Stripe Senior Software Engineer Interview Experience Jobs in Usa

Northrop Grumman’s Space Sector is seeking a Senior Staff Systems Engineer to serve as an Engineering lead for a space mission payload critical to our nation to join our team in Dulles, VA. This position is 100% onsite and cannot accommodate telecommute work.

This role includes Engineering and project management through all phases of the program, from concept development and industry trade study preliminary and detailed design, payload integration & test, space vehicle integration and test and potentially on-orbit demonstration.

This position will work a 9/80 schedule, with every other Friday off.

Your mission, should you choose to accept:

• Functioning as the primary payload interface for customers, program management, product line engineering leadership, mission assurance and subsystem engineering teams
• Providing Technical Support / Oversight including
  • Conducting technical trades in coordination with the Mission and Space Vehicle SE teams
  • Ownership of payload specs and requirements traceability 
  • Developing and managing Interface-Control Documents (ICD) between the prime and sub-contractor
  • Playing a key role in major program milestone and readiness reviews
  • Planning, design, and execution of testing strategies to ensure payload qualification, exercise payload functionality and measure performance
  • Supporting the development of operational mission scenarios and payload concepts of operations

• Payload sub-contractor oversight, including cost and schedule performance including
  • Review / Tech Eval of subcontractor proposals
  • Cost account manager (CAM) for Payload WBSs using EVMS
  • Recognizing and mitigating payload related issues and risks

If this job description reads like it was written specifically for you, consider joining our team!

This position is contingent upon the candidate obtaining final clearances and program access(es) within a reasonable period of time as determined by the company.

Basic Qualifications:

• Bachelor’s degree with 14 years of professional experience – OR – Master’s degree with 12 years of professional experience – OR – PhD with 10 years of professional experience
• Requires an active Top-Secret/Sensitive Compartmented Information (SCI) clearance at time of application
• Experience working medium size or larger Government programs
• Experience in managing sub-contractors
• Knowledge of aerospace environmental testing standards
• Experience with spacecraft design, development integration and test
• Experience with payload integration inclusive of ICD development

 Preferred Qualifications:  

• 15+ yrs of direct experience with Space systems
• Established network of contacts in other NG divisions/sectors/programs
• Proposal experience
• CAM experience

Curious about all the exciting developments with the Northrop Grumman Space Sector? Click the link below:

NOVASPACE

Project description

This technology engineer is responsible for ensuring the reliability, supportability, and continuous improvement of key infrastructure monitoring and management platforms, with primary ownership focus on tools such as SolarWinds, Azure Sentinel. This role requires a developer mindset. This person will also be providing operations systems administration support for hands on Linux and Windows systems. This role partners closely with internal teams across operations, monitoring, and security to strengthen platform health, improve signal quality, and enable effective incident response workflows. The engineer will support a hybrid environment with strong emphasis on Microsoft Azure monitoring and logging, contribute to platform lifecycle activities (patching, upgrades, onboarding, documentation), and continuously learn and apply modern capabilities— including analytics and emerging AI features—across event management, observability, and SIEM tooling to reduce operational friction and increase time to value

Responsibilities

Platform Ownership

Network & Monitoring Tools (must have)

Familiar with tools such as SolarWinds (including NetPath). As a platform owner, ensure platform stability, upgrades, patching, and day to day support.

Has knowledge about network centric monitoring capabilities including SNMP polling, traps, and device visibility etc. Ensure new sites and devices are properly onboarded

Partner with platform and cloud teams to ensure migrated workloads meet monitoring standards. Systems Administration (must have)

Provide sysadmin support for Linux and Windows servers, including:

Agent deployment and upgrades (SolarWinds, Datadog, Dynatrace)

OS level troubleshooting and configuration

Monitoring and logging enablement

Support hybrid environments spanning on prem and Azure infrastructure.

A developer mindset with experience in Dev workflow, GitHub, PowerShell etc.

Observability & Event Management Support (should have)

Has experience with tools such as Datadog and Dynatrace. The person will be responsible for collaborating with platform owners to support integrations, data quality, and alerting hygiene.

Assist with event management workflows, ensuring alerts are actionable and routed correctly.

