Technical Maintenance Inc Jobs in Usa

Ray Therapeutics mission is to restore vision to people with retinal degenerations. RayTx is using a novel bioengineered optogenetic protein optimized for human vision delivered by AAV to restore visual function in a mutation agnostic approach and without the need for light enhancing eyewear. The company is developing its lead candidate RTx-015 in retinitis pigmentosa, a degenerative retinal disease with significant unmet medical need as well as a pipeline to treat both rare and large market indications.

We are currently seeking an exceptional team member to join our team as a CMC Technical Development Specialist. This role will report to the Senior Director, CMC Analytics, and will have an active role supporting the general CMC department as well as our process, product management, and MSAT teams. The position requires hands on support for AAV analytical development, transfer, and qualification through validation support for our lead candidates from Pre-IND to BLA. The role is based in the Berkeley, CA office with a hybrid work from home/in office requirement and may require travel to our external vendors at in the United States. If the lab is where your curiosity comes alive and breakthroughs spark your excitement, this position may be right for you.

The job duties and responsibilities include but is not limited to the following:

• Collaborate with analytical development and process development teams to develop, qualify and/or validate AAV gene therapy assays.
• Develop analytical methods and support method optimization/characterization.
• Independently execute analytical assays including molecular biology assays, chemical/biochemical assays, and cell-based biological potency assays, for internal CMC commitments, process monitoring, release and stability.
• Develop protocols for analytical transfer, qualification and /or validation studies and execute associated wetlab work.
• Present aasay methodology and principles to external partners and support method transfers.
• Execute routine assays with high presicion and provide data summaries and reports in a timely manner.
• Document all raw data, method plans, and summarize conclusions.
• Author and review Test Methods, Reports, and Protocols.
• Work in the lab independently and in a collaborative environment with minimal guidance.
• Support CMC outside of analytical teams to move programs forward, e.g. shelf-life determination, upstream characterization etc.

Qualifications and Experience:

• BA/BS in Biochemistry, Biology, bioengineering or a related fields and at least 10 years of Biotech/pharmaceutical industry experienced required.
• Experienced in compendial methods, CE-SDS, gel electrophoresis, HPLC, DLS, ddPCR or qPCR, ELISA, and cell based potency assays.
• Hands on experience in AAV gene therapy analytical methods and testing required.
• Experience in precision pipetting and cell culture (handling, aseptic techniques, maintenance), plate-based imaging, ELISAs, luminescence and fluorescence detection techniques.
• Curiosity and good scientific knowledge and acumen.

Compensation Range and Benefits:

• For this role, the anticipated base salary range: $145,000 to $160,000, based on the candidate's professional experience level. The final salary offered for this position may take into account a number of factors including, but not limited to skills, education, and experience.
• Ray Therapeutics also offers annual performance-based bonus, annual equity awards and a comprehensive benefits package.

At Ray Therapeutics, we celebrate diversity and are committed to creating an inclusive environment for all employees; providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law.

All employment is decided on the basis of qualifications, merit, and business need.

Search Firm Representatives Please Read Carefully

Ray Therapeutics does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. Please, no phone calls or emails.

Miller International is seeking a skilled, dependable Property Maintenance Technician to ensure optimal functionality, safety, and appearance of our company-owned and leased properties. This role is responsible for conducting thorough inspections, performing necessary repairs and maintenance, and installing equipment and appliances to support daily operations.

The ideal candidate is hands-on, detail-oriented, safety-focused, and takes pride in maintaining a well-functioning and professional environment.

At Miller International, our employees enjoy a fun, casual, laid-back atmosphere. If you have maintenance experience and are looking for an opportunity to contribute to a dynamic and growing organization, we’d love to hear from you.

Salary: $25 - $30 Per Hour

• Minimal weekend work (rarely required)
• On-call responsibilities are rare
• Company-provided work truck for travel between properties

As a Property Maintenance Technician, you would be responsible for:

• Conducting regular inspections of buildings, grounds, and equipment to identify maintenance needs and potential issues
• Perform repairs and maintenance tasks promptly and efficiently, including plumbing, electrical systems, HVAC, and general building maintenance
• Install new equipment and appliances, ensuring proper functionality and compliance with safety standards
• Adhere to local and state building codes and regulations in all maintenance and repair activities
• Comply with all company safety regulations and utilize proper safety equipment and practices
• Maintain accurate records of maintenance activities, repairs, and equipment installations
• Respond promptly to emergency maintenance requests that may impact safety or property operations
• Communicate effectively with property management regarding maintenance needs and completed work
• Perform landscaping and grounds maintenance tasks as needed to maintain curb appeal and overall property appearance
• Other duties may be assigned

Requirements:

• High school diploma or equivalent required; vocational training or certification in property maintenance preferred
• Proven experience as a Property Maintenance Technician or similar role
• Working knowledge of plumbing, electrical systems, HVAC, and general building maintenance
• Familiarity with local and state building codes and regulations
• Strong troubleshooting and problem-solving skills
• Ability to safely and effectively use hand and power tools
• Ability to lift up to 50 pounds and perform physically demanding tasks
• Strong communication and interpersonal skills
• Experience with equipment installation preferred

Interested Yet?

Miller International offers competitive pay, a comprehensive benefits package, and a supportive, team-oriented work environment. We value work-life balance and strive to create a workplace where employees feel respected and appreciated.

We offer a comprehensive benefits package that includes:

• Health, dental, and vision coverage for employees and their families
• Retirement savings plan with company match
• Paid time off, including vacation and sick leave
• Employee wellness and assistance programs
• Optional supplemental benefits, such as life, disability, and other voluntary coverage
• Educational support programs, including tuition reimbursement and student debt assistance

Our success is built on the shoulders of our dedicated and loyal staff – and we only employ the best! We pride ourselves on a rich history spanning over 100 years, one that embodies the traditions of hard work, distinction, and providing unsurpassed quality products to our customers. Since 1918, Miller International has matured and consistently evolved to become what it is today: One of the most successful privately owned Companies in the Western Industry, whose brands continue to gain impressive popularity and growth. We do it by treating each other with respect, and we do it all as a team that feels more like a family. At Miller, we are guided by our Core Values and use them to measure the appropriateness of our decisions, whether with vendors, customers, or employees. The Core Values were created and approved by our employees as a commitment to being part of a company guided by these principles.

If you’re ready to bring your skills to a company that values craftsmanship, teamwork, and long-term growth, we encourage you to apply.

We can’t wait to hear from you!

Check us out at: Deadline: 4/9/2026

Large International Manufacturing company located in the Rockfish NC area is looking for a Maintenance / Reliability Leader

JOB DUTIES

• Responsible for the development and implementation of a comprehensive Maintenance / Reliability Strategy’s (including functional goals and a financial plan by using the full breadth of maintenance and reliability work processes, best practices, tools, and effective leveraging of resources.
• Serves as the Maintenance Work Process / discipline owner and administrative resource leader.
• The Maintenance / Reliability Leader is responsible for safety, reliability, and cost management.
• Acts as the Maintenance Process owner and is responsible for process execution, improvement, sustainability, and results.
• Ensures Maintenance and Reliability principles are integrated into new projects.
• Responsible for tracking and analyzing Reliability metrics / data (e.g. asset utilization, PM compliance, PPM data, etc.) and updating strategies based on results.

Required:

• 6+ years experience as a maintenance or reliability engineer operating within a manufacturing facility.
• 2+ years of demonstrated leadership experience as a Champion for change.
• Proven track record of project management experience, and leading cross-functional project management groups.
• Detailed knowledge of maintenance work process (planning, scheduling, logistics, etc.)

Soar with us at Wawa.

We believe we can make life a little better every day one smile, hoagie, or experience at a time. And theres one secret ingredient that truly sets Wawa apart: Our Associates. At Wawa, youll be part of a caring team thats dedicated to helping all of us fly high together. Were team players, day-brighteners, and go-getters: and we know that Wawa is a place where we can build skills to thrive and open doors to new career opportunities. Were proud to be a part of a winning team of Associate owners who shape our success. Were committed to helping our communities and one another at every turn, because we know that when we fly together, theres no limit to how far we can go. Ready to be part of a team that helps you reach new heights? Join our flock and get ready to soar.

Job Description

Compensation: $24.50 based on experience

Job Summary: The Technician 20 is responsible completing repairs and maintenance at assigned stores and identifies further recommended actions.

Principal Duties:

• Perform specific store repairs, installation, replacement, and maintenance tasks as assigned through the Asset Management System such as (but not limited to) carpentry, minor plumbing (filter changes, water treatment PM, clogs, fixture and sensor replacements), interior and exterior painting, dry wall, tiling, light bulbs, counter tops and cabinets. Ensure repairs are completed within a time specified by priority codes for approximately 10 to 15 primary assigned stores, but not limited to, when special business needs dictate. If the position is located in Florida, additional duties may include fuel pump nozzle and hose replacements).

