Remote Control Vs Remote Controller Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Effector Analog and Power Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Each of these products generally operate in lower power and voltage ranges less than 10kW and 1000V.

What You Will Do

• Design, analyze, simulate, test, and document power conversion (and related analog) circuitry. This circuitry will dominantly involve non-isolated and isolated switch mode power converters and linear converters. Main emphasis is on board-mounted power end use applications.
• Architect at the power system level.
• See circuit card and stack development through its design phases, from requirements definition through initial integration testing. Includes leading large teams and defining schedules and system level tasking for designs.
• Guide ECAD drafters and junior engineers through layout and routing activities. Define layer stackup definitions. Act as an expert regarding creepage and clearance.
• Lead large teams to success with schedule, budget, and technical execution.
• Engage in personal technical growth and facilitate technical growth in peers and junior engineers. Drive the capture of opportunities needed to mature the organization on the technical front.

Qualifications You Must Have

• Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and 10 years of prior relevant experience
• Design, analysis, test, and/or simulation experience with linear converters, and familiarity with all the following non-isolated converter topologies: buck, boost, buck-boost.
• Professional design, analysis, and simulation experience with at least one of the following isolated converter topologies: flyback, half-bridge, full-bridge, forward, push-pull, resonant.
• Experience with EMI Filter design, transformer or inductor design, analysis, test, and/or simulation considerations in power electronics circuits.
• Analog electronics design, including the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits.

Qualifications We Prefer

• Advanced degree in Electrical Engineering
• Understanding of switching converter control techniques and modes such as voltage mode, peak and average current modes, their advantages and disadvantages. Conceptual familiarity and experience must include stability.
• Experience leading large teams (formally or informally), and experience working with other team leads toward a larger goal.
• Exposure to managing customer relationships.
• Experience communicating and documenting technical topics at the small and large team level and experience presenting to upper levels of management.
• Experience conducting trade studies relating to power electronics architecture at the circuit card stack level.
• Experience guiding drafters through the ECAD process, including the layout and routing concerns specific to non-isolated and isolated power electronics.
• Experience Utilizing and creating electrical design specifications. Should have exposure to requirements definition early in the design cycle.
• Experience designing at the power system level to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality.
• Experience with Texas Instruments C-2000 family of microcontrollers, Microchip PIC controllers, VHDL, or real time operating systems.
• Experience with using CAN-bus, UART, and/or RS-422.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• Work Schedule: 9/80 schedule (every other Friday off)
• Relocation Eligibility: This position is eligible for relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: , AZ: ,-az-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Operations Engineer

Great Company! Great Job!

Onsite in Wixom. Travel role for installations.

What you will do:

Integrate, install, and troubleshoot systems, including but not limited to:

• Computers and all internal components
• Graphics (i.e., Projectors, Monitors, CPU Hardware)
• Projectors
• 3D Vision
• Other Computer Peripherals and (Nondescript) Hardware

• Work independently, with minimal direct supervision, to perform following activities, but not limited to:
• Coordinating Integrations, Installations, Programming, and Troubleshooting
• Working at customer facilities
• Manage and solve assigned cases by providing the best support solution. Reference technical documentation and aid in building internal knowledge base content where gaps may be present
• Train users, customers, and partners to use the system effectively and efficiently
• Work closely with business, engineering, and operations teams to ensure transparent communication and efficient issue resolution (i.e., Task management systems, Excel sheets, Shipping/Receiving Logs, Checklists etc.)
• Ensuring only qualified systems ship
• General Building Maintenance
• Able to design and build structures

What you will need:

• Vocational experience, Certification in a technical field, or Associate Degree in Business Science
• Bachelors Degree in Business Science is a plus
• Strong PC skills with some Audio-Visual Multimedia (AVMM) and Program Logic Controller (PLC) Experience
• Coordinate activities while on-site, creating individual and teamwork schedules
• Project Management is a highly recommended skill
• Troubleshoot all Tier I & II and repair all LGS System deficiencies
• Verbal and written communication skills
• Physically and mentally able to install equipment: In-house and/or at customer locations
• Must be able to use power tools, ladders, boom lifts, forklifts, other electrical and controls equipment
• Customer Service/Management experience required. You will interact with customers
• Willing to travel up to 80% of the time (local, domestic, and possibly international)

Great Benefits - Health, Eye, Dental, 401K!

If you meet the above qualifications and would like to apply for this position, you may email your up-to-date, professional CV/resume to Tim Dameron @

NOTE - US Citizen or Green Card Holders only, please

Perfect placements. Speedy staffing. Tenacious testing. Who’s Adecco, we hear you ask? Only the top provider of first-class HR solutions. Our consultants work with some of the best, and most exciting, companies all over the world. We equip our clients with priceless industry insight and put everything we’ve got into training and mentoring our candidates.

