Pure Barre Class Types Explained Jobs in Usa

MYCO Mechanical is a trusted leader in mechanical contracting, committed to delivering high-quality HVAC, plumbing, and piping solutions across commercial projects. We are built on a foundation of precision, accountability, and innovation. As our Project Manager, you will play a critical role in ensuring the success of our projects from pre-construction through closeout.

Position Summary:

The Project Manager is responsible for the successful planning, execution, coordination, and financial control of mechanical construction projects. This role requires a strong understanding of project documents, construction methods, codes, and scheduling practices. The Project Manager is the primary liaison between MYCO Mechanical and external stakeholders such as General Contractors, Architects, Construction Managers, and regulatory agencies.

Key Responsibilities:

1. Review of Plans & Specifications

• Understand and interpret project goals, means, and methods per contract documents.
• Ensure compliance with local codes and regulations.
• Generate and manage RFIs to resolve discrepancies or conflicts in drawings or specifications.
• Serve as a knowledgeable resource for code and specification interpretation.

2. Project Planning & Scheduling

• Develop a comprehensive project plan and timeline aligned with contractual milestones.
• Forecast manpower needs and apprentice ratios in compliance with labor standards.
• Plan for site logistics including deliveries, material storage, site access, and safety.
• Coordinate with the Accounting Department to establish billing breakdowns and project budgets aligned with AIA billing formats.

3. Coordination

• Align MYCO’s project schedule with the GC/CM’s master schedule and other trades.
• Participate in and represent MYCO in all scheduled project meetings.
• Adapt to changing site conditions, RFIs, weather, and unforeseen delays.

4. Site Management

• Communicate project scope, methods, and schedule to field staff and subcontractors.
• Oversee daily logs, material usage, and manpower reports generated by the Foreman or Superintendent.
• Manage weekly manpower scheduling and site execution strategy.

5. Office Management

• Supervise and support the assigned Project Assistant to ensure compliance with contract requirements.
• Route all equipment and material submissions through the Project Assistant for efficient tracking.
• Coordinate with VDC (Virtual Design & Construction) and Prefabrication teams for accurate submittals and production alignment.

6. Purchasing

• Purchase major project materials and ensure alignment with specifications and budget.
• Approve pricing and specifications for materials procured by the purchasing department.
• Assign and communicate budget codes to the Project Assistant for PO entry and tracking.

7. Change Order Management

• Identify, develop, and negotiate change orders for out-of-scope work.
• Coordinate with Accounting for accurate billing and tracking of approved changes.

8. Subcontractor Management

• Select and hire subcontractors based on cost, capability, and project fit.
• Monitor subcontractor performance for quality, schedule adherence, and labor law compliance.

9. Payment & Time Approvals

• Review and approve vendor and subcontractor payments in Viewpoint.
• Ensure timely approval of time entries for accurate payroll processing.

10. Project Closeout

• Oversee the substantial and final completion phases, including the creation and resolution of punch lists.
• Submit documentation of completed work or provide justification for incomplete items not within MYCO’s scope.

Qualifications:

• Previous mechanical construction project management experience, preferred.
• In-depth understanding of HVAC, plumbing, and mechanical systems.
• Strong knowledge of construction documents, codes, and scheduling.
• Proficient in project management software (e.g., Viewpoint, Procore)
• Excellent organizational, leadership, and communication skills.
• Experience coordinating with BIM/VDC and prefabrication workflows.
• Ability to manage multiple stakeholders and shifting priorities.

MYCO Mechanical is an Equal Opportunity Employer. All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity/expression, age, disability, genetic information, military service, covered/protected veteran status or any other federal, state or local protected class.

Important notice to Employment Businesses/ Agencies

• MYCO Mechanical does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact the human resources department to obtain prior written authorization before referring any candidates to MYCO Mechanical. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and MYCO Mechanical. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of MYCO Mechanical. MYCO Mechanical shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

• Routine blueprint reading and technical writing to accomplish work tasks.
• Daily use of tools such as micrometers, height gauges, Vernier calipers, and dividing heads to support tasking.
• Operate machine tools in varying tolerances according to need (from thousands upwards).
• Non routine maintenance and repair the portable machines tools.
• Routine use of hoisting and rigging equipment for heavy pieces such as forklifts and chain falls
• Responsible for system tolerance determination and application.
• Daily tasking will involve work on the following:
  • Rudders and Steering systems to include blue checking and fitting, piano wire alignment method, stock straightness determination, hydraulic and pneumatic controls.
  • Bearings and Bushings to include lubrication types and methods, piano wire fit and alignment method, dial indicator alignment.
  • Engines, Motors, and Generators: diesel engines, gas or steam turbines, generators, motors, reduction gears, clutches, PTO's, mount arrangements, systems flushing, heat exchanger (shell/tube and plate/frame), heat exchanger and systems leak testing.
  • Propulsion Shafting to include: CPP shafting, hydraulic couplings, clearance (water bearings), wear downs (oil bearings), Piano wire alignment method, dial indicator alignment, FRP spark test, bearing contact determination, shaft straightness (run out) determination.
  • Seals to include gaskets, packing, and \"O\"-rings, lips & labyrinth, mechanical, tightness testing.
  • Valve work: leak testing, seat types, packing/gasketing/lubrication, lapping, seat types (materials and types).
  • Propellers to include Keyed, Tapered, Flanged & Key fits- Solid and Built, CPP Systems, Polishing.
  • K. Pumps to include Valving (internal & external), Bearing & Sealing arrangements, Alignment (dial indicator & laser).
  • Deck machinery: gear boxes, bearings/seal arrangements, alignments, drivers (electric, mechanical, or hydraulic), sheaves, cables, turrets, booms
• Instruct lower classes of machinists, manage work/personnel assignments and the requisition of job materials.
• Upholding a safe work environment is key daily tasks require safe handling/use/storage of gasses; safe work practices; PPE; tank safe opening practices; lock-out/tag-out; confined space practices; respirator/harness fit; oil spill response.
  

• Must have a high school diploma or equivalent and at least seven (7) years of experience as a Machinist.
• Must have experience with manual lathes and mills.
• Must be able to read and comprehend blueprints, drawings and other technical trade related documents
• Must have adept mechanical ability, manual dexterity, and hand/eye coordination required to perform various projects, per drawings, sketches, and verbal or written instructions.
• Must have clean driving record.
  

• Technical training preferred.
  

• Position requires you to gain and maintain access to government and military installations, often requiring completion of stringent background checks and screenings.
• May require the ability to obtain and maintain appropriate level of security clearance depending on the contract.
• Must be able to provide proper documentation as needed to process access/clearance (e.g. birth certificate, identification card, etc.).
  

• Frequent Travel; 50% or less.
• International travel required on a nonstandard routine.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• May ride ships at sea for extended periods
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
• Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.
  

• Disassembles various types of equipment and machinery common to maritime vessels and/or general industry including but not limited to pumps, valves, winches, gear boxes.
• Assists in determining repairs and required to bring equipment to rebuilt status.
• Setup and operation of drill presses.
• Applies knowledge of materials including but not limited to bronze, brass, steel (mild and heat-treated), and stainless steels in fabrication and repairs.
• Responsible for the application and care of all standard shop measuring and hand tools.
• Properly cares for and safely uses hand and power tools and all company property.
• Works with other crafts as needed.
• Overhaul, maintenance, testing of pumps, valves, turbines, condensers, shafts, rudders, winches.
• Lays out passage holes on bulkheads, decks, and other surfaces for connections, such as shafting and steam lines.
• Installs below deck auxiliaries, such as evaporators, stills, heaters, pumps, condensers, and boilers and connects them to steam pipe systems.
• Remove, repair, modify or overhaul various types of marine shipboard equipment and system such as valves, pumps, hydraulics, turbines, reduction gears, generators, anchor windlass and steering gears.
• Set up and operate portable machining tools and equipment.
• Troubleshoot and repair a variety of mechanical equipment may include ANSI pumps, various types of compressors, blowers, fans, gearboxes, extruders, mixers, agitators, and blenders.
  

• Must have a High School Diploma or equivalent and at least seven (7) years' experience as a Marine Outside Machinist.
  

• Must be able to dissemble, repair, and install various types of equipment and machinery such as pumps, valves, winches, and gear boxes.
• Must be capable of reading and interpreting blueprints and schematic drawings.
• Must have own tools.
• Must be able to apply basic machine shop math.
• Must have the ability to work at heights, in confined spaces and observe ships working protocol.
• Must demonstrate layout proficiency.
  

• Minimal Travel; 10% or less.
  

• Must be able to access Government facilities and be DBIDS eligible.
• Position requires US Citizenship.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• May ride ships at sea for extended periods.
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
• Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.
  

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid orientation
• Paid time off
• Pet rider program
• Referral program
• Vision insurance

• Company driver
• Solo driver

• Examines blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
• Perform complex operations on various machine tools, including drill presses, lathes, milling machines, boring machines, and precision grinding machines.
• Measure, mark, and scribe dimensions and reference points on material or work piece as guides for subsequent machining.
• Read precision instruments such as micrometers, calipers, and indicators.
• Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers.
• Select standard materials required for fabrication and machining work.
• Perform the machining operations, watch for problems in the production process, and check the accuracy of the finished piece against blueprints / verify conformance of finished work piece to specifications.
• Observe equipment to detect malfunctions or out-of-tolerance machining, adjust equipment controls as necessary, and verify accuracy of machine settings or programmed control data.
• Set up and operate all types of shop machining tools or equipment to manufacture various parts.
• Verifies dimensions and alignment of assembly, assembles parts into complete assembly.
• Install machined replacement parts in mechanisms, machines, and equipment, and tests operation of unit to ensure functionality and performance.
• Develops specifications from general description and draws sketch of part or product to be fabricated.
• Confers with engineers, production personnel, programmers, or others to resolve machining or assembly problems.
• Work includes small and large assembly, and machining of heavy steel.
• Apply knowledge of mechanics, shop mathematics, machinability of materials, and machine shop procedures
• Perform machine maintenance and is responsible for keeping work are clean and the immediate reporting of safety issues to Supervisor.
• Use various hand and power tools for the completion of job tasks.
• Work independently to complete responsibilities.
• Other duties as assigned.
  

• Must have ability to read and interpret blueprints, drawings, and other technical trade related documents.
• Must have at least five (5) years of experience operating manual OR CNC lathes and milling machines.
• Must have Manual Machinist experience as follows:
  
  • Under minimal supervision, a manual machinist sets up and operates manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair, and alteration of machinery, machine parts, tools, and equipment.
• Must have CNC Mills & Lathes experience as follows:
  • Requires knowledge of some CNC programming with the ability to perform minor program edits on the shop floor. Requires more than CNC operation experience.
• Must have mechanical ability, manual dexterity, and hand/eye coordination required to perform various projects, per drawings, sketches, and verbal or written instructions.
• Must be familiar with the use of precision measuring instruments: outside/inside micrometers, depth mics, venires, etc.
• Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the parts and assemblies being worked and recommendations for repair.
• Must be familiar with threading and the various measuring/gauging requirements.
• Must be skilled in the selection, set-up, and operation of the appropriate tool(s) for a given type of work.
• Must be able to work effectively with others.
• Must be a steady, reliable worker.
• Must be able to perform duties with minimal supervision.
• Must have own tools.
• Must have regular, reliable attendance.
  

• Forklift and overhead crane experience preferred.
• Knowledge of CNC programming preferred.
  

• Minimal Travel; 10% or less.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
  

• 
  
• Schedule: First Shift starting between 5am and 8am, Mon-Fri
  
• Pay: CDL Driver will Average pay $31/hr, weekly pay will average $1200 plus 10-15 hrs OT
  
• Overtime: CDL Driver will be paid OT After 40 hours
  
• Location: New Brighton, MN area
  
• Driving Area: Local / Home Daily
  
• Stops per Day: Flatbed driver will average 2-4 stops a day
  
• Hauling: CDL Driver will haul 10,000 pound coils and occasionally building materials
  
• Transmission: Manual
  
• Trailer Type: Traditional Flatbed Class A CDL
  

• 
  
• Verifiable Experience within 3-years
  
  • 
    
  • 2-years Tractor Trailer experience
    
  • with at least 1-year of Flatbed experience with chaining/strapping/tarping.
    
  
  
  
• Acceptable MVR and Accident History
  
• Good Work History
  
• We offer Medical / Dental / Vision benefits for our CDL driver and their families. We truly put our CDL driver first. Apply today and we will call you within 24 business hours.
  

• 
  
• 2 Years Verifiable CDL Truck Driver Tractor Trailer experience with at least 1 Year Flatbed Experience in the last 3 Years
  
• Acceptable MVR and Accident History
  
• Good Work History
  
• Valid Medical Card
  

Regional Positions Safe operation of a TADC with a 53' dry van. New equipment, state of the art technology, 80% drop and hook.

Safe effective, and efficient delivery of goods

Home daily

Safely operate a TAS with 53' dry van.

Performs all duties in accordance with Corrugated Logistics policies and procedures, and complies with all federal, state, and local regulations for the secure and safe operation of a commercial motor vehicle (CMV).

An offered load cannot be refused.

Conducts a thorough pre-trip inspection of the equipment assigned as prescribed by the Federal Motor Carrier Safety Administration (FMCSA) and the company.

Inspect tractor and trailer for defects during and after trips and submit a written report on the condition of the tractor and trailer at the end of each trip.

Safely operates tractor trailer equipment in different configurations as assigned, with varying weights as allowed by law, under all types of climatic conditions, terrain, road conditions and traffic situations, in urban and rural settings, for extended periods of time, over long distances, either direct or by way of other intermediate points in accordance with all federal, state and local laws and regulations as well as Corrugated Logistics policy.

Drop, hook, spot, switch and otherwise interchange equipment, including the hooking and unhooking trailers from the tractor itself and the pushing, pulling, placing, lifting and attaching or detaching of various types of converter gear when necessary. Also includes the raising and lowering of the landing gear on semi-trailers.

Ensures that all required shipping documentation accompanies all deliveries.

Properly secures or re-secures the cargo as required.

Frequently communicates with Dispatch/Operations, in person or by way of PeopleNet, or phone, in order to advise of stops, movements, problems with equipment, cargo, delays, etc.

Reports all accidents or incidents involving driver of company equipment. Be able to provide initial contact with public safety or law enforcement officials and the general public when involved in traffic accidents or incidents.

Report any moving violations received in both CMV or personal vehicle.

Properly maintains a driver's log electronically in accordance with FMCSA and Corrugated Logistics requirements. Remains knowledgeable of own hours of service at all times and reports discrepancies or potential violations to Corrugated Logistics Operations immediately.

Properly and efficiently complete all necessary paperwork including inspection reports, manifests, bills of ladings, trip pay reports, trip fuel and mileage reports, accident reports and any other report or record required by law, regulation or Corrugated Logistics policy.

Verifies all shipping documentation against the load information provided by dispatch. Note in writing any overages, shortages or damage and seal intact when arriving at delivery.

Performs roadside inspections as required by the law, various administrative agency regulations and Corrugated Logistics policy.

Works in adverse weather conditions without temperature or other environmental controls and subject to ambient weather conditions.

Performs work required in a timely manner and maintains adequate production in order to meet service schedules.

Communicates in a professional manner with persons whom the driver is in contact with as a company representative.