Sentence Using Enchanted Jobs in Usa

DUTIES AND RESPONSIBILITIES: Perform routine and First Article mechanical and visual inspections of procured materials, manufactured product, tooling and/or processes per IDEV documentation (drawings, specifications, procedures, workmanship standards and RII?s). Create and document inspection routines and instruct others in the operation and use of measurement equipmentDocument DHRs, log sheets as requiredDocument non-conformances for yield information??Develop solutions to a variety of problems of moderate scope and complexity??Confer with supervisor and engineers on recommendations. Work is reviewed for soundness of judgment and overall adequacy and accuracy.

QUALIFICATIONS: High school education or equivalent. A minimum of four years experience in a manufacturing environment. A minimum three years inspection experience in a medical device or related company preferred (CMI, CQT or equivalent certification highly preferred).

EXPERIENCE AND SKILLS: Must have excellent written and oral communication skills. Ability to write compound/complex sentences and read simple instructions in English:Ability to perform expanded basic arithmetic calculations??Ability to multi task and able to act independently with minimal supervision in semi-structured assignments. Must be able to lift 50 lbs. and be able to sit/stand for 2 to 3 hours at a time. Computer skills - Ability to perform basic computer operations and utilize intermediate features of software packages such as Microsoft Excel and Word, Manufacturing ERP systems, etc.

Top 3 skills: Prefer to have experience in CMM's and in experience in vision systems and MicroView, VU.

“Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.”

If you are inclined, I would be happy to set up some time to chat more about your background and career interests to see if there could be a possible match. Please feel free to call me on 732-806-7467 or send me email on

Regards

Niraj kumar

Job Description

The Compliance and Privacy Manager oversees, in pertinent part, the following compliance risk areas: (i) general compliance and compliance program effectiveness; (ii) fraud, waste and abuse and Deficit Reduction Act of 2005 workforce member and contractor compliance; (iii) patient and employee confidentiality, organizational privacy, information governance, and data risk classification; (iv) accountable care organization compliance; (v) Medicare C & D/Medicare Advantage compliance program requirements; (vi) Federal healthcare program compliance; and (vii) other assigned risk areas identified through organizational experience, risk identification activities, or regulatory mandates.

• The Manager will support the Director of Corporate Compliance to ensure implementation of appropriate policies and procedures, support compliance training, conduct investigations.
• Perform compliance program effectiveness reviews based on the seven (7) elements of an effective compliance program as set forth in: (i) relevant U.S. Department of Health and Human Services compliance program guidance; (ii) U.S. Sentencing Commission Guidelines Manual; (iii) U.S. Department of Justice, Criminal Division, compliance program guidance; (iv) CMS Conditions of Participation; (v) Medicare Shared Savings Program Accountable Care Organization Compliance guidance and regulatory requirements; and (vi) Medicare C & D/Medicare Advantage compliance program requirements.
• Maintain a system of reporting and ensure the integrity of all compliance investigations, direct and coordinate internal audits, and monitor HIPAA/Patient Privacy compliance.
• The Manager ensures that the Compliance Program effectively promotes prevention, detection, and resolution of instances of improper conduct to ensure conformity to state or federal laws, regulatory requirements, hospital policies, patient privacy, IT Security or the standards of conduct.
• The Manager will be responsible for following up on reported incidents of non-compliance, conduct and or coordinate internal investigations and prepare reports on the incidents and investigation findings.
• The Manager will be responsible for assessing compliance of the organization's policies and assist in updating or developing new policies.
• The Manager will assist in evaluating areas of potential billing, Stark, Anti-kickback compliance or patient privacy risk and collaborate with other managers within the organization to work with management to implement solutions to eliminate potential risks.
• Manage and investigate compliance questions, complaints, and reported incidents in collaboration with management, legal and human resources, as needed.
• Responsible for Compliance Program data analytics to develop reports for monitoring and auditing, case management and federal reporting.
• Responsible for developing organizational wide compliance communication plan, communications, and training programs.
• Coordinate HIPAA Security compliance activities with the AH HIPAA Security Officer/Information Security Officer.
• Investigate HIPAA-related complaints and draft corresponding reports.
• Draft responses to HIPAA-related regulatory inquiries.
• Review business associate agreements, data use agreements, and limited data set agreements and ensure said agreements are acceptable as to compliance form and meet standard form internal requirements.
• Conduct risk assessments and audits pertaining to assigned compliance risk areas.
• Conduct compliance and privacy training and education.
• Prepare PowerPoints and present educational or compliance-related topics to AH constituents.
• Draft compliance and HIPAA-related policies and procedures, as well as policies and procedures related to other assigned risk areas.
• Assist in conflict-of-interest reviews, evaluations, and determinations.
• Assist in conflict-of-interest endorsement requests reviews.

