Tvheadend Docker Install Jobs in Usa

Facilities and Business Operations:

The Facilities and Business Operations at UCF is dedicated to fostering a conducive educational environment for our faculty, staff, students, and the broader community. We are committed to excellence, providing unparalleled expertise, and maintaining a world-class standard in service.

Please visit us at: or Facebook and Instagram: UCF Facilities

The Opportunity:

The Facilities Operations Landscape department within Facilities and Business Operations is looking for a Landscaper II to join their team! This will be a member of the Landscape Operations Projects team responsible for skilled installation and renovation of campus landscapes.

Responsibilities:

• 
  

• Support the Landscape Operations Projects Team by assisting with planning, coordinating, and executing landscape installation projects across campus.

  
  

• Perform site preparation and install, transplant, or remove trees, shrubs, groundcover, and other landscape materials.

  
  

• Assist the Hardscape Team with concrete removal and repairs, paver walkway work, pothole patching, and other small hardscape projects.

  
  

• Provide support to the Urban Forestry team, including pruning, tree removals, stump grinding, and related tasks.

  
  

• Remove, repair, and install site furnishings such as benches, trash receptacles, and other outdoor fixtures.

  
  

• Coordinate project handoffs by identifying maintenance needs and providing sitespecific recommendations to maintenance crews.

  
  

• Operate landscape and construction equipment safely and effectively as needed for project work.

  
  

• Perform other duties as assigned in support of landscape operations.

  
  

Minimum Qualifications:

Completion of 9th grade and 2+ years of relevant experience or an equivalent combinationof education and experience pursuant to Fla. Stat. 112.219(6).

Preferred Qualifications:

• 
  

• 3+ years of landscape experience in a commercial or corporate environment, including installation, renovation, or multiphase outdoor project work.

  
  

• Experience operating equipment such as skid steers, stump grinders, chainsaws, compactors, trenchers, or similar tools.

  
  

• Familiarity with identifying plant materials and understanding proper planting techniques.

  
  

• Knowledge of hardscape practices, including concrete repair, paver installation, or sitefurnishing installation.

  
  

• Experience assisting with tree work (urban forestry), such as pruning, removals, or stump grinding.

  
  

• Ability to work in extreme environments and collaborate with individuals from various backgrounds and experiences.

  
  

The most successful candidates may possess the following qualities:

• 
  

• Knowledge of proper maintenance of equipment: Cleaning, preserving finishes, checking fluid levels, and lubricating.

  
  

• Basic computer skills, including email.

  
  

• Basic communication skills in English in order to: Work effectively with customers; Operate and demonstrate the functions of the electronic equipment; Utilize telecommunication devices.

  
  

Health Assessment Required:

The UCF policy requires completion and passing of a physical exam for this position.

Special Instructions to the Applicants:

New hires selected for this position at the University of Central Florida can expect to be offered the base salary amount for the role. Compensation is determined in alignment with UCF's pay structure and internal equity considerations.

Position requires a valid Class E driver's license. This position may involve driving to various locations on and off campus to conduct University business.

Applicant must be authorized to work for any U.S. employer, as sponsorship is not available for this position now or in the future.

Are you ready to unleash YOUR potential?

As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation, you'll play an integral role at one of the most impactful universities in the country. You'll be met with opportunities to connect and collaborate with talented faculty, staff, and students across 12 colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow, you'll work alongside talented colleagues on complex projects that will challenge you and help you gain new skills, and you'll have countless rewarding experiences that go well beyond a paycheck.

Working at UCF has its perks!UCF offers:

• 
  

• Benefit packages, including Medical, Dental, Vision, Life Insurance, Flexible Spending, and Employee Assistance Program

  
  

• Paid time off, including annual and sick time off and paid holidays

  
  

• Retirement savings options

  
  

• Employee discounts, including tickets to many Orlando attractions

  
  

• Education assistance

  
  

• And more...For more benefits information, view the UCF Employee Benefits Guide.

  
  

Dive into our Total Rewards Calculator to discover the diverse selection available to you, giving you a glimpse into the benefits that together shape your comprehensive rewards package at UCF.

Unless explicitly stated on the job posting, it is UCF's expectation that an employee of UCF will reside in Florida as of the date the employment begins.

Department

Work Schedule

Type of Appointment

Expected Salary

Job Posting End Date

Veteran's Preference:

Preference will be given to eligible veterans and their eligible spouses in accordance with Chapter 295 of the Florida Statutes. Applicants claiming preference are responsible for providing required documentation by the closing date of the position. For more information on Veterans' Preference, please visit

As a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.

UCF is proud to be a smoke-free campus and an E-Verify employer.

If an accommodation due to a disability is needed to apply for this position, please call or email .

For general application or posting questions, please email .

