Set Seg Jobs in Usa

Ready Set Grow Learning Center is seeking an experienced School Director to lead daily operations, support staff, and partner with ownership to build a stable, high-quality early childhood program.

This role is ideal for a proven Director who thrives in ownership-level responsibility, values professionalism, and believes a strong culture comes from clarity, consistency, and care.

About the Role

The School Director is responsible for the day-to-day leadership and operation of the school, including staff management, parent communication, compliance, scheduling, and enrollment support.

Ownership is actively involved at a strategic level and committed to empowering the right leader with real authority, trust, and growth opportunity.

This is a clean-slate leadership opportunity with strong ownership support.

Key Responsibilities

• Lead, coach, and support teaching staff with clear expectations
• Build a positive, professional, and respectful workplace culture
• Manage scheduling, staffing, and daily operations
• Serve as the primary point of contact for parent communication and escalations
• Oversee licensing compliance and regulatory interactions
• Support enrollment goals and retention
• Partner with ownership on budget planning, staffing needs, and growth initiatives

Qualifications:

• Director Permit or Site Supervisor Permit preferred
• 12 core ECE/CD units
• At least 3 units specific to infant care
• 3 units in Administration
• 4 years teaching experience with children under age 5

OR:

• Degree in Child Development + 3 Administration units + 2 years teaching experience
• BA in Child Development + 3 Administration units + 1 year teaching experience
• Child Development Site Supervisor Permit or Program Director Permit

What We’re Looking For

• Prior experience as a School Director (required)
• Experience leading programs serving ages 0–5
• Strong leadership presence—warm, fair, and firm
• Confident decision-maker who can manage adults effectively
• Organized, professional, and detail-oriented
• Comfortable operating with autonomy and accountability
• Growth-minded leader open to expanding responsibility over time

Compensation & Benefits

• $70,000 base salary
• Performance-based bonus opportunities
• Stable, full-time schedule (5 days/week)
• Paid time off
• Meaningful autonomy and leadership authority
• Opportunity to grow into multi-site or senior leadership roles

We believe early childhood education should be warm, professional, and well-run.

We invest in leadership, support our staff, and expect excellence.

If you are a confident, experienced Director ready to lead with purpose and integrity, we’d love to meet you.

*Please upload:

• Resume
• Transcripts with ECE units/courses completed
• Permits
• Reference Page with at least 3 references

Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc and/or Okuma Controls
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PI629cfb2ee342-26289-39815000

Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Major Areas of Responsibility:

• Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g. Eurotech, Hardinge, etc.)
• Will work with blueprints, operation sheets, and other work instructions.
• Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
• Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.
• Performs complex set-ups of own work or for others.
• Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary.
• Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.
• Ensures that all manufactured parts are in full compliance to quality standards.
• Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.
• Replaces all worn or damaged tooling as necessary.
• Verifies and records actual part count, both prior to and upon completion of all work
• Performs all routine maintenance on the equipment and maintains all fluid levels.
• Keeps the equipment and work area clean and organized.
• Returns excess bar stock or material to the staging area.
• Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap.
• Notifies leadperson or supervisor of any parts shortages or machining problems/difficulties.
• Packs and washes/preserves parts as needed.
• Performs other machining and assembly operations as needed.
• Performs other related duties as required.
• Interacts with associates from all departments.
  

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc and/or Okuma Controls
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PI203eae3637ca-26289-38787192

• 
  
• Review the work order requirements and drawings, obtain fixtures and tools for preparation.
  
• Set up and operate CNC or manual lathes/mills to perform a variety of machining operations, to trace complex profiles requiring changes in set-up, speeds, feeds and tool angles per engineering drawings to meet daily production requirements.
  
• Set up and operate manual lathes/mills to perform a variety of machining operations i.e. perform single point threading per engineering drawings to meet daily production requirements
  
• Edit programs, speeds and feeds.
  
• Use manual tools to debur and degrease.
  
• Set-up and/or operate various drill presses, punch press involving drilling, taping, reaming, countersinking.
  
• Use jigs and fixtures, block or shim parts to level and align the irregular shaped parts.
  
• Check for concentricity, formed sections, steps or shoulder to close +/- tolerances of 0.001\" or less for faulty operation or defective material.
  
