Tvheadend Docker Install Jobs in Usa

Must haves:

• Electrical apprenticeship or formal training in electrical installation techniques.
• Demonstrated ability to read and interpret drawings.
• Possesses working knowledge of local codes as it applies to controls.
• Experienced in scope determination of installation materials. Able to work independently.
• Four years’ experience directly with controls installations.

Day to day:

Under general supervision, performs installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis. Works with electrical contractors as required. Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.

• Installs raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.
• Mounts and terminates controls equipment as needed.
• May assist sales with electrical estimates, including walking retrofit projects.
• Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).
• Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).
• Keeps management informed of job needs, progress and issues.
• Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to Engineering on changes and keeps as-built drawings current.
• Resolve job site conflicts regarding installation issues or escalates concerns to management as required.
• Communicates with the customer as necessary upon arrival and before leaving the work site.
• Adheres to safety programs and policies.
• Performs other related duties as assigned.

This position requires the ability to travel out of town as needed for various job sites.

1. Must be fully qualified and capable of working directly with project management to understand and evaluate scheduled electrical work needed to complete projects in a timely manner.
2. Must be capable of performing all duties associated with the crew lead position and in addition. 
3. Must be able to self-prepare for all scopes of electrical work needed by evaluating pictures from site assessment and communicating directly with the project management and design team about any necessary changes or improvements to the electrical plan set. These changes must be documented and sent to the project management team. 
4. Must maintain tools and materials needed to “adapt and overcome” any challenges in the field including utility shutdowns. 
5. Must be capable of communicating at a high level with city inspectors. 
6. Must maintain a 90% or higher pass rate on all electrical equipment wall installations and maintain less than 10% of service calls generated by installation-related quality issues. 
7. Must be capable of cross-training and crew development when assigned to supervise and support solar installation crews, allowing roof crew leads to self-perform installations while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process. 
8. Must be capable of supervising the crew while the electrical apprentice ( roof lead or other designated person by management) gets to experience electrical wall installation and service upgrades. 
9. Must have required personal tools of the trade, see “minimum required personal tools of the trade”.
10. During the first 90 days you will be required to learn how to install Tesla Powerwall coupled with Enphase solar systems. 
11. We will be looking to you to run your own crew with a helper installing power walls and solar systems. By the end of the 90 days, you will be required to take a proficiency test. This test will include you installing a complete battery and solar system without the help of the lead electrician at Good Faith Energy. 
12. You must pass this test to be a lead electrician for Good Faith Energy.
13. We will provide you with all the on-the-job training as well as classroom materials to advance your knowledge of the systems you will be installing.
14. Attends all meetings and conference calls.
15. Performs consistently with company core values
16. Maintains strict confidentiality.
17. Provides excellent customer service, for both internal and external customers.
18. Follows all OSHA and other safety guidelines. 
19. Actively demonstrates teamwork at all times.
20. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period.
21. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period.

Introduction:

We are a Privately-Owned Solar Services firm, focusing exclusively on the development of industry-leading solutions. We develop, design, and sell new products that are highly efficient and custom installation solutions that enhance the overall adoption of solar.

The Technical Support Specialist I provides technical support for customers, installers, and internal teams related to solar racking system design and installation. This role focuses on learning products, processes, and field practices while supporting commercial and utility scale ground mount solar projects under the guidance of senior team members.

The position assists with technical inquiries, documentation, and project support while developing core knowledge of site conditions, environmental loads, and installation constraints.

Key Responsibilities

Technical & Customer Support

• Assist in responding to customer and internal technical inquiries related to solar racking systems and installation methods.

• Support troubleshooting of common installation and constructability questions under supervision.

• Escalate complex or project specific issues to senior technical staff or Engineering as required.

Design & Documentation Support

• Review and interpret basic engineering drawings, layouts, and installation manuals with guidance.

• Assist in confirming product compatibility based on general site conditions and documented standards.

• Support maintenance of technical documentation, FAQs, and internal knowledge bases.

Field & Installation Awareness

• Learn standard installation practices and common field challenges for ground mount racking systems.

