What Is A Process Design Engineer Jobs in Usa

Duties and Responsibilities:

• Lead the development of 3D models of complex aerospace hardware

• Prepare design concepts, sketches, layouts, technical drawings, and BOMs

• Serve as the primary technical point of contact for design-related decisions across new and existing products

• Interface with internal and external stakeholders to ensure manufacturability

• Certify technical reviews and other engineering documentation

• Lead cross-functional activities to sustain existing designs

• Manage complete implementation of engineering design change requests

• Lead resolution of technical issues during manufacturing and customer interactions

• Champion process improvement activities related to design engineering

• Support proposals and future product development

Required Skills and Abilities:

• Extensive experience as a Senior Mechanical Design Engineer, Technical Lead, or similar role

• Expertise in parametric CAD design

• Expertise in drawing ANSI standards and GD&T procedures

• Expertise in manufacturing techniques and processes

• Knowledge of material properties and selection process

• Knowledge of FMEAs and quality assurance processes

• Knowledge of relevant MIL-STD’s

• Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics

• Highly motivated self-starter

• Strong problem-solving skills

• Excellent attention to detail

• Strong verbal and written communication skills

• Capable of thriving in a fast-paced environment

Education and Experience:

• Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field

• 8+ years of progressive engineering experience

Aeonsemi is a pre-IPO chip design company at the forefront of high-speed data communication for Physical AI. Backed by tier-one venture firms and in rapid revenue growth, we design customer-proven synchronous Ethernet networking and timing solutions that address the critical needs of secure data connectivity, robust timing synchronization, and efficient energy delivery — from AI edge nodes, autonomous systems to hyperscale data centers.

Analog/mixed-signal Design Engineer

Responsibilities

You will be working with a team of designers to design high performance RF/Analog/mixed-signal circuits for high-speed wireline transceiver products using advanced CMOS technologies.

· Block level architecture design

· Schematic design, simulation, behavioral modeling, validation plan

· Supervise layout engineer and hands-on layout of critical paths when needed

· Lab characterization

Qualifications

· MS or Ph.D in electrical engineering with minimum 2 years of experience

· Knowledge of analog fundamentals: biasing circuits, clock generation and/or data converters

· Proficient in Cadence design environment

· Good communication skills

Additional Helpful Qualifications

· Proficient in Python or other programming language

. Basic proficiency with signal processing

. Interest in developing full-stack skills spanning mixed-signal design, simulation and modeling, and production test flows (software/firmware debug)

We offer

· Great team work environment with excellent career growth opportunities

· Competitive salary, attractive stock option

· Competitive benefit package with health care, dental, 401k etc.

PCBA Design Engineer

Design Custom Electronics That Power Real-World Products

Are you an electrical engineer who enjoys seeing your designs move from concept to real production hardware? This is an opportunity to join an engineering team where your ideas and technical expertise shape the products being built.

In this role, you will design custom printed circuit board assemblies used in industrial and embedded systems. Every project is unique! Meaning you won’t be stuck supporting the same product for years. Instead, you’ll work on a wide variety of applications while collaborating with other engineers and customers to develop PCB electronic solutions.

If you enjoy solving problems, working hands-on with custom boards, and taking designs from prototype through production, this role may be for you!

Why This Role?

• Work on diverse, custom projects with no repetitive product cycles
• See your designs come to life from prototype through full production
• Small engineering team where your impact is significant
• Strong mentorship and collaboration with experienced engineers
• Opportunities for advancement into senior engineering and leadership roles
• Flexible work hours and a supportive, engineering-driven culture
• Stable and growing company with long-term demand for its products

What You’ll Do:

• Design schematics and printed circuit board assemblies (PCBA) for industrial and embedded applications
• Select electronic components based on performance, lifecycle, availability, and cost
• Review and support PCB layout with attention to signal integrity, power distribution, and thermal considerations
• Collaborate with firmware and mechanical engineers to ensure successful system integration
• Support design for manufacturability, assembly, and testing (DFM / DFA / DFT)
• Create and maintain design documentation including schematics, BOMs, and test procedures
• Assist with prototype builds, bring-up, debugging, and validation testing
• Support ongoing product improvements and design updates

Qualifications:

• Bachelor’s degree in Electrical Engineering or significant PCB design experience
• 3+ years of experience designing printed circuit boards (PCB)
• Schematic design experience using Altium software is preferred
• Basic understanding of analog and digital circuit design
• Familiarity with microcontrollers, sensors, and communication interfaces
• Ability to interpret datasheets, schematics, and manufacturing documentation

Compensation & Benefits:

• Base salary: $90,000 – $115,000
• Annual performance cash bonus
• Comprehensive benefit package including all insurance and retirement
• Continuing education allowance
• Flexible work schedule options
• Team events and company gatherings
• A collaborative engineering culture where you will be supported

Apply Today!

This role offers clear paths for career advancement, including opportunities to grow into a Senior Engineer, Project Manager, and Engineering Manager.

If you have PCB Design experience, we encourage you to apply today!

Hydraulic Design Engineer

Location: Raleigh, NC

Salary: Commensurate with experience + Benefits

About the Role

Wetherill Engineering, Inc. (WEI) is seeking a Hydraulic Design Engineer to support transportation and roadway drainage projects. This role involves hydrologic and hydraulic analysis, stormwater system design, and collaborating with multidisciplinary teams to deliver high-quality solutions.

Key Responsibilities

• Design and analyze roadway drainage, stormwater management, and erosion control systems.
• Perform hydrology and hydraulic analysis for transportation projects.
• Develop plans for stormwater management systems, bridge and culvert hydraulics, and BMPs.
• Utilize MicroStation, GEOPAK Drainage, HEC-RAS, Open Roads Designer, and SUDA.
• Assist in fieldwork to verify site conditions.
• Support project coordination and provide technical direction.

What You Bring

• B.S. or M.S. in Civil Engineering (or related field).
• P.E. license preferred (or ability to obtain).
• 5+ years of transportation hydraulic design experience (NCDOT projects preferred).
• Proficiency in MicroStation, Microsoft Office, and Adobe Acrobat.
• Strong understanding of NCDOT Guidelines, FHWA Hydraulic Design Manual, and erosion control.
• Excellent communication, teamwork, and problem-solving skills.
• Experience or willingness to manage projects is a plus.

Why WEI?

• Competitive salary + health, dental, vision, life, and retirement benefits.
• ESOP, SPSF, HUB-certified firm.
• Ranked among Top MWBE Firms and Top 74 Southeast Engineering Firms (ENR).
• Supportive and collaborative work environment with growth opportunities.

Equal Opportunity Employer | No sponsorship available.

Apply on LinkedIn, at , or email for more information.

This description is not a comprehensive listing of activities, duties, or responsibilities that may be required of the employee and other duties, responsibilities, and activities may be assigned or may be changed at any time with or without notice.

About the Company

At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world’s most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide unique R&D and engineering services across all industries. Join us for a career full of opportunities. Where you can make a difference. Where no two days are the same.

About the Role

We’re seeking an Electrical Design Engineer to join our innovative team focused on building cutting-edge network security and telecommunications hardware. This is a high-impact role where you’ll contribute to the design, development, and optimization of mission-critical systems used by global enterprises.

Responsibilities

• Provide ongoing support for deployed hardware systems, ensuring reliability and performance.
• Identify opportunities for design enhancements and implement changes to improve efficiency, scalability, and manufacturability.
• Lead investigations into hardware failures, applying analytical techniques to identify and resolve root causes.
• Develop and execute test plans to validate hardware functionality, performance, and compliance with industry standards.
• Work closely with software, firmware, and mechanical engineering teams to ensure seamless integration and product success.

Qualifications

• Bachelor’s degree or higher in Electrical/Computer Engineering or a related field, with 6 years of experience in hardware design and development, ideally in network security or telecommunications.

Required Skills

• Strong foundation in analog and digital circuit design principles.
• Proficiency with schematic capture and PCB layout tools such as Altium, Cadence, or OrCAD.
• Solid understanding of signal integrity, power integrity, and thermal management.
• Hands-on experience with networking and communication protocols (e.g., TCP/IP, Ethernet, VPN).
• Hands-on experiences with High-speed design validation and circuit debugging.
• Demonstrates strong problem-solving skills and keen attention to detail, with the ability to clearly communicate complex technical concepts to diverse audiences through both written and verbal channels.

Pay range and compensation package

The base compensation range for this role in the posted location is $58,900 to $130,000.

Equal Opportunity Statement

We are committed to diversity and inclusivity.

BUILT TO CONNECT

Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world.

ABOUT THE POSITION

Under general supervision of the Engineering Director/Manager, the job of the Hydraulic Design Engineer is responsible for design efforts from inception through production in new product development or existing product design.

The Hydraulic Design Engineer will work in collaboration with other engineers, cross-functional teams not limited to sales, manufacturing, purchasing, and service. They will develop conceptual and final design solutions manage and coordinate project activities, support existing product offerings, and perform testing or analysis of new and existing products to further Astec’s product line development goals.

This Hydraulic Design Engineer’s scope of work will focus on Hydraulically Controlled equipment such as track screening and crushing, mobile mining, portables, asphalt milling and paving, track and mobile and forestry, and stationary equipment.

