Machinists Incorporated Jobs in Usa

• Set-up and operate all machine tools in the EDM Room including, but not limited to, Ram's Wire's and CNC machining centers.

• Capable of operating conventional mills, grinders, and lathes.

• Work to tolerance of+/ .0005\"

• Produce tooling components and any other parts normally produced in the Tool Room through verbal instructions, drawings, sketch, and machine programs.

• Independently make own set-ups for all assignments.

• Interpret and edit CAD generated programs.

• Reports directly to shift supervisor but may be given direction by other assigned and authorized individuals in the department or organization. May be required to do work of equal or lower classification.

POSITION SUMMARY: The primary function of the Production Machinist is to operate production machines under the guidance and direction of the Set-Up Technician while diligently monitoring product quality.

DUTIES AND RESPONSIBILITIES (essential functions of position):

Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. For assigned area and products:

• Power up machines and zero return axis to the home position.
• Follow prescribed quality procedures, identify all dimensions established at the machining operation, and check established dimensions using the in-process inspection sheet.
• Make offsets to tools or work positions to achieve dimensionally acceptable products.
• Understand surface finish requirements and change tools as needed to maintain the finish.
• Utilize shop travelers in production to verify correct material, size, quantity, and any additional notes or work instructions that differ from the customer print.
• Execute start-up procedures following machine crashes or major tool breakages.
• Support workplace organization efforts, including removing and storing fixtures, vices, and stops after jobs, replacing tooling and small tools in designated areas, and cleaning machines.
• Follow procedures for time reporting and scrap reporting via data collection to provide accurate job costing data.
• Adhere to prescribed safety procedures.

ESSENTIAL EDUCATION, SKILLS, EXPERIENCE AND QUALIFICATIONS:

• Education: High School diploma or equivalent.

NONESSENTIAL SKILLS, EXPERIENCE AND QUALIFICATIONS (not necessary but preferred):

• Previous machining.
• Blueprint reading.
• Understanding and application of GD&T.

PHYSICAL DEMANDS AND WORK CONDITIONS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Must be able to work in a manufacturing environment.
• Eyesight and hearing must be correctable to standard level.
• Ability to lift a minimum of 25 lbs and up to 50 lbs on a daily basis.
• Ability to stand for a minimum of 8 hours and up to 12 hours per day.

• 
  
• Perform programming and machinery set up with minimum assistance, except on the most complex work and/or where exceptionally close tolerances are required. Perform prototype work from detailed specifications. Exercise considerable care of equipment, tools, parts, machines, and materials to prevent damage.
  
• Interpret drawings, and route sheets to ascertain nature of assigned work orders.
  
• Compute accurate mathematical dimensions needed to manufacture parts of average complexity. Use precision measuring instruments.
  
• Perform quality machining of various types of materials as needed.
  

• 
  
• Vocational or Technical Certificate in related field and at a minium of 5 years of directly related experience
  
• Ability to use shop mathematics, drawings and measuring tools.
  
• Must have the ability to use various machinist measuring tools
  
• Must maintain a 5S work station in a team environment
  

• 
  
• Basic Knowledge of ISO and/or AS9100
  
• Working knowledge of Lean Manufacturing/6 Sigma/Kaizen
  
• Knowledge of specific software (design, analysis, ERP...)
  

• 
  
• Machine model components using CNC and manual mills and lathes.
  
• Program, setup, and operate 3-, 4-, or 5-axis CNC machines.
  
• Hand-finish parts as required, using contouring and polishing.
  
• Collaborate with design engineers, make recommendations and share best practices with machining approaches and materials as a subject matter expert (SME) on machining
  
• Read and interpret engineering drawings (CAD/CAM) and tolerancing schemes, including GD&T.
  