• Review site photos and installer feedback to help identify potential concerns related to terrain or soil conditions.

• Participate in site visits, training sessions, or inspections for learning purposes as needed.

Systems & Process

• Enter and maintain accurate technical records in CRM and document control systems.

• Track support requests and follow established workflows and SOPs.

• Develop familiarity with internal tools, processes, and cross functional communication.

Required Skills & Qualifications

• 0–2 years of experience in solar, construction, engineering support, or a related technical field (internships acceptable).

• Basic understanding of solar PV systems and ground mount racking concepts.

• Ability to read and understand technical drawings at a foundational level.

• Awareness of environmental factors affecting installations (soil conditions, wind, snow, corrosion).

• Proficiency with Microsoft Office (Excel, Word, Outlook, Teams).

• Strong willingness to learn technical products, standards, and processes.

• Strong communication skills and attention to detail.

• Ability to work collaboratively in a team based environment.

Preferred Skills & Qualifications

• Exposure to solar installation, field support, or construction environments.

• Coursework or degree in Engineering, Construction Management, Renewable Energy, or related field.

• Basic familiarity with CRM systems or technical documentation tools.

• Interest in pursuing NABCEP or other relevant certifications.

Our Core Values:

We want a problem solver to interact ambitiously with our business and not just accomplish a task.

The ideal individual will align well with our Core Values:

o Trust

o Excellence

o Accountability

o Collaboration

o Service

o Innovation

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.  

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Installation includes mounting wiring connecting testing configuring and programming instruments and devices.
• Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center.
• Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc.
• Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities.
• Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets.
• Ensures regulatory and compliance standards are met.

• Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.

• Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
• Ability to lead project teams, assume project supervisor role and develop action plans.
• Knowledge of Natural Gas and Electric Driven Gas Compressors.
• Knowledge of Gas and Fire Detection Systems
• Knowledge of Emergency Shut Down (ESD) Systems.

• Ability to interpret control system software for the purpose of diagnostic troubleshooting.
• Ability to pass electrical, electronic, and digital equipment troubleshooting tests.
• Ability to troubleshoot electrical, electronic, and pneumatic equipment.
• Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams.
• Ability to define specifications and requisition instrumentation and control equipment.
• Ability to define problems, collect data and draw conclusions.
• Ability to work independently and as a team member.
• Ability to communicate effectively and develop rapport.
• Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.)
• Ability to operate personal computer.
• Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems
• Knowledge of electric driven compressors may be required.
• Knowledge of electrical and electronic theory and principles
• Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same.
• Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS)
• Knowledge of Variable Frequency Drives (VFD)
• Knowledge of Human Machine Interface (HMI)
• Knowledge of Ethernet Communications Equipment
• Knowledge of Valves and Positioners
• Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards
• Knowledge of applicable regulatory requirements

• Knowledge of electronic, radio, digital, and remote-control theory.
• Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.)
• Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain.
• Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints.
• Ability to prepare technical reports and repair and maintenance records.
• Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations.
• Ability to directs and participates in installation of telecommunications equipment.
• Ability to interpret and implement gas measurement and SCADA device installation specifications.
• Ability to performs design programming installation and operation of electronic gas measurement and control systems.
• Inspects and tests facilities and equipment to identify malfunctions.
• Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment.
• Ensures installations and equipment comply with regulations.
• Ability to supervise MC&C projects.
• Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities

• Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.)

• Electronics & Communications Engineering

• ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months)

• Contribute to a team-centric work environment based on mutual respect and integrity
• Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers

Compensation details: 32.26-46.39

PIa35bdf77f43e-37344-40004115

Lead Security Technician

Location: Charleston, SC

Schedule: Full-time (typical construction hours; may vary by project)

Position Overview

We are seeking an experienced Lead Security Technician to support commercial security system installations across projects in the Charleston, SC area. This is a hands-on leadership role responsible for overseeing field crews, ensuring high-quality installations, and coordinating with project stakeholders to deliver successful security system deployments.

The ideal candidate brings strong experience in access control, CCTV, intrusion systems, door hardware, and structured cabling, along with the ability to lead teams and maintain professional jobsite standards.

Key Responsibilities

Field Leadership

• Lead and supervise installation teams on active job sites
• Assign daily tasks and ensure productivity and quality standards are met
• Serve as the primary point of contact between field teams and project leadership
• Maintain jobsite organization, safety compliance, and workflow efficiency

Security System Installation

• Install, terminate, and troubleshoot:
• Access control systems
• CCTV / IP camera systems
• Intrusion detection systems
• Install and wire door hardware including:
• Electric strikes
• Maglocks
• Door contacts
• Request-to-exit (REX) devices
• Card readers and keypads

Cabling & Infrastructure

• Pull, route, terminate, and test:
• Cat5e / Cat6 / Cat6A
• Composite access control cable
• Coax and low-voltage cabling
• Perform clean cable dressing, labeling, and pathway management
• Build and wire panels, enclosures, and head-end equipment

System Integration & Testing

• Assist with panel terminations and device integrations
• Support system testing, commissioning, and troubleshooting
• Ensure all installations meet project specifications and code requirements

Documentation & Communication

• Read and interpret blueprints, riser diagrams, and scopes of work
• Provide daily progress updates to project managers or supervisors
• Track materials, report issues, and coordinate solutions in real time

Required Experience

• 5+ years of experience in low-voltage / security system installation
• Proven leadership experience as a Lead Technician or Foreman
• Strong background in:
• Access control systems
• CCTV / surveillance systems
• Structured cabling and terminations
• Door hardware installation

Preferred System & Brand Experience

Experience with one or more of the following platforms is highly preferred:

• Access Control: Lenel, LenelS2, Software House (CCURE), Genetec, Avigilon, Brivo, AMAG, Honeywell, Openpath
• CCTV / VMS: Avigilon, Genetec, Milestone, Hanwha (Wisenet), Axis
• Intrusion Systems: Bosch, Honeywell, DSC, DMP

Technical Skills

• Strong understanding of low-voltage wiring and system architecture
• Experience with panel wiring and device integration
• Ability to troubleshoot systems independently
• Proficient in reading prints and executing scopes with precision

Requirements

• Valid driver’s license and reliable transportation
• Ability to pass background check (required for secured sites)
• OSHA 10 (preferred but not required)
• Ability to lift 50+ lbs, climb ladders, and work in construction environments

Tools & PPE

• Must have own basic hand tools (termination tools, drills, testers, etc.)

Tidewater Staffing is currently seeking Outside Machinists for work in various local shipyards including locations of Newport News, VA, Norfolk, VA, and Portsmouth, VA.
The Outside Machinist must possess knowledge, skills, and abilities to perform job operations/tasks on conventional and nuclear ships and submarines. The Outside Machinist must be assignable to any work center excluding nuclear and subsafe machinery.
The following is a list of typical work that an Outside Machinist might be asked to perform:

• 
  
• Remove, repair, overhaul, install and align main propulsion machinery and associated equipment/components. Also remove, repair, overhaul, install, and align equipment associated with auxiliary systems such as condensers, compressors, pumps, forced draft blowers, main feed pumps, various types of valves, cargo handling machinery, anchor handling gear, boat davits, cranes, elevators, conveyors, firefighting equipment, machine shop equipment, galley, and laundry equipment.
  
• Install and repair foundations for operating machinery and principal structures/components of the ships armament.
  
• Install, adjust, set, and repair or replaces various control/regulating or safety devices such as meters, gauges, valves, governors, and automatic alarms. Test or assist in the testing of shipboard machinery pier side or on sea trials to prove satisfactory operation and acceptance.
  
• Use various portable and fixed machine tools such as boring bars, milling machines, facing machines, and drill presses. Use precision measuring instruments such as height gages, depth gages, calipers, verniers, and various types of micrometers, and assists in the use of optical equipment.
  
• Coordinate and arrange for the work of several trades in connection with performing work from information received from technical work documents, blueprints, specifications, and written and/or oral instructions.
  