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

Michelin Beyond Road Junction City, KS - AG Track Manufacturing Leader

This opportunity is in Junction City, KS Agricultural Track facility, located between Salina and Manhattan in the heart of Northeastern, KS. With the current expansion we will be one of the best automated and tech savvy facilities in the region, serving the ever-growing agriculture industry. 15 minutes away from Manhattan, home to the K-State Wildcats, there is a mix of downtown life, multiple outdoor hiking and lake activities, great places to eat, and college game day events to attend. Are you looking for an exciting career and not just a job? Come join our growing team

THE OPPORTUNITY

This Engineer will be responsible for completing the Mechanical Engineering portion of projects in support of the Plant Capital Project execution. They will also provide daily Plant Technical support, enabling the Plant to meet its Safety, Market, Productivity, and Quality goals. They will assist management with pre-studies of deployment and development projects in the M.E. field. They will also complete design studies, follow procurement and fabrication of equipment and lead the installation, commissioning and startup of the equipment in an industrial plant environment. For customer projects, manages the design studies for industrial equipment installations that are necessary for the success of the Plant's capital projects. She / he will ensure adherence to the customer's specifications, local regulations, compliance of performance, and costs.

WHAT WILL YOU DO

* Conduct feasibility studies of functional specifications; evaluate solutions against the criteria of cost, landmarks, risks, and functionality.

* Adhere to the quality system and established methods (risk analyses, FMEA, design reviews, quality planning, treatment of non-Conformities, etc.).

* Acquire validation of projects during the installation, start-up and ramp-up of the equipment in collaboration with team members.

* Facilitate procurement, factory acceptance tests, and maintain "as built" folders for assigned material and equipment projects.

* Provide project support, especially during installation. Start-up and ramp up phases, are often "on-site" and "hands on", and several projects include implementation schedules during planning site downtime.

* Create budget estimates and bid packages on assigned projects.

* Provide project documentation: mechanical designs, technical offer, safety risk assessment, quality risk assessments, maintenance & operator training documents and user manuals.

* Lead mechanical contractors or maintenance installation teams during equipment modifications & machine installations through start-up and commissioning.

* Provide project support, especially during installation, start-up and ramp up phases, is often "on-site" and "hands on", and many projects include implementation schedules during holidays and shutdowns.

WHAT WILL YOU BRING

* Bachelor of Science in Mechanical Engineering.

* Strong leadership, communication, organizational, customer service skills, and ability to work in a collaborative team environment.

* Self-motivation with a high degree of integrity and able to perform job duties with minimal direction on a timely basis.

* Ability to successfully lead multiple projects

* Experience with mechanical design standards; OSHA, ASME, ANSI, ISO, etc.

* Proven knowledge of SOLIDWORKS and Microsoft office

* Project Management experience preferred

#LI-RM1

#LI-HIRINGMICHELIN

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

Position Title: Assistant Electrical Superintendent

Reports To: Electrical Superintendent

Position Summary: The Assistant Electrical Superintendent executes the day-to-day operations within the electrical department as directed by the Electrical Superintendent. Responsible for safety, quality, schedule and budget of all assigned work. Assists in the planning, managing, and execution of electrical projects and repairs in production with applicable departments, personnel, and customers. Assist in the department’s development in trade skills and workmanship. Assist in organizing and managing the primary duties of the Marine Electrician which include the installation, test, and repair or marine cables and equipment, installation and connection of lighting, electrical power, troubleshooting and repair of shipboard and facilities electrical systems. Must be able to read blueprints, drawings, and schematics.

Pacific Shipyards International, LLC Expectations of Employee:

• Is committed to the company values and adheres to all Pacific Shipyards’ policies and procedures
• Perform duties of his/her job and as assigned by Management
• Maintain a positive and respectful attitude and conduct her/himself with integrity and in a polite, professional manner treating customers and co-workers courteously and respectfully
• Communicates regularly with Officers, Managers, & Supervisors about the different divisions and department’s issues
• Consistently be on time for work, meetings, and appointments and deliver work projects by assigned due dates
• Maintain assigned work areas in a clean and orderly fashion
• Maintain and ensure the safety of all assigned equipment
• Perform all duties in conformance to appropriate safety and security standards
• Meet productivity goals and quality standards as set by management
• Ability to handle multiple tasks and balance priorities
• Computer proficiency in Microsoft Office

Essential Duties & Responsibilities:

• Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes
• Connect wires to circuit breakers, transformers, or other components
• Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of the system
• Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps
• Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes
• Prepare sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes
• Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem
• Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures
• Advise management on whether continued operation of equipment could be hazardous
• Maintain current electrician's license or identification card to meet governmental regulations
• Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes
• Direct or train workers to install, maintain, or repair electrical wiring, equipment, or fixtures
• Repair or replace wiring, equipment, or fixtures, using hand tools or power tools
• Install ground leads and connect power cables to equipment, such as motors
• Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools
• Perform business management duties, such as maintaining records or files, preparing reports, or ordering supplies or equipment
• Fasten small metal or plastic boxes to walls to house electrical switches or outlets
• Construct or fabricate parts, using hand tools, according to specifications
• Perform physically demanding tasks, such as digging trenches to lay conduit or moving or lifting heavy objects
• Provide assistance during emergencies by operating floodlights or generators, placing flares, or driving needed vehicles
• Provide preliminary sketches or cost estimates for materials or services

