Remote Control Manual Jobs in Usa

• Installation includes mounting wiring connecting testing configuring and programming instruments and devices.
• Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center.
• Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc.
• Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities.
• Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets.
• Ensures regulatory and compliance standards are met.

• Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.

• Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
• Ability to lead project teams, assume project supervisor role and develop action plans.
• Knowledge of Natural Gas and Electric Driven Gas Compressors.
• Knowledge of Gas and Fire Detection Systems
• Knowledge of Emergency Shut Down (ESD) Systems.

• Ability to interpret control system software for the purpose of diagnostic troubleshooting.
• Ability to pass electrical, electronic, and digital equipment troubleshooting tests.
• Ability to troubleshoot electrical, electronic, and pneumatic equipment.
• Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams.
• Ability to define specifications and requisition instrumentation and control equipment.
• Ability to define problems, collect data and draw conclusions.
• Ability to work independently and as a team member.
• Ability to communicate effectively and develop rapport.
• Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.)
• Ability to operate personal computer.
• Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems
• Knowledge of electric driven compressors may be required.
• Knowledge of electrical and electronic theory and principles
• Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same.
• Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS)
• Knowledge of Variable Frequency Drives (VFD)
• Knowledge of Human Machine Interface (HMI)
• Knowledge of Ethernet Communications Equipment
• Knowledge of Valves and Positioners
• Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards
• Knowledge of applicable regulatory requirements

• Knowledge of electronic, radio, digital, and remote-control theory.
• Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.)
• Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain.
• Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints.
• Ability to prepare technical reports and repair and maintenance records.
• Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations.
• Ability to directs and participates in installation of telecommunications equipment.
• Ability to interpret and implement gas measurement and SCADA device installation specifications.
• Ability to performs design programming installation and operation of electronic gas measurement and control systems.
• Inspects and tests facilities and equipment to identify malfunctions.
• Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment.
• Ensures installations and equipment comply with regulations.
• Ability to supervise MC&C projects.
• Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities

• Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.)

• Electronics & Communications Engineering

• ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months)

• Contribute to a team-centric work environment based on mutual respect and integrity
• Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers

Compensation details: 32.26-46.39

PIa35bdf77f43e-37344-40004115

Controls Engineer

The Controls Engineer is responsible for supporting and executing technical initiatives related to plant automation and control systems. This role involves maintaining electrical distribution systems, implementing control system improvements, assisting with equipment start-ups, maintaining automation documentation, and diagnosing control-related issues.

Key Responsibilities

• Lead and coordinate technical and strategic automation projects within a fast-moving manufacturing environment
• Assist with the deployment of new systems by configuring control modules and designing HMI interfaces
• Improve process control performance through initiatives such as advanced process control, alarm management, and operator interface enhancements
• Oversee the integration and functionality of PLCs, HMIs, VFDs, and related control systems
• Train plant personnel on the operation and functionality of newly installed or modified automation systems
• Support the standardization of control architecture, control logic, operational procedures, and system documentation including as-built drawings
• Act as the internal point of contact during system startups and commissioning activities performed by external automation vendors and integrators, ensuring proper documentation and knowledge transfer
• Develop, troubleshoot, and maintain automation documentation such as electrical schematics, functional descriptions, PLC programs, and SCADA configurations
• Diagnose and resolve automation issues within processing systems
• Lead or support automation improvement initiatives and optimization projects
• Provide mentorship and technical guidance to Instrumentation and Controls Technicians
• Perform additional responsibilities as required

Skills and Qualifications

• Ability to read, interpret, modify, and upgrade PLC programs (Rockwell experience preferred; Siemens experience beneficial), VFDs, and industrial networking equipment
• Experience updating and maintaining P&IDs and electrical or mechanical drawings (AutoCAD preferred)
• Strong analytical ability to evaluate workflows, redesign processes, and implement improved procedures or policies
• Excellent communication and interpersonal skills with the ability to collaborate across teams and departments
• Ability to assess and address training needs related to automation systems and operational processes
• Comfortable working with engineering drawings, manuals, and technical documentation
• Ability to manage uncertainty and adapt in a fast-paced operational environment
• Reliable attendance is required for this role
• Must have strong English reading, writing, and speaking skills

Job Title: Fabrication Quality Control (QC) Manager

Location: Long Beach, MS (Open to Relocation)

Employment Type: Direct Hire

Work Environment: 100% Onsite

Travel: 0–5% local travel to fabrication shop, office, or job sites as needed

Compensation

• Salary: $102,000 – $136,000 annually (based on experience)
• Bonus: Discretionary annual bonus

Position Summary

Wheeler Staffing Partners is seeking an experienced Fabrication Quality Control (QC) Manager to oversee and manage quality control and assurance processes for fabrication operations supporting industrial and process piping projects. This role provides technical leadership to ensure fabricated products meet industry standards, regulatory requirements, project specifications, and client expectations.

The QC Manager will work closely with estimating, engineering, and fabrication teams to ensure consistent quality, compliance with applicable codes, and continuous improvement in fabrication processes. The ideal candidate has experience within pipe fabrication, process piping, or mechanical subcontractor environments, along with strong knowledge of engineering drawings, fabrication methods, and estimating standards.

Key Responsibilities

Quality Control Leadership

• Develop, implement, and maintain quality control standards and procedures aligned with industry codes, project specifications, and client requirements
• Oversee daily inspection of machinery, equipment, fabrication processes, and working conditions to ensure compliance with quality and regulatory standards
• Prepare daily inspection reports and provide recommendations for corrective actions when quality issues are identified
• Establish and maintain quality assurance policies, procedures, and quality manuals supporting ISO 9001:2015 and ASME certification standards

Fabrication Quality Oversight

• Perform and document in-process inspections and verification for piping, plumbing, and sheet metal fabrication
• Ensure fabricated products meet project design specifications, applicable codes, and client requirements
• Inspect fabrication documentation and maintain records required for quality compliance and project documentation
• Prepare project turnover documentation and quality packages for completed work

Welding & NDE Management

• Test and certify welders and welding procedures according to applicable codes
• Maintain welder continuity logs in compliance with industry standards
• Coordinate and schedule contract Non-Destructive Examination (NDE) testing as required

Regulatory Compliance

• Ensure all quality control activities comply with industry regulations, codes, and project standards
• Monitor regulatory changes affecting fabrication and piping standards and communicate updates to internal teams

Data Analysis & Continuous Improvement

• Analyze quality metrics, trends, and performance data to identify opportunities for process improvement and defect reduction
• Conduct root cause analysis and support corrective and preventative actions
• Lead or support cross-functional quality improvement initiatives that enhance operational efficiency and product quality

Estimating & Bid Support

• Review Requests for Quotation (RFQs) and assist estimating teams with quality requirements and bid specifications
• Support cost estimating efforts related to fabrication processes and project requirements
• Utilize established KPI metrics to determine performance factors and labor hour calculations during estimate development

Cross-Functional Collaboration

• Partner with estimating, engineering, project planning, and fabrication teams to resolve quality concerns and implement corrective actions
• Support development of fabrication strategies for new projects or process improvements

Training & Team Development

• Provide training, coaching, and mentorship to quality control personnel and fabrication staff on quality standards and best practices
• Promote a culture of safety, quality, and continuous improvement throughout fabrication operations

Required Qualifications

• 5+ years of quality control experience within pipe fabrication, industrial/process piping, or mechanical subcontractor environments
• Experience working in a fabrication shop environment
• Ability to read and interpret engineering drawings, specifications, and fabrication documentation
• Experience with cost estimating related to fabrication and piping work
• Knowledge of pipe fabrication methods, materials, and project specifications
• Familiarity with process piping unit rates and estimating references such as ’73 Price Book or Page & Nations
• Strong analytical, documentation, and quality inspection skills
• Ability to manage multiple projects in a fast-paced fabrication environment

Preferred Qualifications

• Experience with modular estimating
• Experience utilizing KPI metrics for labor hour build-up and performance factors
• Certified Welding Inspector (CWI) certification preferred
• ASNT Level II certification in ASME B31 piping preferred
• Advanced proficiency in Microsoft Excel and Microsoft Office Suite

Skills & Competencies

• Strong leadership and quality management capabilities
• Advanced knowledge of fabrication quality standards and inspection procedures
• Strong analytical and problem-solving skills
• Excellent communication and documentation abilities
• Ability to collaborate across engineering, fabrication, and project teams
• High attention to detail and commitment to quality standards

Work Environment

This position operates primarily within a fabrication shop and office environment and may include exposure to industrial work settings, including equipment, welding operations, and fabrication processes.

Why Work with Wheeler Staffing Partners

Wheeler Staffing Partners connects skilled professionals with leading organizations across the United States. Our team is dedicated to helping candidates find opportunities that align with their expertise, career goals, and long-term professional growth while providing personalized support throughout the hiring process.

Title

Electrical Controls Engineer/Industrial Electrician

Report to

Facility/Engineering Director.

Job Summary

Individual must be able to perform design,engineering, and field start up responsibilities for System Integration in the Electrical Controls Industry. In addition, proven trouble

shooting skills are necessary.

Job Duties / Responsibilities

• Design, fabricate, and install PLC based process control panels.
• Troubleshoot and upgrade existing control panels.
• Maintain inventory of all PLC/HMIrack systems and programs.
• Work to install110V, 220V, and 480V 3 phase wiring.
• Real electrical schematics and wiring diagrams.
• Be able to troubleshoot 480V electrical control systems.
• Specify wiring and motor controls for 480V systems.
• Install power distribution and protection systems.
• HMI Interfaces
• Temperature Controllers and Transmitters
• Pressure Transmitters
• 4-20ma Loop Controllers
• Burner Controllers and Actuators
• Industrial pH Meters
• Level Transmitters
• Flow Meters
• Variable Frequency Drives

Work Conditions

• Physically available to lift up to 50lb.
• Exposure to hazardous conditions associated with the Company
• 24/7 availability may be required.
• Manual dexterity and the ability to remain standing, crouching, and bending for long periods of time
• Overtime as needed.

Job Requirements

• AS, BSEE, BSEET, or technical degree.
• 3-5 years of industry experience.
• Review projects including quotes, job specifications, and resolve any quote to job specifications differences.
• System Architecture including non-standard material and control pane lpower requirements/distribution.
• Review specifications and standard practices – inclusive of the internal hardwired and logic standards, general specifications and scope of work.
• Design requirements which include establishing non-standard designs, generating system map layouts, generating a sequence of operations, reviewing cycle time

studies and dimension switch layouts, generation of design packages, design logic, enter logic, and the design of Smart Displays.

• Material responsibility includes advance material order, specifying Mod Box material, specifying Panel material, writing Mod Box EBMs and writing panel material EBMs.
• Assisting with installation • Debugging with no additional support • Launchand Standby
• As Builts

Technology Requirements

• RSLogix 5, 5000
• RS Networx for DeviceNet, ControlNet, EtherNet IP
• DriveExecutive, DriveExplorer

• PanelBuilder PDS, 1400e, 32
• RSView Studio
• Trouble Shooting PID Loops
• Calibrating Process Control Equipment
• Microsoft Office Suite

Benefits

• Competitive Compensation

- 401(k)

• 401(k) Matching
• Medical, Dental,and Vision Benefits
• Paid Time Off and Paid Holiday’s

Classification

Full Time Position

Maintenance Tech III (Electrical & Controls)

About Shaw Bakers

At Shaw Bakers, we love mixing renowned French techniques with state-of-the-art process innovation to bring delicious baked goods to our local community through our legendary local Cafes, as well as national retail partners across North America. We are an aggressive, fast-growing company with a full pipeline of exciting new projects, products, and employment opportunities.

About The Role

We are looking for a reliable and experienced Mechanical & Controls Technician, capable of installation, maintenance, troubleshooting, minor programming, and repair of electrical, mechanical, and automated control systems in an industrial or manufacturing environment. This position combines electrical, mechanical, and controls knowledge, ensuring systems function within design parameters safely and efficiently at our Shaw Bakers’ manufacturing facility in San Leandro.

Core Responsibilities

Responsibilities and essential job functions include but are not limited to the following:

• Controls & Electrical Duties: Troubleshoot and repair electrical and electronic systems, motor controllers, variable frequency drives (VFD), servo systems, and motor starters. Diagnose PLC alarms and repair or replace sensors, actuators, input/output modules and other control devices as required.
• Vendor Coordination: Point of contact with vendors for PLC hardware/software issues or upgrades, and general mechanical and electrical equipment repair.
• Mechanical Duties: Inspect, maintain, and repair mechanical systems, including motors, pumps, compressors, conveyors, production machinery, and related equipment. Perform diagnostic tests, identify faults, and implement repairs or part replacements. Ensure preventive maintenance procedures are followed to minimize downtime.
• Documentation & Compliance: Maintain detailed records of maintenance, diagnostics, calibrations, and system modifications. Prepare technical reports, schematics, and manuals. Ensure all work adheres to safety, environmental, and regulatory standards.
• Training and Support: Providing technical expertise and hands on training and development for operators and maintenance techs on an ongoing basis.
• Proactive Engagement: Perform area walkthroughs and inspections of the facility and equipment to identify and resolve issues proactively.
• Comply with Health & Safety Policies: Follows and ensures health and safety policies are always the first task.
• Collaboration: Effectively collaborate with other departments and vendors to develop, plan, and implement projects to improve company efficiency, safety, and overall throughput.

Skills & Experience Required

• 5+ years of Industrial Control Systems Maintenance required, including hands-on experience with motor controls, VFDs, servos, DeviceNet, and PLC troubleshooting.
• 5+ years of Mechanical Maintenance, including troubleshooting, from a manufacturing or industrial environment required.
• Technical Skills: Ability to read and interpret electrical schematics, mechanical blueprints, wiring diagrams, and pneumatic/hydraulic schematics. Proficient with diagnostic tools. Strong troubleshooting skills for both mechanical and electrical systems.
• Knowledge of automation software and HMIs a plus.
• Experience with Ladder logic programming a plus.
• Experience reporting daily metrics in a CMM.
• Ability to operate in a rapidly changing environment.
• Excellent communication and interpersonal skills.

About GEMCO
Founded in July of 2014 and headquartered in Indianapolis, Indiana, GEMCO Constructors is a national mechanical, electrical, plumbing, building automation systems, and service contractor providing comprehensive design and build solutions throughout the United States. GEMCO operates coast to coast, holding engineering and construction registrations, licenses, and certifications in more than 30 states.

Position Summary
The Traveling HVAC Startup Controls Foreman is responsible for the supervision, commissioning, and troubleshooting of new and existing mechanical systems in commercial and industrial buildings. This role ensures that all HVAC and control systems are installed, tested, and functioning according to project specifications, building codes, and client expectations. The Foreman provides leadership in the field, supports apprentices and technicians, and collaborates with project managers and engineers to ensure safe, efficient, and successful project delivery. This is a 100% travel job.

Primary Responsibilities and Duties

• Commission and start up commercial and industrial HVAC equipment, including refrigeration systems, air handling units, temperature controls, and heat pumps.
• Troubleshoot, diagnose, and repair existing HVAC and control systems to ensure proper operation and efficiency.
• Install and pressure test refrigeration piping systems and verify connections meet specifications.
• Ensure all startup and commissioning documentation, including service work orders and forms, are accurately completed and submitted in a timely manner.
• Coordinate work activities with other trades and departments to avoid conflicts and maintain project schedules.
• Provide on-site supervision, direction, and training to apprentices and technicians assigned to startup and service tasks.
• Monitor job progress and report status updates to project managers and leadership.
• Enforce company safety protocols and maintain a clean, organized, and hazard-free job site.
• Act as a technical resource for clients and ensure customer satisfaction through professional communication and service delivery.
• Perform additional duties as required to support project and company objectives.

Traits/Competencies

• Strong technical knowledge of HVAC systems, controls, and refrigeration.
• Flexibility to adapt to changing job requirements and site conditions.
• Decisiveness in solving technical and operational issues.
• Dependability in leading field teams and ensuring work completion.
• Resourcefulness and initiative in troubleshooting and system optimization.

Why GEMCO?
This is an opportunity to lead plumbing crews on significant construction projects with a nationally recognized contractor. GEMCO offers competitive pay, comprehensive benefits, and a team-oriented culture built on safety, innovation, and professional growth.

Requirements

• Minimum 5 years of refrigeration / service technician experience with preventative maintenance, diagnostics and repairs of Commercial and / or Industrial HVAC Equipment, Systems and Buildings
• Universal or type 2/3 Refrigeration Certification required
• Must maintain a neat appearance and take pride in quality work
• Requires excellent customer service and communication skills
• Must be safety conscious, well organized and have good verbal / writing skills
• Must be able to analyze, troubleshoot, help prepare quotes and repair refrigeration for air handling systems and equipment including boilers, chillers, exhaust fans, controls, refrigeration, heat pumps, steam systems, humidifiers, rooftop, VAV, etc.
• Must be drug free and have a clear current driving record with valid license

Physical Demands  

• The position requires standing, bending, reaching, lifting a majority of the workday.
• Lift repetitively 50 pounds.
• Climb ladders.
• Must be able to work at heights of up to 100 feet or more.
• Work from scaffolding and lifts.
• Drive a company vehicle (truck).
• Capable of driving long distances (up to 14 hours per day) between job sites.
• Other manual labor as required.

Summary

Why GEMCO

Join a fast-growing national contractor offering competitive pay, comprehensive benefits, and the opportunity to make a lasting impact on company success.

Benefits and Perks

• Company paid benefits package
• Health Savings Account with company contribution and matching
• 401(k) with company match
• Paid Time Off
• Annual bonus
• Holiday bonus
• Anniversary bonus program
• Phone allowance
• Solo hotel room on travel, usually with kitchenette
• Company vehicle truck or van based on role

We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.  

JOB SUMMARY

The position is broadly responsible for the development of electrical and process control systems for equipment used in the Food Processing, Pharmaceutical, Chemical, Water Treatment, Manufacturing and other industries.

Essential Functions

Essential Function

Understanding of customer’s specific application and process requirements

Developing instrumentation lists, electrical wiring schematics, Bill of Materials, control panel layout, one line and point-to-point wiring diagrams.

PLC and SCADA programming

Preparing budgetary cost estimates

Supervising fabrication of control systems, performing factory and site checkout

Managing and physically participating in equipment and systems installation and startup

Developing and maintaining project documentation: drawings, Bill of Materials and equipment IOM manuals

Providing post-installation troubleshooting and technical support

Required for All Jobs

• Performs other duties as assigned

• Complies with all policies and standards

QUALIFICATIONS

Education

Education Level Education Details Req/

Pref

Associate's Degree

Bachelor's Degree Mechanical, chemical, or electrical engineering Required

Work Experience

Experience Experience Details Required/

Preferred

1-3 years

4-6 years

7-9 years

10+ years Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, PLC/SCADA programming, technical writing, and communication skills Required

Knowledge, Skills and Abilities

Industrial gases industry experience would be helpful. Good English writing and speaking skills are required.

Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, technical writing, and communication skills

Ability to read, understand and create electrical drawings, block diagrams and P&ID’s

Experience in process automation, instrumentation, and PLC/SCADA systems

Comprehensive experience programming Allen-Bradley CompactLogix, ControlLogix, WonderWare and Siemens PLCs and HMI

Working knowledge of motors, blowers, pumps, and compressors

Familiarity with NEC and NFPA standards

Licenses and Certifications

Licenses/Certifications Licenses/Certification Details Time Frame Required/

Preferred

PHYSICAL DEMANDS/WORKING CONDITIONS

Physical Demands Category:

Physical Demands

A thorough completion of this section is needed for compliance with legal standards such as the Americans with Disabilities Act. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Physical Demand N/A Rarely Occasionally Frequently Constantly Weight

Stationary Position X

Move/Traverse X

Stationary Position/Seated X

Transport/Carrying X

Exerting Force/Pushing X

Exerting Force/Pulling X

Ascend/Descend X

Balancing X

Position Self/Stooping X

Position Self/Kneeling X

Position Self/Crouching X

Position Self/Crawling X

Reaching X

Handling X

Grasping X

Feeling X

Communicate/Talking X

Communicate/Hearing X

Repetitive Motions X

Coordination X

Travel Requirements

Estimated Amount Brief Description

50% Extensive domestic travel will be required

Position Summary:

Perform broad support engineering functions for engineering group in assistance to project and product related taskings from Engineering Management for the thermal product line. Enable successful task completion to produce technical value from the company.

Applies knowledge and understanding of process, mechanical, electrical, and civil engineering to form documents, calculations, and drawings. Manages projects on multiple technologies, and contracts as required. Aids in procurement, document control and other technical administration functions. Develops new suppliers and supply philosophies for thermal products.

ESSENTIAL FUNCTIONS

• Aids in growth of company with a focus on wastewater business line technical services, ranging from Biosolids treatment to conveyance and disposal management.
• Engages clients in meaningful discussions about their most critical issues and translates those discussions into opportunities to deliver complete Project solutions. Captures technical notes.
• Actively participate in pursuit decisions, and in proposal and pricing development.
• Engage and develop relationships with key Industry partners including Vendors, Contractors and Licensing agreements that can help advance position in the marketplace.
• Responsible for collecting all regulatory required data, compiling regulatory reports, maintaining files of analysis results and regulatory reports and coordinating research.
• Manage the technical aspect of projects through the engineering process by assigning work, controlling standards, and evaluating results while controlling engineering costs. Reporting on any variations to management.
• Assist in developing Vendor document requirements, Equipment submittals, Drawing Packages, O&M Manuals.
• Works in close collaboration with the Engineering Team and Product Manager.
• Troubleshoots and/or reviews wastewater treatment processes and facility designs; evaluates process technologies; performs initial data gathering, analysis of the existing systems, initial process design.
• Develops and maintains new procurement philosophy for the thermal product line.
• Develops alternative suppliers for industrial equipment.
• Aids in process hazard assessments, safety in designs.
• Aids in generating new ideas for product improvement, reliability, and cost reduction.
• Forming, maintaining, and improving standard designs of technologies for repeatability
• Aids in management of change planning.
• Responsible for managing documents in the document control process.
• Develop and provide ISA data sheets, engineering descriptions, preliminary/final engineering designs, and recommendations for process upgrades.
• Work across teams that provide solutions to client’s needs.
• Performs any other duties related to Technical/Engineering as directed by the Senior Project Engineer or Director of Engineering.
• Assists in application design
• Tracks changes of design (manages change) on project documents such as P&ID, PFD, Mechanical Design Drawings, Electrical Design drawings.
• Assigns and tracks work required for project execution to a wide range of professionals (Mechanical Design, Electrical Design, Outside Vendors)

Minimum Requirements:

• BS Mechanical, Civil, or Chemical Engineering degree preferred, others suitable with commensurate experience.
• 7+ years of experience working with water and/or wastewater treatment plants and equipment
• Excellent proficiency to read, write, and understand the English language.
• Climb stairs and ladders, comfortable working at heights.
• Travel up to 25%, potential.
• >2 years of experience in working and interacting with customers and vendors.
• >2 years of experience in developing budgets, schedules, plans, and forecasts.
• Skilled in MS Excel, MS Word, MS Project, MS PowerPoint, and AutoCAD products.

Desired Skills:

• Knowledge of Engineering Document Control standards
• Experience with use of management of change controls for engineering documentation
• 5+ years’ experience in Project Management for Industrial Equipment
• 5+ years forming process engineering documents such as P&IDs, Equipment Datasheets, Functional Descriptions, Submittals and Project Schedules, Document Indexes etc.
• Experience in speaking effectively before groups of customers or employees of an organization.
• Experience defining problems, collecting data, establishing facts, and drawing valid conclusions.
• Experience in Supply Chain, Supplier evaluation, Negotiation, and supplier accountability
• Experience using Smart Sheets

Kelly is hiring for a Specialist - Quality Control for a 12-month contract role at Chesterfield, MO 63017 with our prestigious client.

Job Title: Specialist - Quality Control/ Quality Coordinator

Primary Location: 16401 Swingley Ridge Rd Ste 700, Chesterfield, MO 63017

12-month contract - Onsite role

Shift: 8:00 AM to 4:30 PM

Pay rate: $30-38.50/hr.

Summary: The Laird Chesterfield site is seeking a Quality Coordinator. Laird designs, develops and delivers industry leading solutions that protect electronics to enhance the performance and reliability for our customers. Our global organization of world-class scientists and engineers provide solutions to our existing and future customers’ complex problems. A successful candidate will lead the Chesterfield location’s Quality Management System requirements as well as key improvement programs, including support for automotive and aerospace manufacturing sites across Laird. This specific location is not a manufacturing site but includes processes and activities such as Sales, Quoting, Customer Service and some Product Design. Other activities related to quality include but are not limited to system implementation, standardization, and automation. The Quality Coordinator will ensure that the organization’s Quality Management System conforms to internal, Quality Standard requirements (ISO 9001 and others), customer requirements, and any applicable regulatory/legal requirements. The role will collaborate with site leadership, business leadership, and Laird Quality Leaders to ensure compliance and drive continual improvement of the Chesterfield QMS. This position will report to the Laird North America Quality Leader.

RESPONSIBILITIES

• Implementation, support, and improvement of the Quality Management System (QMS) for this site.

• Maintain site metrics and communicate with business and quality leaders on site quality performance; review recommend areas for focus and attention

• Support QMS interfaces with other Manufacturing sites; this location is a remote support location for other sites

• Maintain and improve conformance to applicable Quality Standard requirements including ISO 9001, IATF 16949, AS9100 etc.

• Coordination of and participation in QMS audits by 3rd party Certification Bodies (CB); act as liaison between site team and CB

• Coordinate, maintain and improve internal audit program in compliance with Quality Standards and any relevant customer specific requirements

• Coordinate Management Review activities for Chesterfield and support of other manufacturing sites

• Conduct training on QMS procedures as required and maintain associated records

• Improve and maintain documented information control activities, including revision of the Quality Manual, development of document reviews, and control of related records

• Lead Corrective Action activities; monitor completion of assigned investigations and corrective actions; conduct verification of effectiveness

• Lead investigations on internal and 3rd party NCs; improve and maintain employee competence in problem solving

• Coordinate and track continual improvement projects; evaluate effectiveness to customer or business goals/impact

• Analyze data and trends in support of QMS processes and other site activities such as customer service, customer satisfaction, complaints, or quoting

• Support the Document Change Management process for the Chesterfield site

• Additional administrative responsibilities and support for other functions at the site as needed

REQUIREMENTS

• Proficient knowledge of ISO 9001 (minimum), IATF 16949 and AS9100D desirable

• Good communication skills, both written and oral.

• Ability to maintain accuracy and attention to detail.

• Ability to work as an individual contributor or in a team environment.

• Experience performing Internal Audits

• Experience with CAPA systems

EDUCATION / EXPERIENCE

• Bachelor’s degree in a related field (Quality Mgmt., Operations, Manufacturing Mgmt., etc.)

• Minimum 7-10 years’ experience working within and/or managing a QMS certified to ISO 9001:2015 (IATF 169949 desired)

• Lead or Internal Auditor certification for ISO 9001:2015 and/or IATF 16949:2016 (desired)

• Ability to understand relevant industry controls and requirements in support of manufacturing support processes to achieve and maintain compliance with relevant Standards

• Leadership and project management skills to drive improvement projects

• Root Cause/Corrective Action training and experience

• Proficiency in Microsoft Office applications and any other relevant systems for the management of documents, corrective actions, projects, etc.

If you feel this role interests you, feel free to apply or refer someone who would be a good fit.