• Engineer, steam, machinist, installation, marine erector, marine machinist, outfitter, outside-installation machinist Installs ship machinery, for example, propelling machinery, auxiliary motors, pumps, ventilating equipment, and steering gear, working from blueprints and using hand tools, calipers, and micrometers.
  
• Lays out passage holes on bulkheads, decks, and other surfaces for connections, for example shafting and steam lines.
  
• Installs below-deck auxiliaries, for example, evaporators, stills, heaters, pumps, condensers, and boilers, and connects them to steampipe systems.
  
• Tests and inspects installed machinery and equipment during dock and sea trials.
  
• May also set up and operate such machine shop tools as lathe, boring mill, planer, shaper, slotter, and milling machine to fabricate replacement parts.
  

NOW HIRING: Field Operations Manager | $100,000–$125,000+ Earning Potential Climate Experts — Melbourne, FL | Locally Owned & Growing Fast

Are you an experienced trades leader ready to run a multi-department operation and be rewarded for results? Climate Experts is looking for a Field Operations Manager to lead our HVAC, Plumbing, and Electrical teams — and we pay top dollar for the right person.

$70,000–$80,000 base salary (based on experience)  Monthly performance bonuses — total earning potential $100,000–$125,000+  Take-home company vehicle  Full benefits: Health, Dental & Vision  401(k) retirement plan  Locally owned — you'll have a real voice here

ABOUT CLIMATE EXPERTS

Climate Experts is a fast-growing, family-owned home services company serving Brevard County and surrounding areas. We deliver a world-class customer experience in HVAC, plumbing, and electrical services. As we continue to expand, we need a driven leader to take ownership of our field operations and help us scale to the next level.

THE ROLE

This is a high-impact position for an experienced trades professional ready to lead at the highest level. You'll oversee our HVAC Sales & Install, Plumbing Service & Install, and Electrical Service & Install departments — managing technicians, installers, project managers, and apprentices across all three trades. You are the key driver of field performance, quality, and culture.

WHAT YOU'LL OWN

HVAC Sales

• Lead and coach Project Managers to drive close rates and hit sales targets
• Review all estimates and build sheets for accuracy before equipment is ordered
• Maintain gross profit margins and hold the team to quality standards

Plumbing — Service & Install

• Manage plumbing technicians across service and installation
• Monitor close rates, callbacks, and ensure repair options are presented on every call
• Set up install crews and manage installation checklists
• Drive team performance through ride-alongs, coaching, and accountability

Electrical — Service & Install

• Oversee electrical service and installation teams
• Ensure technicians are running calls properly and representing the company at a high standard
• Coordinate with dispatch to get the right tech on the right job

Team Leadership & Development

• Run daily huddles and set the tone for the day
• Conduct weekly training sessions and bi-weekly 1-on-1s with direct reports
• Build and manage performance reviews, 90-day evaluations, and career progression plans
• Coach techs and installers in real-time through ride-alongs and job visits
• Manage apprentice training programs including EPA and NATE certification prep

WHAT WE OFFER

• $70,000–$80,000 base salary (based on experience)
• Monthly performance bonus — total comp $100,000–$125,000+ for the right performer
• Take-home company vehicle or gas card
• Health, Dental & Vision insurance
• 401(k) retirement plan
• Paid time off
• Company expense card
• Nexstar coaching and leadership development investment
• A culture built on accountability, growth, and doing right by the customer

WHAT WE'RE LOOKING FOR

• 5+ years of management experience in trades, sales, or field operations
• Proven track record leading teams in a field services environment
• Service Titan experience is a strong plus
• Exceptional communication, coaching, and leadership skills
• Valid driver's license with a clean driving record
• Local to Brevard or Indian River County
• Someone who takes ownership, holds standards high, and leads by example

SCHEDULE

Monday–Friday, 7:00 AM–4:00 PM in office/field Phone availability weekdays 4:00–9:00 PM and on weekends for field team support

If you are the kind of leader who thrives on results, loves developing people, and wants to be rewarded for what you build — we want to hear from you.

• Apply now or send your resume to: