Seamans Mechanical Jobs in Usa
2,908 positions found — Page 3
C
Sr. Manufacturing Engineer, Mechanisms & Test
Salary not disclosed
About Castelion
Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We’re designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts.
Senior Manufacturing Engineer - Mechanisms/Test
Castelion is seeking an expert in the manufacture and design of complex mechanisms for our in-house hypersonic vehicle development. This role will work closely with design engineering and technician teams to build and execute on testing and validation efforts to keep pace with the research and development timetable of our products. You will be apart of a team responsible for serving as a critical node in implementing feedback from testing and validation efforts, streamlining designs and implementing manufacturing changes to quickly mature our products for flight testing and production. Desire for product and process ownership is a must in this role.
Responsibilities
- Work with component design engineering teams to determine the manufacturing and testing feasibility of products
- Operate as a standalone resource responsible for a family of mechanisms
- Architect, mature and develop testing and validation procedures for a wide array of complex mechanisms
- Generate concept proposals in alignment with R&D efforts to help attribute requirements gathering
- Down select solutions generated based on quantifiable vehicle attributes, system cost and weight
- Propose and defend solutions in engineering review meetings
- Develop and refine process documentation including build instructions, test and validation procedures, health and safety standards, and mBOMs
- Create, maintain, and communicate detailed production plans and schedules
- Work closely with supply chain to develop new and existing suppliers as needed
- Design, develop and implement production tooling and equipment
- Participate in design reviews to drive design for manufacturing (DFM)
- Oversee introduction and implementation of new products and manufacturing capabilities
- Analyze and resolve manufacturing issues and non-conformances
- Develop, mentor, and train peers and colleagues
Basic Qualifications
- Bachelor’s degree in mechanical, aerospace, or manufacturing engineering, or other technical degree.
- 5+ years of mechanisms manufacturing, testing and validation experience
- Experience with operations/product line management
- Demonstrated direct or indirect leadership
- Proficiency in CAD/CAM software (NX preferred)
- Experience in selection, procurement, and implementation/validation of manufacturing equipment
Preferred Qualifications
- Experience in mechanisms design, testing and validation from high volume production environments
- Experience developing comprehensive testing and validation procedures and the required documentation processes
- Experience in qualification and acceptance testing of complex aerospace mechanisms
- Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping
- Experience in transitioning development processes to rate production
Additional Requirements
- Must be willing to work extended hours and/or weekends as needed
- Must be able to travel up to 10%
- All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medial, vision, and dental insurance, and the company offers three weeks of paid time off per year.
Leadership Qualities
Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support.
High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion’s mission and consistently look for ways to contribute to the company’s technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity.
Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity.
ITAR Requirements:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Not Specified
C
Project Manager, Mechanical Procurement
🏢 Clayco
Salary not disclosed
About Us
Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects.
The Role We Want You For
As the Project Manager (Mechanical Procurement), you will lead HVAC/mechanical procurement from award through closeout—executing the buyout strategy, managing vendor performance, and ensuring equipment and materials arrive on time and per contract. You will partner with Clayco project teams, design partners, and field leadership to coordinate submittals, releases, logistics, and change management while maintaining strong supplier relationships and driving favorable commercial outcomes.
The Specifics of the Role
- Develop and execute project-specific mechanical procurement strategies from award to closeout, aligned to schedule, budget, and project standards.
- Lead vendor sourcing, qualification, and negotiations; establish and maintain relationships with OEMs, reps, distributors, fabricators, and service partners.
- Manage contracts/purchase orders for mechanical scopes (equipment, materials, services); track compliance to terms, insurance, and deliverables.
- Coordinate and manage the submittal process (equipment, specialties, controls, startup requirements), including review cycles and release milestones.
- Own order management and expediting: monitor lead times, manufacturing progress, FATs (when applicable), shipping, storage, and just-in-time deliveries.
- Drive coordination with field teams on access, rigging/setting plans, sequencing, and site constraints; resolve delivery and installation conflicts early.
- Manage changes: evaluate impacts, price change orders, document scope, and coordinate approvals with vendors and the project team.
- Approve invoices as required; verify received quantities, freight, tax, and alignment to progress/billing terms.
- Support closeout: warranties, O&M manuals, as-built documentation handoff inputs, spare parts, training/startup documentation, and final supplier reconciliation.
- Assist in seeking, exploring, and securing new revenue and procurement opportunities across the mechanical supply base (volume agreements, preferred vendors).
Requirements
- Strong knowledge of mechanical construction and HVAC systems/equipment; able to interpret plans/specs and manage procurement deliverables end-to-end.
- 5+ years of procurement experience preferred with demonstrated success managing buyout through closeout; strong mechanical/HVAC background required.
- Proven ability to manage multiple vendors and schedules simultaneously, including long-lead equipment and logistics constraints.
- Strong commercial acumen: contract terms, negotiations, escalation, freight, warranty/service provisions, and risk management.
- Excellent communication and documentation skills; proficiency with Excel and common PM/procurement platforms.
- Experience supporting large-scale commercial/industrial projects and major HVAC equipment procurement (AHUs, RTUs, chillers, boilers, pumps, BAS/controls) preferred.
- Experience building or administering volume purchasing agreements / preferred supplier programs preferred.
Some Things You Should Know
- Our clients and projects are nationwide – Travel will be required.
- No other builder can offer the collaborative design-build approach that Clayco does.
- We work on creative, complex, award-winning, high-profile jobs.
- The pace is fast!
- This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing.
Why Clayco?
- 2025 Best Places to Work – St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal.
- 2025 ENR Midwest – Midwest Contractor (#1).
- 2025 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5).
- 2025 ENR Top 100 Green Contractors – Green Contractor (Top 3).
- 2025 ENR Top 25 Data Center Builders – Data Center Contractor (Top 3).
Benefits
- Discretionary Annual Bonus: Subject to company and individual performance.
- Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more!
Compensation
- The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.
Not Specified
R
Project Manager – Construction / Mechanical Insulation
Salary not disclosed
Our client, a specialty contractor focused on mechanical insulation, is seeking an experienced Construction Project Manager to join their East Petersburg, PA branch.
In this role, you will oversee commercial, industrial, institutional, and government projects across Central & North Eastern Pennsylvania, Baltimore, and Washington, DC. The focus is on developing relationships, identifying new opportunities, and managing multiple mechanical insulation projects across diverse markets—including manufacturing facilities, institutional buildings, power plants, and other heavy industrial installations.
The Project Manager will serve as the primary client contact, overseeing estimating, proposal development, contract negotiations, and project execution. You will coordinate with branch and field teams, owners, general contractors, and other trades to ensure projects are delivered on time, within budget, and to client expectations. This role is ideal for a business-minded Project Manager who thrives on building relationships, growing accounts, and leading projects from proposal to completion.
If you have experience in mechanical insulation or mechanical contracting and want to join a growing industry leader expanding across Central & North Eastern Pennsylvania, Baltimore, and Washington, DC, we encourage you to apply!
Key Responsibilities
- Build and maintain long-term customer relationships, acting as primary point of contact throughout project lifecycle.
- Identify new opportunities through networking, client meetings, and prospecting to grow accounts and expand company presence.
- Develop sales strategies for target accounts and bid strategies for key projects.
- Solicit bid packages and procure drawings and specifications for qualified opportunities.
- Attend pre-bid meetings to clarify scope, specifications, and site conditions.
- Interpret specifications and perform material take-offs, focused on mechanical insulation projects.
- Prepare project schedules and proposals, including pre-bid reviews and go/no-go decisions.
- Oversee material and submittal preparation as required by contract conditions.
- Maintain regular communication with customer points of contact regarding project status, schedule, and potential impacts.
- Maintain job control systems, cost codes, accounting entries, and accurate invoicing.
Requirements
- 5+ years in mechanical insulation or mechanical contracting for commercial, industrial, or institutional construction projects.
- Proven experience developing new business, growing accounts, and managing client relationships.
- Full lifecycle project management experience, including estimating, scheduling, budget management, and field oversight.
- Comfortable working closely with general contractors, subcontractors, and field teams.
- Experience reading and interpreting mechanical and architectural drawings and specifications.
- Self-motivated, able to plan, prioritize, and execute with minimal supervision.
- Strong problem-solving, decision-making, and communication skills.
- Willingness to travel frequently across assigned territory.
Location: East Petersburg, PA
Travel: Frequent travel across Central & North Eastern PA, Baltimore, and Washington, DC
Benefits: Car allowance, mileage reimbursement, Medical, Dental, Vision, 401(k) with match, PTO, Life and AD&D, Short- and Long-Term Disability, annual performance review, Bonuses and Profit incentives
If this aligns with your experience and career goals, please apply and one of our recruiters will be in touch.
Follow us on LinkedIn: RL Talent Partners
Not Specified
W
Mechanical Specialist
Salary not disclosed
Job Role: Mechanical Specialist
Pay: $40.00/hr.
Location: Tobaccoville, Nc
Duration: Direct Hire FT
Shifts: 1st, 2nd, 3rd (must be flexible with working/training on all shifts)
Position Responsibilities
- Operate high-speed cigarette manufacturing and packaging equipment, including loading materials weighing up to 50 lbs.
- Perform routine, preventive, and corrective maintenance to ensure equipment reliability, quality, output, and regulatory compliance.
- Diagnose and repair complex mechanical issues; respond to machine alarms and system messages; adjust machine settings as needed.
- Complete high-level preventive maintenance across multiple technologies and subassemblies using equipment manuals and work instructions.
