Quadient Postage Meter Error Codes Jobs in Usa
3,695 positions found — Page 11
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Industrial Maintenance Electricians, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities:
Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)
Determine if system should be shut down or work must be performed with power source on
Lock out, tag out, try out equipment and related systems
Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers
Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay
Troubleshoot electric motors using appropriate test equipment
Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system
Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel
Service and maintain electrical systems on various types of overhead cranes
Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)
Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs
Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance
Install, replace and repair fiber optic cable for computers and computing systems
Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets
Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)
Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas
Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems
Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications
3+ years of experience as an Electrician or Apprentice.
1+ years of experience maintaining industrial equipment.
Experience working from heights and using fall protection equipment with weight limitations .
Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Must be able to complete fall protection training.
Preferred Qualifications:
Electrician license (EL01 &/or EL 07) or an electrical card.
Crane related experience.
Experience with prime power.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for all shifts
Total Rewards & Pay Transparency
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $33.32 per hour – $61.01 per hour
Applications for this position will be accepted until May. 29, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician
- Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State.
As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount.
You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications.
Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications.
Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems.
Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions.
Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages.
Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy.
Comply with all Federal, State, and Company regulations while performing duties.
Collaborate with other crafts to assist in troubleshooting outside the central control system as needed.
Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency.
Communicate relevant information to succeeding shifts using management-approved methods.
Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems.
Maintain equipment records, logs, and updates, preparing reports and schedules as required.
Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion.
Ensure system configurations comply with FAA and accreditation requirements.
Possess working knowledge of software programming languages (e.g., Boolean, ladder, C, C++) and numbering systems (binary, octal, hexadecimal).
Understand electronic theory, computer and networking architecture, microprocessors, and discrete components.
Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems.
Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design.
Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes.
Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required.
Perform tasks associated with other job classifications when necessary to complete assignments.
Obtain and maintain applicable licenses, certificates, and certifications.
Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems.
Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications : 3 years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance.
1 years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms.
Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Preferred Qualifications: Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Experience working around 3 phase, industrial voltages 480v, 277v, 208v.
Ability to work around electromagnetic fields as a result of various types of production equipment.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts .
Working in other shifts and/or overtime varies based on business needs.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay : $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
BHE GT&S
JOB DESCRIPTION
BHE GT&S has an exciting opportunity as an Instrument & Control Technician/Sr. Instrument & Control Technician supporting our North Summit Station in Hopwood, PA.
RESPONSIBILITIES
This role installs maintains and troubleshoots instrumentation control circuits and equipment related to natural gas processes such as the compression, dehydration, measurement, transmission and storage of natural gas.
- Installation includes mounting wiring connecting testing configuring and programming instruments and devices.
- Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center.
- Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc.
- Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities.
- Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets.
- Ensures regulatory and compliance standards are met.
QUALIFICATIONS
Two-year degree with a minimum of one year direct hands-on experience in instrumentation, PLCs and Computer Systems OR a minimum of four years direct hands-on experience in instrumentation, PLCs, and Computer Systems without a two-year degree.
Instrument & Control Technician :
- Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
- A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
Required : Must acquire ISA Certified Control Systems Technician (CCST) Level 1 certification within one year of ISA eligibility, not to exceed 15 months.
Sr. Instrument & Control Technician :
- Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
- A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
- Ability to lead project teams, assume project supervisor role and develop action plans.
- Knowledge of Natural Gas and Electric Driven Gas Compressors.
- Knowledge of Gas and Fire Detection Systems
- Knowledge of Emergency Shut Down (ESD) Systems.
Both levels :
- Ability to interpret control system software for the purpose of diagnostic troubleshooting.
- Ability to pass electrical, electronic, and digital equipment troubleshooting tests.
- Ability to troubleshoot electrical, electronic, and pneumatic equipment.
- Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams.
- Ability to define specifications and requisition instrumentation and control equipment.
- Ability to define problems, collect data and draw conclusions.
- Ability to work independently and as a team member.
- Ability to communicate effectively and develop rapport.
- Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.)
- Ability to operate personal computer.
- Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems
- Knowledge of electric driven compressors may be required.
- Knowledge of electrical and electronic theory and principles
- Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same.
- Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS)
- Knowledge of Variable Frequency Drives (VFD)
- Knowledge of Human Machine Interface (HMI)
- Knowledge of Ethernet Communications Equipment
- Knowledge of Valves and Positioners
- Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards
- Knowledge of applicable regulatory requirements
Preferences :
It is strongly preferred that the candidates have the additional knowledge, skills, and abilities to effectively perform the job:
- Knowledge of electronic, radio, digital, and remote-control theory.
- Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.)
- Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain.
- Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints.
- Ability to prepare technical reports and repair and maintenance records.
- Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations.
- Ability to directs and participates in installation of telecommunications equipment.
- Ability to interpret and implement gas measurement and SCADA device installation specifications.
- Ability to performs design programming installation and operation of electronic gas measurement and control systems.
- Inspects and tests facilities and equipment to identify malfunctions.
- Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment.
- Ensures installations and equipment comply with regulations.
- Ability to supervise MC&C projects.
- Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities
**Relocation assistance for this position is available dependent upon meeting eligibility requirements.
Education
- Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.)
Preferred Degree
- Electronics & Communications Engineering
* Preferred Licenses, Certifications, Qualifications or Standards:
- ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months)
CHAMPION :
- Contribute to a team-centric work environment based on mutual respect and integrity
- Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers
Employees must be able to perform the essential functions of the position, with or without an accommodation.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs.
ABOUT THE TEAM
BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation.
JOB INFO
Job Identification 10004544
Job Category Pipeline Operations
Posting Date 2026-03-18
Apply Before 2026-04-07T03:59:00+00:00
Job Schedule Full time
Locations 252 Jumonville Rd, Hopwood, PA, 15445, US
Travel Requirements Up to 25%
Relocation Assistance Available for this position dependent upon eligibility requirements
Business Eastern Gas Transmission and Storage, Inc.
Compensation details: 32.26-46.39
PIa35bdf77f43e-37344-40004115
Under general supervision performs stationary engineer work in the hospital power plant involving a variety of routine and fairly complex problems. To ensure all equipment and systems are properly operating for a maximum safety and comfortable environment.
Primary Duties and Responsibilities
* Technical/Mechanical: Operates maintains and performs preventative maintenance on technical equipment. Operates boilers water chillers pumps air compressors and generators to provide steam electrical power heat and chilled water throughout hospital. a. Performs preventive maintenance and repairs on water /steam distribution systems other boiler associated systems. b. Interprets technical information related to equipment operation and maintenance. c. Maintains constant watch over dials meters and gauges to assure proper operation and to detect malfunctioning equipment. d. Records data in appropriate logs and operates boiler room EMS systems. e. Runs test on boiler and cooling tower water and adjusts treatment dosage as needed. f. Maintains proper operation of pneumatic tube system. g. Makes quality improvement or cost containment recommendations and sees through approval and implementation stages.
* Customer Service: Consistently displays professionalism in dealings with customers staff and physicians. Promptly answers customer and staff requests a. Approaches greets and offers assistance and direction to patients family members physicians and others who may need help in finding their way. b. Takes initiative to solve problems and recommends improvements of hospital procedures and intra or interdepartmental processes.
* Development: Participates with supervisors in identifying learning needs. When learning needs are identified participates in training and development activities. a. Attends hospital sponsored training programs as required by the department. b. Completes all mandatory requirements within allotted timeframe for completion.
* Organizational knowledge: Works effectively within and between departments. Participates in departmental projects. a. Participates in interdepartmental activities when asked. b. Demonstrates a constructive approach during all interactions with staff supervisors and managers both inside and outside the unit. Minimal Qualifications
Education
* High School Diploma or GED required and
* Equivalent work experience in lieu of education may be considered.
Experience
* 1-2 years 2-3 years of experience as first class engineer required
* Previous experience in a hospital setting preferred
Licenses and Certifications
* Maryland First Class Stationary Engineer License required
Knowledge Skills and Abilities
* Ability to communicate with all levels of internal and external customers
* Knowledge of building equipment and systems techniques and codes.
* Knowledge of regulatory requirements including all State Federal and JCAHO regulation
This position has a hiring range of : USD $34.54 - USD $65.34 /Hr.
Must-Haves:
- 10+ years of maintenance experience
- 5+ years of management experience
- Ability to troubleshoot Allen Bradley PLCs (programming experience preferred)
- Ability to troubleshoot Fanuc robots (ideal: touch-up teaching)
- Experience with both mechanical and electrical systems
- High school diploma required; technical training/certifications preferred
- Experience managing spare parts inventory and ordering
- Strong leadership and ability to work within established guidelines
Plusses:
- Advanced PLC programming skills
- Technical certifications in electrical, hydraulics, pneumatics
- Familiarity with NEC, UL508A, NFPA 79 codes
Day-to-Day Responsibilities:
- Oversee preventive and reactive maintenance for plant operations
- Manage PM schedules and ensure timely completion
- Troubleshoot and repair machines and controls (extruders, corrugators, motors/drives, downstream equipment, chillers, etc.)