• Visit all stores in their assigned areas on a scheduled basis to keep the assigned equipment clean and in good operating condition. This includes beverage equipment monthly and semiannual HVAC and refrigeration PMs. Plan daily routes that are efficient and cost effective.

• Prepare and coordinate store for remodel, openings, and project work as specified by the Lead Technician. Support Public Relations during opening celebrations.

• Maintain the integrity of the asset tagging system including tag audits, transferring assets and setting up assets in new and remodeled stores.

• Maintain and report all necessary paperwork and electronic communication as determined by the Lead Technician Supervisor in a prompt, orderly and timely manner, which includes invoicing and payroll documents.

• Notify the Lead Technician when company standards are not being met by internal or external service providers. Performs other duties requested by Lead Technician when the business need dictates it.

Essential Functions:

• Ability to work well individually as well as in a team environment
• Excellent communication skills, written and oral
• Excellent customer service skills
• Must maintain a valid drivers license and car insurance
• Must be able to work independently, with little or no supervision
• Ability to occasionally lift/push/pull/carry up to 72 lbs
• Ability to frequently lift/push/pull/carry up to 40 lbs
• Ability to climb and perform various functions on a ladder at a height of approximately 30 feet.
• Must be able to perform the following physical actions repetitively and for long periods of time: standing, crouching, bending, reaching above the shoulders, reaching below the waist, reaching horizontally, squatting, climbing, kneeling, pushing, pulling, and grasping firmly.
• Requires extensive travel, 5 days per week and will include evening and weekend hours
• Ability to successfully complete the Technician 20 skills test
• Obtain training certifications as required

Basic Qualifications:

• High School diploma or GED, preferred
• 3+ years of experience as a General Craftsman

Wawa will provide reasonable accommodation to complete an application upon request, consistent with applicable law. If you require an accommodation, please contact our Associate Service Center at

Wawa, Inc. is an equal opportunity employer. Wawa maintains a work environment in which Associates are treated fairly and with respect and in which discrimination of any kind will not be tolerated. In accordance with federal, state and local laws, we recruit, hire, promote and evaluate all applicants and Associates without regard to race, color, religion, sex, age, national origin, ancestry, familial status, marital status, sexual orientation or preference, gender identity or expression, citizenship status, disability, veteran or military status, genetic information, domestic or sexual violence victim status or any other characteristic protected by applicable law. Unlawful discrimination will not be a factor in any employment decision.

Required

Preferred

Job Industries

• Other

Job Title - Maintenance Technician -

Work Location - Hercules, CA - 7 AM to 3.30 PM - Monday to Friday

Pay - $42 - $45/hour

We are seeking senior Facilities / Utilities Maintenance Technicians to support a regulated manufacturing site during a potential labor disruption. Technicians will maintain and troubleshoot facility and utility systems supporting production and controlled environments, ensuring safe, compliant, and continuous operations. Candidates may come from electrical or mechanical backgrounds but must have strong experience with industrial utilities and building automation systems in GMP or cGMP environments

How You'll Make An Impact:

• Perform preventive and corrective maintenance on facility and utility systems supporting manufacturing operations.
• Troubleshoot and maintain electrical, mechanical, and pneumatic systems serving production and control rooms.
• Support building automation and monitoring systems, including Siemens APOGE, Assent Compass, Lab Watch, and Rees.
• Maintain utilities including CDA, nitrogen, chilled water, cooling water, hot water, steam, pure steam, RODI water, refrigeration, wastewater, and exhaust systems.
• Install replacement parts and new equipment per safety, engineering, and GMP requirements.
• Perform daily equipment rounds, record readings, and complete documentation.
• Maintain accurate CMMS documentation including work orders, job plans, and spare parts.
• Support audits, inspections, investigations, CAPAs, and change controls.
• Ensure electrical work complies with NFPA 70E, NFPA 70B, NEC, and IEEE standards.
• Coordinate and oversee outside contractors.
• Respond to after-hours or emergency service calls as required.