Education/Training:

• 3 years or more in the Marine Electrical field
• Experience with US Navy Ship repair/NAVSEA regulation is required
• BS Electrical engineering degree
• Heavy Civil construction experience
• PLC and VFD experience A MUST
• Working knowledge of IT as it relates to electrical controls
• Ability to multi-task, prioritize and handle deadlines
• Ability to troubleshoot electrical systems;
• Extensive knowledge of MS Office and AutoCAD
• Ability to use Microsoft Product such as Word, excel, and adobe
• Excellent verbal and written communication skills

Qualification/Requirement:

• Must show proof of your legal right to work in the United States
• This position requires US Citizenship due to security clearance required for base access
• Must be able to successfully obtain a Transportation Worker Identification Credential (TWIC)
• Must be able to successfully obtain a Defense Biometric Identification System (DBIDS) Credential to gain access to federally controlled work sites
• All candidates must submit to and pass a post -offer drug screening and background check before employment begins. Failure to complete any of these steps will result in disqualification
• Valid State of Hawaii REAL ID-Compliant Drivers’ License in good standing, Class 3 or higher or a valid U.S. Passport in addition to a valid Hawaii Driver’s License, if you do not have a REAL ID-Compliant Driver’s License.
• Candidates must have access to reliable transportation to get to work and other job sites on time for the start of shift

One Goal, One Passion - Growth is Everything at Window Nation

Recruiting the best talent is one of Window Nation's main goals. With growth always being our number one priority, we're committed to finding and keeping the best employees possible. We want you to be your authentic self, we want you to love what you do, we want you to grow with us. Grow professionally and grow personally. We know that we all grow together at Window Nation, and we are proud of that. One Goal, One Passion - Growth is Everything at Window Nation.

Reporting to the Regional Director, Installation Services, our Operations Manager, Installation Services oversees the entirety of their branch’s installation program. The Operations Manager is responsible for the overall operations of the branch installation process. This includes overseeing the profitability, pipeline management, inventory efficiency, expense control, staff development as well as hyper focus on the customer experience. 

The ideal candidate will have an ability to create and maintain an efficient system of operation to support the business’s growth strategy. The candidate should be comfortable multitasking and working cross-functionally with different business functions. The ideal candidate will have previous experience in related fields. 

What We Offer:

: Competitive pay and bonus opportunities

: Full benefits package including medical, dental, vision, life, and 401(k) retirement options

: Paid time off

: Growth opportunities within a rapidly expanding company

: A supportive team culture where your contributions matter

Why NewSouth Window Solutions?

At NewSouth, we know that when our people grow, our company grows. We’re committed to helping you build a rewarding career while being part of a team that values hard work, reliability, and collaboration.

We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

#INDNSW

We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us

Window Nation cultivates a culture of inclusion that respects our employees' individual strengths, views, and experiences. We believe our differences make us a better team – one that makes good decisions, drives innovation, and delivers better business results.

At this time, Window Nation is unable to provide sponsorship for employment visas now or in the future. Candidates must be authorized to work in the United States on a permanent basis without the need for current or future visa sponsorship.

All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law.

We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

This is a unique opportunity to take control of and propel you along your career path. Baker Roofing invests in our employees by empowering success through a structured growth plan and intensive training courses. We value our employees by providing competitive benefits, prioritizing safety, and emphasizing work-life balance.

With more than 20 locations across the Southeast, Baker Roofing Company is an industry leader in providing an outstanding experience in commercial roofing, residential construction, metal fabrication, restoration, and more. We pride ourselves on over 100 years of quality work, investing in our employees, and providing a family-centered culture.

Pay: $30-35/hour

Benefits:

• 7 Paid Holidays
• Medical insurance
• Dental Insurance
• Vision Insurance
• 401K
• Paid Holidays

Cover roofs with TPO, EPDM, PVC, and related materials. May spray roofs, sidings, and walls with material to bind, seal, insulate, or soundproof sections of structures.

• Education: High School/ G.E.D
• Years of Experience: 1-3 years of roofing experience
• Driver's License

• Knowledge of safety techniques and procedures to set up a safety plan including toolbox talks, safety huddles
• Calculate and control labor projections, material storage, and material needs
• Ability to read shop drawings, reproduce manufacturing details, and layout roofs and walls
• Knowledge of how to cut, shape, fit, join, and install edge metal, insulation, ice & water shields, wood, or other construction materials
• Run material inventory
• Knowledge of how to install pipe boots, ridge/hip caps, rake, nail base, valley, eave lock, and ice & water shield
• Knowledge of how to install counter flashing, coping, fascia, gutters, miters, downspouts, roof curbs, flat lock, and thru-wall flashing
• Knowledge of how to install crickets, chimney flashing, curbs, and how to make seaming and horizontal and vertical soldering
• Ability to fulfill: timesheets, shop requisitions, and job reports
• Interpersonal and leadership skills with ability to work on a team and take corrective action when necessary
• Ability to train and supervise the crew and subcontractors as needed in order to meet the quality and production goals
• Meet with GC and customers

• Thoroughly review job file and shop drawing with manager and including the scope of work, materials ordered and delivery schedule, budget for labor productions (man-days), and job site contacts
• Ensure that proper safety and equipment are on the job and used in the proper manner
• Supervise and support crew every day about safety, quality, and labor production
• Monitor and maintain job site cleanliness and daily housekeeping
• Make sure on-site equipment is monitored and maintained, such as oil changes on kettle motors, belts on cutters, etc.
• Prepare and submit daily job reports, field progress problems, technical questions, and timesheets, as directed by manager
• Responsible for overall quality control of each job including: checking for water tightness, mops left on the roof, ensuring the job site is complete and has been cleaned up properly, coordinate punch list and job close out before crew leaves job site for the last time
• Install, repair, or replace single-ply roofing systems, using waterproof sheet materials such as modified plastics, elastomeric, or other asphaltic compositions
• Cut felt, shingles, and strips of flashing, and fit them into angles formed by walls, vents, and intersecting roof surfaces
• Install vapor barriers and/or layers of insulation on the roof decks of flat roofs and seal the seams
• Install partially overlapping layers of material over roof insulation surfaces, determining distance of roofing material overlap using chalk lines, gauges on shingling hatchets, or lines on shingles
• Cover roofs and exterior walls of structures with slate, single-ply systems, asphalt, aluminum, wood, gravel, gypsum, and/or related materials, using brushes, knives, punches, hammers, and other tools.
• Operate vehicles, mechanized devices, or equipment
• Train and coach other employees

• Requires standing up for long periods of time
• Requires use of ladders, scaffolds, and stairways
• Requires ability to climb, lift, balance, walk, and handle materials
• Requires use of abdominal and lower back muscles to support part of the body repeatedly or continuously over time without giving out or fatiguing
• Requires seeing details at close range
• Requires repetitive movement, bending or twisting, kneeling, crouching, stooping or crawling
• Requires ability to stand, walk, lift, and carry items weighing 50 pounds regularly

• Requires working in extremely bright or inadequate lighting conditions, in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures, including exposure to sounds and noise levels that are distracting or uncomfortable
• Includes exposure to contaminants, hazardous material, or equipment
• Mistakes are not easily correctable and have serious consequences, therefore safety procedures need to be followed
• Requires exposure to minor burns, cuts, bites, or stings
• Requires exposure to high places or dangerous conditions

The statements herein are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Baker Roofing Company is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, national origin, disability, or protected veteran status. If you need special assistance or accommodation in applying for employment at Baker Roofing Company, please contact our Recruiting department at 919-828-2975 or . EOE Minorities/Females/Disability/Veterans; VEVRAA Federal Contractor

• Principals only. Recruiters, please don't contact this job poster.

Epsilon Systems is seeking a Temporary Electrician II for the Modernization and Engineering division located in Portsmouth, VA. Summary: Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations.

• Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
• Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.
• Performs and/or verifies mechanical alignments.
• Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.
• Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).
• Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
• Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).
• Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
• Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
• Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.
• Performs component and/or system troubleshooting to diagnose problems.
• Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.
• Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.
• Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.
• Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.
• Troubleshoots motor controllers, control panels, and power distribution panels.
• Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.
• Assembles multi-pin connectors and fiber optic connections.
• Installs and seats brushes for AC and DC motors / generators.
• Completes inspection and resurfacing of commutators and slip rings.
• Performs work outside of trade if necessary.

• High school diploma or equivalent or vocational training.
• At least 5 years' experience as a marine electrician.
• Understands and is familiar with NAVSEA Standard items.
• Follows NAVSEA Standard Items.
• Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.
• Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.
• Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)
• Communicates effectively, work independently or in a group.
• Ability to do basic math, i.e. add, subtract, divide and multiply.
• Ability to read, write, speak, and comprehend English.
• Ability to obtain access to military and government installations worldwide.
• Ability to travel required.

• Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
• Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
• Able to lift, carry and move objects up to 50 lbs in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

When you join BW Design Group as a Project Manager, you are joining a team that will challenge you and position you for growth. In this role, you will work with a team of industry experts to help the world's leading companies solve their most difficult problems. You will join our Packaging Engineering Practice and partner with seasoned leaders, technical specialists, and subject matter experts to deliver the highest quality solutions to our clients with consistency and accuracy.

As a Project Manager, you will be responsible for leading the design, integration, installation, and start-up of packaging lines for food and beverage industries. As a PM you will provide engineering leadership experience and a solid working understanding of process, utility, packaging systems, drafting (CAD), controls, equipment procurement, installation, training, and start-up. Qualified candidates will have a proven track record delivering projects on budget & schedule, managing complex scopes, managing client interaction & expectations, supervising contractors and being able to identify & help develop new business opportunities.

The vision for this role is to support machine safety projects across all markets that BW Design Group supports. We have an established Machine Safety Program that can deliver a complete machine safety solution for our clients. Our solution can include all aspects of a safety life cycle including assessments, safety standard/specification creation, detailed safety design, safety hardware procurement, safety circuit verification, mechanical guarding, implementation/integration, contractor management, project management and safety validation.

Responsibilities:

• Be accountable for all aspects of project execution including line layout, vendor/contractor management, equipment procurement, schedule management, project finances, site management and installation support.
• Define the required scope of supply for machine safety compliance and implement safety life cycle solutions from risk assessments through installation and safety validation.

• Lead the packaging line design, integration, installation and start-up of capital projects, including estimation, justification, budget, schedule, design, implementation, acquisition, installation, start-up, troubleshooting, and documentation.
• Develop equipment design and specifications, design of equipment support systems, and bid analyses.
• Lead communications with vendors (OEM's) and contractors to implement automation solutions.
• Provide engineering solutions for continuous improvement objectives using industry standard tools and procedures (Change Control, ROI, etc).
• Evaluate existing packaging operations, and suggest and drive projects to provide immediate ROI and improve productivity.
• Identify and specify required tooling and/or packaging equipment for projects within designated timelines.
• Develop, maintain and grow solid client relationships.

What You'll Bring:

• B.S. in Mechanical Engineering, Electrical Engineering, Chemical Engineering, or equivalent technical degree
• Minimum 7 years of project engineering/management experience with packaging systems and/or manufacturing automation applications.
• Experience in the food, beverage, household products or personal care industries strongly preferred.
• Experience in supporting and/or implementing machine safety solutions preferred. That experience can come from supporting projects/programs or through completing industry recognized machine safety certifications (i.e. CMSE - Certified Machinery Safety Expert, FS Technician / Engineer (TV Rheinland) Machinery).
• Excellent engineering and leadership skills as well as the ability to simultaneously organize, and successfully execute multiple project responsibilities.
• Highly effective communication and interpersonal skills, and the ability to interact within both engineering and operational environments with both clients, and suppliers.
• Ability to develop, maintain and grow solid client relationships.
• Willing and able to travel as necessary for project requirements to include but not be limited to: project installation and start-up activities, client meetings, company sponsored meetings, trainings, industry related seminars, forums, or conventions, etc.

Our culture and commitment to our people is what sets us apart. We foster an environment of mutual respect, integrity, and unconditional interest in the individual and collective success of our professionals. Our model and entrepreneurial mindset offer a rewarding, challenging, and highly flexible path. As a Project Manager, you will build a meaningful and fulfilling career with the support of professional development resources and mentorships including our First Year Experience program, Individual Development Plans, and Career Path resources and tools. You will be surrounded by exceptional talent who will support your development as both a world-class engineer and a highly effective leader.

Feel like you're on the path to becoming a Project Manager but you're not quite there yet? We'd love to connect with you to see if we can take you from where you are today and grow you into a Design Group Engineering Consultant.

Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify.Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments.

Company: Design Group

Sr Mechanical Superintendent (Data Center Construction)

Weeks Group is a leading data center Owner’s Representative & Project Manager consulting firm with decades of experience overcoming complex mission critical challenges globally. As a women-owned business, we excel in solving tough problems, ensuring safe, timely, on budget delivery. We solve the hardest problems in the data center construction industry.

Our Values

We Answer the Call

Integrity • Honesty • Trust • Nimbleness

We Don’t Take No for an Answer

Persistence • Determination • Accountability

We Solve Problems

Especially on complex, high-intensity projects

We Expect the Best from Each Other

Teamwork • Communication • Ownership

We BTFM

Innovative thinking with zero tolerance for mediocrity

Role Summary

The Sr Mechanical Superintendent leads field execution of mechanical scope on mission-critical data center projects. This role owns day-to-day onsite leadership for mechanical activities: safety, subcontractor coordination, installation quality, schedule adherence, testing readiness, and turnover support. The Mechanical Superintendent ensures systems are installed correctly, documented properly, and turned over in a manner that supports successful startup, commissioning, and operations.

This is a hands-on, high-accountability role for a leader who can drive production, coordinate seamlessly with electrical and CSA teams, and maintain clean build discipline in critical environments.

Key Responsibilities

Safety & Field Leadership (Primary)

• Lead mechanical field operations while reinforcing a zero-incident culture.
• Ensure subcontractors comply with site safety plans, permits, JSAs/AHAs, LOTO requirements, hot work controls, and housekeeping standards.
• Conduct regular safety walks; correct unsafe conditions immediately and escalate when necessary.

