Quadrants Trigonometry Functions Jobs in Usa

• 
  
• Prevent and control corrosion in hull, topside, interior, and deck surface coating systems with Navy ships.
  
• Application the regulations of the Clean Air Act, NESHAP, EPA, OSHA, ASTM 718F, and the Material Data Safety Sheet with regard to VOC compliance.
  
• Conduct surveys of underwater hull, topside, interior, and decks to determine the effectiveness of specific corrosion control systems such as attendance at Surface Ship Availabilities.
  

• 
  
• US Citizenship.
  
• Ability to obtain and maintain Base Access and an Active Secret
  
• Graduate of high school, trade school, industrial school, or correspondence school in which credits were received in algebra, plane geometry, trigonometry, and physics.
  
• Five (5) years of experience in the prevention and control of corrosion and in hull, topside, interior, and deck surface coating systems with Navy ships.
  
• Five (5) years of experience with the application of the regulations of the Clean Air Act, NESHAP, EPA, OSHA, ASTM 718F, and the Material Data Safety Sheet with regard to VOC compliance.
  
• Familiar with corrosion control policy guidance and technical support at the Program level for NAVSEA organization, for example, in support of PEO SHIPS PMS 400D with regards to AEGIS Class (DDG-51 and CG-47) Ships.
  
• Five (5) years experience Conducting surveys of underwater hull, topside, interior, and decks to determine the effectiveness of specific corrosion control systems such as attendance at Surface Ship Availabilities.
  
• Experience reviewing and providing technical guidance on specifications being repaired for corrosion control systems to be installed on surface ships, ship construction, maintenance, and repair.
  
• Experience providing technical guidance concerning the techniques involved in the inspection of preparation and application of corrosion protection systems.
  
• Minimum Requirement: Must be certified by National Association of Corrosion Engineers. Must provide documentation at time of award.
  

• Manages all shop resources by assigning trades personnel to Foremen based on project needs.
• Supports trades foremen in supervising, assigning, coordinating, training, and evaluating semi-skilled and skilled trades personnel according to their skill, experience, and job knowledge. Recommends training to enhance skill and productivity of employees and assists in development of training processes/procedures. Continually monitor foremen's project designations, deck plate presence, understanding of work scope, and efficiency of trades management.
• Manages lifecycle of shop personnel through all phases of employment, to include: hiring and retention efforts of shop personnel, as well as developing/delivering coaching and disciplinary actions needed to address performance concerns. Responsible for personnel administration needs, to include recommendations/handling of change requests facilitated by EANs (pay, reclassification, etc.).
• Engaged in workforce development by identifying candidates for additional development/mentorship opportunities, support succession planning efforts, and ensuring assigned apprentices have appropriate oversight and developmental resources.
• Breaks broad projects down to practical action plans, ensuring adequate shop manning resources, and develops/executes POD for all shop resources (with the input of Foreman) daily to ensure production goals are executed safely and efficiently.
• Responsible for final approval and presentation of all project deliverables via condition reports and approval/management of all material orders, ensuring contractual requirements and period of performance are met.
• Responsible for complying with all technical aspects of the job including adherence to all drawings, procedures, etc. and manages test and inspection plans for assigned areas (overseeing submittal of required documentation, ensure foreman attend inspections as required, etc.).
• Responsible for manufacturing, installation, operation, testing, and process operations that have a significant financial impact on the company's performance.
  

• Provide data/feedback for current budgets via hours management/EACs, including dates, and report scheduling and progress updates to superintendents/project management.
  

• Bachelors/Registered Apprentice (grad) + 2 years relative trades experience (or HS + 6 years trades experience) and 2 years of prior supervisory experience.
• Ability to understand job specifications, drawings, and corresponding technical references years supervisory experience.
• Well-developed communication skills, both verbal and written, to effectively communicate with employees/leadership/customers and prepare/deliver written reports and correspondence.
• Must have knowledge of weight testing in accordance with specified technical manuals for equipment such as cranes, davits, winches, anchors, anchor chains, shafts, and propellers.
• Must be familiar OSHA and NAVSEA standards.
• Must demonstrate proficiency in general mathematics and trigonometry.
• Must have ability to understand job specifications, drawings, and corresponding technical references.
• Regular, reliable attendance.
  

• Exposure to or experience supporting multiple trades is highly preferred
• 4 years overall supervision experience for the trade to be supervised is highly preferred.
• Knowledge of inspection procedures for structural components, booms, jibs, gears, drums, sheaves, blocks, hooks, operating mechanisms, hydraulic and pneumatic systems, hydraulic cylinders, wire rope, and operational aids preferred.
• Crane signaling certification (mobile and overhead) preferred.
• Construction and crane company experience is highly preferred.
• Able to schedule multiple activities.
  

• Must be able to access government facilities and obtain and maintain DBIDS.
• Must be eligible for TWIC.
• Position requires US Citizenship.
  

• Minimal Travel; 10% or less.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• May ride ships at sea for extended periods
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
• Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.
  

Bundy Baking Solutions is the world's leading manufacturer of baking equipment custom and stock baking pans and pan coatings. Built with extensive hands-on knowledge of the baking industry and its operations, Bundy has a legendary reputation for both quality and innovation.

• Studies sample parts, blueprints, drawings, and engineering information to determine methods and sequence of operations to fabricate product
• Operates metalworking machine tools, such as lathe, milling machine, drill, or grinder to machine parts to specifications
• Assembles parts into completed units using jigs, fixtures, hand tools, and power tools
• Fabricates, assembles, and modifies tooling, such as jigs, fixtures, templates, and molds or dies to produce parts and assemblies
• Verifies dimensions of parts, using precision measuring and marking instruments and knowledge of trigonometry within .0005
• Calculates and sets controls to regulate machining, or enters commands to retrieve, input, or edit computerized machine control media
• Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials onto machines
• Measures, examines, and tests completed units to detect defects and ensure conformance to specifications
• Dismantles machines, dies, or equipment, using hand tools and power tools, to examine parts for defect or to remove defective parts
• Cleans, lubricates, and maintains machines, tools, and equipment to remove grease, rust, stains, and foreign matter
• Confers with engineering, supervisory, and manufacturing personnel to exchange technical information
• Designs fixtures, tooling, and experimental parts to meet special engineering needs

• Knowledge of various machines such as cutting tools, lathes, milling machine, shaper, grinder
• Knowledge of powered tools
• Ability to read blueprints
• Ability to measure, mark and organize metal stock for machining
• The ability to exert maximum muscle force to lift, push, pull, or carry objects weighing 50 pounds
• The ability to choose quickly and correctly between two or more movements in response to two or more signals (lights, sounds, pictures, etc.). It includes the speed with which the correct response is started with the hand, foot, or other body parts
• The ability to quickly respond (with the hand, finger, or foot) to one signal (sound, light, picture, etc.) when it appears
• The ability to time the adjustments of a movement or equipment control in anticipation of changes in the speed and/or direction of a continuously moving object or scene
• The ability to communicate information and ideas in writing so others will understand
• The ability to remember information such as words, numbers, pictures, and procedures
• The ability to quickly and repeatedly bend, stretch, twist, or reach out with the body, arms, and/or legs

PIbefd11991366-26289-39921649

We begin with dreams. Dreams drive our motivation. Dreams are our future. The world's dreams, people's dreams, our dreams. Our passion creates ideas that make dreams come alive. Technology and products that were only dreams become reality.

All for dreams. Dreams challenge and the Nidec-Group will continue to meet the challenge. For the world's and people's tomorrows; the world's first, the world's best technologies and products; we will continue our part in creating a better society.

Nidec is the world's No.1 comprehensive motor manufacturer handling \"everything that spins and moves\", miniature to gigantic. Nidec is a global enterprise comprised of over 300 subsidiaries/affiliates. We are a leading manufacturer of commercial motors, industrial motors, appliance motors, and controls. Our product line features a full line of high efficiency motors for industrial applications in water treatment, mining, oil and gas, and power generation, and for commercial applications such as pool and spa, condensers, cooling towers and large refrigeration units. From keeping us comfortable in our homes to pumping clean water to making our cars more safe, electric motors are an indispensable part of our daily lives. At Nidec, our employees are on the forefront of developing new motor technologies. As we move deeper into the age of robotics, the impact of motors will only increase. With over 140,000 employees stationed worldwide, Nidec continues to be a unique organization, and each location maintains its individual personality. Whether driving locomotives, powering offshore platforms or keeping the lights on after a storm, Nidec electric power generation products impact the world on a daily basis. With over 1,000 employees in the Americas, we are moving forward with technology to solve our customers' electrical power needs for both prime and backup generation needs as the industry's leading manufacturer.

Shift: 2nd Shift

Days of Work: Monday - Thursday

Work Hours: 4:00pm - 2:00am

Work Location: On-site (Mankato, MN)

Starting Salary: $33.08 to $46.31 / Hour

Pay Frequency: Bi-Weekly

At Nidec, we prioritize our team's well-being and success. Our comprehensive benefits package is designed to support you both personally and professionally. These are the great benefits we offer, with additional perks and programs available to enhance your overall experience with us.

• Competitive Compensation: Attractive salary with additional bonus opportunities.
• Health and Wellness: Comprehensive medical, dental, and vision coverage, effective from your first day.
• Retirement Savings: 401(k) plan with a best-in-class company match of 100% on the employee's first 6% with an additional 3% employer contribution to support your financial future.
• Work-Life Balance: Generous time off package, including PTO and holidays.
• Education Assistance: Tuition reimbursement and continuous learning opportunities to support your professional growth.

Position Objective: Responsible for engineering documentation including blueprint reading and GD&T tolerances. Develop, optimize and maintain machine processes in a fast-paced production shop. Responsibilities include CAD design, CNC programming, creation of tool list, setup and part finishing documents. CNC equipment includes but is not limited to CNC turning centers with live tooling, CNC mills/lathes, lasers, CNC turret punches, and other computer operated equipment.

Essential Duties/Responsibilities:

• Work from customer's drawings and solid models to create, optimize and maintain CNC programs primarily for processing turned parts
• Must have a working knowledge of GD&T, fundamentals of geometry and trigonometry. Ability to transition between SI and metric units. Proper use of various measuring tools including Vernier calipers, micrometers, tread gages, etc.
• Create manufacturing processes and programming in a timely manner to support production schedules and customer delivery dates.
• Working knowledge of G code, M code, tool selection, steel grade metallurgy, tool geometry and coatings
• Assist on tooling design and development strategy within the programming team.
• Initiate and participate in projects to implement cost reduction strategies related to CNC programming optimization, tool life management, and/or quality improvement.
• Initiate Engineering Change Requests as required to ensure issues with CNC programs and related documentation are properly addressed and documented.
• Assist in the quoting process by providing setup and run time estimates for turned parts as well as material requirements, process steps and tooling requirements.
• Ensure changeover documentation for all CNC processes are current, accurate and standardized throughout the company.
• Ensure production and shipping schedules are met.
• Perform all other tasks or responsibilities as delegated by the Plant Manager/Site Leader.

Experience/Skills:

• Previous experience working with CNC equipment in a manufacturing environment
• Minimum 4 years programming Horizontal lathes and Vertical Turning Lathes required
• Minimum 1 years working CAD software (AutoCAD) Required
• Minimum 4 years working with Master Cam preferred
• Knowledge of Unigraphs software is a plus

Education:

• Associate Degree or Technical Degree Required

Equal Employment Opportunity and Affirmative Action at Nidec

Nidec is an Equal Employment Opportunity (EEO) and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants receive consideration for employment without regard to their age, gender, gender identity, sexual orientation, race, color, genetic information, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by law. For more information regarding your (EEO) rights as an applicant, please visit the following website: Shift Schedule

First Shift (United States of America)

No Soliciting

Nidec will not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to Nidec job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Nidec Talent Acquisition team is required before any external candidate can be submitted and such candidate must be submitted to the Nidec Talent Acquisition team.

• 
  
• Fabricate mechanical parts using CNC & Manual mill, CNC & manual lathe, and other metal working equipment.
  
• Rework of parts tooling, molds, and fixturing.
  
• Knowledge in measurement equipment (calipers, micrometers, etc.).
  
• Design, build, and machine prototype molds, new production molds, extrusion dies and mandrels, cutting tools, pad printing, guiding, and holding fixtures to meet production requirements and work order requests.
  
• Prioritize, track, and report the status of all jobs and work orders in a timely fashion. Keep mold maintenance logs, tooling inventory, and equipment maintenance records updated and current.
  
• Coordinate outsourcing of machining job that require outside expertise, equipment, or capacity.
  

• 
  
• High school or GED equivalent degree or equivalent experience in related field, trade school is preferred.
  
• Math skills, with good knowledge in algebra and trigonometry.
  
• Minimum 3 years of experience in providing tool repair, support, and maintenance to a manufacturing environment, specializing in medical grade silicone extrusion and molding processes preferred.
  
• Ability to design simple mechanical components from concepts and documents.
  
• Working knowledge of SolidWorks, MasterCAM, CNC equipment, conventional mills, lathes, and surface grinding.
  
• Strong technical ability in reading and interpreting blueprints, drawings, and 3D CAD files is required.
  
• Demonstrated ability to troubleshoot and resolve problems in an organized manner.
  
• Mechanically inclined, close attention to detail, adapts to change easily, and high level of motivation to complete tasks promptly.
  

*MUST BE A US CITIZEN/GREEN CARD HOLDER*

*MUST BE WILLING TO WORK ON OUR W2*

Job Description

What You’ll Do

• Generate, maintain, and verify CMM programs utilizing PC-DMIS v. 2025.1.
• Program parts following established standards and documented Product Quality Plans.
• Manipulate models using Siemens NX 2206/2412 as needed to support CMM programming requirements.
• Prove out CMM programs and validate measurement results.
• Set up, configure, and prove out machine hardware and software as required.
• Provide CMM-related support to Manufacturing Engineering teams and deliver operator training when necessary.
• Provide daily operator support and assist with troubleshooting and problem-solving on the shop floor.
• Initiate and lead process improvement projects to enhance Safety, Quality, Delivery, and Cost related to CMM processes.
• Generate and support workstation instructions (methods) related to CMM operations.
• Communicate effectively with appropriate team members and stakeholders when required.
• Work effectively both independently and in a team-based environment within a matrixed organization.
• Thrive in a fast-paced environment while embracing and driving positive change within the organization.

Basic Qualifications

• Bachelor’s Degree, Associate’s Degree, or Machinist Apprentice graduate with 3+ years of experience in dimensional inspection, OR
• High School Diploma with 6+ years of experience in dimensional inspection.
• 3+ years of experience in offline PC-DMIS programming.

Preferred Qualifications

• Strong ability to interpret engineering drawings with GD&T knowledge (ASME Y14.5M – 2018).
• Experience programming and operating Coordinate Measuring Machines (CMM).
• Experience working with solid models (preferably Siemens NX 2206/2412).
• Bachelor’s Degree in Engineering, Mathematics, or Computer Science.
• Experience with Structured Light Scanning, preferably using Zeiss Inspect Professional Software.
• Programming experience with VBA, Python, C++, or similar languages.
• Strong problem-solving and organizational skills with solid shop math knowledge (geometry and trigonometry).
• Ability to manage multiple projects simultaneously in a fast-paced environment.
• Experience with Heavy Duty Gas Turbine (HDGT) or Aerospace components is a plus.

Summary:

We are seeking a Quality Assurance Inspector at our manufacturing facility in Seattle, WA. This role will require you to accurately evaluate and document receiving, in-process and final inspection of highly intricate prototype, custom parts and assemblies for a variety of applications from Aerospace, military, Energy Production and R&D. You will need to have an extreme attention to detail, skill in basic shop mathematics, the ability to read and interpret blueprints and specifications and personal discipline to document and report nonconforming products in an objective manner.

Responsibilities:

• Enact inspection activities to obtain objective evidence of compliance for CNC manufactured parts, assemblies, complex tooling, and other components.
• Interpret and measure features containing Geometric Dimensioning and Tolerancing (GD&T).
• Use manual inspection tooling such as micrometers, calipers, height gauges and surface plate activities to obtain compliance evidence for requirements up to the fourth decimal place (tenths) of accuracy.
• Create and review compliance documentation related to Receiving, In-process and Final inspection on Materials, Processes and Completed Products.
• Ensure conformance with customer Drawing, Specification and Purchase Order.
• Assist engineering department in implementing strategies to improve accuracy.

Qualifications:

• Have recent 3-5 years (min) working experience within a machine shop atmosphere.
• Have a reasonable understanding of math, including trigonometry and geometry.
• Have a strong understanding of GD&T per ASME Y14.5.
• Be skilled in the use of all measurement equipment and machinery within a manufacturing environment.
• Strong skills in blueprint and part drawing interpretation for high tolerance, precision parts are mandatory.
• Bring ideas to the table to increase speed and efficiency in the department.

Skills:

• Experience using DCC controls on a CMM.
• Experience in PC-DMIS, utilizing both solid models and touch point programing to perform inspection activities.
• Functional use of SolidWorks or a similar CAD system.
• Familiarity with complex dimensional reporting mechanisms, such as AS9102.
• Manipulation of outputs to multiple formats such as linear graphical representation, point cloud comparison, and polar graphics.
• Familiarity with Digital Product Definition (DPD) requirements per D6-51991 desired.

If you feel this is the time to join an expanding company where you can be effective and be noticed for the positive influence you bring, submit your resume online.

Diversity and equity are important values for us, and we encourage all qualified applicants to apply, regardless of race, gender, religion, sexual orientation, or disability. Position is subject to export control regulations as defined in 22 CFR 120.62

Our customers are at the heart of everything we do. As a privately owned and managed company, we are committed to delivering an exceptional experience through our comprehensive services. We specialize in full-service engineering, design, precision machining, and equipment manufacturing. Ensuring the highest standard of quality and craftsmanship or our valued clients.

What we're looking for:

• Comfortability working with high mix, low volume parts. Ranging in various sizes, materials, and complexity.
• Extensive hands-on experience in the setup and operation of CNC machines.
• Familiarity with selecting, maintaining, and using various cutting tools and fixtures.
• Strong troubleshooting abilities to identify and resolve machining issues quickly. For example:
• Skilled in identifying mechanical and software issues within CNC machines. This includes understanding error codes, alarm messages, and other indicators that suggest a malfunction.
• Recognizing signs of tool wear, such as changes in surface finish or dimensions, and knowing how to adjust feed rates, speeds, and tool selections accordingly. Also adept at diagnosing and addressing tool breakage to minimize downtime.
• Experience in implementing process improvements and efficiencies.
• Ability to program CNC machines from scratch, when needed.
• Skilled in selecting optimal tool path strategies, including appropriate feeds, speeds, and depths of cuts.
• Ability to calculate RPM based on SFM.
• Versatility in operating both CNC vertical machining centers and turning centers is highly preferred.
• High attention to detail, capable of maintaining tight tolerances.
• Advanced knowledge of shop mathematics, including trigonometry.
• Strong ability to interpret and understand complex technical drawings and blueprints.
• Consistently efficient in running both new and repetitive jobs.

The candidate should be able to demonstrate a deep understanding of machining processes and the ability to produce high-quality components efficiently.

Why you'll love joining the Butler Tool Team:

• Competitive wages with overtime opportunities
• Comfortable air-conditioned shop
• 100% company paid premiums for Health, Dental, Life Insurance, and Short-Term Disability Insurance
• Up to 100% tuition reimbursement for continued education in various fields
• PTO with 8 paid holidays per year
• 401(k) plan with company matching contributions
• Annual bonus opportunities
• Referral bonuses

We're moving! Butler Tool is currently building a brand-new facility in Sussex, WI. This facility will be over twice as big as our current location! Please consider this possible commute change to be in affect within the coming year.

SUMMARY OF POSITION:

The Engineering & Programming Technician works independently throughout the manufacturing plant to analyze, modify, and build control systems to improve safety, quality, delivery, and productivity of equipment and facility systems. Additionally, this individual may be called upon to assist in troubleshooting machine issues, to implement safety, quality, and productivity projects, and to introduce new products and processes. This individual will be responsible for identifying and implementing opportunities that are machine and process related that can be improved through the use of technology. They will need to coach and mentor others within the manufacturing plant in their areas of expertise. This position works with other technicians, tool room personnel, planners/schedulers, engineers, department managers, and operators during the analysis, build, and implementation phases of various projects. This individual will also work with the MES systems group to ensure that Pella control systems standards are applied and maintained.

PELLA CORPORATION REQUIREMENTS:

· Pass drug screen

· Pass pre-work vision screen

· Pass pre-employment tests

· Pass pre-work ability screen

ENVIRONMENT:

· Noise level requires hearing protection in designated areas

· Seasonal high temperatures and humidity

· Work in a team environment with the ability to communicate in a concise, polite and respectful manner

ESSENTIAL RESPONSIBILITIES:

§ Flexibility of work hours including mandatory OT when business needs requires.

§ Ability to safely work with and around moving equipment

§ Ability to communicate in a concise, polite and respectful manner with team members.

§ Regular / dependable attendance consistent with attendance guidelines is required.

§ Must comply with safety, quality, and production requirements and procedures.

§ Must maintain good housekeeping.

§ Design and implement controls for new and existing machines or processes using a variety of hardware components which include PLC’s, HMI’s, CNC’s, PC’s, motion controllers and standard industrial controls.

§ Ability to assist with the building of machines, tools, fixtures, jigs, and templates, as well as the project management of all of these.

§ Extensive knowledge of Programmable Logic Controllers (PLCs) and computers are required.

§ Must independently write, analyze, and modify PLC programs.

§ Ability to assist in maintaining all models and series of PLCs currently in use.

§ Maintain backup copies of PLC programs used in production and facility related equipment.

§ Develops electrical estimates for time, cost, and quality for projects.

§ Must have ability to work with data downloads.

§ Ability to establish and maintain machine settings for data downloads and collaborate with IT to set up or modify settings for data downloads.

§ Ability to troubleshoot and assist maintenance efforts when needed.

§ Ability to perform PM inspections on equipment.

§ Ability to obtain the appropriate PIV license.

§ Ability to work on ladders and vertical lifts when required.

ADDITIONAL RESPONSIBILITIES:

§ Other duties may be assigned.

§ Manage project related to improving equipment and facility using technology

§ Provide training to others on areas of expertise

EDUCATION AND EXPERIENCE:

§ Recommended that this individual has completed or is enrolled and seeking a 2 or 4 year degree in a related field of expertise.

§ Manufacturing-related experience is preferred.

§ Job specific experience is preferred.

§ Maintenance progression completion preferred.

SKILLS AND TALENTS: (*skills are required prior to entry into the position)

§ Decision making / problem solving in a manufacturing environment with minimal supervision.*

§ Ability to suggest process improvements and resolve problems.*

§ Must be self motivated, technically minded, and have good hands-on-ability.*

§ Excellent communication skills and the cognitive ability to learn the safety, quality, and productivity standards.

§ Ability to provide training to improve and maintain the programming knowledge of technical employees.

§ Organizational skills and time management skills to manage projects.

§ Knowledge of computer software such as AutoCAD, CMMS, and Microsoft Office required.

§ Ability to diagnosis and repair electrical, mechanical, pneumatic, and hydraulic problems.

§ Ability to work with sawdust system, compressed air, oxidizers, steam boiler, and electrical distribution systems.

§ Flexibility to travel.*

FACTORY SKILLS CLASSES PREFERRED

§ Industrial Math

§ Measurement Technology

§ Algebra/Trigonometry

§ Product Terminology

MAINTENANCE TRAINING PREFERRED

§ Basic Electricity

§ Motor Control I & II

§ Class B Electrician

§ Beginning Programmable Controllers

§ Pneumatics/Hydraulics

§ Advanced PLC

§ Maintenance Blueprint Reading

§ AutoCAD

PHYSICAL REQUIREMENTS:

· Lift up to 100 lbs. at waist level and up to 70 lbs. at shoulder level up to an occasional basis when moving products

· Push or pull with up to 100 lbs. of force up to an occasional basis when moving products

· Generate up to 90 lbs. of grip strength up to an occasional basis with each hand while handling products

· Generate up to 15 lbs. of pinch strength up to an occasional basis with each hand while handling products

· Display average coordination with both hands up to a continuous basis while performing job tasks

· Perform elevated work up to an occasional basis when handling products

· Stoop, kneel or squat up to an occasional basis when handling products

· Reach forward and to the side up to a frequent basis when handling products

· Stand up to a continuous basis and walk up to a frequent basis during the course of each shift

· Able to perform repetitive tasks up to 12 hours per day

Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).

Manage stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock.

Program and operate CNC/Manual mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.

Set up CNC/Manual mills and lathes by installing and adjusting chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.

Verify settings by measuring positions, first-run part, and sample workpieces.

Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

Ensure safe operations by adhering to safety procedures and regulations.

Maintain equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions.

Proficiency with software applications including CAD - CATIA preferred, Microsoft Excel, Word & PowerPoint.

CNC Programmer/Machinist Responsibilities:

Write and optimize CNC programs to create complex parts on 3 and 5 axis machining centers.

Design and fixture complicated setups on manual and CNC machines.

Calculate speeds and feeds for multiple materials.

Read and understand drawings.

Create and compile necessary documents to aid setting up machines.

Working knowledge of the following machines: Mill (manual and CNC), Lathe (manual and CNC), Saws.

Select tooling for specific applications.

Machine parts to print and/or other special requirements.

Utilize measurement equipment to qualify completed parts.

Requirements:

Minimum 5+ years experience writing CNC programs in a machining environment.

Demonstrates proficiency with CAD (CATIA), CAM software and G-code.

Experience with any CAD System, not limited to CATIA only: Mastercam, GibbsCam is acceptable.

Experience in using Vericut is a plus.

Proficient with GD&T.

Manual and CNC operator experience required.

Demonstrates strong time management skills with the ability to effectively coordinate multiple projects.

Experience writing post processors is a plus.

Knowledge of Microsoft Office Tools: Excel, Power Point