- Maintain spare parts inventory and order components as needed
- Manage CMMS performance and compliance
- Lead and develop maintenance team (currently 1 person, expanding to 2)
- Work with vendors for equipment installation and outsourced labor
- Handle some facilities maintenance and vendor coordination
- Support continuous improvement projects and capital investment opportunities
- Ensure safety compliance (Lockout/Tagout, Arc Flash, PPE)
Skills & Knowledge:
- Advanced electrical and mechanical troubleshooting
- Ability to read electrical, pneumatic, and mechanical drawings
- Proficient with electrical test equipment (voltmeter, ammeter, ohm meter, etc.)
- Knowledge of AC/DC drives, motors, and industrial wiring
- PLC I/O troubleshooting and networking
- Servo drive and motor motion training
- Strong interpersonal and leadership skills
- Proficient in Microsoft Office
- Root Cause Analysis and problem-solving experience
Education:
- High School Diploma or equivalent required
- Vocational/technical training preferred
- Basic PLC and drive training preferred
Process / Design Engineer - Oil/Gas
Catoosa, OK | Full-Time | On-Site | Monday-Friday
Candidates must be authorized to work in the U.S. without current or future sponsorship.
Compensation & Benefits
- Compensation: 85k-115k salary based on experience
- Health Coverage: Medical, dental, and vision insurance
- Retirement: 401(k) with company match
- Time Off: Paid time off and paid holidays
- Protection: Life and disability insurance
- Family Support: Parental leave
- Ownership: Employee-owned company
About The Role
- Process- and facilities-focused engineering role supporting gas processing and skid-based equipment
- Involved in capital and major maintenance projects across midstream-style facilities
- Blend of design work, field exposure, and project execution ownership
Key Responsibilities
Process & Facilities Engineering
- Design and validate gas processing systems (treating, compression, dehydration, stabilization, metering)
- Develop and interpret PFDs, P&IDs, and core process calculations
- Perform equipment sizing and support facility evaluations and modifications
Project Development & Execution
- Support scope definition, early estimating, and constructability reviews
- Participate in detailed design and execution-phase project support
- Assist with budgeting for process equipment and facilities
Client & Technical Support
- Act as a technical liaison with clients, vendors, and internal teams
- Participate in technical meetings and design walkthroughs
- Evaluate technical feasibility and soundness of proposed solutions
Codes & Tools
- Perform ASME pressure vessel calculations
- Utilize oil & gas process modeling and facilities design software
Qualifications
- Bachelor’s degree in Engineering (Chemical, Mechanical, Petroleum, Electrical, or Instrumentation)
- PE license preferred
- 2+ years of experience in gas processing, facilities, or packaged process equipment
- Strong understanding of P&IDs and oil & gas processes
- Proficient with oil & gas process and facilities design software (e.g., ProMax or similar gas processing simulation tools, and pressure vessel design software such as Compress)
- Strong communication, analytical, and organizational skills
Work Environment & Physical Requirements
- Office-based with periodic field or facility visits
- Ability to work at a computer for extended periods
- Occasional travel and light lifting may be required
- Valid driver’s license and acceptable driving record required
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
ATE Engineer – Hauppauge, NY
· 10+ years overall experience in test system software & test hardware development
· Strong knowledge in handling NI PXI, PCI Hardware ( DAQ Cards, Chassis). Integrate 3rd party hardware.
· Experience in development/ Upgrading automated test equipment , avionics, aerospace programs is a plus.
· High level of expertise in developing automated testing equipment for production testing of mixed-signal products and sub-assemblies for MIL/Aerospace applications including analog circuits, embedded microprocessors and FPGAs, and supporting circuitry and power supplies.
· Experience or knowledge of RS422/RS232, ARINC, AFDX interface knowledge, TCP/IP & Ethernet, UDP and such communication standards, protocols and/or interfaces is desirable
· Experience in managing Software code repositories and Continuous Integration/Deployment is highly desirable
· Strong verbal and written communication skills.
· Common I/O protocols (I2C, SPI, JTAG, RS-232, RS-422, RS-485, Arinc 429, MIL-STD-1553, etc).
