Sifter Machine Uses Jobs in Usa

Duration: Permanent/Full-time

Client: One of the largest Diesel Engines and Power Generators manufacturers in the US

Overview:

We are looking for an Industrial Machine Repair Technician III who troubleshoots, assembles, installs, tests and maintains mechanical systems using all necessary tools to keep equipment available and capable. Learns and understands the protocols of working safely with electricity and other energy sources with industrial equipment. May work independently and instruct or coach others.

Duties:

• Strengthen equipment reliability by expertly troubleshooting, assembling, installing, and maintaining mechanical systems to keep production running smoothly.
• Elevate workplace safety by proactively identifying hazards, stopping unsafe work, and modeling strict adherence to HSE protocols and PPE requirements.
• Improve environmental stewardship by recognizing how daily tasks affect the environment and consistently acting to reduce negative impact.
• Enhance product quality through meticulous craftsmanship, precise use of technical documentation, and thorough inspections that prevent defects and reduce cost exposure.
• Boost operational performance by executing preventive, corrective, emergency, and predictive maintenance that minimizes downtime and supports production goals.
• Develop team capability by coaching less experienced technicians, sharing knowledge, and serving as a trusted resource for troubleshooting and best practices.
• Drive process improvement by identifying constraints, solving recurring problems, and contributing to continuous improvement and TPM initiatives.
• Strengthen team cohesion by communicating clearly, collaborating across support groups, and actively engaging in training and personal development to support collective success.

Qualifications:

• At least 7 years of experience in a relevant trade field, or A Journeyman Trade Certificate with relevant experience, or A 2-year technical degree in a related field, plus 3 years’ experience working in the Machine Repair/Industrial Electrical field.
• Knowledge of mechanical systems including hydraulics, pneumatics, conveyance systems, CNC equipment, and automation required.
• Responsible for completing machine layouts and machine installations.
• Relevant Experience may include: Controls Engineering, Industrial Automation, Robotics, Residential or Commercial Electrical, Heavy Duty Equipment Maintenance, Welding and Fabrication, Machining, and Farming and Agricultural work, specifically maintenance and repair of equipment etc.

AI Research Scientist | Machine Learning | Deep Learning | Natural Language Processing | LLM | Hybrid | San Jose, CA

Title: AI Research Scientist

Location: San Jose, CA

Responsibilities:

• Design, execute, and analyze machine learning experiments, establishing strong baselines and selecting appropriate evaluation metrics.
• Stay up to date with the latest AI research; identify, adapt, and validate novel techniques for company-specific use cases.
• Define rigorous evaluation protocols, including offline metrics, user studies, and adversarial (red team) testing to ensure statistical soundness.
• Specify data and annotation requirements; develop annotation guidelines and oversee quality control processes.
• Collaborate closely with domain experts, product managers, and engineering teams to refine problem statements and operational constraints.
• Develop reusable research assets such as datasets, modular code components, evaluation suites, and comprehensive documentation.
• Work alongside ML Engineers to optimize training and inference pipelines, ensuring seamless integration into production systems.
• Contribute to academic publications and represent the company in research communities, as needed.

Educational Qualifications:

• Ph.D. in Computer Science, Artificial Intelligence, Machine Learning, or a related field is strongly preferred.
• Candidates with a master’s degree and exceptional research or industry experience will also be considered.

Industry Experience:

• 3–5 years of experience in AI/ML research roles, ideally in applied or product-focused environments.
• Demonstrated success in delivering research-driven solutions that have been deployed in production.
• Experience collaborating in cross-functional teams across research, engineering, and product.
• Publications in top-tier AI/ML conferences (e.g., NeurIPS, ICML, ACL, CVPR) are a plus.