What You Bring:

• High school/trade school diploma, GED, or equivalent (e.g., ITC/NTC and above). Associate degree in electrical or mechanical field preferred
• 6–10 years of Facilities / Utilities Maintenance experience
• Experience in pharmaceutical, medical device, food processing, or other GMP/cGMP-regulated environments
• Hands-on experience supporting production-critical utilities
• Building Automation Systems (BAS) experience; Siemens APOGE strongly preferred
• Strong troubleshooting skills and ability to work independently
• Preferred / Value-Add Skills
• PLC troubleshooting experience (programming not required)
• Freeze-dryer / lyophilization support experience
• Universal Refrigeration Technician certification
• Experience supporting shutdowns, startups, or high-pressure operational environments

Company Description

C-B Gear & Machine, Inc. has been delivering high-quality gear systems and services at competitive prices since 1952. With in-house engineers, the company specializes in new gear design, reverse engineering, custom turnkey projects, and precision bevel gears. Their gearbox repair team brings decades of experience in reconditioning, repairing, and rebuilding various gearboxes. As a recognized “heavy-duty” gear producer, C-B Gear serves industrial markets such as petrochemical, refining, oil & gas, power, asphalt, cement, pulp & paper, and steel. Operating out of Houston, TX, the company proudly serves clients both nationwide and internationally.

Key Responsibilities

Sales, Quoting & Customer Support

• Prepare and issue quotations for gear manufacturing, gearbox repair, and related machining services.

• Respond to customer inquiries regarding gear manufacturing, gearbox repair, and machining capabilities.

• Communicate pricing, lead times, and scope of work to customers.

• Follow up on quotations to secure orders and maintain customer relationships.

• Coordinate with customers regarding project requirements, schedules, and technical questions.

• Maintain ongoing relationships with customers and support repeat business.

⸻

Technical Review

• Review customer drawings, specifications, and gearbox assemblies to determine scope of work.

• Advise customers on manufacturability and repair options.

• Assist customers in identifying replacement gears or gearbox repair solutions.

• Evaluate gearbox failures and recommend repair approaches when required.

⸻

Estimating & Job Planning

• Develop manufacturing routers and job travelers for production.

• Determine machining processes required (turning, hobbing, shaping, grinding, heat treat, etc.).

• Estimate labor hours, materials, and subcontract services.

• Work with engineering and production to confirm manufacturing feasibility.

⸻

Documentation & Reporting

• Prepare gearbox inspection and failure analysis reports when required.

• Maintain records of quotes, job specifications, and technical communications.

• Ensure proper documentation is available for production and quality control.

⸻

Required Skills

• Strong understanding of gear manufacturing and gearbox repair

• Ability to read and interpret engineering drawings

• Experience preparing manufacturing quotes and estimates

• Knowledge of machining processes and gear terminology

• Strong customer communication and sales skills

• Ability to translate technical requirements into manufacturing scope.

Wayne J. Griffin Electric, Inc., is a leading electrical contractor headquartered in Holliston, MA. We take pride in our exceptional training programs and are looking to add to our experienced training team to support the curriculum development of our Apprenticeship Training Program and be involved in developing and presenting technical training to support Career Development efforts. Our unwavering commitment to deliver superior workmanship is directly related to the value we place on cultivating highly skilled craftspeople and professionals in a collaborative, team-based environment. Our in-house Apprenticeship Training Program which is state and federally approved has been in place for over 30 years, and we are proud of the number of individuals who have become highly qualified electricians and telecommunication technicians as a result of their training here.

The Technical Training Specialist position requires organizational skills, attention to detail, and strong project management skills to create and oversee the curriculum development for all levels of the program.

Responsibilities include:

• Creating and maintaining the curriculum for all levels of the apprenticeship training program for both the classroom and hands on facility in compliance with NCCER, state and federal accreditation standards, and current National Electrical Code standards.
• Developing syllabi, guidelines, and procedures and maintaining them in our computer systems
• Coordinating in-house technical trainings & professional development such as fire alarm, motor controls, and OSHA 10 training
• Assist with instructor workshop and open house, annual apprentice competition, and other events.

The ideal candidate is an enthusiastic, motivated individual who is passionate about creating curriculum for the development of our 400 apprentices so they can obtain their journeyperson license or become a telecommunications technician as well as technical training to further promote professional development. Candidates should have an Electrical License with prior teaching and/or curriculum experience and demonstrated computer skills.

We offer excellent benefits including Blue Cross Blue Shield PPO (medical and dental), life insurance, 401(k) with company match, tuition reimbursement of up to $2,000/year, onsite gym with health and wellness programs.

Visit us at our website: to learn more. We make it a priority to offer education and professional training opportunities, so that all employees are equipped to advance in their careers and uphold the company’s motto “Work with the Best, Be the Best.”

Please send your resume to: