Stonebrooke Engineering Jobs in Usa
3,850 positions found — Page 14
Salary range:
The UC academic salary scales set the minimum pay at appointment. See the following table for the current salary scale for this position: . The current full-time salary range for this position is $75,301 - $199,722. TSP hourly rate: $150-400. Starting salary will be commensurate with highest degree, past college-level teaching experience, relevant industry experience and equity within the department.
Percent time:
17% -33%. Instructors teaching one course with three hours of lecture per week during the semester will normally be appointed at 33% time; exact percentages depend on contact hours and other assigned duties. Other positions include TSP hours of 12-15 per class section.
Anticipated start:
Fall semester (only): 8/1/2025-12/31/2025
Spring semester (only): 1/1/206-5/31/2026
Academic-Year Appointments: 7/1/2025-6/30/2026
Review timeline:
Applications will be accepted and reviewed for department needs, through the final date. We typically review applications for annual course needs in February and August. If you wish to remain in the pool after the final date you will need to reapply.
Position duration:
Initial appointments may be for one semester or a full academic year. Positions may include 8 day boot camp classes and 7 to 15 week semester classes. All classes are current 1 unit.
Application Window
Open date: June 9, 2025
Most recent review date: Tuesday, Jun 24, 2025 at 11:59pm (Pacific Time)
Applications received after this date will be reviewed by the search committee if the position has not yet been filled.
Final date: Wednesday, Oct 14, 2026 at 11:59pm (Pacific Time)
Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.
Position description
The Coleman Fung Institute for Engineering Leadership at the University of California, Berkeley invites applications for a pool of qualified temporary, part-time instructors to teach engineering management topics in the Master of Engineering program (Berkeley MEng) should an opening arise. Screening of applicants is ongoing and will continue as needed.
The MEng program offers coursework in technology innovation and management. We hire a number of qualified professionals and academics to hold temporary lecturer and TSP (Teacher Special Program) appointments to lend variety and subject matter expertise to our core engineering leadership topics:
* Accounting
* Coaching for High Performing Teams
* Communications
* Diversity, Equity, Inclusion & Belonging
* Entrepreneurship
* Ethics
* Finance
* Global Business
* Global Innovations
* Industry Analysis
* Innovation
* Law
* Leadership
* Marketing
* Negotiations
* Organizational Behavior
* Product Management
* Project Management
* R&D Technology Management
* Teaming & Project Management
* Technology Strategy
* Other topics in Engineering Leadership
We hire for both lecturer and TSP positions. TSPs teach short courses on one or more of the topic areas listed. Most TSP courses are taught in a 'bootcamp' 8-day format in early August and early January.
Lecturers may be appointed for a semester or for the academic year, depending on instructional assignments. Lecturers and TSPs are responsible for the course syllabus, curriculum development and delivery, holding office hours, student assessment through relevant projects, presentations, problem sets, exams, and/or class attendance and participation, and assigning grades.
Applicants are considered for positions as needs arise; the existence of this pool does not guarantee that a position is available.
Program: programs-centers/full-time-program/leadership-development/
Labor Contract:
Qualifications
Basic qualifications (required at time of application)
Bachelors or equivalent international degree required by date of application.
Additional qualifications (required at time of start)
Experience teaching college or graduate students by the start date of the job. Masters degree or equivalent international degree required by the start date of the job, or 5 or more years of industry experience.
Preferred qualifications
2 or more years of management or executive level industry experience. Experience teaching graduate-level business and management topics to engineers.
Application Requirements
Document requirements
Cover Letter - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
Resume - Your most recently updated C.V.
Sample Syllabus - Please provide an example syllabus from a previous teaching engagement.
(Optional)Teaching Evaluations - Please provide student evaluations or feedback from one previous teaching engagement; qualitative or quantitative evaluations are accepted.
(Optional)
Reference requirements
- 2 required (contact information only)
Apply link:
JPF04967
Help contact:
About UC Berkeley
UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.