The preferred work location is Yankton SD.

Deliverables and Responsibilities:

· Perform hydraulic design engineering as it relates to Astec product development and improvement projects.

· Effectively use 3-D CAD to model designs and use other engineering tools like Automation Studio to optimize solutions

· Create, check and maintain thorough engineering specifications and drawings

· Manage engineering changes per establish company procedures

· Interact with production personnel to define and solve manufacturing and/or design issues and implement cost reduction ideas with regards to the product

· Use root cause analysis and other problem-solving skills to determine opportunities to improve products and implement corrective actions.

· Responsible for achieving due dates and pre-defined requirements defined by management

· Be a technical resource as needed to support other departmental needs such as operations, quality, purchasing, service, et cetera

To be successful in this role, your experience and competencies are:

· Minimum of bachelor’s degree in Mechanical, Agriculture, Mechatronics, Industrial Engineering or related field

• · Minimum 5 years’ experience in equipment design and manufacturing (mechanical, structural, hydraulic and electrical/control system design)
• · Ability to work positively and productively both individually and with cross-functional teams, customers, and vendors.
• · Good organization and time-management skills with ability to adjust to sudden changes in project/priority and manage multiple tasks
• · Ability to exercise discretion and independent judgment on a customary and regular basis

· Effectively work with sketches, marked-up prints and verbal instructions to drive concept to solution

· Ability to independently create & validate hydraulic circuits using simulation software such as Automation Studio.

· Demonstrate technical and written skills to document ideas, designs and concepts

· Ability to create and maintain complex hydraulic schematics.

· Ability to interpret customer drawings, specification drawings, and other applicable specifications to determine requirement and/or feasibility of component

· Develop design concepts to meet required cost objectives including involvement with supply chain operations to provide technical information for the selection of components.

· Ability to develop and/or guide necessary computations such as load development, stress analysis, performance measurement, hydraulic circuit analysis, costing, etc. and interpret the results as necessary

· Ability to lead DFMEA’s.

· Researches industry standards to stay abreast of latest applicable requirements. Performs GAP analysis on standards.

• · Proficient with personal computing, Microsoft Office Suite, 3-D CAD software applications (SolidWorks preferred) and ERP systems (Oracle preferred)
• · Document assigned tasks as required

Travel Requirements: May be asked to travel to develop business relationships with customers, dealers, and suppliers as well as visit other sites to participate in special projects. Our Culture and Values

Employees that become part of Astec embody the values below throughout their work.

• · Continuous devotion to meeting the needs of our customers
• · Honesty and integrity in all aspects of business
• · Respect for all individuals
• · Preserving entrepreneurial spirit and innovation
• · Safety, quality and productivity as means to ensure success

WORK ENVIRONMENT

The Hydraulic Design Engineer will work in multiple environments including those listed below.

Office

While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Manufacturing Environment

Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EQUAL OPPORTUNITY EMPLOYER

As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Sales Design Engineer – CEA (Controlled Environment Agriculture)

Role Overview

The Sales Design Engineer for CEA plays a critical role at the intersection of sales, engineering, and customer solutions. This position supports the sales process by translating customer needs into technically sound, well-designed CEA systems, while helping ensure feasibility, accuracy, and alignment between sales commitments and execution.

This role partners closely with Sales, Engineering, and Operations to develop conceptual designs, validate system requirements, and support proposals for CEA projects.

Key Responsibilities

• Support the sales team by developing conceptual and preliminary CEA system designs based on customer requirements
• Translate customer goals into technical layouts, system concepts, and solution narratives
• Assist with technical scoping, system feasibility, and early-stage design considerations during the sales process
• Collaborate with internal teams to ensure designs align with engineering standards, cost assumptions, and operational capabilities
• Provide technical input for proposals, presentations, and sales documentation
• Participate in customer discussions as a technical resource when appropriate
• Identify risks, constraints, or design considerations early in the sales cycle to support accurate selling

Training & Development

This role will receive hands-on training and mentorship from senior leadership and subject-matter experts within the organization. The individual will learn directly from seasoned leaders with deep technical and operational expertise, providing a unique opportunity to be trained by the best of the best during onboarding, our President!