- Make standard machine adjustments, including timing, alignment, settings, format changes, and part replacement.
- Install, commission, and modify manufacturing and packaging equipment.
- Perform complex mechanical interventions and support, guide, and train other technical personnel.
- Conduct all required quality checks and tests per standard operating procedures.
- Enter maintenance and production data into SAP/CMMS and other systems; create repair records and work history.
- Order and verify materials and parts; confirm production specifications; monitor and respond to KPI data.
- Set up equipment for multiple products using MES, parts ordering systems, document management systems, and related applications.
- Work at heights up to 10 feet and operate industrial vehicles and powered lifts.
Required Experience, Skills & Qualifications
- Experience working in the cigarette manufacturing industry is mandatory
- Strong mechanical or electro-mechanical skills with the ability to perform advanced mechanical repairs.
- Proven experience diagnosing equipment issues and performing corrective maintenance.
- Computer proficiency, including Microsoft applications.
- Ability to meet WorkKeys requirements:
- Ability to operate industrial vehicles and powered lifts.
Preferred Qualifications
- Associate degree in Industrial Systems Technology, Mechanical Engineering Technology, Mechatronics, or related field (or military equivalent).
- Experience using SAP/CMMS systems.
- Knowledge of root cause analysis techniques.
- Strong written and verbal communication skills with internal teams and external vendors.
Extensive Employee Benefit package
- Retirement & Financial
- Health & Wellness
- Insurance (Health/dental/vision)
- Professional Development & Volunteering
- Paid Time Off
- Onsite health clinics and fitness center
Not Specified
E
Electro Mechanical Assembly Technician
Salary not disclosed
Position Summary
We are seeking a highly skilled and detail-oriented Electro Mechanical Assembly Technician to join our manufacturing team. The ideal candidate will have experience assembling complex, multi-faceted assemblies and sub-assemblies in a structured production environment. This role requires strong mechanical aptitude, a deep understanding of assembly hardware and consumables, and a commitment to quality and process control.
Attention to detail, adherence to quality standards, and the ability to work from engineering drawings and work instructions are critical for success in this position.
Key Responsibilities
- Assemble complex mechanical assemblies and sub-assemblies according to engineering drawings, work instructions, and specifications
- Interpret blueprints, BOMs, and assembly documentation
- Verify correct materials, hardware, and components prior to assembly
- Use hand tools, power tools, torque tools, pneumatic tools, and specialty fixtures appropriately
- Install various hardware types including fasteners, rivets, threaded inserts, pins, bushings, fittings, and mechanical components
- Apply proper assembly consumables (adhesives, sealants, thread lockers, lubricants, etc.) per specifications
- Perform in-process inspections and verify dimensional and visual quality requirements
- Maintain traceability and material verification in accordance with quality system requirements
- Document assembly steps and record required production data accurately
- Identify and escalate quality issues or discrepancies
- Maintain a clean, organized, and safe work environment
- Support continuous improvement initiatives within the production process
Required Qualifications
- 2+ years experience in mechanical assembly (manufacturing environment preferred)
- Experience with complex, multi-component assemblies and sub-assemblies
- Strong understanding of mechanical hardware types and proper installation methods
- Knowledge of assembly tools including torque wrenches, drills, presses, and precision measuring tools
- Familiarity with assembly consumables and proper application techniques
- Ability to read and interpret engineering drawings and technical documentation
- Experience working within a quality management system
- Strong attention to detail and commitment to producing high-quality work
- Ability to verify materials and components against documentation
- High mechanical aptitude
Preferred Qualifications
- Experience in aerospace, industrial equipment, or precision manufacturing
- Familiarity with AS9100, ISO 9001, or similar quality systems
- Experience with material traceability and inspection documentation
- Ability to perform basic quality inspections using calipers, micrometers, and gauges
- Experience working with ERP or manufacturing tracking systems
Key Competencies
- Detail-oriented and process-driven
- Quality-focused mindset
- Strong organizational skills
- Ability to work independently and as part of a team
- Strong problem-solving skills
- Dependable and accountable
Physical Requirements
- Ability to stand for extended periods
- Ability to lift up to 50 lbs
- Ability to use hand tools and perform repetitive tasks
Not Specified
L
Lead Mechanical & Electrical Maintenance Technician (Tech 3).
✦ New
Salary not disclosed
Job Description
Job Description
BAS Industrial Services is looking for an experienced lead mechanical & electrical maintenance technician (Tech 3). Only candidates with a minimum of 10 years conveyor experience will be considered for Tech 3 positions. Work history must be verified with references before being invited to an interview. BAS is a growing company, with advanced opportunities for those who qualify. If you have less than 7 years of experience, look for BAS Industrial Service entry level position posting. Great way to learn a new trade and get paid to do it.
About this position:
* The probation period (90 days) will provide you with an opportunity to demonstrate your skills, knowledge and work ethic. At 90 days if you have had no infractions, safety violations, good punctuality, good attendance you will become a permanent BAS employee. Milestones will be set for advance pay.
Responsibilities:
This position requires a very serious, organized and mature individual who can perform under pressure. Each shift often comes with different challenges. Lead Tech 3 must have the ability to solve these challenges by developing plans, directing resources to overcome unexpected breakdowns. Lead Tech 3 are responsible but not limited to the following:
* Enforcing safety discipline on all assigned tasks, leading by example, and mentoring other techs.
* Oversee safety meetings, safety training and ensure safety paperwork is completed.
* Promoting and conducting good housekeeping practices.
* Develop and maintain a good working relationship with customers and other BAS techs.
* Maintain and troubleshoot all conveyor systems, electrical and mechanical.
* Design solutions for difficult problems, be on call for emergencies, and handle multiple projects and daily activities.
* Manage Preventive Maintenance programs.
* Ability to install, maintain, and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, techs, and encoders.
* Understanding of PLC programs to troubleshoot ladder logic (read use for troubleshooting), components (CPU back plains, I/O boards, counters, modules, and devices) and communications modules (Ethernet)
* Manage outside contractors when needed.
* Physically capable of regular bending, lifting, stretching and reaching both below the waist and above the head.
* Engage in full manual dexterity in both hands and wrists.
* Capable of walking in the FC/DC and around area with great frequency; facilities are over a quarter mile in length.
* Capable of climbing ladders and gangways safely and without limitation.
* Ability to work in construction /distribution environments that may be noisy, unlit, unheated, not air-conditioned.
* Access all areas of building (ascending and descending ladders, stairs, etc.)
* Manage maintenance shift, assign tasks to technicians.
* Develop plans on the fly and direct resources to perform repairs of unscheduled breakdowns.
* Maintaining, troubleshoot, perform scheduled repairs of machinery and conveyor systems.
* Paperwork - Order parts, facilitate customer work orders, document daily work log, keep time records of employees.
Skills/ Experience Needed:
.Computer - Excel, Word, look for parts on internet. Computer savvy.
. Read electrical schematics, understand AC, DC, relay logic, controls, and motors.
. Read hydraulic systems.
* Electrical - Understand and read electrical schematics and drawings. Understand AC power, DC power, relays, relay logic, push buttons, switches, PLC's, VFD's, DC drives.
* Mechanical - Understand and read mechanical drawings, change motors, gearboxes, bearings, repair chain system, replace conveyor belt lacing and belt tracking.
* Hydraulics - Understand and read hydraulic schematics.
For more information, please contact BAS Industrial Services.
Company Description
Electrical / mechanical contracting business. We provide scheduled and unscheduled repair and maintenance service to the material handling industry.
Majority of our work is with conveyor systems.
Company Description
Electrical / mechanical contracting business. We provide scheduled and unscheduled repair and maintenance service to the material handling industry. \r
Majority of our work is with conveyor systems.
Job Description
BAS Industrial Services is looking for an experienced lead mechanical & electrical maintenance technician (Tech 3). Only candidates with a minimum of 10 years conveyor experience will be considered for Tech 3 positions. Work history must be verified with references before being invited to an interview. BAS is a growing company, with advanced opportunities for those who qualify. If you have less than 7 years of experience, look for BAS Industrial Service entry level position posting. Great way to learn a new trade and get paid to do it.
About this position:
* The probation period (90 days) will provide you with an opportunity to demonstrate your skills, knowledge and work ethic. At 90 days if you have had no infractions, safety violations, good punctuality, good attendance you will become a permanent BAS employee. Milestones will be set for advance pay.
Responsibilities:
This position requires a very serious, organized and mature individual who can perform under pressure. Each shift often comes with different challenges. Lead Tech 3 must have the ability to solve these challenges by developing plans, directing resources to overcome unexpected breakdowns. Lead Tech 3 are responsible but not limited to the following:
* Enforcing safety discipline on all assigned tasks, leading by example, and mentoring other techs.
* Oversee safety meetings, safety training and ensure safety paperwork is completed.
* Promoting and conducting good housekeeping practices.
* Develop and maintain a good working relationship with customers and other BAS techs.
* Maintain and troubleshoot all conveyor systems, electrical and mechanical.
* Design solutions for difficult problems, be on call for emergencies, and handle multiple projects and daily activities.
* Manage Preventive Maintenance programs.
* Ability to install, maintain, and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, techs, and encoders.
* Understanding of PLC programs to troubleshoot ladder logic (read use for troubleshooting), components (CPU back plains, I/O boards, counters, modules, and devices) and communications modules (Ethernet)
* Manage outside contractors when needed.
* Physically capable of regular bending, lifting, stretching and reaching both below the waist and above the head.
* Engage in full manual dexterity in both hands and wrists.
* Capable of walking in the FC/DC and around area with great frequency; facilities are over a quarter mile in length.
* Capable of climbing ladders and gangways safely and without limitation.
* Ability to work in construction /distribution environments that may be noisy, unlit, unheated, not air-conditioned.
* Access all areas of building (ascending and descending ladders, stairs, etc.)
* Manage maintenance shift, assign tasks to technicians.
* Develop plans on the fly and direct resources to perform repairs of unscheduled breakdowns.
* Maintaining, troubleshoot, perform scheduled repairs of machinery and conveyor systems.
* Paperwork - Order parts, facilitate customer work orders, document daily work log, keep time records of employees.
Skills/ Experience Needed:
.Computer - Excel, Word, look for parts on internet. Computer savvy.
. Read electrical schematics, understand AC, DC, relay logic, controls, and motors.
. Read hydraulic systems.
* Electrical - Understand and read electrical schematics and drawings. Understand AC power, DC power, relays, relay logic, push buttons, switches, PLC's, VFD's, DC drives.
* Mechanical - Understand and read mechanical drawings, change motors, gearboxes, bearings, repair chain system, replace conveyor belt lacing and belt tracking.
* Hydraulics - Understand and read hydraulic schematics.
For more information, please contact BAS Industrial Services.
Company Description
Electrical / mechanical contracting business. We provide scheduled and unscheduled repair and maintenance service to the material handling industry.
Majority of our work is with conveyor systems.
Company Description
Electrical / mechanical contracting business. We provide scheduled and unscheduled repair and maintenance service to the material handling industry. \r
Majority of our work is with conveyor systems.
Not Specified
D
Staff Mechanical Engineer
Salary not disclosed
"We create happiness." That's our motto at Disney Experiences. At Disney, you'll help inspire magic by enabling our teams to push the limits of entertainment and create innovative built environments. You will collaborate to develop ideas/thoughts into physical reality! The Architecture & Facilities Engineering (A&FE) team is looking for a Staff Mechanical Engineer to support the development and sustainment of projects we support throughout the Disneyland Resort. Our department supports a wide range of project types including Attractions, Maintenance, Foods, Merchandise, and Entertainment. Projects range from minor renovations to new facilities. You will also support immediate response efforts with reactionary projects.
You will act as the Staff Mechanical Engineering Owner's Representative with technical expertise for mechanical engineering issues, design management of in-house and outside resources, code compliance, Disney design standards, documentation, specifications, and life cycle cost analysis for best value. This role also involves close collaboration with other engineering disciplines and multiple Disney project teams including FAM, WDI, Entertainment, and Operations.
You will report to the Senior Manager for MEP Engineering with DLR Architecture & Facilities Engineering.
What You Will Do
* Act as Owner's Representative on projects from concept through construction at the Disneyland Resort. Project types will include shops, rides, hotels, shows, maintenance facilities, and nearly any built facility and area development found on our property.
* Manage the design and development of contract documents of projects with in-house and outside resources to meet project scopes, schedules and budgets.
* Develop concepts and Request for Proposals (RFP)s.
* Attend, participate, and problem solve during site visits from concept through construction.
* Review drawings and specifications and ensure that all projects are designed and executed to applicable codes and statutes
* Work with stakeholders to provide civil engineering resources to develop project scope including design, planning and code compliance for estimation and feasibility.
* Resolve design issues creatively and thoroughly coordinating design with other disciplines.
* Develop clear technical analyses and recommend frameworks to inform executive review and approval.
* Partner with internal teams to develop, maintain, communicate, and enforce Walt Disney Company design guidelines, standards, master specifications, and details.
* As the owner's representative, you'll review with a focus on constructability, efficiency, and long-term maintainability.
* Liaison with City officials and external agencies to ensure project scope and implementation is coordinated and compliant with external requirements.
* Research Record Drawings in Disneyland Archives.
* Perform field work to investigate and assess mechanical related infrastructure in the Resort.
* Independently review new and existing design drawings and calculations.
* Review shop drawing submittals and respond to vendor requests for information per Resort standards.
* Coordinate design activities and monitor field installations and demolition work that comply with specifications and code requirements.
* Perform reviews of existing infrastructure: propose upgrades and replacements, present findings and recommendations.
* Serve as Engineer of Record on assigned projects, including signing and sealing construction documents when required.
* Design with focus on constructability, efficiency, and long-term maintainability.
* Expedite the receipt of sample submittals required for final design approval.
* Participate in weekly design coordination meetings and prioritize items to minimize schedule impacts.
* Assist Project and Design Managers to resolve design compliance issues relating to Projects requirements. Validate that all Item Specifications are consistent with products installed before archiving manuals.
* Support Executive Design Reviews by contributing technical content, analysis, and coordination as requested by Project or Design Management.
What We Look For
* 10+ years of experience in mechanical engineering design, HVAC/DX/VRF/CHW applications, central plant development and operational guidance, hydraulics, hydronics, compressed air, overall kitchen designs and implementation.
* Ability to support project partners in procurement and construction.
* Experience with AutoCAD, Revit, ACC, and other engineering-based software.
* Working knowledge of both National and Local Standards and Codes.
Required Education and Licensure
* BS Mechanical Engineering or related field from an ABET accredited university.
* Current registration as a Professional Engineer in the State of California in good standing.
#DXMedia #DXFOS #LI-YW1
Additional Information
Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ( ) .
The hiring range for this position in Anaheim, CA is $126,800.00 to $154,800.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographical region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
You will act as the Staff Mechanical Engineering Owner's Representative with technical expertise for mechanical engineering issues, design management of in-house and outside resources, code compliance, Disney design standards, documentation, specifications, and life cycle cost analysis for best value. This role also involves close collaboration with other engineering disciplines and multiple Disney project teams including FAM, WDI, Entertainment, and Operations.
You will report to the Senior Manager for MEP Engineering with DLR Architecture & Facilities Engineering.
What You Will Do
* Act as Owner's Representative on projects from concept through construction at the Disneyland Resort. Project types will include shops, rides, hotels, shows, maintenance facilities, and nearly any built facility and area development found on our property.
* Manage the design and development of contract documents of projects with in-house and outside resources to meet project scopes, schedules and budgets.
* Develop concepts and Request for Proposals (RFP)s.
* Attend, participate, and problem solve during site visits from concept through construction.
* Review drawings and specifications and ensure that all projects are designed and executed to applicable codes and statutes
* Work with stakeholders to provide civil engineering resources to develop project scope including design, planning and code compliance for estimation and feasibility.
* Resolve design issues creatively and thoroughly coordinating design with other disciplines.
* Develop clear technical analyses and recommend frameworks to inform executive review and approval.
* Partner with internal teams to develop, maintain, communicate, and enforce Walt Disney Company design guidelines, standards, master specifications, and details.
* As the owner's representative, you'll review with a focus on constructability, efficiency, and long-term maintainability.
* Liaison with City officials and external agencies to ensure project scope and implementation is coordinated and compliant with external requirements.
* Research Record Drawings in Disneyland Archives.
* Perform field work to investigate and assess mechanical related infrastructure in the Resort.
* Independently review new and existing design drawings and calculations.
* Review shop drawing submittals and respond to vendor requests for information per Resort standards.
* Coordinate design activities and monitor field installations and demolition work that comply with specifications and code requirements.
* Perform reviews of existing infrastructure: propose upgrades and replacements, present findings and recommendations.
* Serve as Engineer of Record on assigned projects, including signing and sealing construction documents when required.
* Design with focus on constructability, efficiency, and long-term maintainability.
* Expedite the receipt of sample submittals required for final design approval.
* Participate in weekly design coordination meetings and prioritize items to minimize schedule impacts.
* Assist Project and Design Managers to resolve design compliance issues relating to Projects requirements. Validate that all Item Specifications are consistent with products installed before archiving manuals.
* Support Executive Design Reviews by contributing technical content, analysis, and coordination as requested by Project or Design Management.
What We Look For
* 10+ years of experience in mechanical engineering design, HVAC/DX/VRF/CHW applications, central plant development and operational guidance, hydraulics, hydronics, compressed air, overall kitchen designs and implementation.
* Ability to support project partners in procurement and construction.
* Experience with AutoCAD, Revit, ACC, and other engineering-based software.
* Working knowledge of both National and Local Standards and Codes.
Required Education and Licensure
* BS Mechanical Engineering or related field from an ABET accredited university.
* Current registration as a Professional Engineer in the State of California in good standing.
#DXMedia #DXFOS #LI-YW1
Additional Information
Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ( ) .
The hiring range for this position in Anaheim, CA is $126,800.00 to $154,800.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographical region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
Not Specified
P
Mechanical Assembly
Salary not disclosed
Primetals Technologies USA is a leading partner for engineering, plant construction and lifecycle services in the metal industry.
We provide innovative and practical solutions to support our customers with long-term sustainability goals and their increased competitiveness.
We believe the technical and economic know-how of our employees is the key success factor of our company.
At Primetals Technologies, you are encouraged to learn, grow, develop and contribute.
Come join the 7,000 employees worldwide working at Primetals Technologies, a Group Company of Mitsubishi Heavy Industries.
Based upon our business growth, we are looking to hire a Mechanical Assembly at our Warren, OH facility.
Classification and pay rate will be determined by skill level and experience.
Responsibilities: Performs mechanical assembly of large rotating equipment and major mechanicalsub‑assemblies.
Work includes structural components, machined parts, bearing systems, shafts, housings, fasteners, linkages, and other precision mechanical elements.
Requires strong knowledge of heavy‑equipment assembly practices including proper fits, clearances, bearing installation, torquing, alignment, lubrication, and preservation.
Uses hand tools, pneumatic and electric power tools, precision measuring instruments (dial indicators, micrometers, bore gauges, height gauges), and specialized fixturing/assembly equipment designed for large‑scale builds.
Works from detailed written instructions, engineering drawings, build packets, blueprints, and mechanical schematics.
Follows established assembly procedures, tolerances, and quality standards.
Proficient in interpreting mechanical assembly drawings, stack‑up dimensions, and alignment requirements.
Performs dimensional checks and records measurements to ensure components meet specification.
Operates cranes, forklifts, and other heavy material‑handling equipment to safely position and assemble large components.
Responsible for proper rigging and safe movement of heavy or irregularly shaped parts.
Performs additional mechanical or assembly duties as assigned by Management to support production schedules and operational requirements.
Education/Experience/Skills/Knowledge: High School or Equivalent Classification and pay rate will be determined by skill level and experience Crane/Forklift Certification – In-house training provided to obtain certifications Valid Driver’s license Proper use of Hand tools, power tools, cranes, micrometers and other precision measuring tools Proper use of Safety Equipment – Safety boots, hard hat, safety glasses, ear plugs Primetals Technologies offers a full range of benefits starting with first day of employment.
If you want to learn more about Primetals Technologies, visit our website! At Primetals Technologies, we value difference for the benefit of our Employees, our Customers and our Community.
Primetals Technologies is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or gender identity.
Req 6805
We provide innovative and practical solutions to support our customers with long-term sustainability goals and their increased competitiveness.
We believe the technical and economic know-how of our employees is the key success factor of our company.
At Primetals Technologies, you are encouraged to learn, grow, develop and contribute.
Come join the 7,000 employees worldwide working at Primetals Technologies, a Group Company of Mitsubishi Heavy Industries.
Based upon our business growth, we are looking to hire a Mechanical Assembly at our Warren, OH facility.
Classification and pay rate will be determined by skill level and experience.
Responsibilities: Performs mechanical assembly of large rotating equipment and major mechanicalsub‑assemblies.
Work includes structural components, machined parts, bearing systems, shafts, housings, fasteners, linkages, and other precision mechanical elements.
Requires strong knowledge of heavy‑equipment assembly practices including proper fits, clearances, bearing installation, torquing, alignment, lubrication, and preservation.
Uses hand tools, pneumatic and electric power tools, precision measuring instruments (dial indicators, micrometers, bore gauges, height gauges), and specialized fixturing/assembly equipment designed for large‑scale builds.
Works from detailed written instructions, engineering drawings, build packets, blueprints, and mechanical schematics.
Follows established assembly procedures, tolerances, and quality standards.
Proficient in interpreting mechanical assembly drawings, stack‑up dimensions, and alignment requirements.
Performs dimensional checks and records measurements to ensure components meet specification.
Operates cranes, forklifts, and other heavy material‑handling equipment to safely position and assemble large components.
Responsible for proper rigging and safe movement of heavy or irregularly shaped parts.
Performs additional mechanical or assembly duties as assigned by Management to support production schedules and operational requirements.
Education/Experience/Skills/Knowledge: High School or Equivalent Classification and pay rate will be determined by skill level and experience Crane/Forklift Certification – In-house training provided to obtain certifications Valid Driver’s license Proper use of Hand tools, power tools, cranes, micrometers and other precision measuring tools Proper use of Safety Equipment – Safety boots, hard hat, safety glasses, ear plugs Primetals Technologies offers a full range of benefits starting with first day of employment.
If you want to learn more about Primetals Technologies, visit our website! At Primetals Technologies, we value difference for the benefit of our Employees, our Customers and our Community.
Primetals Technologies is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or gender identity.
Req 6805
Not Specified
S
Electro-Mechanical Production Technician (Automation)
✦ New
Salary not disclosed
About Sepro America Sepro America is a global provider of industrial automation solutions, supporting manufacturers across a wide range of industries.
Our Warrendale facility builds custom automation systems in-house, from mechanical assembly through testing and commissioning.
This role is ideal for someone who enjoys hands-on work, problem-solving, and seeing a system come together from start to finish.
Role Overview The Electro-Mechanical Production Technician (Automation) supports the assembly, testing, and troubleshooting of industrial automation systems.
This role works closely with engineering and production teams and offers exposure to complete automation builds
- not just repetitive bench assembly.
The position is suitable for both early-career technicians looking to grow and experienced assemblers who want broader system-level involvement.
Key Responsibilities Assemble mechanical and electrical components and subassemblies using engineering drawings, schematics, and work instructions Use hand and power tools to align, adjust, and secure components accurately Support full system builds, including layout, assembly, and final integration Perform functional testing and inspections to verify proper operation Troubleshoot assembly and functionality issues and work with engineering to resolve them Document assembly and testing activities as required Collaborate with technicians, engineers, and project managers to meet project timelines Maintain a clean, safe, and organized work environment What We're Looking For High school diploma or equivalent required Technical training, certification, or hands-on mechanical/electrical experience preferred Entry-level candidates with strong mechanical aptitude and willingness to learn are encouraged to apply Experience reading and interpreting drawings and schematics is a plus Comfortable using hand and power tools in a production environment Strong attention to detail and problem-solving skills Ability to work independently while also contributing to a team environment Interest in learning automation systems, robotics, and system-level assembly Physical Requirements Ability to lift up to 50 lbs Ability to distinguish colors for wiring and component identification Growth & Development This role provides exposure to full automation system builds and opportunities to develop skills in mechanical assembly, electrical integration, testing, and troubleshooting.
Technicians who demonstrate strong performance and initiative may grow into advanced technician roles or specialized areas over time.
Compensation & Benefits Competitive compensation based on experience Paid vacation and company holidays Medical, dental, and vision insurance Short-term disability, long-term disability, and life insurance 401(k) retirement plan Sepro America, LLC is an equal opportunity employer and considers all qualified applicants without regard to race, color, religion, sex, age, disability, veteran status, or any other legally protected status.
Compensation details: 22-30 Hourly Wage PI15d3deb9976b-7098
Our Warrendale facility builds custom automation systems in-house, from mechanical assembly through testing and commissioning.
This role is ideal for someone who enjoys hands-on work, problem-solving, and seeing a system come together from start to finish.
Role Overview The Electro-Mechanical Production Technician (Automation) supports the assembly, testing, and troubleshooting of industrial automation systems.
This role works closely with engineering and production teams and offers exposure to complete automation builds
- not just repetitive bench assembly.
The position is suitable for both early-career technicians looking to grow and experienced assemblers who want broader system-level involvement.
Key Responsibilities Assemble mechanical and electrical components and subassemblies using engineering drawings, schematics, and work instructions Use hand and power tools to align, adjust, and secure components accurately Support full system builds, including layout, assembly, and final integration Perform functional testing and inspections to verify proper operation Troubleshoot assembly and functionality issues and work with engineering to resolve them Document assembly and testing activities as required Collaborate with technicians, engineers, and project managers to meet project timelines Maintain a clean, safe, and organized work environment What We're Looking For High school diploma or equivalent required Technical training, certification, or hands-on mechanical/electrical experience preferred Entry-level candidates with strong mechanical aptitude and willingness to learn are encouraged to apply Experience reading and interpreting drawings and schematics is a plus Comfortable using hand and power tools in a production environment Strong attention to detail and problem-solving skills Ability to work independently while also contributing to a team environment Interest in learning automation systems, robotics, and system-level assembly Physical Requirements Ability to lift up to 50 lbs Ability to distinguish colors for wiring and component identification Growth & Development This role provides exposure to full automation system builds and opportunities to develop skills in mechanical assembly, electrical integration, testing, and troubleshooting.
Technicians who demonstrate strong performance and initiative may grow into advanced technician roles or specialized areas over time.
Compensation & Benefits Competitive compensation based on experience Paid vacation and company holidays Medical, dental, and vision insurance Short-term disability, long-term disability, and life insurance 401(k) retirement plan Sepro America, LLC is an equal opportunity employer and considers all qualified applicants without regard to race, color, religion, sex, age, disability, veteran status, or any other legally protected status.
Compensation details: 22-30 Hourly Wage PI15d3deb9976b-7098
Not Specified
P
Senior Mechanical Design Engineer-HVAC
Salary not disclosed
Position Overview:
PTS Advance is seeking an experienced MEP Mechanical Design Engineer to join our growing team. The ideal candidate will have a strong background in mechanical building systems design and proven expertise in Revit for modeling and documentation. You’ll play a key role in developing HVAC, plumbing, and piping designs for commercial, industrial, and institutional projects.
Key Responsibilities:
- Design and develop mechanical systems for building projects, including HVAC, plumbing, and piping.
- Create and coordinate 3D models and detailed construction documents using Revit.
- Collaborate with multidisciplinary teams, including architects, electrical engineers, and contractors.
- Perform load calculations, equipment selection, and system layouts.
- Ensure designs meet applicable codes, standards, and client specifications.
- Support project lifecycle from concept through construction administration.
Qualifications:
- Bachelor’s degree in Mechanical Engineering or related field.
- 10+ years of experience in MEP mechanical design (commercial or industrial preferred).
- Proficiency in Revit required.
- Strong understanding of mechanical building codes and standards.
- Excellent communication and teamwork skills.
- Professional Engineer (PE) license is a plus.
Not Specified
jobs by
✓ All jobs loaded