Qualifications:

• Education: A Juris Doctor degree from an ABA accredited law school and admission to the bar to practice law in one of the 50 States (or Washington, D.C.) of the U.S. is required. The holding of a Master’s Degree in public health, healthcare, accounting, allied health, clinical-related studies, compliance, audit, computer science, finance, education, law, privacy, information security, information governance, or another field related to the responsibilities of the position at hand, is a plus.

• Certifications: Candidates who hold the “CCEP” or “CHC” designation from the Compliance Certification Board are strongly preferred. Any successful candidate who does not hold the “CHC” designation at the time of appointment will be required to obtain the same within 12 months of appointment. A successful candidate must obtain either the “CISA”, “CRISC”, or “AAIA” designation from ISACA within eighteen (18) months of employment.

Experience:

• Five years minimum of health care compliance experience, health care administration, legal, fraud, waste, and abuse; internal audit, organizational compliance, regulatory affairs or a filed related to the responsibilities of the position at hand, is preferred.

• Experience in conducting compliance investigations, legal internal investigations, or similar investigations is required;

• Managerial experience in a healthcare organization or related setting is preferred.

Technical:

• Proficiency in Microsoft Word, Excel, PowerPoint.

Other Required Skills

• Demonstrated current knowledge of business ethics, legal and compliance risks.

• Advanced and highly developed communication and influencing skills.

• Excellent writing skills.

#LI-AW1

About Us

At Atlantic Health System, our promise to our communities is; Anyone who enters one of our facilities, will receive the highest quality care delivered at the right time, at the right place, and at the right cost. This commitment is also echoed in the respect, development and opportunities we give to our more than 20,000 team members. Headquartered in Morristown, New Jersey, we are one of the leading non-profit health care systems in the nation.

We also have more than 900 community-based healthcare providers affiliated through Atlantic Medical Group. Atlantic Accountable Care Organization is one of the largest ACOs in the nation, and we are a member of AllSpire Health Partners.

We have received awards and recognition for the services we have provided to our patients, team members and communities. Below are just a few of our accolades:

• 100 Best Companies to Work For ® and FORTUNE® magazine for 15 years
• Best Places to Work in Healthcare - Modern Healthcare
• 150 Top Places to work in Healthcare - Becker's Healthcare
• 100 Accountable Care Organizations to Know - Becker's Hospital Review
• Best Employers for Workers over 50 - AARP
• Gold-Level "Well Workplace": Wellness Council of America (WELCOA)
• One of the 100 Best Workplaces for “Millennials” Great Place to Work® and FORTUNE® magazine
• One of the 20 Best Workplaces in Health Care: Great Place to Work® and FORTUNE® magazine
• Official Health Care Partner of the New York Jets
• NJ Sustainable Business

Atlantic Health System offers a competitive and comprehensive Total Rewards package that supports the health, financial security, and well-being of all team members. Offerings vary based on role level (Team Member, Director, Executive). Below is a general summary, with role-specific enhancements highlighted:

Team Member Benefits

• Medical, Dental, Vision, Prescription Coverage (22.5 hours per week or above for full-time and part-time team members)
• Life & AD&D Insurance.
• Short-Term and Long-Term Disability (with options to supplement)
• 403(b) Retirement Plan: Employer match, additional non-elective contribution
• PTO & Paid Sick Leave
• Tuition Assistance, Advancement & Academic Advising
• Parental, Adoption, Surrogacy Leave
• Backup and On-Site Childcare
• Well-Being Rewards
• Employee Assistance Program (EAP)
• Fertility Benefits, Healthy Pregnancy Program
• Flexible Spending & Commuter Accounts
• Pet, Home & Auto, Identity Theft and Legal Insurance

____________________________________________

Note: In Compliance with the NJ Pay Transparency Act (effective Sunday, June 1, 2025), all job postings will include the hourly wage or salary (or a range), as well as this summary of benefits. Final compensation and benefit eligibility may vary by role and employment status and will be confirmed at the time of offer.

EEO STATEMENT

Atlantic Health System, Inc. is an equal employment opportunity employer and federal contractor or subcontractor and therefore abides by applicable laws to protect applicants and employees from discrimination in hiring, promotion, discharge, pay, fringe benefits, job training, classification, referral, and other aspects of employment, on the basis of race, color, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, disability, age, genetics, or veteran status.

• Job Identification22703
• Job CategoryLegal/Comp/RiskMgmt/GovAffairs
• Posting Date10/01/2025, 06:44 AM
• Job ScheduleFull-Time
• Locations 475 South Street, Morristown, NJ, 07960, US
• Minimum Salary (Hourly Rate)58.560000
• Maximum Salary (Hourly Rate)103.060000
• Assignment CategoryFull-time
• Hours per Week37.5
• Primary ShiftDay
• Work Schedule8 am - 4 pm
• Days and ShiftsM-F 8am to 4pm
• Department1 Legal Internal Audit - Corporate Compliance
• DivisionCorporate
• SpecialtyOther
• Service LineOther
• RegionCorporate
• Salary Admin PlanPRO
• Overtime StatusExempt

Please Find Below Job Details:

Job Title: Instructional Designer

Duration: 06 months

Location: Foster City, CA

Payrate: $62/hr - $65/hr

In this role, you’ll translate complex business requirements into engaging learning solutions, collaborating closely with subject matter experts and key stakeholders. You’ll lead the design and development of impactful, measurable courses and resources that enable teams to effectively engage with and service the company’s products.

The ideal candidate brings a strong grasp of adult learning principles and a track record of creating innovative, learner-focused training.

As an Instructional Designer, you'll:

• Design educational content rooted in instructional design principles, ensuring learning objectives align with business priorities.
• Partner with SMEs and cross-functional teams to co-create dynamic curricula (classrooms, workshops, and e-learning), using AGILE methodologies for continuous improvement.
• Create interactive online learning experiences with authoring tools, focusing on clarity, structure, and collaboration with eLearning developers, while streamlining production through evolving templates and tools.
• Assess and refine training solutions for quality, scalability, and measurable impact, incorporating leader input and aligning with brand guidelines and strategic priorities.
• Facilitate planning sessions with stakeholders and synthesize feedback into clear, actionable instructional strategies; travel up to 15% as needed.

Role specifics and target candidate profile

• Follows the ADDIE methodology -Problem solving skills -Able to create a simplified training solution around complex technical concepts -Ideally has Automotive industry background, designing trainings around high voltage/electrical systems -Very independent, able to hit the ground running with minimal oversight/direction To summarize the role in a sentence: "Someone who can take a bunch of complex technical information and synthesize it so folks from various backgrounds and technical know-how can understand and learn from."

Required skills

• Qualifications 6-8 years of instructional design experience, with a focus on blended learning, OLT, ILT, and vILT. Automotive / EV / Collision industry preferred but not required.
• 2+ years of experience in the automotive industry is preferred but not required.
• Strong conceptual design skills with the ability to visualize and articulate instructional flows and learner experiences.
• Able to work independently and collaboratively in a fast-paced environment with frequent change and limited oversight.
• Strong communicator and creative problem solver who brings curiosity, clarity, and empathy to learning design.
• Experience creating learning evaluation plans. Working knowledge of eLearning authoring tools, such as Articulate 360 (Rise & Storyline), Camtasia, Vyond, Canva, and the Adobe Creative Suite.
• Bachelor's degree in Instructional Design, Educational Technology, Engineering, or related field. Portfolio of ID work samples preferred but not required

This position is responsible for the safe transportation of industrial and commercial parts and large equipment to and from various customer job locations and branch stores, while adhering to company safety regulations and state laws. This position has major responsibilities to ensure external and internal customer satisfaction. Qualified driver has more than (5) five years of experience and/or demonstrated job relevant knowledge/skills. Has a broad knowledge of the field's standard and technical concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of standard, complex, and technical tasks; is self-starting and requires minimal supervision. Must have a valid Class A CDL with the proper endorsements.

The incumbent in this position is expected to model the following practices daily: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development.

Essential Functions:

• Transports all equipment deliveries and pickups in a positive, caring manner while striving for promptness, accuracy and efficiency
• Secures equipment onto truck and ensures that materials meet state and federal guidelines for safe transport and vehicle capabilities. Assists other departments whenever required in an efficient manner
• Completes DOT required drivers daily log accurately and without misrepresentation
• Completes driver's daily inspection report, making recommendations for repair or maintenance, as well as being responsible for the clean appearance of company assigned vehicle
• On an accurate and timely basis, completes and submits all related documentation in order to maintain the established business systems / process and ensures that the company is achieving its business goals. (I.e. Rental agreements, equipment check out and check in reports, return receipts, pick up receipts, non-movement, permits, etc.)
• Ensures that all physical resources (overall shop appearance, staging area, tools, parts, inventory, personal hygiene, etc.) are maintained in clean, working order in order to ensure a safe working environment and exceptional customer satisfaction
• Perform pre- and post- vehicle inspection; Inspect truck for defects and safe operating condition, before, during, and after delivery trips
• Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards
• Performs other duties as assigned

Knowledge, Skills, and Abilities:

• Sound knowledge of industrial engine, transportation, and safe driving procedures
• Knowledge and understanding of Motor Carrier Safety Regulations/DOT guidelines
• Demonstrates proficiency with current computer software, related hardware, and machine electronic systems
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance
• Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction
• Quality control analysis skills - conducting tests and inspections of products, services, or processes to evaluate quality or performance
• Operation and control skills - controlling operations of equipment or systems Equipment selection skills determining the kind of tools and equipment needed to do a job
• The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions
• Ability to read maps and operate GPS systems
• Ability to maintain a clean driver's record and diligent attention to safety - eLog
• Ability to operate hand tools, power tools, and equipment used in mechanical repair
• The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble small objects
• The ability to read and understand information and ideas presented in writing
• The ability to listen to and understand information and ideas presented through spoken words and sentences

Education and Experience:

• Five years of verifiable heavy haul driving experience required, over eight years preferred
• Three years' verifiable driving experience operating a 7 or 8 axle configuration truck required, five or more preferred
• High school or equivalent diploma preferred
• Valid Texas Driver's License with Class A CDL required to include the ability to maintain the Valid Texas
• Texas Driver's License

Supervisory Responsibilities: None

Travel: Travel up to 100%

Physical Requirements:

• Must be able to remain in a stationary position 100% of the time
• Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue.
• Frequently moves materials or equipment weighing up to 50 pounds
• Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina
• Ascend/descend with gradual or continuous progress by oneself, using both hands and feet and climb up and down ladders
• Be able to safely maneuver and work underneath equipment
• Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work

Work Environment:

• Requires working in a closed vehicle or equipment
• Requires wearing common protective or safety equipment
• Requires working outdoors, exposed to all weather conditions including extreme conditions such as heavy rain, wind, or excessive temperatures
• Includes exposure to sounds and noise levels that are distracting or uncomfortable
• Exposure to small quantities of chemicals, steam, high-pressure water, and high speed rotating equipment
• Significant time spent in confined spaces and/or high places

Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.

PURPOSE AND SCOPE

This position isresponsibleassembling mechanical, hydraulic and electrical components to customer supplied specifications.

This position isrequiredto follow established safety procedures in and around the production area, tocomprehendand conform toestablishedquality guidelines, and todemonstrategood housekeeping skills in the work area and on the production floor.

ESSENTIAL DUTIES AND RESPONSIBILITIES

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

The incumbent maybe responsible forother specific and essential duties and responsibilities with respect to each of the skills set regardless of certification status.

Operate small hand tools such as power screwdrivers, overheadcrane, banding and testing equipment, airtoolsand hammers in a safe, prescribed manner.

Meet the set daily production rate for the department.

Read and complete necessary forms and documentation including work orders, inspectionsheetsand log sheets.

Properly set up,assemblyall current models and standard options in compliance with product specifications to ensure customer satisfaction.

Sets upcomponentparts in a secure position using bolts,clampsor tack welds.

Follow established quality,safetyand production procedures.

Locate and retrieveappropriate productionmaterials as required.

Assemble products to engineeringspecificationwith the highest level of quality.

Make suggestions for improvementtoproducts and processes.

Participate in Lean Manufacturing events including Kaizen events, 5S activities and other training.

EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED); and at least three months related experience and/or training; or equivalent combination of education and experience.Ability to read andutilizea tape measure.Ability to complete paperwork as required.Ability to read and understand prints in relation to part size anddimensionsand specifications.Ability toutilizecomputersystemneeded toidentifycomponentlocation

LANGUAGE SKILLS
Ability to read a limited number of two-and three-syllable words and to recognize similarities and differences between wordsand betweenseries of numbers.Ability to print and speak simple sentences.

MATHEMATICAL SKILLS
Ability to add,subtracts, multiply, anddividesin all units of measure, using whole numbers, commonfractionsand decimals.

PHYSICAL DEMANDS
While performing the duties of this job, the employeeis regularly required tostand;use hands to finger,handleorfeel;talk or hear. The employeefrequentlyis required towalk and reach with hands and arms. The employeeis occasionally required tostoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT
While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles.The employee is occasionally exposed to toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.Personal Protective Equipment (PPE) isrequired.

What We Offer

At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:

• Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.

• Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.

• Time for You: Paid holidays, vacation time, and personal/sick days each year.

Join us and build a career where you're supported - at work and beyond.

Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Work Location Type

Onsite

About VLS!

VLS Environmental Solutions, LLC, is a recognized leader in providing sustainability solutions, with three divisions providing industry-leading services. With a mission to innovate solutions to meet clients' sustainability goals, VLS has over 1,200 employees in 40+ locations across North America.

Waste Services

VLS Waste Services provides customized waste processing solutions for hazardous and non-hazardous industrial and commercial waste, including landfill diversion and sustainability programs, solidification of liquid waste, recycling, wastewater treatment, and waste sequestration.

Railcar Services

VLS Railcar Cleaning and Repair Services division provides specialty cleaning services for difficult-to-clean products, including chemicals, hardened materials, and pressurized gases, and comprehensive repair services for certified full-service repairs, tank car qualifications, and maintenance.

Marine Services

VLS Marine Services division offers state-of-the-art barge cleaning, repair, and gas-free facilities for various chemical solvents and downstream petroleum products.

Job Summary

VLS Environmental Solutions LLC is the recognized industry leader in providing environmental solutions to our industrial and manufacturing clients. A financially stable company that has experienced significant organic and inorganic growth over the past several years, VLS offers the perks of a big company (competitive pay, great time off packages, and solid benefits, including paid life insurance and a 401(k) match of up to 5%) combined with the collaborative and results-driven culture of a small one.

The Diesel Fleet Mechanic position optimizes the department workflow, quality, & efficiency through maintaining equipment in a well-trained & an effective / collaborative team environment. This position supports the fleet and is responsible for maintaining mobile equipment and systems to provide dependable support to the Lancaster, PA and Baltimore, MD locations. They will support the fleet in an accurate and efficient manner while observing regulatory requirements and company safety policies / procedures.

Responsibilities

• Performs inspection, maintenance, & repairs on heavy duty vehicles (trucks, tow motors, trailers, etc.)
• Responsible for diesel engines, transmissions, brake systems, electrical trouble shooting, steering, & cooling systems
• Tracks and monitors all maintenance work through the RTA software program
• Repairs and maintains mechanical equipment:
• Ensures all jobs in the shop and plant area are completed in a proficient and safe manner
• Uses computers to issue parts and update comments on work orders/task list including diagnostic programs for engines and hydraulic systems, etc.
• Ensures all personal protective equipment is used as needed
• Monitors garage / plant for supply stock and cleanliness
• Establishes & maintains effective communication / coordination with staff & management:
• Coordinate with dispatch / drivers to schedule routine maintenance & discuss problems
• Provide professional & respectful treatment to drivers, visitors, employees, & management
• Inform management of area activities & significant problems
• Carry a communication device & monitor it at all times while clocked in
• Performs other duties as required

Qualifications

• High School Diploma/GED
• Mechanical knowledge of tools and machines, including their uses, repair, & maintenance required
• Valid Class A CDL strongly preferred
• 1-5 years’ related experience preferred
• Basic Welding Experience preferred
• Must pass pre-employment criteria
• Must be 21 years of age or older
• Must be able to obtain TWIC clearance
• Must be able to pass a DOT physical & drug screen
• Must be able to pass a background check
• Must be able to read and comprehend service and repair manuals
• Must be able to work independently with minimal supervision
• Must keep work area clean, organized, and safe

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this position, the employee is regularly required to:

• Ability to move hand together with arm or two hands to grasp, manipulate or assemble objects
• Must be able to lift up to 50 lbs, and occasionally be required to lift up to 100 lbs
• Understand written sentences and paragraphs in work related documents
• Must be able to stand; walk; sit; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and smell
• Work near moving mechanical parts and in a loud environment
• Ability to coordinate two or more limbs (for example, two arms, two legs, or one arm and one leg) while sitting, standing or lying down
• Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate or assemble small objects.
• See, hear and verbally communicate. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

The above statements are intended to describe the general nature and level of the work being performed by person/people assigned to this work. These are not to be construed as an exhaustive list of all duties, responsibilities, and skills associated with it. VLS reserves the right to amend and change responsibilities to meet business and organizational needs.

What's in it for you!

At VLS our employees are the core of our business. As such, we value our employees' physical, mental, and financial wellbeing by providing first class, high value benefits and resources that are centered around a proper work-life balance.

Physical and Mental Wellbeing: VLS is committed to supporting our employees' physical and mental health by providing:

Medical, Dental and Vision Insurance - Based on each employee's need, we offer various high quality, low-premium medical, dental and vision plans, which include our first-in-class concierge service (available in Spanish) and 2nd MD Offering.

Flexible Spending Accounts (FSA) and Healthcare Saving Accounts (HSA) - Set aside pre-tax money to use toward your health care spending. VLS provides an employer contribution to all HSA accounts.

Time Off - We offer 11 (eleven) company-paid holidays, in addition to our paid time off and voluntary time off plans.

Employee Assistance Program - 24/7 assistance and counseling services that are 100% confidential and free to all employees and their dependents.

Telemedicine - All employees and dependents receive free virtual visits by licensed practitioners any time, any day...including holidays!

Financial and Retirement Planning: At VLS we offer the following to assist our employees with planning around their finances and saving for retirement:

401(k) - Generous 401(k) matching program after 90 days of employment. VLS will match up to 5% of your pay every pay period. Matching contributions are 100% vested immediately.

Life and Disability Insurance - Employer-paid life insurance, along with short-term and long-term disability coverage provided to all full-time employees.

Voluntary Life Protection Plans - Employees and their dependents can elect coverage in our voluntary life/add, critical illness, hospital indemnity and accident plans.

Rewards and Recognition Programs - We celebrate our employees! From birthdays to anniversaries and other various milestones/achievements, we have programs in place to recognize our employees.

Financial Planning - Free One on One financial planning with a certified Financial Planner/Coach.

Employee Discount - Employee Discount Program for savings on everyday goods and services at various retailers throughout the US.