Sagemcom Router Setup Jobs in Usa

• 
  
• Building complex assemblies by performing the layout, fit-up, assembly and welding operations.
  
• Certify to multiple weld specifications as required for different materials and weld processes.
  
• Reading and interpreting blueprints, sketches, drawings, routing instructions, manuals, specifications and procedures to determine dimensions and tolerances of finished weldment.
  
• Measuring, marking and scribing dimensions and reference points on material or work pieces as guides for subsequent machining or fabrication operations as required by router instructions and good shop practice.
  
• Using precision measurement instruments.
  
• Operating hand tools and other shop equipment such as grinders, positioners, turn rolls.
  
• Perform material handling of large weldments using overhead cranes, using proper lifting techniques with high degree of attention to safety.
  
• May operate fork truck, with certification requirements
  
• Ensure proper data entry of inspection and other information into computer system.
  
• Monitor and maintain proper cleanliness and function of equipment and work area on a daily basis.
  

• 
  
• A minimum of two years of trade school or vocational education or appropriate work experience in welding
  
• General welding knowledge, shop math, precision measuring instruments, blueprint reading and welding symbols
  
• Must have MIG and TIG welding experience; physical weld test will be required in selection process to meet minimum criteria for qualification.
  
• Material familiarity with carbon and stainless steel, nickel-based alloys and aluminum
  
• Robotic welding/programming a plus
  

• 
  
• Present a positive attitude
  
• Be able to work well with meeting deadlines
  
• Have a good work ethic and attendance
  
• Have the ability to communicate well with peers, engineers and leadership
  

Plans and coordinates the pre-press department workflow in a manner which will consistently meet customer requirements and meet team and corporate profit goals. Provides leadership to all screen and digital pre-press production art personnel. Participates with Sales department on new design requests. Continually effects improvement in quality, methods and productivity by identifying waste and eliminating it. Provides technical knowledge and assistance to all areas.

DUTIES

Oversees daily screen and digital pre-press production art activities including file preparation, color management and proofing to ensure efficiency and quality standards are met.

• Schedules and monitors the daily pre-press production art workflow to ensure timely and efficient production.
• Controls and monitors processes; ensures in-process inspections are conducted.
• Works with sales, customer service and production teams to pre-plan orders, determine optimum processing methods, resolve artwork issues and clarify specifications.
• Oversees color management programs for screen and digital printing processes.
• Communicates with internal staff and customers as needed to provide technical assistance.
• Ensures a system for maintaining art files and archives.

Meets with and collaborates with Sales on new design requests.

• Determines scope of project.
• Recommends proper materials for project.
• Reviews nesting and various size elements.
• Assists Estimating with pricing.
• Provides technical guidance on structural elements of point-of-purchase (POP) displays.
• Collaborates with outside creative design personnel.

Management responsibilities.

• Conducts area meetings on a regular basis.
• Evaluates direct staff via the performance review process.
• Equitably interprets and enforces company policy within the area.
• Identifies, recommends and coordinates with manager and Human Resources, all decisions regarding hiring, training, evaluating, promoting and disciplining of associates consistent with corporate policies.
• Ensures training and cross training of staff.
• Keeps manager informed of problems adversely affecting the team; makes recommendations for corrective action.
• Ensures all safety practices and procedures are followed; provides appropriate training and equipment.

Responsible for quality improvement process.

• Develops process operator instructions and work instructions and conducts periodic audits of same.
• Ensures compliance with quality procedures including Blaze and First Article Inspections.
• Ensures timely response to formal and informal corrective action through the immediate use of problem solving tools to prevent reoccurrence.

Performs other duties as assigned or apparent.

KNOWLEDGE, SKILLS AND ABILITIES

• Thorough knowledge of screen and digital printing processes.
• Thorough knowledge of print and color theory, and appropriate methods to produce required art and digital files.
• Thorough knowledge of various pre-press software and technologies such as Mac software, and Adobe Creative Suite.
• Thorough knowledge of pre-press operations and printing processes, including file preparation, color correction, and proofing techniques.
• Considerable knowledge of structural point-of-purchase (POP) design elements.
• Working knowledge of electronic cutting equipment, methods and processes (i.e. Zund, Kongsberg, Routers, Plotters.)
• Considerable ability to identify, analyze and resolve production-related problems including troubleshooting file issues and quickly resolving technical challenges.
• Considerable ability to lead departmental staff, provide performance feedback and technical guidance.
• Considerable ability to deal tactfully and effectively with associates, vendors and customers, while supporting company policies.
• Considerable verbal and written communication skills.
• Considerable ability to work in a high-pressure, demanding work environment.
• Considerable ability to stay abreast of technological advances and trends in the printing industry.

MINIMUM QUALIFICATIONS

• Bachelor’s degree from four-year college or university with emphasis on commercial art, or computer graphic design.
• Five years of screen printing and/or digital imaging pre-press experience.
• Two years of Pre-Press management experience.
• Must not be color blind.

Mayzon is a manufacturing company that specializes in the design and marketing of bath and home fashion products, including shower curtains, bath furniture, and storage solutions. Mayzon was founded in 1929 and is headquartered in New York City. The company operates through brands like Zenna Home and private label partnerships, selling products to various retailers, including home decor/improvement stores, department stores, supermarkets, and online platforms. In 2022, Mayzon was formed by merging Maytex, Zenith Home Products, and Decolin.

Position Summary

The Wood Processing Supervisor is responsible for leading daily operations within Mayzon’s wood fabrication and finishing department. This role oversees production performance, safety compliance, quality standards, and team leadership for wood components used in bath furniture, storage, and home organization products. The position drives operational efficiency, cost control, and continuous improvement within a fast-paced manufacturing environment.

Essential Duties & Responsibilities

Production Leadership

• Direct and supervise daily wood processing operations including cutting, routing, CNC machining, sanding, drilling, shaping, assembly, and finishing.
• Ensure production schedules are achieved while meeting quality and cost targets.
• Monitor KPIs such as throughput, scrap rate, rework, labor efficiency, and equipment utilization.
• Allocate labor resources and adjust workflow to maintain optimal production flow.

Team Management

• Lead, coach, and develop production associates within the wood shop.
• Enforce OSHA and plant safety standards, ensuring proper PPE usage and compliance.
• Conduct performance evaluations, training initiatives, and progressive discipline as needed.
• Promote cross-training and workforce flexibility.

Quality & Process Control

• Ensure wood components meet dimensional tolerances, fit/finish specifications, and durability standards.
• Partner with Quality and Engineering to resolve non-conformances and implement corrective actions.
• Oversee stain, paint, laminate, and coating processes to maintain consistency and product integrity.
• Maintain process documentation and standardized work instructions.

Equipment & Maintenance Coordination

• Coordinate preventive maintenance for CNC routers, panel saws, edge banders, and finishing equipment.
• Troubleshoot production or mechanical issues in real time.
• Collaborate with Maintenance to improve uptime and reduce downtime events.

Continuous Improvement

• Drive lean manufacturing initiatives to reduce waste and improve material yield.
• Identify cost-reduction opportunities in wood utilization, cycle time, and labor deployment.
• Support sustainable manufacturing efforts including scrap reduction and efficient material handling.

Qualifications

• Associate’s or Bachelor’s degree in Manufacturing, Industrial Technology, Wood Science, or related field preferred.
• 5+ years of experience in wood processing, cabinetry, furniture manufacturing, or similar production environment.
• Minimum 2 years of supervisory experience in manufacturing.
• Strong knowledge of hardwoods, MDF, particle board, laminates, and finishing systems.
• Experience operating or supervising CNC woodworking equipment.
• Working knowledge of lean manufacturing principles and production scheduling systems.

Key Competencies

• Leadership and team development
• Production planning and operational discipline
• Data-driven performance management
• Strong problem-solving ability
• Focus on quality, safety, and efficiency

Work Environment

Manufacturing environment with exposure to woodworking machinery, dust, finishing materials, and industrial noise. PPE required.

Equal Employment Opportunity

Mayzon is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic in accordance with applicable laws.

• Maintain and improve the Quality Management System (ISO 13485 & AS9100)
• Own document control: procedures, forms, records, revision history, approvals, and training linkage
• Write and maintain SOPs and Work Instructions (WI) that are usable on the shop floor
• Build/maintain templates and “quality infrastructure” (CAPA, NCR, MRB, supplier scorecards, audit checklists, etc.) so quality work is repeatable and fast
  
  

• Maintain and execute quality control plans and inspection procedures (incoming, in-process, final)
• Review and approve production travelers/routers, inspection reports, and batch records for completeness and compliance
• Support measurement and inspection activity as needed (hands-on), including working with GD&T intent and drawing requirements
• Own calibration control and measurement system discipline (gage control, basic MSA/Gage R&R where appropriate)
  
  

• Lead nonconformance containment, disposition (MRB), and corrective/preventive action
• Drive root cause analysis using structured methods (5-Why, fishbone, etc.)
• Use data (scrap, rework, yield, escapes, supplier defects) to prioritize improvements and prevent recurrence
• Audits, suppliers, and external requirements
• Plan and lead internal audits; coordinate/support customer and certification audits
• Own supplier quality activities: supplier evaluations, incoming inspection strategy, supplier corrective actions, and performance tracking
• Partner with engineering and operations to ensure purchasing controls and material traceability meet customer and regulatory requirements
  
  

• Lead/coordinate validation activities such as IQ/OQ/PQ and process/product qualification, ensuring documentation traceability and clear acceptance criteria
• Support transition from development work into repeatable production (control plans, risk reviews, inspection plans, recordkeeping)
  
  

• Collaborate daily with production, engineering, and program leadership to solve problems and improve execution
• Various other tasks as required in a small business
  
  

• Engineering degree preferred or equivalent industry experience
• 7+ years in manufacturing quality engineering with direct responsibility for process performance improvement
• Demonstrated track record of reducing defect rates, scrap, or variation through statistical and engineering-based methods
• Advanced root cause analysis experience involving complex, multi-variable manufacturing processes
• Proficiency in statistical tools (SPC, DOE, regression analysis, Cp/Cpk analysis) with hands-on software experience (Minitab, JMP, or equivalent)
• Experience implementing sustainable corrective actions that changed process capability (not temporary containment measures)
• Prior experience working in a regulated/certified quality system (ISO 13485 and/or AS9100 experience strongly preferred)
• Demonstrated ability to create and maintain clear procedures, records, and traceability
• Adeptness to operate hands-on in a production environment and communicate effectively with engineers and technicians
• This position requires access to controlled information under U.S. export control laws. Therefore, applicants must be U.S. persons (U.S. citizen or lawful permanent resident)
• Submittal of a cover letter describing why you are interested in working at Voxel and our mission
  
  

Job Title: 3D Printing Technician

Location: Mossville, IL

Contract duration: 12 month contract with potential for extension or conversion

Job Summary

We are seeking a hands-on 3D Printing Technician to support daily production across SLS, SLA, LPBF, FDM, and DLS platforms. This role offers technical variety, daily problem-solving, and the opportunity to directly influence part quality, repeatability, and throughput in a dynamic, safety-focused engineering environment. You will work side-by-side with our engineering team to interpret build intent, execute precise machine turnovers, drive reliable post-processing, and continuously improve processes and workflow.

Position’s Contributions to Work Group:

• Prepare, start, and monitor additive manufacturing builds across multiple technologies. (e.g., SLS, LPBF, FDM, SLA, and DLS)
• Post process/finish parts and perform visual inspections against drawings/routers; identify common defects and document findings
• Package parts per site standards; protect, label, and hand off to shipping.
• Perform basic maintenance on equipment and escalate as needed.
• Maintain 5S; manage materials with correct labeling and storage.
• Communicate status/risks early; collaborate with engineers on root cause & prevention.

Qualifications:

Preferred

• Manufacturing or additive experience (professional or maker/hobbyist).
• Finishing/body work.
• Post processing/assembly

Physical Requirements

• Stand/sit for extended periods; perform repetitive operations.
• Lift up to 35 lbs.
• Close visual acuity for small parts/defects.

Education & Experience Required:

• Years of experience: 3-5 years – not necessarily relevant experience; any work exp
• Degree requirement: High School Diploma
• Do you accept internships as job experience: Yes
• Are there past or additional job titles or roles that would provide comparable background to this role: Any Technician role

Top 3 Skills

• Detail Oriented
• Time Management
• Mechanical Aptitude

Additional Technical Skills

(Desired)

• Familiar with Microsoft office suite

Soft Skills

(Desired)

• Any experience with assembly or finishing

Screening questions:

Do you now or in the future require sponsorship (e.g. H-1B)? Y/N

EEO and ADA Statement:

Consulting Solutions and its family of companies is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

If you are a person with a disability needing assistance with the application or at any point in the hiring process, please contact us at:

The ideal candidate will be responsible for executing and leading the full design process from ideation to production. You will draw new designs and update our current designs. During the creation process, you will ensure that our designs meeting all necessary design responsibilities.

DUTIES AND RESPONSIBILITIES:

• Design and develop new products to bring to market
• Create 3D model content
• Produce and maintain production drawings
• Assist with creation of operations manuals
• Set up part numbers, bill of material and shop floor routers as required
• Implement and review procedures and equipment involved in the manufacturing process
• Provide management with data and statistics to enable management to understand future requirements needed for the manufacturing process
• Evaluate quality control processes and make recommendations for improvements in quality control
• Meet or exceed department productivity goals as set by management
• Maintain professional and technical knowledge required to perform all job functions
• Maintain safe and clean work environment
• Maintain compliance with established policies and procedures by educating and directing employees on the use of equipment and resources
• Communicate with other employees and departments about work related processes
• Update information in Global Shop as necessary
• Perform additional related duties as required

EDUCATION/EXPERIENCE:

• Mechanical Engineering or Design degree (AS/BS) preferred
• Previous experience in a Product Design role a plus
• Experience prioritizing workload
• Solidworks/AutoCAD experience

PHYSICAL REQUIREMENTS/WORK ENVIRONMENT:

• Ability to lift 50 lbs. occasionally
• Ability to work in a manufacturing environment
• Constant standing and walking
• Frequent bending and stooping
• Clean work environment
• Safety training and other required PPE provided
• Must submit to pre-employment drug screening and criminal background check

Job Title: Quality Assurance & Compliance Manager (Aerospace / Precision Machining)

Department: Quality

Reports To: General Manager / Director of Operations

Location: Southampton, MA

FLSA Status: Exempt

Position Summary

Responsible for leading the Quality Management System (QMS) and ensuring compliance with aerospace, defense, and customer requirements. Oversees ISO 9001 / AS9100 certifications, audits, inspection processes, documentation, and traceability within a precision machining or aerospace manufacturing environment.

Key Responsibilities

• QMS & Continuous Improvement
• Manage and improve the QMS in compliance with ISO 9001 and AS9100.
• Maintain procedures, work instructions, and document control.
• Lead CAPA, root cause analysis, and continuous improvement initiatives.
• Track and report quality performance metrics.

Certification & Compliance

• Maintain ISO 9001 / AS9100 certifications and audit readiness.
• Coordinate third-party and customer audits.
• Ensure compliance with customer flow-downs and contract requirements.
• Monitor and implement regulatory/standards updates.
• Aerospace & Defense Quality
• Ensure compliance with AS9102 FAIRs, traceability, and special process controls.
• Support ITAR/EAR and DFARS requirements as applicable.
• Maintain material, process, and certification records.
• Coordinate with NADCAP-approved suppliers.

Inspection & Production Support

• Oversee inspections to drawings, GD&T, and specifications.
• Manage calibration of inspection equipment.
• Control travelers/routers and in-process/final inspection records.
• Support production in resolving nonconformances.

Audits & Supplier Quality

• Conduct internal audits and manage corrective actions.
• Support supplier qualification, monitoring, and audits.
• Ensure timely closure of audit findings.

Customer Quality

• Interface with customers on quality issues and audits.
• Manage portal submissions and reporting.
• Oversee FAIRs, PPAPs, and required documentation.

Training & Leadership

Train staff on quality and compliance procedures.

Promote a culture of quality and traceability.

Advise production, engineering, and purchasing on requirements.

Qualifications

Required

• Bachelor’s degree in Quality, Engineering, Manufacturing, or related field (or equivalent experience).
• 5+ years in aerospace, defense, or precision machining quality.
• Experience with ISO 9001 / AS9100 systems.
• Proficiency in GD&T, blueprint reading, audits, and root cause analysis.

Preferred

• CQE, CQA, or ASQ certification.
• CNC machining / precision manufacturing experience.
• ERP / QMS system familiarity (Epicor a plus).
• Experience with aerospace primes or Tier suppliers.

Skills & Competencies

• Analytical problem-solving.
• Strong documentation and organization.
• Effective auditor/customer communication.
• Detail-oriented with regulatory focus.
• Ability to manage multiple priorities.

Work Environment & Metrics

• Office and shop-floor presence.
• Interaction with production, suppliers, and customers.
• Occasional audit/customer travel.

Success Measured By:

• Certification maintenance.
• Audit results and corrective action closure.
• Reduced nonconformances.
• On-time FAIRs and documentation.
• Supplier and customer quality performance.

The Director of Manufacturing will lead the production, planning, quality inspection and inventory control teams and work with the test and engineering teams for successful LRIP (Low-Rate Initial Production) of our Subsurface Compressor Systems; perform cost reduction; improve productivity, ensure quality builds; and ensure deliveries are made on time.

Essential Duties and Responsibilities:

1. Lead and direct the manufacturing team to meet delivery commitments.
2. Develop and maintain the Master Production Schedule; identify risks and take mitigating actions to address them preemptively.
3. Ensure production builds meet delivery, design, quality and forecasted budget.
4. Drive the S&OP forecasting process based on sales outlook, fleet support and internal usage.
5. Maintain spare part requirements for the operating fleet including R&D. Drive the S&OP process through purchase approvals.
6. Institute plans to improve productivity, reduce build costs and execute high quality builds. Continue to implement KPIs for these and define and track performance metrics, including OTTR and forecast accuracy.
7. Initiate NCR and follow through to closure to correct and prevent re-occurrence of manufacturing issues.
8. Verify quality traceability in the production management systems per ISO 9001
9. Ensure build procedures are consistently followed and operators are trained.
10. Build hardware failure contingency plans for production work and field support to reduce delivery risk and lead times
11. Implement 5S, including a special focus on safety assessment and PPE.
12. Assist in dispositioning discrepant material and ensuring engineering intent is met in the manufacturing process.
13. Contribute to and comply with ISO9001.

Skills, Experience, Education, and Abilities:

• BS degree in a technical field (Manufacturing, Industrial or Mechanical Engineering preferred) or equivalent combination of education/experience.
• A minimum of 7 years progressive and related experience required.
• Demonstrated ability to support hands-on decision making, management, mentoring and development of technicians and engineers in a highly collaborative environment.
• Ability to read prints and familiar with interpretation of GD&T call outs.
• Strong understanding of geometric tolerancing per ASME Y14.5, dimensional stack-ups, inspection procedures and metrology equipment.
• Experience building turbomachinery, which includes high-speed rotating equipment, electric motors, compressors and oil management systems.
• Familiar with creating ERP system BOM’s & Routers; experience with Global Shop is a plus.
• Knowledge of standard manufacturing processes for complex, precision turbo machinery: casting, machining, milling, grinding, rotor balancing, mechanical and electrical assembly, inspection techniques, oil management systems (tubing, fittings, etc.) and pressurized assemblies.
• Experience with NPI of complex equipment.
• Kaizen, 5S, Six Sigma, Demand Flow Technology, Lean Manufacturing, ISO 9001 experience is a plus.
• Experience configuring assembly lines, in-process Kanban’s and visual work instructions is a plus.
• Good interpersonal and interfacing skills (i.e. communicating well with people across different departments both internally and externally)
• Additional computer skills: Microsoft Office Suite

Intangibles Sought:

• Able to exercise independent judgment and make decisions on technical issues.
• Ability to establish positive rapport with individuals at all levels of organization.
• Ability to motivate working team through leadership and “can do” attitude.
• Self-awareness; not afraid to ask for help or admit error.
• Willingness to engage in constructive debate.
• Ownership, initiative and accountability.
• Flexibility in range of responsibilities.

Supervisory Responsibilities:

Position will lead the manufacturing team. Position will be responsible for directing and coordinating activities of others to meet company objectives.

Physical Demands / Work Environment:

Time will be split between office and shop floor. Personal protective equipment, such as safety glasses, gloves, or masks may be required in some assembly areas. Some travel will be required as needed for vendor visits/qualifications.

Company Description

C-B Gear & Machine, Inc. has been delivering high-quality gear systems and services at competitive prices since 1952. With in-house engineers, the company specializes in new gear design, reverse engineering, custom turnkey projects, and precision bevel gears. Their gearbox repair team brings decades of experience in reconditioning, repairing, and rebuilding various gearboxes. As a recognized “heavy-duty” gear producer, C-B Gear serves industrial markets such as petrochemical, refining, oil & gas, power, asphalt, cement, pulp & paper, and steel. Operating out of Houston, TX, the company proudly serves clients both nationwide and internationally.

Key Responsibilities

Sales, Quoting & Customer Support

• Prepare and issue quotations for gear manufacturing, gearbox repair, and related machining services.

• Respond to customer inquiries regarding gear manufacturing, gearbox repair, and machining capabilities.

• Communicate pricing, lead times, and scope of work to customers.

• Follow up on quotations to secure orders and maintain customer relationships.

• Coordinate with customers regarding project requirements, schedules, and technical questions.

• Maintain ongoing relationships with customers and support repeat business.

⸻

Technical Review

• Review customer drawings, specifications, and gearbox assemblies to determine scope of work.

• Advise customers on manufacturability and repair options.

• Assist customers in identifying replacement gears or gearbox repair solutions.

• Evaluate gearbox failures and recommend repair approaches when required.

⸻

Estimating & Job Planning

• Develop manufacturing routers and job travelers for production.

• Determine machining processes required (turning, hobbing, shaping, grinding, heat treat, etc.).

• Estimate labor hours, materials, and subcontract services.

• Work with engineering and production to confirm manufacturing feasibility.

⸻

Documentation & Reporting

• Prepare gearbox inspection and failure analysis reports when required.

• Maintain records of quotes, job specifications, and technical communications.

• Ensure proper documentation is available for production and quality control.

⸻

Required Skills

• Strong understanding of gear manufacturing and gearbox repair

• Ability to read and interpret engineering drawings

• Experience preparing manufacturing quotes and estimates

• Knowledge of machining processes and gear terminology

• Strong customer communication and sales skills

• Ability to translate technical requirements into manufacturing scope.

Manufacturing & Design Engineer

Build complex systems from concept to production and actually see them come to life.

This is a hands-on engineering role where you’ll take ownership of real manufacturing challenges, drive design decisions, and help bring highly engineered products into production. If you enjoy bridging design, fabrication, and operations, this is the kind of role where you’ll make a visible impact.

Job Summary

The Manufacturing & Design Engineer leads the design and execution of complex engineering projects within a fast-paced manufacturing environment. This role works cross-functionally with engineering, operations, and commercial teams to deliver high-quality products on time and within budget. You’ll be involved from concept through production, owning design, improving manufacturability, and helping streamline processes through automation and continuous improvement.

Key Responsibilities

• Collaborate with internal and external stakeholders to define products and create detailed drawings to support machining, fabrication, and assembly
• Set up routers, Bills of Materials (BOMs), and item data within ERP systems for new projects
• Interface cross-functionally to define requirements, align priorities, and manage project scope
• Partner with sales to develop cost estimates and routing times for new projects
• Support manufacturing through tooling, fixturing, and automation including robotic and orbital welding
• Drive process improvements across fabrication, welding, and polishing operations
• Develop and manage project plans, Gantt charts, dashboards, and tracking tools
• Identify risks and implement solutions to keep projects on track

What They’re Looking For

• Strong background in mechanical and/or manufacturing engineering within an industrial environment
• Experience designing for manufacturability in fabrication, welding, or machining environments
• Hands-on mindset with the ability to work closely with production teams
• Proficiency with 2D and 3D CAD (Autodesk or similar)
• Experience working with ERP systems, BOMs, and routing structures
• Ability to manage multiple priorities in a fast-paced setting

Qualifications

• BS degree in Mechanical Engineering, Manufacturing Engineering, or related field, or equivalent experience
• 5–10 years of relevant engineering experience
• Exposure to Lean Manufacturing, Six Sigma, or continuous improvement methodologies is a plus

Why This Role Stands Out

• High visibility role with direct impact on production and product delivery
• Strong mix of design and hands-on manufacturing engineering
• Opportunity to drive automation and process improvements
• Collaborative environment where engineering plays a key role