• Improvise machine set-up to perform non-standard type of work.
  
• Train entry level machinist.
  
• Report any problems or difficulties to the supervisor.
  
• Maintain work area, equipment and supplies in a neat and orderly condition & 6S.
  
• Following safety procedures and policies.
  
• Perform other work-related duties as assigned.
  

• 
  
• 2~ 5 years of experience in machining
  
• Able to set up and operate CNC machine
  
• Understand of G codes and M codes
  
• Able to read drawings and blueprints, calculate or determine dimensions not given.
  
• Able to work independently.
  
• Able to use measuring equipment, including caliber, micrometers, checking gauge etc.
  
• Data input skills / computer skills.
  
• PLC knowledge of controller to be able to edit programs.
  
• Knowledge of operating manual secondary equipment, drill press, saw, punch press, etc.
  
• Able to operate lathes and/or mills
  
• Knowledge of turning, facing and boring to hold tolerances +/- 0.001.
  
• Lifting up to 50lbs
  
• EHS awareness
  
• Flexibility in shift times.
  
• Flexibility in working overtime.
  

• 
  
• HS Diploma/GED or equivalent
  
• Associate's / Technical Degree (two years) is preferred.
  

• US Citizen

Essential Duties and Responsibilities:

• 
  
• Read and interpret blueprints, technical drawings, and shop sketches
  
• Set up and operate CNC machines to perform tasks such as drilling, grinding, milling etc.
  
• Use all conventional machine shop equipment and machinery to cut, machine and shape raw materials in accordance with drawing requirements
  
• Build fixtures and various holding devices as needed to hold or support work pieces in process
  
• Analyze job requirements and use best shop practice to meet drawing requirements in the most efficient time
  
• Inspect high precision parts using blueprints and adhering to GD&T tolerances
  
• Supervise multiple machines while they execute the tasks and make any necessary adjustments to tool offsets and G&M code to keep part in tolerance
  
• Use correct feeds and speeds to ensure quality dimensions as well part finishes with different types of materials
  
• Determine tools needed to perform given task and set-up those tools accordingly
  
• Check run out of tools to ensure part will cut on size
  
• Understand tool wear and how to compensate as well as understanding how to prevent tool wear
  
• Set tool offsets and diameter compensation
  
• Set multiple 3-axis work offsets within (1) program
  
• Perform machine set-ups with little to no set up instructions
  
• Edit G&M code on the controller as well as on PC with .TXT documents
  
• Operate forklift as needed
  
• Assemble machined or fabricated components as needed
  

Qualifications:

• 
  
• Proficient in performing machine set-ups with little to no set up instructions
  
• Thorough understanding of measuring instruments, on-the-job use: Tape measure, calipers, OD micrometer, depth micrometer, bore gauges, surface gauge, height gauge, gauge pins, gauge blocks, pitch micrometer, ID micrometer, blade micrometer, thickness gauges, radius gauges
  
• Understand the process to square material up correctly
  
• Proficient in the use of various hand tools as necessary to achieve finish requirements
  
• Ability to effectively use power driven equipment
  
• Understand tool deflection and how to combat it in different types of materials
  
• Understand part flatness and how to achieve flatness with different types of materials
  
• Proficient in proofreading G&M code to ensure no crashes or mistakes occur as well as performing a test run to ensure program outputs are accurate
  
• High mental and visual effort required
  

Minimum Requirements:

• 
  
• 1-3 years experience as a machinist
  
• High school diploma or equivalent
  
• Completion of formal apprenticeship program or completion of in-company, four-year training program
  

Physical Demands:

• While performing these job duties, the employee is routinely required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; use fingers and hands to type or write; reach with hands and arms; talk or hear; taste or smell. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to lift 50 pounds.

Work Environment:

• This position is performed in a manufacturing environment, with some local travel between facilities.

Fairlead Integrated, LLC. and its subsidiaries are proud to be Equal Employ Opportunity and Affirmative Action employers (Minority / Female / Disability / Veterans).

To apply for this position, go here: Employment Application Fairlead Integrated

• 
  
• Plan, set-up, prepare and perform fabrication, assembly, test and associated precision fabrication processes.
  
• Plan, set-up and operate a variety of tools and equipment such as power presses, band saws, belt sanders, expanders, and power shears to cut, form, trim, fit, roll, bend, drill and saw material to fabricate detail parts following established methods and procedures.
  
• Plan, set-up, and perform resistance spot welding and salt braze processes.
  
• Operate a variety of conventional and CNC/NC equipment to perform milling, drilling and turning operations to established methods and procedures.
  
• Plan, set-up, edit programs, and operate various presses and lasers to cut and form details.
  
• Plan, set-up, and perform pressure, leakage and functional tests.
  
• Plan, set-up and operate furnaces for processes such as drying, annealing, aging and curing product.
  
• Receive, unload, check, record, prepare, inventory, store, disburse, and deliver a variety of materials, products and equipment.
  
• Maintain rough stores, cribs, gage cabinets, and point of use storage areas. Order, organize, and store such items as supplies, materials, chemicals and tools.
  
• Safety wire, prepare product, make and apply nameplates and package for shipment.
  
• Fabricate and repair containers.
  
• Participate in review, analysis and ordering of purchased parts and materials to ensure appropriate inventory levels. Communicate with suppliers on delivery and quality concerns.
  
• Review open purchasing and shop part requirements. Review regularly with internal suppliers and purchasing. Coordinate and expedite deliveries as required.
  
• Perform visual, dimensional and functional inspection using variable measuring instruments such as micrometers, verniers and checking fixtures.
  
• Mix and apply bonding agents, coatings and chemicals.
  
• Check calibration of gages, instruments and equipment in accordance with established procedures. Record and document as required.
  
• Prepare test pieces and micros using equipment such as grinders, cutters, sanders, polishers and mounting presses.
  
• Sharpen or modify tools, make up simple forming dies, tooling and templates.
  
• Perform periodic maintenance such as cleaning and lubricating fixtures and equipment, adding fluids, charging filters and tightening hardware.
  
• Participate in audits of processes, procedure and work areas.
  
• Use computers and office equipment to record and process transactions.
  
• Utilize and maintain all necessary documentation such as logs, reports, charts, sampling plans, statistical process control records and nonconformance documents.
  
• Instruct one or two fellow employees in proper performance of duties.
  
• Utilize statistical methods to monitor process control and capability. Use data to investigate areas for potential process improvement.
  
• Improve processes and solve problems in cooperation with fellow employees and technical support.
  
• Move parts and materials to designated locations in accordance with material flow procedures, and initiate follow-up lists.
  
• Keep equipment and surroundings neat, clean and organized.
  
• Perform related duties as required within the scope of this job function.
  
• 3rd Shift: 12am to 7am, Monday to Friday.
  
• Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.
  

• 
  
• Must have a high school diploma or GED.
  
• 1-2 years of experience in quality control and inspection processes.
  
• Prior use of air tools and fixtures to set-up parts for welding and understanding of location gages such vernier calipers and depth micrometers.
  

• 
  
• Sheet metal working skills such as grinding, bending, cut-off tools, polishing, deburring.
  
• Experience completing pressure test, assembly of Heli coils, riveting, and spot welding.
  
• 5-7 years of relevant experience in quality control and inspection processes.
  
• Familiarity with statistical process control (SPC) and other quality assurance methodologies.
  
• Experience with the use of precision measuring instruments and inspection equipment.
  

• 
  
• Medical, dental, and vision insurance
  
• Generous 401(k) plan that includes employer matching funds
  
• Collins provides eligible employees with paid time off
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

