Test Katie Jobs in Usa

Test Security Specialist (3 Openings)

Location: Remote (closest to EST)

Mode: this is a true, temporary assignment covering peak time (test administration and a leave)

Profile: Experience service/analytics person who has proven experience in investigations, compliance, test security, fraud prevention, risk management, or casework in a regulated environment. Ideal to have call center exposure and investigations experience. Will manage 1500-2000 cases - initially via phone that translates to email and outbound communications as cases mature.

Rate: $45/HR ON W2 Benefits

About the Opportunity

As a Test Security Specialist focused on AP Investigations, you will lead investigations into AP test

security incidents and score validity concerns. You will manage cases end to end by reviewing and

synthesizing evidence such as statistical indicators, test day reports, plagiarism findings, AI-related

reports, and any available supporting documentation or physical evidence. You will apply Client

policies and legal requirements to reach clear, well-supported determinations, including whether

evidence supports score cancellation.

You will also communicate professionally with students, parents, and student representatives, including attorneys, counselors, and educators, to ensure timely case resolution and consistent, accurate policy explanation. This role requires strong judgment, attention to detail, and the ability to manage sensitive situations with fairness and discretion.

In this role, you will:

Case Management (65%)

• Own AP investigation cases end to end from intake through final determination and closure,

ensuring each case is handled thoroughly, consistently, and within required timelines.

• Triage and scope cases by identifying allegation type, applicable policy, key evidence needs, and

any immediate risks or deadlines.

• Collect, review, and synthesize evidence including statistical indicators, test day

documentation, proctor and coordinator reports, seating and timing details (when available),

plagiarism findings, AI-related reports, and any supporting materials submitted by stakeholders.

• Analyze patterns and irregularities using investigative reasoning and data review techniques to

determine whether observed signals are consistent with policy-defined misconduct or score

validity concerns.

• Document investigative work clearly and completely in the case management system, including

evidence summaries, rationale, decision points, and recommended outcomes, to ensure audit?ready and defensible case files.

• Develop case recommendations that align to policy and evidentiary standards, and collaborate

with team leads and peers as needed on complex or high-risk determinations.

• Coordinate cross-functional work with internal partners and external vendors to obtain

evidence, validate reports, and resolve open questions, while protecting confidentiality and

sensitive data.

• Track and report case metrics such as status, aging, throughput, and outcomes, and surface

trends, recurring issues, or process gaps to leadership.

• Support continuous improvement by identifying opportunities to refine workflows, templates,

documentation standards, and investigation playbooks to improve speed, consistency, and

quality.

Customer Service (35%)

• Communicate professionally and empathetically with students, parents, educators, and

student representatives about cases under review, including what is being reviewed, what

evidence is considered, and what steps occur next.

• Draft clear written correspondence that accurately reflects policy, process, and case status,

using a tone appropriate for sensitive situations and escalated concerns.

• Conduct phone calls and written follow-ups to gather additional context, clarify

documentation, and resolve stakeholder questions while maintaining confidentiality and

neutrality.

• Maintain detailed communication records so all stakeholder interactions, requests, and

responses are captured consistently and are easy to reference during review or escalation.

• De-escalate sensitive situations by explaining policies and outcomes diplomatically, setting

expectations, and escalating to leadership or legal partners when needed.

• Help ensure timely resolution by meeting response standards, managing follow-ups, and

keeping cases moving forward without sacrificing quality or policy alignment.

About You

Success Measures

Success in this role will be evaluated by:

• Case throughput and timeliness: Managing an assigned caseload and moving cases from intake

to closure within established timelines, including increased volume during peak periods. Where

applicable, meeting productivity expectations aligned to case complexity and seasonality.

• Quality and audit readiness: Producing complete, accurate, and well-organized case files with

clear evidence summaries and documented rationale that meet audit and documentation

standards.

• SLA adherence: Meeting response and follow-up expectations for stakeholder communications

and internal milestones, including timely documentation of interactions and next steps.

• Decision consistency: Applying policies and evidentiary standards consistently across cases and

escalating complex, high-risk, or ambiguous matters appropriately.

• Stakeholder experience: Communicating clearly and professionally, setting expectations, and

resolving cases with fairness and respect, including effective de-escalation when needed.

• Operational contribution: Identifying recurring issues, trends, and process improvements that

strengthen investigation quality, consistency, and efficiency.

Akkodis is seeking an Electronic Test Technician for a client located at Binghamton NY. This is a 12-month contract Position.

Pay Range: $15 - $25/hour; The rate may be negotiable based on experience, education, geographic location, and other factors

Your Responsibilities will Include:

• Perform a variety of complex technical functions related to the assembly, test and troubleshoot of PCBAs.

• Run Genrad Test and Flying Probe Test Machines.

• Perform troubleshooting of failed PCBAs and PCBAs removed from top level assemblies, to the component level. Utilize assembly prints, mechanical part drawings, schematics, and electronic equipment such as DMMs, oscilloscopes, function generators, power supplies, frequency counters, pressure indicators, etc.

• Effectively perform, document and communicate the results of the failure analysis.

• Depending on focus area, must understand electronic component functionality and interpret and follow electrical schematics or may need the ability to interpret mechanical assembly prints.

• Familiar with Environmental Stress Screening (ESS) testing concepts.

• Proficient in the use of various electronic devices, such as power supplies and meters.

• Assist in the development of production documentation such as work instructions and troubleshoot aids.

• Perform minor repair and maintenance of production and/or test equipment.

• Provide training to production operators and technicians.

• Commitment to customer and business focus in areas such as quality of work, attendance and productivity. Overtime may be required.

• Learn job duties within assigned area; Repair product and contribute toward production goals

• High School Diploma or GED required. AAS in Electrical or Mechanical Engineering Technology desired.

• Two (2) Years prior experience in Production and/or Manufacturing. Experience in the manufacturing/testing/troubleshooting of analog and digital circuits in Aircraft Instruments or other Electronics is desired.

• Effective interpersonal, communication and collaboration skills and abilities to effectively work with others

• Develops and encourages original, creative and successful approaches to issues; continually improves processes; takes smart risks.

• Motivated individual, fast learner, and capable of working independently

• Must have aptitude and the physical abilities to learn soldering and become solder certified

• Must have knowledge of prototype, assembly drawings and blueprint reading.

• Must be able to perform soldering and mechanical assembly of a complex and critical nature that may require an extensive knowledge of techniques, tools, materials, military standards and ISO 9000.

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, please contact Punit Pathak at 61 or

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing is seeking to hire Electronic Systems Design, Analysis, and Test Engineers for current and emerging programs across the St. Louis region, including Berkeley, MO, Hazelwood, MO, St. Charles, MO, and Mascoutah, IL.

This position spans the technology development life cycle, including requirements generation, system design and implementation, integration, and test. As a key member of our team, you will have the opportunity to work on cutting-edge projects, collaborate with cross-functional teams, and contribute to the success of our programs.

Who we are:

• We are curious, creative and explore new ideas that move our company and industry forward.
• Invest in and care for our people, and we treat each other with respect even when we disagree. We feel comfortable raising concerns; we ask for help when needed; and we support our teammates because we can only achieve our shared mission by working together.
• Work with integrity and build trust by consistently meeting our commitments and communication transparently with customers, colleagues and stakeholders.
• We take pride in doing hard work and if we make a mistake, we own it, learn from it, and strive to improve.
• How we think and act each day keeps our people and those who rely on us safe. We take responsibility for our mission to design, build and service complex products with precision and sound decision making.

A leading global aerospace company and top U.S. exporter, Boeing develops, manufactures and services commercial airplanes, defense products and space systems for customers in more than 150 countries. Our U.S. and global workforce and supplier base drive innovation, economic opportunity, sustainability and community impact. Boeing is committed to fostering a culture based on our core values of safety, quality and integrity.

This includes, but is not limited to:

• Air Dominance (AD)
• Phantom Works
• Boeing Global Services (BGS)
• Precision Engagement Systems (PES)
• Boeing Test and Evaluation (BT&E).

Some example products within the portfolios include:

• Fighters (F-15, F/A-18, & F-22)
• F-47
• T-7A Trainers
• MQ-25
• JDAM
• Harpoon

Come join our team and make a career out of making a difference!!

Position Responsibilities:

• Understand and apply job practices, techniques, standards, principles, theories, and concepts
• Develop, document, and maintain electronic and electrical system requirements according to contract requirements and customer feedback
• Develop statement-of-work and technical performance specifications
• Analyze, translate, and implement customer requirements into system architecture, hardware, and software designs and interface specifications, showing traceability throughout the product lifecycle
• Defines test and validation approach to ensure system designs meet operational and functional requirements
• Resolve product integration issues and production anomalies
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements and for potential application to internal business strategies
• Monitor supplier performance to ensure system integrity and compliance with requirements
• Develop and document complex electronic and electrical system requirements
• Design hardware, software, and interface specifications
• Solve problems concerning fielded hardware and software over the entire product lifecycle

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

Potential signing bonus for eligible/qualified external candidates.

Some programs may require domestic and/or international travel.

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.

• A final U.S. Secret or Top-Secret Clearance Post-Start is required.
• Special Program Access or other Government Access Requirements may be required for this position.

Basic Qualifications (Required Skill/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Currently reside in OR willing to relocate to the St. Louis, Missouri region

Preferred Qualifications (Desired Skills/Experience):

• Level 3: 5+ years of related work experience or an equivalent combination of technical education and experience
• Level 4: 9+ years of related work experience or an equivalent combination of technical education and experience
• Experience in the Aerospace Industry
• Experience using good communication, analytical, organizational skills, and demonstrated ability to work in a team environment
• Experience within a design/build or test team
• Experience creating, developing, and/or maintaining engineering processes
• Experience with electronic/electrical system design or test plan development and execution based on requirements
• Strong knowledge of data structures, system design, and architecture

Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range:

Level 3: $107,100 - $144,900
Level 4: 129,200 - $174,800

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Applications for this position will be accepted until Mar. 28, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

**Be visionary**

Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.?

We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins.

**Job Description**

We are seeking a dynamic **Sales Engineer (SE)** to drive business growth for our **Ethernet Test and Analysis Solutions** in the Americas. This individual will be responsible for identifying, developing, and closing sales opportunities for Teledyne LeCroy's **Xena** and **SierraNet** product lines within data center, semiconductor, and networking equipment markets.

The ideal candidate is a technically strong, customer-focused professional with a proven track record selling **Ethernet, Layer 1-3 test, or network analysis equipment** . You'll collaborate closely with Field Application Engineers, Product Management, and global Sales Leadership to meet revenue goals and strengthen strategic customer relationships.

**Key Responsibilities**

+ Develop and execute strategic account plans to achieve sales targets within assigned territory.

+ Engage with design, validation, and test engineering teams at leading semiconductor, system, and network OEMs.

+ Present and demonstrate Teledyne LeCroy's Xena traffic generators, Chimera impairment emulators, and SierraNet analyzers to both technical and executive audiences.

+ Manage the full sales cycle - from lead qualification and technical proof-of-concept to quotation, negotiation, and close.

+ Collaborate with inside sales and marketing teams to build pipeline and drive regional campaigns.

+ Provide customer feedback to Product Management for roadmap alignment and feature prioritization.

+ Represent Teledyne LeCroy at industry events, conferences, and technical workshops.

**Required Qualifications**

+ **Bachelor's degree** in Electrical Engineering, Computer Engineering, or related technical field.

+ **5+ years of experience** in technical sales or applications engineering within the **test & measurement** or **network equipment** industry.

+ Proven experience selling **Ethernet, Layer 1-3 test equipment, BERTs, traffic generators, or analyzers** (e.g., Keysight, Viavi, Spirent, EXFO, etc.).

+ Strong understanding of **Ethernet protocols, PHY/SerDes, and Layer 1-3 technologies** (100G, 400G, 800G, 1.6T).

+ Ability to engage both technically and strategically with engineers, managers, and executives.

+ Excellent communication, presentation, and interpersonal skills.

+ Self-motivated and organized, with the ability to work independently in a regional role.

**Preferred Qualifications**

+ Familiarity with **CMIS, RS-FEC, PAM4, AN/LT, or coherent optics** test methodologies.

+ Existing relationships with key accounts in the **San Francisco** **Bay Area semiconductor or networking ecosystem** .

+ Experience with CRM tools (Dynamics 365 or Salesforce).

**Why Join Us**

+ Be part of a global leader shaping next-generation Ethernet and protocol test technologies.

+ Work with cutting-edge solutions supporting 400G-1.6T, coherent optics, and advanced network architectures.

+ Competitive base salary, uncapped commission, and comprehensive benefits.

+ Collaborative culture with global technical and sales support.

**Salary Range:**

$150,400.00-$200,500.000

**Pay Transparency**

The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position.

Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions.

Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. ?

You may not realize it, but Teledyne enables many of the products and services you use every day **.**

Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Locums, Inc.

is seeking a Physician with a background in GP, FP, or IM for a part-time position overseeing stress tests in a clinic in Charleston, SC.

The clinic provides general, chemical, and nuclear stress tests.

Provider will be needed on-site to oversee the tests and be on hand in case the patient has an adverse response to the test.

Must have valid South Carolina license, ACLS and BLS certifications.

About the Opportunity:- Period of Performance is approx.

ASAP to Ongoing
- Monday through Friday, hours will be according to providers availability
- Compensation will be based on a per-test basis and then move to an hourly rate
- Each test will take approx.

15 minutes- Physician will not have to administer the tests; Primary role is to be in place in the event of an emergency
- Clinic located in West Charleston, SC Requirements:- Active and unrestricted South Carolina Physicians License- Active and unrestricted DEA- BLS certification- ACLS Certification (clinic will assist in obtaining if not already certified)

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing is seeking to hire Electronic Systems Design, Analysis, and Test Engineers for current and emerging programs across the St. Louis region, including Berkeley, MO, Hazelwood, MO, St. Charles, MO, and Mascoutah, IL.

This position spans the technology development life cycle, including requirements generation, system design and implementation, integration, and test. As a key member of our team, you will have the opportunity to work on cutting-edge projects, collaborate with cross-functional teams, and contribute to the success of our programs.

Who we are:

• We are curious, creative and explore new ideas that move our company and industry forward.
• Invest in and care for our people, and we treat each other with respect even when we disagree. We feel comfortable raising concerns; we ask for help when needed; and we support our teammates because we can only achieve our shared mission by working together.
• Work with integrity and build trust by consistently meeting our commitments and communication transparently with customers, colleagues and stakeholders.
• We take pride in doing hard work and if we make a mistake, we own it, learn from it, and strive to improve.
• How we think and act each day keeps our people and those who rely on us safe. We take responsibility for our mission to design, build and service complex products with precision and sound decision making.

A leading global aerospace company and top U.S. exporter, Boeing develops, manufactures and services commercial airplanes, defense products and space systems for customers in more than 150 countries. Our U.S. and global workforce and supplier base drive innovation, economic opportunity, sustainability and community impact. Boeing is committed to fostering a culture based on our core values of safety, quality and integrity.

This includes, but is not limited to:

• Air Dominance (AD)
• Phantom Works
• Boeing Global Services (BGS)
• Precision Engagement Systems (PES)
• Boeing Test and Evaluation (BT&E).

Some example products within the portfolios include:

• Fighters (F-15, F/A-18, & F-22)
• F-47
• T-7A Trainers
• MQ-25
• JDAM
• Harpoon

Come join our team and make a career out of making a difference!!

Position Responsibilities:

• Understand and apply job practices, techniques, standards, principles, theories, and concepts
• Develop, document, and maintain electronic and electrical system requirements according to contract requirements and customer feedback
• Develop statement-of-work and technical performance specifications
• Analyze, translate, and implement customer requirements into system architecture, hardware, and software designs and interface specifications, showing traceability throughout the product lifecycle
• Defines test and validation approach to ensure system designs meet operational and functional requirements
• Resolve product integration issues and production anomalies
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements and for potential application to internal business strategies
• Monitor supplier performance to ensure system integrity and compliance with requirements
• Develop and document complex electronic and electrical system requirements
• Design hardware, software, and interface specifications
• Solve problems concerning fielded hardware and software over the entire product lifecycle

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

Potential signing bonus for eligible/qualified external candidates.

Some programs may require domestic and/or international travel.

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.

• A final U.S. Secret or Top-Secret Clearance Post-Start is required.
• Special Program Access or other Government Access Requirements may be required for this position.

Basic Qualifications (Required Skill/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Currently reside in OR willing to relocate to the St. Louis, Missouri region

Preferred Qualifications (Desired Skills/Experience):

• Level 3: 5+ years of related work experience or an equivalent combination of technical education and experience
• Level 4: 9+ years of related work experience or an equivalent combination of technical education and experience
• Experience in the Aerospace Industry
• Experience using good communication, analytical, organizational skills, and demonstrated ability to work in a team environment
• Experience within a design/build or test team
• Experience creating, developing, and/or maintaining engineering processes
• Experience with electronic/electrical system design or test plan development and execution based on requirements
• Strong knowledge of data structures, system design, and architecture

Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range:

Level 3: $107,100 - $144,900
Level 4: 129,200 - $174,800

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Applications for this position will be accepted until Mar. 28, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Immediate need for a talented Engineering Technician 2/Hardware Test Technician. This is a 12+ months contract opportunity with long-term potential and is located in Franklin, MA(Onsite). Please review the job description below and contact me ASAP if you are interested.

Job ID:26-09007

Pay Range: $25 - $30/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Performs design characterization on all Product Group products.
• Analyzes characterizations for violations of known specifications, potential violations, and overall signal integrity.
• Researches and learns new technologies and procedures to remain current with industry standards and new products.
• Assists tech engineers in diagnosing prototype design flaws.
• Responsible for the planning, coordination, and execution of multiple drive testing in PowerEdge servers
• Analyze data for violations of known specifications, potential violations, and overall test criteria
• Work with the team to analyze issues, implement and validate fixes, and drive those to closure in partnership with our suppliers.
• Troubleshoot and repair systems to the component level.
• Proposes and or implements fixes for any known violations.
• Set up, configure, and test prototype systems and software.
• In addition, assemble and disassemble systems, drives, and DUTs to be tested in servers
• Set up, operate, and calibrate electronic test equipment, and verify its working condition.
• Ability to rack servers, connect cables, and test for functionality
• Assists tech engineers in diagnosing prototype design flaws.
• Data analytics and reporting to higher management and stakeholders

Key Requirements and Technology Experience:

• Skills: “Hardware Testing" or “Storage device testing”, “PowerEdge Servers”, “Calibration”, "Technician".
• Good interpersonal and communication skills
• Be highly motivated and display an ability to work well on one's own initiative
• Have an ability to work under tight deadlines
• Be Flexible
• Knowledge in Storage Technology and HDD/SSD is desired, but not a requirement

Our client is a leading Computer Hardware Manufacturing Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Immediate need for a talented X-Ray Test Technician/ Manufacturing Technician for 2nd Shift. This is a 12-months contract with possibility of Contract-to-Hireopportunity and is located in Troy, NY(Onsite). Please review the job description below and contact me ASAP if you are interested.

Job ID: 26-09161

Pay Range: $21- 22/hr. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities: -

• The X Ray Test Technician is responsible for the loading and unloading of X ray imager panels and fully built detectors into specialized testing equipment.
• This role performs full test cycles to identify defects, irregularities, and performance concerns, and is accountable for accurately documenting and reporting all findings.
• The Technician helps maintain a smooth testing workflow by staying current on assigned test queues and ensuring all equipment and tools are clean, organized, and functioning properly.
• Testing & Inspection
• Load and unload X ray imager panels and completed detectors into designated testers.
• Run full testing cycles according to established procedures.
• Review test results to identify defects, irregularities, and performance deviations.
• Accurately document inspection outcomes and escalate issues as appropriate.
• Reporting & Communication
• Send detailed, professional emails summarizing test results, issues found, and any abnormalities requiring follow up.
• Clearly communicate with engineers, supervisors, and teammates to ensure timely resolution of identified issues.
• Equipment Care & Upkeep
• Perform basic cleaning and upkeep of testing equipment, tools, and workstation areas.
• Notify appropriate personnel of equipment malfunctions or maintenance needs.
• Workflow & Production Support
• Maintain pace with testing schedules and priorities to support production throughput.
• Adapt to shifting priorities based on workload, production demands, and urgent testing needs.
• Collaborate positively within a team environment to meet shared goals.

Key Requirements and Technology Experience:

• High school diploma or GED equivalent required.
• Minimum of 2 years of manufacturing experience.
• Excellent verbal and written communication skills.
• Strong teamwork and collaboration mindset.
• Good time management abilities, including working efficiently and staying organized.
• Ability to shift priorities quickly while maintaining accuracy and attention to detail.
• Comfortable following established processes and documenting results clearly.
• Ability to stand, move, and handle equipment during loading/unloading tasks.
• Comfortable working with testing equipment and within a structured, process driven environment.
• Commitment to safety procedures and proper handling of sensitive components.

Our client is a leading Utility Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

By applying to our jobs, you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

Exciting opportunity! We’re seeking an experienced electrical test technician to join a growing team in Coon Rapids, MN. In this role, you'll perform hands-on electrical testing and troubleshooting of switchgear, relays, and power systems. This is a union position offering excellent benefits, a stable work environment, and opportunities for advancement.

Location: Coon Rapids, MN

Wage: $38.00 – $44.00 per hour

Hours: Monday – Friday, 7:00 am – 5:00 pm

Benefits of the electrical test technician:

• Union role with scheduled pay increases
• Medical, dental, vision, life, disability, and critical illness coverage
• 401(k) with company match
• Three weeks of PTO in your first year
• Opportunities for overtime
• Career advancement paths
• Modern, climate-controlled facility
• Newer, well-maintained equipment
• Company events and a positive work environment
• No history of layoffs – enjoy job stability!

Duties of the electrical test technician:

• Perform testing of electrical equipment, switchgear, and 3-phase power systems
• Conduct factory witness testing
• Assist with redline and schematic updates
• Test relays, circuit breakers, ATS's
• Document test results accurately
• Maintain up-to-date knowledge of electrical codes and safety standards

Requirements of the electrical test technician:

• 2+ years of experience testing electrical equipment and systems
• Ability to read schematics and blueprints
• Understanding of electrical theory, controls, and low/medium voltage systems
• Experience with PLC/HMI preferred, but not required
• Diesel generator power control experience a plus

Additional Information:

Apply today! To learn more about this electrical test technician position, contact Matt at 763-571-7077.

EOE: Twin City Staffing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.