Telegeography Cable Map Jobs in Usa

• 
  
  
• 
  
  Baltimore, MD
  
  
• 
  
  SINAI HOSPITAL
  
  
• 
  
  NUCLEAR MEDICINE
  
  
• 
  
  PRN - Flexible hours - Hours Vary
  
  
• 
  
  ALLIED HEALTH
  
  
• 
  
  91419
  
  
• 
  
  $45.00-$45.00
  
  
• 
  Posted:
  December 16, 2025
  
  

Summary

POSITION SUMMARY: 

Performs all activities of the Department of Nuclear Medicine in accordance with the policies and procedures of the Hospital. Provides excellent customer support by demonstrating the Northwest values of Innovation, Compassion, Accountability and Teamwork. Peforms Nuclear Medicine (NM) procedures using prescribed technique; maintains proficiency on all related equipment. Communicates with various people within the Department and patients, as well as other customers throughout the organization. Performs a variety of support duties to assure smooth operations of the department. Performs all job duties with a focus on safety for the patient, self and co-workers. Follows universal protocol for patient identification and infectious diseases.

• 
  
• Demonstrates the appropriate level of knowledge in all areas of Nuclear Medicine to include injection of radiopharmaceuticals and other pharmacologic agents related to a procedure.
  
• Uses knowledge of patient positioning and other pharmacolic agents related to a procedure.
  
• Evaluates examination to assure technical quality.
  
• Performs daily check of NM equipment to assure preparedness.
  
• Utilizes HIS/RIS to assure proper ordering and completion of NM procedures.
  
• Explains and answers questions concerning NM procedures.
  
• Recognizes priorities and deals with them appropriately.
  
• Process images according to established protocols.
  

REQUIREMENTS: 

• 
  
• Formal working knowledge; equivalent to an Associate's degree (2 years college); requires knowledge of a specialized field
  
• Graduate of a school of Nuclear Medicine
  
• Less than one year of experience
  
• Licensed by the State of MD
  
• Certified by CNMT or ARRT(N) or registry eligible
  

Additional Information

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff.
Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements.

Essential Functions

Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience.

ESSENTIAL FUNCTIONS:Incumbent must have the ability to:

• Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation.
• Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments.
• Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements.
• Provide public assistance at counter and over the telephone.
• Prepare quantity and cost estimates for engineering projects.
• Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes.
• Review engineering plans to determine appropriate layout of construction projects.
• Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades.
• Make and check mathematical calculations related to surveying, drafting and basic engineering.
• Maintain accurate survey records in the form of field notes and sketches.
• Participate in a variety of engineering design and planning work related to municipal engineering projects.
• Answer questions and provide information to the public concerning engineering activities.
• Assist in development and maintenance of the record keeping and filing systems.
• Prepare, assemble and distribute copies of maps, charts and blueprints.
• Answer questions and provide information to the public concerning engineering activities.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of:

Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of:

• Terminology, methods, practices and techniques of drafting.
• Trigonometry as applied to the computation of angles, areas, distances and traverses.
• Elementary surveying techniques and practices.
• Engineering maps and records.

• Perform moderately complex engineering and mathematic calculations with speed and accuracy.
• Understand and follow written instructions and sketches.
• Use and care for drafting, surveying, and mechanical instruments and tools.
• Work independently in the absence of supervision.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more year(s) but less than two (2) years.
  
  
• Two (2) or more years but less than four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six (6) years or more but, less than eight (8) years.
  
  

Required Question

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $34.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 11:30 am – 8:00 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Mobile MT3” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in related field preferred
  
  
• Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team
  
  
• Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Other Service Island support - SBTIII trained - SBT220 within 180 Days
  
  
• Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year
  
  
• Other Tire & Wheel safety - TW220 within 90 Days
  
  
• Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air qualified - (BA220&BA298) within 90 Days
  
  
• Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25)
  
  
• Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days
  
  
• Other A/C recycling/recovery certified - CF609 within 90 Days
  
  
• Other A/C qualified - (AC220&AC298) within 180 Days
  
  
• Other HD electrical trained - DR208 within 90 Days
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Act as a mentor for the Mobile Technician II level
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 5 days ago (3/16/2026 5:33 PM)

Requisition ID 2

Location (Posting Location) : State/Province AL

Location (Posting Location) : City MOBILE

Location (Posting Location) : Postal Code 36618

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000127

Min Pay USD $32.00/Hr.

