Trigonometry Quadrant Formulas Pdf Jobs in Usa

Position Summary:

Develops process plans and designs for the manufacturing of our parts and tools under direct supervision. Typically holds 0-3 Years of relevant engineering experience.

Primary Duties & Responsibilities:

·        Transfers customer data sets and generates drawings for estimates using CAD tools and others available software.

·        Creates forging drawings and 3D models from customer drawings and models using CAD tools.

·        Creates drawings and 3D models necessary for the manufacture of the dies and forging tools using the CAD tools and instruction from the engineering manager

·        Performs area, volume and weight calculations using CAD tools.

·        Creates detailed operation sequence and Standard Work documentation necessary for the production process per the process information provided by the supervising engineer.

·        Performs simple inspection procedures to dimensionally check dies and forgings.

·        Other duties as assigned

Required Skills:

·        Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, blueprints and specifications.

·        Ability to effectively present information and respond to questions from supervisors, managers, and shop personnel.

·        Ability to work with mathematical concepts such as probability, statistical inference, geometry, and trigonometry. 

·        Ability to apply the concepts of fractions, percentages, ratios and proportions to practical situations.

·        Ability to solve problems and deal with a variety of variables in situations where only limited standardization exists. 

·        Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.

·        A wide range of engineering knowledge with an emphasis on mechanics, materials, machining methods, mathematics and physics preferred.

·        Experience with Microsoft Office Programs (Excel, Outlook, Teams)

Desired Skills:

·        General knowledge of the concepts and standards used in part and process design with attention to potential lack of fill, defect information, mismatch and die failure.

·        General knowledge of the techniques, hardware and software used to inspect forgings and dies. 

·        CAD experience (CATIA preferred)

Experience & Education

·        Bachelor’s Degree (BS) from a four-year college or university for engineering

·        Engineering internship experience a plus

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

Work Environment 

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

Shultz Steel LLC is an equal opportunity employer. The company's policy and practice is to provide equal employment opportunities and to assure those opportunities, without regard to age, sex (including pregnancy, childbirth, breastfeeding or related medical conditions, gender, race, color, creed, national origin, ancestry, sexual orientation including gender identity or gender expression, religion, (including religious dress and religious grooming), mental or physical disability, legally protected medical condition, genetic information, marital status, military or veteran status, reproductive decision making, or any other status protected by applicable local, state or federal anti-discrimination laws

Oversees and coordinates the total construction effort in a wide range of building projects by personal performance or through supervision of superintendents and subordinate personnel.

Essential Duties and Responsibilities

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily, with or without special accommodations.

• Studies plans and specifications for construction on the basis of start and completion times, staffing requirements and timely procurement of tools, materials and equipment to conform to work schedules for each phase of construction.

• Attends or conducts all preconstruction, job site and update meetings and inspects work in progress to ensure that workmanship conforms to the plans and specifications and quality and is meeting construction schedules.

• Directs the set up of the site job office and equipment trailers; with proper permits, labor notices, EEOC and safety rules and regulations being posted in a conspicuous place.

• Directs supervisory personnel and subcontractors engaged in planning and executing work procedures, interpreting plans and specifications, and coordinating various phases of construction to maintain the current budget and schedule, while insuring all safety and quality standards are met.

• Confers with supervisory personnel and contractors to resolve complaints and grievances within work force.

• Confers with company management, designers, subcontractors and inspectors and suppliers of tools, equipment and materials to resolve construction problems and improve construction methods.

• Prepares, keeps current or reviews reports on progress and materials used, and performs two week ‘look a heads’ to ensure proper planning and adjustment and execution of work schedules.

• Ensures that all change orders are properly executed and indicated on ‘as-built’ plans.

• Conducts ‘Punch Out’ process throughout and at conclusion of project.

• Mentors, trains and develops support personnel.

• Ensure all required regulatory inspections are obtained and passed in a timely manner.

• Ensures general conditions budget is met.

• Directs and ensures that all OSHA regulations and safety policies and procedures are followed and necessary safety equipment is on site; safety meetings are adequately attended by company personnel and subcontractor crews; daily site safety walks are conducted and corrective action is taken; and that good housekeeping practices are observed and maintained by company personnel and subcontractors.

• Maintains good relationships with project managers, owners, engineers, inspectors, architects, subcontractors and other key stakeholders.

• Other duties may be assigned.

