Sifter Machine In Pharma Jobs in Usa

Assist with the set-up and operation of CNC production machines in order to produce production parts to required tolerances.

Wagstaff, Inc. is a family-owned, American engineering/manufacturing leader in the global aluminum industry. Innovation, service, integrity, and quality are the foundational cornerstones underpinning 76 years of successful industry leaders. Wagstaff prides itself in manufacturing 100% of its products at its two facilities in Spokane, Washington, and Hebron, Kentucky.

• Assist with the set-up and operation of CNC production machines in accordance with documented procedures
• Operate machines using best and safe practices
• Must produce parts within required tolerances
• Follow documented processes
• Maintain a high degree of quality
• Function as a team member and support other teams
• Maintain accurate paperwork
• Housekeeping/maintenance of work area and machinery

• High School diploma or GED
• Demonstrated mechanical aptitude and, at a minimum, the use of power hand tools such as drills and saws
• Preferred experience in the use of measuring instruments including tape measures, calipers, or micrometers
• Ability to follow safety rules and demonstrate a knowledge of safe operating procedures
• Perform housekeeping duties (Sweeping, emptying trash hoppers)

Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire.

Wagstaff, Inc. is an Equal Opportunity/Affirmative Action employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other characteristics protected by law.

PM22

PI57f3d747b341-26289-39658549

Job Title - Training Coordinator - Pharma Operations

Location - Easton PA

The Training Coordinator is responsible for the strategic coordination, compliance oversight, and administrative management of the employee development program within pharmaceutical operations or GMP‑regulated training. The Training Coordinator role require candidates with GMP‑regulated experience in a pharmaceutical setting. This role ensures training activities are aligned with operational demands, properly resourced, and fully compliant with company policies, OSHA standards, client requirements, and regulatory expectations. The training coordinator will maintain an audit-ready workforce ensuring employees are compliant and up to date on training records.

MUST HAVES -

• Direct experience maintaining training records in an LMS - need for accurate, audit‑ready training documentation.
• Demonstrated history of developing and delivering internal training in pharma & life sciences, as well as supporting SOP and job aid updates in regulated environments.
• Extensive experience in highly regulated FDA/GMP environments, supporting complaint management, audits, and compliance activities.
• Strong reporting skills, including trending, KPI analysis, and preparing audit‑ready materials.
• experience in warehouse‑specific training logistics, such as WMS familiarity, multi‑shift training calendars, and training around warehouse equipment certification (e.g., PIT/Forklift).
• experience with OJT verification workflows or tracking certifications/expiration dates tied to warehouse operations.
• troubleshooting classroom technology (e.g., handheld scanners or tablets used in training).

Education & Experience

• High school diploma or equivalent
• 2+ years of administrative and training coordinator experience, specifically within a background related to pharmaceutical operations or GMP‑regulated training. candidates with GMP‑regulated experience in a pharmaceutical setting.

Responsibilities:

• Develop and maintain comprehensive training schedules across all warehouse departments.
• Support facilitation of training on company policies, SOPs, safety standards, and operational systems (e.g., LMS, WMS/C3).
• Partner with warehouse leadership to ensure structured training programs are consistently executed for new hires and existing associates.

Logistics & Scheduling

• Training calendar coordination: Manage the master training calendar across 1st, 2nd, and 3rd shifts, ensuring training sessions do not disrupt peak shipping and receiving windows.
• Onboarding Logistics: Coordinate onboarding training for new associates, including safety gear (PPE) distribution, badge access, and classroom setup.
• Equipment Certification: Schedule and track practical evaluations and certifications for Powered Industrial Trucks (PIT) and other applicable equipment, ensuring only authorized personnel operate machinery.

Administrative & LMS Management

• Record Integrity: Maintain the training program within the Quality Management System and any required physical training documentation, ensuring every associate has a complete, accurate, and audit-ready training profile.
• Compliance Tracking: Proactively monitor certification and qualification expiration dates (e.g., PIT/Forklift, HazMat, Safety protocols) to prevent compliance gaps or operational disruption.
• SOP Document Control: Coordinate distribution and version control of Standard Operating Procedures (SOPs) to ensure associates are trained on current, approved processes.

Reporting & Auditing

• Audit Support: Prepare and present training documentation during internal audits, client audits, OSHA inspections, and regulatory reviews.
• Productivity Reporting: Generate reports on training completion rates and "Time to Productivity" for new hires to help Operations plan for peak seasons.
• OJT Verification: Collect, verify, and maintain On-the-Job Training (OJT) documentation to confirm hands-on competency validation by authorized supervisors.

Technical Skills:

• Advanced proficiency in Microsoft Office (Excel is critical for tracking metrics). Experience with Quality Management Systems and/or Warehouse Management Systems is a plus.
• Organization: Exceptional organizational skills with a "zero-error" approach to data entry, understanding that a missing record can lead to a regulatory finding.
• Communication: Ability to communicate clearly within a diverse workforce, from entry-level associates to senior facility management.
• Experience with "Train-the-Trainer" models in a manual labor setting.
• Ability to troubleshoot basic classroom technology (tablets, hand-held scanners used for training).
• Effective analytical, problem solving and decision-making skills (can gather and analyze data and information and draw conclusions). Able to think logically and analytically.
• Able to prioritize, organize tasks and time, and follow up. Performs responsibilities efficiently and timely. Able to balance multiple requests and meet deadlines.
• Able to work well in a team environment and as part of a team.
• Demonstrates ability to effectively lead a team to successful completion of a project.
• Knowledge of FDA and CFR requirements surrounding training

Perform routine and non-routine cleaning tasks along with other staff on Meltblown equipment assuring their ongoing cleanliness

Ability to set-up, operate and troubleshoot and/or make proper machine adjustments to the process to produce quality product that meets and/or exceeds customer expectations

Understand and be able to do basic upkeep and troubleshooting on the following equipment:

• Meltblown machines in total including all sub-systems
• TSI Testers
• Cutters
• Presses
• Resin drying equipment
• Resin mixing equipment
• Silo and sensor for silo depth

Collaborate with and support engineering from Neillsville and Stoughton with new processes and products

Directly engage engineering and maintenance in a timely manner to assist with issues

Assist in creation of documentation for existing and new processes and procedures

Properly complete all documentation within the department including quality records, maintenance logs, production logs, 5S scores, etc as directed

Understand and apply media specifications as needed to maintain product quality.

Assist in managing scrap amounts by promptly addressing causes of scrap including involving engineering or maintenance

Calibrate machines and testing equipment per schedule and as needed, perform quality test procedures as required.

Support and maintain OE initiatives throughout designated work area

Responsible for completing weekly and monthly Preventative Maintenance on equipment.

Apply all safety, quality, ITAR, and other plant processes and procedures to the products

Keep department organized and focused to meet production demands (5S Sort, Straighten, Shine, Standardize, Sustain)

Communicate effectively with department, maintenance, engineering, plant leadership, and any other co-workers

Demonstrated ability to perform critical job functions (as outlined above) and train new employees in the department.

Other duties as assigned by the team leader or manager

Ability to follow directions, read blueprints, job data sheets, safety instructions, etc

Good written and oral communication skills

Must be a quick learner with strong problem solving skills

Must be very adaptive to change and be an active change agent

Must be motivated and self-driven, able to work with minimal supervision

1-2 years experience working in a similar position is preferred

Must be able to walk/stand at least 75% of the time including during required overtime hours.

Must be able to lift up to 35 lbs

Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures & regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training.

Quality Follows all applicable standard work, process documentation and quality procedures such as Statistical Process Control (SPC), poka-yoke and visual standards. Raises issues to minimize cost and quality exposures. Performs quality inspections. Identifies and controls non-conforming material.

Delivery Operates manual and automated equipment to manufacture and assemble product in order to create the proper characteristics and dimensions necessary to meet customer expectations. Demonstrates a high level of competency in core work skills. Achieves production goals. Works at the required cycle time or defined engineering standard. Maintains clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks and performs planned operator care and maintenance tasks. Remains flexible and performs other miscellaneous duties, as required, to meet production goals. Works with peers, skilled trades and support staff to maintain and identify equipment needing repair.

Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively in ways to improve quality, safety, process, material flow, and employee development.

We are deliberately working towards a brighter future. Our daily actions consider what is important to our people, our customers and our planet. We are focused on performance, durability and sustainability to serve the world better.

