Spanaflight Aviation Jobs in Usa
1,210 positions found — Page 10
Spécialiste d'accessoires électrique Classe B
Montreal, QC, Canada
Une opportunité intéressante pour un Ingénieur équipements d'essai pour l'aviation civile s'est présentée dans nos installations de Montréal. Dans ce rôle, vous serez responsable de l'inspection préliminaire, des réparations, du montage et de l'inspection finale de tous les genres d'accessoires électriques que la Compagnie décide de réparer ou réviser. C'est un employé qui recevra des instructions de travailler seul ou d'aider un spécialiste d'accessoires électriques classe 'A' dans l'accomplissement des fonctions ci-haut mentionnés.
Partenaire de confiance au Canada
Depuis plus de 75 ans, Rolls-Royce a solidement établi sa présence au Canada. Nous sommes reconnus comme le centre d'excellence mondial en MRO (Maintenance, Réparation, Révision) des moteurs d'avions d'affaires Rolls-Royce, ayant entretenu plus de 6 300 moteurs qui volent dans le monde entier dans le secteur des jets d'affaires et privés. Nous recherchons des personnes talentueuses pour nous rejoindre.
À notre usine de Lachine, nous comptons actuellement 600 employés. Nous recherchons des personnes techniques compétentes et motivées pour rejoindre notre équipe soudée et nous aider à réaliser notre ambitieux plan de croissance. Ce plan est crucial pour nous permettre de rester à l'avant-garde des besoins de nos clients et d'innover continuellement.
Ce que vous obtiendrez
Salaire très compétitif
L'un des régimes de retraite à cotisation définies les plus compétitifs
Régime d'assurance maladie et dentaire collectif flexible
Nombre généreux de jours personnels par an
Banque de temps flexible
Plusieurs congés payés
Club social
Opportunité d'avancement
Un programme de référence d'employés, où vous pouvez gagner 1 000 $ par référence.
Stationnement gratuit sur place +borne de recharge pour voitures électriques
Service de cafétéria
Exigences de base:
Diplôme d'études secondaire
Attestations d'études collégiales (AEC) de l'École Nationale d'Aérotechnique (ÉNA) préférée ou Diplôme d'études professionnelles (DEP) de l'École des métiers de l'aérospatiale de Montréal (EMAM) (la formation et l'expérience militaires équivalentes seront considérées).
Doit être citoyen canadien ou résident permanent
Bilingue français et anglais
Innover et propulser le monde
Chez Rolls-Royce, nous sommes les pionniers de la puissance qui compte pour nos clients, pour la société et pour la planète.
Nous fournissons les meilleurs moteurs à réaction au monde. Grâce à une innovation intelligente et à une collaboration active, nous plaçons nos clients à l'avant-garde de l'industrie aéronautique - et nous les y maintenons. Notre portefeuille de produits équipe plus de 35 types d'avions commerciaux et compte plus de 13 000 moteurs en service dans le monde ; nous faisons voler le monde.
Pionnier de l'innovation de nouvelle génération.
Rejoignez-nous et vous développerez vos compétences et votre expertise au plus haut niveau, en travaillant dans un environnement international pour une entreprise connue dans le monde entier pour son génie.
Nos gens sont notre pouvoir
Nous sommes un employeur garantissant l'égalité des chances. Nous nous engageons à développer une main-d'œuvre diversifiée et un environnement de travail inclusif. Nous pensons que des personnes d'horizons et de cultures différentes nous offrent des perspectives variées. Et plus nous aurons de perspectives, plus nous réussirons. En créant une culture de respect et d'appréciation, nous donnons à tous ceux et celles qui travaillent ici la possibilité de réaliser leur plein potentiel.
Vous pouvez en savoir plus sur notre stratégie d'inclusion mondiale sur .
Chez Rolls-Royce, nous adoptons la flexibilité du lieu de travail. Nos équipes travaillent dans des environnements de travail sur site, hybrides et à distance en fonction des exigences professionnelles et personnelles. Les dispositions spécifiques varient d'une équipe à l'autre. Veuillez nous demander comment nous travaillons dans cette équipe.
L'aide à la réinstallation n'est pas disponible pour ce poste.
Seuls les candidats sélectionnés seront contactés.
--------------------------------------------------------------------------------------------------------------------------------
Electrical Accessory Specialist Class B
Montreal, QC, Canada
An interesting opportunity for a civil aviation Electrical Accessory Specialist Class B has arisen in our Montreal facilities. In this role, you will be responsible for preliminary electrical inspections, repairs, assembly, and final electrical inspections of all types of electrical accessories that the Company shall see fit to overhaul or repair. They shall receive instructions to perform alone or to assist a Class 'A' Electrical Accessory Specialist in the performance of the above duties.
