Snipes Promo Code Reddit Jobs in Usa

Job Summary:

The Electrical Foreman is a skilled leadership position responsible for supervising and coordinating the work of electrical crews on commercial and industrial projects. This role requires advanced knowledge of electrical systems, including strong journeyman-level expertise, and a thorough understanding of the National Electrical Code (NEC). The Electrical Foreman ensures that all installations meet safety standards, project specifications, and quality expectations. Key responsibilities include managing day-to-day field operations, collaborating with project managers, subcontractors, and other trades, and mentoring team members. Success in this role is demonstrated by effective communication, proactive problem-solving, and the ability to manage labor, materials, and schedules to meet project goals.

Essential Duties and Responsibilities

• Leading Teams: Responsible for leading and managing a team of electricians and apprentices by assigning tasks, setting clear expectations, and ensuring all work is completed safely, efficiently, and in accordance with project specifications. Oversees daily crew production and provides constructive feedback and timely performance evaluations.
• Training and Development: Trains new hires and apprentices, while also providing ongoing development opportunities for team members to enhance their skills and job performance.
• Work Planning and Scheduling: Plans and schedules electrical work to meet project deadlines. Coordinates with project managers, other trades, and reviews blueprints and specifications to allocate labor and resources effectively.
• Quality Assurance: Conducts regular inspections of work in progress to ensure compliance with project standards, codes, and regulations. Identifies deficiencies and implements corrective actions to maintain high-quality workmanship.
• Safety Compliance: Enforces all safety policies and procedures. Conducts daily safety meetings and ensures that team members use proper PPE and follow OSHA and company safety guidelines to prevent accidents and injuries.
• Material and Equipment Management: Manages procurement, inventory, and proper use of materials, tools, and equipment. Ensures timely maintenance and repair of equipment as needed to avoid delays.
• Communication and Coordination: Maintains clear and consistent communication with project managers, subcontractors, and clients. Coordinates field activities with other trades to ensure efficient and safe jobsite operations.
• Problem Solving: Troubleshoots on-site issues related to labor, materials, or technical challenges. Implements effective solutions to keep the project on schedule and within scope.
• Documentation and Reporting: Maintains accurate records of job progress, labor hours, safety incidents, and material usage. Prepares and submits required reports to management and project stakeholders.
• Conflict Resolution: Addresses conflicts among crew members, subcontractors, or external partners. Uses strong communication and mediation skills to resolve disputes and foster a collaborative working environment.
• Other: Performs other related duties as assigned.

Knowledge Skills And Abilities:

• Electrical Systems: Comprehensive understanding of electrical systems, including wiring, circuits, transformers, distribution panels, and control systems.
• Electrical Codes and Regulations: Familiarity with national, state, and local electrical codes and regulations governing construction and installation practices to ensure compliance and safety.
• Blueprint Reading: Proficiency in reading and interpreting electrical blueprints, schematics, and technical drawings to plan and execute electrical installations accurately.
• Safety Protocols: Knowledge of occupational health and safety standards and practices, including OSHA regulations, to maintain a safe work environment and prevent accidents and injuries.
• Materials and Equipment: Understanding of electrical materials, tools, and equipment used in construction and maintenance projects, including their specifications, applications, and proper handling procedures.
• Troubleshooting: Ability to identify and troubleshoot electrical problems, diagnose faults, and implement effective solutions to resolve issues efficiently.
• Project Management: Basic project management skills, including planning, scheduling, budgeting, and resource allocation, to coordinate electrical projects effectively and ensure timely completion.
• Excellent verbal and written communication skills.
• Excellent interpersonal and customer service skills.
• Excellent organizational skills and attention to detail.
• Excellent time management skills with a proven ability to meet deadlines.
• Strong analytical and problem-solving skills.
• Strong supervisory and leadership skills.
• Ability to prioritize tasks and to delegate them when appropriate.
• Ability to function well in a high-paced and at times stressful environment.