Job Identification 1389

Job Category Manufacturing

Locations 1401 E Division Street, Neillsville, Wisconsin, 54456, US

• Competitive base rate - $22.00-$32.20/ hour depending on experience.15% shift differential.
• Medical/Prescription Drug/Dental/Vision Benefits on Day 1 of employment
• 401(k) Retirement Savings Plan
  • 4.5% company match if you contribute at least 5%
• Quarterly Bonus potential
• Paid Time Off (PTO)
• 8 company paid holidays per year
• Employer paid Life Insurance, AD & D plus optional coverage for yourself, spouse and child(ren)
• Employee Assistance Program
• MN Paid Leave/and/or Short-Term Disability provided by ARCH
• $1,000 Sign on Bonus

• Inspects products during the machining operation to determine if parts meet specifications, complying with established standards and methods for inspection, testing, evaluation and calibration
• Follow all job work order instructions
• Must be able to run more than one machine where cycle time permits
• Complete all required shop floor documentation for the job including both part-dimensional and visual inspection
• Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; reports to management/maintenance the need for machine repairs
• Understands and comply with company policy safety guidelines, quality systems requirements and housekeeping standards

• High school diploma or GED equivalent
• Due to contractual requirements, this position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

• Machine Tool Technology degree (completed or pursuing)
• A minimum of 1 years' experience operating a CNC Lathe machine
• Strong mechanical aptitude
• Ability to read and understand blueprints
• Strong attention to detail
• Effective verbal and written communication skills

Flexo Printing Press / Slitter Operator / Rewinder

Location: Marshall County, Indiana (Onsite)

Hours: Second Shift; Mon to Thurs 4:00 PM – 2:00 AM (10-hour shifts - off Fri to Sun)

Employment Requirements: Candidates must be able to pass a pre-employment drug screening (including THC), background check, physical examination, and provide a valid driver’s license.

Position Overview

We are seeking experienced Slitter, Rewinder, and Flexo Printing Press Operators to join our production team in Marshall County, Indiana. This is a hands-on manufacturing role ideal for candidates with experience operating slitter/rewinder equipment and working with materials such as film, paper, foil, or labels.

The selected candidate will be responsible for setting up, operating, and maintaining slitter, rewinder, or flexographic press equipment to ensure production goals and quality standards are consistently met.

Key Responsibilities

• Set up and operate slitter, rewinder, or flexo press machines according to job specifications
• Monitor machine performance and make necessary adjustments to maintain quality and efficiency
• Perform job changeovers with minimal downtime
• Inspect finished rolls for accuracy, proper tension, and defects
• Accurately record production and quality data
• Perform routine maintenance and basic troubleshooting
• Load, unload, label, and prepare materials for shipping
• Complete approximately two weeks of training on first shift prior to transitioning to assigned shift

Qualifications

• Previous experience operating slitter, rewinder, or flexographic press equipment preferred
• Experience working with film, paper, foil, or label materials
• Ability to follow safety procedures and wear required PPE, including steel-toe boots, hair nets, and beard nets
• Strong attention to detail
• Dependable with a strong work ethic

Schedule & Compensation

• Bi-weekly payroll via direct deposit
• Second Shift: Mon to Thurs 4:00 PM – 2:00 AM (10-hour shifts - off Fri to Sun)
• Must complete approximately two weeks of training on first shift

Benefits

• Health insurance (PPO and HSA options), including dental and vision — company covers 70% of premiums
• Short-term disability (12 weeks at 70% of gross wages)
• 401(k) with employer match
• Profit sharing after one year (vesting applies)
• Paid Time Off:
• 1 week after 1 year
• 3 weeks after 3 years
• 8 paid holidays
• Company-sponsored events and family-friendly activities

How to Apply

Qualified candidates are encouraged to submit a resume outlining relevant machine operation experience, particularly with slitter, rewinder, or flexographic press equipment.

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

KEY EXPECTED ACHIEVEMENTS
* Must be able to set up and run all machine shop equipment, including manual and CNC, such as lathes, mills, grinders and all other equipment associated with the production of precision parts.

Knowledge of all measuring equipment and techniques along with a strong understanding of math used in the machining field to include algebra, geometry and trigonometry. Knowledge of the metric system is a plus.
* Sound understanding of tolerances including geometric tolerancing.
* Able to perform under pressure when required due to breakdown of equipment
* Optimized Cost during the process of producing parts.(minimum scrap and waste).