Technical Skills:

• Strong foundational knowledge in machine learning and deep learning algorithms.
• Hands-on experience with PEFT/LoRA, adapters, fine-tuning techniques, and RLHF/RLAIF (e.g., PPO, DPO, GRPO).
• Ability to read, implement, and adapt state-of-the-art research papers to real-world use cases.
• Proficiency in hypothesis-driven experimentation, ablation studies, and statistically sound evaluations.
• Advanced programming skills in Python (preferred), C++, or Java.
• Experience with deep learning frameworks such as PyTorch, Hugging Face, NumPy, etc.
• Strong mathematical foundations in probability, linear algebra, and calculus.
• Domain expertise in one or more areas: natural language processing (NLP), symbolic reasoning, speech processing, etc.
• Ability to translate research insights into roadmaps, technical specifications, and product improvements.

AI Research Scientist | Machine Learning | Deep Learning | Natural Language Processing | LLM | Hybrid | San Jose, CA

Position Summary:

We are seeking experienced CNC Mill Machine Operators to join our manufacturing team in Santa Clara. This role is responsible for operating CNC milling machines, monitoring production, and ensuring parts meet quality specifications. Candidates must have hands-on shop experience operating CNC mills and be comfortable using precision inspection tools to verify part accuracy.

Key Responsibilities:

• Operate CNC milling machines to produce parts according to specifications
• Monitor machine performance and make basic adjustments as needed
• Perform in-process inspections using precision measuring tools such as micrometers, calipers, and pin gauges
• Ensure parts meet quality standards and report any defects or issues
• Maintain a clean, organized, and safe work environment
• Follow production schedules and communicate any issues with supervisors or leads

Requirements:

• 1–2 years of CNC mill operating experience in a manufacturing or machine shop environment
• Hands-on shop experience required (school training alone is not sufficient)
• Experience operating CNC Mills (not CNC Lathes)
• Ability to use inspection hand tools such as micrometers, calipers, and pin gauges
• Strong attention to detail and commitment to quality
• Ability to work in a fast-paced production environment

About Pinterest:

Millions of people around the world come to our platform to find creative ideas, dream about new possibilities and plan for memories that will last a lifetime. At Pinterest, we're on a mission to bring everyone the inspiration to create a life they love, and that starts with the people behind the product.

Discover a career where you ignite innovation for millions, transform passion into growth opportunities, celebrate each other's unique experiences and embrace theflexibility to do your best work. Creating a career you love? It's Possible.

At Pinterest, AI isn't just a feature, it's a powerful partner that augments our creativity and amplifies our impact, and we're looking for candidates who are excited to be a part of that. To get a complete picture of your experience and abilities, we'll explore your foundational skills and how you collaborate with AI.

Through our interview process, what matters most is that you can always explain your approach, showing us not just what you know, but how you think. You can read more about our AI interview philosophy and how we use AI in our recruiting process here.

Pinterest is seeking an Engineering Manager to lead our User Understanding team. This team builds and maintains the data and backend systems that drive user modeling, personalization and recommendations-impacting hundreds of millions of users every day. You'll set technical vision, empower a talented group of engineers, and collaborate closely with Machine Learning, Product, and Data Science to unlock better user experiences. We're looking for a leader with deep infrastructure expertise, a passion for personalization and ML-driven experience, and a strong record of delivering ML-enabling platforms at scale.

What you will do:

• 
  
• Lead and mentor a team of experienced machine learning engineers in developing advanced user understanding models and systems, which are integral to key Pinterest products across Discovery, Ads, and Growth.
  
• Collaborate cross-functionally with partners in Product, Data Science, and Engineering to define strategy, set priorities, and effectively integrate user insights into core systems and product features.
  
• Drive experimentation and adoption of new user understanding models with product teams across Pinterest, ensuring measurable end-to-end impact on key metrics.
  
• Manage project execution and stakeholder communication, including roadmap planning, technical decision-making, risk mitigation, and progress updates to achieve business goals.
  
• Provide thought leadership in user modeling and recommender systems by setting a long-term technical vision and advancing the state-of-the-art in the field.
  
• Foster a collaborative, inclusive, and high-performing team culture.
  