Qualifications (Initial)

• Bachelor’s degree in engineering required
• Background in engineering, design, or a technical discipline (or equivalent practical experience)
• Experience with CEA systems, greenhouse design, or related agricultural or industrial systems required
• AutoCAD or Visio experience
• Knowledge of Project Management processes
• Ability to communicate technical concepts clearly to non-technical audiences
• Strong collaboration skills and comfort working cross-functionally
• Detail-oriented, with the ability to think both conceptually and systemically

Success in This Role Looks Like

• Sales opportunities are supported with clear, credible technical designs
• Fewer disconnects between what is sold and what is built
• Strong collaboration and trust between Sales, Engineering, and Operations
• Customers feel confident in the technical solution being proposed

Job Title: Medical Device Packaging Design Engineer

Location: On-site in Huntley, IL

Position Brief:

The Chatham Group Advanced Materials and Technologies Recruiting Team is seeking highly qualified candidates for a Medical Device Packaging Design Engineer for a client in the specialty packaging technology industry. This is a mid-junior level position that requires hands-on experience with rigid thermoformed packaging design concepts with experience in medical device packaging and sterile polymer barrier systems. You will work closely with the manufacturing engineering and quality assurance teams to deliver compliant and production ready packaging solutions for new and existing products.

Responsibilities:

• Design medical device packaging systems from initial concept through testing and production using CAD programs, particularly SolidWorks
• Use CAD programs to develop 3D models and assemblies as well as 2D drawings for specification
• Evaluate various polymeric materials such as PET, HIPS, Polypropylene, etc for their performance properties such as wall thickness, strength, rigidity, sterilization, and more
• Create prototype products using existing tooling or 3D printing technologies and conduct feasibility reviews for functional integrity, stackability, etc
• Lead the IQ/OQ/PQ product validation process and comply with ISO 13485 standards for medical device quality
• Manage ISO 11607-1 and ISO 11607-2 compliance process for medical device packaging sterilization

Requirements:

• BS in Packaging Engineering, Packaging Science, or Mechanical Engineering
• 4-5 years of experience in packaging design with ideally around 2 years of experience in medical device packaging
• High proficiency with CAD programs, particularly SolidWorks
• Working knowledge of thin-gauge thermoformed packing design
• Understanding of medical packaging standards, sterilization techniques, etc
• Experience with clean room manufacturing environments

Compensation will be commensurate with experience and relocation may be provided to qualified candidates.

Job Title:       Design Engineer II

Department:    Product Development

Reporting to:    Engineering Division Manager

SUMMARY: 

Design Engineer II is responsible for the design, development, and implementation of new manufactured products and proprietary equipment as well as improvement to existing products.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Originates and/or develops product designs relating to defined customer needs as well as proprietary products in new to market applications; collaborates with Sales and Management to develop new business opportunities. 
• Utilizes conventional engineering principles to provide comprehensive engineering studies of components, weldments and assemblies suited to meet detailed product performance specifications. 
• Identifies, evaluates, and recommends materials and production processes to optimize product performance and manufacturing efficiency.
• Plans and directs product testing requirements, if not previously specified by the customer.
• Perform design for manufacturability reviews, Bill of Material management, and cost evaluations.
• Provide engineering support to Manufacturing, Purchasing, Sales, Marketing, and Management Teams.
• Maintain detailed management of engineering documents, designs, evaluations, and related materials.
• Coordinate with Production and Operations teams to ensure the timely completion of development projects.
• Other responsibilities as assigned.

EDUCATION AND/OR EXPERIENCE:

• B.S. in Mechanical Engineering or related field
• Proficient creating parts, assemblies, and drawings with design software i.e. SolidWorks, Inventor, AutoCAD
• 4 or more years of Engineering experience in a manufacturing environment.
• Prior experience with ERP management software is required.
• Experience working in welding, sheet metal fabrication, hydraulics or plastics molding is preferred.

OTHER ESSENTIAL SKILLS AND ABILITIES:

• Project Management - Prioritizes and plans work activities efficiently; sets goals and objectives while developing realistic action plans to achieve targets; able to work independently as well as in a team environment. 
• Displays original thinking and creativity, strong problem-solving capabilities.
• Analytical and Diagnostic Skills - Methodical in solving problems backed by accurate data and analysis of findings.
• Communication - Speaks clearly and concisely; listens and requests clarification when needed; takes direction well.
• Must be proficient with Microsoft Word, Excel, and Outlook
• Willingness to participate in hands-on work in a Manufacturing Environment.

PHYSICAL DEMANDS:

Position requires the ability to react, move about, install, remove, replace, and lift objects up to 50 lbs. Must be able to exchange information verbally, detect and observe situations, and work with others. Position may require the use of automobiles, ATV’s, test equipment, mechanical and electrical devices, tools, and computers. At times you will be required to wear Personal Protective Equipment when entering production areas and working near moving equipment and machinery. May be exposed to noise, dust, and cold/hot temperatures when working in production or prototype areas. 

WORKING CONDITIONS:

Work is generally performed in an office environment with some time spent in production environments. The essential duties and responsibilities, knowledge, skills, abilities, physical demands, and work environment are representative of those that must be met and performed satisfactorily or will be encountered with this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.