Remote Controller Jobs Jobs in Usa

• Lay out, build, test, troubleshoot, repair and modify developmental and production electronic components, parts, equipment, and systems • Troubleshooting servo drives • Troubleshooting servo motors • Troubleshooting machinery • Performs preventative maintenance • Maintaining Vision Systems • Perform other duties as required or requested by management.

• Associate's Degree in related field; or two to four years related industry experience and/or training; or equivalent combination of education and experience.

• Capable of reading and understanding PLC programs, such as Siemens, Beckhoff, Moller, Allen Bradley.

• Ability to read wiring schematics • Basic mechanical skills to include hydraulics and pneumatics understanding • Understanding of the work principles of sensors, proxes, vision • Knowledge and understanding of electricity • Must be comfortable performing work between 0 and 480 volts • Understanding of Ethernet and Ethercat • Basic mechanical skills to include hydraulics and pneumatics understanding • Knowledge of relay logic circuits, PMA Controllers, PID Controller and MotoMan Robotics • ze: 12px;">Basic mechanical skills to include hydraulics and pneumatics understanding • Knowledge of relay logic circuits, PMA Controllers, PID Controller and MotoMan Robotics • Experience or Training in 5's, Lockout & Tagout training, Basic Plant Safety, General Machine Operations.

• Based on competence and need, training or knowledge in Hazardous Waste, ISO 14001 Awareness, ISO 14001 Internal Auditing, ISO 14001 & Beyond, ISO 14001 Top Management, HazWaste/Operator Program Training, HazWaste Manifest and Core Program Training, HazWaste/Crisis Management Training.

Must be familiar with Quality, Materials, Environmental, and Safety Policies.

• Competitive Base Salary!
• Extremely Competitive Equity Package!
• Flexible Work Schedules!
• Accelerated Career Growth!

Job Title: Electrical Engineer (E3S / Cable Design)

Location: Santa Clara, CA (Onsite)

Experience: 6+ Years

We are looking for an Electrical Engineer with strong E3S and cable design experience to support controller builds and electrical documentation.

Key Responsibilities:

Develop electrical schematics, wiring diagrams, and harness layouts using E3S

Design cables & harnesses (connector selection, wire sizing, routing)

Create fabrication documents: cable charts, wire lists, build instructions

Support controller build activities (wiring, routing, termination, testing)

Work with mechanical teams for electromechanical integration

Troubleshoot wiring issues during prototype/production builds

Maintain documentation and revision control in PLM / ERP systems

Required Skills:

E3S (Electrical Schematic Design)

Cable & Harness Design

Controller Build & Electrical Fabrication

Wiring Diagrams & Electrical Documentation

Plant Design Engineering – Electrical

Finance Manager / Controller

Location: Denver, Colorado (On-site / Hybrid)

Department: Finance & Accounting

Employment Type: Full-time

Overview

We are seeking an experienced Finance Manager / Controller to support a major infrastructure project. This role will report into senior leadership and play a key part in establishing and managing the finance function from the ground up.

The position is responsible for overseeing all financial operations, including high-volume transaction management, reconciliation, reporting, and compliance. You will act as a key finance partner to both internal stakeholders and the end client, providing insight, control, and strategic guidance across the project lifecycle.

Key Responsibilities

• Lead the setup and ongoing development of finance processes, controls, and reporting structures
• Oversee high-volume financial transactions, including reconciliations, payments, and adjustments
• Manage end-to-end reconciliation processes across multiple payment streams and interfaces
• Produce accurate and timely financial reports (daily, monthly, quarterly, annual)
• Ensure compliance with internal controls, regulatory standards, and financial policies
• Support budgeting, forecasting, and cash flow management
• Act as a trusted advisor to senior stakeholders, providing financial insights and recommendations
• Collaborate with operational and technical teams to ensure accurate financial integration and reporting
• Drive process improvements and operational efficiencies across finance workflows
• Oversee audits, risk management, and compliance activities (e.g. SOX, IFRS where applicable)
• Manage vendor-related financials and ensure cost control and contract compliance
• Lead and develop the finance team, fostering a high-performance environment
• Maintain oversight of digital payments, transaction flows, and exception handling
• Ensure KPI and SLA adherence across financial operations

Requirements

Education:

• Bachelor’s degree in Accounting or Finance (required)
• Master’s degree (preferred)

Experience:

• 5+ years in a Finance Manager / Controller role, with 7+ years overall experience
• Background in high-transaction, service-based or project environments (e.g. infrastructure, transportation, utilities, healthcare)
• Strong experience with reconciliation, financial reporting, and transaction oversight
• Experience working in high-volume environments (large-scale daily transactions)
• CPA qualification preferred (not essential)
• Experience with ERP systems (SAP, PeopleSoft, or similar)
• Strong understanding of GAAP / IFRS and financial compliance standards
• Proven experience in audit, risk management, and regulatory compliance
• Strong analytical and problem-solving skills
• Ability to manage multiple priorities in a fast-paced environment

Additional Information

• High level of client interaction and stakeholder management required
• Opportunity to build and shape a finance function within a major project
• Competitive compensation package, including performance-related bonus

Join our dynamic team as a NCCER Millwright, where your skills will be pivotal in maintaining and enhancing our manufacturing facility's operational excellence! In this role, you will leverage your mechanical knowledge and industrial maintenance experience to ensure all machinery operates smoothly and efficiently. You’ll work hands-on with a variety of equipment, including programmable logic controllers (PLCs), hydraulics, and HVAC systems. Your expertise will not only keep our operations running but also contribute to our commitment to outstanding customer service.

What you’ll do

• Perform routine maintenance and repairs on industrial machinery to minimize downtime.
• Troubleshoot and resolve mechanical issues using precision measuring instruments and schematics.
• Collaborate with the technical sales team to provide insights on equipment functionality and customer requirements.
• Operate scissor lifts safely while conducting field service tasks.
• Utilize Computerized Maintenance Management Systems (CMMS) for tracking maintenance activities.
• Conduct electrical work, including high voltage and low voltage tasks, ensuring compliance with safety standards.
• Engage in welding activities as needed, adhering to location-specific welding protocols.
• Provide exceptional customer service by addressing client concerns and offering solutions promptly.

Basic qualifications

• Proven industrial mechanic experience with a solid understanding of mechanical systems.
• Strong electrical experience, particularly with high voltage systems.
• Familiarity with HVAC/R systems and their maintenance.
• Proficiency in using ammeters, ohmmeters, and other diagnostic tools.
• HAVE PIPELINE EXP

Preferred qualifications

• Experience working in a manufacturing facility environment.
• Knowledge of programmable logic controllers (PLCs) and their applications.
• Background in technical sales or customer service roles within the industry.
• Military experience is a plus, showcasing discipline and technical skills.

Why you’ll love it here

We are dedicated to fostering an environment where our employees can thrive both personally and professionally. Our commitment extends beyond just your role; we offer benefits that support your overall well-being during key moments in life.

Our benefits include:

• Comprehensive health coverage options
• Opportunities for professional development and training
• Support for physical fitness initiatives
• A collaborative work environment that values your contributions

Join us in making a difference! Your expertise as a Millwright will not only drive our success but also enhance your career journey. We can’t wait to welcome you aboard!

Job Type: Full-time

• Seniority Level
• Associate
• Industry
• Construction
• Employment Type
• Full-time
• Job Functions
• Manufacturing
• Skills
• Programmable Logic Controller (PLC)
• Hydraulics
• Precision Measuring
• Sales
• Mechanical Systems
• Customer Service
• Manufacturing
• Machinery
• Voltage
• Technical Sales

Title

Electrical Controls Engineer/Industrial Electrician

Report to

Facility/Engineering Director.

Job Summary

Individual must be able to perform design,engineering, and field start up responsibilities for System Integration in the Electrical Controls Industry. In addition, proven trouble

shooting skills are necessary.

Job Duties / Responsibilities

• Design, fabricate, and install PLC based process control panels.
• Troubleshoot and upgrade existing control panels.
• Maintain inventory of all PLC/HMIrack systems and programs.
• Work to install110V, 220V, and 480V 3 phase wiring.
• Real electrical schematics and wiring diagrams.
• Be able to troubleshoot 480V electrical control systems.
• Specify wiring and motor controls for 480V systems.
• Install power distribution and protection systems.
• HMI Interfaces
• Temperature Controllers and Transmitters
• Pressure Transmitters
• 4-20ma Loop Controllers
• Burner Controllers and Actuators
• Industrial pH Meters
• Level Transmitters
• Flow Meters
• Variable Frequency Drives

Work Conditions

• Physically available to lift up to 50lb.
• Exposure to hazardous conditions associated with the Company
• 24/7 availability may be required.
• Manual dexterity and the ability to remain standing, crouching, and bending for long periods of time
• Overtime as needed.

Job Requirements

• AS, BSEE, BSEET, or technical degree.
• 3-5 years of industry experience.
• Review projects including quotes, job specifications, and resolve any quote to job specifications differences.
• System Architecture including non-standard material and control pane lpower requirements/distribution.
• Review specifications and standard practices – inclusive of the internal hardwired and logic standards, general specifications and scope of work.
• Design requirements which include establishing non-standard designs, generating system map layouts, generating a sequence of operations, reviewing cycle time

studies and dimension switch layouts, generation of design packages, design logic, enter logic, and the design of Smart Displays.

• Material responsibility includes advance material order, specifying Mod Box material, specifying Panel material, writing Mod Box EBMs and writing panel material EBMs.
• Assisting with installation • Debugging with no additional support • Launchand Standby
• As Builts

Technology Requirements

• RSLogix 5, 5000
• RS Networx for DeviceNet, ControlNet, EtherNet IP
• DriveExecutive, DriveExplorer

• PanelBuilder PDS, 1400e, 32
• RSView Studio
• Trouble Shooting PID Loops
• Calibrating Process Control Equipment
• Microsoft Office Suite

Benefits

• Competitive Compensation

- 401(k)

• 401(k) Matching
• Medical, Dental,and Vision Benefits
• Paid Time Off and Paid Holiday’s

Classification

Full Time Position

SUMMARY OF POSITION:

The Engineering & Programming Technician works independently throughout the manufacturing plant to analyze, modify, and build control systems to improve safety, quality, delivery, and productivity of equipment and facility systems. Additionally, this individual may be called upon to assist in troubleshooting machine issues, to implement safety, quality, and productivity projects, and to introduce new products and processes. This individual will be responsible for identifying and implementing opportunities that are machine and process related that can be improved through the use of technology. They will need to coach and mentor others within the manufacturing plant in their areas of expertise. This position works with other technicians, tool room personnel, planners/schedulers, engineers, department managers, and operators during the analysis, build, and implementation phases of various projects. This individual will also work with the MES systems group to ensure that Pella control systems standards are applied and maintained.

PELLA CORPORATION REQUIREMENTS:

· Pass drug screen

· Pass pre-work vision screen

· Pass pre-employment tests

· Pass pre-work ability screen

ENVIRONMENT:

· Noise level requires hearing protection in designated areas

· Seasonal high temperatures and humidity

· Work in a team environment with the ability to communicate in a concise, polite and respectful manner

ESSENTIAL RESPONSIBILITIES:

§ Flexibility of work hours including mandatory OT when business needs requires.

§ Ability to safely work with and around moving equipment

§ Ability to communicate in a concise, polite and respectful manner with team members.

§ Regular / dependable attendance consistent with attendance guidelines is required.

§ Must comply with safety, quality, and production requirements and procedures.

§ Must maintain good housekeeping.

§ Design and implement controls for new and existing machines or processes using a variety of hardware components which include PLC’s, HMI’s, CNC’s, PC’s, motion controllers and standard industrial controls.

§ Ability to assist with the building of machines, tools, fixtures, jigs, and templates, as well as the project management of all of these.

§ Extensive knowledge of Programmable Logic Controllers (PLCs) and computers are required.

§ Must independently write, analyze, and modify PLC programs.

§ Ability to assist in maintaining all models and series of PLCs currently in use.

§ Maintain backup copies of PLC programs used in production and facility related equipment.

§ Develops electrical estimates for time, cost, and quality for projects.

§ Must have ability to work with data downloads.

§ Ability to establish and maintain machine settings for data downloads and collaborate with IT to set up or modify settings for data downloads.

§ Ability to troubleshoot and assist maintenance efforts when needed.

§ Ability to perform PM inspections on equipment.

§ Ability to obtain the appropriate PIV license.

§ Ability to work on ladders and vertical lifts when required.

ADDITIONAL RESPONSIBILITIES:

§ Other duties may be assigned.

§ Manage project related to improving equipment and facility using technology

§ Provide training to others on areas of expertise

EDUCATION AND EXPERIENCE:

§ Recommended that this individual has completed or is enrolled and seeking a 2 or 4 year degree in a related field of expertise.

§ Manufacturing-related experience is preferred.

§ Job specific experience is preferred.

§ Maintenance progression completion preferred.

SKILLS AND TALENTS: (*skills are required prior to entry into the position)

§ Decision making / problem solving in a manufacturing environment with minimal supervision.*

§ Ability to suggest process improvements and resolve problems.*

§ Must be self motivated, technically minded, and have good hands-on-ability.*

§ Excellent communication skills and the cognitive ability to learn the safety, quality, and productivity standards.

§ Ability to provide training to improve and maintain the programming knowledge of technical employees.

§ Organizational skills and time management skills to manage projects.

§ Knowledge of computer software such as AutoCAD, CMMS, and Microsoft Office required.

§ Ability to diagnosis and repair electrical, mechanical, pneumatic, and hydraulic problems.

§ Ability to work with sawdust system, compressed air, oxidizers, steam boiler, and electrical distribution systems.

§ Flexibility to travel.*

FACTORY SKILLS CLASSES PREFERRED

§ Industrial Math

§ Measurement Technology

§ Algebra/Trigonometry

§ Product Terminology

MAINTENANCE TRAINING PREFERRED

§ Basic Electricity

§ Motor Control I & II

§ Class B Electrician

§ Beginning Programmable Controllers

§ Pneumatics/Hydraulics

§ Advanced PLC

§ Maintenance Blueprint Reading

§ AutoCAD

PHYSICAL REQUIREMENTS:

· Lift up to 100 lbs. at waist level and up to 70 lbs. at shoulder level up to an occasional basis when moving products

· Push or pull with up to 100 lbs. of force up to an occasional basis when moving products

· Generate up to 90 lbs. of grip strength up to an occasional basis with each hand while handling products

· Generate up to 15 lbs. of pinch strength up to an occasional basis with each hand while handling products

· Display average coordination with both hands up to a continuous basis while performing job tasks

· Perform elevated work up to an occasional basis when handling products

· Stoop, kneel or squat up to an occasional basis when handling products

· Reach forward and to the side up to a frequent basis when handling products

· Stand up to a continuous basis and walk up to a frequent basis during the course of each shift

· Able to perform repetitive tasks up to 12 hours per day

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.