Supervisory Responsibilities

Manages 1–10 subordinate supervisors and subcontractors who supervise a total of up to 100 employees on the jobsite. Is responsible for their overall direction, coordination, and evaluation of all processes. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience: Four year degree (B.S.) or equivalent plus 5-10 years of job related experience or equivalent combination of education and experience.

Language Skills: Ability to read and interpret documents such as complex plans and specifications, safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Computer Skills: To perform this job successfully, an individual should have knowledge of Project Management software and Spreadsheet software.

Summary:

We are seeking a Quality Assurance Inspector at our manufacturing facility in Seattle, WA. This role will require you to accurately evaluate and document receiving, in-process and final inspection of highly intricate prototype, custom parts and assemblies for a variety of applications from Aerospace, military, Energy Production and R&D. You will need to have an extreme attention to detail, skill in basic shop mathematics, the ability to read and interpret blueprints and specifications and personal discipline to document and report nonconforming products in an objective manner.

Responsibilities:

• Enact inspection activities to obtain objective evidence of compliance for CNC manufactured parts, assemblies, complex tooling, and other components.
• Interpret and measure features containing Geometric Dimensioning and Tolerancing (GD&T).
• Use manual inspection tooling such as micrometers, calipers, height gauges and surface plate activities to obtain compliance evidence for requirements up to the fourth decimal place (tenths) of accuracy.
• Create and review compliance documentation related to Receiving, In-process and Final inspection on Materials, Processes and Completed Products.
• Ensure conformance with customer Drawing, Specification and Purchase Order.
• Assist engineering department in implementing strategies to improve accuracy.

Qualifications:

• Have recent 3-5 years (min) working experience within a machine shop atmosphere.
• Have a reasonable understanding of math, including trigonometry and geometry.
• Have a strong understanding of GD&T per ASME Y14.5.
• Be skilled in the use of all measurement equipment and machinery within a manufacturing environment.
• Strong skills in blueprint and part drawing interpretation for high tolerance, precision parts are mandatory.
• Bring ideas to the table to increase speed and efficiency in the department.

Skills:

• Experience using DCC controls on a CMM.
• Experience in PC-DMIS, utilizing both solid models and touch point programing to perform inspection activities.
• Functional use of SolidWorks or a similar CAD system.
• Familiarity with complex dimensional reporting mechanisms, such as AS9102.
• Manipulation of outputs to multiple formats such as linear graphical representation, point cloud comparison, and polar graphics.
• Familiarity with Digital Product Definition (DPD) requirements per D6-51991 desired.

If you feel this is the time to join an expanding company where you can be effective and be noticed for the positive influence you bring, submit your resume online.

Diversity and equity are important values for us, and we encourage all qualified applicants to apply, regardless of race, gender, religion, sexual orientation, or disability. Position is subject to export control regulations as defined in 22 CFR 120.62

Our customers are at the heart of everything we do. As a privately owned and managed company, we are committed to delivering an exceptional experience through our comprehensive services. We specialize in full-service engineering, design, precision machining, and equipment manufacturing. Ensuring the highest standard of quality and craftsmanship or our valued clients.

What we're looking for:

• Comfortability working with high mix, low volume parts. Ranging in various sizes, materials, and complexity.
• Extensive hands-on experience in the setup and operation of CNC machines.
• Familiarity with selecting, maintaining, and using various cutting tools and fixtures.
• Strong troubleshooting abilities to identify and resolve machining issues quickly. For example:
• Skilled in identifying mechanical and software issues within CNC machines. This includes understanding error codes, alarm messages, and other indicators that suggest a malfunction.
• Recognizing signs of tool wear, such as changes in surface finish or dimensions, and knowing how to adjust feed rates, speeds, and tool selections accordingly. Also adept at diagnosing and addressing tool breakage to minimize downtime.
• Experience in implementing process improvements and efficiencies.
• Ability to program CNC machines from scratch, when needed.
• Skilled in selecting optimal tool path strategies, including appropriate feeds, speeds, and depths of cuts.
• Ability to calculate RPM based on SFM.
• Versatility in operating both CNC vertical machining centers and turning centers is highly preferred.
• High attention to detail, capable of maintaining tight tolerances.
• Advanced knowledge of shop mathematics, including trigonometry.
• Strong ability to interpret and understand complex technical drawings and blueprints.
• Consistently efficient in running both new and repetitive jobs.