Max Pay USD $32.00/Hr.

Position Description

Torque by Ryder is immediately hiring a Permanent Full-Time Experienced Mobile Diesel Technician to support our Truck Fleet in Raleigh, North Carolina

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $36.00 per hour based on experience
  
  
• Retention Bonus: $2000 paid every quarter within the first year.
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominiqueor text “Raleigh Mobile” to 9 to speak with your recruiter today.

At Ryder, we offer outstanding benefits:

• 
  
• Generous Paid Time Off
  
  
• Medical, Dental and Vision Insurance effective 30 days from hire date
  
  
• Life Insurance and Disability Insurance Options
  
  
• 401K Savings Plan with Ryder matching contributions
  
  
• Discount on purchase of Ryder Common Stock
  
  
• Employee Discounts on Automotive, Mobile plans, Travel and Hotels
  
  
• Accredited Tech School Tuition Reimbursement
  
  
• PPE & Uniforms provided at no cost
  
  
• Paid Job training and development
  
  
• Employee & Customer Referral Bonus program
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 4 days ago (3/17/2026 4:39 PM)

Requisition ID 2

Location (Posting Location) : State/Province NC

Location (Posting Location) : City RALEIGH

Location (Posting Location) : Postal Code 27616

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $36.00/Hr.

Max Pay USD $36.00/Hr.

Job Title: Electrical Engineer (E3S / Cable Design)

Location: Santa Clara, CA (Onsite)

Experience: 6+ Years

We are looking for an Electrical Engineer with strong E3S and cable design experience to support controller builds and electrical documentation.

Key Responsibilities:

Develop electrical schematics, wiring diagrams, and harness layouts using E3S

Design cables & harnesses (connector selection, wire sizing, routing)

Create fabrication documents: cable charts, wire lists, build instructions

Support controller build activities (wiring, routing, termination, testing)

Work with mechanical teams for electromechanical integration

Troubleshoot wiring issues during prototype/production builds

Maintain documentation and revision control in PLM / ERP systems

Required Skills:

E3S (Electrical Schematic Design)

Cable & Harness Design

Controller Build & Electrical Fabrication

Wiring Diagrams & Electrical Documentation

Plant Design Engineering – Electrical

Project Coordinator – Telecom / HFC Construction

Location: Selma / San Antonio, TX

Employment Type: Full-Time

Industry: Telecom Construction | HFC | Fiber/Coax

Client: Growing Telecom Construction Company Supporting a Major Cable Provider

About the Company

Our client is a rapidly growing telecom construction company supporting a major cable provider with ongoing HFC network construction, maintenance, and upgrade projects across Central Texas. With a strong pipeline of work and expanding field operations, they are seeking a Project Coordinator to support daily activities at their Selma / San Antonio job site.

Position Overview

The Project Coordinator serves as the operational backbone of the construction site. This role is responsible for managing schedules, tracking production, processing work orders, maintaining project documentation, and ensuring strong communication between field crews, the Project Manager, and the client.

The work includes standard (BAU) HFC construction and maintenance, such as:

• Coax/fiber maintenance
• Node splits
• Line extensions
• Service drops
• School and commercial connects
• Small-scale construction projects

This position is ideal for candidates with telecom, cable, or HFC construction experience who thrive in a fast-paced, detail-driven environment.

Key Responsibilities

• Support the Project Manager with daily coordination of HFC construction and maintenance activities
• Track and report daily production numbers, work order progress, crew assignments, and project milestones
• Maintain accurate project documentation including as-builts, daily logs, permits, work orders, and change orders
• Coordinate material deliveries, equipment logistics, and crew scheduling across multiple job sites
• Communicate with field supervisors, subcontractors, and client representatives to resolve scheduling issues and field challenges
• Assist with permit applications, utility locates, and municipal coordination for right-of-way access
• Prepare weekly status reports and production summaries for internal leadership and the client
• Assist with onboarding new field personnel and ensure adherence to safety and quality standards
• Manage work order flow and ensure all documentation is organized, current, and audit-ready

Qualifications

Required:

• 1–3 years of experience in HFC, cable, or telecom construction coordination/administration
• Familiarity with HFC plant construction & maintenance operations (coax, nodes, amps, line extensions, service drops)
• Strong organizational and multitasking skills
• Proficiency in Microsoft Office (Excel, Word, Outlook)
• Experience with work order management systems
• Excellent communication skills with both field and office teams
• High attention to detail for documentation and production tracking
• Valid driver’s license and ability to visit job sites around the San Antonio area

Preferred:

• Experience working with or for a major cable MSO (Spectrum, Comcast, Cox, etc.)
• Experience with production reporting or construction documentation
• OSHA 10 certification (or willingness to obtain)

Why Join?

• Work with a growing company supporting major telecom infrastructure
• High-impact role with daily interaction across field and leadership teams
• Opportunity to grow within HFC, fiber, and telecom construction operations
• Stable, ongoing project workload

Work Shift: 2nd Shift 3:00pm - 12:30am

Travel: None

Client is seeking Harness Technicians – Level 2 & 3 – to join our team of qualified, diverse individuals in Gilbert, AZ supporting Manufacturing. This is a 2nd Shift Position. Working Hours are 3:00pm – 12:30am on a 9/80 schedule.

Embark on a career putting innovative, reliable, and agile products and ideas into orbit, and beyond. Client has opportunities waiting for you that play a vital role in human space exploration, national defense, and scientific discovery, supporting multiple programs across the universe. With us, you’ll discover a culture of curiosity and collaboration that will have you Defining Possible from the day you start. Our space work connects and protects millions of people on earth every day, now and for the future. Explore your future and launch your career today.

This position entails the fabrication and assembly of complex Space flight cable and harnesses assemblies from drawings, schematics, wire lists, or engineering sketches in conformance with government specifications and workmanship standards. Assembly is performed in a professional atmosphere in an ESD and FOD awareness area. Regular use of soldering iron, tweezers, heat guns, and other common hand tools.

Candidates will complete a Hands-On Skills Assessment, demonstrating technical proficiency to perform required job duties.

Roles and Responsibilities:

• Obtain all necessary information to perform job assignments and report any discrepancies to appropriate personnel.

• Read and interpret schematics and wiring diagrams to perform point-to-point assembly, where assemblies and subassemblies require wiring and soldering of large masses of wires in confined spaces.

• Following appropriate wiring diagram, perform wiring using harness boards, tie-in cables and harnesses.

• Perform electrical/electronic and mechanical assembly tasks working alone or as a member of an assembly team as assigned.

• Lay out and construct harness boards to assemble and form wiring and cables for a wide variety of electrical/electronic and mechanical assemblies and subassemblies.

• Mix and apply bonding components and encapsulate.

• Use and operate a broad range of hand tools and assembly equipment to perform tasks.

• Maintain equipment and work area in a clean and orderly condition.

Basic Qualifications for Level 2 Harness Technician:

• High School Diploma or GED plus a minimum of 3 additional years of education and/or relevant experience in assembly, electronics, manufacturing, production or logistics.

• A minimum of 2 years of experience in electrical assembly and wiring.

• Must be capable of successfully completing Certification to IPC WHMA-A-620 (Cable and Wire Harness Assembly) and NASA-J-STD.

• Experience reading drawings and wiring diagrams.

Basic Qualifications for Level 3 Harness Technician:

• High School Diploma or GED plus a minimum of 6 additional years of education and/or relevant experience in assembly, electronics, manufacturing, production or logistics.

• A minimum of 5 years of experience in electrical assembly and wiring.

• Must be capable of successfully completing certification to IPC WHMA-A-620 (Cable and Wire Harness Assembly) and NASA-J-STD.

• Experience reading drawings and wiring diagrams.

• Exceptional mechanical/electrical aptitude.

• ESD (Electro-Static Discharge) and Crimping Experience.

• Proficiency with Microsoft Office applications.

Preferred Qualifications:

• Graduate from Technical Trade School

• Current certification to IPC WHMA-A-620, NASA-J-STD; or other certifications in electronics assembly and workmanship.

• Experience with MES applications including workflow, signoff and documentation.

NOW HIRING: Low Voltage Technicians

San Antonio, TX

$17 – $27 per hour

Eco Staff is seeking experienced Low Voltage Technicians to join our client’s growing team in San Antonio, TX. If you have experience with structured cabling, security systems, access control, CCTV, or AV systems, we want to hear from you!

What You’ll Do

• Install, terminate, and test low-voltage cabling (Cat5e, Cat6, Fiber)

• Install and configure voice & data, security systems, access control, CCTV, and audiovisual equipment

• Install cable trays, ladder racks, conduit pathways, and cabling infrastructure

• Perform IDF/MDF room build-outs including labeling, termination, and testing

• Troubleshoot and repair low-voltage systems

• Read and interpret blueprints, schematics, and technical diagrams

• Ensure work meets industry and safety standards

• Work independently or with a team on commercial and residential projects

What We’re Looking For

• Proven experience in low voltage installations and build-outs

• Strong skills in cable termination, testing, and troubleshooting

• Familiarity with power tools and mechanical systems

• Valid driver’s license & reliable transportation

• Ability to lift up to 50 lbs and work on ladders/lifts

Preferred Certifications

OSHA 10/30 | Aerial/Scissor Lift | BICSI

Must be able to pass a background check and drug screening

Interested or know someone who is?

Comment below, send me a message, or apply today!

hashtag#SanAntonioJobs hashtag#LowVoltage hashtag#StructuredCabling hashtag#TelecomJobs hashtag#NowHiring hashtag#ConstructionJobs hashtag#AVJobs

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Location: Must live in the Washington DC - VA area.

What You'll Do:

• 
  
  
• Perform structured cabling installation: pull, terminate, label, and dress cables per project documentation and standards.
  
  
• Complete physical installation and wiring of AV devices (displays, speakers, microphones, cameras, control interfaces, etc.).
  
  
• Assemble, populate, and dress equipment racks with a high degree of workmanship and adherence to design documents.
  
  
• Solder and terminate connectors according to project specifications and accepted industry practices.
  
  
• Execute light physical construction tasks as required (e.g., blocking, mounting surfaces, hardware installation).
  
  
• Follow Diversified's installation procedures, quality guidelines, and safety protocols with minimal deviation.
  
  
• Maintain accurate daily records: timesheets, daily field reports, checklists, and as-built documentation.
  
  
• Collaborate effectively with Project Managers, Engineers, and Lead Technicians to ensure project milestones are met.
  
  
• Represent Diversified professionally on active job sites, including client and construction environments.
  
  
• Actively participate in ongoing training and skill development toward advancing technical proficiency.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

What You'll Bring:

Education/ Certifications:

* High school or GED equal
* AVIXA CTS Certification is desired.
* Must have a valid drivers license and adhere to our insurance requirements
* OSHA 30 Certificate is highly desired. (NYC OSHA30 is desired)
* Other relevant certifications may be required or preferred based on the technology focus of the position.

Required Skills/Qualifications:

• 
  
  
• 1+ years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Proven ability to perform core AV installation tasks with minimal direct instruction.
  
  
• Competency with hand tools, power tools, and installation materials required for AV integration.
  
  
• Strong understanding of cabling types, termination techniques, and device mounting requirements.
  
  
• Ability to interpret functional design drawings, cable riser diagrams, and architectural drawings.
  
  
• Comfortable working on ladders, lifts, and in construction environments.
  
  
• Strong work ethic, attention to detail, and commitment to quality workmanship.
  
  
• Effective communication skills and ability to collaborate within a project team.
  
  
• Flexibility and adaptability to evolving site conditions and project priorities.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.