  

What we're looking for:

• 
  
• 6+ years of industry experience in applied machine learning or closely related roles, with experience developing large-scale machine learning for recommendation or ads systems.
  
• 2+ years of people management experience leading engineering teams.
  
• Demonstrated ML expertise with a proven track record of impactful solutions and a deep understanding of large scale distributed systems.
  
• Strong technical leadership, including a passion for driving technical direction, system architecture, and designing robust, scalable ML solutions.
  

In-Office Requirement Statement:

• 
  
• We recognize that the ideal environment for work is situational and may differ across departments. What this looks like day-to-day can vary based on the needs of each organization or role.
  

Relocation Statement:

• 
  
• This position is not eligible for relocation assistance. Visit ourPinFlexpage to learn more about our working model.
  

#LI-AK7
#LI-REMOTE

At Pinterest we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. The position is also eligible for equity. Final salary is based on a number of factors including location, travel, relevant prior experience, or particular skills and expertise.

Information regarding the culture at Pinterest and benefits available for this position can be found here.

Our Commitment to Inclusion:

Now Hiring: Entry-Level Machine Operators (3rd Shift) – Manitowoc, WI

3rd Shift | Monday–Friday | No Weekends | Full-Time (40 hours/week)

Looking for steady hours and a long-term opportunity? If you’ve built a reliable work history in fast-paced roles (warehouse, food service, retail, hospitality, caregiving, etc.), we’ll train you to become a machine operator—no manufacturing experience required.

3rd Shift Schedule + Pay

• 3rd Shift: 10:00 PM – 6:00 AM
• Pay: $18.75/hr
• Monday–Friday (no weekends)
• On-site in Manitowoc (54220 area)

Why You’ll Like This Role

• Paid, hands-on training—learn from the ground up
• Stable, consistent schedule
• Opportunity for raises and advancement
• Clean, structured environment with clear expectations
• Great fit if you’re dependable, coachable, and ready for a career move

What You’ll Do (We’ll Train You)

• Operate plastic molding machines
• Follow step-by-step work instructions
• Inspect parts for quality (visual checks)
• Keep your work area clean and organized
• Follow safety guidelines and use proper PPE

What We’re Looking For

• Reliable attendance and consistent work history
• Willingness to learn and follow directions
• Comfortable standing, moving, and lifting throughout the shift
• Positive attitude and team mindset

Apply Today or for more information reach out to Kristin.

• Call: (92
• Text: (92
• Email: 

Manitowoc, WI
Work 36 Hours, Get Paid for 40!

If you’re looking for a hands-on manufacturing role with a shorter workweek and full-time pay, this weekend opportunity could be a great fit. We are hiring Machine Operators for an overnight weekend shift with strong training and premium pay.

If you enjoy working with your hands, learning new skills, and want a consistent schedule, keep reading.

• Weekend Shifts: Friday–Sunday, 11:00 PM – 11:00 AM & 11:00 AM - 11:00 PM

• Training Period:
  Must be available to train on 1st shift (7:00 AM – 3:00 PM, Monday–Friday) for approximately 4–6 weeks

• Training Pay: $19.00/hour (1st shift)

• Weekend Shift Pay:

  • $19.00/hour + $4.00/hour shift premium = $23.00/hour

• Weekend Pay Structure:

  • Paid $23.00/hour for the 36 hours worked

  • PLUS 4 additional bonus hours paid at $19.00/hour

• Total: Get paid for 40 hours while only working 36

This pay structure rewards weekend availability while maintaining full-time earnings.

• Operate CNC machines in a production environment

• Measure and inspect finished parts to ensure they meet specifications

• Use precision measuring tools, gauges, and fixtures

• Follow work instructions and quality standards to produce quality parts

• Comprehensive training program provided

  • Combination of on-the-job and classroom training

• No prior CNC experience required — training is provided

• Enjoys hands-on, detail-oriented work

• Manufacturing experience preferred, but not required

• High School Diploma or GED required

• Reliable, willing to learn, and able to commit to weekend hours after training

• 36-hour workweek with 40 hours of pay

• Premium weekend shift pay

• Consistent, predictable schedule

• Entry-level friendly with strong training

• Long-term opportunity in a stable manufacturing environment

Perform routine and non-routine cleaning tasks along with other staff on Meltblown equipment assuring their ongoing cleanliness

Ability to set-up, operate and troubleshoot and/or make proper machine adjustments to the process to produce quality product that meets and/or exceeds customer expectations

Understand and be able to do basic upkeep and troubleshooting on the following equipment:

• Meltblown machines in total including all sub-systems
• TSI Testers
• Cutters
• Presses
• Resin drying equipment
• Resin mixing equipment
• Silo and sensor for silo depth

Collaborate with and support engineering from Neillsville and Stoughton with new processes and products

Directly engage engineering and maintenance in a timely manner to assist with issues

Assist in creation of documentation for existing and new processes and procedures

Properly complete all documentation within the department including quality records, maintenance logs, production logs, 5S scores, etc as directed

Understand and apply media specifications as needed to maintain product quality.

Assist in managing scrap amounts by promptly addressing causes of scrap including involving engineering or maintenance

Calibrate machines and testing equipment per schedule and as needed, perform quality test procedures as required.

Support and maintain OE initiatives throughout designated work area

Responsible for completing weekly and monthly Preventative Maintenance on equipment.

Apply all safety, quality, ITAR, and other plant processes and procedures to the products

Keep department organized and focused to meet production demands (5S Sort, Straighten, Shine, Standardize, Sustain)

Communicate effectively with department, maintenance, engineering, plant leadership, and any other co-workers

Demonstrated ability to perform critical job functions (as outlined above) and train new employees in the department.

Other duties as assigned by the team leader or manager

Ability to follow directions, read blueprints, job data sheets, safety instructions, etc

Good written and oral communication skills

Must be a quick learner with strong problem solving skills

Must be very adaptive to change and be an active change agent

Must be motivated and self-driven, able to work with minimal supervision

1-2 years experience working in a similar position is preferred

Must be able to walk/stand at least 75% of the time including during required overtime hours.

Must be able to lift up to 35 lbs

Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures & regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training.

Quality Follows all applicable standard work, process documentation and quality procedures such as Statistical Process Control (SPC), poka-yoke and visual standards. Raises issues to minimize cost and quality exposures. Performs quality inspections. Identifies and controls non-conforming material.

Delivery Operates manual and automated equipment to manufacture and assemble product in order to create the proper characteristics and dimensions necessary to meet customer expectations. Demonstrates a high level of competency in core work skills. Achieves production goals. Works at the required cycle time or defined engineering standard. Maintains clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks and performs planned operator care and maintenance tasks. Remains flexible and performs other miscellaneous duties, as required, to meet production goals. Works with peers, skilled trades and support staff to maintain and identify equipment needing repair.

Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively in ways to improve quality, safety, process, material flow, and employee development.

We are deliberately working towards a brighter future. Our daily actions consider what is important to our people, our customers and our planet. We are focused on performance, durability and sustainability to serve the world better.

Job Identification 1389

Job Category Manufacturing

Locations 1401 E Division Street, Neillsville, Wisconsin, 54456, US

• 
  Operate production equipment safely and accurately to meet quality and productivity expectations under direct guidance.
• 
  Strengthen the safety culture by stopping work for hazards, reporting incidents immediately, and consistently using proper protective equipment.
• 
  Reduce risk by correcting hazards within your control and helping create an environment where everyone looks out for one another.
• 
  Protect product quality through strict adherence to standard work, process documentation, and inspection procedures.
• 
  Minimizing defects and cost by identifying non-conforming material early and raising issues before they affect customers. Identify and report all non-confirming material before they affect customers.
• 
  Support reliable delivery by operating manual and automated equipment at required cycle times and meet daily production goals.
• 
  Maintain a clean and organized work area to support efficiency, safety, and equipment performance.
• 
  Contribute to a strong team environment by communicating clearly, completing required training, and actively participating in improvements to safety, quality, and workflow.
  

