Quadrants Trigonometry Angles Jobs in Usa

Time Type: Full Time

Starting Pay: $50,000 / YR

Job Location: San Marcos, TX

McCoy’s Building Supply is looking for a Risk Safety Coordinator. A Risk Safety Coordinator is consultant multiple assigned company facilities and plans, directs, and implements organization safety program to ensure a safe and accident-free work environment.

The final candidate can office in our Headquarters location in San Marcos when not traveling or may choose to live in a central area in the markets they support. Relocation assistance will be provided to the final candidate who wishes to move to either area.

This is an in-person Risk position and is not eligible for 100% remote work in order to best support our employees working in our retail and manufacturing facilities.

SUMMARY

Plans, directs, and implements organization safety program to ensure safe and accident-free work environment by performing the following duties:

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Plans and implements safety policies and procedures in compliance with McCoy’s internal policies, local, state, and federal laws, including Occupational Safety and Health Administration (OSHA), Federal Motor Carrier Safety Act (FMCSA), Department of Transportation (DOT), etc.
• Plans and implements programs to train managers and employees in work site safety practices and fire prevention
• Works with and through store management, executive management and various insurance carriers and other third-party consultants within the risk management industry
• Prepares, studies and analyzes accident causes and hazards. Prepares written reports of findings and recommendations regarding unsafe and potentially dangerous conditions
• Inspects facilities to detect existing or potential accident and health hazards, determines corrective or preventive measures and follows up to ensure measures have been implemented
• Evaluates employee safety behaviors and work practices, works with store management to ensure preventive practices are followed
• Inspects properties such as buildings, yard area and vehicles to evaluate physical conditions, safety practices and hazardous situations
• Provides information such as signs, posters, barriers, and other materials to warn of potential and actual safety hazards and to prevent access to hazardous conditions
• Responds to, investigates and follows post-inspection procedures and post-accident response procedures for company related incidents
• Compiles, drafts and submits accident reports required by regulatory agencies
• Prepares and arranges safety exhibits and material for display, promotional work, industry conferences, and exhibitions
• Represents the organization in community or industry safety groups and programs. May conduct informal meetings among various educational and civic groups to promote general safety concepts
• Maintains safety files and records
• Follows standard operating procedures while carrying out the responsibilities of position
• Attends all team meetings and company training sessions as required

SUPERVISORY RESPONSIBILITIES

This job has no supervisory responsibilities

QUALIFICATIONS  

• Bachelor's degree from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience.
• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Ability to utilize Microsoft Word, Excel & Outlook, and other 3rd party software applications as assigned

WORK AVAILABILITY

• Must maintain regular and acceptable attendance, at such level as is determined by management
• Must be regularly available and willing to work at least 8 hours per day, 40 hours per week or such other hours per day or hours per week as the employer determines are necessary or desirable to meet business needs
• Must be available and willing to work such weekends and holidays as the employer determines are necessary or desirable to meet its business needs

TRAVEL REQUIREMENTS

• This position requires frequent travel with overnight stays
• Must meet driver’s license requirements as required by the company
• Must be able to legally obtain a rental vehicle in all states in which the company does business
• Must have current auto liability insurance

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is occasionally loud.

McCoy’s is an equal opportunity employer. Equal access to programs, services and employment is available to all persons. Those applicants requiring reasonable accommodations in the application and/or interview process should contact a representative of the People Development Department at (866) 896-0884. EOE, AAP, D, F, VA

• Education: High school diploma or equivalent.
• 6 months previous medical laboratory experience in specimen handling skills.
• Requires good communication, comprehension and typing skills.
• possess a significant understanding and knowledge of commonly used concepts, practices and procedures within the Pathology field.
• Evidence of increasing responsibility in personnel interaction and organizational skills required.
• Soft skills include oral/written communication skills, analytical/strategic skills, ability to utilize necessary computer programs including Word and Excel; must possess the ability to prioritize and perform multiple tasks simultaneously.

• Additional related education and/or experience preferred.
• AA degree preferred.

JUMPSTART, ADVANCE, AND LOVE YOUR CAREER WITH SMSI! 

At SMSI, we believe in our employees; with above-average pay, extensive benefits, vocational training, and a family-based atmosphere, we are always looking for people seeking to improve themselves. Together, our team strives to provide the best service possible for customers. We thrive on challenges and believe in fair compensation for dedication, attention to detail, and professionalism. 