• Always exhibit a friendly and approachable demeanor. Be polite and courteous when speaking with guests and team members. Look for and act upon opportunities to assist guests and team members. Be sincere and genuine during all interactions. Be prepared with the knowledge and skill required to be responsive to guests and team member’s needs and questions.
• Responsible for learning and being familiar with all room outlets, Server functions, and for being able to answer general questions regarding the property.
• Provide superior guest service by positively affecting interactions with guests and team members.
• Set tables and prepare beverages and proper condiments (butter, sour cream, dressing, etc.).
• Keep banquet areas clean and organized.
• Work in cooperation with other service personnel to provide a high quality of service.
• Anticipate and provide for guests’ needs throughout entire function; ensure guest satisfaction; respond quickly and efficiently to guest complaints.
• Accurately account for and collect payment for all orders through POS system in a timely manner.
• Responsible for set up and break down of functions and making sure the next function is set up for success.
• Coordinate with banquet staff and other restaurant personnel to provide excellent guest service.
• Check all supplies, ensuring adequate stock levels, restocking all necessary items.
• Assist with overall functions and ensure dining and serving areas are set up and maintained according to standard.
• Maintain complete knowledge of table/seat/station numbers, hours of operations, proper table set-up and dress code of the restaurant.
• Limit problems related to guests’ excessive drinking by providing responsible alcohol service and applying any training from the responsible alcohol certification course.
• Observe and adhere to Health Department regulations regarding food handling, storage, proper steam table temperature, and cleanliness of work environment.
• Abide by all State, State Gaming, Federal and Corporate liquor Regulations. Also pertaining to serving alcoholic beverages to minors and intoxicated guests.
• Use and maintain all assigned areas and equipment in a sanitary, safe and effective manner.
• Consistent attendance at company/restaurant training programs as they are scheduled.
• Carry out duties with attention to detail, sanitation and safety.
• Complete opening, closing and other side duties as assigned by the supervisors.
• Pass all tests given including the training in order to retain the knowledge needed to be an effective server.
• Maintain a well-groomed, neat and clean appearance.
• Possess the resiliency to deal with difficult guests in all types of business conditions and possess the ability to work harmoniously with coworkers.
• Perform all job functions in conjunction with the guidelines described in the Standard Operating Procedures manual to ensure consistent execution of company and department standards.
• Perform all duties as assigned by management.
• This position is physical in nature and requires the ability to balance and carry equipment weighing up to 50 pounds as well as maneuver in order to clean banquet areas, organize stock and restock storage rooms.
• This position also works in an environment that is subject to varying levels of crowds, noise and smoke; the severity of which depends upon customer volume.
  
  

• Experience carrying large trays with up to ten covered dishes.
• Knowledge of wine service.
• Knowledge of table service procedures and table etiquette.
• Excellent customer service skills.
• Ability to use all equipment associated with the position, including chafing dishes, plate warmers, coffee urns and hot boxes.
• Ability to inspect and maintain areas for which responsible.
• Ability to effectively and efficiently move around banquet areas.
• Ability to communicate effectively in English with customers and all levels of employees.
• Ability to review and comprehend necessary documentation.
• Ability to multitask effectively.
  
  

Job Summary:

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Essential Job Duties:

• Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
• Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
• Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
• Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
• Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
• Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
• Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
• Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
• Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.

Experience & Skills:

• Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
• Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
• Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
• Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
• A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
• High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
• Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
• Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.

Physical Demands:

Legend

N (Not applicable)

Activity is not applicable to this position

O (Occasionally)

Position requires this activity up to 33% of the time (0-2.5 hours/day)

F (Frequently)

Position requires this activity up to 66% of the time (2.5-5.5 hours/day)

C (Constantly)

Position requires this activity more than 66% of the time (5.5+ hours/day)

Lift/Carry 10-30lbs

F

Stand

F

Walk

F

Manually manipulate

F

Squat or kneel

O

Bend

O

Reach above shoulder

O

PIcdef49d468

HelloTech is a nationwide, on-demand tech support platform. HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs. Our goal is to make technology accessible to everyone and it all starts with you!

This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobs they accept based on their skill sets and other personal factors.

• 
  
• Set Your Own Schedule - Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-set
  
• Get Paid Weekly - Techs average $100+ per job. Add skills to your profile to increase your weekly earnings
  
• Join the Community - Grow your skill-set and network while bettering people's lives through tech
  

As a Technician, you will provide on-site user support for customers in need of help with their various technology devices and systems. You will be able to select from a range of jobs such as:

• 
  
• TV Mounting
  
• Computer/Printer/Networking Support
  
• Home Theater Installation
  
• Smart Home Installation
  
• In-Wall Cable Running
  

• 
  
• Understanding of various technology devices, including installation, set up and security
  
• Great attitude and enjoy helping people!
  
• Car/transportation required
  
• Must be at least 18 years of age
  

In a HelloTech Home, Technology Just Works