Trusted partner in Canada
For over 75 years, Rolls-Royce has firmly established its presence in Canada. We are recognized as the world-wide Centre of Excellence in the MRO (Maintenance, Repair, Overhaul) of Rolls-Royce Business Aircraft engines, having serviced over 6,300 engines that fly around the globe in the business and private jet sector. We are looking for talented individuals to join us.
At our facility in Lachine, we currently have 600 employees. We're seeking skilled and driven technical individuals to join our tight-knit team and assist us in achieving our ambitious growth plan. This plan is crucial for us to remain at the forefront of our clients' needs and to continuously innovate.
What you will get
Highly competitive salary.
One of the most competitive Defined Contributions pension plans.
Flexible Group Health & Dental Benefits plan.
Generous number of personal days per year.
Flexible time bank.
Several paid holidays.
Social Club.
Advancement opportunities
An Employee Referral Program, where you can earn 1000$ per referral.
Free onsite parking +charging station for electrical cars.
Onsite cafeteria.
Basic Requirements:
• High school diploma
• (ACS) Attestation of College Studies from, l'École Nationale d'Aérotechnique (ÉNA) preferred or Diploma of Vocational Studies (DVS) from l'École des métiers de l'aérospatiale de Montréal (EMAM) (equivalent military training and expereince will be considered)
• Must be Canadian citizen or permanent resident
• Bilingual in French and English
Innovate & Power the world
At Rolls-Royce, we pioneer the power that matters to our customers, to society and to the planet.
We deliver the best jet engines in the world. Through intelligent innovation and active collaboration, we're putting our customers at the forefront of the aviation industry - and we keep them there. Our product portfolio powers more than 35 types of commercial aircraft, and with over 13,000 engines in-service around the world; we're keeping the world flying.
Pioneer beyond tomorrow.
Join us and you'll develop your skills and expertise to the very highest levels, working in an international environment for a company known the world over for brilliance and innovation.
Our People are our Power
We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realize their full potential.
You can find out more about our global inclusion strategy at .
At Rolls-Royce we embrace workplace flexibility. Our teams work in onsite, hybrid and remote work environments based on work and personal requirements. The specific arrangements vary from team to team. Please ask us about how we work on this team.
Relocation assistance is not available for this position.
Only selected candidates will be contacted.
#CLOLI
#CLODEF
Job Category
Factory Staff
Posting Date
09 févr. 2026; 00:02PandoLogic. , Location: Montreal, QC - H2S 1Y8
Machiniste Classe B
Montreal, QC, Canada
Une opportunité intéressante pour un Machiniste Classe B pour l'aviation civile s'est présentée dans nos installations de Montréal. Dans ce rôle, vous serez responsable de travailler avec compétence à partir de croquis, de schémas et de dessins de pièces et faire des réglages sur les machines. Vous utiliserez les instruments de mesure afin d'assumer la responsabilité et la qualité de votre travail. Vous utiliserez vos connaissances en programmation CNC pour créer, modifier ou optimiser des programmes. Enfin, vous participerez à la recherche et au développement d'outils et d'accessoires nécessaires à la production.
Innover et propulser le monde
Chez Rolls-Royce, nous sommes les pionniers de la puissance qui compte pour nos clients, pour la société et pour la planète.
Nous fournissons les meilleurs moteurs à réaction au monde. Grâce à une innovation intelligente et à une collaboration active, nous plaçons nos clients à l'avant-garde de l'industrie aéronautique - et nous les y maintenons. Notre portefeuille de produits équipe plus de 35 types d'avions commerciaux et compte plus de 13 000 moteurs en service dans le monde ; nous faisons voler le monde.
Partenaire de confiance au Canada
Depuis plus de 75 ans, Rolls-Royce a solidement établi sa présence au Canada. Nous sommes reconnus comme le centre d'excellence mondial en MRO (Maintenance, Réparation, Révision) des moteurs d'avions d'affaires Rolls-Royce, ayant entretenu plus de 6 300 moteurs qui volent dans le monde entier dans le secteur des jets d'affaires et privés. Nous recherchons des personnes talentueuses pour nous rejoindre.
À notre usine de Lachine, nous comptons actuellement 600 employés. Nous recherchons des personnes techniques compétentes et motivées pour rejoindre notre équipe soudée et nous aider à réaliser notre ambitieux plan de croissance. Ce plan est crucial pour nous permettre de rester à l'avant-garde des besoins de nos clients et d'innover continuellement.
Ce que vous obtiendrez
Salaire très compétitif
L'un des régimes de retraite à cotisation définies les plus compétitifs
Régime d'assurance maladie et dentaire collectif flexible
Nombre généreux de jours personnels par an
Banque de temps flexible
Plusieurs congés payés
Club social
Opportunité d'avancement
Un programme de référence d'employés, où vous pouvez gagner 1 000 $ par référence.
Stationnement gratuit sur place + borne de recharge pour voitures électriques
Service de cafétéria
Principales responsabilités :
Lavage simple (en cours)
Ébavurage
Polissage de base
Inspection pendant le processus
Déplacer du matériel à l'intérieur de la cellule ou du service
Exigences de base :
Un diplôme (DEP) en technologie d'usinage.