• 
  
• High School Diploma or GED
  
• 3-5 years of experience with setting up, programming, editing and operating CNC milling and lathe machines
  
• Experience with machining metals (aluminum, stainless steel) and other materials
  
• Experience with design process and mechanical assembly. Must be able to read and interpret drawings and blueprints
  
• Must be able to obtain and maintain an DoD Secret Clearance
  
• Effective verbal and written communication in English
  
• Basic MS Windows skills
  
• Ability to perform basic mathematical computations
  
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
  

• Active DoD Secret Clearance

CNC Machinist (Level 1, 2 & 3)

Pierce / King County, WA

Day Shift & Swing Shift

Contract-to-Hire & Direct Hire

$25 - $50 per hour DOE

Overview

We are seeking skilled CNC Machinists at multiple levels (Machinist I, II, and III) to support precision manufacturing operations. This role focuses on producing high-quality parts using CNC equipment while maintaining strong safety, quality, and efficiency standards.

Key Responsibilities

All Levels:

• Set up and operate CNC mills (3, 4, and 5-axis)
• Read and interpret blueprints, GD&T, and work instructions
• Inspect parts using precision measuring tools (calipers, micrometers, gauges)
• Load, edit, and run CNC programs (G-code & M-code)
• Troubleshoot machining issues and adjust processes as needed
• Maintain accurate production and inspection records
• Follow all safety and quality procedures

Level Breakdown

Machinist I:

• 1+ year of machining experience
• Basic CNC setup and operation
• Ability to read prints and perform inspections

Machinist II:

• 3+ years CNC machining experience
• Independent machine setup and operation
• Experience editing programs and working with GD&T
• Strong troubleshooting and problem-solving skills

Machinist III:

• 5+ years CNC machining experience (including 5-axis)
• Leadership experience in a machine shop environment
• Mentor and train machinists
• Drive workflow, quality, and production performance
• Act as technical subject matter expert on the floor

Qualifications

• Strong attention to detail and quality
• Ability to work independently and as part of a team
• Basic math and computer skills
• Reliable attendance and strong work ethic
• Ability to stand for extended periods and lift up to 50 lbs

What We’re Looking For

• Safety-first mindset
• Problem solvers who take initiative
• Team players with a strong sense of accountability
• Machinists who take pride in producing high-precision work

On the Contract-to-Hire program, you will have access to a basic MEC plan

TruFit Staffing is an equal opportunity employer and does not unlawfully discriminate on the basis of race, sex, age, color, religion, national origin, marital status, veteran status, sexual orientation, or any other basis prohibited by federal, state, or local law. TruFit Staffing is an ALE and offers a Minimum Essential Coverage (MEC) plan in compliance with ACA rules and regulations.

Harris & Bruno International (H&B), a printing equipment and spare parts manufacturer, is seeking full-time CNC Machinist III ($30-$35 p/h) & CNC IV/Programmers ($36-$45 p/h). See below for both job descriptions.

CNC Machinist III ($30-$35 P/h)

This is a highly skilled, senior-level machinist responsible for setting up and operating CNC equipment to manufacture precision components. This role serves as a technical expert on the shop floor, leading complex machining projects, troubleshooting issues, and mentoring junior machinists to ensure quality, efficiency, and continuous improvement.

Expectations

• Set up and operate CNC mills for complex, tight-tolerance parts
• Edit and optimize CNC programs (G-code or CAM-generated)
• Interpret advanced engineering drawings, GD&T, and specifications
• Select appropriate tooling, fixtures, and machining strategies
• Perform first article inspections and in-process quality checks using precision measuring tools
• Troubleshoot machining issues, including tooling, programming, and material challenges
• Optimize cycle times and improve manufacturing processes
• Lead or support continuous improvement initiatives (lean, 5S, etc.)
• Train, mentor, and provide guidance to CNC Machinist I & II team members
• Collaborate with engineering and quality teams to resolve design or production issues
• Maintain equipment and ensure proper machine upkeep
• Follow all safety and quality procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training or apprenticeship preferred)
• 5–10+ years of CNC machining experience in a manufacturing environment
• Advanced experience with CNC mills (multi-axis preferred)
• Basic programming skills (G-code and/or CAM)
• Deep understanding of GD&T and blueprint reading
• Proficiency with precision measurement tools (micrometers, calipers, height gauges, CMM exposure a plus)
• Experience machining a variety of materials (aluminum, steel, stainless, etc.)
• Strong troubleshooting and problem-solving skills
• Ability to work independently with minimal supervision