Education and Experience:

• 3 years of experience managing commercial and industrial construction projects.
• Advanced knowledge of construction and time management
• Advanced knowledge of NEC Electrical Codes
• Ability to read and interpret blueprints, plans and project specifications
• OSHA 10 & OSHA 30 preferred
• NFPA 70E

Physical Demands:

• Prolonged periods of standing.
• Ability to walk several miles daily.
• Ability to climb, crawl, bend.
• Use of power tools
• Ability to dig trenches using with hand tools or equipment
• Must be able to lift up to 75 pounds at times.
• Ability to work in various weather conditions or confined spaces.

Work Environment:

Construction environment including high noise levels, moving vehicles and equipment.

Outdoors and indoors

Climbing ladders, walking and balancing on structural beams

About the Role

S-5! is looking for a Full Stack Web Developer with strong Drupal and Vue.js experience to help build, maintain, and improve our web platforms and internal web applications.

This role is for someone who can work comfortably across the stack, write solid code, and solve real business problems without overcomplicating things. You should be able to move between front-end and back-end work, improve existing systems, and help us build tools and experiences that are reliable, secure, and maintainable.

We’re also looking for someone who can identify practical ways to use AI to improve workflows, speed up execution, and support better decision-making.

Experience with Puppeteer is a plus.

What You’ll Do

• Build and maintain Drupal websites and applications, including custom modules, theming, configuration, and content structure
• Develop front-end features and interfaces using Vue.js
• Connect front-end experiences to Drupal and other backend services through APIs
• Write code that is clean, maintainable, secure, and built for long-term support
• Work with teams across the business to understand requirements and turn them into working solutions
• Participate in code reviews, technical planning, and ongoing improvement of existing systems
• Troubleshoot production issues and fix underlying problems, not just surface-level symptoms
• Improve development workflows, including local setup, testing, deployment, and CI/CD
• Create and maintain Puppeteer scripts for browser automation and end-to-end testing when needed
• Look for practical opportunities to use AI and automation to improve internal workflows and execution

Required Qualifications

• 5+ years of professional web development experience, or equivalent depth of experience
• Strong hands-on experience with Drupal, ideally Drupal 9 or 10
• Experience with custom module development, configuration management, and content modeling
• Familiarity with Composer-based Drupal workflows
• Experience with Drupal theming and Twig templates
• Strong hands-on experience with Vue.js, including component-based development, API integration, routing, and build tooling
• Strong fundamentals in modern JavaScript, HTML, CSS, and responsive UI development
• Comfortable working in PHP and with relational databases such as MySQL or MariaDB
• Experience building or consuming REST APIs and connecting front-end applications to backend systems
• Proficiency with Git and standard team development practices such as pull requests and code reviews

Preferred Qualifications

• Experience with Puppeteer and Node.js for browser automation or end-to-end testing
• Experience with TypeScript
• Familiarity with automated testing tools such as Jest, Cypress, Playwright, or PHPUnit
• Experience with Docker, DDEV, Lando, or similar local development tools
• Understanding of accessibility best practices and web performance optimization
• Familiarity with secure coding practices and dependency management

This role is fully in office at our corporate headquarters in Colorado Springs, CO. 

Compensation and Benefits:

Base salary: $90,000–$100,000, depending on experience

Target performance bonus: 10%

Standard benefits package; details will be provided by HR

Please submit your resume, along with links to relevant work such as GitHub or a portfolio, if available. Include a brief note highlighting your experience with Drupal, Vue.js, and .

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $34.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 11:30 am – 8:00 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Mobile MT3” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in related field preferred
  
  
• Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team
  
  
• Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Other Service Island support - SBTIII trained - SBT220 within 180 Days
  
  
• Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year
  
  
• Other Tire & Wheel safety - TW220 within 90 Days
  
  
• Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air qualified - (BA220&BA298) within 90 Days
  
  
• Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25)
  
  
• Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days
  
  
• Other A/C recycling/recovery certified - CF609 within 90 Days
  
  
• Other A/C qualified - (AC220&AC298) within 180 Days
  
  
• Other HD electrical trained - DR208 within 90 Days
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Act as a mentor for the Mobile Technician II level
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 5 days ago (3/16/2026 5:33 PM)

Requisition ID 2

Location (Posting Location) : State/Province AL

Location (Posting Location) : City MOBILE

Location (Posting Location) : Postal Code 36618

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000127

Min Pay USD $32.00/Hr.

Max Pay USD $32.00/Hr.

Position Description

Torque by Ryder is immediately hiring a Permanent Full-Time Experienced Mobile Diesel Technician to support our Truck Fleet in Raleigh, North Carolina

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $36.00 per hour based on experience
  
  
• Retention Bonus: $2000 paid every quarter within the first year.
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominiqueor text “Raleigh Mobile” to 9 to speak with your recruiter today.

At Ryder, we offer outstanding benefits:

• 
  
• Generous Paid Time Off
  
  
• Medical, Dental and Vision Insurance effective 30 days from hire date
  
  
• Life Insurance and Disability Insurance Options
  
  
• 401K Savings Plan with Ryder matching contributions
  
  
• Discount on purchase of Ryder Common Stock
  
  
• Employee Discounts on Automotive, Mobile plans, Travel and Hotels
  
  
• Accredited Tech School Tuition Reimbursement
  
  
• PPE & Uniforms provided at no cost
  
  
• Paid Job training and development
  
  
• Employee & Customer Referral Bonus program
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 4 days ago (3/17/2026 4:39 PM)

Requisition ID 2

Location (Posting Location) : State/Province NC

Location (Posting Location) : City RALEIGH

Location (Posting Location) : Postal Code 27616

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $36.00/Hr.

Max Pay USD $36.00/Hr.

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience

Are you looking for a place to deliver excellent care patients deserve? At HCA Houston Healthcare Southeast we support our colleagues in their positions. Join our Team as a(an) Registered Nurse Rapid Response Team and access programs to assist with every stage of your career.

HCA Houston Healthcare Southeast, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:

• Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.
• Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.
• Free counseling services and resources for emotional, physical and financial wellbeing
  
• 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)
  
• Employee Stock Purchase Plan with 10% off HCA Healthcare stock
  
• Family support through fertility and family building benefits with Progyny and adoption assistance.
  
• Referral services for child, elder and pet care, home and auto repair, event planning and more
  
• Consumer discounts through Abenity and Consumer Discounts
  
• Retirement readiness, rollover assistance services and preferred banking partnerships
  
• Education assistance (tuition, student loan, certification support, dependent scholarships)
  
• Colleague recognition program
  
• Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)
  
• Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.

Learn more about Employee Benefits

Note: Eligibility for benefits may vary by location.

Are you a continuous learner? With more than 94,000 nurses throughout HCA Healthcare, we are one of the largest employers of nurses in the United States. Education is key to excellence! As a majority owner of Galen College of Nursing, which joins Research College of Nursing and Mercy School of Nursing as educational facilities within the HCA Healthcare family, we make it easier and more affordable to gain certifications and job skills. Apply today for our Registered Nurse Rapid Response Team opening and continue to learn!

Job Summary:

We are seeking a Registered Nurse (RN) Rapid Response for our facility to ensure that we continue to provide all patients with high quality, efficient care. We are an amazing team that works hard to support each other and we are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply now!

What You Will Do In Your Role:

•  You will be responsible to respond for all RRTs (Rapid Response calls), Code Blue, Code Sepsis, and Code Stroke.
•  You will communicate daily with each charge nurse to identify high risk patients.
•  You will be responsible to monitor surgery schedule and rounds on any “at risk” post op patients.
•  You will take on the role of educator and provides support and education to staff as needed.

What qualifications you will need:

•  Graduate of an accredited school of professional nursing is required.
•  Current Registered Nurse License in the State of Texas or Multi-State Compact License (Employees with RN Compact License are required to obtain Texas RN License within 90 days of hire date)
•  Minimum of 2 years nursing experience in Intensive Care or Emergency Department.
•  Current American Heart Association BLS Certification is required
•  Current American Heart Association ACLS Certification is required
•  NIH Stroke Scale Certification required
• Advanced Cardiac Life Spt
• Emergency Nurse Pediatric Course
• PALS Pediatric Adv Life Supt
• Trauma Nursing Core Course
• Associate Degree Required, BSN Preferred 

HCA Houston Healthcare Southeastis a full-service340+ bed acute care hospital in Pasadena, Texas. We have been a leader of medical care in Pasadena for more than 50 years. With board-certified physicians, registered nurses and expert technicians, the community has come to rely on us for top-quality, comprehensive and compassionate healthcare. HCA Houston Southeast is theonly hospital in Pasadena with both Chest Pain Center Accreditation with Primary PCI and Resuscitation by the American College of Cardiologyand full accreditation by The Joint Commission on the Accreditation of Healthcare Organizations. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home.

HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses.

If growth and continued learning is important to you, we encourage you to apply for our Registered Nurse Rapid Response Team opening. Our team will promptly review your application. Highly qualified candidates will be contacted for interviews.Unlock the possibilities apply today!

We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.
• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
• Operate, use and maintain overhead maintenance work platforms
• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
• Inspect and maintain building runway rails and expansion joints.
• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
• Maintain logs, charts, and perform written and verbal tie-in records.
• Prepare reports and schedules as required.
• Work with and assist employees of other classifications as required.
• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.
• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Summary:

This position is responsible for facilitating improvement in the overall quality and completeness of the medical record documentation. The clinical documentation RN will provide support and expertise through comprehensive assessment and review of inpatient medical records. The clinical documentation RN will facilitate accurate DRG assignment and obtain appropriate documentation through extensive interaction with physicians, patient caregivers and health information management coding staff to ensure that reimbursement is received for the level of services rendered to the patients.

Responsibilities:

• Analyzes clinical status of patient, current treatment plan and past medical history and identifies potential gaps in physician documentation
• Communicates with attending physician either verbally or through written methodology to validate observations and suggest additional and/or more specific documentation
• Maintains positive open communication with physicians, nursing and all other disciplines involved in the care of the patient
• Works closely with HIM Coding staff to assure documentation of discharge diagnosis and any co-existing co-morbidities are a complete reflection of the patient's clinical status and care
• Maintains an electronic DRG worksheet to assist coders on identifying all documented diagnosis and procedures
• Updates DRG worksheet to reflect any changes inpatient status/procedure/treatment and confers with the physician to finalize diagnosis
• Consistently meets established productivity targets for record review
• Designs and implements in collaboration with physician leadership specific tools to support medical record physician documentation
• Develops and implements plans for both formal and informal education of physician, nursing, and other clinical staff on clinical documentation opportunities, coding and reimbursement as well as performance improvement methodologies
• Assists in collection and organization of data for analysis by appropriate medical and hospital committees
• Identifies strategies for sustained work process changes that facilitate complete, accurate clinical documentation
• Demonstrates competence to perform assigned responsibilities is a manner that meets the population-specific and developmental needs of the members served by the department
• Appropriately adapts assigned assessment, treatment, and/or service methods to accommodate the unique physical, psychosocial, cultural, age-specific and other developmental needs of each member served
• Takes personal responsibility to ensure compliance with all policies, procedures and standards as promulgated by state and federal agencies, the hospital, and other regulatory entities
• Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties
• Performs other duties as assigned

Requirements:

• Associate's Degree in Nursing
• RN License in state of employment or compact

Work Schedule:

8AM - 5PM Monday-Friday

Work Type:

Full Time

ABOUT CAMPBELL COUNTY HEALTH

Campbell County Health (CCH) is more than just a hospital—we are a comprehensive healthcare system serving northeast Wyoming. Our organization includes Campbell County Memorial Hospital, a 90-bed acute care community hospital in Gillette; Campbell County Medical Group, featuring nearly 20 specialty and primary care clinics—including locations in Wright and Hulett; and The Legacy Living & Rehabilitation Center, a long-term care facility. 

To be responsive to our employee’s needs we offer:

• 
  
• Generous PTO accrual (increases with tenure)
  
• Paid sick leave days
  
• Medical/Dental/Vision
  
• Health Savings Account, Flexible Spending Account, Dependent Care Savings Account
  
• 403(b) with employer match
  
• Early Childhood Center, discounted on-site childcare
  
• And more! Click here to learn more about our full benefits package
  

JOB SUMMARY

The Office Coordinator performs all duties required to support and coordinate functions efficiently to meet and/or exceed customer expectations. Responsible for compiling patient’s medical record, coordinating patient’s tests and procedures with multiple internal and external sources. Completes patient order entry and maintains par level of patient and departmental supplies, and is an instrumental resource of patient information to physicians and staff.