Un diplôme ASP en usinage sur machine-outil CNC ou formation complémentaire (un atout)
Capacité à travailler sur des machines conventionnelles et CNC
3 à 5 ans d'expérience pertinente
Bilingue français/anglais (écrit et parlé)
Doit être citoyen canadien ou résident permanent du Canada
Qualifications préférées :
Expérience dans l'usinage des plastiques, des métaux et des matériaux exotiques
Une maîtrise de la lecture des plans et de l'utilisation des instruments de mesure
Capacité d'interpréter les paramètres de coupe et les conditions recommandées par les fabricants d'outils
Capacité à analyser les données techniques
Vous êtes rigoureux, autonome et polyvalent.
Pionnier de l'innovation de nouvelle génération.
Rejoignez-nous et vous développerez vos compétences et votre expertise au plus haut niveau, en travaillant dans un environnement international pour une entreprise connue dans le monde entier pour son génie.
Nos gens sont notre pouvoir
Nous sommes un employeur garantissant l'égalité des chances. Nous nous engageons à développer une main-d'œuvre diversifiée et un environnement de travail inclusif. Nous pensons que des personnes d'horizons et de cultures différentes nous offrent des perspectives variées. Et plus nous aurons de perspectives, plus nous réussirons. En créant une culture de respect et d'appréciation, nous donnons à tous ceux et celles qui travaillent ici la possibilité de réaliser leur plein potentiel.
Vous pouvez en savoir plus sur notre stratégie d'inclusion mondiale sur .
Chez Rolls-Royce, nous adoptons la flexibilité du lieu de travail. Nos équipes travaillent dans des environnements de travail sur site, hybrides et à distance en fonction des exigences professionnelles et personnelles. Les dispositions spécifiques varient d'une équipe à l'autre. Veuillez nous demander comment nous travaillons dans cette équipe.
L'aide à la réinstallation n'est pas disponible pour ce poste.
Seuls les candidats sélectionnés seront contactés.
--------------------------------------------------------------------------------------------------------------------------------
Machinist Class B
Montreal, QC, Canada
An interesting opportunity for a civil aviation Machinist Class B has arisen in our Montreal facilities. In this role, you will be responsible to work competently from sketches, diagrams and drawings of parts, and to make adjustments to the machines. You will be using the measuring instruments in order to take the responsibility and quality of your work. You will use your knowledge of CNC programming in order to create, modify or optimize programs. Finally, you will assist in the research and development of tools and accessories necessary for the production.
Innovate & Power the World
At Rolls-Royce, we look beyond tomorrow. We continually pioneer integrated power and propulsion solutions to deliver cleaner, safer, and more competitive power.
We deliver the best jet engines in the world. Through intelligent innovation and active collaboration, we're putting our customers at the forefront of the aviation industry - and we keep them there. Our product portfolio powers more than 35 types of commercial aircraft, and with over 13,000 engines in-service around the world - we're keeping the world flying.
Trusted partner in Canada
For over 75 years, Rolls-Royce has firmly established its presence in Canada. We are recognized as the world-wide Centre of Excellence in the MRO (Maintenance, Repair, Overhaul) of Rolls-Royce Business Aircraft engines, having serviced over 6,300 engines that fly around the globe in the business and private jet sector. We are looking for talented individuals to join us.
At our facility in Lachine, we currently have 600 employees. We're seeking skilled and driven technical individuals to join our tight-knit team and assist us in achieving our ambitious growth plan. This plan is crucial for us to remain at the forefront of our clients' needs and to continuously innovate.
What you will get
Highly competitive salary
One of the most competitive Defined Contributions pension plans
Flexible Group Health & Dental Benefits plan
Generous number of personal days per year
Flexible time bank
Several paid holidays
Social Club
Advancement opportunities
An Employee Referral Program, where you can earn 1000$ per referral
Free onsite parking + charging station for electrical cars
Onsite cafeteria
Key Accountabilities:
Simple washing (in the process)
Deburring
Basic polishing
Inspection during the process
Moving material inside the cell or department
Basic Qualifications:
A diploma (DEP) in machining technology.
An ASP diploma in CNC machine tool machining or additional training (an asset)
Ability to work on conventional and CNC machines
3 to 5 years of relevant experience
Bilingual French / English (written and spoken)
Must be Canadian Citizen or permanent resident of Canada
Preferred Qualifications:
Experience in machining plastics, metals and exotic materials
A mastery of the reading of plans and the use of measuring instruments
Ability to interpret cutting parameters and conditions recommended by tool manufacturers
Ability to analyse technical data
You are rigorous, autonomous and versatile.
Pioneer beyond tomorrow.
Join us and you'll develop your skills and expertise to the very highest levels, working in an international environment for a company known the world over for brilliance and innovation.
Our People are our Power
We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realize their full potential.
You can find out more about our global inclusion strategy at .
At Rolls-Royce we embrace workplace flexibility. Our teams work in onsite, hybrid and remote work environments based on work and personal requirements. The specific arrangements vary from team to team. Please ask us about how we work on this team.
Relocation assistance is not available for this position.
Only selected candidates will be contacted.
#CLODEF
#CLOLI
Job Category
Factory Staff
Posting Date
05 janv. 2026; 00:01PandoLogic. Keywords: Machinist, Location: Montreal, QC - H2S 1Y8
REQUIREMENTS AND PREFERENCES
The Broward County Board of County Commissioners is seeking qualified candidates for the position of Risk Manager in the Aviation Administration - Risk Management section.
2026 Benefits of Broward County Employment
Eleven (11) paid holidays each year
Vacation (Paid Time Off) = 2 weeks per year
Tuition Reimbursement (Up to 2K annually)
Up to 40 hours of Job Basis Leave for eligible positions
Paid Parental Leave
Health Benefits
High-Deductible Health Plan - bi-weekly premiums: Employee $10.90 / Family $80.79
Includes a County Funded Health Savings Account of up to $2000 Annually
Consumer Driven Health Plan - bi-weekly premiums: Employee $82.58 / Family $286.79
Florida Retirement System (FRS) - Pension or Investment Plan
457 Deferred Compensation County matches up to $2,000 a year
General Description
The Aviation Department which operates the Fort Lauderdale-Hollywood International Airport and the North Perry Airport is seeking qualified applicants for the position of Risk Manager for the Risk Management section within the Administration Division. The Risk Manager will serve as the cornerstone of BCAD's risk management program, ensuring the airport is protected from liability by evaluating risk exposures, reviewing and negotiating complex contracts, and establishing and enforcing insurance requirements and renewals for all vendors and third parties. It provides critical oversight of procurement activities, analyzes bid documents, and safeguards compliance through the monitoring of Certificates of Insurance. The role also represents the airport's risk management interests in high-stakes meetings with airlines and key vendors, supports County departments with insurance guidance and trains staff across multiple divisions. With its blend of technical insurance expertise, legal interpretation, contact analysis, and staff leadership, this position is integral to minimizing financial exposure and maintaining continuity in BCAD operations. The employee will function as the Safety Management System Coordinator for Landside Operations in conjunction with the Operations Division. This position will supervise a loss and safety team on our construction sites and will ensure Occupational safety and health training and education program tracking.
Plans, develops, implements and maintenance of an airport Safety Management System (SMS), which includes - SMS anonymous reporting, tracking, investigation, and audits; facilitation of the safety risk management (SRM) process; conducting safety assurance meetings and inspections; and providing safety promotion initiatives and incentives; as well as Gap Analysis, Data Collection Review and Synthesis, Updates, Committee Meetings, Safety Assurance Evaluations, and SMS manual and related policies and procedures updates.
This position will work closely with the Operations Division and Maintenance Division regarding employee safety issues and the general risk and safety conditions of the airport. Walk job sites, review reports, and meet with contractors and PMs to resolve safety hazards and OSHA non-compliance. Another important function is to establish and maintain relationships across lines of business as well as with BCAD's partners, including but not limited to BSO, Concessions, Airlines, Ground Handlers, Fuel Farm, Fire and Rescue.
Manages insurance renewals for BCAD and vendor insurance review; mediate claims between attorneys, claimants, and insurance companies; investigate backup for claims and secure additional documentation as needed; liability and subrogation claims. public records request process and review of video requests.
Reviews Loss Control and collaborates with all BCAD divisions and various partners to ensure risk is reduced.
Training and educating expanding community (700+) BCAD employees on compliance and safety standards.
Minimum Education and Experience Requirements
Requires a Bachelor's degree from an accredited college or university with major coursework in business or public administration, risk management, construction project management, occupational safety, or closely related field
One year of relevant experience may be substituted for each year of required education.)
Requires three (3) years of experience in an administrative capacity reviewing and evaluating safety programs, conducting worksite safety evaluations for loss prevention, performing risk management analysis and claims oversight and review.
Special Certifications and Licenses
Must possess a valid Florida Driver's License with authority to drive a county vehicle for the duration of appointment.
2-20 Property and Casualty License
Certified Safety Management Practitioner (CSMP)
Occupational Hygiene and Safety Technician (OHST)
Construction Health and Safety Technician (CHST)
Certified Safety and Health Manager (CSHM)
Construction Risk and Insurance Specialist (CRIS)
Certified Safety Professional (CSP)
PreferencesDoctorate Degree in Law, Safety, Business, Insurance
Master's degree in risk management, Safety, Construction, Business or Public Administration
Associate in Risk Management - Public (ARM-P)
Chartered Property Casualty Underwriter (CPCU)
Underwriter experience or insurance agent or insurance broker license
Certified Risk Management (CRM)
Certified Risk Management Professional (CRMP)
Minimum one (1) year of prior experience with Wrap Up (OCIP) insurance programs
Minimum one (1) year of prior experience analyzing contracts to determine insurance requirements
**All Aviation Department employees must possess the ability to interact courteously with the public, Airport vendors, contractors and fellow employees to maintain a professional work atmosphere by acting and communicating in a manner that promotes a positive work environment and to support the completion of work and tasks internally and externally in an efficient and effective manner.
SCOPE OF WORK
The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.
Oversee the safety program's continued growth implementation review. To be the liaison with all departments for safety. Will also be responsible for reviewing and categorizing incoming issues through maximo (NON 139 SMS items).Implements and maintains automated Certificate of Insurance (COI) tracking system. Trains other Departments on utilization of the COI tracking system. Performs audits on certificates of insurance to determine compliance with insurance requirements.
Coordinates with Emergency Services and Communications, local, state and federal officials regarding FEMA guidelines and regulations.
Maintain information on BCAD's insurance policy and support the renewal process yearly. Utilize information and safety data collected to identify safety issues and help to mitigate claims, focus in on reoccurring issues and potential necessary projects training or other avenue to support the removal, mitigation or support for the identified safety risks.
Oversee the implementation of the new software (CTrax), when up and running, which is meant to track certificates of insurance and contractors.
Coordination with Director on regular basis to create strategies to support the forward movement in the areas of safety and insurance.
Exposure to Safety Management System (SMS) concepts or a readiness to learn and apply SMS practices in an airport environment.
Handle liability and subrogation claims; respond to public records requests and save and view video requests; training and educating expanding community (650+) BCAD employees on compliance and safety standards.
Plans, develops, authorizes, implements, supervises and evaluates programs/projects, activities and services on a large scale with County-wide impact; facilitates inclusion, prepares reports, and analyzes and interprets data.
Coordinates and manages all aspects of a program or project which has operational responsibility of a major scope, a large-sized budget and provides a critical County service.
Assists Director and Agency Leadership by researching issues, creating memorandums, policies, procedures, reports, etc. and monitors/advises on staff compliance with policy and procedures.
Conducts special research in conjunction with a project/program, analyzes data, and makes recommendations based upon research.
Identifies and understands agency/business needs, contractual business requirements, and regulations governing local, state and other requirements, confidentiality obligations, warranties, liabilities, indemnification, termination clauses, breach, and remedies.
Communicates business risks to project manager, senior/executive management, and approving authority for assessment and approval, while focusing on comprehending client-agencies' needs and business processes.
Coordinates with state and local agency partners on projects and programs, community outreach, media relations and regional and various services; may assist with press releases and responses to media.
Advises and assists the Department and Division Directors on all operational and technical matters related to the section(s) or function(s) assigned.
Reviews property claims and submits to insurance broker, communicates with attorneys as required.Participate in meetings involving contract negotiations, insurance requirements, sunshine meetings, risk assessment, claim reviews, and Risk Management Division meetings.
Monitor legislative decisions concerning property, casualty and liability issues, and rules and regulations potentially impacting the County.
Supervises, trains, develops, and motivates staff. Meets regularly with staff, to maintain open communications, ensure adequate workload, and update standard procedures.
Advises and educates other agencies on the risk management process and the importance of Enterprise Risk Management (ERP) to the County. Supports the Risk Management Information System (RMIS) by maintaining the Property Schedule and insurance policies.
Defines agency goals and objectives, develops and recommends policies and operating procedures.
Administers internal/external communications and public outreach activities for Division; manages and coordinates outreach efforts with other County divisions as well as other local and state governments and partnering agencies.
Prepares Commission agendas, including editing, posting and planning.
Provides assistance and training of agency staff and contracted services providers. May oversee the Agency's training program; schedules and/or delivers training and outreach opportunities for employees and the vendor community respectively.
Plans, organizes and implements a compliance and monitoring program, conducts contract central audits, field documentation reviews, investigations or management studies.
Oversees claim activity to ensure proper adjudication of claims in compliance with State regulations. Ongoing coordination of claims coverage to ensure proper investigation, treatment, and loss prevention actions are taken.Attends meetings which include contract negotiations, sunshine meetings, risk assessment, claim reviews, department meetings, both downtown risk and facility; participates in the negotiations and purchase of insurance coverage applicable to the facility or project.
Oversees/handles data collection from other agencies, inputting into system, refinement of procedures for handling, advising/educating other agencies on the process and what's important and how it affects them.
Performs related work as assigned.
WORK ENVIRONMENT
Physical Demands
Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.
Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.
Unavoidable Hazards (Work Environment)Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.
None.
SPECIAL INFORMATION
Competencies
- Business Insight
- Financial Acumen
- Manages Complexity
- Cultivates Innovation
- Optimizes Work Processes
- Ensures Accountability
- Builds Networks
- Builds Effective Teams
- Communicates Effectively
- Situational Adaptability
County Core ValuesAll Broward County employees strive to demonstrate the County's four core behavioral competencies.
- Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
- Customer focus: Building strong customer relationships and delivering customer-centric solutions.
- Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
- Values differences: Recognizing the value that different perspectives and cultures bring to an organization.
Americans with Disabilities Act (ADA) ComplianceBroward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.
Emergency Management ResponsibilitiesNote: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.
County-wide Employee ResponsibilitiesAll Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.
All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.
We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Hardware Test Engineer at Reliable Robotics, you will be a key part of the Hardware Test team. This is a small team of broadly experienced engineers that strive to ensure that all hardware being produced meets the stringent requirements for aviation. Hardware Test Engineers are one of the essential interfaces between the design, production, and flight test teams and are exposed to a wide variety of technical challenges.
You will be creating automated test stands to replicate extreme flight conditions on our hardware and mechanisms that will serve as the backbone of our qualification testing. You will help to break our development hardware, help root-cause the failure modes, and provide critical input in redesigning it. You will be writing the software and building the hardware platforms for the command, control and data collection systems that will test our systems to rigorous aerospace standards.
Responsibilities
Full ownership of the design, build, and maintenance of mechanical or electrical test stands for development testing, production acceptance testing, functional and environmental qualification testing
Automate the repetitive aspects of the test stands
Author, execute, and audit test plans, procedures, and reports
Work closely with design engineers and flight test engineers to design, build, test and improve flight hardware
Basic Success Criteria
B.S. Degree in Mechanical, Electrical, Aerospace, Computer Science, Software Engineering or equivalent industry experience
1+ year of industry experience testing hardware
Experience using ECAD tools such as Altium or MCAD tools such as NX
Comfort with basic software scripting in Python, C/C++, or MATLAB
Working understanding of mechanical or electrical engineering fundamentals
Eagerness for hands-on work - integration of sensors, building test fixtures, diagnosing and debugging equipment and hardware
Ability to methodically diagnose, document, and solve hardware problems
A demonstrated passion for mechanical, electrical, or electromechanical hardware
Preferred Criteria
2+ years experience in aerospace hardware test planning and execution
Experience working on and around aircraft
Knowledge of aerospace qualification testing standards (MIL-STD-810, RTCA DO-160, or similar) and the aircraft certification process
Experience reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation
Familiarity with test instrumentation and data collection methods such as NI DAQ, UEI DAQ, LabJack, etc.
Working understanding of measurement and data analysis; ability to clearly present technical data and state its limitations
Demonstrated proficiency building/fabricating machine parts, cable assemblies, or other testing, integration, or assembly experience
As a member of our team, you will be a pivotal contributor to the development of novel hardware that will transform the future of flight. From component level thermal testing to instrumenting our aircraft with a sensor suite for flight testing, you will closely interface with many vital parts of our system. The cross-functional nature of this role also lends itself to mentoring opportunities across the entire company.
This role is located onsite at our HQ in Mountain View, CA.
Must be willing to travel 10% of the time.
The estimated salary range for this position is $118,000 to $170,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $118K - $170K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Supplier Development Engineer at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our mechanical supplier engineering processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for sourcing, qualifying, and troubleshooting all machining and sheet metal products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.
Responsibilities
Develop and manage supplier relationships to ensure they meet or exceed manufacturing, testing, inspection, quality, performance, and reliability requirements
Develop design for excellence (DFx) processes, and conduct reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements
Develop supplier qualification processes and conduct regular reviews
Collaborate with design, quality, and certification teams to embed producibility/manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)
Develop quality control plans and inspection infrastructure, including dimensional inspection and functional testing
Develop and ensure compliance with all policies, procedures, quality management systems, and engineering change orders
Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained
Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability
Basic Success Criteria
Bachelor's degree in mechanical, aerospace engineering, or a related field of study
5+ years of manufacturing, design, and/or testing experience
2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as NX and Teamcenter
Geometric Dimensioning and Tolerancing (GD&T) experience
Coordinate Measuring Machine (CMM) experience
Preferred Success Criteria
Experience with CNC machinery (lathe, mill, waterjet, laser cutter, EDM)
Precision sheet-metal or plastic molding tooling design experience
Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145
Research and Development (R&D) or New Product Introduction (NPI) experience
Previous leadership or management experience
Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment
Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.
This role will be located at our facility in Mountain View, California.
Must be willing to travel 25% of the time.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $132K - $200K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Radar Hardware Design Engineer, you will be a part of our Radar Engineering team. The Radar Engineering team is comprised of a small cross-functional team of motivated and experienced engineers; we're responsible for designing, building, and testing cutting-edge phased array radar systems from concept to certified product. We enjoy a culture of sharing information and collaboration. Phased array radar systems have historically been reserved for specialized applications, but we're making this technology affordable to enable Detect and Avoid for widespread commercial applications. This role will focus on new advanced operational modes. The passion for revolutionary technology to make aviation safer motivates us to come in every day.
Responsibilities
In your role as a Radar Design Engineer, you will be responsible for designing digital and analog circuits for our next-generation Radar system. You will be involved in all phases of development, from conception to production, tracing system-level requirements through to circuit-level design. You will drive the design and layout of a multi-processor with an FPGA on chip using DDR 4 memory, as well as designing switching and linear power supplies. The high-speed digital design is complemented by high-frequency analog and RF design up to 12GHz. You will own the schematic, layout, artwork generation and bring-up of hardware. You will be collaborating with the cross-functional teams, including mechanical and system engineering. You will be responsible for the certification of your design to DO-160, DO-254 design assurance and FCC certification. You will support radar system integration and testing in the engineering lab and on the aircraft.
Basic Success Criteria
Electrical Engineering fundamentals, typically gained through a Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or a related discipline
5+ years of professional hands-on experience with high-speed digital circuits, linear and switching power regulator circuits, PLL's, VGA, mixers etc.
Ability to use Circuit simulators, Altium schematic capture and layout, and SPICE simulation software
Ability to troubleshoot, find root cause, and resolve issues
Experienced in using oscilloscopes, logic analyzers, spectrum analyzers and Vector Network Analyzers
Preferred Criteria
Advanced Degree of Science or Electrical Engineering
Experience developing system architectures and managing requirements for certification of Avionics
Creative problem solver that can bring multiple disciplines together, with the ability to assess risk and make design and development decisions without all available data
Experience integrating and troubleshooting various electronic sensors and components
RF circuit design experience up to 12GHz
DO-160 and DO-254 hardware design assurance experience
This position will be located at our facility in Mountain View, California.
Must be willing to travel 10% of the time.
The estimated salary range for this position is $190,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $190K - $250K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As an Electrical Systems Engineer, you will be a part of our Vehicle Design and Integration team. Your work will help bring together mechanical, electrical, navigation, control, and safety requirements to produce complex electrical systems that are key to the success of our efforts to automate aviation. You'll collaborate with a broad set of teams to develop a system architecture and incorporate requirements across the hardware/software stack.
Responsibilities
In your role as an Electrical Systems Engineer, you will be responsible for refining and implementing our Avionics system architecture and driving its physical implementation. You will drive the system-level design, testing, and integration of avionics hardware, including computing, sensing, actuation, communication, power, and display systems. You will work across engineering teams and will implement an electrical system design that meets system-level and certification requirements. You will be the owner of multiple components (IMUs, air data computers, batteries) and will be responsible for how they are installed in the aircraft, verified, and certified at the aircraft level.
Basic Success Criteria
Electrical Engineering fundamentals, typically gained through a Bachelor's Degree of Science or Engineering in Electrical, Mechanical, Aerospace, or related discipline
Hands-on experience with electrical system development, integration, or testing
Ability to work within a team, including strong written and verbal communication skills
Ability to troubleshoot, find root cause, and resolve issues in a safety critical environment
Preferred Criteria
Advanced Degree of Science or Engineering in Electrical, Mechanical, Aerospace, or related discipline
Experience integrating and troubleshooting complex electronic sensors, actuators, computing, and wiring into complex vehicle-level systems.
Creative problem solver that can bring multiple disciplines together with the ability to assess risk and make design and development decisions without all available data
Experience designing, drafting, and building aerospace wiring harnesses, including using ECAD tools such as E3, VeSys, IGE+XAO
We're a growing, motivated, fast-paced team of avionics professionals. We move quickly, and everyone wears multiple hats. We're looking for someone who is diligent and detail-oriented who can join our team and make an immediate impact.
The position will be located at our facility in Mountain View, California. Must be willing to travel up to 10% of the time.
At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity. In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $118K - $170K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Sr. Manufacturing Engineer (Mechanical) at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our manufacturing, installation, and supply chain processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for designing the build and installation process for mechanical, electromechanical, and/or electrical/avionics products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.
Responsibilities
Responsible for building, installing, testing, diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, interconnects, and other commercial-off-the-shelf (COTS) products
Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements
Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)
Develop and ensure compliance with all policies, procedures, quality management system, and engineering change orders
Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained
Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability
Basic Success Criteria
Bachelor's degree in mechanical, electrical, aerospace, or systems engineering
7+ years of manufacturing, design, and/or testing experience
2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter
Preferred Criteria
Research and Development (R&D) or New Product Introduction (NPI) experience
Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145
Previous leadership or management experience
Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment
Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.
The position will be located at our facility in Mountain View, California.
Must be willing to travel 10% of the time.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $167K - $230K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Manufacturing Manager at Reliable Robotics, you'll be responsible for manufacturing capacity and throughput, factory development and layout, leading a team of engineers and technicians, and improving our manufacturing processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will have overall accountability for the manufacturing output of a broad portfolio of products, including mechanical, electromechanical, and/or electrical/avionics assemblies. You will also be responsible for leading hiring activities, managing manufacturing layout, equipment maintenance, optimizing manufacturing flow, ensuring tooling and and working with engineering on design for excellence (DFx) improvements. They also handle workforce development, production scheduling, risk mitigation, and performance monitoring to meet production targets. You are responsible for establishing the standards by which this team would operate, and for transitioning the organization from a start-up into a disciplined manufacturing organization. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.
Responsibilities
Responsible for building, testing, troubleshooting/diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, and interconnects
Lead, coach, and provide technical mentorship to a team of engineers and technicians; write bi-annual reviews and manage the team's performance
Lead hiring, recruitment, and training for the technician team
Lead efforts to transition our products from engineering development to production
Ensure design for excellence (DFx) is communicated to the engineering and drive implementations across all manufacturing areas to improve cost, producibility, inspectability, consistency, adequacy, accuracy, and achieve conformance to requirements
Responsible for maturing the manufacturing factory and layout, including optimizing material flow, factory equipment (e.g., tooling, inspection, test, etc.) maintenance, tooling, automation, and business system
Monitor and communicate manufacturing status and risks, and establish key performance metrics to meet manufacturing targets
Partner with design, engineering, supply chain, and other departments to synchronize project plans and ensure manufacturing can meet demand
Develop and ensure compliance with all policies, procedures, quality management systems, and engineering change orders
Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained
Ensure root-cause analysis is implemented and timely corrective actions are taken to maintain schedule, quality, and reliability
Basic Success Criteria
Bachelor's degree in mechanical, electrical, aerospace, or systems engineering
5+ years of manufacturing, design, and/or testing experience
3+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter
Strong leadership, communication, team-building, and problem-solving skills
Preferred Success Criteria
Experience with assembly, machining, fabrication, soldering, Electro-Static Discharge (ESD), Foreign Object Debris (FOD), and test methods
Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment
Research and Development (R&D) or New Product Introduction (NPI) experience
Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145
Previous leadership or management experience
Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.
The position will be located at our facility in Mountain View, California.
Must be willing to travel 10% of the time.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $130K - $195K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Sr. Hardware Test Engineer at Reliable Robotics, you will be a critical part of the Hardware Test team. This is a small team of broadly experienced engineers that strive to ensure that all hardware being produced meets the stringent requirements for aviation. You will be one of the essential interfaces between the design, production, and flight test teams and will be exposed to a wide variety of technical challenges.
You will be architecting automated test stands to replicate extreme flight conditions on our hardware and mechanisms that will serve as the backbone of our qualification testing. You will help to break our development hardware, help root-cause the failure modes, and provide critical input in redesigning it. You will be writing the software and building the hardware platforms for the command, control and data collection systems that will test our systems to rigorous aerospace standards. You will be a technical leader on a team eager to learn and grow.
Responsibilities
Full ownership of the design, build, and maintenance of mechanical or electrical test stands for development testing, production acceptance testing, functional and environmental qualification testing
Automate the repetitive aspects of the test stands
Author, execute, and audit test plans, procedures, and reports
Work closely with design engineers and flight test engineers to design, build, test and improve flight hardware
Help the team grow and provide mentorship to peers
Basic Success Criteria
B.S. Degree in Mechanical, Electrical, Aerospace, Computer Science, Software Engineering or equivalent industry experience
5+ years of industry experience testing hardware in a regulated industry
Professional knowledge of ECAD tools such as Altium OR MCAD tools such as NX
Experience with software design and implementation in Python or C/C++
Strong understanding of mechanical or electrical engineering fundamentals
Eagerness for hands-on work - integration of sensors, building test fixtures, diagnosing and debugging equipment and hardware
Proven ability to methodically diagnose, document, and solve hardware problems
A demonstrated passion for mechanical, electrical, or electromechanical hardware
Preferred Criteria
8+ years experience in aerospace test planning and execution
A history working on and around aircraft
Prior experience with aerospace qualification testing standards (MIL-STD-810, RTCA DO-160, or similar) and the aircraft certification process
Comfort reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation
Mastery of test instrumentation and data collection methods; ability to design a data acquisition system from the ground up
Working understanding of measurement and data analysis; ability to clearly present technical data and state its limitations
Demonstrated proficiency building/fabricating machine parts, cable assemblies, or other testing, integration, or assembly experience
Eagerness to learn, teach, and adapt; help us grow as both a development and production operation
As a member of our team, you will be a pivotal contributor to the development of novel hardware that will transform the future of flight. From component level thermal testing to instrumenting our aircraft with a sensor suite for flight testing, you will closely interface with many vital parts of our system. The cross-functional nature of this role also lends itself to mentoring opportunities across the entire company.
This role is located onsite at our HQ in Mountain View, CA.
Must be willing to travel 10% of the time.
The estimated salary range for this position is $180,000 to $260,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $180K - $260K
Apply for this Job