Preferred Qualifications:

• Experience with 4-axis and 5-axis machining
• Lean manufacturing or continuous improvement experience
• Leadership or team lead experience
• Familiarity with ERP/MRP systems

CNC lV/Programmer ($36-$45 p/h)

This is a senior-level technical expert responsible for full-cycle CNC programming, setup, and operation of complex precision components. This role leads advanced machining strategies, develops efficient programs using CAM software, and drives continuous improvement across machining processes. This position supports engineering and manufacturing by assisting with troubleshooting, process development, and manufacturability improvements, while mentoring machinists and supporting production excellence.

Expectations

• Develop, write, and optimize CNC programs using CAM software (e.g., Mastercam, Fusion 360)
• Set up and operate CNC mills and/or lathes for highly complex, tight-tolerance parts
• Interpret advanced engineering drawings, CAD models, and GD&T requirements
• Design and recommend tooling, fixtures, and workholding solutions
• Lead new part introduction (NPI) from print to production
• Perform program prove-outs, first article runs, and process validation
• Troubleshoot and resolve complex machining, tooling, and programming issues
• Optimize cycle times, tool life, and overall machining efficiency
• Collaborate closely with engineering to improve part manufacturability (DFM feedback)
• Mentor and train CNC Machinist I–III team members
• Establish and document standardized work instructions and setup sheets
• Support continuous improvement initiatives (Lean, 5S, Kaizen)
• Ensure compliance with quality standards and safety procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training strongly preferred)
• 8–12+ years of CNC machining experience, including advanced programming
• Expert-level proficiency with CNC mills (multi-axis required)
• Advanced CAM programming experience (Mastercam, Fusion 360, or similar)
• Strong G-code knowledge and ability to edit programs at the machine
• Deep understanding of GD&T and blueprint interpretation
• Experience with complex materials (stainless steel, tool steels, aluminum, etc.)
• Proficiency with precision inspection tools; CMM experience preferred
• Proven ability to troubleshoot and optimize machining processes
• Ability to work independently and lead technical projects

Preferred Qualifications:

• 4-axis and 5-axis machining expertise
• Fixture design experience
• Lean manufacturing or Six Sigma exposure
• Experience with ERP/MRP systems

Both Positions:

Physical Requirements:

• Standing/Walking: Must be able to stand and walk for extended periods.
• Lifting/Carrying: Must be able to lift, carry, push, or pull materials and equipment weighing up to 50 pounds.
• Manual Dexterity: Requires the use of hands and fingers to handle, feel, reach, and operate tools, measuring instruments, and computer controls.
• Vision Requirements: Must have close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus to inspect parts and read precision measuring instruments.
• Hearing and Communication: Must be able to hear machine sounds, alarms, and verbal instructions in a noisy environment.
• Postural Requirements: Must be able to bend, stoop, kneel, crouch, and occasionally climb or balance while loading materials or accessing machinery.
• Work Environment: Exposure to moving mechanical parts, metal shavings, noise, coolant, and shop odors. Personal protective equipment (PPE) such as safety glasses, hearing protection, and safety shoes are required.

Benefits Package Includes:

• Medical.
• Dental.
• Voluntary Vision.
• Company provided life insurance with the option of additional voluntary life insurance.
• 401k with employer match.
• Robust PTO policy beginning with 3 weeks earned the first year.
• Paid holidays.

