Solid Surface Reviews Jobs in Usa

Ride Operators ensure our guests have a fun and safe experience on our wide-variety of Rides.

• Attend required Human Resources Discovery, Rides Department training, and specific ride training.
• Adhere to Six Flags Standards of Appearance and Attendance policy as stated in the Six Flags Handbook.
• Provide courteous greetings and answer any Guest questions. Respond to and resolve Guest comments whenever possible.
• Ensure Guest safety and satisfaction during their visit.
• Enforce all rider restrictions including monitoring and measuring for height requirements.
• Assist with pairing up of single riders and proper grouping techniques to ensure greater capacity.
• Take hourly throughput readings.
• Respond to any emergency situation in the area and maintain control until a Supervisor arrives.
• Monitor and enforce Park line jumping and smoking policies.
• Clean ride units and ride areas as needed, including Guest Illnesses.
• Assist with downtime situations and evacuation, if a ride cannot be restarted.
• Be able to communicate proper hand signals as called for during ride operation.
• Watch ride and waiting Guests during the ride cycle.
• Physically check restraints.
• Assist Guests as they exit the ride.
• Manually open restraints when necessary.
• Operate the secondary control panel and visually monitor ride during operation and be prepared to stop the ride during critical situations.
• Validates Fast Lane wristbands at assigned rides and manage merge points to ensure guests are loaded onto the ride in a safe and timely manner.
• Successfully complete the International Ride Operator Certification (iROC) course through General Rides Training.
• Complete ride certification tests, corrected to 100% proficiency.
• Complete Witness Statements as needed.
• Stand at the control panel of the ride and run the ride by pressing appropriate buttons, visually monitoring control panel for flashing lights/solid lights, and be prepared to stop the ride during critical situations.
• Give announcements via a public address system when necessary.
• When assigned by a Rides Unit or Section Supervisor - perform test rides to ensure continued safety.
• Report any unsafe acts to your Unit or Section Supervisor
• Maintaining all aspects of ride area cleanliness by lining all trash cans with bags, emptying when full, wiping and re-bagging trash cans and carrying a pan and broom to sweep leaves, trash and debris

• Minimum Age: 16
• Must have flexible availability including weekends, weeknights, and holidays
• Able to work efficiently in a fast-paced environment
• Able to communicate effectively in the English language, including the ability to read, speak and understand the English language.
• Must be able to stand/walk for up to 5 hours at a time and as many as 16 hours a day.
• Must be able to walk up to 5 miles per day over various surfaces.
• Capable of holding a handheld scanner (Approximate weight is 2.5 pounds), with both hands, for a minimum of 6 continuous hours.
• May be exposed to: heights, spinning objects or moving water.
• Must be willing to work outdoors in various weather conditions
• Must be professional, self-motivated, the ability to multi-task and have an enthusiastic attitude
• Must have strong teamwork skills and the ability to work with others

We are currently seeking part-time General Manufacturing employees to grow with us! A general manufacturing position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment.

 
Shift Schedule: Days/Nights minimum of 8-hours and max of 12-hours 7am-7pm and 7pm-7am

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The ability to take stacks (average 10-30 lbs) using repetitive hand/wrist movement, off of the end of a machine (2-4 feet high) and stack product on skids from floor level to 5 feet high using repetitive bending and twisting.
• The ability to remove skids (weighing up to 2400 lbs) by using a Big Joe and Hand Truck
• Ability to lift stacks of end boards (30 lbs) as needed
• Lift rolls of banding strap (60 lbs) as needed
• Moving logs as needed without lifting them (stand them up or lie them down)
• Ability to adjust stacker using a touch screen
• Ability to use a vibrating jogging table
• The ability to take stacks of loose signatures ranging (5-30 lbs) off a pallet of up to 48” in height and transfer to table top work surface 42”, and then place into a collator hopper.
• Ability to transfer completed bundles of product (10-30 lbs) off machine conveyor and stack onto pallets or into mail bags that potentially weigh from 5 to 75 lbs. Then place mail bags onto pallet.
• The ability to use a hand jack or motorized Raymond or Big Joe lift.
• The ability to use a computer, scissors, and tape gun.
• At least 18-years of age or older
• A solid work history
• Ability to work well in a team environment 
• Ability to follow instructions and work independently
• The ability to read and write; possess good verbal and written comprehension
• The flexibility to work including days, nights, weekends, overtime, and holidays

Education and /or Experience

• Manufacturing experience is preferred, such as laborer or machinist

We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.

Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.

Drug-Free Workplace

We are currently seeking part-time General Manufacturing employees to grow with us! A general manufacturing position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment.

 
Shift Schedule: Days/Nights minimum of 8-hours and max of 12-hours 7am-7pm and 7pm-7am

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The ability to take stacks (average 10-30 lbs) using repetitive hand/wrist movement, off of the end of a machine (2-4 feet high) and stack product on skids from floor level to 5 feet high using repetitive bending and twisting.
• The ability to remove skids (weighing up to 2400 lbs) by using a Big Joe and Hand Truck
• Ability to lift stacks of end boards (30 lbs) as needed
• Lift rolls of banding strap (60 lbs) as needed
• Moving logs as needed without lifting them (stand them up or lie them down)
• Ability to adjust stacker using a touch screen
• Ability to use a vibrating jogging table
• The ability to take stacks of loose signatures ranging (5-30 lbs) off a pallet of up to 48” in height and transfer to table top work surface 42”, and then place into a collator hopper.
• Ability to transfer completed bundles of product (10-30 lbs) off machine conveyor and stack onto pallets or into mail bags that potentially weigh from 5 to 75 lbs. Then place mail bags onto pallet.
• The ability to use a hand jack or motorized Raymond or Big Joe lift.
• The ability to use a computer, scissors, and tape gun.
• At least 18-years of age or older
• A solid work history
• Ability to work well in a team environment 
• Ability to follow instructions and work independently
• The ability to read and write; possess good verbal and written comprehension
• The flexibility to work including days, nights, weekends, overtime, and holidays

Education and /or Experience

• Manufacturing experience is preferred, such as laborer or machinist

We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.

Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.

Drug-Free Workplace

At Jabil (NYSE: JBL), we are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, supply chain, and manufacturing solutions. With 60 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.

How Will You Make An Impact?

The Culture and Engagement Specialist is responsible for advancing organizational health, employee engagement, and inclusive culture across U.S. manufacturing sites. This role serves as a subject‑matter expert and strategic partner to U.S. HR Operations, Site HR teams, and Operations leadership, translating enterprise engagement strategy into actionable, site‑level initiatives that drive measurable results.

Location:

This role will be based on-site at our St. Petersburg, FL Corporate Headquarters. Traveling to various manufacturing sites will be required, as needed (Roughly 20% or so, depending on business needs and projects).

What Will You Do?

• Serve as a strategic partner to Site HR teams, collaborating closely with the U.S. HR Operations team to align enterprise priorities with site-specific needs.
• Partner with Site HR and L&E team to assess and interpret organizational health across U.S. sites, leveraging qualitative and quantitative insights (e.g., Employee Opinion Survey results, turnover trends, pulse checks) to inform action.
• Collaborate with Site HR and Operations leaders to co-design and implement high-impact engagement strategies tailored to the unique culture, workforce, and business needs of each site.
• Enable Site HR through a consistent, flexible framework for engagement programs, recognition, and cultural initiatives that support local execution while aligning to broader business priorities.
• Act as a thought partner to Site HR on employee engagement by identifying key motivators, emerging themes, and opportunities to strengthen the employee experience.
• Share best practices and insights across sites, supporting Site HR in adopting approaches that drive consistency while respecting local context and maturity.
• Partner with Site HR to lead post-survey action planning, supporting analysis, prioritization, communications, and follow-through to strengthen accountability and cultural improvement.
• Support and augment Site HR efforts on broader HR initiatives as needed, providing expertise, tools, and capacity to ensure successful execution.
• Advise and support Site HR on communication and change management related to leadership transitions, organizational design changes, and enterprise initiatives.
• Coach and guide team member(s) responsible for regional communications, logistics, and program documentation to ensure strong support for Site HR and business partners.
• Build trusted relationships with Site HR and business leaders, acting as a collaborative advisor to ensure timely, relevant, and value-added delivery of HR programs.
• Escalate themes, risks, and systemic concerns surfaced through partnership with Site HR to the U.S. HR Operations team to support visibility and resolution.
• Partner with Site HR to monitor key HR indicators across U.S. sites, identifying trends and recommending proactive or corrective actions when needed.
• Perform other duties and responsibilities as assigned in support of Site HR and enterprise HR objectives.

How Will You Get Here?

Education:

• Bachelor’s degree in Human Resources or related field preferred.

Experience:

• At least 3-5+ years of experience in HR/culture & engagement roles in manufacturing (or similar) fast-paced environments.
• Or an equivalent combination of education, experience, and/or training.

Knowledge, Skills, Abilities:

• Demonstrated ability to collaborate effectively across functions with stakeholders at various levels.
• Hands-on experience supporting and executing engagement initiatives, surveys, and culture-related programs.
• Strong written and verbal communication skills, with the ability to clearly convey ideas and facilitate discussions when needed.
• Solid data analysis and storytelling skills to translate insights into actionable recommendations.
• Proven ability to support, refine, and continuously improve HR policies, processes, and systems.
• Experience working within HR in a large, multi‑national manufacturing or services environment.
• A seasoned HR professional with deep functional expertise and attention to detail.
• A proactive, solutions‑oriented mindset with a genuine interest in supporting a positive workplace culture.
• Comfortable working in diverse, fast‑paced environments and aligning with established priorities and standards.
• Good command of English (read, write, and speak).
• Proficient in personal computers and Microsoft Office tools (Excel, Word, PowerPoint) with strong email communication skills.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
• 401K Match
• Employee Stock Purchase Plan
• Paid Time Off
• Tuition Reimbursement
• Life, AD&D, and Disability Insurance
• Commuter Benefits
• Employee Assistance Program
• Pet Insurance
• Adoption Assistance
• Annual Merit Increases
• Community Volunteer Opportunities

Overview

has been leading the way in a booming healthcare industry since 1995. Locum Tenens is a Latin phrase meaning, “to substitute for.” When hospitals are understaffed, they rely on us to find them the right temporary physicians to fill in when needed. Every associate at plays a role in getting patients seen, no matter what they studied in school or what their role is here. Located in Alpharetta, GA, we boast a state-of-the-art campus featuring world-class amenities. There’s nothing ordinary about a typical day here, take a look for yourself: are a Jackson Healthcare company and we are now the second largest healthcare staffing company in the U.S., serving more than 7 million patients in over 1,400 healthcare facilities.

The Senior Manager, Change Management will partner closely with the Project Management Office (PMO), senior leaders, and cross-functional teams to strategically plan and drive adoption of large, enterprise-wide transformation initiatives at . This role ensures that corporate projects are implemented with discipline, clarity, and consistency by translating strategy and project delivery into sustained behavioral and operational change. Sitting at the intersection of strategy, PMO execution, and organizational effectiveness, the Senior Manager, Change Management, will design and execute change strategies aligned to the corporate project portfolio, proactively manage change saturation and risk, and enable leaders to effectively sponsor and reinforce change. This role balances hands-on change leadership for high-impact initiatives with portfolio-level oversight to protect adoption, accelerate value realization, and minimize disruption across the organization.

ESSENTIAL FUNCTIONS AND BASIC DUTIES:

Change Strategy, Adoption & Readiness - 45%

• Designs and executes comprehensive change strategies, including stakeholder impact analysis, readiness assessments, communication, training, and resistance-management plans
• Partners with functional leaders to redesign processes that support new technology and ways of working; identifies process changes required to deliver successful adoption
• Leads hands-on change execution for high-impact transformation initiatives while coaching project teams and / or leaders to build internal change capability
• Manages Change Communication:
• Designs and executes multi-channel communication strategies that build awareness, understanding, and enthusiasm for change across all levels of the organization
• Develops clear, compelling messaging tailored to diverse audiences that connects change to business value and individual impact
• Creates and maintains communication calendars, ensuring consistent cadence and messaging across initiatives
• Supports Learning Pathways Related to Change:
• Assesses skill and knowledge gaps created by new technologies, tools, and processes, and design learning strategies to close them.
• Partners with subject matter experts to create training content, job aids, quick-reference guides, and other enablement materials
• Oversees Change Activities:
• Leads change networks, champion programs, and feedback loops that create grassroots momentum and surface real-time adoption challenges
• Facilitates workshops, focus groups, and stakeholder sessions to gather input, co-create solutions, and build ownership of change
• Ensures change activities are appropriately scaled and tailored to the initiative’s scope, risk, and organizational impact

Enterprise Change & Project Management Office (PMO) Partnership – 40%

• Partners with the PMO to embed change management into the full project lifecycle, from intake and planning through delivery, adoption, and benefits realization
• Leads change strategy development for large corporate and enterprise initiatives, ensuring alignment with business objectives, project plans, and executive expectations
• Builds change roadmaps that sequence and prioritize across a portfolio of concurrent initiatives, managing dependencies and competing demands on the organization's capacity for change
• Develops and maintains enterprise-level change reporting (e.g., readiness, adoption, risks, milestones) aligned with PMO status and steering committee updates
• Advises project sponsors and project managers on change implications, tradeoffs, and mitigation strategies to improve delivery outcomes.

Leadership Enablement & Capability Building – 15%

• Coaches executives, sponsors, and people leaders to effectively fulfill their roles as visible change champions.
• Builds and evolves LT’s change management standards, tools, and best practices in partnership with Human Capital
• Mentors project managers and embedded change resources to strengthen organizational change maturity over time

SECONDARY FUNCTIONS (IF APPLICABLE)

• May work on special projects or other duties as assigned

SUPERVISORY/BUDGETARY/EXTERNAL COMMUNICATION RESPONSIBILITY

• Aware of budget, helps manage expenses

QUALIFICATIONS – EDUCATION, WORK EXPERIENCE, CERTIFICATIONS

• Bachelor’s degree in business, organizational development, communications or a related field required
• 5+ years of experience leading change management for large, complex initiatives, preferably within a Project Management Office (PMO), transformation office, or consulting environment
• Experience supporting enterprise or corporate project portfolios required

KNOWLEDGE, SKILLS, AND ABILITIES

• Ability to adhere to and exhibit the Company Values at all times
• Working knowledge of Microsoft Word, Excel, PowerPoint, Outlook, and Teams
• Working knowledge of Salesforce or relative CRM systems
• Working knowledge of document management systems
• Ability to effectively manage multiple competing priorities in a fast-paced environment
• Excellent communication skills - both oral and written
• Ability to build strong business relationships at all levels
• Strong interpersonal skills
• Strong attention to detail
• Strong organizational and time management skills
• Ability to work independently and collaboratively
• Solid critical thinking and creative problem-solving skills
• Ability to consistently meet goals, commitments, and deadlines
• Ability to work with sensitive information and maintain confidentiality

KEY COMPETENCIES REQUIRED

• Communicates Effectively
• Innovative
• Customer Focus & Teamwork
• Quality & Results-Oriented
• Decision Making
• Resourceful & Tenacious
• Develops Self
• Technical Skills

PHYSICAL, MENTAL, WORKING CONDITION, AND TRAVEL REQUIREMENTS

• Typical office environment - sedentary with typing, writing, reading requirements. May be able to sit or stand.
• Speaking, reading, writing, ability to use a telephone and computer
• Ability to exert up to 10 lbs. of force occasionally
• Ability to interpret various instructions
• Ability to deal with a variety of variables under only limited standardization
• No travel required

What is in it for you

Company-paid benefits (Basic Life and AD&D, Short and Long-Term Disability, Employee Assistance Program, Compass Health Advocate and Transitions).

Healthcare benefit options (Value Plan, High Deductible Plan with HSA, Healthcare FSA, Dependent Care FSA, Prepaid Legal Services, 529 Savings Plan, Pet Insurance).

Paid parental leave.

Position Summary

The Factoring Operations Specialist is responsible for executing accurate, timely back-office processing across payroll, invoicing, funding packets, cash application, and reconciliations that support the delivery of high-quality client service. This role ensures the integrity of financial processing, meets banking deadlines, and partners closely with Portfolio/Relationship Managers to resolve exceptions and maintain a stable factoring portfolio.

Key Responsibilities

Funding & Reconciliation

* Prepare and reconcile weekly funding reports including invoices purchased, accounts receivable activity, and reserve analyses.

* Ensure all reconciliations are accurate, auditable, and completed within required timelines.

Data Preparation & Imports

* Build and validate Excel/CSV files for import.

* Perform accurate data entry for invoices purchased, maintaining consistency across systems.

Cash Movement & Reporting

* Execute wires and ACH transactions in coordination with banking deadlines.

* Generate A/R aging and subsidiary reports; balance payroll and invoicing to accounting statements.

Exception Processing

* Support Relationship Managers by researching and processing exception items.

* Surface discrepancies, partner cross-functionally to resolve them, and document outcomes.

Quality, Compliance & Timeliness

* Meet all daily, weekly, and banking-related processing deadlines.

* Maintain complete, audit-ready records and adhere to internal policies and procedures.

* Identify opportunities for process improvement and workflow efficiency.

Qualifications

Required

* Associate's degree in Accounting or equivalent experience.

* Strong Excel skills and proficiency working across multiple datasets and systems.

* Solid understanding of payroll taxes, accounts payable, accounts receivable, and/or cash posting.

* Highly detail-oriented, organized, and effective at managing deadlines in a fast-paced environment.

* Strong service mindset with the ability to collaborate across teams.

Preferred

* Experience in factoring, payroll processing, or financial operations.

* Familiarity with reconciliation and exception-management workflows.

OVERVIEW: Meridian Manufacturing based in Ballston Spa, NY is seeking a skilled and experienced CNC Machinist to join our team. The ideal candidate will have a minimum of 5 years experience and be proficient in operating various machine tools to produce precision parts and instruments. As a Machinist, you will play a vital role in the manufacturing process, contributing to the production of high-quality components used in diverse industries.

Job Summary:

• 
  
• 
  Machine Operation: Operate and maintain machine tools such as lathes, milling machines, grinders, and CNC machines to produce parts according to specifications.
  
• 
  Blueprint Interpretation: Interpret technical drawings, blueprints, and schematics to understand project requirements and ensure accurate machining.
  
• 
  Setup and Calibration: Set up machines, including loading and adjusting tools, fixtures, and workpieces. Calibrate machines to achieve precise measurements and tolerances.
  
• 
  Material Selection and Inspection: Select appropriate materials for machining based on project requirements. Inspect raw materials and finished parts to ensure they meet quality standards.
  
• 
  Tool Maintenance: Perform routine maintenance on machines and tools to ensure optimal performance and longevity. Sharpen or replace cutting tools as needed.
  
• 
  Quality Control: Conduct quality checks throughout the machining process to verify dimensions, surface finishes, and other specifications.
  
• 
  Safety Compliance: Adhere to safety protocols and procedures to prevent accidents and injuries in the workplace. Maintain a clean and organized work environment.
  
• 
  Collaboration: Collaborate with other team members to optimize production processes and troubleshoot issues as they arise.
  
• 
  Documentation: Maintain accurate documentation for traceability and quality assurance purposes.
  

Qualifications:

• 
  
• Proven experience as a Machinist or in a similar role, preferably in a manufacturing environment.
  
• Proficiency in operating manual and Qualifications CNC machine tools, including lathes, milling machines, grinders, and precision measuring instruments.
  
• Strong blueprint reading skills and the ability to interpret technical drawings and specifications.
  
• Solid understanding of machining techniques, tooling, and materials.
  

• 
  
• Excellent attention to detail and precision in workmanship.
  
• Commitment to safety and compliance with workplace regulations.
  
• High school diploma or equivalent; technical training or certification in machining is preferred.
  

Physical demands: Occasionally lift and/or move up to 40 pounds. Employees is regularly required to stand; use hands and reach with hands and arms.

Schedule: 8-hour shift (day required)

Work Location: In person (Ballston Spa, NY)

Job Summary

Job Description

• Experience Required: Satisfactory completion of job specific skills assessment; 6 to 12 months experience or successful completion of the Giant Eagle Apprenticeship program
• Education Desired: No High School diploma required
• Lifting Requirement: Up to 50 pounds
• Age Requirement: At least 18 years of age

Job Responsibilities

• Fill tables and cases with cakes by taking product from prep area to sales area.
• Follow proper procedures to ensure store meets out-of-stock percentage goals.
• Apply merchandising principles that will help to generate sales as well as WOW the guest.
• Take special orders from guests over the telephone and in person.
• Maintain quality of product for sale by checking sales area for dates and condition of product.
• Document and/or record daily known loss.
• Maintain safety as the top priority in all aspects of our work, for our Team Members, guests, and products.
• Provide exemplary customer service by greeting customers and ensuring they are able to locate the products they are looking for. Bakery Team Members are also expected to have sufficient knowledge to answer questions and make suggestions to our customers.
• Inspire your fellow Team Members and our guests with a passion for food and a willingness to go the Extra Mile to provide the best product.
• Properly handle products and equipment in accordance with food safety and safety guidelines to ensure a safe shopping environment.
• Maintain cleanliness of equipment, tables, utensils, floor, etc. to ensure that safety and sanitation regulations are met.
• Prepare and decorate product for the Bakery cases and displays, rotating product and ensuring code dating procedures are followed and only the freshest product is available for sale.
• Maintain proper safety and sanitation methods, emergency procedures, cleanups, steritech, proper lifting and housekeeping to ensure department standards are met.
• Accurately record special orders on Bakery products to ensure the customer is delighted with the finished product.
• Maintain department procedures, daily setups, order taking, understanding copyright policies and proper product rotation.
• Constantly stay on top of new product knowledge and procedures, such as product information by category, special orders, cake program, portion control, seasonal items and mixing colors.
• Ice and decorate cakes by taking prepared icing and applying to cake using spatulas and icing bags.
• Prepare icing and products for all cakes and other decorated items by reading recipes, measuring ingredients, and mixing product.
• Assist in maintaining Bakery backroom, cooler and freezer efficiency by unloading deliveries.
• Operate department equipment, including mixers, scales, airbrush gun, knives, cut gloves and personal protective equipment (anti-slip shoes).
• Assist in other areas as required.

About Us

Ride Operators ensure our guests have a fun and safe experience on our wide-variety of Rides.

Essential Duties and Responsibilities:

• Attend required Human Resources Discovery, Rides Department training, and specific ride training.
• Adhere to Six Flags Standards of Appearance and Attendance policy as stated in the Six Flags Handbook.
• Provide courteous greetings and answer any Guest questions. Respond to and resolve Guest comments whenever possible.
• Ensure Guest safety and satisfaction during their visit.
• Enforce all rider restrictions including monitoring and measuring for height requirements.
• Assist with pairing up of single riders and proper grouping techniques to ensure greater capacity.
• Take hourly throughput readings.
• Respond to any emergency situation in the area and maintain control until a Supervisor arrives.
• Monitor and enforce Park line jumping and smoking policies.
• Clean ride units and ride areas as needed, including Guest Illnesses.
• Assist with downtime situations and evacuation, if a ride cannot be restarted.
• Be able to communicate proper hand signals as called for during ride operation.
• Watch ride and waiting Guests during the ride cycle.
• Physically check restraints.
• Assist Guests as they exit the ride.
• Manually open restraints when necessary.
• Operate the secondary control panel and visually monitor ride during operation and be prepared to stop the ride during critical situations.
• Validates Fast Lane wristbands at assigned rides and manage merge points to ensure guests are loaded onto the ride in a safe and timely manner.
• Successfully complete the International Ride Operator Certification (iROC) course through General Rides Training.
• Complete ride certification tests, corrected to 100% proficiency.
• Complete Witness Statements as needed.
• Stand at the control panel of the ride and run the ride by pressing appropriate buttons, visually monitoring control panel for flashing lights/solid lights, and be prepared to stop the ride during critical situations.
• Give announcements via a public address system when necessary.
• When assigned by a Rides Unit or Section Supervisor - perform test rides to ensure continued safety.
• Report any unsafe acts to your Unit or Section Supervisor
• Maintaining all aspects of ride area cleanliness by lining all trash cans with bags, emptying when full, wiping and re-bagging trash cans and carrying a pan and broom to sweep leaves, trash and debris

Skills and Qualifications:

• Minimum Age: 16
• Must have flexible availability including weekends, weeknights, and holidays
• Able to work efficiently in a fast-paced environment
• Able to communicate effectively in the English language, including the ability to read, speak and understand the English language.
• Must be able to stand/walk for up to 5 hours at a time and as many as 16 hours a day.
• Must be able to walk up to 5 miles per day over various surfaces.
• Capable of holding a handheld scanner (Approximate weight is 2.5 pounds), with both hands, for a minimum of 6 continuous hours.
• May be exposed to: heights, spinning objects or moving water.
• Must be willing to work outdoors in various weather conditions
• Must be professional, self-motivated, the ability to multi-task and have an enthusiastic attitude
• Must have strong teamwork skills and the ability to work with others

Ride Operators ensure our guests have a fun and safe experience on our wide-variety of Rides.

Essential Duties and Responsibilities:

• Attend required Human Resources Discovery, Rides Department training, and specific ride training.
• Adhere to Six Flags Standards of Appearance and Attendance policy as stated in the Six Flags Handbook.
• Provide courteous greetings and answer any Guest questions. Respond to and resolve Guest comments whenever possible.
• Ensure Guest safety and satisfaction during their visit.
• Enforce all rider restrictions including monitoring and measuring for height requirements.
• Assist with pairing up of single riders and proper grouping techniques to ensure greater capacity.
• Take hourly throughput readings.
• Respond to any emergency situation in the area and maintain control until a Supervisor arrives.
• Monitor and enforce Park line jumping and smoking policies.
• Clean ride units and ride areas as needed, including Guest Illnesses.
• Assist with downtime situations and evacuation, if a ride cannot be restarted.
• Be able to communicate proper hand signals as called for during ride operation.
• Watch ride and waiting Guests during the ride cycle.
• Physically check restraints.
• Assist Guests as they exit the ride.
• Manually open restraints when necessary.
• Operate the secondary control panel and visually monitor ride during operation and be prepared to stop the ride during critical situations.
• Validates Fast Lane wristbands at assigned rides and manage merge points to ensure guests are loaded onto the ride in a safe and timely manner.
• Successfully complete the International Ride Operator Certification (iROC) course through General Rides Training.
• Complete ride certification tests, corrected to 100% proficiency.
• Complete Witness Statements as needed.
• Stand at the control panel of the ride and run the ride by pressing appropriate buttons, visually monitoring control panel for flashing lights/solid lights, and be prepared to stop the ride during critical situations.
• Give announcements via a public address system when necessary.
• When assigned by a Rides Unit or Section Supervisor - perform test rides to ensure continued safety.
• Report any unsafe acts to your Unit or Section Supervisor
• Maintaining all aspects of ride area cleanliness by lining all trash cans with bags, emptying when full, wiping and re-bagging trash cans and carrying a pan and broom to sweep leaves, trash and debris

Skills and Qualifications:

• Minimum Age: 16
• Must have flexible availability including weekends, weeknights, and holidays
• Able to work efficiently in a fast-paced environment
• Able to communicate effectively in the English language, including the ability to read, speak and understand the English language.
• Must be able to stand/walk for up to 5 hours at a time and as many as 16 hours a day.
• Must be able to walk up to 5 miles per day over various surfaces.
• Capable of holding a handheld scanner (Approximate weight is 2.5 pounds), with both hands, for a minimum of 6 continuous hours.
• May be exposed to: heights, spinning objects or moving water.
• Must be willing to work outdoors in various weather conditions
• Must be professional, self-motivated, the ability to multi-task and have an enthusiastic attitude
• Must have strong teamwork skills and the ability to work with others