Storm32 Bgc Schematic Jobs in Usa

Job Title: Test Technician

Location: West Columbia, SC

Hire Type: Contract to Hire

Benefits: Insurance (Medical, Dental, Vision), PTO, and more!

Pay: $24-$28 per hour

Shift: 1st Shift

We’re seeking a hands-on Test Technician with a solid technical foundation and strong troubleshooting abilities to support our electronic product testing operations. The ideal candidate will have formal training, certifications, or education in electronics and a working knowledge of Ohm’s Law, schematic reading, and electrical power systems. This role focuses on real-world testing, debugging, and validation.

Job Duties:

• Conduct electrical and electronic tests to verify performance, functionality, and compliance with production quality standards.
• Troubleshoot and debug issues at the component, board, and system levels using schematics and test equipment.
• Develop, maintain, and improve test and burn-in processes to ensure reliability and throughput.
• Review and update process specifications and documentation to ensure accuracy and alignment with current practices.
• Monitor yields and identify root causes of test failures, coordinating corrective actions with engineering and quality teams.
• Support the design, setup, and validation of new test fixtures, jigs, and diagnostic tools.
• Perform firmware flashing, system configuration, and multi-unit hardware interconnects (Ethernet/BNC/twisted pair).
• Set up and test complex disk arrays or power distribution assemblies as required.
• Maintain preventive maintenance and calibration schedules for all test equipment.
• Drive recovery and repair efforts for any downed test or burn-in stations, coordinating across maintenance and engineering teams.
• Assist with new product introduction (NPI) by supporting test development and validation activities.

Qualifications:

• Associate degree, technical diploma, or equivalent military/electronics training required.
• Strong understanding of Ohm’s Law, circuit fundamentals, and electrical schematics.
• Hands-on experience testing and troubleshooting electronic or electrical systems.
• Proficiency with meters, oscilloscopes, and other diagnostic tools.
• Experience with power electronics or high-voltage systems is a plus.
• Ability to follow detailed procedures, interpret technical drawings, and work independently to resolve issues.
• Excellent problem-solving and communication skills.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Automation Technician II

Location: Onsite; Buffalo Grove, IL

Employment Type: Full-Time / Direct Hire

Pay: $26–28/hour

12-hour Shift rotation:

• 6:00 AM – 6:00 PM, rotating schedule

• 6:00 PM – 6:00 AM, rotating nights (10% shift differential)

Position Overview

We are seeking Maintenance Technicians with hands-on experience supporting automated manufacturing, robotics, or warehouse automation environments. This role is critical to maintaining continuous system operation and minimizing downtime across highly automated equipment and production systems.

The ideal candidate is comfortable troubleshooting complex electromechanical systems, working with PLC-controlled equipment, and performing both reactive and preventive maintenance in a fast-paced, high-automation setting.

What You’ll Be Doing

• Maintain continuous operation of automated, robotic, and material handling systems by adjusting, repairing, replacing, or modifying components
• Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems and return equipment to service quickly and safely
• Perform scheduled preventive maintenance on robotic systems and process support equipment
• Read and interpret electrical schematics, mechanical diagrams, and complex automated system drawings
• Work with PLC-controlled equipment and assist in automation system diagnostics
• Identify machine malfunctions, isolate root causes, and implement cost-effective repairs
• Perform equipment calibrations, re-qualifications, and system validations per schedule
• Assist engineers and automation teams with equipment installation, removal, and system qualification
• Support corrective action reports and process improvement initiatives
• Disassemble equipment, inspect components for defects, and repair or replace parts as needed
• Support both hardware and, at higher levels, limited software maintenance activities

Required Experience and Skills

• Background in automated manufacturing, robotics, material handling systems, or automated warehouse environments
• Strong electrical and mechanical troubleshooting skills
• Experience with PLC-controlled equipment
• Ability to read electrical schematics and mechanical drawings
• Preventive and corrective maintenance experience in high-volume or automated settings
• Solid computer and documentation skills

Technical Experience Preferred

• Automation, robotics, or conveyor/material handling systems
• Electronic assembly and troubleshooting (schematics, PCB loading, mechanical assembly)
• Cable and harness work (crimping, soldering, connector assembly, cable prep)
• Testing equipment such as oscilloscopes, logic analyzers, and cable/harness testers
• Automated machine operations (surface mount, component insertion, wave soldering)
• Mechanical and electrical tools including alignment tools, measuring tools, taps & dies, and power/air tools

Job Summary

We are seeking a skilled and motivated Carpenter to join our dynamic construction team. In this role, you will be responsible for constructing, installing, repairing, and maintaining structures and fixtures across various projects. Your expertise will help bring architectural visions to life, ensuring quality craftsmanship and safety standards are met at every stage. This position offers an exciting opportunity to work on diverse projects, from residential remodels to commercial builds, utilizing your carpentry skills to deliver exceptional results.

Duties

• Read and interpret blueprints, schematics, and technical drawings to accurately execute construction plans
• Measure, cut, assemble, and install a variety of building components using hand tools and power tools
• Perform framing work including metal stud framing, wood framing, and concrete forming for structural support
• Install doors, windows, cabinetry, fixtures, siding, roofing materials, and trim carpentry elements with precision
• Conduct restoration tasks such as water damage remediation, plastering, stucco application, and mold remediation
• Assist with heavy lifting and material handling to ensure safety and efficiency on the construction site
• Collaborate with project managers and other tradespeople to ensure projects stay on schedule and meet quality standards

Requirements

• Proven experience in construction estimating, blueprint reading, and schematic interpretation
• Proficiency with hand tools, power tools, metal stud framing, CNC machinery operation, and fabrication techniques
• Strong background in various carpentry disciplines including trim carpentry, framing carpentry, roofing, flooring installation, tile laying, and cabinet installation
• Knowledge of plumbing, electrical work, masonry, drywall installation (including plastering), caulking, siding application, and water damage restoration
• Ability to perform heavy lifting safely and efficiently in a fast-paced environment
• Familiarity with construction site safety protocols and OSHA standards
• Excellent problem-solving skills with attention to detail in restoration industry projects or remodeling efforts
• must have EXP WITH USING SAW'S
• MUST HAVE TWIC CARD

Join us if you’re passionate about craftsmanship! Bring your expertise in construction site experience—whether in manufacturing settings or residential/commercial projects—and help us build durable structures that stand the test of time. Your skills in blueprint reading, schematics interpretation, fixture installation, rebar installation, metal stud framing, or electrical experience will be highly valued. We’re committed to supporting your growth as a professional while delivering top-quality results on every project!

Maintenance Tech III (Electrical & Controls)

About Shaw Bakers

At Shaw Bakers, we love mixing renowned French techniques with state-of-the-art process innovation to bring delicious baked goods to our local community through our legendary local Cafes, as well as national retail partners across North America. We are an aggressive, fast-growing company with a full pipeline of exciting new projects, products, and employment opportunities.

About The Role

We are looking for a reliable and experienced Mechanical & Controls Technician, capable of installation, maintenance, troubleshooting, minor programming, and repair of electrical, mechanical, and automated control systems in an industrial or manufacturing environment. This position combines electrical, mechanical, and controls knowledge, ensuring systems function within design parameters safely and efficiently at our Shaw Bakers’ manufacturing facility in San Leandro.

Core Responsibilities

Responsibilities and essential job functions include but are not limited to the following:

• Controls & Electrical Duties: Troubleshoot and repair electrical and electronic systems, motor controllers, variable frequency drives (VFD), servo systems, and motor starters. Diagnose PLC alarms and repair or replace sensors, actuators, input/output modules and other control devices as required.
• Vendor Coordination: Point of contact with vendors for PLC hardware/software issues or upgrades, and general mechanical and electrical equipment repair.
• Mechanical Duties: Inspect, maintain, and repair mechanical systems, including motors, pumps, compressors, conveyors, production machinery, and related equipment. Perform diagnostic tests, identify faults, and implement repairs or part replacements. Ensure preventive maintenance procedures are followed to minimize downtime.
• Documentation & Compliance: Maintain detailed records of maintenance, diagnostics, calibrations, and system modifications. Prepare technical reports, schematics, and manuals. Ensure all work adheres to safety, environmental, and regulatory standards.
• Training and Support: Providing technical expertise and hands on training and development for operators and maintenance techs on an ongoing basis.
• Proactive Engagement: Perform area walkthroughs and inspections of the facility and equipment to identify and resolve issues proactively.
• Comply with Health & Safety Policies: Follows and ensures health and safety policies are always the first task.
• Collaboration: Effectively collaborate with other departments and vendors to develop, plan, and implement projects to improve company efficiency, safety, and overall throughput.

Skills & Experience Required

• 5+ years of Industrial Control Systems Maintenance required, including hands-on experience with motor controls, VFDs, servos, DeviceNet, and PLC troubleshooting.
• 5+ years of Mechanical Maintenance, including troubleshooting, from a manufacturing or industrial environment required.
• Technical Skills: Ability to read and interpret electrical schematics, mechanical blueprints, wiring diagrams, and pneumatic/hydraulic schematics. Proficient with diagnostic tools. Strong troubleshooting skills for both mechanical and electrical systems.
• Knowledge of automation software and HMIs a plus.
• Experience with Ladder logic programming a plus.
• Experience reporting daily metrics in a CMM.
• Ability to operate in a rapidly changing environment.
• Excellent communication and interpersonal skills.

Electrical Technician - Harness Assembly

Albuquerque, New Mexico

We are seeking an experienced Electrical Technician with a strong background in harness assembly to support the production and integration of electrical systems for our Aerospace client This role is hands-on and requires a deep understanding of electrical wiring, cable harness fabrication, and aerospace-grade standards.

Job Purpose:

• Harness Fabrication & Assembly – Build, route, and install electrical harnesses, ensuring proper terminations, crimping, and soldering according to aerospace standards.
• Wiring & Integration – Assist in the assembly and installation of electrical components, including connectors, circuit boards, and avionics systems.
• Blueprint & Schematic Interpretation – Read and interpret electrical schematics, wiring diagrams, and engineering drawings to ensure accurate builds.
• Testing & Troubleshooting – Perform continuity tests, insulation resistance checks, and troubleshooting to verify harness integrity.
• Quality Control & Compliance – Ensure all work meets industry and company quality standards, adhering to safety and aerospace regulations.
• Collaboration – Work closely with engineers and other technicians to support system integration and problem-solving efforts.

Experience Required:

• 3+ years of experience in electrical harness assembly, wiring, or related field
• Proficiency in crimping, soldering, and connector assembly
• Ability to read and work from engineering drawings, schematics, and wiring diagrams
• Strong understanding of cable routing, strain relief, and aerospace/automotive wiring standards
• Hands-on experience using tools such as wire strippers, heat shrink tubing, and torque wrenches
• Excellent attention to detail and ability to work in a fast-paced environment

Desirable Experience:

• Experience working in aerospace, aviation, or high-tech manufacturing
• IPC/WHMA-A-620 certification or similar (preferred but not required)
• Familiarity with electrical testing equipment (multimeters, continuity testers, etc.)
• Ability to adapt and troubleshoot in a dynamic R&D environment

If you are interested then please apply today.

Why Work With Us:

We offer a best-in-class work environment for our team, supporting their professional growth while providing a challenging, exciting, and safe workplace. From offering a robust benefits package to generous annual performance bonuses, PTO, and more, we live our core values—teamwork, resiliency, and integrity—reflecting our long-term commitment to our employees, communities, and the environment.

Position Overview:

We are seeking a Process Control Technician Specialist to provide hands-on support for the process control systems that drive our metal, alloy, and component-making facility. This role is designed for a skilled technician with experience in troubleshooting and maintaining PLCs, HMIs, and industrial process control systems.The ideal candidate will support daily plant operations, lead equipment-based improvements, and contribute to the implementation of OPEX projects and continuous improvement initiatives across a complex, high-tech manufacturing environment.

Essential Duties:

• Provide hands-on technical support for plant process control systems, including routine checks, basic maintenance, and troubleshooting equipment or system faults.
• Provide daily technical support for plant process control systems, including troubleshooting and maintaining PLCs, HMIs, VFDs, sensors, and safety systems to ensure smooth and safe operations.
• Respond to process control-related issues as part of an on-call rotation,including after-hours support as needed.
• Assist in implementing and maintaining standard operating procedures for process control systems and support response protocols.
• Support troubleshooting efforts led by engineers to minimize downtime and ensure continuous improvement of system performance.
• Document and report system issues,maintenance actions, and resolution outcomes to engineering leadership.
• Perform routine inspections of process control equipment to identify and report wear,potential failure points, or improvement opportunities.
• Support continuous improvement (CI) and OPEX projects by implementing changes to process control systems, improving equipment functionality, and reducing downtime.
• Perform hands-on installation, testing, and calibration of process control components—such as instrumentation, control panels, and field devices.
• Read, interpret, and redline electrical schematics, P&IDs, panel layouts, and wiring diagrams for existing or modified systems.
• Support the programming, configuration, and maintenance of process control platforms including Rockwell (Studio 5000), FactoryTalk View, and Siemens TIA Portal.
• Conduct preventive and predictive maintenance of process control systems; perform software backups, maintain change logs, and document all control system activities.
• Interface regularly with operators, maintenance, engineering, and EHS teams to ensure process control systems meet operational and safety requirements.
• Assist with commissioning and startup of new or modified process control systems, ensuring compliance with performance specifications.
• Use diagnostic tools (e.g., multimeters, oscilloscopes, network analyzers) to test and troubleshoot control signals and communications.
• Collaborate with other technicians, operators, and engineering staff to support safe, efficient plant operations.
• Support training efforts for maintenance and operations staff to improve system knowledge and troubleshooting capabilities.

Basic Qualifications:

• Associate degree or equivalent technical certification in Electrical Engineering Technology, Industrial Automation, Mechatronics, or a related field.
• 3+ years of hands-on experience working with PLC and HMI-based process control systems in an industrial or manufacturing environment.
• Proficiency in reading, interpreting, and modifying control system documentation such as electrical drawings and schematics.
• Hands-on experience with Rockwell (Allen-Bradley), Siemens, or similar process control platforms.
• Familiarity with industrial communication protocols: EtherNet/IP, Profinet, Modbus TCP.
• Comfortable working in an industrial environment with chemical,mechanical, and thermal processes.
• Experience using diagnostic tools such as multimeters, loop calibrators, and signal simulators.

Desired Qualities:

• 5+ years of process control or automation experience in a manufacturing setting.
• Proactive, self-motivated, and comfortable taking ownership of process control-related issues.
• Strong troubleshooting skills with an analytical approach to solving electrical/control problems.
• Familiarity with robotics, vision systems, or motion control technologies is a plus.
• Comfortable balancing multiple priorities and adapting to dynamic production demands.
• Basic CAD skills for modifying electrical schematics (AutoCAD Electrical preferred).
• Knowledge of SCADA systems and virtualized environments is a plus.
• Excellent verbal and written communication skills; able to clearly document work and collaborate across departments.
• Advanced proficiency in Microsoft Office tools, especially Excel and Outlook.

CNC Maintenance Mechanic - $35/hr!

$2000 Bonus When You Sign - Start Immediately!

This position is a direct hire opportunity!

Integrity Trade Services is hiring a CNC Maintenance Mechanic for our manufacturing client to start immediately at $35/hr! Receive comprehensive benefits through our client upon hire!

Responsibilities:

The CNC Maintenance Mechanic plays an integral role in planning, installing, and servicing both CNC and manual machinery. We’re looking for a dependable professional with strong mechanical aptitude who consistently follows safety guidelines and ethical practices. The ideal candidate will be skilled in blueprint interpretation and collaborate effectively to support our company’s mission, vision, and values.

• Follow all company safety procedures to protect yourself, coworkers, contractors, customers, and property.
• Promote and maintain a safety-first culture by reporting unsafe conditions and contributing to a secure workplace.
• Keep the work area clean and orderly in compliance with preventative maintenance programs.
• Read, prepare, and interpret wiring diagrams, schematics, and equipment layouts.
• Lead the installation, removal, and relocation of production equipment.
• Diagnose and repair issues using hydraulic and pneumatic schematics.
• Apply Lock Out/Tag Out procedures during machine servicing.
• Perform all additional assigned duties with accuracy and professionalism.

Location: Alsip, IL

Schedule/Shift Details: Monday - Friday 7:00am - 4:00pm

• Weekends as Needed

Qualifications:

• HS diploma or GED preferred
• Minimum 3 years of experience in a manufacturing environment working with mechanical, electrical, pneumatic, and hydraulic equipment.
• Minimum 3 years of maintenance experience with demonstrated expertise in CNC and manual machine tools.
• Minimum 2 years of experience troubleshooting and repairing hydraulic and pneumatic systems, as well as heating, cooling, and general facility systems.
• Minimum 2 years of experience reading and interpreting blueprints, mechanical drawings, electrical schematics, and wiring diagrams.
• Minimum 2 years of experience using precision measurement instruments such as micrometers, gauges, meters, calipers, and related tools.

Core Competencies:

• Mechanical & Technical Proficiency: Solid understanding of precision tools, machinery, and industrial systems, with a commitment to safety and continuous improvement.
• Ability to work independently while contributing to a team-oriented environment.
• Strong verbal and written communication skills; fluent in English.
• Effective critical thinking, troubleshooting, and problem-solving skills in technical or fast-paced settings.
• Comfortable working in an industrial manufacturing setting with exposure to noise, temperature variations, fumes, and chemicals.
• Physically capable of lifting up to 50 lbs, kneeling, bending, climbing ladders, working in confined spaces, and standing or walking for extended periods.
• Ability to work at elevated heights (e.g., scissor lifts).

Benefits:

Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings.

Why choose Integrity Trade Services?

At ITS, we offer our employees a competitive salary paid weekly and a comprehensive benefits package, including medical, dental, and vision insurance.

Interested? Want to Learn More?

Reach out to Melissa Bauza at or call 7 !

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

Automation Technician

Location: Onsite; Monroe, OH

Employment Type: Full-Time /Contract-to-Hire

Pay: $28-32/hour

1st Shift: 6am-3pm M-F

Position Overview

We are seeking Automation Technicians with hands-on experience supporting automated manufacturing, robotics, or warehouse automation environments. This role is critical to maintaining continuous system operation and minimizing downtime across highly automated equipment and production systems.

The ideal candidate is comfortable troubleshooting complex electromechanical systems, and performing both reactive and preventive maintenance in a fast-paced, high-automation setting.

What You’ll Be Doing

• Maintain continuous operation of automated, robotic, and material handling systems by adjusting, repairing, replacing, or modifying components
• Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems and return equipment to service quickly and safely
• Perform scheduled preventive maintenance on robotic systems and process support equipment
• Read and interpret electrical schematics, mechanical diagrams, and complex automated system drawings
• Work with PLC-controlled equipment and assist in automation system diagnostics
• Identify machine malfunctions, isolate root causes, and implement cost-effective repairs
• Perform equipment calibrations, re-qualifications, and system validations per schedule
• Assist engineers and automation teams with equipment installation, removal, and system qualification
• Support corrective action reports and process improvement initiatives
• Disassemble equipment, inspect components for defects, and repair or replace parts as needed
• Support both hardware and, at higher levels, limited software maintenance activities

Required Experience and Skills

• Background in automated manufacturing, robotics, material handling systems, or automated warehouse environments
• Strong electrical and mechanical troubleshooting skills
• Experience with PLC-controlled equipment is a plus
• Ability to read electrical schematics and mechanical drawings
• Preventive and corrective maintenance experience in high-volume or automated settings
• Solid computer and documentation skills

Technical Experience Preferred

• Automation, robotics, or conveyor/material handling systems
• Electronic assembly and troubleshooting (schematics, PCB loading, mechanical assembly)
• Cable and harness work (crimping, soldering, connector assembly, cable prep)
• Testing equipment such as oscilloscopes, logic analyzers, and cable/harness testers
• Automated machine operations (surface mount, component insertion, wave soldering)
• Mechanical and electrical tools including alignment tools, measuring tools, taps & dies, and power/air tools

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

A well-established commercial construction firm in the Madison County area is seeking an experienced Lead Estimator to join their growing team. This position plays a key role in the preconstruction process by developing accurate project cost estimates, analyzing drawings and schematics, and supporting successful project planning from early concept through closeout.

This role requires strong conceptual estimating experience. The estimator must be comfortable reviewing preliminary drawings, schematics, or incomplete plan sets and developing reliable pricing when full plans and specifications are not always available.

Key Responsibilities

• Demonstrate expertise in all aspects of project estimating from early project planning through commissioning and closeout.
• Developconceptual estimates using preliminary drawings, schematics, and limited project information.
• Analyze architectural drawings, blueprints, and specifications to prepare accurate cost estimates for drywall and related construction projects.
• Calculate material quantities, labor costs, and overall project budgets.
• Evaluate construction methods and material selections to ensure cost efficiency and quality.
• Collaborate with project managers, subcontractors, and suppliers to gather information needed for accurate pricing.
• Prepare detailed and competitive bids and proposals.
• Communicate with architects, contractors, and clients to clarify scope and project requirements.
• Maintain awareness of market pricing, material costs, and industry trends to ensure accurate and competitive estimates.
• Support a smooth transition from estimating to project operations once work is awarded.

Qualifications

• Bachelor’s degree in Construction Management, Engineering, or a related field preferred.
• Demonstrated experience with conceptual estimating, including pricing projects from early-stage drawings or incomplete plan sets.
• Strong written and verbal communication skills.
• Excellent organizational skills and attention to detail.
• Ability to manage multiple estimates and deadlines in a fast-paced environment.
• Self-motivated, results-oriented, and able to work independently.
• Ability to build strong working relationships with internal teams, subcontractors, and project stakeholders.

This position offers the opportunity to contribute to a collaborative team environment and play a critical role in the early planning and financial success of construction projects.

Enscicon is an Engineering and Construction Staffing and Recruitment Firm. We're currently conducting a search on behalf of a client in need of Electrical, Instrumentation and Controls (EI&C) Designers in Houston, TX.

RESPONSIBILITIES

Electrical 3D Modeling / Design

• Completes required tasks, including 3D modeling, red-lined drawing revisions, electrical design calculations, schematic drawing creation, cable tray layouts, electrical AutoCAD block programming, dimensioned and multilayer drawing creation, onelines, area classification development, schematics, grounding, heat trace, circuit schedules, electrical details, BOM creation, lighting design and calculations.
• Coordinates with all disciplines to create an accurate and complete model.

Instrumentation & Controls Design

• Completes required tasks, including red-lined drawing revisions, control panel and instrument junction box location plans, control panel and instrument junction box layout and design, I/O wiring diagrams, loop diagrams, control system network architecture, control system power distribution, fire and gas safety location plans, emergency shutdown systems and schematics, instrument locations plans, instrument installation details, work point locations for circuit schedule, and BOM creation.
• Ability to read and understand Instrument Indexes, I/O Lists and P&IDs.
• Coordinates with I&C Engineers to create an accurate and complete drawing package.

Construction Drawings

• Prepares final construction drawings to reflect the engineered/modeled design.
• Updates drawings per engineer comments.
• Assist with other duties as assigned.