Benefits: 

• Medical 
• Dental 
• Vision 
• 401(k) 
• Life Insurance 
• PTO 

$30+ hourly DOE

• Fit stainless steel and steel products (heavy and light gage) to specifications and drawings 
• Adhere to the blueprints to fulfill the product specifications 
• Determine material dimensions to confirm requirements 
• Inspect and examine parts to ensure they meet the quality standards and expectations 
• Willingness to back up positions, such as painting for vacations and sick days
• Ensure that equipment and tools are used and kept in good working order, for longevity of tool life and safety purposes 
• Ensure that the workspace is kept clean and organized for safety purposes
• This position is safety sensitive

• Proven experience in fabrication, welding, manufacturing, or a related field - especially structural fitting
• Experience with Hydraulic metal Shears, Plate Rollers, Hydraulic metal Brakes, Manual Metal Brakes, Proficient with angle grinders (electric and pneumatic) 
• Strong capabilities in interpreting engineering blueprints and drawings 
• Excellent understanding of various types of metal and their respective properties 
• OSHA 10 will be required within 60 days of employment 
• Familiarity with Safety regulations and readiness to utilize personal protective Equipment (PPE) 
• Experience with painting is a plus 

SMSI is dedicated to providing the highest quality mechanical services performed in an honest, dependable, and efficient manner. SMSI offers lots of room to grow in a fast-paced company. We have been serving commercial and industrial markets for 30 years.

Compensation details: 30-30 Hourly Wage

PI1f14d7c37fdc-3631

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process. Your expertise will be essential in optimizing machine setups and operations, contributing to the production of high-quality components that meet stringent industry standards

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production orders, first lots, or tool tryouts.

• Review Work Orders (W/O) to confirm the correct type and quantity of materials and tools or fixtures are issued and free from visible defects, updating CMES as necessary.

• Identify the type of setup required based on documentation and check machine setups or parts completed by previous operators to assess job progress and ensure safe working conditions.

• Select and verify the condition of machine accessories and holding devices (e.g., chucks, vises, templates) and identify any required fixtures or shop aids.

• Attach air nozzles or suction devices for vacuum fixtures, securing them with bolts or clamps as specified in the operator setup documents.

• Use overhead cranes to load and unload parts and fixtures as required for the machining process.

• Upload and download CNC (Computer Numerical Controlled) programs to machine controllers using computing equipment from various servers or databases.

• Select and check cutting tools according to program specifications, ensuring they are the correct type, length, diameter, and in good condition before installation.

• Set machine coordinates or index points per CNC documents, including cutter offsets, tool heights, and probes, using appropriate measuring tools.

• Run CNC programs to machine rough and precision cut parts, monitoring machine operations for unusual vibrations, sounds, or warning indicators.

• Adjust machine settings (e.g., speeds and feeds) to correct machining issues or prepare the machine for subsequent operations, including head and spindle angles.

• Troubleshoot and repair minor controller problems as required, and initiate requests for corrective action when machine malfunctions occur.

• Perform Statistical Process Control (SPC) functions as required to ensure quality standards are met.

• Check completed work for defects and ensure parts meet drawing specifications, removing sharp edges with deburring tools as required.

• Maintain personal and tool certifications and assist planners or programmers in determining final numerical control programs to optimize machine utilization and minimize setups.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ years of experience setting up and operating Manual and CNC machines

• 2+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 2+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications

•  2+ years of experience working with powered hand tools

• Experience with reading and interpreting drawings, specifications, material processes, schematic and diagrams

• Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift

Preferred Qualifications:

• Experience in Fabrication of airplane parts

• Experience in Fabrication of temporary tooling

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with the potential to earn up to $61.01 /hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Mar. 20, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Contingent Upon Program Reward

The position is contingent upon program award

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Inspector to join our Field team in Everett, Washington.

As an Aviation Maintenance Inspector, you will be instrumental in upholding the highest standards of quality and safety within our aircraft maintenance operations. Your primary responsibility will be to conduct thorough inspections of aircraft structures, systems, and components, ensuring compliance with industry regulations and safety protocols. You will meticulously evaluate maintenance work, troubleshoot issues, and document any nonconforming materials or processes to maintain rigorous quality assurance. A Color Vision Certification may be necessary for portions of this job. Your expertise will be essential in performing airworthiness inspections and coordinating with regulatory bodies, ensuring that all aircraft are flight-ready and meet stringent specifications.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Conduct audits and surveillance of all manufacturing and quality assurance processes, ensuring compliance with specifications, processes, and procedures.

• Perform quality functions, including customer and FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections (both pre-flight and post-flight).

• Initiate and document any nonconforming materials, hardware, software, tools, parts, or assemblies in accordance with established specifications and procedures.

• Utilize technical specifications, sketches, manuals, and FAA publications to effectively accomplish inspection assignments.

• Maintain all company and FAA-required records and inspection forms, ensuring accuracy and compliance.

• Uphold a safe, clean, and organized work environment while planning and organizing work packages to promote efficient operations and meet predetermined schedules.

• Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.

• Interpret and adhere to airworthiness directives, service bulletins, and other approved data to ensure compliance.

• Apply mathematical calculations to set up and use precision measuring tools for accurate measurements of gaps, heights, angles, and hole dimensions.

• Create production aids as needed to facilitate inspection assignments.

• Maintain necessary certifications, licenses, and permits required for the role.

• Exchange information with suppliers, customers, and company representatives to explain or demonstrate operations, tests, or any difficulties encountered.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights up to 35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).

• Must be willing to work any shift; including days, evenings, nights, and weekends.

Preferred Qualifications:

• FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.

• 10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.

Safety Sensitive Statement:

This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 06, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Structural Mechanic 2 in GAC St. Louis

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Employee needs to be skilled in sheet metal structures and repairs.

The compensation range for this role is $26.51 - $30.93 per hour.

Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location.

Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes:

• Medical, prescription, dental and vision coverage
• Life and disability insurance
• Retirement savings plan
• Employee assistance plan
• Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance.

1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft .
2. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure .
3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents .
4. Check all work and ensure a defective free assembly prior to final inspection .
5. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
6. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information .
7. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
8. Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required.
9. Able to work with minimal supervision on duties and tasks .
10. Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) .
11. Properly use and maintain company-provided tools and equipment and returns items to tool room after use .
12. Ensure standard operating procedures are followed when operating ground support equipment .

1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags .
2. Ensure accurate daily job charging to the aircraft .
3. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .
4. Assist in maintaining shop equipment and associated JSAs .
5. Support Lean Activities .

1. Must be able to read and interpret blue prints.
2. Basic computer skills and basic shop math skills.
3. Must be able to read a scale and perform basic shop math.
4. Read and comprehend basic documents and instructions.
5. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
6. Must demonstrate good housekeeping and safety practices.
7. Ability to work with composite resins and materials.
8. Must be able to work any shift.
9. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs.
10. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 231417

Category: Operations

Percentage of Travel: Up to 25%

Shift: First

Employment Type: Full-time

Posting End Date: 04/03/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

SkillBridge Structural Mechanic in N/A

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Must be eligible for the DOD SkillBridge Program.

You may be eligible to participate in SkillBridge if you: Have 180 days of service or fewer remaining prior to your date of discharge and you have at least 180 continuous days of active Military service. Obtain approval from your unit commander. Agree that participation in the DOD SkillBridge can be terminated at any time by the service if mission requirements dictate.

Education and Experience Requirements

SkillBridge Structural Mech II- 2 years related structural assembly experience.

SkillBridge Structural Mech III- 4 years related structural assembly experience.

SkillBridge Structural Mech IV - 6 years related structural assembly experience.

1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft .
2. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure .
3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents .
4. Check all work and ensure a defective free assembly prior to final inspection .
5. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
6. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information .
7. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
8. Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required.

1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags .
2. Ensure accurate daily job charging to the aircraft .
3. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .
4. Assist in maintaining shop equipment and associated JSAs .
5. Support Lean Activities .

1. Must be able to read and interpret blue prints.
2. Basic computer skills and basic shop math skills.
3. Must be able to read a scale and perform basic shop math.
4. Read and comprehend basic documents and instructions.
5. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
6. Must demonstrate good housekeeping and safety practices.
7. Ability to work with composite resins and materials.
8. Must be able to work any shift.
9. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs.
10. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 230675

Category: Operations

Percentage of Travel: Up to 25%

Shift: Multiple Shifts

Employment Type: Skillbridge

Posting End Date: 09/27/2025

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic III - Sign On Bonus Available in GAC Mesa

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Heavy structures MOD experience preferred.

1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft .
2. Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule .
3. Rivet structural members, assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures .
4. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents .
5. Check all work and ensure a defective free assembly prior to final inspection .
6. Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems .
7. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
8. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information .
9. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
10. Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required.

1. Participate in continuous improvement activities .
2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use .
3. Ensure standard operating procedures are followed when operating ground support equipment .
4. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags .
5. Ensure accurate daily job charging to the aircraft .
6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .

1. Basic computer and basic shop math skills.
2. Read and comprehend basic documents and instructions and read a scale.
3. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
4. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment.
5. Ability to work with composite resins and materials.
6. Must be able to work any shift.
7. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs.

Additional Information

Requisition Number: 230580

Category: Operations

Percentage of Travel: Up to 25%

Shift: Multiple Shifts

Employment Type: Full-time

Posting End Date: 04/30/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft