Segregation Meaning Jobs in Usa

Location: Oak Park, Illinois

Business Unit: Rush Oak Park

Hospital: Rush Oak Park Hospital

Department: Pharmacy

Work Type: Full Time (Total FTE between 0. 9 and 1. 0)

Shift: Shift 4

Work Schedule: 8 Hr (6:00:00 AM - 11:00:00 PM)

Rush offers exceptional rewards and benefits learn more at our Rush benefits page ( ).

Pay Range: $20.19 - $28.52 per hour
Rush salaries are determined by many factors including, but not limited to, education, job-related experience and skills, as well as internal equity and industry specific market data. The pay range for each role reflects Rush’s anticipated wage or salary reasonably expected to be offered for the position. Offers may vary depending on the circumstances of each case.

Summary:
The Pharmacy Technician III assists licensed pharmacists in the practice of pharmacy performing the duties described in the Technician II position description as well as serving as a role model for other technicians through added responsibilities, specialization in technician pharmacy practice, demonstrating leadership and initiative, and fulfilling the needs of the department.
The Technician III is actively involved in the training and development process and the development of policies and procedures specific to their practice site and is responsible for the daily technical operations of the area. The Technician III must have the capacity to work effectively and efficiently in areas routinely requiring a higher degree of prolonged technical concentration, liability, and risk.

Other information:
Required Job Qualifications:
• Must be a high school graduate or equivalent.
• Current State of Illinois Pharmacy Technician license.
• Individual must have EXCPT and/or PTCB (Pharmacy Technician Certification Board) certification.
• Individuals licensed BEFORE January 1, 2008 are grandfathered; they are not required to become nationally certified or hold the "Certified" designation to continue working as a registered pharmacy technician in Illinois.
• At least 6 months of previous experience as a pharmacy technician.
Preferred Job Qualifications:
• Two years of college training or its equivalent.
• ACPE IV certification.
• Hazardous drug compounding certification.
Physical Demands:
• Ability to lift/move 30-50 pounds.
• Ability to stand for long period of time (4+ hours) between breaks.
• Ability to crouch when filling dispensing cabinets and bend or stand on a stool as necessary.
• May be exposed to certain hazardous materials, including but not limited to chemotherapeutic agents.
• This position requires up to 10% travel. Employee needs to be able to work extended hours due to business needs.
Competencies:
• Must meet the competency requirements of a Pharmacy Tech II.
• Competency demonstrated and ability to train others in at least seven of the tasks below:
A. IV Compounding
B. Hazardous drug identification and compounding
C. Crash Cart restock/outdate process/reporting running
D. Fluids ordering/restocking
E. Narcotics/CII Safe receive, send, return, expire transactions and report running
F. OR/Anesthesia ADC restock/troubleshooting
G. Pediatrics drug identification and compounding
H. ADC configuration, set up, troubleshooting, report running, review, and analysis
I. MPI Prepacker
J. Storeroom ordering
K. Recalls; processing, segregating and removing from inventory/ADCs
• Ability to effectively follow directions, analyze problems and interpret analytical data.
• Strong communication skills with an emphasis on customer service skills.
• Accountable for his/her actions, progress and development.
• Attention to detail to provide high quality care and accurate medication preparation.
• Ability to operate technology accurately and efficiently by the end of the defined training period.
• Consistently demonstrates leadership and initiative to peers and others in handling workload.
• Planning, prioritizing, and analyzing situations are frequently.
• Consistent outstanding attendance record relating to tardiness and absences.

Responsibilities:
• Active participation in the Pharmacy Department Technician Career Ladder development and ongoing revisions.
• Interacts professionally and appropriately with other healthcare professionals and Rush system employees.
• Demonstrates ability to coach/train other technicians and pharmacy students.
• Demonstrates adaptability, initiates action, manages work, contributes to team success, communication, professional knowledge and technical skills, continuous learning and exhibits a passion for the Rush Mission, Vision and Values according to the Department of Pharmacy Technician Career Ladder expectations
• Recognizes and identifies various classifications of medications, medication names, dosage forms and routes of administration.
• Ability to use available print and online references as appropriate.
• Understand the pharmacy workflow for first doses, Automated Dispensing Cabinet (ADC) refills, cart fill and batches.
• Understand the pharmacy workflow for medication returns and medication disposal.
• Performs pharmaceutical calculations accurately including fundamental math calculations, metric conversions, pharmaceutical dose calculations and parenteral dose calculations.
• Responsible for the accurate interpretation of EPIC pharmacy labels:
• Interpretation and understanding of medical abbreviations.
• Identification and differentiation of various types of medication orders (Scheduled, PRN, Once, STAT, NOW).
• Ability to appropriately label all medication dosage forms including auxiliary labels for expiration and storage as required.
• Responsible for the accurate and timely filling and delivery of patient-specific medications and ADC restocks.
• Ability to troubleshoot ADC equipment (i.e.: failed drawers, inventory, outdates).
• Ability to utilize technology in the pharmacy including, but not limited to CII Safe, Carousels, DoseEdge, WASP, MILT, RxVerify as needed for assigned duties.
• Responsible for the preparation of non-sterile compounding and packaging:
• Ability to accurately draw up oral syringes, compound oral suspensions and other duties as assigned.
• Recognizes the regulations for repackaging medications and complies with all required labeling and documentation procedures for non-sterile compounding and packaging.
• Responsible for answering phones, assisting caller with missing medication requests and any other technical duties as assigned.
• Responsible for utilization of Epic for technical requests (i.e.: missing mediations, ADC out of stock and responding to in-basket messages)
• Responsible for inventory, storage and supply maintenance of assigned areas.
• Responsible for training and compliance with USP , USP , USP , and aseptic technique practices when preparing sterile and non-sterile products:
• Recognizes incompatible, unstable and/or expired compounded products.
• Maintains all required documentation of compounded products and production areas for sterile and non-sterile products.
• Recognizes investigational drug orders and documentation requirements for preparation and use.
• Responsible for exchanging emergency carts and completion of required documentation..
• Responsible for knowing the laws and regulations related to controlled substances.
• Maintain cleanliness of all equipment and work areas.
• Knowledge of departmental and Medical Center safety practices.
• Awareness of departmental quality assurance processes.
• Actively participates in various departmental committees and educational activities as assigned.
• Assists supervisor and pharmacist working in the area in the execution of related assignments involving technical support for the department
• Responsible for participation in the review, revision, and preparation of related policies and procedures for the Department of Pharmacy Policy and Procedure manual.
• Provides departmental support and leadership in fulfilling departmental staffing needs as required during short staffing situations.
• Any and all other duties as assigned.

Rush is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SCHEDULE: 12 hour shifts rotating day/night schedule

SUMMARY: Identifies and segregates defective material within individual slit rolls. Combines leftover good material into finished rolls and palletizes for shipment to the customer.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Mounts slit rolls of product onto shaft of machine using lift cart. Removes rolls as well.
• Sets up and makes necessary adjustments to the machine.
• Must be able to identify defects and splice good material together per spec.
• Reads and understands specs of products being run. Must know packaging materials required for palletizing finished product also. Occasionally uses hand tools to prepare packaging materials.
• Completes daily production reports.
• Operates stretch wrap machine to wrap finished pallets.
• Regularly cleans machine and surrounding area.
• Actively participates in safety programs and makes safety observations. Follows plant safety rules.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High school diploma or general education degree (GED). Dr Winder experience a plus.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually.

moderate

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

What we're looking for

• Education: High school diploma or general education degree (GED) preferred; minimum two years related experience and/or training; or equivalent combination of education and experience

• Experience - Previous experience in a manufacturing environment preferred.

• 1 - 3 years of related experience in a manufacturing facility, preferably a chemical plant.

Collaboration Tool: Microsoft Office Suite (Outlook, Excel, Word).

Preferred Qualifications:

• Experience in a chemical plant.

• MFG experience preferred.

• Understanding/familiaritywith cGMP and RCRA training.

• Strong organizational, prioritization, and problem analysis skills.

How you will thrive and create an impact

• Adheres to the company's strict safety regulations.

• Maintains a safe, clean, and organized work area, ensuring that others do the same.

• Learns and adheres to safety rules for the work area regarding the management of chemicals and equipment.

• Responsible for learning the safety hazards of processes, equipment, and materials and applying that knowledge during routine operations.

• Monitors and performs daily activities within the production area (processing/ packaging/ testing/ sampling) to ensure safety practices are being followed.

• Identifies and corrects potential hazards to ensure compliance with safety regulations.

• May assist with activities related to hazardous waste disposal, including properly identifying and classifying waste streams, ensuring segregation, and adhering to applicable regulations.

• May be responsible for devising and implementing safety improvements.

• Performs routine tasks such as cleaning, weighing, and set-up of systems for operation, packaging, and in-process testing.

• Will be trained on applicable manufacturing procedures.

• Performs routine maintenance and cleaning of production equipment to ensure its optimal operation.

• Corrects routine and non-routine problems by analyzing, troubleshooting, and correcting equipment/process problems.

• Monitor and record critical process parameters.

• Communicates with management on product testing results, trends, and deviations. Recommend process adjustments.

• Performs a wide variety of skilled duties in the preparation and operation of process equipment.

• Understand the mechanism of production machines and demonstrate the ability to identify areas of the operations process.

• Ensures packaging of finished goods meets all NuSil packaging specifications to meet customer requirements.

• Accurately uses computerized operating systems to run and monitor manufacturing equipment, if required.

• Is responsible for accurately completing and reviewing manufacturing and quality documentation, including all calculations and notes.

• May optimize and evaluate formulation levels for product workup.

• May collaborate with the Research & Development group when necessary.

• May be required to wear special garments in controlled manufacturing environments, including synthetic-material coveralls, beard covers, bouffant caps, booties, and/or powder-free vinyl gloves.

• May assist various departments with the proper collection and disposal of hazardous waste.

• May assist with the inspection/operation, and maintenance of various safety equipment and laboratory ware.

• May be required to wear special garments in controlled manufacturing environments, including synthetic-material coveralls, beard covers, bouffant caps, booties, and/or powder-free vinyl gloves.

• All employees are expected to maintain a safe work environment, obey safety rules, and exercise caution in all work activities.

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.

Why Avantor?

Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.

The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.

We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!

Pay Transparency:

The expected pre-tax pay for this position is

Actual pay may differ depending on relevant factors such as prior experience and geographic location.

EEO Statement:

We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

For more information about equal employment opportunity protections, please view the Know Your Rights poster.

3rd Party Non-Solicitation Policy:

By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

SCHEDULE: 7pm - 7am on 2-2-3 schedule

SUMMARY: Identifies and segregates defective material within individual slit rolls. Combines leftover good material into finished rolls and palletizes for shipment to the customer.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Mounts slit rolls of product onto shaft of machine using lift cart. Removes rolls as well.
• Sets up and makes necessary adjustments to the machine.
• Must be able to identify defects and splice good material together per spec.
• Reads and understands specs of products being run. Must know packaging materials required for palletizing finished product also. Occasionally uses hand tools to prepare packaging materials.
• Completes daily production reports.
• Operates stretch wrap machine to wrap finished pallets.
• Regularly cleans machine and surrounding area.
• Actively participates in safety programs and makes safety observations. Follows plant safety rules.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High school diploma or general education degree (GED). Dr Winder experience a plus.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually.

moderate

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Position Location:

This position is located in Los Alamos, New Mexico.

Los Alamos is a tight-knit mountain community that consistently ranks as one of 's Best Small Towns in America. The city is a top spot for outdoor enthusiasts as it has more than 120 hiking and biking trails, and residents enjoy easy access to the Pajarito Mountain Ski Area. Thanks to the University of New Mexico-Los Alamos' presence in the area, Los Alamos also has a college-town vibe that's a major draw for young professionals, families and retirees.

426.2: This position is subject to DOE Order 426.2, Personnel Selection, Training, and Qualification Requirements for DOE Nuclear Facilities, which establishes entry-level requirements to ensure candidates selected for specific positions can successfully perform the requirements of the job.

Position Summary

The job will require personnel to sort, segregate, and size reduce radioactive waste while wearing appropriate personal protective equipment with respiratory protection. Work must be executed compliantly in accordance to detailed operating procedures while working in a team atmosphere. The use of various hand tools and power tools will be required for daily job functions. While working to achieve N3B LLCC objectives, will ensure all activities and operations are performed in a safe and deliberate manner; will maintain required safety, security and operational training; assure procedural and regulatory compliance; and make safety, security and quality an integral part of every task; including taking the necessary steps to stop work if continuing the job is unsafe or compromises security.

Essential Duties/Responsibilities (may include, but are not limited to):

• Responsible for proper handling, packaging, treatment and documenting hazardous and radioactive waste exhibiting chemical and radiological hazards.
• Providing technical support including opening waste containers, removing waste items if possible, and describing the waste items and recording the results.
• Routine interaction with various personnel in coordinating characterization, certification, and disposition of waste items and ensuring compliance with regulatory requirements with regard to receipt, storage and disposal of waste items. .
• This position requires job specific/site specific training.

Minimum Qualifications (Knowledge, Skills, Abilities):

• Must have an understanding of work hazards, safety practices, and operating configurations
• Experience working in a team environment with a strong safety culture
• Work experience in a quality-oriented environment requiring a high degree of attention to detail
• Familiar with handling and/or transporting solid, liquid, hazardous, radioactive, and/or mixed wastes
• Familiar with applicable local, state, and federal laws and regulations relating to the handling of solid, liquid, hazardous, radioactive, and/or mixed wastes
• Familiar with legal requirements and environmental impacts affecting facility operations and administration
• Ability to understand inspection and/or characterization data on waste containers
• Experience in documentation and maintenance of records for solid, liquid, hazardous, radioactive, and/or mixed wastes
• Knowledge in the use of personal computers including database applications
• Ability to obtain certification as a forklift and qualified crane operator
• Ability to qualify in the use of personnel protective equipment including air purifying respirators
• Must be willing to work a variety of shifts (e.g. 8-hour days, 9-hour days, or 10-hour days
• Must have the ability to pass and maintain all qualifications as required by the Department of Energy (DOE) Order 426.2, and N3B
• Effective interpersonal skills (e.g., ability to work as part of a team, communicate effectively, work/interact effectively and amicably with people from diverse backgrounds and cultures)
• Excellent communication skills to effectively convey thoughts clearly and concisely, both verbally and in writing

Education and Experience Required:

Level 1: Must possess a High School diploma or GED with zero years of relative experience. Per DOE O 426.2, this position requires a High School diploma.

Level 2: Must possess a High School diploma or GED and two years of related experience. Per DOE O 426.2, this position requires a High School diploma.

Benefits and Salary:

N3B offers all full-time employees a comprehensive benefits package that includes 401(k) with employer matching, medical, dental, vision, paid PTO, and more. Starting salary will be commensurate with experience and education.

Business Associations:

Level 1: Contacts are primarily within immediate work unit. Contacts involve obtaining or providing information requiring little explanation or interpretation.

Level 2: Contracts are typically with individuals within their own department and occasionally with contact with outside own organization. Contacts involve obtaining or providing information or data requiring some explanation or interpretation.

Impact:

Level 1: Errors can be easily and quickly detected within the immediate work unit and would result only in minor disruption or expense to correct.

Level 2: Errors may be detected and corrected but may cause moderate loss of time or customer/user dissatisfaction.

Working Conditions and Physical Requirements:

Work will be performed in a complex environment involving radiological control and security areas. Work will be performed both inside and outside of buildings in varying weather conditions

Subject to adverse weather conditions, fumes, toxic agents and hazards associated in the operation and maintenance of waste disposition.

Safety, Security, and Quality

While working to achieve N3B LLCC objectives, the Waste Processing Operator will ensure all activities and operations are performed in a safe and deliberate manner to include protecting the confidentiality and integrity of Personally Identifiable Information (PII). This role will maintain required safety, security and operational training; assure procedural and regulatory compliance; and make safety, security and quality an integral part of every task; including taking the necessary steps to stop work if continuing the job is unsafe or compromises security.

Equal Opportunities

N3B is an equal opportunity employer. N3B will ensure no applicant for employment or employee is denied equal opportunity because of race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, training, and career development programs.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.