· Solid foundation of LabView expertise
· High level of experience with hands-on troubleshooting and turn-on of new test systems, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
· Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
· Skilled in the use of common test bench equipment such as multimeters, DAQs, oscilloscopes, power supplies, RF and optical spectrum analyzers
· Hands-on and extremely strong in system bring-up, troubleshooting, calibration, etc.
· High level of expertise in NI LabVIEW , Test Stand & Phyton
· Experience in reading schematics
· Experience in test equipment failure analysis and troubleshooting skills in a production environment.
· Experience with prototyping solutions and bench testing methodology
· Experience in testing to MIL-STD-810, MIL-STD-461, MIL-STD-1275, RTCA/DO-160 and IPC-610 requirements.
Job Summary
The OSP Inspector – FTTH is responsible for overseeing and ensuring the quality and compliance of construction activities associated with Fiber to the Home (FTTH) projects. This role involves monitoring the deployment of fiber optic infrastructure, including aerial and underground installations, drop cable placement, and customer premise connections. The OSP Inspector works closely with contractors, engineers, and project managers to ensure that all work adheres to project specifications, safety standards, and industry best practices.
Key Responsibilities
Construction Oversight:
- Inspect FTTH construction activities, including mainline and distribution fiber, service drops, and termination points.
- Verify installation of fiber optic cables, splice enclosures, cabinets, handholes, and pedestals per project specifications.
- Oversee directional boring, trenching, and pole attachment processes to ensure compliance with plans and local regulations.
Quality Assurance:
- Conduct field inspections to confirm the integrity of fiber installations, proper labeling, and clean splice connections.
- Monitor adherence to safety protocols, including traffic control and worksite protection during construction.
Coordination and Communication:
- Serve as the liaison between contractors, internal teams, and customers to address issues and maintain project timelines.
- Communicate progress and escalate challenges to the OSP Manager or Project Manager.
Regulatory Compliance:
- Verify that all work complies with permitting requirements, right-of-way guidelines, and local utility regulations.
- Ensure contractor adherence to standards such as National Electrical Safety Code (NESC) and local ordinances.
Reporting and Documentation:
- Prepare and submit detailed inspection reports, including as-built updates and photographic documentation.
- Track material usage, contractor performance, and any deviations from project plans.
Qualifications
Education:
- High school diploma or equivalent required.
- Associate’s or Bachelor’s degree in Telecommunications, Construction Management, or a related field is preferred.
Experience:
- 3+ years of experience in FTTH or OSP construction and inspection.
- Proven knowledge of fiber optic installation techniques, splicing, and testing processes.
Skills:
- Ability to read and interpret engineering drawings, splicing diagrams, and project maps.
- Familiarity with fiber optic testing tools, including OTDR and power meters.
- Strong understanding of FTTH-specific construction practices and industry standards.
- Proficient in GIS software and OSP management tools is a plus.
- Exceptional attention to detail, problem-solving skills, and communication abilities.
Physical Requirements
- Ability to work outdoors in various weather conditions and terrain.
- Ability to lift and carry up to 50 lbs.
- Willingness to travel extensively within the project area as needed
Certifications
- FTTH Council certification or equivalent is preferred.
- OSHA 10/30 Certification is an advantage.
- Valid driver’s license with a clean driving record.
BlueSky Resource Solutions is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
BlueSky Resource Solutions is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryRegular
Add to Favorite JobsEmail this Job
About Us
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our strategic plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting Faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's Faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and is No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the well-being of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good, breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Department Information
Housing and Residence Life is passionate about the Georgia Tech residential student experience. With 97% of all first-year students choosing to live on campus, we create spaces and opportunities for Yellow Jackets to grow and connect from their first day of college through their graduate studies. We are proud to support our students personal development and academic endeavors while providing a safe and comfortable living environment.
Our department is a large and complex organization supporting over 8,700 on-campus residents among 49 traditional halls, suites, and apartments, some of which were constructed for the 1996 Summer Olympics. Our team of 200+ professional staff and 300+ student staff from six departments supports residents directly and indirectly with their unique talents. We are housed within the Student Engagement and Well-Being division, which includes many student service offices.
Mission
Housing and Residence Life offers quality, safe, well-maintained residential facilities. We encourage, promote, and facilitate customer-focused programs and services that attract students to our facilities and Georgia Tech. We provide physical, programmatic, and technological systems to enhance the quality of life on campus, support the academic needs of resident students, and complement the academic goals of the institute.
Job Summary
Inspect, repair, install, modify and maintain plumbing and piping systems and support equipment. Systems include sewer and domestic water, natural gas and hot water reheat or chilled water. Determine work required, sequence of tasks based on type assignment and perform and/or direct others in performing operations and maintenance functions. Follow-up as required. May be required to coordinate contractor personnel's services and provide work direction regarding plumbing systems to maintenance personnel and others. When working in a multi-craft environment, may be directed to assist others in non-plumbing-related duties.
- This position will interact on a consistent basis with: Facilities co-workers, building contact personnel, D&C staff, vendors, contractors, environmental health and safety personnel and utility providers.
- This position typically advises and counsels plumbers and maintenance workers. This position will supervise: NA.
Responsibilities
Job Duty 1 -
Perform installation, repair, replacement, testing, and troubleshooting of sewer and domestic water system components, such as surge tanks, circulating pumps, flow meters, sand filters, hot water solar systems, backflow preventers, piping, valves, controls, and storage tanks.
Job Duty 2 -
Operate, clean, repair, replace, test, and troubleshoot natural gas and propane burner and supply system components, including piping, pumps, valves, and controls.
Job Duty 3 -
Locate, inspect, clean, maintain, repair, replace, test, and troubleshoot components of hot water reheat or chilled water systems, including pumps with motors, various types of piping, valves, strainers, and controls.
Job Duty 4 -
Operate, inspect, maintain, repair, replace, and test components of air compressor systems, including piping, valves, and controls.
Job Duty 5 -
May obtain, schedule, coordinate, and reconcile contract resources.
Job Duty 6 -
Provide work direction to Plumber I-level personnel.
Job Duty 7 -
Obtain necessary materials and supplies; may include direct purchase from vendors if authorized.
Job Duty 8 -
Perform other duties as assigned.
Required Qualifications
Educational Requirements
High school diploma, GED Certificate, or Vocational School Diploma
Required Experience
Four to six years of job-related experience Other Required QualificationsValid Georgia Driver's license.
Preferred Qualifications
Preferred Educational Qualifications
Technical Diploma in plumbing or mechanical field
Proposed Salary
Pay Range: $23.78-$32.34/hr.
Knowledge, Skills, & Abilities
SKILLS
This job requires master level skills in the operation and maintenance of internal, external, and underground plumbing and piping systems and components. Ability to operate machine tools, motor vehicles, hand/power tools, and hydraulic/pneumatic equipment is required, as is a working knowledge of building support/maintenance, general construction, utilities, equipment installation, safety procedures, and mathematics. The ability to read prints, drawings, and schematics is required.
USG Core Values
The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).
Other Information
This is not a supervisory position.
This position does not have any financial responsibilities.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position does not require a security clearance. Location: Atlanta, GA
Background Check
The candidate of choice will be required to pass a pre-employment background screening. employment/pre-employment-screening.
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryRegular
Add to Favorite JobsEmail this Job
About Us
Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Job Summary
Perform basic task in the maintenance/upkeep, troubleshooting and minor repair of parking equipment, facilities, structures and lots. This position will interact on a consistent basis with: other maintenance staff and contractors. This position typically will advise and counsel: NA. This position will supervise: NA.
Responsibilities
Job Duty 1 -
Perform basic installation, repair and replacement of parking gate components.
Job Duty 2 -
Perform general maintenance and upkeep of parking lots and garages to include installation and painting of signs and meter poles, layout and stripping of stalls, leaf blowing and trash removal and garage lighting replacement.
Job Duty 3 -
Perform minor repairs to asphalt surfaces.
Job Duty 4 -
Perform preventive maintenance checks and services on assigned vehicles and maintenance equipment.
Job Duty 5 -
Load, unload, move and/or install equipment, fixtures and other items.
Job Duty 6 -
Perform other duties as assigned
Required Qualifications
Educational Requirements
High school diploma, GED Certificate or Vocational School Diploma
Required Experience
One to two years of job related experience
Knowledge, Skills, & Abilities
SKILLS
This job requires ability to operate hand/power tools, motor vehicles (may include sweepers, scrubbers and standard transmission vehicles). A basic working knowledge in equipment maintenance and repair is required. Use of computer applications may be required..
USG Core Values
The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
Other Information
Pay Range: $18.33 - $19.95
Location: Atlanta, GA
Job Grade: C3
This is not a supervisory position.
This position does not have any financial responsibilities.
This position will be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does not require security clearance.
Background Check
Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening
