Rear Toe Link Bushing Jobs in Usa

Position Summary

The CDL Truck Driver will be responsible for the safe and efficient operation of rear load, front load, side load, and roll off trucks, while providing prompt, courteous and complete waste removal services for customers on designated routes. The Driver safely maneuvers assigned vehicle in residential or commercial environments; navigates high traffic and congested roadways, driveways, alleyways, and lots and provides excellent customer service. The driver must have the ability to make positive contributions to their surrounding communities on behalf of Casella.

New Starting Pay Rate for Qualified Candidates!

Drivers at Casella participate in a Career Pathways Program that offers exceptional Advancement Opportunity, Regular Merit Increases, and Safety Bonus Incentives.

Key Responsibilities

* Performs pre/post trip inspections of assigned vehicle in accordance with Casella safety standards as well as state and federal regulations; maintains appearance of truck in accordance with company standards.

* Exhibits dedication to performing safe operation of rear load, front load, side load, roll off trucks on streets, highways, customer sites, and construction sites.

* Provides a distinguishably different level of service through courteous interactions with all customers and provides service in a timely manner.

* Exhibits a positive attitude towards company, customer and municipal goals.

* Completes all assigned company and federally mandated paperwork accurately.

* Empties all receptacles Cleans area around accidental waste spills.

* Completes assigned route sheet for one Line of Business (LOB).

* Attends and participates in all scheduled training programs and meetings as required by Casella or Manager.

* Notifies Dispatch of any service interruptions, incidents, accidents, property damage, or unsafe situations; exhibits an ability to be observant and aware of all surroundings at all times.

* Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values.

Career Path Definitions & Distinctions

Apprentice: Completes training for Helper safety (Rear Load Residential), customer service training and required training to safely operate a commercial motor vehicle while providing service to customers in their line of business. Obtains CDL Permit.Class I Driver: Demonstrates the ability to complete assigned route sheet for 1 Line of Business as well as ability to complete tasks necessary as to one of the following: Rear load, front load, side load, roll off trucks.Class II Driver: Demonstrates the ability to complete assigned route sheet for 2 Lines of Business as well as ability to complete tasks necessary as to two of the following: Rear load, front load, side load, roll off trucks. Shows a development of improvement of communication skills with customers and coworkers. Exhibits evidence of increased knowledge of the company and industry. Illustrates an ability to be a mentor to new employees.Class III Driver: Demonstrates the ability to complete assigned route sheet for 3 Lines of Business as well as ability to complete tasks necessary as to three of the following: Rear load, front load, side load, roll off trucks. Demonstrates an increased effort of providing positive contributions to the community on behalf of the community. Displays a capability to participate in training and development of new employees.Lead Driver: Demonstrates the ability to develop driver training plans and coach employees to achieve successful outcomes. Exhibits the ability to complete assigned route sheets for all lines of business. Provides courteous customer service and communicates professionally with customers and employees. Actively participates in the company's progress with the career paths program and helps drivers to move up in their careers.

Education, Experience & Qualifications

The successful candidate will have a High School Diploma or GED, must be at least 18 years of age, hold a valid Class A or B CDL License and must be legally eligible to work in the United States. The physical ability to handle objects more than 50lbs frequently throughout the day and work under many different weather conditions is expected.

Excellent verbal and written communication skills, effective listening and problem-solving skills, and dedication to providing excellent customer service is desired. It is also important that the candidate has demonstrated the ability to work as part of a team in a collaborative environment.

This position requires successful completion of pre-employment testing, including a drug screen.

Attributes

Positive, team-oriented individual who is disciplined, dependable, determined, focused on delivering excellent customer service, and is open to personal and professional training and development.

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $34.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 11:30 am – 8:00 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Mobile MT3” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in related field preferred
  
  
• Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team
  
  
• Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Other Service Island support - SBTIII trained - SBT220 within 180 Days
  
  
• Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year
  
  
• Other Tire & Wheel safety - TW220 within 90 Days
  
  
• Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air qualified - (BA220&BA298) within 90 Days
  
  
• Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25)
  
  
• Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days
  
  
• Other A/C recycling/recovery certified - CF609 within 90 Days
  
  
• Other A/C qualified - (AC220&AC298) within 180 Days
  
  
• Other HD electrical trained - DR208 within 90 Days
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Act as a mentor for the Mobile Technician II level
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 4 days ago (3/16/2026 5:33 PM)

Requisition ID 2

Location (Posting Location) : State/Province AL

Location (Posting Location) : City MOBILE

Location (Posting Location) : Postal Code 36618

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000127

Min Pay USD $32.00/Hr.

Max Pay USD $32.00/Hr.

Position Description

Torque by Ryder is immediately hiring a Permanent Full-Time Experienced Mobile Diesel Technician to support our Truck Fleet in Raleigh, North Carolina

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $36.00 per hour based on experience
  
  
• Retention Bonus: $2000 paid every quarter within the first year.
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominiqueor text “Raleigh Mobile” to 9 to speak with your recruiter today.

At Ryder, we offer outstanding benefits:

• 
  
• Generous Paid Time Off
  
  
• Medical, Dental and Vision Insurance effective 30 days from hire date
  
  
• Life Insurance and Disability Insurance Options
  
  
• 401K Savings Plan with Ryder matching contributions
  
  
• Discount on purchase of Ryder Common Stock
  
  
• Employee Discounts on Automotive, Mobile plans, Travel and Hotels
  
  
• Accredited Tech School Tuition Reimbursement
  
  
• PPE & Uniforms provided at no cost
  
  
• Paid Job training and development
  
  
• Employee & Customer Referral Bonus program
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 3 days ago (3/17/2026 4:39 PM)

Requisition ID 2

Location (Posting Location) : State/Province NC

Location (Posting Location) : City RALEIGH

Location (Posting Location) : Postal Code 27616

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $36.00/Hr.

Max Pay USD $36.00/Hr.

Hours of Work :

Days Of Week :

Work Shift :

Job Description :

Methodist Richardson Medical Center is seeking a full time Night Registered Respiratory Therapist to join its TEAM. This position will be located in the Bush / Renner Campus.

Your Job:
The Registered Respiratory Therapist (RRT) is responsible for a variety of therapeutic and diagnostic procedures including ABG, PFT’s, and various forms of ventilator support, oxygen and aerosol therapy, bronchial hygiene therapy and airway maintenance.  You will be expected to be proficient with the respiratory assessment and respiratory treatment of both adults and neonates. These procedures are performed under the indirect supervision of the department’s medical director, according to departmental policies and procedures.  The RRT must demonstrate the knowledge, skills, understanding and ability to care for patients of all age groups; and be sensitive to the diverse and unique needs of patients based on age, sex, race and culture.

Your Job Requirements:

• Graduate of an accredited Respiratory Care Program
• Current Basic Life Support certification required
• Current Advanced Cardio Life Support certification required
• NRP, Pediatric Advanced Life Support — must obtain within 1 year of hire
• Currently licensed in good standing as a Respiratory Care Practitioner by Texas Medical Board
• Registered by the National Board for Respiratory Care
• New Graduates are welcome to apply!

Your Job Responsibilities:

• Performs respiratory therapeutics to include oxygen administration and weaning, aerosol and humidity therapy, IPPB, Incentive Spirometry, airway maintenance, bronchial hygiene, chest physiotherapy, CPR and mechanical ventilation.   
• Performs and reports prescribed cardiopulmonary diagnostic procedures to include arterial blood gas analysis, pulse oximetry, pulmonary function studies, and electrocardiograms.
• Prepares a treatment evaluation to include a bedside respiratory physical assessment, patient interview and a review of patient’s medical record.
• Perform appropriate actions using critical thinking skills.
• Must be able to interpret the CXR, ABG, and PFT’s when reviewing patient data.
• Assembles, checks, operates and troubleshoots all cardiopulmonary equipment such as artificial airways, ventilators, oxygen analyzers, oxygen delivery devices and blood gas analyzers.
• Participates in tasks related to infection control, safety and quality assurance.
• Performs required cleaning and maintenance of all cardiopulmonary equipment and work areas.
• Utilizes appropriate customer scripting as evidenced by observation and improved patient satisfaction.
• Perform other job duties as required

• Magnet®-designated hospital
• 150 Top Places to Work in Healthcare by Becker’s Hospital Review, 2023
• Top 10 Military Friendly® Employer, Gold Designation, 2023
• Top 10 Military Spouse Friendly® Employer, 2023
• Level III Neonatal Intensive Care Unit
• Level III Trauma Center

$28 / Hour

Job Status/Type: Full-time, year-round

Position Level:  Mid-Level

Shift/Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs

This Full Time with Benefits position performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions. Perform water tests and maintain proper water quality. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job.

 Benefits:

• 3 weeks paid vacation (6 sick days, 11 paid holidays)
• Several medical coverage options to fit your needs best
• 401K match
• FREE entry to ALL our parks and water parks!

Perks:

• Complimentary tickets for friends and family
• Discounts on food and park merchandise
• Full-time employee events and gatherings

The schedule for this position from May 15th until September 15th is as follows(subject to change due to business needs): 

Monday: 7:00am - 3:30pm

Tuesday: Off

Wednesday: Off

Thursday: 12:00pm - 9:30pm

Friday: 12:00pm - 9:30pm

Saturday: 12:00pm - 9:30pm

Sunday: 7:00am - 3:30pm

Off-season hours are Monday through Friday 7:00am-3:30pm

• Maintain water quality in pools, ponds and fountains.
• Backwash filters, clean pump screens and baskets, monitor water quality and perform water tests.
• Perform daily inspections and repairs on attractions.
• Able to dig up water lines for repairs as needed as well as pool repairs as needed.
• Caulking of pools and slides as needed.
• Maintain inventory of equipment

• Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned; taking corrective actions as issues are identified. Inspections are visual as well as auditory.

• Performs scheduled and unscheduled preventative maintenance, inspects, repairs and tests amusement rides and related equipment. This may include repair or replacement of major components such as gears, chains, sprockets, pneumatic cylinders, hoses, brakes, clutches, wheels, bearings, gearboxes, springs, or a wide variety of other mechanical devices.
• Trouble shoots a variety of mechanical, pneumatic systems and takes appropriate corrective actions.
• Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner.
• Communicates the status of assigned rides both verbally and in written format.
• Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Works safely and efficiently on all assigned tasks, coordinates with others as necessary to achieve desired results.
• Reads, understands and applies information from manufacturer's manuals for service, repair and or component replacement.  Accurately reads blueprints (mechanical, pneumatic).
• Notify maintenance of equipment problems, building repairs, etc. necessary to ensure safe and efficient operation.
• Use soldering, hand, and power tools to perform tasks and repairs.
• Provides guest service according to Six Flags standards when serving the guest or working with subordinates, including initiating guest interactions, answering questions and giving directions.
• Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags Entertainment Company Safety guidelines and requirements and reports all unsafe or unusual conditions to supervision.

• High school diploma, GED, or equivalent.
• 2 to 4 years previous experience in mechanical maintenance, preferably in an industrial or amusement park setting.
• Working knowledge of basic mechanical principles such as gear ratios, torque, proper use of common hand tools, common mechanical nomenclature, etc.
• Familiarity with common types of bearings, bushings, couplers, shafting and similar power transmission components.
• Demonstrable knowledge of the fundamental principles of pneumatic systems.

• CPO certification after 1 year.
• Pesticides license within the first year.

• Ability to work cooperatively with others in a fast paced and sometimes stressful environment.
• Ability to work safely and effectively while elevated on ladders, platforms, or other structures at heights up to 200 feet above ground.

Job Status/Type: Full-time

Shift/Schedule requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs.

The Ride Maintenance Mechanic performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions. Areas of responsibility include (but are not limited to) maintenance of: gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job.

Benefits:

• 3 weeks paid vacation (6 sick days, 8 paid holidays)
• Several medical coverage options to fit your needs best
• 401K match
• FREE entry to ALL Six Flags parks

Perks:

• Yearly maintenance appreciate week celebration
• Complimentary tickets for friends and family
• Discounts on food and park merchandise
• Full-time employee events and gatherings

• Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned; taking corrective actions as issues are identified. Inspections are visual as well as auditory.
• Performs scheduled and unscheduled preventative maintenance, inspects, repairs and tests amusement rides and related equipment. This may include repair or replacement of major components such as hydraulic cylinders, gears, chains, sprockets, pneumatic cylinders, hoses, brakes, clutches, wheels, bearings, gearboxes, springs, or a wide variety of other mechanical devices.
• Trouble shoots a variety of mechanical, pneumatic, hydraulic and electrical systems and takes appropriate corrective actions.
• Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed, and submits required paperwork to supervision in a timely manner.
• Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Works safely and efficiently on all assigned tasks, coordinates with other as necessary to achieve desired results.
• Reads, understands and applies information from manufacturer's manuals for service, repair and or component replacement.  Accurately reads blue prints (mechanical, pneumatic, and hydraulic).
• Provides guest service according to Six Flags' standards when serving the guest or working with subordinates, including initiating guest interactions, answering questions and giving directions.

• High school diploma, GED, or equivalent.
• Must be at least 18 years of age.
• 2 to 4 years of verifiable experience in mechanical maintenance, preferably in an industrial or amusement setting.
• Working knowledge of basic mechanical principles such as gear ratios, torque, proper use of common hand tools, common mechanical nomenclature, etc.
• Familiarity with common types of bearings, bushings, couplers, shafting and similar power transmission components.
• Demonstrable knowledge of the fundamental principles of either pneumatic systems or hydraulic systems; preferably both.
• Carpentry experience a plus
• Ability to work cooperatively with others in a fast paced and sometimes stressful environment.
• Ability to work safely and effectively while elevated on ladders, platforms, or other structures at heights up to 300 feet above ground.
• Ability to work nights, weekends and holiday periods to meet business needs.
• Valid State Driver's License required.

The City of Clemson provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Under regular supervision, performs a variety of skilled maintenance work, and operates a variety of trucks and equipment in the operation, repair, maintenance, and replacement of City utility facilities and systems.

* Drives truck, Jet Vac truck, dump truck, service truck with excavator trailer, or truck equipped with a hydraulic lifting device to transport the load to disposal area.
* Performs manual labor for water and sewer line installations and repairs, manhole maintenance, fire hydrant maintenance, water and sewer taps, and installation of water and sewer pipes with appurtenances.
* Operates tractor with mowing, bush hog, and other similar type attachments.
* Receives written work orders or verbal instructions from the Equipment Operator or Utilities Foreman.
* Replaces worn or damaged parts, such as hoses, wiring, and belts, in machines and equipment, such as truck, backhoe/loader, dump truck, trencher, and other equipment.
* Hand washes vehicles.
* Assembles tools, equipment, and materials; performs specific work tasks on the city's water and sewer system as instructed.
* Provides on-call duty coverage during non-working hours as per duty roster, approximately 6-7 times per year.
* Operates light and medium-sized construction and power equipment.
* Performs all duties in conformance to appropriate safety and security standards.
* Performs required labor involved in construction and maintenance projects as part of a crew, including ditch digging, manhole and line cleaning, main and pipe repair, and backfilling.
* Is required to fill in other positions in the department.
* Reports unsafe conditions or defects in equipment.
* Must be able to discern possible threats to public health safety for water and sewer problems, repairs, and installations.
* Must be able to use good construction/installation techniques/processes for water and sewer line installations and repairs.
* Reports all accidents and incidents (including near misses) as soon as they occur.
* Works according to good safety practices as posted, instructed, and/or discussed.
* Follows safety rules and regulations and uses personal protective equipment.
* Refrains from any unsafe behavior or act that might endanger self or fellow worker(s).
* Participates in safety training, makes suggestions as necessary; serves on committees or inspection teams when appropriate.
* Wears seatbelt while driving to and from job sites.
* Operates a variety of machinery, motorized vehicles, and equipment, including dump truck, pickup truck, utility truck, jetter/inductor truck, man lift, generators, mobile radio, ditch witch, etc.
* Uses a variety of tools and supplies including saws, pumps, compressors, sanders, common hand and power tools, shovels, wrenches, detection devices, etc.

High school diploma or equivalent supplemented by one (1) year of experience relating to utility construction, maintenance, or repair; or an equivalent combination of education, training, and experience that provides the required knowledge, skills, and abilities.

Must possess a valid state driver's license. Must have a valid South Carolina driver's license and commercial driver's license certification with tanker and airbrake endorsements, or the ability to obtain one. Must have a minimum Class "C" SC Voluntary Wastewater Collection License. Must possess an Asbestos III Workers license from SC LLR. The employee is required to abide by all City of Clemson, State, and Federal Safety Laws.

Applications accepted online at Applications accepted until March 13, 2026. The City of Clemson provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

The City of Clemson is an equal opportunity employer.