Mechanical Scope Execution (Primary)

Lead and coordinate installation for mechanical systems, including (project-dependent):

• Chilled water / condenser water piping and equipment
• CRAH/CRACs, AHUs, MAUs, exhaust systems
• Cooling towers / fluid coolers / pumps / heat exchangers
• Hydronic specialties, valves, strainers, expansion tanks, insulation
• Mechanical supports, housekeeping pads, curb systems, equipment rigging coordination
• Fire protection interface coordination (as required)
• BAS/BMS coordination for controls and integration readiness
• Equipment access, service clearances, and maintainability requirements

Planning, Sequencing & Schedule Control (Primary)

• Own mechanical short-interval planning (daily/weekly) and support pull planning with measurable commitments.
• Coordinate mechanical rough-in, overhead work, and equipment setting paths with CSA/architectural progress and electrical busway/gear installation.
• Identify constraints early (design gaps, material delays, access conflicts) and drive resolution to maintain schedule.
• Track manpower, productivity, and area readiness; communicate impacts and recovery plans.

Quality Control & Clean Build Discipline (Primary)

• Enforce mechanical installation standards, tolerances, and manufacturer requirements.
• Drive quality walks and manage deficiency/punch lists to closure.
• Protect critical spaces: dust control, cleanliness, protection of finishes/equipment, and strict housekeeping expectations.
• Ensure labeling, tagging, and documentation support turnover and commissioning.

Coordination & Communication (Primary)

• Lead/participate in key coordination meetings: foreman huddles, subcontractor coordination, BIM/VDC coordination, look-ahead planning, and progress walks.
• Coordinate with commissioning agents (CxA), controls vendors, and TAB contractors to ensure readiness and logical execution.
• Communicate field issues clearly with options, impacts, and recommended solutions.

Procurement & Long-Lead Tracking (Supporting)

• Track and support procurement status for mechanical long-lead items (CRAH/CRAC, pumps, towers, valves packages, specialty equipment).
• Coordinate delivery, laydown, rigging plans, and installation readiness with the project team and vendors.

Testing, Commissioning Readiness & Turnover (Primary/Supporting)

• Drive mechanical completion by system/area to support startup and commissioning.
• Coordinate TAB and flushing/cleaning requirements (hydronic cleanliness, chemical treatment as required).
• Ensure prefunctional checklists, test results, and installation sign-offs are complete and filed.
• Support turnover requirements: as-builts, O&Ms, training coordination, warranties, spare parts, and final punch closure.

Knowledge, Skills & Abilities

• Strong mechanical construction background with superintendent-level leadership experience.
• Mission-critical/data center experience strongly preferred; other high-spec industrial or healthcare experience considered.
• Deep understanding of mechanical means and methods, sequencing, and constructability.
• Ability to read drawings/specs and enforce quality with subcontractors.
• Working knowledge of BAS/BMS coordination and commissioning flow (prefunctional → functional → integrated testing).
• Strong communication and conflict resolution skills; calm under pressure.
• Comfortable with field technology (Procore/ACC, Bluebeam, MS Office) and daily reporting.
• Understanding of CPM schedule logic and short-interval planning.

Experience & Education (Typical)

• 7+ years in commercial/industrial mechanical construction, including lead superintendent/foreman responsibility.
• Data center / mission-critical experience preferred.
• OSHA 30 preferred (or willingness to obtain).

Compensation & Benefits

• Competitive base salary based on experience and project scope.
• Performance-based bonus potential.
• Fully paid comprehensive benefits (medical, dental, vision) for you and your family.
• 401(k) Safe Harbor plan.
• Paid time off (PTO).
• Opportunity to work on technically complex data center projects in a high-performance environment focused on long-term growth and leadership development.

JOB SUMMARY

Master Technology Group (MTG) specializes in designing, installing, and servicing low-voltage commercial property technologies across local and national markets.

The Integrated Security Systems Technician (Traveling) provides customer-focused, workplace technology support to clients, field staff, installation partners, and internal team members. While most support work is performed remotely, occasional on-site assistance may be required locally and nationally.

Supported systems are primarily security-related, including video surveillance, access control, intrusion detection, and EAS. Additional support may encompass network programming, fire alarm systems, data infrastructure, AV, and other low-voltage disciplines.

An MTG Integrated Security Systems Technician must deliver exceptional customer service and cultivate strong professional relationships with clients, vendors, Local Service Partners (LSPs), and colleagues. This role requires technical proficiency, extensive knowledge of low-voltage systems, excellent organizational and multi-tasking skills, and strong verbal and written communication abilities.

Candidates must reside in the Twin Cities area and are expected to perform most of their work from our Eden Prairie, MN office. Periodic job site responsibilities may be required locally and nationally, with travel up to 60% supporting client sites, installations, and service operations.

To assist with critical service issues, the role includes on-call duties as part of daily responsibilities, requiring availability after hours on weekdays. Weekend on-call shifts will be rotated on a scheduled basis to ensure support during urgent weekend needs.

This position reports to the Manager of Technical Services.

