Rynox Riding Jacket Jobs in Usa
3,267 positions found
Ride Operators ensure our guests have a fun and safe experience on our wide-variety of Rides.
Responsibilities:Essential Duties and Responsibilities:
- Attend required Human Resources Discovery, Rides Department training, and specific ride training.
- Adhere to Six Flags Standards of Appearance and Attendance policy as stated in the Six Flags Handbook.
- Provide courteous greetings and answer any Guest questions. Respond to and resolve Guest comments whenever possible.
- Ensure Guest safety and satisfaction during their visit.
- Enforce all rider restrictions including monitoring and measuring for height requirements.
- Assist with pairing up of single riders and proper grouping techniques to ensure greater capacity.
- Take hourly throughput readings.
- Respond to any emergency situation in the area and maintain control until a Supervisor arrives.
- Monitor and enforce Park line jumping and smoking policies.
- Clean ride units and ride areas as needed, including Guest Illnesses.
- Assist with downtime situations and evacuation, if a ride cannot be restarted.
- Be able to communicate proper hand signals as called for during ride operation.
- Watch ride and waiting Guests during the ride cycle.
- Physically check restraints.
- Assist Guests as they exit the ride.
- Manually open restraints when necessary.
- Operate the secondary control panel and visually monitor ride during operation and be prepared to stop the ride during critical situations.
- Validates Fast Lane wristbands at assigned rides and manage merge points to ensure guests are loaded onto the ride in a safe and timely manner.
- Successfully complete the International Ride Operator Certification (iROC) course through General Rides Training.
- Complete ride certification tests, corrected to 100% proficiency.
- Complete Witness Statements as needed.
- Stand at the control panel of the ride and run the ride by pressing appropriate buttons, visually monitoring control panel for flashing lights/solid lights, and be prepared to stop the ride during critical situations.
- Give announcements via a public address system when necessary.
- When assigned by a Rides Unit or Section Supervisor - perform test rides to ensure continued safety.
- Report any unsafe acts to your Unit or Section Supervisor
- Maintaining all aspects of ride area cleanliness by lining all trash cans with bags, emptying when full, wiping and re-bagging trash cans and carrying a pan and broom to sweep leaves, trash and debris
Qualifications:Skills and Qualifications:
- Minimum Age: 16
- Must have flexible availability including weekends, weeknights, and holidays
- Able to work efficiently in a fast-paced environment
- Able to communicate effectively in the English language, including the ability to read, speak and understand the English language.
- Must be able to stand/walk for up to 5 hours at a time and as many as 16 hours a day.
- Must be able to walk up to 5 miles per day over various surfaces.
- Capable of holding a handheld scanner (Approximate weight is 2.5 pounds), with both hands, for a minimum of 6 continuous hours.
- May be exposed to: heights, spinning objects or moving water.
- Must be willing to work outdoors in various weather conditions
- Must be professional, self-motivated, the ability to multi-task and have an enthusiastic attitude
- Must have strong teamwork skills and the ability to work with others
Ride Operators ensure our guests have a fun and safe experience on our wide-variety of Rides.
Responsibilities:Essential Duties and Responsibilities:
- Attend required Human Resources Discovery, Rides Department training, and specific ride training.
- Adhere to Six Flags Standards of Appearance and Attendance policy as stated in the Six Flags Handbook.
- Provide courteous greetings and answer any Guest questions. Respond to and resolve Guest comments whenever possible.
- Ensure Guest safety and satisfaction during their visit.
- Enforce all rider restrictions including monitoring and measuring for height requirements.
- Assist with pairing up of single riders and proper grouping techniques to ensure greater capacity.
- Take hourly throughput readings.
- Respond to any emergency situation in the area and maintain control until a Supervisor arrives.
- Monitor and enforce Park line jumping and smoking policies.
- Clean ride units and ride areas as needed, including Guest Illnesses.
- Assist with downtime situations and evacuation, if a ride cannot be restarted.
- Be able to communicate proper hand signals as called for during ride operation.
- Watch ride and waiting Guests during the ride cycle.
- Physically check restraints.
- Assist Guests as they exit the ride.
- Manually open restraints when necessary.
- Operate the secondary control panel and visually monitor ride during operation and be prepared to stop the ride during critical situations.
- Validates Fast Lane wristbands at assigned rides and manage merge points to ensure guests are loaded onto the ride in a safe and timely manner.
- Successfully complete the International Ride Operator Certification (iROC) course through General Rides Training.
- Complete ride certification tests, corrected to 100% proficiency.
- Complete Witness Statements as needed.
- Stand at the control panel of the ride and run the ride by pressing appropriate buttons, visually monitoring control panel for flashing lights/solid lights, and be prepared to stop the ride during critical situations.
- Give announcements via a public address system when necessary.
- When assigned by a Rides Unit or Section Supervisor - perform test rides to ensure continued safety.
- Report any unsafe acts to your Unit or Section Supervisor
- Maintaining all aspects of ride area cleanliness by lining all trash cans with bags, emptying when full, wiping and re-bagging trash cans and carrying a pan and broom to sweep leaves, trash and debris
Qualifications:Skills and Qualifications:
- Minimum Age: 16
- Must have flexible availability including weekends, weeknights, and holidays
- Able to work efficiently in a fast-paced environment
- Able to communicate effectively in the English language, including the ability to read, speak and understand the English language.
- Must be able to stand/walk for up to 5 hours at a time and as many as 16 hours a day.
- Must be able to walk up to 5 miles per day over various surfaces.
- Capable of holding a handheld scanner (Approximate weight is 2.5 pounds), with both hands, for a minimum of 6 continuous hours.
- May be exposed to: heights, spinning objects or moving water.
- Must be willing to work outdoors in various weather conditions
- Must be professional, self-motivated, the ability to multi-task and have an enthusiastic attitude
- Must have strong teamwork skills and the ability to work with others
Ride Operators ensure our guests have a fun and safe experience on our wide-variety of Rides.
Responsibilities:Essential Duties and Responsibilities:
- Attend required Human Resources Discovery, Rides Department training, and specific ride training.
- Adhere to Six Flags Standards of Appearance and Attendance policy as stated in the Six Flags Handbook.
- Provide courteous greetings and answer any Guest questions. Respond to and resolve Guest comments whenever possible.
- Ensure Guest safety and satisfaction during their visit.
- Enforce all rider restrictions including monitoring and measuring for height requirements.
- Assist with pairing up of single riders and proper grouping techniques to ensure greater capacity.
- Take hourly throughput readings.
- Respond to any emergency situation in the area and maintain control until a Supervisor arrives.
- Monitor and enforce Park line jumping and smoking policies.
- Clean ride units and ride areas as needed, including Guest Illnesses.
- Assist with downtime situations and evacuation, if a ride cannot be restarted.
- Be able to communicate proper hand signals as called for during ride operation.
- Watch ride and waiting Guests during the ride cycle.
- Physically check restraints.
- Assist Guests as they exit the ride.
- Manually open restraints when necessary.
- Operate the secondary control panel and visually monitor ride during operation and be prepared to stop the ride during critical situations.
- Validates Fast Lane wristbands at assigned rides and manage merge points to ensure guests are loaded onto the ride in a safe and timely manner.
- Successfully complete the International Ride Operator Certification (iROC) course through General Rides Training.
- Complete ride certification tests, corrected to 100% proficiency.
- Complete Witness Statements as needed.
- Stand at the control panel of the ride and run the ride by pressing appropriate buttons, visually monitoring control panel for flashing lights/solid lights, and be prepared to stop the ride during critical situations.
- Give announcements via a public address system when necessary.
- When assigned by a Rides Unit or Section Supervisor - perform test rides to ensure continued safety.
- Report any unsafe acts to your Unit or Section Supervisor
- Maintaining all aspects of ride area cleanliness by lining all trash cans with bags, emptying when full, wiping and re-bagging trash cans and carrying a pan and broom to sweep leaves, trash and debris
Qualifications:Skills and Qualifications:
- Minimum Age: 16
- Must have flexible availability including weekends, weeknights, and holidays
- Able to work efficiently in a fast-paced environment
- Able to communicate effectively in the English language, including the ability to read, speak and understand the English language.
- Must be able to stand/walk for up to 5 hours at a time and as many as 16 hours a day.
- Must be able to walk up to 5 miles per day over various surfaces.
- Capable of holding a handheld scanner (Approximate weight is 2.5 pounds), with both hands, for a minimum of 6 continuous hours.
- May be exposed to: heights, spinning objects or moving water.
- Must be willing to work outdoors in various weather conditions
- Must be professional, self-motivated, the ability to multi-task and have an enthusiastic attitude
- Must have strong teamwork skills and the ability to work with others
Ride Operators ensure our guests have a fun and safe experience on our wide-variety of Rides.
Responsibilities:Essential Duties and Responsibilities:
- Attend required Human Resources Discovery, Rides Department training, and specific ride training.
- Adhere to Six Flags Standards of Appearance and Attendance policy as stated in the Six Flags Handbook.
- Provide courteous greetings and answer any Guest questions. Respond to and resolve Guest comments whenever possible.
- Ensure Guest safety and satisfaction during their visit.
- Enforce all rider restrictions including monitoring and measuring for height requirements.
- Assist with pairing up of single riders and proper grouping techniques to ensure greater capacity.
- Take hourly throughput readings.
- Respond to any emergency situation in the area and maintain control until a Supervisor arrives.
- Monitor and enforce Park line jumping and smoking policies.
- Clean ride units and ride areas as needed, including Guest Illnesses.
- Assist with downtime situations and evacuation, if a ride cannot be restarted.
- Be able to communicate proper hand signals as called for during ride operation.
- Watch ride and waiting Guests during the ride cycle.
- Physically check restraints.
- Assist Guests as they exit the ride.
- Manually open restraints when necessary.
- Operate the secondary control panel and visually monitor ride during operation and be prepared to stop the ride during critical situations.
- Validates Fast Lane wristbands at assigned rides and manage merge points to ensure guests are loaded onto the ride in a safe and timely manner.
- Successfully complete the International Ride Operator Certification (iROC) course through General Rides Training.
- Complete ride certification tests, corrected to 100% proficiency.
- Complete Witness Statements as needed.
- Stand at the control panel of the ride and run the ride by pressing appropriate buttons, visually monitoring control panel for flashing lights/solid lights, and be prepared to stop the ride during critical situations.
- Give announcements via a public address system when necessary.
- When assigned by a Rides Unit or Section Supervisor - perform test rides to ensure continued safety.
- Report any unsafe acts to your Unit or Section Supervisor
- Maintaining all aspects of ride area cleanliness by lining all trash cans with bags, emptying when full, wiping and re-bagging trash cans and carrying a pan and broom to sweep leaves, trash and debris
Qualifications:Skills and Qualifications:
- Minimum Age: 16
- Must have flexible availability including weekends, weeknights, and holidays
- Able to work efficiently in a fast-paced environment
- Able to communicate effectively in the English language, including the ability to read, speak and understand the English language.
- Must be able to stand/walk for up to 5 hours at a time and as many as 16 hours a day.
- Must be able to walk up to 5 miles per day over various surfaces.
- Capable of holding a handheld scanner (Approximate weight is 2.5 pounds), with both hands, for a minimum of 6 continuous hours.
- May be exposed to: heights, spinning objects or moving water.
- Must be willing to work outdoors in various weather conditions
- Must be professional, self-motivated, the ability to multi-task and have an enthusiastic attitude
- Must have strong teamwork skills and the ability to work with others
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
Ride Control Software Engineers work within Imagineering's Ride Engineering Studio in a highly collaborative environment on diverse teams. Engineering activities cover all aspects of ride control software design and implementation, from concept to commissioning, for a wide variety of innovative ride platforms.
The role of Ride Control Software Engineer Principal (Design Assurance) focuses on design, analysis, system safety, and verification across multiple projects, supporting project teams in critical engineering quality activities.
This role will report to the Executive, Ride Controls Software Engineering.
This position is located in Glendale, CA OR Orlando, FL.
This is a full time role.
Responsibilities:
Conduct design assurance activities in standards and best practices development, partnering with ride engineering partners across Disney Experiences and the amusement ride industry.
* Stay abreast of, and participate in the development of, company and industry standards and methodologies.
* Participate in company committees and industry organizations involved in ride safety and design.
* Maintain and improve engineering processes to meet project delivery and design assurance objectives.
* Conduct design assurance activities for ride project design review and testing, partnering with ride project team members.
* Review ride software designs for compliance with industry and company standards.
* Assess whether designs are of appropriate quality and meet project requirements.
* Advise project teams on optimal ride control software designs, safety analysis methods and results, and testing approaches.
* Mentor and train ride control engineers.
* Prepare and present Disney requirements and design practices for internal training.
* Advocate the processes, standards, and practices that produce quality designs.
* Mentor and assist design engineers with technical challenges, standards, and methodology.
* Mentor ride engineers in design excellence.
Basic Qualifications:
* At least 15 years of experience with ride control software design, engineering, installation, and commissioning
* Proficient in fail-safe and safety-related control system design
* Experience with requirements development, test plans/procedures, and test execution
* Extensive knowledge of ride control software architectures
* Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
* Proficient in automated control software design applying functional safety concepts and standards
* Demonstrated practice in functional safety standards, including IEC 61508, IEC 62061, ISO 13849
* Familiarity with amusement and automation industry standards, including ASTM F2291
* Solid skills in technical document writing and communication
* Ability to travel domestically and internationally for 1-week to 3-month durations
* Ability to handle multiple complex efforts simultaneously, exert influence, and manage tasks and priorities
Preferred Qualifications:
* Knowledge of amusement industry standards applicable in US, Japan, France, Hong Kong, and China
* Proficient in Rockwell, Siemens, and Beckhoff automation software architecture and components
* Expertise in motor and motion control methods and components
* Solid understanding of kinematics as it pertains to ride systems and machines
* Knowledge of pneumatic controls and devices
* Knowledge of modeling methodologies using UML/SysML
* Experience with multitasking software platforms and design approaches
* Experience in broad application of control system theory (closed-loop control, MIMO systems, positioning and navigation)
Required Education:
Bachelor of Science Degree in an engineering field from an accredited university required.
Additional Information:
Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ( ) .
#DXMedia
The hiring range/pay rate for Principal Ride Development Engineer is $188,400.00-$252,600.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
Ride Control Software Engineers work within Imagineering’s Ride Engineering Studio in a highly collaborative environment on diverse teams. Engineering activities cover all aspects of ride control software design and implementation, from concept to commissioning, for a wide variety of innovative ride platforms.
The role of Ride Control Software Engineer Principal (Design Assurance) focuses on design, analysis, system safety, and verification across multiple projects, supporting project teams in critical engineering quality activities.
This role will report to the Executive, Ride Controls Software Engineering.
This position is located in Glendale, CA OR Orlando, FL.
This is a full time role.
Responsibilities:
Conduct design assurance activities in standards and best practices development, partnering with ride engineering partners across Disney Experiences and the amusement ride industry.
Stay abreast of, and participate in the development of, company and industry standards and methodologies.
Participate in company committees and industry organizations involved in ride safety and design.
Maintain and improve engineering processes to meet project delivery and design assurance objectives.
Conduct design assurance activities for ride project design review and testing, partnering with ride project team members.
Review ride software designs for compliance with industry and company standards.
Assess whether designs are of appropriate quality and meet project requirements.
Advise project teams on optimal ride control software designs, safety analysis methods and results, and testing approaches.
Mentor and train ride control engineers.
Prepare and present Disney requirements and design practices for internal training.
Advocate the processes, standards, and practices that produce quality designs.
Mentor and assist design engineers with technical challenges, standards, and methodology.
Mentor ride engineers in design excellence.
Basic Qualifications:
At least 15 years of experience with ride control software design, engineering, installation, and commissioning
Proficient in fail-safe and safety-related control system design
Experience with requirements development, test plans/procedures, and test execution
Extensive knowledge of ride control software architectures
Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
Proficient in automated control software design applying functional safety concepts and standards
Demonstrated practice in functional safety standards, including IEC 61508, IEC 62061, ISO 13849
Familiarity with amusement and automation industry standards, including ASTM F2291
Solid skills in technical document writing and communication
Ability to travel domestically and internationally for 1-week to 3-month durations
Ability to handle multiple complex efforts simultaneously, exert influence, and manage tasks and priorities
Preferred Qualifications:
Knowledge of amusement industry standards applicable in US, Japan, France, Hong Kong, and China
Proficient in Rockwell, Siemens, and Beckhoff automation software architecture and components
Expertise in motor and motion control methods and components
Solid understanding of kinematics as it pertains to ride systems and machines
Knowledge of pneumatic controls and devices
Knowledge of modeling methodologies using UML/SysML
Experience with multitasking software platforms and design approaches
Experience in broad application of control system theory (closed-loop control, MIMO systems, positioning and navigation)
Required Education:
Bachelor of Science Degree in an engineering field from an accredited university required.
Additional Information:
Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at
#DXMedia
The hiring range/pay rate for Principal Ride Development Engineer is $188,400.00-$252,600.00 per year. The base pay actually offered will take into account internal equity and also may vary
depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
$12.50 / Hour
At Carowinds, work is FUN! As an essential part of our Ride Operations team, you will ensure each ride operates safely and efficiently. Ride Operators work at a fast pace while maintaining strong attention to detail and utilizing essential communication skills. You’ll also:
- Test equipment daily before opening the ride to guests.
- Enforce park policies, ride restrictions and ride recommendations.
- Restrict the number of guests on the loading platform to the number who can be seated on the ride.
- Ensure safe operation of the ride. Makes certain that queue lines are safe and orderly.
- Assist with the loading and unloading of the ride to include small children and guests with disabilities.
- Verify that safety restraints and belts are correctly secured before the ride is set into motion.
- Take appropriate action to answer or resolve guest questions and complaints.
- Measure children at height stations and issues appropriate wristbands .
- Record hourly ride capacity and cycles.
- Give directions and deliver ride spiels using a microphone.
Some of our amazing perks and benefits:
- FREE admission to Carowinds and other Six Flags Entertainment parks!
- FREE tickets for friends and family!
- 10% discounts on food and 20% discounts on merchandise!
- Work with people from here, near, and from all over the world!
Apply now if you're looking for a rewarding job that's also FUN! Carowinds offers convenient hours for any college student, retiree, and everyone in between! Our jobs can lead to a successful future by developing resume-building skills as well as gaining knowledge through training and work experience.
Positions are currently available for those who are 16 and older.
Responsibilities:We are here to make people happy!! Carowinds associates are enthusiastic about their work because they create fun and memories to last lifetime! They are crucial to providing guests with a variety of engaging activities that reflect and uphold our core values of Integrity, Courtesy, and Inclusiveness.
Qualifications:- You!
- People who love helping others and will support the needs of our guests and associates.
- Good judgement and a commitment to safety.
- Ability to work and interact with people from diverse backgrounds.
- Individuals with a passion and excitement about Carowinds.
- Availability to include some weekdays, weekends, evenings, and holidays.
- Ability to pass a mandatory or random drug test, per Company policy, unless prohibited by federal, state or provincial law.
Ready for a job that will throw you for a loop? Drop into our ride operations team and twist your way to success. Whether you’re launching coasters or safely loading them, you’ll be the one to make the thrills come alive!
Starting Pay:
Ride Attendant (16/17 years of age): $15.00/Hour
Ride Operator (18 or older): $15.50/Hour
Responsibilities:
- Providing guests with a safe and enjoyable ride experience
- Entertaining guests and calming their nerves as they board our world-class rides and attractions
- Controlling buttons and switches to launch attractions out onto the ride course
- Ensuring the overall safe operation of your assigned ride or attraction
- Making sure seat belts are tight, loose items are secure, and lap bars are locked to keep guests safe
- Enforcing rider restrictions and ensuring guest meet the height requirements
- Assisting guests in and out of ride vehicles and cycle through the line with a safe sense of urgency
- Keeping ride patios, queue lines, and midways clean and looking great
- Acting as a first responder to ride emergencies to keep guests calm
- Enforcing all Six Flags New England policies
- Assisting in other areas of the Rides Department
- Performing other incidental and related duties as required and assigned
Qualifications:
- Ability to work in an environment as fast-paced as our coasters
- Ability to pass ride certification tests
- Strong attention to detail and commitment to safety
- Friendly, outgoing personality inviting guests to your boarding station
- Positive attitude to make guests excited about their ride
- Ability to remain calm in stressful situations
- Must be 16 years or older
- Willing to work flexible hours, including nights, weekends, and holidays
- Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
- Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc
About the Role & Team
Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
Are you an OT or ICS engineer who has an interest and aptitude for network design and cyber security?
As a Ride Control Systems Security Engineer you will work within Walt Disney Imagineering’s Ride Studio on multiple ride attraction projects and are responsible for network architecture and cyber security design and implementation activities on new ride projects for installation in all our parks across the globe. Join us in a highly collaborative and self-directed atmosphere to lead efforts applying leading edge network technology on Disney rides!
You will report to the Ride Controls Systems Engineering Executive
This is a full time role.
What You Will Do:
- Lead Operational Technology (OT)/ Industrial Control Systems (ICS) network architecture and cyber security systems development, design, and implementation for automation and embedded control systems on a wide variety of large-scale, highly complex, and innovative ride systems
- Perform engineering design and analysis for ride system networks, with focus on automation system architecture
- Design and test cyber security solutions and network architectures for ride systems
- Design, model, and analyze data network communication systems
- Research and test new products, technologies, and methodologies and conduct trade-off studies
- Prepare and propose new cyber security and network architecture concepts and standards
- Lead standards and policies development for ride control network and cyber security architectures
- Collaborate with and support project teams on network requirements, implementation, and issues
- Collaborate with attraction development teams to design and deliver ride networks
- Develop and analyze OT network performance requirements for high availability real-time system
- Develop and capture requirements and functional specifications in documents, drawings, and models
- Develop implementation plans and budgets for ride control network systems
- Develop and implement mock-ups and prototypes for proof-of concept efforts
- Develop test requirements and documents and conduct ride network installation/commissioning efforts
Required Qualifications & Skills
- At least 3 years of experience with design, engineering, installation, and commissioning of highly networked automation, process control, and industrial control systems
- At least 3 years of experience in network systems design, installation and configuration
- At least 3 years of experience with Linux and Windows system administration experience
- Demonstrated experience in network design and analysis approaches to ensure and balance network availability, performance, resiliency and security
- Knowledge of wired and short-range wireless communication networks used in high availability industrial and embedded applications
- Solid understanding of communication technologies/protocols: TCP/IP, CAN, Serial, ProfiNET, Ethernet/IP, EtherCAT, 802.11
- Demonstrated experience in wireless communications for control and monitoring high-availability safety critical systems
- Demonstrated experience evaluating and remediating network and system vulnerabilities
- Demonstrated experience with cyber security technologies including firewalls, endpoint security solutions, VPNs, network security monitoring and detection, and security information and event management (SIEM).
- Solid skills in technical document writing
- Ability to travel and work both domestically and internationally, for varying durations that could be up to 3 months
- Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
- Ability to maintain knowledge of constantly changing network and cyber security concerns in OT/ICS systems
Preferred Qualifications and Skills
- Proficient in Rockwell and/or Siemens automation systems architecture and components
- Experienced in fail-safe and safety-related system design and analysis
- Experience with multitasking software platforms and design approaches
- Experience with wired and wireless network design and configuration
- Experience with firewalls, VPNs, network security monitoring, and vulnerability assessment tools
- Knowledge of software configuration management/version control tools
- Cisco, GIAC, CompTIA or other relevant network and cyber security certifications strongly preferred
Education
- As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university required; Electrical Engineering preferred
Additional Information:
- Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at
#DXmedia
The hiring range for this position in California is $129,300 to $173,300. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
Overview: $14 / hourAge RequirementsApplicants must be 16 years of age or older for this position.Joining our Rides Team as a seasonal ride operator means ensuring the safe operation of our rides and attractions along with the safety of our guests.With more than 60 rides, an award -winning kids' area, 20-acre waterpark, shows and attractions, Kings Dominion offers the perfect combination of world-class thrills and attractions.Some of our amazing perks and benefits:FREE Admission to Kings Dominion and other Six Flags Parks and Waterparks !FREE tickets for friends and family!Exclusive employee RIDE nights, GAME nights, and FREE FOOD events!Paid training and opportunities for advancement!Discounts on park food and merchandise!
Responsibilities:Test equipment daily before opening the ride to guests.Enforce Park policies, ride restrictions and ride recommendations.Verify that safety restraints and belts are correctly secured before the ride is set into motion.Ensure safe operation of the ride.
Make certain that queue lines are safe and orderly.Assist with the loading and unloading of the ride to include small children and guests with disabilities.~ Opportunity to train on different rides and attractions in all areas of the park.
Qualifications:You!People who interact well with others from all backgrounds and age groups .Individuals who work well within a team with a commitment to safety.Availability to include some weekdays, weekends, evenings, and holidays as needed.People who love helping others and will support the needs of our guests and associates.
Ready for a job that will throw you for a loop? Drop into our ride operations team and twist your way to success. Whether you’re launching coasters or safely loading them, you’ll be the one to make the thrills come alive!
Starting Pay:
Ride Attendant (16/17 years of age): $15.00/Hour
Ride Operator (18 or older): $15.50/Hour
Responsibilities:
- Providing guests with a safe and enjoyable ride experience
- Entertaining guests and calming their nerves as they board our world-class rides and attractions
- Controlling buttons and switches to launch attractions out onto the ride course
- Ensuring the overall safe operation of your assigned ride or attraction
- Making sure seat belts are tight, loose items are secure, and lap bars are locked to keep guests safe
- Enforcing rider restrictions and ensuring guest meet the height requirements
- Assisting guests in and out of ride vehicles and cycle through the line with a safe sense of urgency
- Keeping ride patios, queue lines, and midways clean and looking great
- Acting as a first responder to ride emergencies to keep guests calm
- Enforcing all Six Flags New England policies
- Assisting in other areas of the Rides Department
- Performing other incidental and related duties as required and assigned
Qualifications:
- Ability to work in an environment as fast-paced as our coasters
- Ability to pass ride certification tests
- Strong attention to detail and commitment to safety
- Friendly, outgoing personality inviting guests to your boarding station
- Positive attitude to make guests excited about their ride
- Ability to remain calm in stressful situations
- Must be 16 years or older
- Willing to work flexible hours, including nights, weekends, and holidays
- Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
- Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc
Ready for a job that will throw you for a loop? Drop into our ride operations team and twist your way to success. Whether you’re launching coasters or safely loading them, you’ll be the one to make the thrills come alive!
Starting Pay:
Ride Attendant (16/17 years of age): $15.00/Hour
Ride Operator (18 or older): $15.50/Hour
Responsibilities:
- Providing guests with a safe and enjoyable ride experience
- Entertaining guests and calming their nerves as they board our world-class rides and attractions
- Controlling buttons and switches to launch attractions out onto the ride course
- Ensuring the overall safe operation of your assigned ride or attraction
- Making sure seat belts are tight, loose items are secure, and lap bars are locked to keep guests safe
- Enforcing rider restrictions and ensuring guest meet the height requirements
- Assisting guests in and out of ride vehicles and cycle through the line with a safe sense of urgency
- Keeping ride patios, queue lines, and midways clean and looking great
- Acting as a first responder to ride emergencies to keep guests calm
- Enforcing all Six Flags New England policies
- Assisting in other areas of the Rides Department
- Performing other incidental and related duties as required and assigned
Qualifications:
- Ability to work in an environment as fast-paced as our coasters
- Ability to pass ride certification tests
- Strong attention to detail and commitment to safety
- Friendly, outgoing personality inviting guests to your boarding station
- Positive attitude to make guests excited about their ride
- Ability to remain calm in stressful situations
- Must be 16 years or older
- Willing to work flexible hours, including nights, weekends, and holidays
- Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
- Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc
Ready for a job that will throw you for a loop? Drop into our ride operations team and twist your way to success. Whether you’re launching coasters or safely loading them, you’ll be the one to make the thrills come alive!
Starting Pay:
Ride Attendant (16/17 years of age): $15.00/Hour
Ride Operator (18 or older): $15.50/Hour
Responsibilities:
- Providing guests with a safe and enjoyable ride experience
- Entertaining guests and calming their nerves as they board our world-class rides and attractions
- Controlling buttons and switches to launch attractions out onto the ride course
- Ensuring the overall safe operation of your assigned ride or attraction
- Making sure seat belts are tight, loose items are secure, and lap bars are locked to keep guests safe
- Enforcing rider restrictions and ensuring guest meet the height requirements
- Assisting guests in and out of ride vehicles and cycle through the line with a safe sense of urgency
- Keeping ride patios, queue lines, and midways clean and looking great
- Acting as a first responder to ride emergencies to keep guests calm
- Enforcing all Six Flags New England policies
- Assisting in other areas of the Rides Department
- Performing other incidental and related duties as required and assigned
Qualifications:
- Ability to work in an environment as fast-paced as our coasters
- Ability to pass ride certification tests
- Strong attention to detail and commitment to safety
- Friendly, outgoing personality inviting guests to your boarding station
- Positive attitude to make guests excited about their ride
- Ability to remain calm in stressful situations
- Must be 16 years or older
- Willing to work flexible hours, including nights, weekends, and holidays
- Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
- Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc
Ready for a job that will throw you for a loop? Drop into our ride operations team and twist your way to success. Whether you’re launching coasters or safely loading them, you’ll be the one to make the thrills come alive!
Starting Pay:
Ride Attendant (16/17 years of age): $15.00/Hour
Ride Operator (18 or older): $15.50/Hour
Responsibilities:
- Providing guests with a safe and enjoyable ride experience
- Entertaining guests and calming their nerves as they board our world-class rides and attractions
- Controlling buttons and switches to launch attractions out onto the ride course
- Ensuring the overall safe operation of your assigned ride or attraction
- Making sure seat belts are tight, loose items are secure, and lap bars are locked to keep guests safe
- Enforcing rider restrictions and ensuring guest meet the height requirements
- Assisting guests in and out of ride vehicles and cycle through the line with a safe sense of urgency
- Keeping ride patios, queue lines, and midways clean and looking great
- Acting as a first responder to ride emergencies to keep guests calm
- Enforcing all Six Flags New England policies
- Assisting in other areas of the Rides Department
- Performing other incidental and related duties as required and assigned
Qualifications:
- Ability to work in an environment as fast-paced as our coasters
- Ability to pass ride certification tests
- Strong attention to detail and commitment to safety
- Friendly, outgoing personality inviting guests to your boarding station
- Positive attitude to make guests excited about their ride
- Ability to remain calm in stressful situations
- Must be 16 years or older
- Willing to work flexible hours, including nights, weekends, and holidays
- Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
- Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc
About the Role & Team
Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
Are you an OT or ICS engineer who has an interest and aptitude for network design and cyber security?
As a Ride Control Systems Security Engineer you will work within Walt Disney Imagineering’s Ride Studio on multiple ride attraction projects and are responsible for network architecture and cyber security design and implementation activities on new ride projects for installation in all our parks across the globe. Join us in a highly collaborative and self-directed atmosphere to lead efforts applying leading edge network technology on Disney rides!
You will report to the Ride Controls Systems Engineering Executive
This is a full time role.
What You Will Do:
- Lead Operational Technology (OT)/ Industrial Control Systems (ICS) network architecture and cyber security systems development, design, and implementation for automation and embedded control systems on a wide variety of large-scale, highly complex, and innovative ride systems
- Perform engineering design and analysis for ride system networks, with focus on automation system architecture
- Design and test cyber security solutions and network architectures for ride systems
- Design, model, and analyze data network communication systems
- Research and test new products, technologies, and methodologies and conduct trade-off studies
- Prepare and propose new cyber security and network architecture concepts and standards
- Lead standards and policies development for ride control network and cyber security architectures
- Collaborate with and support project teams on network requirements, implementation, and issues
- Collaborate with attraction development teams to design and deliver ride networks
- Develop and analyze OT network performance requirements for high availability real-time system
- Develop and capture requirements and functional specifications in documents, drawings, and models
- Develop implementation plans and budgets for ride control network systems
- Develop and implement mock-ups and prototypes for proof-of concept efforts
- Develop test requirements and documents and conduct ride network installation/commissioning efforts
Required Qualifications & Skills
- At least 3 years of experience with design, engineering, installation, and commissioning of highly networked automation, process control, and industrial control systems
- At least 3 years of experience in network systems design, installation and configuration
- At least 3 years of experience with Linux and Windows system administration experience
- Demonstrated experience in network design and analysis approaches to ensure and balance network availability, performance, resiliency and security
- Knowledge of wired and short-range wireless communication networks used in high availability industrial and embedded applications
- Solid understanding of communication technologies/protocols: TCP/IP, CAN, Serial, ProfiNET, Ethernet/IP, EtherCAT, 802.11
- Demonstrated experience in wireless communications for control and monitoring high-availability safety critical systems
- Demonstrated experience evaluating and remediating network and system vulnerabilities
- Demonstrated experience with cyber security technologies including firewalls, endpoint security solutions, VPNs, network security monitoring and detection, and security information and event management (SIEM).
- Solid skills in technical document writing
- Ability to travel and work both domestically and internationally, for varying durations that could be up to 3 months
- Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
- Ability to maintain knowledge of constantly changing network and cyber security concerns in OT/ICS systems
Preferred Qualifications and Skills
- Proficient in Rockwell and/or Siemens automation systems architecture and components
- Experienced in fail-safe and safety-related system design and analysis
- Experience with multitasking software platforms and design approaches
- Experience with wired and wireless network design and configuration
- Experience with firewalls, VPNs, network security monitoring, and vulnerability assessment tools
- Knowledge of software configuration management/version control tools
- Cisco, GIAC, CompTIA or other relevant network and cyber security certifications strongly preferred
Education
- As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university required; Electrical Engineering preferred
Additional Information:
- Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at
#DXmedia
The hiring range for this position in California is $129,300 to $173,300. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
About The Role & Team
Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
Ride Control Hardware Engineers work within Walt Disney Imagineering's Ride Studio in a highly collaborative environment on diverse teams. Engineering activities cover all aspects of control system design and implementation, from concept to commissioning, for a wide variety of innovative ride platforms.
The Ride Control Hardware Engineer will report to the Ride Control Systems Engineering Executive.
This is a full time role.
What You Will Do:
* Support programmable, electrical, and electronic hardware scope to design and deliver control systems for complex, innovative ride systems
* Perform engineering design and analysis for ride systems, focusing on electrical control systems
* Develop control system and network architectures
* Design, model, and analyze electrical supply systems
* Research new products, technologies, and methodologies
* Lead a team of ride control engineers and collaborate with other professionals to develop ride control systems
* Develop control equipment requirements and specifications
* Develop and implement proof-of-concept mock-ups and prototypes
* Conduct hazard assessments and failure modes and effects analysis
* Manage vendors, contractors, and consultants developing and implementing ride control systems
* Define and oversee supplier and consultant design and delivery
* Ensure all delivery and performance requirements are satisfied
* Conduct factory acceptance tests and ride system installation
Required Qualifications & Skills
* 5+ years of Controls Experience
* Experienced in fail-safe and safety-related control system design
* Extensive knowledge of control processors, components, and communication networks
* Highly proficient in industrial control system installation, integration, and commissioning
* Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
* Extensive knowledge of electrical design standards and codes, including UL508a and NEC
* Familiarity with amusement and automation industry standards, including ASTM F2291
* Expertise in motor and motion control methods and components
* Ability to travel domestically and internationally for 1-week to 3-year durations
* Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
Preferred Qualifications & Skills
* Licensed professional engineer
* Proficient with engineering design tools including AutoCAD, Matlab, Simulink, Solidworks, EPLAN
* Proficient in Rockwell and Siemens automation systems architecture and components
* Electrical and troubleshooting skills (voltmeter, oscilloscope, etc.)
* Knowledge of international amusement industry standards applicable in France, Hong Kong, or China
Education
* As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred
Additional Information :
* Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ( ) .
#DXMedia
the hiring range for this position in Glendale, CA is $129,300.00-$173,300.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
Ride Control Hardware Engineers work within Walt Disney Imagineering's Ride Studio in a highly collaborative environment on diverse teams. Engineering activities cover all aspects of control system design and implementation, from concept to commissioning, for a wide variety of innovative ride platforms.
The Ride Control Hardware Engineer will report to the Ride Control Systems Engineering Executive.
This is a full time role.
What You Will Do:
* Support programmable, electrical, and electronic hardware scope to design and deliver control systems for complex, innovative ride systems
* Perform engineering design and analysis for ride systems, focusing on electrical control systems
* Develop control system and network architectures
* Design, model, and analyze electrical supply systems
* Research new products, technologies, and methodologies
* Lead a team of ride control engineers and collaborate with other professionals to develop ride control systems
* Develop control equipment requirements and specifications
* Develop and implement proof-of-concept mock-ups and prototypes
* Conduct hazard assessments and failure modes and effects analysis
* Manage vendors, contractors, and consultants developing and implementing ride control systems
* Define and oversee supplier and consultant design and delivery
* Ensure all delivery and performance requirements are satisfied
* Conduct factory acceptance tests and ride system installation
Required Qualifications & Skills
* 10+ Years experience in the Engineering field as related to controlling electromechanical systems
* Experienced in fail-safe and safety-related control system design
* Extensive knowledge of control processors, components, and communication networks
* Highly proficient in industrial control system installation, integration, and commissioning
* Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
* Extensive knowledge of electrical design standards and codes, including UL508a and NEC
* Familiarity with amusement and automation industry standards, including ASTM F2291
* Expertise in motor and motion control methods and components
* Ability to travel domestically and internationally for 1-week to 3-year durations.
* Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
Preferred Qualifications & Skills
* Licensed professional engineer
* Proficient with engineering design tools including AutoCAD, Matlab, Simulink, Solidworks, EPLAN
* Proficient in Rockwell and Siemens automation systems architecture and components
* Electrical and troubleshooting skills (voltmeter, oscilloscope, etc.)
* Knowledge of international amusement industry standards applicable in France, Hong Kong, or China
Education
* As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred
Additional Information :
* Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ( ) .
#DxMedia
The hiring range for this position in California is $151,900 to $246,700 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered
$12.50 / Hour
At Carowinds, work is FUN! As an essential part of our Ride Operations team, you will ensure each ride operates safely and efficiently. Ride Operators work at a fast pace while maintaining strong attention to detail and utilizing essential communication skills. You’ll also:
- Test equipment daily before opening the ride to guests.
- Enforce park policies, ride restrictions and ride recommendations.
- Restrict the number of guests on the loading platform to the number who can be seated on the ride.
- Ensure safe operation of the ride. Makes certain that queue lines are safe and orderly.
- Assist with the loading and unloading of the ride to include small children and guests with disabilities.
- Verify that safety restraints and belts are correctly secured before the ride is set into motion.
- Take appropriate action to answer or resolve guest questions and complaints.
- Measure children at height stations and issues appropriate wristbands.
$12.50 / Hour
At Carowinds, work is FUN! As an essential part of our Ride Operations team, you will ensure each ride operates safely and efficiently. Ride Operators work at a fast pace while maintaining strong attention to detail and utilizing essential communication skills. You’ll also:
- Test equipment daily before opening the ride to guests.
- Enforce park policies, ride restrictions and ride recommendations.
- Restrict the number of guests on the loading platform to the number who can be seated on the ride.
- Ensure safe operation of the ride. Makes certain that queue lines are safe and orderly.
- Assist with the loading and unloading of the ride to include small children and guests with disabilities.
- Verify that safety restraints and belts are correctly secured before the ride is set into motion.
- Take appropriate action to answer or resolve guest questions and complaints.
- Measure children at height stations and issues appropriate wristbands.
$12.50 / Hour
At Carowinds, work is FUN! As an essential part of our Ride Operations team, you will ensure each ride operates safely and efficiently. Ride Operators work at a fast pace while maintaining strong attention to detail and utilizing essential communication skills. You’ll also:
- Test equipment daily before opening the ride to guests.
- Enforce park policies, ride restrictions and ride recommendations.
- Restrict the number of guests on the loading platform to the number who can be seated on the ride.
- Ensure safe operation of the ride. Makes certain that queue lines are safe and orderly.
- Assist with the loading and unloading of the ride to include small children and guests with disabilities.
- Verify that safety restraints and belts are correctly secured before the ride is set into motion.
- Take appropriate action to answer or resolve guest questions and complaints.
- Measure children at height stations and issues appropriate wristbands.