About Harris & Bruno International:

H&B is a state-of-the-art manufacturing company headquartered in Roseville, CA with an established location in Germany and new location in Post Falls, Idaho with a brand-new facility. Since 1948 we have been building equipment for some of the largest names in printing, such as HP, Shutterfly, and Vistaprint. Although we are a small company, the equipment and machines we build go to every corner of the world. From the designing and engineering, fabrication, mechanical and electrical assembly, and final installation at the customers facility, we do it all.

Tidewater Staffing is currently seeking Outside Machinists for work in various local shipyards including locations of Newport News, VA, Norfolk, VA, and Portsmouth, VA.
The Outside Machinist must possess knowledge, skills, and abilities to perform job operations/tasks on conventional and nuclear ships and submarines. The Outside Machinist must be assignable to any work center excluding nuclear and subsafe machinery.
The following is a list of typical work that an Outside Machinist might be asked to perform:

• 
  
• Remove, repair, overhaul, install and align main propulsion machinery and associated equipment/components. Also remove, repair, overhaul, install, and align equipment associated with auxiliary systems such as condensers, compressors, pumps, forced draft blowers, main feed pumps, various types of valves, cargo handling machinery, anchor handling gear, boat davits, cranes, elevators, conveyors, firefighting equipment, machine shop equipment, galley, and laundry equipment.
  
• Install and repair foundations for operating machinery and principal structures/components of the ships armament.
  
• Install, adjust, set, and repair or replaces various control/regulating or safety devices such as meters, gauges, valves, governors, and automatic alarms. Test or assist in the testing of shipboard machinery pier side or on sea trials to prove satisfactory operation and acceptance.
  
• Use various portable and fixed machine tools such as boring bars, milling machines, facing machines, and drill presses. Use precision measuring instruments such as height gages, depth gages, calipers, verniers, and various types of micrometers, and assists in the use of optical equipment.
  
• Coordinate and arrange for the work of several trades in connection with performing work from information received from technical work documents, blueprints, specifications, and written and/or oral instructions.
  
• Engineer, steam, machinist, installation, marine erector, marine machinist, outfitter, outside-installation machinist Installs ship machinery, for example, propelling machinery, auxiliary motors, pumps, ventilating equipment, and steering gear, working from blueprints and using hand tools, calipers, and micrometers.
  
• Lays out passage holes on bulkheads, decks, and other surfaces for connections, for example shafting and steam lines.
  
• Installs below-deck auxiliaries, for example, evaporators, stills, heaters, pumps, condensers, and boilers, and connects them to steampipe systems.
  
• Tests and inspects installed machinery and equipment during dock and sea trials.
  
• May also set up and operate such machine shop tools as lathe, boring mill, planer, shaper, slotter, and milling machine to fabricate replacement parts.
  

• 
  
• 2nd Shift: Typically 2:30 PM-11:00 PM (varies by department)
  
• 3rd Shift: Typically 10:30 PM-7:00 AM (varies by department)
  

• 
  
• Perform lathe machining from customer/GT drawings with minimal supervision.
  
• Edit and generate machine code; utilize subprograms and edge-break calculations.
  
• Troubleshoot issues, make rapid adjustments, and run multiple lathes concurrently.
  
• Inspect with OGP, Keyence, optical comparator, and other metrology.
  
• Preferred: thermoplastic machining (PBI, PEEK/ARLON, nylon, acetal, UHMWPE, PTFE).
  

• 
  
• Set up and run CNC machining centers; support semi-auto/manual machines and Prototrak lathes.
  
• Edit programs and run more complex geometries (grooves, notches, deep pockets).
  
• Machine thermoplastics and metals.
  
• Assist with programming, first articles, and metrology.
  
• Rotate across milling equipment as needed.
  
• Contribute updated setup info for CNC programming documentation.
  

• 
  
• Build, repair, and maintain molds, dies, fixtures, gauges, cutting tools, cores/sleeves, and elastomer tooling.
  
• Read G-code and operate CNC, manual, and wire EDM equipment.
  
• Perform precision toolroom work: polishing, refinish, flat grinding, thread repair, aligning/diagnosing interlocks, and ensuring form/fit/function.
  