• 
  
• 
  The ability to build strong working relationships and collaborate effectively with teammates, support groups, and cross-functional partners to achieve shared goals.
  
• 
  A communication style that adapts to different audiences, ensuring information is delivered clearly, respectfully, and in a way that supports understanding and alignment.
  
• 
  A customer-focused mindset that prioritizes quality, responsiveness, and solutions that meet or exceed customer expectations.
  
• 
  A commitment to continuous learning, actively seeking opportunities-formal and informal-to grow skills, expand knowledge, and take on new challenges.
  
• 
  A proactive approach to health and safety, consistently modeling safe behaviors, reporting hazards, and contributing to an environment where everyone looks out for one another.
  
• 
  The discipline to follow established procedures while recognizing when improvements can strengthen safety, quality, or efficiency.
  
• 
  The confidence to hold yourself and others accountable for meeting commitments and maintaining high standards of performance.
  

• 
  
• Able to become a certified dependent and independent machining operator. Continue to learn and gain machining knowledge and experience.
  
• Follows all applicable standard work, process documentation and quality procedures.
  
• Has the ability to train on non-critical / repetitive tasks like liner install, MBC install, subassembly operation, CMM, pack etc.
  
• Able to perform all the quality checks without supervision and make the right determination and adjustments based on results.
  
• Competent in LOTO and conducting PMs on machines.
  
• Able to rework parts on the machine.
  

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

What You Will Do

• Sets up and operates conventional and CNC (Computer Numerically Controlled) machines on proved-in complex precision production parts that are produced from materials varying from standard to exotic.
• Must maintain quality of set ups using skills that require a comprehensive knowledge of tools, tool geometry, feeds, speeds, and blueprint/ planning.
• Utilizing project and SIE (Standard Inspection Equipment) to ensure quality assurance while performing machining operations.
• Performs the removal of burrs and sharp edges on any metallic and nonmetallic fabricated parts.
• Must maintain acceptable finishes and hold part tolerances as specified by blueprint/planning requirements using a variety of manual and power equipment.
• Sets up and operates a variety of rotary, vibrating and tumbling equipment, along with grit blasting.
• Sets up and operates all relevant material prep equipment and accessories utilizing proper speeds and feeds to perform necessary shearing and cutting.
• Unit requires working with and using any available magnification or visual enhancement equipment (i.e. Standard microscopes, eye loops, optic visors) on a variety of small parts.

Qualifications You Must Have

• High School Diploma or Equivalency (GED).
• Two years recent experience within the last 4 years operating CNC and conventional machines.
• Works from verbal and written operation instructions such as, work orders, CNC data sheets, and blueprints.
• Ability to use inspection equipment, such as micrometers, dial calipers, thread gauges, plug gauges, and air gauges.
• Performs necessary machine and tooling offset changes to maintain setup.
• Evaluates tool wear and changes tools such as mills, inserts, drills, and reamers.
• Must be able to make minor edits to the CNC program such as tool stations and spindle direction.
• Must be able to work any designated shift to include overnight.
• Must pass practical test within 90 days of hiring into this position.
• The ability to obtain and maintain an Alcohol, Tobacco, Firearms and Explosives Access (ATF) clearance.

Or ALL of the following:

• Machine Tool Technology-Certificate: For (Computer Numerical Control (CNC) Machinist Concentration).
• Have completed the above Certificate Program with a minimum of a 3.5 grade point average.
• High School Diploma or Equivalency (GED).
• Must be able to work any designated shift to include overnight.
• Must pass practical test within 90 days of hiring into this position.
• The ability to obtain and maintain an Alcohol, Tobacco, Firearms and Explosives Access (ATF) clearance.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

• RTX solves some of the toughest challenges in aerospace and defense. That requires expansive thinking and bold innovation.

• Please consider the following role type definition as you apply for this role.
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.