Participate in efforts to reduce alert noise and repeat incidents. SIEM & Security Visibility (nice to have)

Develop a working understanding of SIEM concepts and platforms such as Azure Sentinel and CRIBL.

Support log ingestion, troubleshooting, and collaboration with security and incident response teams.

Ensure infrastructure and network telemetry supports security detection requirements. Cloud Monitoring & Azure Integration (should have)

Has experience with Azure cloud platform. Have either directly supported or is familiar with Azure based monitoring and logging, including:

Azure Monitor and Log Analytics integrations

Observability for Azure hosted workloads Automation, AI & Continuous Improvement (nice to have)

Explore and apply AI assisted features within monitoring, event management, and SIEM tools to:

Improve signal quality / reduce alert fatigue

Support faster incident triage

Contribute to documentation, runbooks, and operational improvements focused on small, incremental wins.

Knowledge Transfer & Operational Resilience

Participate in knowledge transfer activities related to platform transitions and retirements. Maintain documentation.

Support on call or escalation rotations as needed.

Skills

Must have

Minimum 4-5 years of experience in infrastructure operations, monitoring, observability, or platform operations roles, supporting enterprise environments

Hands on experience with systems administration for Linux and Windows servers, including troubleshooting, configuration, and deployment of monitoring or management agents (e.g., SolarWinds, Datadog, Dynatrace).

Foundational networking knowledge, including concepts such as SNMP, network monitoring, LAN/WAN fundamentals, firewalls, and telemetry collection, sufficient to support network centric monitoring platforms like SolarWinds

Not a must but nice to have experience with platform like StruxureWare.

Experience with observability or monitoring platforms, such as SolarWinds, Datadog, Dynatrace, or similar tools, with an understanding of alerting, dashboards, and signal quality.

Exposure to cloud environments, preferably Microsoft Azure, including familiarity with monitoring and logging concepts (e.g., cloud based telemetry, logs, metrics, and integrations).

Basic understanding of incident and event management practices, including alert triage, escalation, and collaboration with incident response or operations teams.

Demonstrated willingness and ability to learn new technologies quickly, with examples of picking up new platforms, tools, or domains outside of prior core expertise.

Familiarity with Agile or SAFe ways of working, including collaboration in sprint based delivery models, and cross functional team engagement is a plus.

Strong communication and collaboration skills, with the ability to work effectively with platform owners, operations teams, security teams, and external stakeholders.

Experience working in a modern Dev workflow using GitHub (branches, pull requests, code reviews, and CI/CD) to manage and deploy scripts/automation used for platform operations

Working proficiency in scripting languages such as PowerShell, Python, BASH, or similar scripting languages.

Knowledge with Azure, Azure Active Directory (AD), and hybrid cloud environments is a plus.

Exposure to SIEM concepts or platforms such as Azure Sentinel, CRIBL, or similar is a plus.

Experience with change management practices in an enterprise IT environment is beneficial

This technology engineer is responsible for ensuring the reliability, supportability, and continuous improvement of key infrastructure monitoring and management platforms, with primary ownership focus on tools such as SolarWinds, Azure Sentinel. This role requires a developer mindset. This person will also be providing operations systems administration support for hands on Linux and Windows systems. This role partners closely with internal teams across operations, monitoring, and security to strengthen platform health, improve signal quality, and enable effective incident response workflows. The engineer will support a hybrid environment with strong emphasis on Microsoft Azure monitoring and logging, contribute to platform lifecycle activities (patching, upgrades, onboarding, documentation), and continuously learn and apply modern capabilities— including analytics and emerging AI features—across event management, observability, and SIEM tooling to reduce operational friction and increase time to value.

Responsibilities:

Platform Ownership - Network & Monitoring Tools (must have)

• Familiar with tools such as SolarWinds (including NetPath). As a platform owner, ensure platform stability, upgrades, patching, and day to day support.

• Has knowledge about network centric monitoring capabilities including SNMP polling, traps, and device visibility etc. Ensure new sites and devices are properly onboarded

• Partner with platform and cloud teams to ensure migrated workloads meet monitoring standards.

