcare legacy infrastructures) may be less aligned with the transformation mandate.

Leadership Profile

• Builder mentality — energized by creating from scratch
• High energy, delivery-oriented, and hands-on
• Capable of learning, teaching, and scaling teams A–Z
• Strong alignment with executive leadership on strategy and execution
• Long-term ownership mindset

What Success Looks Like

• Fully modernized, automation-first global network
• Successful Cisco-to-Arista transformation
• Scalable private cloud and hyperscale data center capability
• Network operating as a product with strong internal service delivery
• High-performing global team aligned to strategy and execution

TM Process & Controls, Inc. is a full-service design-build company that provides custom process and automation solutions to a wide range of manufacturing industries. Our employees' technical design and hands-on field experience has developed, executed, and commissioned technical solutions throughout the United States and the Caribbean. We are a fast-growing process & process controls company in search of a talented individual who would like to further his/her career as an Operational Technology Network Engineer.

Position Summary: Provide consultation, design, implementation and troubleshooting of industrial network and ICS cybersecurity solutions. Provide direction and coordination of OT/ICS Cybersecurity solutions for industrial projects in the food and beverage industry throughout the United States and Caribbean.

Essential Responsibilities

• Conducts industrial network assessments and report findings through professionally written reports and presentation to clients.
• Works with clients to develop industrial data centers, ICS cybersecurity and industrial network solutions, including but not limited to, system architecture, Bill of Materials, industrial networks implementation planning, and endpoint security testing/planning/deployment.
• Design, configuration and deployment of industrial networks and industrial data centers for highly available environments including but not limited to NAS, SAN, Hypervisors, clusters, industrial network switches, firewalls and Windows or Linux servers.
• Design, configuration and deployment of Windows/Linux servers for infrastructure services i.e. Active Directory, DNS, SMTP Relay, WSUS, Certificate Services, etc.
• Design, configuration and deployment of SCADA software including but not limited to, SCADA software configuration, configuration for high availability, and integrations with databases, authentication servers, etc.
• Interface with IT teams to drive IT-OT integrations to completion.
• Develops project documentation including, but not limited to, network drawings, IP address lists, server lists, functional descriptions, user requirements, etc.
• Assist ICS Cybersecurity Engineers or Manager with the implementation of security controls and security monitoring included but not limited to security appliances and software, modification of network traffic flow, etc..
• Assist ICS Cybersecurity Engineers or Manager with the implementation of OT/ICS cybersecurity best practices including defense-in-depth principles, principle of least privilege, IEC-62443, NIST.SP.800-82 and other applicable standards or security principles.
• Performs strategic system maintenance, including but not limited to, patching and firmware upgrades in high availability OT infrastructure to minimize downtime.
• Performs detailed resolution writeups in ticketing systems like ZenDesk, ServiceNow, etc.
• Readily available to support clients and controls engineers with issues related to industrial networks, SCADA software and industrial data centers.
• Able to be resourceful to troubleshoot and resolve problems with SCADA software and Windows/Linux operating systems.
• Able to quickly spin up development systems for proof of concept/testing.
• Understands PLC/HMI, SCADA, VFD and instrumentation functions and assist clients and controls engineer with troubleshooting.
• Works with subcontractors (electrical and telecommunication contractors) on projects including oversight of installation related to network infrastructure.
• Stays current with the latest OT/ICS cybersecurity threats, technologies and solutions.
• Proactively assists the Cyber Team in developing best practices to streamline the deployment of industrial network solutions including maintaining internal documentation and lab deployments.
• Drafting of networks layouts, OT/ICS infrastructure layouts, etc.
• Ensures projects are completed on time and on budget.
• Manages OT/ICS infrastructure projects up to $250k.
• Interacts with and manages customer expectations.
• Other functions as required by the project or team.

Minimum Qualifications

• Cisco CCNA.
• 1 year experience working with virtualize environment utilizing VMware/Promox/Microsoft Hyper-V/Nutanix.
• 2 years of experience configuring enterprise and/or industrial networks.
• 3 years of controls engineering experience programming, integrating and commissioning PLC, HMI and SCADA systems.
• Bachelor's degree in electrical engineering, mechanical engineering, chemical engineering, information technology or cybersecurity.
• Ability to multitask on multiple projects and project elements.
• Proficient with Microsoft Office Suite including Word, Excel, Outlook and Project.

Preferred Qualifications (some of the following)

• Engineer-in-Training certificate or Professional Engineer license.
• VMware VCP-CDV certificate.
• Very proficient with Microsoft Excel and Outlook as well as experience with Microsoft Project.
• Experience with AutoCAD and Microsoft Visio.
• Experience configuring, deploying and administering the following Rockwell Automation software packages: RSLogix5, RSLogix500, RSLogix5000, Studio5000, FactoryTalk View SE, FactoryTalk View ME, RSView32, FactoryTalk Batch, FactoryTalk Historian SE, FactoryTalk VantagePoint, PlantPAx, and FactoryTalk AssetCentre.
• Experience configuring, deploying and administering WonderWare System Platform components.
• Experience configuring, deploying and administering Ignition and/or Sepasoft.
• Experience troubleshooting the following networking protocols: EtherNet/IP, ControlNet, DeviceNet, Modbus RTU, Profibus PA, Profibus DP, Remote I/O (RIO), and Data Highway Plus (DH+).
• Experience configuring and deploying virtualization utilizing VMware ESXi, vCenter, Microsoft Hyper-V or Proxmox for manufacturing systems.
• Experience configuring, deploying and administering IT/OT Infrastructure, including Domain Controllers, SMTP Relay Servers, Backup Solutions, Certificate Services, etc.
• Experience conducting network vulnerability assessments in OT infrastructure.
• Experience configuring, deploying and administering Cisco/Dell/Fortinet network hardware configuration. Command Line Interface experience is most beneficial.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully preform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit for long periods of time; stand; walk; use hands to finger handle, or feel; reach with hand and arms; grasp and manipulate objects; and talk or hear. The employee may be required on occasion to climb stairs and/or ladders; kneel; stoop; crouch; and crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Work Environment

The nature of this job requires both office time and on-site time at a customer facility. Work during office time takes place in a clean, pleasant and comfortable office setting. Work during on-site time employees could encounter cold, hot, humid, noisy conditions. This position will require a minimum of 25% travel time.

TM Process & Controls, Inc. is an Equal Opportunity Employer