ESSENTIAL FUNCTIONS

• 
  
• Promptly acknowledges a patient upon their arrival to the department.  Quickly and efficiently addresses the patients’ needs.  Knows and relays information to the patient i.e. wait times, special instructions, etc.
  
• Maintains confidential patient records and physician orders via computer and paper.
  
• Communicates daily via telephone, fax, email to physicians, referring physicians, offices, and patients to ensure patient satisfaction.
  
• Enters physician orders into the HIS accurately for all imaging modalities.     
  
• Demonstrates proficient computer skills in HIS, RIS, email, MS Word, MS Excel.
  
• Scans physician orders in the appropriate account in the HIS.
  
• Escort patients to the appropriate waiting area for their exam.
  
• Performs daily reminder calls to the patients.  This includes specific exam information and preparation instructions.
  
• Coordinates imaging and procedures, ensuring accurate preps, diets, medications, and supplies, etc., are communicated to the patient and/or provider’s office. Prioritizes the scheduling of multiple tests and procedures.
  
• Schedules in HIS for all radiology modalities, follows the protocol for such scheduling, obtains proper paperwork, and required signatures in accordance of quality standards and to maintain accuracy.
  
• Accurately enters orders in HIS and reason for exam for appropriateness.  Determines the correct patient account when placing imaging orders.
  
• Accurately utilizes RIS (Radiology Information System) to arrive patients and obtain patient information.
  
• Encourages cost savings for the department and organization.
  
• Provides excellent customer service, demonstrates professionalism and courteous telephone etiquette.
  
• Demonstrates flexibility, positive interpersonal relations in high volume, high traffic, and fast paced work environment.
  
• Demonstrates good positive communication skills with patients, families, medical staff and co-workers.
  
• Communicates closely with interdepartmental staff to coordinate schedules and obtain proper paperwork and previous diagnostic imaging when necessary.
  
• Complies with the hospital’s Corporate Compliance Program including, but not limited to, the Code of Conduct, laws and regulations, and hospital policies and procedures.
  
• Must be free from governmental sanctions involving health care and/or financial practices.
  
• Performs other duties as assigned.
  
• Review of patient records for information needed for procedures (i.e. labs, previous exams etc.)
  
• Shows initiative. Tasks are completed before the end of shift and aids in preparation for the next day. Uses time wisely.  Able to multi-task, prioritize work, and complete it in a timely manner.
  
• Knowledge of medical terminology and familiarity with medical diagnostic procedures.
  
• Knowledge of current health care billing practices and authorization requirements.
  
• Confirms insurance information with the patient or provider’s office for authorization purposes.
  
• Coordinates scheduling of patient exams with CCH authorization staff to limit wait times for patients and ensure adequate authorization from patient insurance.
  
• Familiarity with CPT codes for imaging procedures.
  
• Familiarity with ICD-10 codes.
  
• Verifies Medical Necessity when scheduling and entering orders.  Communicates to provider offices regarding absence of medical necessity, or medical necessity fails.
  
• Coordinates complex imaging requests and/or procedures with other departments in the hospital.
  
• Coordinate and participate in activities relating to the retrieval of prior patient imaging, importing CD’s into PACS per protocol.
  
• Participates in the Appropriate Use Criteria for Advanced Diagnostic Imaging program following CMS guidelines.  Assists physician offices with AUC resources and website information for CPT code accuracy.
  

JOB QUALIFICATIONS

• 
  
• Education
  
  
  • 
    
  • High school graduate or GED
    
  
  
  
• Licensure
  
  • 
    
  • None
    
  
  
  
• Certifications required
  
  • 
    
  • See Cardiopulmonary Resuscitation Certification Policy and Certifications/Education Requirements Policy.
    
  
  
  
• Experience
  
  • 
    
  • Previous clerical or unit secretary experience preferred.
    
  • Courses in medical terminology or unit secretary training program preferred
    
  
  
  

PI596c81abff6d-3631