We’re here to match talented people with the job opportunities and employers they’re looking for. On any given day we connect over 700,000 people with fulfilling opportunities that make the most of their skills now and enable them to develop new expertise for the future.

Job Title: Robot Programmer / Technician – Fanuc

Location: Warsaw, IN

Role Overview

We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.

This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.

This is a high-impact, floor-support role in an active manufacturing and commissioning environment.

Mandatory Skills

• 2–5 years of experience with robot setup, troubleshooting, and/or programming
• Experience with Fanuc robotics (SpotTool+ & V9.40 for R30iB Plus controller preferred)
• Certification-only Fanuc experience is acceptable
• Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts

Key Responsibilities

Programming & Optimization

• Develop, modify, and optimize Fanuc robot programs for body shop applications
• Configure robot frames, tools, payloads, and TCPs
• Support rapid program adjustments during special means builds

Commissioning & Startup Support

• Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
• Support robot cell startup and offline system work
• Assist in commissioning activities under tight timelines

Troubleshooting & Floor Support

• Troubleshoot robot alarms, motion issues, and sequence ladder logic
• Coordinate with Controls teams to validate I/O, interlocks, and handshaking
• Provide on-floor programming support during peak production periods

Quality & Collaboration

• Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
• Support containment actions and fast-turn engineering changes
• Follow all safety procedures in active manufacturing environments

Required Qualifications

• 2–5 years of industrial robotics experience
• Strong hands-on Fanuc programming and troubleshooting
• Experience in automotive body shop environments preferred
• Ability to work extended shifts in a fast-paced manufacturing setting
• Strong problem-solving and teamwork skills

Location: Austin – Onsite

KEY RESPONSIBILITIES:

The position entails firmware development in conjunction with coordination with architects, BIOS developers, vendors, and quality assurance teams to develop robust, innovative OpenBMC firmware releases for customer reference boards. Responsibilities include BMC firmware development in an OpenBMC environment, upstreaming work to the OpenBMC community and troubleshooting existing designs.

A successful candidate will employ solid software methodologies, manageability design expertise, debug capabilities, and strong process practices to ensure on-schedule, defect-free firmware deliveries with focus on continuous feature and code improvement.

PREFERRED EXPERIENCE:

• Previous BMC Firmware development experience mandatory (Dell iDRAC, Dell CMC, HP iLo, etc)

• Highly Proficient in developing User Interface based on Java Scripts, Network socket concepts

• Experience with Open Source Baseboard Management Controller (BMC) Software Stack (OpenBMC)

• Programming experience (JavaScript , Shell Scripting, Python, C, C++)

• Knowledge of low-level protocols including I2c, I3c, JTAG, SPI, eSPI, UART, PCIe expected

• Proficient with Source version control systems like Git, Review tools like Gerrit

• Working knowledge of Linux Kernel programming and Linux driver development experience (JTAG, I2C, SPI)

• Hands on experience working with Reference Boards.

• Experience with Linux gcc build and debug tools.

• Strong debug methodology and skills mandatory

• Experience in server manageability architecture mandatory

• Intimate knowledge of software development process methodology expected

• Knowledge of industry standard initiatives such as Redfish, PLDM, MCTP desirable and manageability protocols such as IPMI expected

DESIRED:

• Experience in x86 architecture

• Understanding of Security concepts - Root of Trust, verified boot, measured boot

• Experience in Arm architecture

• Experience reading and understanding digital schematics

• Strong analytical skills and debug methodology expected.

ACADEMIC CREDENTIALS:

• BSEE, BSCS, or BSCE degree or higher

• 5+ years or more of firmware development

• 3 years or more of manageability firmware experience

• Candidates should enjoy working in a dynamic team environment

Just Summary

The Senior Maintenance Engineer is a critical, hands-on leader responsible for ensuring the reliability, safety, and performance of all facility and production equipment at Mama Lola's. This role is deeply embedded in operations and requires a true roll-up-your-sleeves mindset—someone who understands how equipment works, how it fails, and how to fix it quickly and correctly.

This position leads the Maintenance Department while partnering closely with Production, Operations, QA, and Management to maximize equipment uptime, reduce downtime, and support continuous growth. The Senior Maintenance Engineer will design and enforce preventive maintenance programs, develop and standardize operating procedures, oversee equipment installations, and drive capital improvement initiatives with clear ROI justification.

Success in this role requires strong technical expertise, disciplined execution, empathetic leadership, and a passion for building efficient, safe, and scalable food manufacturing operations.

Key Responsibilities

Facility & Equipment Reliability

• Maintain overall health of the facility through routine inspections, identifying cleanliness issues, safety risks, and required repairs or upgrades.
• Develop, implement, and enforce preventive maintenance (PM) programs for all major equipment and building systems.
• Ensure PM compliance and continuously improve maintenance processes to maximize efficiency and minimize unplanned downtime.
• Maintain appropriate spare parts inventory to support rapid repairs and reduce production disruptions.

Leadership & Team Management

• Lead, supervise, and develop the Maintenance Department in alignment with company policies and performance expectations.
• Delegate preventive and corrective maintenance tasks to AM and PM technicians using an intuitive tracking and documentation system called MaintainX.
• Coach, counsel, and support maintenance team members on performance, attendance, safety, and professional growth.
• Review timecards and partner with Human Resources on payroll accuracy and overtime management.

Compliance, Safety & Food Manufacturing Standards

• Ensure all maintenance and facility activities comply with OSHA, HACCP, SQF, and food safety regulations.
• Monitor and update cleaning and sanitation schedules in alignment with SQF program requirements.
• Support Operations and QA during SQF audits by providing accurate maintenance, sanitation, and equipment documentation.
• Enforce lockout/tagout (LOTO), confined space, and other critical safety procedures.

Projects, Capital & Continuous Improvement

• Supervise and execute installation of new equipment and production lines, ensuring proper commissioning and documentation.
• Train maintenance and production teams on new and existing equipment for safe, efficient operation.
• Partner with management to identify, evaluate, and justify capital expenditure projects with clear ROI.
• Brainstorm and implement cost-reduction and efficiency-improvement initiatives across the facility.

Cross-Functional & External Coordination

• Coordinate with external vendors, contractors, and service providers for preventive and emergency maintenance.
• Inspect and validate the quality of work performed by contractors and external service partners.
• Serve as liaison with landlords, property management firms, and the City of Phoenix during inspections and regulatory interactions.
• Track maintenance expenses, utilities, and anomalies; generate and present monthly reports.

Additional Duties

• Assist production with troubleshooting, retraining, and process optimization as needed.
• Perform other duties as assigned to support operational excellence.

Required Skills & Competencies

• Strong mechanical and electrical aptitude with hands-on troubleshooting expertise
• Excellent written and verbal communication skills
• Proven leadership with empathy, accountability, and teamwork
• High initiative, adaptability, and problem-solving ability
• Strong organizational and documentation skills
• Positive attitude, dependability, and strong work ethic
• Bilingual (English/Spanish) preferred

Education & Experience Qualifications

• Bachelor's degree in Engineering or a related technical field
• Minimum of 5 years of experience managing facilities and production equipment in a manufacturing environment, preferably food manufacturing
• At least 3 years of experience developing and managing preventive maintenance programs
• Demonstrated experience in:
• Building and equipment maintenance
• HVAC and building systems
• Construction planning and oversight
• Facility and site planning
• Strong understanding of financial principles including budgeting, ROI, P&L, and cost control
• Proven project management experience, preferably within lean manufacturing environments
• Proficiency in AutoCAD or other 2D drafting software preferred
• Strong knowledge of:
• Electrical, hydraulic, mechanical, and rotating equipment systems
• Programmable Logic Controllers (PLC)
• OSHA regulations and workplace safety standards
• HACCP and food safety regulations
• Hands-on experience with food manufacturing equipment including conveyors, ovens, fryers, flammable materials handling, LOTO, and confined space procedures
• Excellent interpersonal skills with the ability to interact professionally across all organizational levels, contractors, vendors, and regulatory agencies.

Salary - 80K - 90K paid on a bi-weekly basis.

Sincere Builders is adding a Project Manager to its growing team of construction professionals. Our ideal candidate will possess excellent technical skills related to construction management, expert level proficiency in reading all plans and specifications and collaborate with on site Superintendents to deliver a project on time and under budget. Our pay structure rewards work product, skill level and work ethic so if you think you are the right candidate and are looking for a permanent work home, we look forward to hearing from you.

Qualifications:

• Minimum 7 years experience in commercial ground up construction projects in project management role with at least 4 of those years as a Project Manager
• Thorough knowledge in all aspects of building systems with an emphasis on civil and structural work
• Bachelor's degree in relevant field (Masters in Construction Management is preferred)

Responsibilities:

• Lead project implementation and setup requiring interfacing with architect and engineer,
• Conduct subcontractor buyout and subcontract execution
• Work with Superintendent to build Master Construction Schedule
• Process subcontractor payments and vendor payments in conjunction with Controller
• Process Owner billing in conjunction with management
• Manage change orders
• Identify and predict project related conflicts and work with management, Superintendent, Subcontractors, Vendors, inspectors to resolve them,
• Manage and make decisions related to the performance of work related to quality control, Subcontractors staffing, scheduling and material delivery,
• Ensure all necessary permits and insurance are in place and kept current for the term of the project,
• Implement the terms and conditions of the contract based upon established systems, policies and procedures including bidding, preparing contract documents, defining and monitoring compliance with documentation requirements, defining and monitoring compliance with the submittal process and project close out.
• Act as liaison to inspection agencies
• Work with Company upper management and superintendents to continuously modify company processes to improve quality and optimize efficiency
• Complete projects on time, under budget and efficiently utilizing Sincere's processes
• Other duties, services and acts as directed by your supervisor(s)
• Delegate tasks to Project Coordinator and ensure assigned tasks are completed accurately and on time

Skill sets required:

• Ability to read civil, structural, architectural and MEP plans in detail
• Detail oriented, efficient and 'can do' attitude
• Strong verbal and written communication
• Strong and proficient use of computer systems, Microsoft Office Apps and software in general including:
• Blue Beam
• Ability to efficiently utilize company provided project management construction software – Procore

JOB TITLE: Tax Operations Manager

Location: Tampa, FL (50% onsite)

***With relocation package for non-local candidates, with the expectation that relocated hire is in Tampa on day one.

DIRECT HIRE

Summary:

Due to the ongoing growth and successful integration of our Tax Hub, which has been centralizing and streamlining tax operations to support the Latin America region, we are seeking a proactive, self-motivated, and collaborative professional to join our team in Tampa, Florida. This newly created role reflects our commitment to innovation and operational excellence across LATAM markets. You will oversee tax operations, leverage best practices and external experience, and champion technology-driven improvements for sustainable growth. Key responsibilities include documenting tax compliance, preparing tax returns, meeting both internal and jurisdictional deadlines, and enhancing compliance routines with advanced technology. You will work in partnership with the Senior Tax Manager and closely collaborate with local finance and business teams.

Position Responsibilities

• Oversee and supervise local country tax calculations across the LATAM region, ensuring accuracy and compliance.

• Manage all income tax accounting routines, including journal entries and balance sheet reconciliations.

• Review and ensure the integrity of income tax notes for local financial statements.

• Prepare and submit US GAAP tax reporting through OneSource Tax Provision (Taxstream).

• Develop insightful income tax projections, including ETR, deferred taxes, and cash tax flows.

• Lead transfer pricing documentation and legal entity profitability analysis.

• Champion SOX compliance by supporting reporting controls testing and documentation.

• Collaborate closely with the Senior Tax Manager, finance teams, and business partners to resolve tax requirements.

• Identify, research, and proactively resolve potential tax compliance issues.

• Drive process optimization and establish enhanced compliance procedures.

• Advance technology initiatives for effective calculations, models, dashboards, and analytics.

• Provide expert tax support for local business and educate partners on relevant legislative changes.

• Build a strong global network across tax, finance, customs, treasury, and legal teams.

• Work in partnership with operations, legal, country controllers, and other key stakeholders.

• Collaborate with external advisors to support critical tax positions.

• Stay current on evolving tax laws impacting company operations.

Main Qualifications

• Bachelor’s degree in accounting, Tax, Finance, or a related field, plus 8+ years of combined tax experience in public accounting or with a large multinational corporate tax department; or demonstrated equivalent experience/education.

• Expertise in tax regulations across Latin American countries.

• Understanding of LATAM business practices and tax complexities.

• Bilingual, in English and Spanish (written, reading, and speaking).

• Experience with large ERP systems, especially SAP and OneSource/Taxstream.

• Advanced Excel skills (including pivot tables, macros, and filters).

• Solid grasp of accounting and tax principles; direct experience preparing tax returns is preferred.

• Collaborative team player with strong communication skills and the ability to work independently.

• Excellent analytical and problem-solving abilities.

• Strong attention to detail, delivering accurate documentation and task completion.

• Proven ability to manage multiple projects and priorities in a time-sensitive environment; highly organized.

• Open to feedback and committed to ongoing professional development within the organization.

• Skilled at tackling ambiguous or unstructured problems, developing thoughtful solutions in consultation with the Senior Manager.

• Comfortable navigating complexities across cross-border and diverse teams and projects.

If you feel you are qualified with the required skills and if you are interested, please free to send your word version most updated resume TAILORED to the job description above to or call (212)804-7476.

Equal Opportunity Employer: Eclaro values diversity and does not discriminate based on Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.