Systems Administration (must have)

• Provide sysadmin support for Linux and Windows servers, including:

• Agent deployment and upgrades (SolarWinds, Datadog, Dynatrace)

• OS level troubleshooting and configuration

• Monitoring and logging enablement

- Support hybrid environments spanning on prem and Azure infrastructure.

- A developer mindset with experience in Dev workflow, GitHub, PowerShell etc.

- Observability & Event Management Support (should have)

- Has experience with tools such as Datadog and Dynatrace. The person will be responsible for collaborating with platform owners to support integrations, data quality, and alerting hygiene.

- Assist with event management workflows, ensuring alerts are actionable and routed correctly.

- Participate in efforts to reduce alert noise and repeat incidents.

SIEM & Security Visibility (nice to have)

- Develop a working understanding of SIEM concepts and platforms such as Azure Sentinel and CRIBL.

- Support log ingestion, troubleshooting, and collaboration with security and incident response teams.

- Ensure infrastructure and network telemetry supports security detection requirements.

Cloud Monitoring & Azure Integration (should have)

- Has experience with Azure cloud platform. Have either directly supported or is familiar with Azure based monitoring and logging, including:

- Azure Monitor and Log Analytics integrations

- Observability for Azure hosted workloads

Automation, AI & Continuous Improvement (nice to have)

• Explore and apply AI assisted features within monitoring, event management, and SIEM tools to:

- Improve signal quality / reduce alert fatigue

- Support faster incident triage

• - Contribute to documentation, runbooks, and operational improvements focused on small, incremental wins.

- Knowledge Transfer & Operational Resilience

- Participate in knowledge transfer activities related to platform transitions and retirements. Maintain documentation.

- - Support on call or escalation rotations as needed.

Mandatory Skills Description:

• Minimum 4-5 years of experience in infrastructure operations, monitoring, observability, or platform operations roles, supporting enterprise environments

• Hands on experience with systems administration for Linux and Windows servers, including troubleshooting, configuration, and deployment of monitoring or management agents (e.g., SolarWinds, Datadog, Dynatrace).

• Foundational networking knowledge, including concepts such as SNMP, network monitoring, LAN/WAN fundamentals, firewalls, and telemetry collection, sufficient to support network centric monitoring platforms like SolarWinds

• Not a must but nice to have experience with platform like StruxureWare.

• Experience with observability or monitoring platforms, such as SolarWinds, Datadog, Dynatrace, or similar tools, with an understanding of alerting, dashboards, and signal quality.

• Exposure to cloud environments, preferably Microsoft Azure, including familiarity with monitoring and logging concepts (e.g., cloud based telemetry, logs, metrics, and integrations).

• Basic understanding of incident and event management practices, including alert triage, escalation, and collaboration with incident response or operations teams.

• Demonstrated willingness and ability to learn new technologies quickly, with examples of picking up new platforms, tools, or domains outside of prior core expertise.

• Familiarity with Agile or SAFe ways of working, including collaboration in sprint based delivery models, and cross functional team engagement is a plus.

• Strong communication and collaboration skills, with the ability to work effectively with platform owners, operations teams, security teams, and external stakeholders.

• Experience working in a modern Dev workflow using GitHub (branches, pull requests, code reviews, and CI/CD) to manage and deploy scripts/automation used for platform operations

• Working proficiency in scripting languages such as PowerShell, Python, BASH, or similar scripting languages.

• Knowledge with Azure, Azure Active Directory (AD), and hybrid cloud environments is a plus.

• Exposure to SIEM concepts or platforms such as Azure Sentinel, CRIBL, or similar is a plus.

• Experience with change management practices in an enterprise IT environment is beneficial.

Nice-to-Have Skills Description:

Agile Methodologies

Compensation:

$65/hr to $75/hr.

Exact compensation may vary based on several factors, including skills, experience, and education.

Position: Tooling Design Engineer

Location: Onsite in Dunwoody, GA

Duration: 12 months

JOB DESCRIPTION

The Tooling Design Engineer is responsible for technical ownership of the Invar layup mold design scope, ensuring compliance with customer requirements, manufacturing intent, and release‑level documentation prior to design handoff.

