Psc Crane Rigging Jobs in Usa

Aircraft Maintenance Technician (A&P)

Company: flyADVANCED

Location: KXLL – Allentown, PA

Primary Aircraft: Piper P100 Fleet

Compensation

• Hourly pay range $25-$45 per hour, based on experience.

About the Role

This position is part of the flyADVANCED maintenance team based at KXLL. While flyADVANCED operates separately from the flight school, this role exists primarily to support flyGATEWAY Flight School operations by maintaining a high-utilization general aviation training fleet.

The role is hands-on and maintenance-driven, ideal for technicians who enjoy working in a fast-paced environment focused on piston aircraft, preventative maintenance, and operational reliability rather than turbine or airline-style operations.

Our maintenance team plays a critical role in keeping the Piper P100 fleet safe, compliant, and mission-ready to support daily training operations.

Responsibilities include, but are not limited to:

• Perform scheduled and unscheduled maintenance on Piper P100 training aircraft
• Conduct 100-hour and annual inspections in accordance with FAA regulations
• Troubleshoot and repair airframe, powerplant, and basic avionics discrepancies
• Remove, install, rig, and operationally check aircraft components and systems as required
• Accurately complete maintenance records, logbook entries, and work orders in compliance with FAA and company standards
• Coordinate with flight school leadership to minimize aircraft downtime and maximize availability
• Work collaboratively with other technicians to ensure safe, efficient, and high-quality maintenance outcomes
• Maintain a clean, organized, and safety-focused maintenance workspace
• Support aircraft return-to-service and overall operational readiness

Additional Information

• This position is based at our KXLL facility supporting a dedicated Piper P100 training fleet
• The maintenance team operates in a high-utilization flight school environment with a strong emphasis on safety, reliability, and documentation accuracy

Qualifications / Skills

• Current FAA Airframe and Powerplant (A&P) Certificate
• Experience maintaining piston single-engine aircraft
• Strong troubleshooting skills across mechanical, electrical, and basic avionics systems
• Ability to work independently and as part of a team
• Excellent attention to detail and maintenance documentation accuracy
• Strong organizational and communication skills
• Ability to work flexible schedules, including occasional weekends

Preferred Qualifications

• Flight school or general aviation experience in a high-utilization setting
• Familiarity with Piper aircraft; P100 experience a plus
• Inspection Authorization (IA) preferred but not required
• Basic avionics troubleshooting experience

What We Offer

• Stable, consistent workload in a flight school support environment
• Supportive team culture focused on safety and professionalism
• Opportunities for growth as flight operations continue to expand

Position Summary

We are seeking a driven, field-focused Sales Representative to grow our Capillary, Gauge and Electrical Submersible Pump (ESP) spooling services business across the Bakken. This role is responsible for developing new customer relationships, expanding existing accounts, and driving revenue growth with E&P operators, artificial lift teams, and service companies.

The ideal candidate understands artificial lift operations, field execution logistics, and the urgency of Bakken operations. This is a high-visibility role requiring strong technical knowledge, commercial acumen, and field presence.

Mission

Own the territory. Take market share. Win new business.

We are looking for a high-motor, competitive sales hunter to aggressively expand our Capillary, Gauge and ESP Spooling footprint across the Bakken. This is not an account maintenance role — this is a frontline market capture position.

You will be expected to open doors, displace competitors, and convert opportunities into immediate revenue.

Key Responsibilities

Business Development

• Identify and develop new opportunities for capillary string deployment/spooling, downhole gauge system deployment/spooling and ESP cable spooling services.
• Build relationships with production engineers, artificial lift teams, completions engineers, and field foremen.
• Generate and manage a qualified sales pipeline across Bakken operators.
• Increase market share within existing accounts.

Core Responsibilities

Territory Domination

• Identify every operator and ESP provider running in your territory.
• Target underperforming competitor accounts and develop displacement strategies.
• Relentlessly pursue new drilling, completion, and artificial lift programs in the field.

Aggressive Prospecting

• Minimum weekly field visit targets.
• Cold calls, yard visits, rig site drop-ins, production office meetings.
• Develop relationships with production engineers, artificial lift teams, completions managers, and field supervisors.

Revenue Conversion

• Rapid quote turnaround and bid follow-up.
• Close jobs with urgency.
• Coordinate tightly with operations to ensure execution speed.
• Turn first jobs into multi-well programs.

Account Management

• Serve as primary commercial point of contact.
• Coordinate with operations management.
• Assist in pricing strategy, bid preparation, and negotiations.
• Support post-job follow-up to ensure customer satisfaction and repeat business.

Technical & Field Support

• Understand capillary injection systems, chemical delivery strings, gauge monitoring systems, and ESP cable handling requirements.
• Periodically as needed, attend field jobs, in an observatory role, for the purpose and support of customers and to strengthen customer relationships.
• Gather market intelligence and customer activity.

Reporting & Planning

• Maintain CRM records and accurate sales forecasts.
• Develop territory growth plans with measurable targets.
• Participate in weekly sales and operations meetings.

Qualifications

Required

• 6+ years of oilfield sales experience, preferably in artificial lift, downhole gauge, ESP spooling, capillary spooling, wireline, or related completion services.
• Strong understanding of the Bakken operations and operators.
• Established relationships with operators and service companies in the Bakken.
• Proven track record of revenue growth and new account acquisition.
• Willingness to travel locally in the Bakken and be in the field frequently.

Preferred

• Experience with:
• Capillary string deployment/spooling
• Downhole Gauge deployment/spooling
• ESP cable spooling
• Artificial lift systems
• Technical degree or equivalent oilfield experience.

Skills & Competencies

• Strong relationship-building ability
• High sense of urgency and responsiveness
• Commercial negotiation skills
• Operational awareness and problem-solving
• Self-starter with entrepreneurial mindset

Compensation & Benefits

• Competitive base salary with potential for commission/performance-based incentive structure
• Company truck
• Phone allowance
• Health, dental, and vision benefits
• 401(k) with company match

What You’ll Be Measured On

• New account penetration
• Revenue growth month-over-month
• Market share capture in the Bakken
• Speed from first contact to first job
• Activity metrics (calls, field visits, bids submitted, close rate)

This is a numbers-driven role.

Benefits:

• 401(k) and matching
• Health insurance
• Dental insurance
• Vision insurance
• Supplemental insurance
• Employee assistance program
• Flexible spending account
• Health savings account
• Life insurance
• Paid time off
• Holiday Pay

***Flowco provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, parental status, protected veteran status, sexual orientation, gender identity or expression, political affiliation, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

PO&G Resources is a rapidly growing, twenty-six-year-old private oil and gas company. With the ongoing expansion of our operations across multiple areas within the company is hiring a Production Foreman to manage its oil and gas operations in Central Oklahoma.

Basic Function:

The foreman’s role is to oversee overall execution of activities in support of ongoing well maintenance and production. The ideal candidate will be an experienced, safety focused, quality centric employee with a strong work ethic and a persevering, get-it-done attitude.

Responsibilities include:

· Monitoring lease production.

· Identifying lost production by diagnosing individual well performance.

· Providing oversight of vendors, contractors, and work tickets.

· Supervision of well work including rigs, wireline, cementing, acid and plugging crews.

· Communicating lease and well problems and developing remedies.

· Implementing solutions to address well and battery problems.

· Implementing regular well testing.

· Ensuring safe and environmentally responsible operations by monitoring and responding to tank battery alarms.

· Reviewing and executing engineered projects in the field.

· Working with engineering personnel and management to develop targets and actively monitor actual production to aggressively undertake corrective actions as warranted to ensure consistent production twenty-four hours a day, seven days a week.

· Working with the team of field personnel to provide strategic, technical, and operational perspective to the team.

Location: Central Oklahoma

Qualifications:

· Minimum 3 years' experience as a production foreman or assistant foreman required

· Oil and gas experience MANDATORY

Skills and Competencies:

Represent company in a positive, professional manner at all times and in all interactions

Strong problem-solving skills

Effective written and verbal communication skills

Well-organized, with an ability to prioritize activities and employ effective time management principles

Ability to make sound, reasoned judgements and decisions under pressure

High level of initiative, self-discipline, and dependability

Ability to give direction, adapt to change and assume responsibility for outcomes

Competency with Microsoft Office – most importantly Excel, Word, and Outlook

Additional Details:

Must have the right to work and remain in the United States without sponsorship

Successful candidate must be willing to complete a background check and drug screen

Company Description:

PO&G acquires conventional and unconventional oil and gas properties and increases their value by improving operations such as artificial lift, water flood optimization, and vertical infill drilling. The company's current oil and gas properties are located in: Texas, Oklahoma, Colorado, Kansas, Indiana, Wyoming, North Dakota, Utah and Mississippi. West Texas, Indiana, and Oklahoma are the company's largest operating regions. Current gross / net production is 5,000 / 3,500 BOE/D. The company plans to continue its historical growth rate by doubling production every three years.

The company thrives as a result of its opportunistic, entrepreneurial culture, and has attracted select, high-impact personnel from a variety of oil companies and Wall Street firms. Company employees have the opportunity to involve themselves in a broad range of new activities as properties are acquired, providing constant challenge and growth opportunities. Direct exposure to management ensures a rewarding, non-bureaucratic work environment.

Additional company information is available at

Pride Health is seeking a Process Mechanic for one of the world's largest healthcare manufacturing organizations, helping pharmaceutical, biotech and nutrition companies to bring their treatments to market.

Job Title: Process Mechanic

Location: Vacaville, CA 95688

Job Type: Contract

Length: 12-Months

Pay Rate: $39.00 - $44.95 per hour

2 Night Shift roles available: Front and Back Day shifts

Front = Saturday - Tuesday (Saturday is the rotating 3-4-3 day)

Back = Wednesday - Saturday (Saturday is the rotating 3-4-3 day)

Mandatory day shift training for the first 10 weeks. Mon - Fri 8 hours/day

4 Day Shift roles available: Front and Back Day shifts

Front = Sunday - Wednesday (Wednesday is the rotating 3-4-3 day)

Back = Wednesday - Saturday (Wednesday is the rotating 3-4-3 day)

Overview:

The primary responsibility of a Process Mechanic is to maximize equipment availability for processing by safely maintaining equipment through, Preventive and Corrective maintenance and repairs. In support of these activities, Process Maintenance provides personnel 24/hours/day, 7 days per week for maintenance, discrepancy response, contractor oversight, vendor resource management, project support and training. All Process Mechanics are trained to perform routine maintenance in the primary manufacturing support areas and Materials Management, Quality Control Labs, and Utility Operations.

Responsibilities:

• Repair and repetitive maintenance of valves, centrifuges, pumps, autoclaves, washers, tanks, and associated piping.
• Exhibit detail-oriented documentation skills to ensure Right-First-Time operations.
• Escalate process issues as necessary to ensure resolution of issue.
• Comply with cGMP, SOP and manufacturing documentation.
• Timely completion of tasks and work orders with appropriate documentation -according to standard operating procedures, applicable standards, guidelines, practices, and policies.
• Safe operation of tools and shop equipment, and safe execution of work in the field.
• Computer skill level appropriate to navigate and use corporate intranet and related applications, CMMS, and standard word processing and spreadsheet programs.
• Cross functional interaction with Manufacturing, Quality, Technology, Engineering, and other departments to ensure satisfactory performance of equipment and systems.
• Assistance with systems start-up and validation.
• Collection and organization of technical data from equipment manufacturers, equipment users, and engineering personnel.
• Assistance with identification, Purchase and organization of spare parts.
• Train other mechanics in group and individual settings.
• Ability to read and understand Piping and Instrumentation Drawings. (P&ID)
• Evaluate, review Standard Operating Procedures content and red line where appropriate.
• Comply with all Lock out tag out policies.
• Perform confined space entries.
• Work at heights to access valves and lock out points.
• Rebuild pumps, valves, bearing assemblies, and mechanical seals.
• Perform safety inspections of rigging and fall protection equipment.

Requirements :

• High School Diploma.
• 5–6 years of relevant experience.
• Strong understanding of industrial process maintenance and systems.
• Ability to lift up to 50 lbs with reasonable accommodations.
• Valid driver's license.

Benefits that Pride Health offers:

Pride Health offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors.

Apply Today! If you are interested in the position, please email your resume to -health.comfor immediate consideration.

A Snapshot of Your Day

The primary purpose of this position is to prepare parts, operate equipment and processes for the application of Thermal Spray on component parts. The process can be manual and include automation, combined with multiple varying parameters to produce specific thermal coating structures.

How You'll Make an Impact

* Operate controls to activate robots and apply gases/powders for coating structures that meet specifications, while also preparing and post-processing components for Thermal Spray.

* Utilize surface preparation equipment and perform manual tasks such as masking, part conditioning, and blending as needed.

* Maintain equipment functionality by adding media/powder, checking barrels, changing nozzles/hoses, and ensuring proper fluid levels and alignment.

* Interpret technical documents (drawings, blueprints, specifications) to determine necessary tools for operations and ensure compliance with Siemens standards.

* Load/unload parts using authorized material handling devices and assist with crane operations, while maintaining detailed records and adhering to quality checks.

* Maintain a clean work area through preventative maintenance, proper storage of tools, and assist co-workers as needed, adapting to shifting priorities and team dynamics.

What you Bring

* Operation and knowledge of the following is required

* Preparation of components including masking, surface protection of surfaces from overspray, operation of Surface Preparation machines and post processing of residual overspray and surface finish.

* Operation and control Robotics, including toolpath of robots and flow control of gas fuels. Adjustments to programs and gas flows to control desired Thermal Spray results.

* 2-4 years of CNC experience operating robotics and auxiliary equipment.

* HS Diploma or GED Requited

* Applicants must be authorized to work in the US without the need for sponsorship.

Other Key Requirements

* Successful applicants must pass standard hearing, vision, and pulmonary function tests. Career Readiness/Work Keys Certificate - Silver Status required

About the Team

Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.

Who is Siemens Energy?

At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 100,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we’re also using our technology to help protect people and the environment.

Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.

Check out this video to learn more about Siemens Energy: [1] * Career growth and development opportunities

* Supportive work culture

* Company paid Health and wellness benefits

* Paid Time Off and paid holidays

* 401K savings plan with company match

* Family building benefits

* Parental leave

$19.25/hr

As an Animation Technician, you'll inspect and repair the animatronics, ride lighting, and ride show elements at Cedar Point. You'll also..

• Adapt to a wide variety of projects including pneumatic systems, prop controllers, waterpark equipment, animatronic systems, fiberglass, welding, fog systems and much more.
• Be responsible for the inspection, on-site repair, and general troubleshooting of these systems.
• Work under the supervision of the full-time technicians, foreman, and supervisor to grow your skills as a team member

Cedar Point provides premiere entertainment with 200+ acres of FUN and we want YOU to join us in making people happy. As a member of our team, you’ll…

• Make our guests happy by delivering amazing experiences and helping them create lifelong memories.
• Interact with different people of all ages and backgrounds.
• Gain skills, knowledge and experience that will benefit your future.

• High school graduate or GED.
• Must have valid driver’s license.
• Must join Laborers Union.
• Must provide own hand tools.
• Basic understanding of electrical equipment and pneumatic systems.
• Experience with animatronics and animatronic prop controllers preferred.
• Able to work at heights including catwalks, aerial lifts, crane baskets, scaffolding, and structure climb.
• Willing to work various shifts and days with the ability to work nights, weekends, and holiday periods to meet business needs.