• Lead 5S activities; mentor Tool Maintenance Machinists.
  
• Provide design feedback to Tool Designers to improve manufacturability.
  

• 
  
• Set up and run 5-axis CNC machines to produce complex and prototype components.
  
• Perform program downloads, fixture setup, offset adjustments, and program edits at the machine.
  
• Interpret and apply GD&T.
  
• Complete first articles and all dimensional inspection using CMM/OGP and other devices.
  
• Degate, finish, and visually inspect composite parts.
  

• 
  
• 
  CNC Lathe Machinist: Minimum 1 year of CNC lathe experience in production (setup, troubleshooting, NC program editing).
  
• 
  CNC Mill Machinist: Minimum 3 years of CNC machining center experience (setup, troubleshooting, NC program knowledge).
  
• 
  Toolmaker: Minimum 2 years of tooling experience
  
• 
  Composites CNC Machinist: Experience with 5-axis CNC machining and GD&T; composite machining preferred.
  

• This position requires U.S. Person status as defined by applicable law for authorized access to data controlled under the International Traffic in Arms Regulations (ITAR). A U.S. Person includes U.S. Citizens, U.S. Nationals, lawful permanent residents, and workers granted refugee or asylum status in the United States.

• 
  
• These positions interpret blueprints, sketches, and engineering specifications; determine sequence of operations, number of cuts required and method of setup and arrangement; work with a variety of machinist's hand tools and precision measuring instruments; make shop computations; and fit and put together precision parts and determine material, parts and equipment required.
  
• Fabricates piece parts per work instructions, drawings and specifications through the use of required machine tools. Inspects piece parts per work instruction and drawing requirements. Sets up and operates machine tools.
  
• Performs other related duties as assigned.
  
• Uses, adjusts, cleans and stores the tools, machinery and equipment used.
  
• Keeps records and reports of the use of equipment.
  

• High School Diploma or equivalent and a minimum of 6 years of prior machinist experience or 2 years post. Secondary/Associates Degree with 2 years of prior machinist experience.

• 
  
• Experience as a manual machinist on a conventional lathe and CNC machining in an industrial / manufacturing environment.
  
• A trade school certification or state-licensed Journeyman Machinist certification is strongly desired.
  
• Manual machining experience is preferred.
  
• Working knowledge of setting up the operation of milling machines and lathes.
  
• Working knowledge of engineering drawings, blueprints, production plans and/or work instructions.
  
• Working knowledge performing in-process inspection of finished parts utilizing appropriate inspection and gaging equipment.
  
• Knowledge of industry applicable laws, codes, ordinances and regulations.
  
• Knowledge of machine tools and equipment, machine shop procedures and practices, principals and properties.
  
• Knowledge of basic mathematic principles to solve problems.
  
• The ability to work in a team environment and relate to all levels of employees.
  

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA.

Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.

Position Responsibilities:

• Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
• Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
• Lay-out, plan and sequence machining operation
• Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
• Use shop math, geometry and/or trig to calculate dimensions
• Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
• Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
• Select machine to be used in machining process
• Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
• Write programs as required for multi axis machines
• Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
• Perform minor editing of CNC programs per shop requirements
• Select and check cutting tools per program or CNC documents
• Ensure cutters are the correct type, length, diameter, radius, and are in good condition
• Select machine accessories and holding devises (e.g., chucks, vises, turntables)
• Verify that apparatus is in good condition
• Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
• Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
• Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
• Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
• Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
• Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
• Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
• Maintain personal tool certifications, as required
• Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
• Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

• 1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
• 1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
• Experience reading G and M codes

Preferred Qualifications (Desired Skills/Experience):

• Experience with ENOVIA design tool
• Completed training as a journeyman machinist
• Graduated from an Machinist Apprenticeship program or completed a Machining Certificate

Drug Free Workplace :

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.

Union:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay

Applications for this position will be accepted until Mar. 21, 2026

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.