KEY DUTIES AND RESPONSIBILITIES

• Support customers, coordinators, field technicians, and project managers with technical advice, troubleshooting, and resource allocation
• Collaborate with Business Development and Operations to provide pre-sales and post-sales support for MTG solutions and systems
• Deliver remote and hands-on training to field personnel to ensure compliance with all applicable codes, client specifications, and MTG’s quality standards
• Serve as an escalation point for troubleshooting, programming, maintaining, and servicing client systems
• Pre-program, build, and stage equipment for installation when practical, to streamline on-site setup
• Provide remote and on-site programming and commissioning for client systems
• Conduct remote and on-site quality assurance audits to verify system performance and installation standards
• Assist installation, service, and coordination teams with technical planning, issue resolution, and commissioning, ensuring systems operate as intended and meet MTG quality standards
• Provide user training to client representatives
• Provide technical training to field personnel and colleagues
• Contribute to continuous improvement initiatives by providing feedback to management on processes, efficiency, and client satisfaction
• Deliver outstanding customer service and build strong, professional relationships with clients, vendors, partners, and colleagues
• Other duties to support the company vision and goals as requested

QUALIFICATIONS

• Minimum of 5 years of field experience installing, configuring, programming, and servicing video, access control, and intrusion systems
• MN Power Limited Technician License (PLT) required
• Field experience with low-voltage cabling, data infrastructure, fire alarms, EAS, DAS, AV, and other workplace technology systems is advantageous
• Proven ability to design, configure, and program a variety of security-related systems
• Demonstrated experience in delivering user training to client representatives and technical training to field personnel
• Industry certifications such as NICET Video Security Systems Technician, ESA certifications, or equivalent are preferred
• Manufacturer certifications such as Axis Network Video, Milestone, Genetec, Exacq, Bosch, KeyScan, Avigilon, Lenel S2, March Networks, or Open Options are preferred
• Strong interest and motivation to pursue ongoing education and additional certifications
• Solid familiarity with the National Electrical Code (NEC)
• Ability to meet travel and on-call requirements for the position
• Excellent time management and organizational skills
• Strong problem-solving and decision-making capabilities
• Ability to multitask effectively in a fast-paced, multi-project environment
• Proficiency in Windows-based computer environments, including MS Office (Outlook, Excel, Word) and other standard software
• Excellent written and verbal communication skills

PERFORMANCE MEASUREMENTS

• Demonstrates a clear understanding of the key duties and responsibilities of the position
• Shows enthusiasm and effort to perform all aspects of the role effectively
• Exhibits competence and capability to execute key duties and responsibilities efficiently
• Consistently meets expected standards of quality and customer satisfaction
• Completes assigned tasks promptly and adheres to project deadlines
• Represents MTG in a professional manner at all times, embodying the company’s standards of conduct
• Demonstrates sound decision-making through practical analysis, effective problem-solving, and good judgment
• Maintains effective working relationships and collaborates well within a team environment
• Communicates clearly and professionally, both verbally and in writing, including emails, reports, and correspondence
• Demonstrates reliability through consistent attendance, punctuality, and timely completion of tasks
• Embodies MTG’s Core Values:
• People First: Demonstrates humility, helpfulness, and genuine care for others
• Above and Beyond: Exhibits a “whatever it takes” mindset, actively contributing beyond minimum expectations
• Sense of Urgency: Responds promptly and diligently to organizational and client needs
• Team Player: Demonstrates respect, support, and collaboration, sharing expertise generously
• Do the Right Thing: Operates with honesty, integrity, transparency, and strong ethical standards

COMPENSATION AND BENEFITS

Base Salary $85,000 - $110,000+ DOQ

Car Allowance

Phone Stipend

Medical, Dental & Vision Insurance

401k Match

PTO

Nice Healthcare

Life Insurance – Company-provided

STD / LTD – Company-provided

Employee Referral Bonus

Development Opportunities

About American Meat Companies:

American Meat Companies was founded by Ron and Mariellen Day in a small meat locker in Anaheim, California. From our very modest beginnings in 1975, American Meat Companies has grown to become one of the largest meat purveyors in Southern California and has expanded to a brand new state-of-the-art facility in Dallas, Texas.We produce a full line of steaks, hamburger patties, pork chops, and poultry items, and we make them to your specifications.

We know meat. And it’s all we do. We are passionate about quality and we are extremely proud of the reputation we have earned over the past 46 years.

2nd Shift Industrial Maintenance Tech Job Summary:

Under the supervision of the Facilities & Maintenance Manager, you will be responsible for setting up, installing, repairing, and maintaining production/manufacturing equipment and machinery for a new start-up facility. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Diagnosis equipment malfunctions and makes repairs or adjustments as needed. Responsible for assuring all work performed meets Product Safety and Quality, Employee Safety, and Legality of Policies and Procedures.

Essential Duties and Responsibilities:

1. Follow specifications of blueprints, manuals, and schematic drawings; install, maintain and repair

equipment, machinery, physical structures, and plumbing/electrical systems.

2. Inspect, measure, and test equipment while in operation visually (using electrical and electronic equipment) and auditory (listening for unusual sounds from machines or equipment) to detect malfunction, wear, misalignment, or other problems. Inspect used parts to determine changes in dimensional requirements.

3. Discuss/diagnose machine problems with the Maintenance Supervisor, Production Supervisor, Production Superintendent, Plant Manager, or other maintenance workers. Inform appropriate management personnel of equipment and parts needs.

4. Dismantle defective machines and equipment and install new or repaired parts. Reassemble and test machines.

5. Clean and lubricate shaft, bearings, gears, and other parts of machinery.

6. Install and repair electrical apparatus, such as transformers, wiring, and electrical and electronic components of machinery and equipment.

7. Layout, assemble, install and maintain pipe systems and related hydraulic and pneumatic equipment. Repair and replace gauges, valves, pressure regulators, and related equipment.

8. Install, program, and repair automated machinery and equipment, such as robots or programmable controllers.

9. Set up and operate machine tools, such as lathe, grinder, drill, and milling machine, to repair or fabricate machine parts.

Other Duties and Responsibilities:

1. Repair and maintain the physical structure of the establishment and perform preventative maintenance functions.

2. Assist production personnel in change-over and set-up procedures.

3. Attend safety classes/seminars as periodically scheduled.

Decision Making & Problem Solving: Responsible for troubleshooting, diagnosing, and repairing production equipment, including but not limited to industrial blenders, industrial mixers, automated packaging equipment, robotic equipment, pumps, valves, and pressure vessels.

Good Manufacturing Practices: Interprets GMP and HACCP regulations into Company and product-specific practices.

Production Support: Accountable for the efficient installation, maintenance, and repair of Electrical Controls and Mechanical machinery. Equipment includes but is not limited to Hydraulics Combo Dumpers, Meat Blenders, Grinders, Freezers, Scales, Labelers, Case Sealer, Baggers, Seasoning equipment, etc.

Project Management: Engages in cross-functional activities and collaborates across boundaries to ensure successful project implementation. Gathers information to interpret needs, assess requirements, and take the initiative to identify sound solutions through the application of expertise and knowledge. Must have a very strong customer service orientation with a high sense of urgency.

Quality System Compliance: Ensures the requirements of the Quality System, the Quality System Regulation (USDA, FDA), and other relevant standards are fulfilled.

Safety: Enforces Company safety policies and procedures. Responsible for the safe operation and performance of Maintenance and Facility.

Technical Documentation/Communication/Processes: Knowledge of preventive maintenance procedures / Total Productive Maintenance. Prior experience in Computerized Maintenance Management Systems.

Training & Development: Complete training and documentation thereof, in line with Company policies and procedures.

Other Compliance: Works to ensure compliance with all applicable laws and regulations issued by OSHA, EPA, Labor & Employment Law, and other federal, state, and local regulations, including Lock-out/Tag-out, confined spaces, and personal protection regulations.

Job Requirements (Education, Work Experience, Certifications, Skills)

Education: High school or equivalent (Required), Technical Degree (Preferred), technical training, or equivalent years' experience acceptable in place of formal education. Must be computer literate with proficiency in using CMMS systems.

Work Experience: Minimum five (5) years of industrial maintenance experience in manufacturing (Food Preferred); strong in precision maintenance, electro-mechanical troubleshooting, and other industrial skills to include pneumatic and hydraulic system knowledge with; experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings), product manuals (e.g., reading and applying knowledge to make repairs), troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns), and reading mechanical drawings (e.g., hydraulics, pneumatics); Experience with electrical systems to include low voltage control circuits, motor circuit controls, VFD s, PLC troubleshooting knowledge (Rockwell PLC/HMI knowledge), and electrical safety systems required.

Certifications: OSHA 40 (Preferred)

Skills:

Ability to communicate effectively with a variety of individuals.

Ability to work in a fast-paced environment.

Ability to reason, negotiate, instruct, persuade, or speak with others.

Ability to pay close attention to detail.

Strong interpersonal skills and judgment in communicating with staff.

Receptive to management development suggestions and willing to seek additional knowledge to facilitate job growth.

Excellent written and oral communication skills.

Proven ability to juggle multiple tasks simultaneously.

Ability to interpret HR regulations, safety rules, operating and maintenance instructions, and procedures manuals.

Ability to solve complex problems.

Fully competent to a high degree in mechanical knowledge.

Ability to troubleshoot electrical controls.

Ability to follow verbal and written instructions, as well as interpret pencil sketches and diagrams.

Ability to read ladder logic and use it to troubleshoot systems.

Other Duties and Responsibilities:

May be required to work overtime, evenings, or weekends to complete work. May be required to work flexible shifts, including on-call.

Other duties and tasks as assigned.

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• 2nd Shift
• Holidays
• Possible Overtime
• Weekends as needed

Work Location: In person