Required experience:

• 3-5 years in a manual machining environment or 2 year AS Degree in Machine Tool Technology or Machining training and skills acquired while serving in the Military

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

Aseptic Fill/Finish | Liquid Drug Product

Weekend Day Shift -> Friday - Sunday from 6am to 6pm (2 openings)

Weekend Night Shift -> Friday - Sunday from 6pm to 6am (2 openings)

Full-time, Direct Hire with Full Benefits

A pharmaceutical manufacturing organization is seeking a Formulation Specialist to support bulk drug product preparation within an aseptic sterile fill/finish environment. This hands-on role is responsible for formulation, equipment operation, and cGMP manufacturing activities supporting aseptic production.

The position works closely with manufacturing, quality, and technical teams to ensure safe, compliant, and efficient batch execution while contributing to process improvements and operational excellence.

Key Responsibilities

• Perform weighing, dispensing, and formulation activities for liquid drug product manufacturing
• Set up, operate, clean, and maintain formulation and processing equipment
• Execute manufacturing operations within controlled and cleanroom environments
• Complete batch documentation and manufacturing records in accordance with cGMP requirements
• Support aseptic filling operations and equipment preparation as needed
• Assist with validation runs, engineering batches, and process troubleshooting
• Train and support team members on manufacturing procedures and best practices
• Participate in continuous improvement and equipment optimization initiatives
• Collaborate cross-functionally to ensure production timelines and quality standards are met

Basic Qualifications

• High school diploma or equivalent required
• Minimum 1+ year of GMP pharmaceutical manufacturing experience or 3+ years of related manufacturing experience
• Experience operating and maintaining production equipment in a regulated environment
• Basic computer proficiency (Microsoft Office and similar systems)

Preferred Background

• Bachelor's Degree with a Scientific focus (not required)
• Experience in sterile or aseptic pharmaceutical manufacturing environments
• Knowledge of cGMP regulations and good documentation practices
• Familiarity with SAP/ERP or inventory management systems
• Strong communication skills and attention to detail

Work Environment

• Pharmaceutical manufacturing facility supporting sterile drug product production
• Cleanroom and controlled manufacturing areas required (Grade A and Grade C)
• Hands-on production role with weekend schedule coverage

DUTIES AND RESPONSIBILITIES:

• Complete production plan by scheduling and assigning personnel, establishing priorities, monitoring progress, revising production schedules as needed, resolving production problems
• Ensure all tooling and coolant is ordered as needed
• Review prints and work with engineering to update as required
• Report results of process flow for shift production
• Maintain workflow by monitoring steps of the process, monitoring personnel and resources, observing control points and equipment, facilitating corrections to malfunctions within process and machinery
• Revise procedures by analyzing operating practices and implementing changes as required
• Ensure all machined parts are manufactured to dimensions and tolerances shown on part drawings with appropriate surface finish quality
• Meet or exceed department productivity goals as set my management
• Maintain quality by establishing and enforcing a quality program
• Ensure proper operation of equipment by calling for repairs, maintenance, evaluating new equipment and programming
• Use information from production performance records to improve production rates through training and coaching of employees
• Maintain consistent department focus on unattended operation of lathes
• Educate employees on use of equipment and resources
• Set expectations for employee’s performance, provide them with tools needed to perform and monitor to ensure compliance
• Maintain safe and clean work environment
• Maintain compliance with established policies and procedures by educating and directing employees on the use of equipment and resources
• Communicate with other employees and departments about work related processes
• Identify employee issues and work toward solutions with the assistance of HR and management
• Update information in Global Shop as necessary
• Perform additional related duties as required

JOB REQUIREMENTS/SKILLS

• Ability to program and design part fixtures as needed
• Manage processes and process improvements
• Plan production including prioritizing jobs and manpower to complete jobs on schedule
• Ability to identify areas of process improvement
• Ability to communicate job expectations, monitor and appraise results
• Ability to effectively coach and counsel employees on performance and behavioral issues

EDUCATION/EXPERIENCE:

• Previous supervisor experience a plus
• Experience programming Haas lathes and mills
• Experience with prioritizing workload and staff assignments

PHYSICAL REQUIREMENTS/WORK ENVIRONMENT:

• Ability to lift 20-50 lbs. occasionally
• Ability to work in non-air conditioned manufacturing environment
• Constant standing
• Frequent bending and stooping
• Clean work environment
• Exposure to noise, dust, and airborne particles
• Safety training and other required PPE provided
• Must submit to pre-employment drug screening and criminal background check