The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.
For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.
In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.
As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.
Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.
As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.
- "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
- UC Sexual Violence and Sexual Harassment Policy
- UC Anti-Discrimination Policy
- APM - 035: Affirmative Action and Nondiscrimination in Employment
Job location
Berkeley, CA
Salary range:
The UC academic salary scales set the minimum pay at appointment. See the following table for the current salary scale for this position: . The current full-time salary range for this position is $75,301 - $199,722. Starting salary will be commensurate with highest degree, past college-level teaching experience, relevant industry experience and equity within the department.
Percent time:
11-100%
The percentage of the appointment will vary, depending on the number of sections taught. Positions are typically part-time.
Instructors teaching one 3-5 unit course during summer sessions will normally be appointed at 11% time.
Instructors teaching one course with three hours of lecture per week during the semester will normally be appointed at 33% time; exact percentages depend on contact hours and other assigned duties.
Anticipated start:
Spring semester (only): 1/1/2026-5/31/2026
Fall semester (only): 8/1/2025-12/31/2025
Academic-Year Appointments: 7/1/2025-6/30/2026
Lecturers hired to teach during summer sessions are employed between May and August.
Review timeline:
The review of applications for spring semester appointments will be in October, for summer sessions in April, and for fall semester appointments in May.
Position duration:
Positions may be for one semester or for the full academic year.
Application Window
Open date: June 10, 2025
Most recent review date: Tuesday, Jun 24, 2025 at 11:59pm (Pacific Time)
Applications received after this date will be reviewed by the search committee if the position has not yet been filled.
Final date: Thursday, Oct 1, 2026 at 11:59pm (Pacific Time)
Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.
Position description
The Department of Civil and Environmental Engineering at the University of California, Berkeley is generating a new applicant pool of qualified temporary instructors and invites applications for a lecturer position to teach courses in our department in the areas of Energy, Civil Infrastructure and Climate; Constructions Systems; Environmental Engineering; GeoSystems Engineering; Structural Engineering, Mechanics and Materials; Systems (Civil Systems); and Transportation Engineering.
This pool is being generated in case of need to accommodate upcoming course needs and new applicants. We plan to hire for the Spring semester, Summer Sessions , and the Fall semester, if the need arises. Candidates under consideration will be contacted by our department. Selected candidates will hold the title of Lecturer.
Applicants are considered for positions as needs arise; the existence of this pool does not guarantee that a position is available.
General Duties:
In addition to classroom/laboratory teaching and preparation, general duties may include (but are not limited to) managing and mentoring graders and/or graduate student instructors (teaching assistants), holding office hours, assigning grades, advising students, preparing course materials (e.g., syllabus), and maintaining course website.
Those interested in remaining in the pool beyond the final date will need to reapply.
Department:
Department: courses/civ_eng/
Qualifications
Basic qualifications (required at time of application)
Bachelor's degree or equivalent international degree is required at time of application.
Additional qualifications (required at time of start)
The following additional qualifications are required by the start of the job. Advanced degree or five years of teaching and/or industry experience. Applicants must be eligible to work in the U.S.A.
Preferred qualifications
Ph.D. or equivalent international degree in an engineering discipline (or related field), experience in the field of Civil and Environmental Engineering and prior teaching experience is preferred. Ability to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
Application Requirements
Document requirements
Curriculum Vitae - Your most recently updated C.V.
Cover Letter
Past Teaching Evaluations or Statement of Teaching (or other evidence of teaching experience and quality) - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
Reference requirements
- 2 required (contact information only)
Apply link:
JPF04969
Help contact:
About UC Berkeley
UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.
The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.
For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.
In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.
As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.
Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.
As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.
- "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
- UC Sexual Violence and Sexual Harassment Policy
- UC Anti-Discrimination Policy
- APM - 035: Affirmative Action and Nondiscrimination in Employment
Job location
Berkeley, CA
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret - Current Security Clearance Status:
Active and existing security clearance required on day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. The Systems Engineering and Test Center (SETC) organization is currently hiring a Sr. Systems Engineer – Software Responsible Systems Engineer (RSE) to join our Tucson, AZ team in the Advanced Technology Effectors System Engineering Department. The SETC organization is an exciting and challenging environment where you will have the opportunity to design, develop and partner with multi-disciplines to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, and strengthen our systems to work the first time and every time for our warfighters!
Systems Engineer – Software Responsible Systems Engineer (RSE) you will own the development and maintenance of all software and firmware level requirements and participate in compliance assessment and issue troubleshooting during formal qualification testing (FQT). You will contribute to specifications of major systems and subsystems in the product technical data package, coordinating with Systems, Software, and Test teams to execute program tasks.
Update and maintain all software and firmware system and subsystem level requirements specifications.
SE technical contributor for verification and validation efforts, ensuring all requirements are being assessed during Formal Qualification Testing
Work closely with the Systems, Software, and Test teams and IPTs on a variety of program technical tasks
Participate in technical conversations with the customer
Become a knowledgeable and ‘go-to’ Systems Engineer for the program
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of five (5) years of prior relevant experience
Experience with at least one of the following: systems software, systems firmware, systems hardware, systems requirements, systems integration, and/or systems test.
Experience in test planning, verification of system requirements and/or formal qualification
S. government issued Secret security clearance is required prior to start date with the ability to obtain program access after start. S. citizens are eligible for a security clearance
Masters or PhD in Engineering, Computer Science, Math or Physics
Top Secret Clearance
tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.
Experience using Agile framework development methods / processes
Experience with software Formal Qualification Testing (FQT)
Experience with performance analysis
Experience with embedded software or firmware algorithms on missile products
Experience with software or firmware requirements development on missile products
Understanding of the Systems Engineering Product Development Cycle
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – Relocation assistance available for this position
This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret - Current Security Clearance Status:
Active and existing security clearance required on day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. The Systems Engineering and Test Center (SETC) organization is currently hiring a Sr. Systems Engineer – Software Responsible Systems Engineer (RSE) to join our Tucson, AZ team in the Advanced Technology Effectors System Engineering Department. The SETC organization is an exciting and challenging environment where you will have the opportunity to design, develop and partner with multi-disciplines to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, and strengthen our systems to work the first time and every time for our warfighters!
Systems Engineer – Software Responsible Systems Engineer (RSE) you will own the development and maintenance of all software and firmware level requirements and participate in compliance assessment and issue troubleshooting during formal qualification testing (FQT). You will contribute to specifications of major systems and subsystems in the product technical data package, coordinating with Systems, Software, and Test teams to execute program tasks.
Update and maintain all software and firmware system and subsystem level requirements specifications.
SE technical contributor for verification and validation efforts, ensuring all requirements are being assessed during Formal Qualification Testing
Work closely with the Systems, Software, and Test teams and IPTs on a variety of program technical tasks
Participate in technical conversations with the customer
Become a knowledgeable and ‘go-to’ Systems Engineer for the program
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of five (5) years of prior relevant experience
Experience with at least one of the following: systems software, systems firmware, systems hardware, systems requirements, systems integration, and/or systems test.
Experience in test planning, verification of system requirements and/or formal qualification
S. government issued Secret security clearance is required prior to start date with the ability to obtain program access after start. S. citizens are eligible for a security clearance
Masters or PhD in Engineering, Computer Science, Math or Physics
Top Secret Clearance
tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.
Experience using Agile framework development methods / processes
Experience with software Formal Qualification Testing (FQT)
Experience with performance analysis
Experience with embedded software or firmware algorithms on missile products
Experience with software or firmware requirements development on missile products
Understanding of the Systems Engineering Product Development Cycle
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – Relocation assistance available for this position
This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Engineering Technician (Firearms R&D)
Youngsville, NC | Full-Time | On-Site | Hourly
Bachstein Consulting is growing, and we’re looking for a hands-on Engineering Technician to support our firearms research, development, and testing efforts.
This is a shop-based, hands-on role working closely with engineers to build prototypes, assemble test hardware, support range testing, and keep development programs moving quickly. Our in-house machine shop supports rapid iteration and low-rate production, allowing ideas to move quickly from concept to functional hardware.
This role is best suited for someone who enjoys building, troubleshooting, and working with mechanical systems in a fast-moving development environment.
Key Responsibilities
- Assemble and modify prototype firearm components and test hardware
- Support engineering test setups and range testing activities
- Troubleshoot mechanical issues during prototype builds and testing
- Maintain and organize parts, components, and test equipment
- Assist engineers with prototype fabrication and development work
- Record and document test observations and hardware changes
- Help prepare and ship components for outside processing when needed
- Maintain a clean and organized work environment in the shop and lab
Required Qualifications
- Eperience assembling or troubleshooting mechanical systems
- Comfort working with hand tools and precision measuring tools
- Ability to work safely and carefully around firearms systems
- Strong attention to detail and organization
- Ability to follow technical instructions and work independently
Preferred Experience
- Experience working in a machine shop, prototype shop, or engineering lab
- Familiarity with firearms platforms and mechanical operation
- Experience with prototype assembly or engineering test environments
- Experience using precision measurement tools (calipers, micrometers, gauges)
Ideal Candidate
- Hands-on problem solver
- Mechanically inclined and comfortable building things
- Detail-oriented and safety-minded
- Reliable and able to work independently
- Interested in firearms design and development
Work Environment
This is an on-site, hands-on role in a small engineering-driven team. Work will include time in the machine shop, lab, and test environments supporting prototype development and firearms testing.
Veterans Encouraged to Apply
Veterans with experience in military weapons systems, armory work, maintenance, or technical specialties are strongly encouraged to apply. Many of the skills developed in military service translate directly to this type of hands-on engineering support role.
Compensation
- Hourly position. Compensation is competitive and based on experience.
Automation Engineering Technician
Location: Smyrna, TN (Technical Logistics Center)
Asurion, the global leader in technology support and protection. Innovation and dedication to delighting customers has made it the preferred provider of technology protection to the world’s largest wireless carriers, trusted retailers and popular device manufacturers. Asurion’s 17,000 global employees support its 280 million consumers with an award-winning experience delivered through products and services that have set the standard in the industry.
Role Summary
The Automation Engineering Technician is a key technical expert responsible for the deployment, maintenance, and optimization of automated solutions within Asurion’s Supply Chain network. This role bridges the gap between high-level engineering design and daily operational execution. You will ensure that automated systems—including robotics, vision systems, and conveyance—operate at peak efficiency to drive productivity, reduce costs, and support New Product Introductions (NPI).
Key Responsibilities
Technical Operations & Maintenance
- System Upkeep: Execute general maintenance, fabrication (jigs/tooling), and repairs on automated equipment to ensure safety, and maximum up time.
- Preventive Care: Research OEM manuals to develop and execute Preventive Maintenance (PM) tasks, calibrations, and ESD checks in compliance with QMS and safety standards.
- Performance Monitoring: Track and report on key metrics such as Overall Equipment Effectiveness (OEE), Units Per Hour (UPH), availability, and yield.
- NPI Support: Participate in the installation, relocation, and testing of new hardware and software deployments.
Engineering Support & Process Improvement
- Troubleshooting: Lead root cause analysis and Level 3 technical support for complex system malfunctions, escalating to senior engineering staff when necessary.
- Continuous Improvement: Identify and implement opportunities for process enhancements, utilizing data to influence decision-making and operational strategy.
- Documentation: Create and maintain high-quality engineering reports, Work Instructions (WI), Job Aids (JA), and FMEA documentation.
- Operational Readiness: Support Automation Engineers in developing business cases, tracking CAPEX/OPEX spend, and validating projected savings.
Management & Coordination
- Inventory Control: Manage maintenance spare parts inventory (min/max levels) and oversee the organization of work areas using 5S methodologies.
- Stakeholder Collaboration: Act as a liaison between internal teams (IT, Operations, Quality) and external vendors to resolve technical issues and manage project timelines.
- Training: Facilitate knowledge transfer by training operators and other technicians on new equipment and updated safety protocols.
Qualifications & Skills
Education/Experience Minimum
- Associate degree in engineering or 2+ years of hands-on experience implementing automated solutions in a manufacturing or supply chain environment.
Technical Proficiency
- Practical knowledge of PLCs, robotics, vision systems, and conveyance.
- Experience with QMS, 5S, and Root Cause Analysis.
- Advanced skills in CAD, 2D and or 3D, MS Office (Excel & PowerPoint) for data analysis and reporting.
Core Competencies
- Strong analytical skills with the ability to interpret complex technical documents and legal/financial reports.
- Ability to work independently while fostering cross-functional collaboration.
- A "bias for action" with the ability to prioritize tasks in a fast-paced, multi-requestor environment.
Travel
- Ability to perform minimal domestic and international travel as required.
Crown Equipment Corporation is one of the world’s largest material handling companies, with a reputation for award-winning product design, advanced engineering and technology, and superior after-sale service. Crown produces and sells a broad range of forklifts, batteries, chargers, automation and fleet management technologies that are revolutionizing the material-handling industry.
Job Responsibilities:
Lead the development, implementation, and performance of CAE, Simulation, FEA, Stability, and Structural Analysis tools that support validation of new and existing vehicles, systems, and components. Manage a team of engineers, guide technical decision‑making, and contribute directly to engineering solutions when needed. Reports to the Director or Senior Manager of Component Development.
- Product and Technology Champion - Lead development of new products and structural systems, approving technical solutions and driving innovation. Identify emerging technologies and competitive trends; recommend product, process, and tool improvements. Support Current Product Engineering, Service, Sales, Manufacturing, Purchasing, Quality, and Product Safety on issues related to masts, attachments, durability, and stability. Conduct product reviews to ensure competitive, innovative designs move to production.
- Project Planning, Supervision and Technical Review - Ensure engineering work meets product goals, industry standards, and sound engineering practices. Review and approve test results and production releases. Support budgeting, resource planning, and personnel decisions (hiring/termination).
- Employee Development - Perform duties such as creating/revising job descriptions, conducting Talent Development discussion sessions, rating performance, establishing/tracking goals and assisting in the completion of annual wage reviews. Responsible for coaching, motivating, mentoring, and developing direct reports to successfully take on additional responsibilities.
- Leadership and Communication - Ensure teams meet product, cost, and schedule targets. Collaborate with department leaders to resolve design direction, priorities, and resource needs. Communicate project and departmental updates to management via written and oral presentations. Perform other duties as assigned.
Minimum Qualifications:
- Bachelor degree in Mechanical Engineering, Aerospace Engineering, or related
- 16 years of product development experience, including mechanical design experience, project management, and supervision
- Skilled in finite element analysis (FEA), computer aided design (CAD), 3-D modeling, and simulation software; preferably Nastran, FEMAP, Simcenter, and NX CAD
- Good written, verbal, analytical, and interpersonal skills
- Ability to travel occasionally with overnight stays (0-5%)
- Valid driver license and reliable transportation to travel locally between company locations during scheduled workday
- Ability to learn operation of lift trucks
- Per 8-hour shift. Sit 8 hours and stand 0 hours. Both typical and non-typical office environment (low to moderate noise level, low exposure to hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking, and climbing stairs. Occasional use of office equipment (copiers, printers, etc.).
Preferred Qualifications:
- Working knowledge of the product series in lift truck design, industrial design and ergonomics
Work Authorization:
Indefinite U.S. work authorized individuals only. Individuals with temporary visas are ineligible. Sponsorship for work authorization, now or in the future, is unavailable.
No agency calls please.
Compensation and Benefits:
Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.
EOE Veterans/Disabilities
The Engineering Aide III supports engineering teams by applying engineering techniques, assisting with testing and inspections, performing light fabrication, and preparing documentation, reports, and analyses. This role is hands-on and lab-focused, providing essential operational and technical support to enable engineers to efficiently progress projects.
Key Responsibilities
- Support engineering projects by conducting inspections, analytical tests, and data analysis.
- Collect, analyze, synthesize, and summarize test data; generate reports, charts, and presentations.
- Assist with root cause analysis and support corrective actions.
- Prepare and modify drawings, schematics, and diagrams based on engineering direction.
- Build electrical/mechanical harnesses and perform light fabrication and assembly tasks.
- Set up and execute functional and environmental tests following provided test plans.
- Maintain quality standards through testing, process evaluation, and documentation.
- Track expenses and assist with basic cost-benefit analyses.
- Support lab operations, equipment setup, and general lab organization.
- Collaborate with multiple engineers, prioritize tasks, and communicate timelines clearly.
Required Skills & Qualifications
Education & Experience
- Associate’s degree in Engineering Technology or a related field
- Minimum 2+ years of relevant experience
- Internship experience may be considered
Technical Skills (Required)
- Ability to read and interpret schematics, diagrams, and drawings
- Experience hand-fabricating electrical or mechanical harnesses
- Familiarity with environmental testing (thermal chambers, vibration systems, pressure equipment, etc.)
- Proficiency with Microsoft Word and Excel for documentation and reporting
- Comfortable using standard hand tools for mechanical and electrical assembly/disassembly
- Basic understanding of engineering principles and manufacturing standards
Technical Skills (Desired)
- Light fabrication skills (sheet metal or similar methods)
- Experience with thermocouple instrumentation or thermal testing of electronics
- Basic PCB or SMT soldering experience (or willingness to learn)
- Exposure to procurement processes or laboratory purchasing
- Understanding of domestic and international shipping procedures
Soft Skills
- Strong verbal and written communication skills
- Highly organized and detail-oriented
- Strong analytical and problem-solving abilities
- Self-motivated with a proactive approach to work
- Team-oriented and able to work with multiple stakeholders
- Willingness to learn new tools, systems, and test methods
ZRG has been engaged to recruit an Assistant Vice President, Engineering and Energy for Columbia University
Columbia University’s location in Upper Manhattan places it at the intersection of academic excellence and urban vitality. Situated near renowned medical centers, research institutions, cultural landmarks, and policy organizations, the University benefits from deep connections across public, private, and nonprofit sectors. This proximity enhances opportunities for interdisciplinary collaboration, experiential learning, and meaningful engagement with communities locally and globally.
POSITION:
Reporting to the Vice President for Operations, the Assistant Vice President of Engineering and Energy is responsible for visionary and strategic energy services and programs for Columbia University. This position will direct, strategize, and implement energy management and engineering services for the campus buildings and Central Energy Plants totaling 9 million square feet. This includes master planning, conservation efforts, managing renewable energy portfolios, strategic procurement of natural gas and electricity, central plant oversight, State of Good Repair (SOGR) program management, and other engineering and energy-related strategic initiatives.
QUALIFICATIONS:
•Bachelor’s degree in engineering or related field required. Master’s degree in Engineering, MBA or other advanced degree preferred.
•Ten years of experience in utility infrastructure, university utility and facilities operations preferred; ten years of experience in related field.
•Demonstrated experience managing the operation and maintenance of central utility plants preferred.
•Minimum of seven years of environmental / sustainability experience including implementing environmental or sustainability programs, resource management, environmental initiatives, or equivalent experience.
•Demonstrated experience with energy, water, and waste conservation in buildings.
•Skilled in budget preparation, financial management, and analysis.
•A flexible, problem-solving approach to leadership.
•Demonstrated effective leadership skills within a complex, multilayered organization.
•Ability to think strategically and drive priority initiatives through the organization.
•Strategic planning skills. Ability to make administrative / procedural decisions and judgments required; Skills in examining and re-engineering operations and procedures, formulating policy, and developing and implementing new strategies and procedures.
•Ability to develop, plan, and implement short- and long-range goals.
•Sensitivity and diplomacy to balance competing campus interests.
•Computer literacy in Windows and Microsoft Office environments.
•Strong communication and presentation skills.
•Demonstrated ability to work with senior leadership.
•Demonstrated management skills with ability to relate to a diverse and complex operation and supervision of exempt and non-exempt staff.
•Utilization of principles of management to ensure responsibilities are met effectively and efficiently. This includes planning, controlling, leading, and organizing.
•Demonstrated skills in using sound analytic methods and ability to work with complex analytic issues.
•Ability to effectively interact with departmental staff, as well as campus and university-wide administrators.
•Excellent customer service skills and ability to effectively communicate within and outside of the department.
•Skill to effectively communicate orally, in writing, and electronically.
•Ability to maintain accuracy and attention to detail in a fast-paced environment of changing priorities.
•Respond promptly by phone or in person as appropriate to emergency situations and therefore 24/7 availability.
•Valid driver's license and successful completion of the University's Motor Vehicle Records background check process.
Job ID: 410396
Practice area:- IP - Patent - Computer Science,IP - Patent - Electrical Engineering,IP - Patent - Software
Patent Associate Attorney – Software / Electrical Engineering (2–6 Years Experience) | Am Law Firm | Denver, Colorado
Keywords:- Patent Associate Attorney, Intellectual Property Patent Attorney, Software Patent Attorney, Electrical Engineering Patent Attorney, Patent Attorney Denver, Denver legal jobs, Attorney jobs Denver CO, USPTO admission required, Law firm patent associate, Partner-track position, lawyer,Patent litigation, hard sciences, semiconductor, software litigation, hardware patent, computer science litigation, engineering patent dispute
This Amlaw firm values associates that are "all in" and is therefore leanly staffed, providing a fair amount of client contact amongst its associates. In addition, this firm offers a high amount of pro-bono opportunities, especially for first years. This firm values diversity and has a collaborative, social, work environment.
A prominent Am Law firm is seeking a Patent Associate Attorney (2–6 years experience) to join its innovative intellectual property practice in Denver, Colorado. This role offers the opportunity to work with emerging technologies while helping sophisticated clients develop and protect their intellectual property portfolios.
This Patent Associate Attorney opportunity focuses on advanced technology sectors including software, artificial intelligence, machine learning, consumer electronics, and data infrastructure. Attorneys pursuing Denver legal jobs in intellectual property will gain exposure to cutting-edge patent strategy while working with leading innovators and technology companies.
The Patent Attorney will collaborate with clients and technical teams to strengthen patent portfolios, interface with the United States Patent and Trademark Office (USPTO), and support complex IP matters. This partner-track position offers early responsibility, client interaction, and meaningful involvement in strategic IP protection initiatives.
This opportunity is actively interviewing candidates with strong technical backgrounds and patent prosecution experience.
________________________________________
Key Responsibilities
• Collaborate with clients to develop and expand intellectual property portfolios across emerging technology sectors.
• Prepare and prosecute patent applications before the United States Patent and Trademark Office (USPTO).
• Draft patent specifications, claims, and responses to office actions.
• Conduct legal and technical research related to software and electronics patents.
• Assist clients with patent portfolio strategy and IP protection initiatives.
• Negotiate agreements and settlements involving intellectual property rights.
• Work closely with engineers, developers, and product teams to identify patentable innovations.
• Draft legal documents and prepare technical analyses for patent filings.
• Support intellectual property transactions and licensing matters when needed.
________________________________________
Qualifications
• Juris Doctor (JD) from an accredited law school.
• USPTO admission required or eligibility to sit for the Patent Bar.
• 2–6 years of experience practicing as a Patent Associate Attorney or patent prosecution attorney.
• Degree in Electrical Engineering, Computer Science, Software Engineering, or related technical field preferred.
• Excellent academic credentials.
• Strong technical writing and analytical skills.
• Ability to communicate complex technical concepts clearly.
• Experience working within a law firm environment.
________________________________________
Education
• JD required.
• Degree in Electrical Engineering, Software, or Computer Science preferred.
________________________________________
Certifications
• USPTO admission or eligibility.
________________________________________
Skills
• Experience with consumer electronics, software systems, and web-based platforms.
• Familiarity with technologies such as generative AI, machine learning, data structures, and databases.
• Strong technical analysis and patent drafting skills.
• Excellent communication and interpersonal abilities.
• Ability to collaborate effectively with both legal and technical teams.
________________________________________
Culture & Firm Appeal
This opportunity is with a respected Am Law firm known for its collaborative culture and strong intellectual property practice. The firm maintains lean deal teams, providing associates with meaningful client exposure and direct involvement in strategic IP matters.
Associates benefit from a highly collaborative environment where mentorship, professional development, and teamwork are highly valued. The firm is also known for its strong commitment to diversity and inclusion, as well as its active pro bono programs.
For attorneys seeking Denver legal jobs in intellectual property law, this Patent Associate Attorney role provides the opportunity to work on cutting-edge technologies while building strong client relationships and technical expertise.
The firm's dynamic environment encourages innovation and supports attorneys who are motivated to grow their careers within a sophisticated intellectual property practice.
________________________________________
Why This Role Is Unique
• Work with cutting-edge technologies including AI, software platforms, and advanced electronics.
• Direct client interaction with innovative technology companies and startups.
• Exposure to sophisticated patent portfolio strategy and IP protection matters.
• Collaborative team structure with meaningful associate responsibility.
• Partner-track position within a nationally respected intellectual property practice.
• Ideal opportunity for attorneys seeking advanced Denver legal jobs in patent law.
This position rarely opens at this level and offers a unique opportunity to work at the intersection of law and emerging technology.
________________________________________
Call to Action
Apply now for a confidential discussion with a BCG Attorney Search recruiter.
Explore this elite-level opportunity today.
Submit your resume to learn more about this prestigious role.
________________________________________
BCG Attorney Search is the industry leader for placing candidates in permanent positions in law firms. Since 2000, our recruiters have placed several thousand attorneys and enjoyed extraordinarily high success rates with our candidates. As a BCG Attorney Search candidate, you have access to more opportunities than any legal placement firm in the United States. We are able to offer the most in-depth insight in the legal recruiting market thanks to our dedicated team of over 150 employees who mercilessly research, study and analyze the legal market. The depth and breadth of our research empowers us to place attorneys at rates that are unparalleled at any placement firm in the United States. Many of our recruiters make 30 to 40 placements per year, while recruiters at competitor firms are likely to make four or five. Unlike other placement firms that can only tell you about openings at major AmLaw firms, we place candidates of all backgrounds in firms of all sizes. While other legal recruiters only represent a narrow band of candidates from top law firms and top law schools, our research, firm contacts, and market insight allow us to place hundreds of candidates each year who do not fit this mold. It is rare that we do not get candidates we represent interviews and offers. No one in the world is better at legal recruiting and placement than BCG Attorney Search.
BCG Attorney Search will confidentially review your application and will not forward your materials to the firm without first discussing the opportunity with you.