The candidate should be able to demonstrate a deep understanding of machining processes and the ability to produce high-quality components efficiently.

Why you'll love joining the Butler Tool Team:

• Competitive wages with overtime opportunities
• Comfortable air-conditioned shop
• 100% company paid premiums for Health, Dental, Life Insurance, and Short-Term Disability Insurance
• Up to 100% tuition reimbursement for continued education in various fields
• PTO with 8 paid holidays per year
• 401(k) plan with company matching contributions
• Annual bonus opportunities
• Referral bonuses

We're moving! Butler Tool is currently building a brand-new facility in Sussex, WI. This facility will be over twice as big as our current location! Please consider this possible commute change to be in affect within the coming year.

Company Overview

The Horsburgh & Scott Company is a leading manufacturer of industrial gears and custom gear drives, boasting nearly 140 years of engineering and manufacturing expertise. Our commitment to quality and innovation ensures that we deliver the highest quality gearing products and services to our customers. To learn more about our Company and capabilities, visit our website at Horsburgh & Scott | Gear Manufacturer and Gearbox Repair.

Job Summary:

As a Machine Operator for H&S, you'll be setting up and operating Boring Mills, Lathes, Hobbing, and Grinding Machines to machine industrial gearing parts to specific tolerances. The operator is responsible for operating controls, setting offsets, editing programs, some deburring, and performing self-inspection of parts in-process and upon completion for conformance to requirements. The Operator will also use large overhead cranes and other large equipment.

Primary responsibilities:

• Operate machine tools such as lathes, milling machines, and grinders to produce metal parts.
• Review electronic or written blueprints or specifications for a job.
• Calculate where to cut or bore.
• Shape steel, aluminum, titanium, plastic, silicon and other materials.
• Determine how fast or slow work piece is fed into machine.
• Determine how much material to remove.
• Select tools and materials for the job.
• Plan the sequence of cutting and finishing operations.
• Mark the work piece to show where cuts should be made.
• Position work piece on the drill press, lathe, or milling machine.
• Monitor and control feed rate and speed.
• Ensure work piece is properly lubricated and/or cooled.
• Regulate temperature of work piece.
• Detect problems by listening for specific sounds.
• Adjust cutting speed to compensate for harmonic vibrations.
• Monitor the accuracy of cuts.
• Replace dull cutting tools.
• Check accuracy of work against blueprints and specifications.
• Produce large quantities of parts.
• Determine how automated equipment will cut a part.
• Determine cutting path.
• Concert path, speed, and feed information into set of instructions for machine tool.
• Use manual and computer-controlled machinery.
• Write basic programs.
• Modify programs in response to problems.

Qualifications and Experience

• Minimum of five years' experience on CNC Horizontal Boring Mills, Lathes, and Grinders, and proficiency with large-part machining and blueprint reading; with the understanding of geometric tolerancing and dimensioning.
• CNC programming experience a plus.
• Must be able to perform own setups, measure parts that consistently result in precision quality parts.
• Large overhead crane experience and move large work pieces.
• Must be able to edit G and M-codes, trouble shoot jobs and make adjustments as required.
• Strong shop mathematics (trigonometry) aptitude and the ability to use precision measuring instruments (calipers, mics and other gauges).
• Must have the ability to use a feed and speed chart or calculator to determine appropriate feeds, speeds, and depths of cut.
• Understanding of metal properties and appropriate cutting tools.
• Positive attitude required; dependable, self-starter and the willingness to help others.
• Ability to work in a large manufacturing environment and performs well with minimal supervision.
• Must be able to perform the essential functions of the job with or without accommodation.

SUMMARY OF POSITION:

The Engineering & Programming Technician works independently throughout the manufacturing plant to analyze, modify, and build control systems to improve safety, quality, delivery, and productivity of equipment and facility systems. Additionally, this individual may be called upon to assist in troubleshooting machine issues, to implement safety, quality, and productivity projects, and to introduce new products and processes. This individual will be responsible for identifying and implementing opportunities that are machine and process related that can be improved through the use of technology. They will need to coach and mentor others within the manufacturing plant in their areas of expertise. This position works with other technicians, tool room personnel, planners/schedulers, engineers, department managers, and operators during the analysis, build, and implementation phases of various projects. This individual will also work with the MES systems group to ensure that Pella control systems standards are applied and maintained.

PELLA CORPORATION REQUIREMENTS:

· Pass drug screen

· Pass pre-work vision screen

· Pass pre-employment tests

· Pass pre-work ability screen

ENVIRONMENT:

· Noise level requires hearing protection in designated areas

· Seasonal high temperatures and humidity

· Work in a team environment with the ability to communicate in a concise, polite and respectful manner

ESSENTIAL RESPONSIBILITIES:

§ Flexibility of work hours including mandatory OT when business needs requires.

§ Ability to safely work with and around moving equipment

§ Ability to communicate in a concise, polite and respectful manner with team members.

§ Regular / dependable attendance consistent with attendance guidelines is required.

§ Must comply with safety, quality, and production requirements and procedures.

§ Must maintain good housekeeping.

§ Design and implement controls for new and existing machines or processes using a variety of hardware components which include PLC’s, HMI’s, CNC’s, PC’s, motion controllers and standard industrial controls.

§ Ability to assist with the building of machines, tools, fixtures, jigs, and templates, as well as the project management of all of these.

§ Extensive knowledge of Programmable Logic Controllers (PLCs) and computers are required.

§ Must independently write, analyze, and modify PLC programs.

§ Ability to assist in maintaining all models and series of PLCs currently in use.

§ Maintain backup copies of PLC programs used in production and facility related equipment.

§ Develops electrical estimates for time, cost, and quality for projects.

§ Must have ability to work with data downloads.

§ Ability to establish and maintain machine settings for data downloads and collaborate with IT to set up or modify settings for data downloads.

§ Ability to troubleshoot and assist maintenance efforts when needed.

§ Ability to perform PM inspections on equipment.

§ Ability to obtain the appropriate PIV license.

§ Ability to work on ladders and vertical lifts when required.

ADDITIONAL RESPONSIBILITIES:

§ Other duties may be assigned.

§ Manage project related to improving equipment and facility using technology

§ Provide training to others on areas of expertise

EDUCATION AND EXPERIENCE:

§ Recommended that this individual has completed or is enrolled and seeking a 2 or 4 year degree in a related field of expertise.

§ Manufacturing-related experience is preferred.

§ Job specific experience is preferred.

§ Maintenance progression completion preferred.

SKILLS AND TALENTS: (*skills are required prior to entry into the position)

§ Decision making / problem solving in a manufacturing environment with minimal supervision.*

§ Ability to suggest process improvements and resolve problems.*

§ Must be self motivated, technically minded, and have good hands-on-ability.*

§ Excellent communication skills and the cognitive ability to learn the safety, quality, and productivity standards.

§ Ability to provide training to improve and maintain the programming knowledge of technical employees.

§ Organizational skills and time management skills to manage projects.

§ Knowledge of computer software such as AutoCAD, CMMS, and Microsoft Office required.

§ Ability to diagnosis and repair electrical, mechanical, pneumatic, and hydraulic problems.

§ Ability to work with sawdust system, compressed air, oxidizers, steam boiler, and electrical distribution systems.

§ Flexibility to travel.*

FACTORY SKILLS CLASSES PREFERRED

§ Industrial Math

§ Measurement Technology

§ Algebra/Trigonometry

§ Product Terminology

MAINTENANCE TRAINING PREFERRED

§ Basic Electricity

§ Motor Control I & II

§ Class B Electrician

§ Beginning Programmable Controllers

§ Pneumatics/Hydraulics

§ Advanced PLC

§ Maintenance Blueprint Reading

§ AutoCAD

PHYSICAL REQUIREMENTS:

· Lift up to 100 lbs. at waist level and up to 70 lbs. at shoulder level up to an occasional basis when moving products

· Push or pull with up to 100 lbs. of force up to an occasional basis when moving products

· Generate up to 90 lbs. of grip strength up to an occasional basis with each hand while handling products

· Generate up to 15 lbs. of pinch strength up to an occasional basis with each hand while handling products

· Display average coordination with both hands up to a continuous basis while performing job tasks

· Perform elevated work up to an occasional basis when handling products

· Stoop, kneel or squat up to an occasional basis when handling products

· Reach forward and to the side up to a frequent basis when handling products

· Stand up to a continuous basis and walk up to a frequent basis during the course of each shift

· Able to perform repetitive tasks up to 12 hours per day

*** Sign on Bonus ***

About Means Engineering, Inc.

Means Engineering, Inc., headquartered in Carlsbad, CA, delivers innovative solutions across the medical, industrial, semiconductor, and military sectors.  We combine deep expertise in product development with a relentless commitment to design, function, and quality.

Our team is guided by our core values — Passion, Integrity, Innovation, Quality, and Ethics — ensuring every project meets the highest standards. Join us and be part of a company that values craftsmanship, collaboration, and excellence.

Key Responsibilities:

• Perform advanced-level setup and operation of milling, turning, and grinding machines.
• Troubleshoot and resolve machining issues quickly and effectively.
• Read and interpret blueprints, technical drawings, and job specifications.
• Execute high-precision benchwork and layout activities.
• Edit CNC setup sheets; suggest and implement programming or process improvements.
• Inspect parts to ensure conformance to quality standards and specifications.
• Accurately document work in the ERP system, including job status, time tracking, and nonconformance reports.
• Collaborate with Process Engineering on new product introduction (NPI) and continuous improvement projects.
• Maintain a clean, organized, and safe work environment; follow all company policies and safety

Qualifications:

• Minimum of 7 years of related machining experience.
• Strong English communication skills – able to understand verbal and written instructions, collaborate with team members, and actively participate in meetings and training.
• Math proficiency in algebra, geometry, and trigonometry.
• Exceptional measurement skills with the ability to work within tight tolerances.
• Expertise in reading and interpreting technical drawings, specifications, and quality standards.
• Ability to document quality control requirements clearly and accurately.
• Solid understanding of tooling, equipment safety, and machining best practices.
• A proactive mindset for addressing non-conforming operations and producing accurate, high-quality parts within deadlines.
• Ability to work both independently and collaboratively, with experience mentoring junior team members

Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).

Manage stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock.

Program and operate CNC/Manual mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.

Set up CNC/Manual mills and lathes by installing and adjusting chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.

Verify settings by measuring positions, first-run part, and sample workpieces.

Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

Ensure safe operations by adhering to safety procedures and regulations.

Maintain equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions.

Proficiency with software applications including CAD - CATIA preferred, Microsoft Excel, Word & PowerPoint.

CNC Programmer/Machinist Responsibilities:

Write and optimize CNC programs to create complex parts on 3 and 5 axis machining centers.

Design and fixture complicated setups on manual and CNC machines.

Calculate speeds and feeds for multiple materials.

Read and understand drawings.

Create and compile necessary documents to aid setting up machines.

Working knowledge of the following machines: Mill (manual and CNC), Lathe (manual and CNC), Saws.

Select tooling for specific applications.

Machine parts to print and/or other special requirements.

Utilize measurement equipment to qualify completed parts.

Requirements:

Minimum 5+ years experience writing CNC programs in a machining environment.

Demonstrates proficiency with CAD (CATIA), CAM software and G-code.

Experience with any CAD System, not limited to CATIA only: Mastercam, GibbsCam is acceptable.

Experience in using Vericut is a plus.

Proficient with GD&T.

Manual and CNC operator experience required.

Demonstrates strong time management skills with the ability to effectively coordinate multiple projects.

Experience writing post processors is a plus.

Knowledge of Microsoft Office Tools: Excel, Power Point

Time Type: Full Time

Starting Pay: $50,000 / YR

Job Location: San Marcos, TX

McCoy’s Building Supply is looking for a Risk Safety Coordinator. A Risk Safety Coordinator is consultant multiple assigned company facilities and plans, directs, and implements organization safety program to ensure a safe and accident-free work environment.

The final candidate can office in our Headquarters location in San Marcos when not traveling or may choose to live in a central area in the markets they support. Relocation assistance will be provided to the final candidate who wishes to move to either area.

This is an in-person Risk position and is not eligible for 100% remote work in order to best support our employees working in our retail and manufacturing facilities.

SUMMARY

Plans, directs, and implements organization safety program to ensure safe and accident-free work environment by performing the following duties:

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Plans and implements safety policies and procedures in compliance with McCoy’s internal policies, local, state, and federal laws, including Occupational Safety and Health Administration (OSHA), Federal Motor Carrier Safety Act (FMCSA), Department of Transportation (DOT), etc.
• Plans and implements programs to train managers and employees in work site safety practices and fire prevention
• Works with and through store management, executive management and various insurance carriers and other third-party consultants within the risk management industry
• Prepares, studies and analyzes accident causes and hazards. Prepares written reports of findings and recommendations regarding unsafe and potentially dangerous conditions
• Inspects facilities to detect existing or potential accident and health hazards, determines corrective or preventive measures and follows up to ensure measures have been implemented
• Evaluates employee safety behaviors and work practices, works with store management to ensure preventive practices are followed
• Inspects properties such as buildings, yard area and vehicles to evaluate physical conditions, safety practices and hazardous situations
• Provides information such as signs, posters, barriers, and other materials to warn of potential and actual safety hazards and to prevent access to hazardous conditions
• Responds to, investigates and follows post-inspection procedures and post-accident response procedures for company related incidents
• Compiles, drafts and submits accident reports required by regulatory agencies
• Prepares and arranges safety exhibits and material for display, promotional work, industry conferences, and exhibitions
• Represents the organization in community or industry safety groups and programs. May conduct informal meetings among various educational and civic groups to promote general safety concepts
• Maintains safety files and records
• Follows standard operating procedures while carrying out the responsibilities of position
• Attends all team meetings and company training sessions as required

SUPERVISORY RESPONSIBILITIES

This job has no supervisory responsibilities

QUALIFICATIONS  

• Bachelor's degree from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience.
• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Ability to utilize Microsoft Word, Excel & Outlook, and other 3rd party software applications as assigned

WORK AVAILABILITY

• Must maintain regular and acceptable attendance, at such level as is determined by management
• Must be regularly available and willing to work at least 8 hours per day, 40 hours per week or such other hours per day or hours per week as the employer determines are necessary or desirable to meet business needs
• Must be available and willing to work such weekends and holidays as the employer determines are necessary or desirable to meet its business needs

TRAVEL REQUIREMENTS

• This position requires frequent travel with overnight stays
• Must meet driver’s license requirements as required by the company
• Must be able to legally obtain a rental vehicle in all states in which the company does business
• Must have current auto liability insurance

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is occasionally loud.

McCoy’s is an equal opportunity employer. Equal access to programs, services and employment is available to all persons. Those applicants requiring reasonable accommodations in the application and/or interview process should contact a representative of the People Development Department at (866) 896-0884. EOE, AAP, D, F, VA

CNC Programmer / Machine Tool Engineer / CNC Machinist required to join a leading provider of advanced machining solutions.

The CNC Programmer / Machine Tool Engineer / CNC Machinist will have strong experience working on a range of CNC machines including lathes, grinders, and mills. The ideal candidate will be proficient in

Mastercam and SolidWorks, with the ability to write and modify programs to automate machining processes. The role will focus on optimizing the efficiency of CNC operations and troubleshooting any technical issues that arise during production.

The CNC Programmer / Machine Tool Engineer / CNC Machinist will be based in our Canastota, NY facility, supporting manufacturing operations and working with various production teams to ensure the successful completion of machining tasks.

Package

• $43.00 – $48.00 per hour, DOE
• 100% company-paid health insurance
• Paid time off
• Competitive holiday package

CNC Programmer / Machine Tool Engineer / CNC Machinist Role

• Based in Canastota, NY, with occasional travel to client locations if required.
• Write and modify CNC programs for 3, 4, and 5-axis mills and lathes.
• Review CAD blueprints and translate designs into CNC programs.
• Assist machinists during CNC machine set-up and resolve technical issues.
• Select the appropriate cutting tools and define the sequence of operations for each job.
• Troubleshoot and resolve mechanical and electrical issues with CNC machines.
• Work with engineering and internal teams to develop accurate product quotes and technical solutions.
• Train junior technicians and machinists on CNC operations.
• Maintain safety compliance and ensure all tasks are carried out in line with company regulations.

CNC Programmer / Machine Tool Engineer / CNC Machinist Requirements

• At least 4 years’ experience in CNC programming with 3, 4, and 5-axis mills and lathes.
• Proficiency in Mastercam and SolidWorks.
• Strong understanding of mechanical systems and experience with CNC machines.
• Strong math skills, particularly in algebra, trigonometry, and physics.
• Excellent problem-solving abilities and troubleshooting skills.
• Ability to work independently with little supervision and manage multiple tasks.
• Strong written and verbal communication skills.
• Knowledge of metal shop equipment and machining processes.
• Experience with CMMs and CNC Mills is a plus.
• High school diploma required, technical certifications or related education preferred.