Psc Crane Rigging Jobs in Usa

Title: 911 Emergency Medical Technician - EMT

Location: Lindenwold, NJ

Employment Type: Full-time

Pay Rate: $22.50 - $25.50 per hour, based on experience

Pay and Bonus Incentives:

• $7,000 sign-on bonus for full-time
• $8,000 sign-on bonus for full-time (military veterans)
• Competitive Productivity Bonus for every shift
• Night Shift Differential
• Overtime pay opportunities
• Referral Bonus opportunities (refer EMTs and/or Paramedics)

Benefits:

• Competitive Compensation (see above)
• Medical, Dental, and Vision (with company contribution), PTO - Paid Time Off, and 401k for full-time
• Room for advancement
• Weekly pay
• Free Continued Education
• Power Stretchers + top of the line equipment
• 12 hour shifts

About Ambulnz by DocGo: DocGo is leading the proactive healthcare revolution with an innovative care delivery platform that includes mobile health services, population health, remote patient monitoring, and ambulance services. DocGo disrupts the traditional four-wall healthcare system by providing high quality, highly affordable care to patients where and when they need it. DocGo's proprietary, AI-powered technology, logistics network, and dedicated field staff of over 5,000 certified health professionals elevate the quality of patient care and drive efficiencies for municipalities, hospital networks, and health insurance providers. With Mobile Health, DocGo empowers the full promise and potential of telehealth by facilitating healthcare treatment, in tandem with a remote physician, in the comfort of a patient's home or workplace. Together with DocGo's integrated Ambulnz medical transport services, DocGo is bridging the gap between physical and virtual care.

Responsibilities:

• Collaborate with your fellow EMTs and management to assure top tier patient care.
• Be flexible as emergency services operate on a 24-hour clock - your work shift schedule may vary due to the nature of the business.
• Remain up to date with current standards of care, including equipment functions and uses and all certifications, licenses and registrations.
• Conduct yourself in a courteous, helpful, and professional manner when dealing with patients, co-workers, supervisors, and the public.
• Recognize and treat any medical condition with appropriate techniques, equipment, and knowledge of all State and County protocols.
• Provide top tier medical transport to medical facilities by assuming responsibilities for medical care of the patient and carrying out established policies and procedures.
• Operate and drive the ambulance in accordance with safety policies and laws, showing due regard for all applicable State and Regional Regulations (DMV & DOH)
• Maintain rig cleanliness by stocking the rigs and taking ownership of your space.
• Gather patient billing information and appropriate billing signatures.
• Prepare and submit a pre-hospital patient care report.
• Respond promptly to assignments as required by the Dispatch Center.
• Excellent verbal communication skill

Qualifications:

• NJ State Certification or NREMT (minimum)
• Valid Driver's License and acceptable driving record (must have had driver's license for a minimum of 2 years)
• Valid CPR Card for the Health Care Provider
• Must be able to lift, push and pull 125 lbs. or more
• At least 2 years of experience as an EMT (required)
• Experience and comfort driving a box truck (preferred)
• Previous 911 or CCT experience OR experience on an ALS transport vehicle in which you as the EMT were involved in patient care
• Successfully complete Physical Aptitude Test

Job Description

Looking for engineers to develop small gas turbine engines. Our goal is to provide energy dense designs that deliver performance according to program inputs. There are multiple engineering positions available. We are looking for those who want to contribute to the team and take ownership in getting the job done. Specifically, for the Senior Design Engineer role, we are looking for an experienced turbomachinery designer who will own the engine designs from clean sheet to production, support test rig designs and who will work closely with our manufacturing team. Experts in the field who can wear multiple hats in our dynamic development environment are desired. If you are interested in a challenging and exciting project and have experience in the areas described below, please feel free to apply. At this time, we do not have any new grad or intern level roles open but check back in the future. U.S. persons only please.

Responsibilities:

• Support engine development from cradle to grave.
• Join a world class team to deliver propulsion at scale.
• Creation of 3D geometry and entire rotating assemblies for engine components.
• Optimize designs for thrust to weight ratio and for DFx.
• Conduct structural analysis, fatigue modeling and life estimation as needed.
• Iterate with other engineers and manufacturing to optimize systems.

Qualifications:

• Bachelor’s degree or higher in Mechanical or Aerospace Engineering.
• Minimum 6-8 years of experience in gas turbine design, jet engine. development, or high-speed rotating machinery.
• Experience in rotating assembly and static structure design.
• Experience with the relevant materials, alloys, and manufacturing methods to produce turbomachinery designs.
• Proficiency in CAD tools such as NX, SolidWorks, CREO, CATIA, Onshape, Fusion 360 or Polyworks.
• Familiarity and experience working in Teamcenter or Windchill is strongly desired.
• Ability to work well in a fast-paced team environment is a must.

Preferred Experience:

• Working specially with jet turbines, UAS and directly relevant programs.
• Hands on experience with cold and hot gassing of experimental turbomachinery designs.
• Experience with turbomachinery test rig development.

The salary range above is an estimate only with final amount being dependent on a wide variety of factors. All roles include a generous equity package and the following benefits:

• Platinum Healthcare Benefits with comprehensive medical, dental, and vision plans at no cost to you.
• 100% covered Basic Life/AD&D and long-term disability insurance
• Unlimited PTO
• Lunch and fully stocked kitchen
• Relocation assistance (depending on role eligibility).

POSITION SUMMARY

The Tooling Warehouse Manager is responsible for controlling, maintaining, and optimizing all tools, equipment, and related inventory that support field operations. This role ensures that crews have the proper tools in proper condition while controlling costs and reducing downtime. This role also ensures that all company and government regulated safety standards are met.

POSITION FUNCTIONS

• Manages all current and incoming tooling inventory supporting transmission, distribution, and substation crews. Maintains accurate counts of hot-line tools, rubber goods, rigging, hand tools, power tools, and transmission equipment.
• Tracks tool condition, certifications, and replacement cycles, and coordinates testing and recertification as required.
• Administers and maintains the Yardz asset management system.
• Stocks and outfits line trucks, bucket trucks, diggers, and service vehicles based on crew type, customer specifications, and project scope.
• Works with multiple vendors to procure new tooling, replacement parts, PPE, rubber goods, and rigging. Coordinates specialty tooling rentals as needed and maintains strong vendor relationships to support pricing and availability.
• Maintains working knowledge of small engine repair and upkeep, including chainsaws, generators, air compressors, hydraulic power units, and pumps. Coordinates repairs internally or through third-party vendors and manages service schedules.
• Supervises and leads a warehouse team of 3–5 employees. Assigns daily responsibilities, provides coaching and performance feedback, and ensures safe work practices and compliance within the warehouse and yard.
• Maintains constant engagement with field leadership, including General Foremen, Superintendents, and Project Managers. Supports urgent tooling needs, storm mobilizations, and jobsite deliveries and returns.
• Oversees organization, storage, and security of the warehouse and laydown yard, including poles, wire, hardware, reel stands, and construction materials.
• Ensures all tooling and equipment meet OSHA, ASTM, IEEE, and company safety standards. Maintains inspection documentation and supports safety audits as needed.
• Prepares reports as needed.
• Other duties as assigned.

EDUCATION AND EXPERIENCE REQUIREMENTS

• High school diploma or GED.
• 3+ years of warehouse, inventory, or tool management experience.
• Experience in construction or electrical contracting preferred.
• Previous management experience, a plus.

KNOWLEDGE, SKILLS, AND ABILITIES

• Strong experience in Microsoft Office, specifically Excel.
• Organized with a strong attention to detail.
• Strong ability to identify and solve issues.
• Solid written and verbal communication skills.
• Strong interpersonal and customer service skills.
• Self-motivated.
• Excellent project management skills, capable of handling multiple projects concurrently with good time management.
• Ability to build and foster relationships with team members.
• Ability to conducts self in an appropriate manner as a representative of SEC, working effectively in a diverse work environment.
• Valid drivers license required.
• OSHA certifications and forklift certification preferred.

TRAVEL REQUIRED: Minimum

WORKING ENVIRONMENT/PHYSICAL REQUIREMENT: This position will work in a warehouse setting and will be required to liftand carry up to a minimum of fifty pounds. The position will require standing for long periods, bending, and crouching.

NOTE: This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Duties, responsibilities, working conditions, physical demands, and activities may change or new ones many be assigned at any time with or without notice.

Service Electric Company provides Equal Employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Restoration / Façade Project Manager – New York City

About the Company

One of the leading restoration contractors in New York City, specialising in façade restoration, exterior envelope repairs, and Local Law 11 projects. The company is known for delivering high-quality work on commercial, institutional, and landmark buildings across the city.

Responsibilities

• Manage façade and exterior restoration projects from start to finish
• Oversee project planning, scheduling, budgeting, and subcontractor coordination
• Ensure compliance with Local Law 11, DOB regulations, and safety standards
• Supervise field operations including rigging, scaffolding, and site logistics
• Coordinate with clients, architects, engineers, and inspectors
• Track project progress, costs, and change orders to ensure on-time delivery
• Lead site meetings and manage project documentation and reporting

Experience Required

• Minimum of 5 years’ experience in façade or exterior restoration within New York City
• Strong knowledge of Local Law 11 (FISP) and NYC building codes
• Proven background working for a reputable commercial restoration contractor
• Hands-on experience with rigging, scaffolding, and exterior access systems
• Excellent organizational and communication skills
• Ability to manage multiple projects and teams simultaneously

This is an opportunity to join a growing contractor with an excellent company culture with significant room for growth and career progression.

Job Summary:

Loenbro Southwest is seeking a Superintendent to be the primary job site supervisor for the assigned scope of supply with operational responsibility for employees involved in the direct installation, alteration, additions of a construction project. Superintendents are responsible for ensuring the safety, quality, and efficient execution of their assigned scope of work.

Superintendents coordinate and manage on-site activities, as well work with project teams including Project Managers, Project Engineers, Front Line Supervisors, Field Personnel and other office departments as required, to deliver successful projects to our clients.

Supervisory Responsibilities:

• Management and direct supervision of work crews on-site including:
• Assist in the mentoring and training field personnel.
• Manage and assist project foremen to ensure they have all required resources and information to perform their tasks effectively and efficiently.
• Provide performance evaluations of field personnel.
• Manage the overall safety of the project and ensure all personnel have resources to perform their work safely.
• Ability to manage multiple projects over multiple locations

Duties/Responsibilities (Essential Functions):

• Understand contract terms, conditions, and scope of supply.
• Manage and maintain professional relationships with client, direct reports, and Project Manager.
• Ensure all required materials, equipment, and inspections occur to support the project schedule.
• Responsible for site safety. Ensure the overall job site is safe for workers and visitors as well as manage compliance with established company safety policies.
• Work with the project teams to budget, forecast, and manage field personnel as well as management of labor, equipment, materials, tools, and other cost considerations.
• Prepare work plans and develop temporary facilities for the project.
• Understand, review, and manage project plans, specifications, and manufacturer's data and execute project based upon said documentation.
• Review construction documents for completeness and constructability.
• Manage the overall project and 3-week look ahead schedules, including updating the master schedule on a weekly basis.
• Work with the Project Engineer to generate RFI's (Requests for Information) as required to ensure completeness of the project documents and identifying and clarifying any discrepancies.
• Review submittals for compliance with project manual and plans, manufacturer's recommendations and code, or other standards as applicable.
• Work with the project team to manage the company’s quality control program for the project.
• Conduct preconstruction planning.
• Conduct on-site project meetings with subcontractors and construction trades lead personnel.

Additional Responsibilities:

• Performs other related duties as assigned.
• Travel when required for the job.
• Per diem for 60 miles or more from office.

Knowledge Skills And Abilities:

• Independent and self-motivated.
• Understands and is willing to manage multiple projects at once as necessary. The role of the Superintendent is ultimately to assist the Field Division General Superintendent, Field Division Project Engineer, and Field Division Project Manager. These individuals have the responsibility and oversight of all projects being completed by the Field Division.
• Ability to understand program objectives, performance goals and assess progress.
• Ability to collaborate with all aspects of a construction organization and communicate with all levels of project hierarchies.
• Technical understanding of a project scope and the ability to find solutions to potential deficiencies within a project scope.
• Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists.
• Ability to put a lift plan together
• Understand Load charts and equipment capabilities.
• Ability to read erection and fabrication drawings.
• Understanding and knowledge in advance rigging/bull rigging.

Education and Experience:

• At least 2-3 years’ field leadership in the industry.
• Osha 10 minimum, Osha 30 preferred
• Knowledgeable in Welding procedures and quality.

Physical Demands:

• Ability to be on feet, navigate uneven walking surfaces, and climb stairs / ladders for long periods of time over a large footprint. Must be able to sit a desk at a computer station for extended periods. Willing/able to work multiple project work schedules.
• Must be able to lift up to 45 pounds at times.
• Typical work schedule is 5-10hr days. Depending on job schedule with the possibility of 12hr days and weekend work.

Work Environment:

• This position requires the successful candidate to work on the project site full time Monday – Friday, with weekend work as required to maintain schedule.
• Employees may be exposed to hand tools, power tools and other equipment with high noise producing conditions.

What do we offer?

• Health insurance
• Dental insurance
• Life insurance
• Vision insurance
• PTO
• 401(k) with Company Match

Sr Mechanical Superintendent (Data Center Construction)

Weeks Group is a leading data center Owner’s Representative & Project Manager consulting firm with decades of experience overcoming complex mission critical challenges globally. As a women-owned business, we excel in solving tough problems, ensuring safe, timely, on budget delivery. We solve the hardest problems in the data center construction industry.

Our Values

We Answer the Call

Integrity • Honesty • Trust • Nimbleness

We Don’t Take No for an Answer

Persistence • Determination • Accountability

We Solve Problems

Especially on complex, high-intensity projects

We Expect the Best from Each Other

Teamwork • Communication • Ownership

We BTFM

Innovative thinking with zero tolerance for mediocrity

Role Summary

The Sr Mechanical Superintendent leads field execution of mechanical scope on mission-critical data center projects. This role owns day-to-day onsite leadership for mechanical activities: safety, subcontractor coordination, installation quality, schedule adherence, testing readiness, and turnover support. The Mechanical Superintendent ensures systems are installed correctly, documented properly, and turned over in a manner that supports successful startup, commissioning, and operations.

This is a hands-on, high-accountability role for a leader who can drive production, coordinate seamlessly with electrical and CSA teams, and maintain clean build discipline in critical environments.

Key Responsibilities

Safety & Field Leadership (Primary)

• Lead mechanical field operations while reinforcing a zero-incident culture.
• Ensure subcontractors comply with site safety plans, permits, JSAs/AHAs, LOTO requirements, hot work controls, and housekeeping standards.
• Conduct regular safety walks; correct unsafe conditions immediately and escalate when necessary.

Mechanical Scope Execution (Primary)

Lead and coordinate installation for mechanical systems, including (project-dependent):

• Chilled water / condenser water piping and equipment
• CRAH/CRACs, AHUs, MAUs, exhaust systems
• Cooling towers / fluid coolers / pumps / heat exchangers
• Hydronic specialties, valves, strainers, expansion tanks, insulation
• Mechanical supports, housekeeping pads, curb systems, equipment rigging coordination
• Fire protection interface coordination (as required)
• BAS/BMS coordination for controls and integration readiness
• Equipment access, service clearances, and maintainability requirements

Planning, Sequencing & Schedule Control (Primary)

• Own mechanical short-interval planning (daily/weekly) and support pull planning with measurable commitments.
• Coordinate mechanical rough-in, overhead work, and equipment setting paths with CSA/architectural progress and electrical busway/gear installation.
• Identify constraints early (design gaps, material delays, access conflicts) and drive resolution to maintain schedule.
• Track manpower, productivity, and area readiness; communicate impacts and recovery plans.

Quality Control & Clean Build Discipline (Primary)

• Enforce mechanical installation standards, tolerances, and manufacturer requirements.
• Drive quality walks and manage deficiency/punch lists to closure.
• Protect critical spaces: dust control, cleanliness, protection of finishes/equipment, and strict housekeeping expectations.
• Ensure labeling, tagging, and documentation support turnover and commissioning.

Coordination & Communication (Primary)

• Lead/participate in key coordination meetings: foreman huddles, subcontractor coordination, BIM/VDC coordination, look-ahead planning, and progress walks.
• Coordinate with commissioning agents (CxA), controls vendors, and TAB contractors to ensure readiness and logical execution.
• Communicate field issues clearly with options, impacts, and recommended solutions.

Procurement & Long-Lead Tracking (Supporting)

• Track and support procurement status for mechanical long-lead items (CRAH/CRAC, pumps, towers, valves packages, specialty equipment).
• Coordinate delivery, laydown, rigging plans, and installation readiness with the project team and vendors.

Testing, Commissioning Readiness & Turnover (Primary/Supporting)

• Drive mechanical completion by system/area to support startup and commissioning.
• Coordinate TAB and flushing/cleaning requirements (hydronic cleanliness, chemical treatment as required).
• Ensure prefunctional checklists, test results, and installation sign-offs are complete and filed.
• Support turnover requirements: as-builts, O&Ms, training coordination, warranties, spare parts, and final punch closure.

Knowledge, Skills & Abilities

• Strong mechanical construction background with superintendent-level leadership experience.
• Mission-critical/data center experience strongly preferred; other high-spec industrial or healthcare experience considered.
• Deep understanding of mechanical means and methods, sequencing, and constructability.
• Ability to read drawings/specs and enforce quality with subcontractors.
• Working knowledge of BAS/BMS coordination and commissioning flow (prefunctional → functional → integrated testing).
• Strong communication and conflict resolution skills; calm under pressure.
• Comfortable with field technology (Procore/ACC, Bluebeam, MS Office) and daily reporting.
• Understanding of CPM schedule logic and short-interval planning.

Experience & Education (Typical)

• 7+ years in commercial/industrial mechanical construction, including lead superintendent/foreman responsibility.
• Data center / mission-critical experience preferred.
• OSHA 30 preferred (or willingness to obtain).

Compensation & Benefits

• Competitive base salary based on experience and project scope.
• Performance-based bonus potential.
• Fully paid comprehensive benefits (medical, dental, vision) for you and your family.
• 401(k) Safe Harbor plan.
• Paid time off (PTO).
• Opportunity to work on technically complex data center projects in a high-performance environment focused on long-term growth and leadership development.

Position Overview

We are seeking a highly experienced Commercial Roofing Operations Manager with extensive knowledge across spray foam, roof coating systems, and traditional commercial roofing systems including TPO, PVC, and Modified Bitumen.

This role requires someone with strong hands-on field experience who understands spray equipment and application techniques while also being capable of managing crews, overseeing project timelines, and ensuring quality execution across multiple projects.

Key Responsibilities

• Oversee execution of commercial roofing projects including SPF foam, coating systems, and single-ply / modified systems
• Maintain strong knowledge of TPO, PVC, Modified Bitumen, foam roofing, and restoration coating systems
• Operate and understand spray rigs, proportioners, and application equipment
• Hire, train, and manage roofing crews
• Coordinate with project managers and company leadership to ensure projects stay on schedule
• Order materials and manage project logistics
• Enforce quality control standards and proper installation procedures
• Ensure customer satisfaction and professional jobsite management
• Maintain adherence to production schedules and project timelines

Qualifications

• Extensive experience with commercial roofing systems (TPO, PVC, Modified Bitumen, SPF, and coating systems)
• Deep knowledge of foam roofing and roof restoration systems
• Hands-on experience with spray rigs and coating equipment
• Proven ability to lead field crews and manage production
• Experience with material ordering, scheduling, and operational oversight
• Strong understanding of commercial roofing installation standards and best practices
• Ability to manage multiple projects and crews simultaneously

Preferred

• Experience managing large commercial roofing operations
• Background in foam and coating divisions
• Strong leadership and communication skills

Lead Installation Technician – AVL Systems

Location: MN (Travel Required)

Employment Type: Full-Time

Our client is seeking a Lead Installation Technician to oversee the installation of professional audio, video, and theatrical lighting systems in performance venues, commercial facilities, and houses of worship. This role combines hands-on technical work with crew leadership, ensuring installations are completed safely, efficiently, and to industry standards.

Responsibilities

• Lead installation of AVL systems including audio, video, and theatrical lighting equipment
• Direct and coordinate small installation crews (2–5 technicians) onsite
• Install, troubleshoot, and maintain AVL systems using industry best practices
• Read and interpret CAD drawings and construction documents
• Coordinate with project managers, designers, electricians, and general contractors
• Document installation progress and maintain quality standards
• Provide basic client training and system handoff support
• Prepare tools, equipment, and installation materials for job sites
• Maintain organized shop and installation areas
• Support occasional live event or production work as needed

Qualifications

• 3–7 years of AVL installation experience
• Ability to read schematics and construction drawings
• Experience with cable fabrication, rack assembly, termination, and system installation
• General construction knowledge including mounting equipment and working within finished spaces
• Strong communication skills and ability to interact with clients onsite
• Working knowledge of theatrical rigging preferred
• CTS certification or Power Limited Technician license preferred
• Ability to lift up to 75 lbs., work at heights, and travel for projects

Benefits

• Health, dental, retirement, life, and disability insurance
• Company vehicle provided for work use
• Competitive hourly compensation based on experience

About Theater Outsource

is the entertainment industry’s dedicated recruiting partner — connecting top-tier talent with the companies that bring stages, venues, and experiences to life. From lighting and rigging to AV, scenic, and systems integration, we specialize exclusively in entertainment technology.

We work with manufacturers, integrators, and production companies nationwide — delivering permanent placements with no upfront cost and a 90-day guarantee.

We deliver the Talent.

About Us

Taikisha USA is a global leader in the engineering, design, and construction of industrial paint finishing systems for the automotive and related industries. Join our team of talented professionals where integrity, collaboration, and commitment to continuous improvement are the pathway to success.

Position Overview

A Site Manager oversees daily field operations to ensure work is completed safely, on schedule, within budget, and to the required quality standards. This role coordinates labor, subcontractors, materials, equipment, and site logistics while serving as the primary point of leadership for onsite execution. The Site Manager works closely with project management, clients, and craft supervision to resolve issues, maintain progress, and uphold compliance with company policies and site-specific requirements. Strong leadership, communication, planning, and problem-solving skills are essential for successfully driving project performance in a fast-paced construction environment.

Key Responsibilities

• Lead and supervise all onsite construction activities to ensure safe, efficient, and high-quality project execution.
• Coordinate subcontractors, materials, tools, and equipment to maintain schedule, workflow, and productivity goals.
• Monitor project progress, identify field issues, and implement timely solutions to minimize delays, disruptions, and cost impacts.
• Enforce safety standards, company policies, and site-specific requirements to maintain a safe and compliant work environment.
• Communicate regularly with project managers, clients, engineers, and field supervision regarding project status, risks, and upcoming needs.
• Oversee quality control and workmanship to ensure installations meet drawings, specifications, and customer expectations.
• Prepare and submit daily site reports documenting manpower, production tracking, safety concerns, field issues, equipment usage, and other key project activities to support accurate project oversight and decision-making.

Requirements

• 3 years of Industrial construction experience in an onsite managerial role Automotive / paint finishing preferred.
• OSHA 30 Hour Construction Certification
• Proficiency with Software including Excel, Bluebeam, Raken, Teams, Outlook
• Rigging and lift planning experience
• QA/QC experience
• Management of multiple trade sub-contractors
• 100% Onsite including domestic travel.

Preferred qualifications:

• Rigging Certifications
• Welding
• Construction Management Degree, Engineering Degree, or equivalent knowledge & experience

What Taikisha USA Offers

• Competitive compensation package
• Generous paid time off and platinum healthcare benefits
• 401(k)
• Opportunities for Professional growth and development in a collaborative environment

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.