Responsibilities include:

• Own tool architecture and design intent for Invar LM tooling, including facesheets, substructures, lifting features, casters, drill bars, and return flanges
• Ensure design compliance with vacuum integrity requirements, DB locations, TC integration, and customer‑provided standards
• Interpret and apply AWS/WPS welding requirements within drawing notes and weld details
• Lead design reviews, adjudicate comments, and control scope through approval and release phases
• Coordinate technical interfaces between tooling design, CAD development, and checking activities
• Approve final design and drawing packages for release prior to customer handoff

REQUIRED SKILLS AND EXPERIENCE

• BS in Mechanical, Manufacturing, or Aerospace Engineering (or equivalent experience)
• 8–12+ years of tooling or large‑scale mechanical design experience
• Direct experience with aerospace composite tooling or large welded Invar structures strongly preferred
• Proven ability to deliver release‑ready designs under fixed‑fee constraints
• Must have strong experience utilizing NX

Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.

Are you a Chassis Designer Engineer looking for a new challenge and an opportunity to further advance your skills and career in a great working environment? Join our fast-growing team supporting leading Aerospace companies! If you are a highly motivated individual, a self-starter with an entrepreneurial spirit and a genuine interest in technology, we have the perfect job for you!

The Role

The I&C chassis designer works within the I&C Technology team and is responsible for designing and implementing supporting structures to mount I&C electronic hardware for safety related systems at Power Plants. Typically, they would have an Engineering degree. The I&C Technology team has strong interfaces with electronic hardware design and qualification testing teams. This role requires technical problem solving, strong design skills, understanding of codes and standards, and effective communication/collaboration with other teams.

Applicants must be US Citizen or Permanent Resident. Remote with 10% travel to Wilmington, NC.

Roles & Responsibilities:

• Understanding system requirements, including EMC, Seismic, and other applicable standards.

• 2D / 3D modeling of Instrumentation and Controls chassis and other misc. electrical equipment

• Understanding of electrical schematics, connector panel design, wire harness design, cable routing design.

• Connector selection and design.

• Performing integration testing of the design and documenting test results.

• Performing Verification of Design Specifications and Reports.

• Engage customers to define scope, review results, and discuss technical risks.

• Work with Tech Leads to establish an effective work plan, including time estimates, schedule estimates, requirements and work processes.

• Apply engineering fundamentals and 1st order engineering principles to establish and/or confirm expected performance.

• Provide clear and complete analysis documentation in accordance with GE engineering procedures.

• Manage time effectively to provide quality deliverables within the expected project timeline.

• Communicate effectively to leadership the status of work activities.

• Effectively manage multiple priorities.

Required Skills (Technical Competency):

Bachelor’s degree in mechanical, electrical, or related engineering degree from an accredited college of university.

• 4-6 years of experience

• Knowledge of common 2D / 3D drawing programs.

• Experience with coding conventions, unit testing and integration testing of control cabinets and chassis.

• Minimum 5 years of experience in field.

• US Citizen or Permanent Resident required

Additional Desired Characteristics

• Solves technical challenges through application of common design patterns and identifying appropriate patterns for use in problem solving.

• Inventor experience (including Vault)

• AutoCAD experience.

• Experience understanding coding standards that meets and delivers desired functionality using technology selected for the project.

• Excellent written and verbal communications skills and ability to articulate clearly.

• Contributes to creative solutions and challenges status quo.

• Proactively learns new tools and identifies opportunities for improvement and promotes their adoption.

Physical Requirements & Work Environment:

• Mostly Office Environments, Occasional Shop Floor involvement.

• Substantial amounts of telephone and computer work.

• Heavily Regulated Industries with strict adherence to procedures.

• Flexibility to meet business deadlines by staying late or arriving early.

• Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PM

• Ability to use personal transportation to visit customer locations.

• Due to the nature of the work, all candidates must be a U.S. Citizen or Permanent Resident.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

We are looking for humble geniuses, who believe that engineering has the potential to make the impossible, possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers.

As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we’re eager to hear from you.

The achievers, high performers, and courageous challenge-crushers we seek, have the following characteristics and skills:

Job Title: Data Engineer

Location: 100% Remote

Employment Type: W2 Contract, 6 Month Contract with possibility of extension

Pay Rate: $50.00 – $55.00/hour

Role Overview:

BEPC is seeking a Data Engineer to support our client by designing, building, and optimizing scalable data pipelines and architectures. This role is ideal for a technically strong professional who thrives in a collaborative environment and enjoys working with large datasets, cloud platforms, and modern data technologies to drive business insights.

Key Responsibilities:

• Design, develop, and maintain ETL pipelines for large-scale structured and unstructured data.
• Build and optimize data architectures, models, and database systems for performance and scalability.
• Develop data solutions using cloud platforms (AWS, Azure, or GCP).
• Collaborate with cross-functional teams to translate business needs into technical solutions.
• Ensure data quality, integrity, and security, especially with sensitive datasets.
• Integrate data from multiple sources including databases, APIs, and flat files.
• Support analytics and machine learning initiatives with clean, reliable datasets.
• Troubleshoot and resolve data pipeline and performance issues.
• Document systems, workflows, and processes for maintainability and knowledge sharing.

Qualifications:

• Bachelor’s degree in Computer Science, Engineering, or related field.
• 3+ years of experience in data engineering or similar roles.
• Strong experience with ETL processes and data pipeline development.
• Proficiency in SQL and Python.
• Experience with Databricks, Apache Spark, or similar big data tools.
• Hands-on experience with cloud platforms (AWS, Azure, or GCP).
• Strong understanding of database design and optimization.
• Experience working with large-scale and distributed data systems.
• Advanced English communication skills.

Preferred Qualifications:

• Experience with real-time data processing or streaming technologies.
• Familiarity with industrial data systems (e.g., PLCs, LabVIEW).
• Exposure to machine learning workflows or data science collaboration.
• Knowledge of data governance and compliance standards.

The Industrial Engineer will be responsible for making process improvements through collection and analysis of manufacturing data to improve safety, product quality, customer delivery, and cost reductions. Provide on-floor process information for training and meeting engineering standards. Support and provide production associates with the tools required to perform the job in a manner to meet all requirements.

Duties and Responsibilities

May include, but are not limited to, the following:

• Leading and directing technical activities are necessary to solve problems encountered from blending through shipping. Ensure the team takes the necessary steps through effective communication and proper documentation to avoid similar problems in the future
• Develop & maintain process guidelines (SOP/SOC) and training programs for the integration of new products and systems
• Reduce process variation (improve process capability) to ensure consistent product quality and adherence to manufacturing standards
• Lead cost reduction initiatives through materials, product, and process improvements; assist the project teams to hold brainstorming sessions and develop action plans for the Profit Improvement Process (PIP), including activities to reduce utilities consumption, cycle times, scrap, downtime, material usage variance, and direct labor
• Act as a technical resource in Continuous Improvement Tools to plant and PIP project leaders: Lean Manufacturing/Toyota Production Systems, Six-Sigma, 5S/6S, Total Productive Maintenance, Kaizen Events, Value Stream Maps, DOEs, FMEAs, Advanced Problem-Solving, SMED, etc., and assist in their implementation in an efficient manner for individual projects
• Participate in the updating of manufacturing standards as a result of performance improvements
• Develop work cell layouts in an effort to optimize material flow and support 5S and visual management initiatives
• Initiate new equipment and technologies to maintain the company’s competitive advantage; including detailed scope definitions with the plant (capabilities, throughput, and equipment controls including function block diagrams, process parameters, and data acquisition requirements), RFQ documents, and execution timeline plans (including facility preparation, installation, H&S, training, production ramp-up, etc.).

Education, Experience and Qualifications

• B.S. degree (or equivalent) in Mechanical Engineering, Manufacturing Engineering, Industrial Technology
• 10+ years of experience of manufacturing work experience
• High volume, continuous manufacturing environment
• Process Engineering / Manufacturing Engineering / CI skills and expertise
• A results-oriented problem solver with an analytical approach
• Excellent verbal & written communication
• A hands-on individual with good people skills
• Six sigma green/black belt and knowledge of DOE preferred

Physical Demands

While performing the duties of this job, the employee is frequently required to sit; stand; walk; use hands to touch, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stoop, kneel, or crouch. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Work Environment

While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions and moving mechanical parts. The employee is frequently exposed to fumes or airborne particles, toxic or caustic chemicals, risk of electrical shock, and vibration. The employee is occasionally exposed to high, precarious places. The noise level in the work environment is usually loud.

Minimum Qualifications

1-3 years of experience (or equivalent projects/internships)

Python experience — scripting, automation, basic data processing

Experience with Linux environments (command line, SSH, basic system administration)

Willingness to work hands-on with physical hardware

Strong debugging instincts — you dig until you find the root cause

Nice to Have

Experience working with Android devices (ADB, logcat, shell commands)

Familiarity with 6DoF robots

Experience with modern C++

Experience with VR/AR devices or embedded systems

Version control with Git / Buck / Mercurial

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

Plans and oversees engineering activities and projects within the department. Develops and directs teams to design, optimize, and implement new manufacturing processes and equipment into production. Drives continuous improvement efforts in process design, cost savings, quality improvements, and resource utilization.

Job Responsibilities and Essential Duties:

• 
  
• Responsible for engineering projects, incorporating newest manufacturing technologies & methods, resolving engineering problems, and improving existing manufacturing processes/equipment.
  
• Responsible for upstream equipment qualification deliverables (URS, FAT, SAT, etc.).
  
• Prioritize and communicate project priorities based on current business needs.
  
• Responsible for achieving product quality, productivity, and standard cost goals.
  
• Maintain compliance with all regulatory standards for product and personnel safety.
  
• Guide, direct, and coordinate facility moves, process transfers, and new equipment installations ensuring improved product quality, manufacturing efficiencies, production yields, and reduce product costs.
  
• Support nonconformance investigation.
  
• Responsible for identification and communication with external machine builders and systems integrators.
  
• Support manufacturing objectives as specified by the management team by promoting investigation, inventiveness, creativity and solutions to various process, implementation, and material flow/control problems.
  
• Communicate new ideas, technology advances, and opportunities to management team for review, evaluation and action.
  
• Responsible for developing and maintaining department expense and capital budget(s).
  
• Create and maintain a safe environment. Ensure legal requirements and safety policies are enforced.
  
• Assist in special projects as needed.
  
• Contributes to team effort by accomplishing related duties as requested.
  

Required Knowledge, Skills and Abilities:

• 
  
• Ability to work with flexible and changing production schedules.
  
• Must be able to collaborate effectively with others, and work well within cross-functional teams and across multiple sites, as applicable.
  
• Self-motivated and have the ability to manage projects and problem solve on a regular basis.
  
• Highly organized with strong project management and technical abilities.
  
• Demonstrated ability to develop strategies that will help build a positive manufacturing environment.
  
• Ability to communicate with machine builders and system integrators.
  
• Strong negotiation skills required.
  
• Strong computer skills, including MS Office applications (Word/Excel) are required.
  

Minimum Requirements:

• 
  
• Bachelor's degree in Engineering, Industrial Management, or related field or equivalent.
  
• Minimum 10 years of experience within a manufacturing or process development environment, preferably within the Medical Device Industry.
  

Quality Requirements:

Build Quality into all aspects of their work by maintaining compliance to all quality requirements.

• 
  
• Ensure compliance to all FDA and Worldwide Quality & Compliance regulations (As applicable to the job function).
  
• Must have the education and experience to understand and comply with U.S. and Worldwide medical device regulations (As applicable to your job function).
  
• Attend all required Quality & Compliance training at the specified interval.
  
• Adopt the "Beyond Compliance Quality Culture" in the work environment; always meet and exceed requirements.
  

Environmental/Safety/Physical Work Conditions:

• 
  
• Ensures environmental consciousness and safe practices are exhibited in decisions.
  
• Duties are performed in an office/manufacturing/warehouse environment. May require the use of personal protective equipment as dictated by the work area.
  

The physical demands described here are a representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The salary range for this position is between $94,000-$118,000/annually depending on experience and location, with a 5% STIP bonus

#LI-MV1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.