Proper Voltage Jobs in Usa

PrideNow is seeking an experienced Maintenance Electrician to join our team in a full-time, direct hire role. This position requires a highly skilled professional capable of performing complex industrial electrical maintenance in a manufacturing environment. Candidates with journeyman-level experience or 7–10 years of industrial electrical experience are strongly encouraged to apply.

Shifts Available:

• 2nd Shift: Monday–Friday, 2:00 PM–10:00 PM
• Pay Rate: $34.25/hr. plus $1 shift differential for 2nd shift
• Comprehensive benefits package to include Medical, Vision, Dental, PTO, 401k + Match, FSA etc.

Job Responsibilities:

• Identify electrical hazards and safely isolate, ground, and prepare circuits and equipment for repair.
• Use required PPE to protect against arc flash and electrical shock.
• Read, interpret, and troubleshoot from blueprints and schematics, including 240V and 480V three-phase systems.
• Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high-voltage switchgear, protective relays, and related equipment.
• Install, calibrate, and maintain electrical apparatus using engineering drawings and manuals.
• Install conduit, pull wiring, and perform proper terminations.
• Use electrical and electronic testing equipment such as multimeters, ammeters, megohm meters, high-potential testers, oscilloscopes, and digital probes.
• Install and maintain electrical distribution and control equipment including switches, relays, circuit breakers, and panels.
• Install and maintain drive systems including VFDs, eddy current drives, and DC drive systems.
• Perform installation, maintenance, and troubleshooting of PLC systems, including point-to-point wiring and equipment replacement.
• Install and calibrate pressure, temperature, flow, and level control devices.
• Observe operating systems to detect hazards and determine need for adjustments or modifications.
• Design and lay out control panels, set up complex control systems, and modify engineering drawings when required.
• Repair or replace faulty electrical equipment, including electronic controls, motors, meters, outlets, and panels.
• Document work performed and communicate issues, irregularities, and ongoing needs to the team.
• Maintain a safe and clean work environment following all procedures and regulations.
• Communicate effectively to resolve electrical problems.
• Assist in training line mechanics and apprentices as needed.
• Use the computerized maintenance management system (CMMS) to enter and retrieve information.
• Follow safe work practices at all times and ensure work does not endanger others.
• Perform additional duties as needed.

Additional Requirement:

• Physical examination is required.
• Must be able to train on 1st shift for 1-2 weeks if needed
• Journeyman or electrical license preferred or 5+ years of experience as an electrician in a manufacturing plant

#SM

About American Meat Companies:

American Meat Companies was founded by Ron and Mariellen Day in a small meat locker in Anaheim, California. From our very modest beginnings in 1975, American Meat Companies has grown to become one of the largest meat purveyors in Southern California and has expanded to a brand new state-of-the-art facility in Dallas, Texas.We produce a full line of steaks, hamburger patties, pork chops, and poultry items, and we make them to your specifications.

We know meat. And it’s all we do. We are passionate about quality and we are extremely proud of the reputation we have earned over the past 46 years.

2nd Shift Industrial Maintenance Tech Job Summary:

Under the supervision of the Facilities & Maintenance Manager, you will be responsible for setting up, installing, repairing, and maintaining production/manufacturing equipment and machinery for a new start-up facility. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Diagnosis equipment malfunctions and makes repairs or adjustments as needed. Responsible for assuring all work performed meets Product Safety and Quality, Employee Safety, and Legality of Policies and Procedures.

Essential Duties and Responsibilities:

1. Follow specifications of blueprints, manuals, and schematic drawings; install, maintain and repair

equipment, machinery, physical structures, and plumbing/electrical systems.

2. Inspect, measure, and test equipment while in operation visually (using electrical and electronic equipment) and auditory (listening for unusual sounds from machines or equipment) to detect malfunction, wear, misalignment, or other problems. Inspect used parts to determine changes in dimensional requirements.

3. Discuss/diagnose machine problems with the Maintenance Supervisor, Production Supervisor, Production Superintendent, Plant Manager, or other maintenance workers. Inform appropriate management personnel of equipment and parts needs.

4. Dismantle defective machines and equipment and install new or repaired parts. Reassemble and test machines.

5. Clean and lubricate shaft, bearings, gears, and other parts of machinery.

6. Install and repair electrical apparatus, such as transformers, wiring, and electrical and electronic components of machinery and equipment.

7. Layout, assemble, install and maintain pipe systems and related hydraulic and pneumatic equipment. Repair and replace gauges, valves, pressure regulators, and related equipment.

8. Install, program, and repair automated machinery and equipment, such as robots or programmable controllers.

9. Set up and operate machine tools, such as lathe, grinder, drill, and milling machine, to repair or fabricate machine parts.

Other Duties and Responsibilities:

1. Repair and maintain the physical structure of the establishment and perform preventative maintenance functions.

2. Assist production personnel in change-over and set-up procedures.

3. Attend safety classes/seminars as periodically scheduled.

Decision Making & Problem Solving: Responsible for troubleshooting, diagnosing, and repairing production equipment, including but not limited to industrial blenders, industrial mixers, automated packaging equipment, robotic equipment, pumps, valves, and pressure vessels.

Good Manufacturing Practices: Interprets GMP and HACCP regulations into Company and product-specific practices.

Production Support: Accountable for the efficient installation, maintenance, and repair of Electrical Controls and Mechanical machinery. Equipment includes but is not limited to Hydraulics Combo Dumpers, Meat Blenders, Grinders, Freezers, Scales, Labelers, Case Sealer, Baggers, Seasoning equipment, etc.

Project Management: Engages in cross-functional activities and collaborates across boundaries to ensure successful project implementation. Gathers information to interpret needs, assess requirements, and take the initiative to identify sound solutions through the application of expertise and knowledge. Must have a very strong customer service orientation with a high sense of urgency.

Quality System Compliance: Ensures the requirements of the Quality System, the Quality System Regulation (USDA, FDA), and other relevant standards are fulfilled.

Safety: Enforces Company safety policies and procedures. Responsible for the safe operation and performance of Maintenance and Facility.

Technical Documentation/Communication/Processes: Knowledge of preventive maintenance procedures / Total Productive Maintenance. Prior experience in Computerized Maintenance Management Systems.

Training & Development: Complete training and documentation thereof, in line with Company policies and procedures.

Other Compliance: Works to ensure compliance with all applicable laws and regulations issued by OSHA, EPA, Labor & Employment Law, and other federal, state, and local regulations, including Lock-out/Tag-out, confined spaces, and personal protection regulations.

Job Requirements (Education, Work Experience, Certifications, Skills)

Education: High school or equivalent (Required), Technical Degree (Preferred), technical training, or equivalent years' experience acceptable in place of formal education. Must be computer literate with proficiency in using CMMS systems.

Work Experience: Minimum five (5) years of industrial maintenance experience in manufacturing (Food Preferred); strong in precision maintenance, electro-mechanical troubleshooting, and other industrial skills to include pneumatic and hydraulic system knowledge with; experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings), product manuals (e.g., reading and applying knowledge to make repairs), troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns), and reading mechanical drawings (e.g., hydraulics, pneumatics); Experience with electrical systems to include low voltage control circuits, motor circuit controls, VFD s, PLC troubleshooting knowledge (Rockwell PLC/HMI knowledge), and electrical safety systems required.

Certifications: OSHA 40 (Preferred)

Skills:

Ability to communicate effectively with a variety of individuals.

Ability to work in a fast-paced environment.

Ability to reason, negotiate, instruct, persuade, or speak with others.

Ability to pay close attention to detail.

Strong interpersonal skills and judgment in communicating with staff.

Receptive to management development suggestions and willing to seek additional knowledge to facilitate job growth.

Excellent written and oral communication skills.

Proven ability to juggle multiple tasks simultaneously.

Ability to interpret HR regulations, safety rules, operating and maintenance instructions, and procedures manuals.

Ability to solve complex problems.

Fully competent to a high degree in mechanical knowledge.

Ability to troubleshoot electrical controls.

Ability to follow verbal and written instructions, as well as interpret pencil sketches and diagrams.

Ability to read ladder logic and use it to troubleshoot systems.

Other Duties and Responsibilities:

May be required to work overtime, evenings, or weekends to complete work. May be required to work flexible shifts, including on-call.

Other duties and tasks as assigned.

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• 2nd Shift
• Holidays
• Possible Overtime
• Weekends as needed

Work Location: In person

Fiber Optic Test & Measurement Technician

Salary: 60,000 per year

Perm with excellent benefits.

Location: Newington, NH

Hours: Will be 4 12 hour rotating shifts -Night Shift 6:00pm – 6:30am

Will be responsible for performing detailed electro-optical and electrical testing on fiber optic cables and related systems throughout the production process. This role ensures products meet internal quality standards and contractual specifications by conducting testing, analyzing results, and documenting any non-conformances.

Key Responsibilities

• Perform characterization tests on fiber optic cables, including OTDR, Chromatic Dispersion, Polarization Mode Dispersion, and electrical tests such as High Voltage, Insulation Resistance (IR), and DC Resistance (DCR).
• Analyze test data to ensure compliance with product specifications and quality standards.
• Prepare cable ends and test setups using hand and power tools.
• Document results and generate reports for any failures or non-conforming products.
• Collaborate with manufacturing, quality, and management teams to address testing outcomes and production needs.
• Follow safety protocols, including proper use of PPE and adherence to company safety practices.
• Support continuous improvement initiatives and maintain accurate testing records.
• Respond to multiple production testing assignments as required.

Qualifications

• High school diploma or equivalent required.
• Associate degree in electrical/electronics technology or at least two years of related experience preferred.
• Strong attention to detail, analytical skills, and ability to work independently.
• Basic math skills including fractions, decimals, ratios, and conversions.
• Proficiency with Microsoft Office (Excel, Word, Outlook).
• Effective verbal and written communication skills.
• Flexibility to work different shifts, overtime, and weekends based on production needs.

Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector.

We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us.

Principal Duties & Responsibilities

Ensure all Supply Chain work is performed accurately and timely:

• Routine monitoring of actual volume by major product group
• Routine calculations of lead times, equipment efficiencies, and rolling volume projections by major product group
• Administration of an accurate finite schedule for all pacemakers
• Provide guidance to Supervisors and Managers on flow, inventory, rework, and any other actions as needed
• Maintain accurately dated production orders
• Disposition non-conforming product and follow up to ensure it is released, scrapped, cross-applied, reworked, and/or remade as instructed
• Monitor slow-moving, surplus, and obsolete inventory to ensure it is properly consumed, scrapped, re-worked, cross-applied, and/or reserved by Finance as needed
• True-up raw material inventories in system
• Plan raw material and subassembly needs and provide purchase orders to suppliers
• Follow up on open purchase orders as needed with suppliers
• Physical and systematic Receiving, Packaging, finished goods and customer-owned inventory management, and Shipping
• Safe work environment and behaviors at all levels
• Adherence to Collective Bargaining Agreement and Rules of Conduct
• Robust cross-training within team
• Present delivery and inventory topics as appropriate at daily tier meetings

Supervision Scope

Direct supervision of one (1) DC Manager, (2) Supply Chain Schedulers, and three (3) Supply Chain Planners

Knowledge/Skills/Abilities

• Strong leadership skills, including a drive to develop continuous improvement strategies and execute them to deliver results
• Strong analytical and problem-solving skills
• Demonstrates “lean” thinking by driving continuous improvements in areas directly and indirectly associated with Supply Chain
• High degree of computer skills such as Microsoft Office and SAP
• Excellent written and verbal communication skills for a broad audience ranging from executives to blue collar team members
• Self-managed work style, with attention to details and understanding of both manufacturing and business principles

Qualifications

• At least five years of experience in production scheduling, raw material planning, or freight planning is required
• Four-year degree in a business or technical field is preferred
• Use of a finite scheduling system is preferred
• Working knowledge of Lean and Six-Sigma tools is preferred

Work Environment/Physical Demands:

• Fast-paced and hectic work environment where speed, accuracy, and multi-tasking is required routinely
• Regular electronic interaction with internal and external business partners at all levels of the organization

Job Summary

Under the direction of the Lead Automotive Account Manager - West Coast, the SOCAL Automotive Sales Engineer is responsible for maintaining current customer relationships and identifying areas for potential growth with established and new customers in the electric vehicle market. The primary role will be serving as the key account manager for a major electric vehicle company with responsibility for several smaller accounts. The role is responsible for being the main point of contact for communication regarding product selections and opportunity generation. This position is based primarily in the SOCAL area, with travel to the West Coast region as required. This individual will work with a cross-functional team, including sales, project management, product management, and engineering, to achieve success. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.

Essential Functions:

• 
  
  
• Serve as the key account manager for SOCAL automotive vehicle customers.
  
  
• Coordinate and align domestically and globally for relevant opportunities as required.
  
  
• Expand HellermannTyton's position in low-voltage, high-voltage vehicle electrification systems as well as fluid routing opportunities.
  
  
• Uncover opportunities in standard, platform-based, and custom products
  
  
• Attend and lead selected customer-facing meetings to drive opportunities to specify HellermannTyton's products.
  
  
• Support overall business direction as set by automotive sales and marketing leadership with vetted information and strategic clarity to ensure key activities are moving forward.
  
  
• Work with customer engineering teams to assess standard plastic fasteners/clips for wiring harnesses and fluid routings, offer substitutions, and deliver new, improved offerings.
  
  
• Use understanding of technical drawings, documents, and automotive testing requirements to convert information into recommendations and next steps to achieve the specification.
  
  
• Understand and have full knowledge of OEM specifications for standard parts and leverage that to gain market share.
  
  
• Follow and improve process flows to enable efficient multi-stakeholder direction and understanding of key actions and commitments.
  
  
• Manage customers current and upcoming platforms and develop sales plans in line with customers goals
  
  
• Maintain familiarity with competitors' products and identify opportunities
  
  
• Effectively communicate status, actions, milestones, and activities to key stakeholders.
  
  

Other Functions:

• 
  
  
• Ability to discern opportunities and roadblocks to the goals of a project and drive results for increased sales.
  
  

Qualifications (skills, knowledge, experience)

• 
  
  
• BS from an accredited four-year college or university, engineering discipline preferred, or equivalent experience in lieu of degree
  
  
• Excellent knowledge of the Microsoft Office Suite.
  
  
• 5+ years of professional experience demonstrating mechanical and engineering aptitude, along with successful key customer responsibility
  
  
• Automotive Industry Experience required
  
  
• Knowledge of plastic fasteners is preferred
  
  
• Must have a valid driver's license, acceptable driving record, and adequate insurance
  
  
• Minimal travel involved
  
  

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The AV Installation and Support Services Technician is responsible for the installation, termination, testing, troubleshooting, and maintenance of low-voltage cabling systems, including voice, data, and video.

Assigned to Client and works full time from onsite location responsible for Installation and then maintaining the system after installation. Will conduct Preventive Maintenance and will assist with Service Tickets as needed. Will work with REMOTE support to troubleshoot Service Tickets as required.

This role ensures all work complies with industry standards and client requirements, with a focus on quality, safety, and efficiency. Technician will work onsite and will be responsible for preventive maintenance of the systems and will work with remote service technicians to address service tickets as needed.

What You'll Do:

• 
  
  
• Install, terminate, and test copper and fiber optic cabling for voice, data, and video systems.
  
  
• Interpret blueprints, floor plans, and wiring diagrams to determine cabling requirements and optimal routing.
  
  
• Perform troubleshooting and repairs on structured cabling systems and related hardware.
  
  
• Ensure all installations comply with relevant standards.
  
  
• Document all work performed, including test results and as-built drawings using BlueBeam.
  
  
• Collaborate with project managers, engineers, and other trades to ensure successful project completion.
  
  
• Maintain tools, equipment, and a safe, organized work environment.
  
  
• Provide technical support and guidance as needed.
  
  
• Participate in ongoing training to stay current with industry best practices and standards.
  
  
• Oversee all on-site activity on the active project job site and address any issues necessary to achieve quality and timeline standards
  
  
• Oversee all field operations and report progress, status and issues.
  
  
• Supervises the physical installation of a wide variety of technology into a wide variety of locations
  
  
• Maintains all quality control on jobsite, checking all work from subcontractors and union trades. Managing any discrepancies in our standards
  
  
• Able to read and understand functional design drawings and cable riser diagrams
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Manager
  
  
• Able to build and wire custom panels from engineering drawings
  
  
• Advanced Fiber optic cable handling, installation termination and testing
  
  
• Responsible for tracking and maintaining toolkits, job material boxes, company vehicles and materials inventories. Keep clean, orderly and well documented
  
  
• Responsible for tracking and maintaining their personal licenses, certifications and qualifications. (Some states have specific requirements in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry. Maintain an activity log and a personnel log for skills to report on recommended improvements.
  
  
• Conduct routine Preventative Maintenance and logs as required.
  
  
• Work with Remote support for service tickets that require escalation.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients' jobsites with no supervision. This position is responsible for the coordination with clients, contractors and subcontractors. This position will be the key and only field technician in many situations and will be responsible for delegating work, working with remote support, and communicating with key stakeholders on behalf of the company. Requires maintaining quality control on all field work. This position requires the highest level of technical and people skills along with great communication skills.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general, the service manager, project manager and supervisor are available to answer questions, but this position is very independent and will be looked upon to make many onsite decisions on behalf of the service manager and company. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

• 
  
  
• Work is performed in commercial, industrial, and construction environments.
  
  
• May require working in confined spaces, on ladders, lifts, or at heights.
  
  
• Must be able to lift and carry up to 50 lbs.
  
  
• Exposure to varying weather conditions and construction site hazards.
  
  

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis.

Employee will be responsible for their safety while on job sites and comply with all safety regulations in place by the client and Diversified. Use of PPE could be required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to be mobile around the client site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 50 pounds in construction areas.

The individual is regularly required to use keyboards, test equipment and controls required for installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee must possess a valid Passport for entry onto client site. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Occasional travel by airplane for out-of-town projects is required.

Safety:

Maintain and wear appropriate PPE as the job and tasks require it.

Ensure hazards are addressed and rectified in a timely manner.

What You'll Bring:

Education & Certifications:

• 
  
  
• High school diploma or equivalent required.
  
  

• 
  
  
• Must possess the E06 Limited Energy Systems License
  
  

• 
  
  
• OSHA 30 Certificate required
  
  
• Must have a valid US Passport.
  
  
• Must have a valid driver's license and adhere to our insurance requirements
  
  

Required Skills/Qualifications:

• 
  
  
• Minimum 2 years of experience in low-voltage or structured cabling installation.
  
  
• Possess advanced AV installation skills
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Proficient in the use of cable testers, hand tools, and power tools.
  
  
• Ability to read and interpret technical documents and blueprints.
  
  
• Must have knowledge of the following programs: Teams, Outlook, Excel, OneNote, BlueBeam/Adobe Reader
  
  
• Willingness to travel to job sites as required.
  
  
• Excellent troubleshooting and problem-solving skills.
  
  
• Strong communication and teamwork abilities.
  
  
• Good verbal communication skills and good customer service skills
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  
• Able to work indoors/outdoors, standing, sitting and ladder use. Able to lift 50lbs.
  
  

Preferred Skills/Qualifications:

• 
  
  
• Experience with Service Now preferred.
  
  
• Experience with Software House preferred.
  
  

• 
  
  
• AVIXA CTS Certification is preferred.
  
  

• 
  
  
• AVIXA CTS-I Certification is highly encouraged
  
  

• 
  
  
• Installer (Level 1 or 2), Technician, or equivalent structured cabling certification preferred.
  
  
• Additional certifications from recognized structured cabling governing bodies are a plus.
  
  

Other relevant certifications may be required or preferred based on the technology focus of the position

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Insight Global is currently hiring a Telecommunications BIM Project Manager for a large client headquartered in the Fredericksburg, VA area. This role will be direct hire with a flexible salary range based on experience and qualifications and will require about 75% onsite work in the Chesterfield area. This client is growing rapidly in the data center space and is looking for a Telecommunications BIM Project Manager who can own the digital planning, coordination, and constructability of telecom infrastructure projects—using BIM/VDC tools to make sure what’s designed can actually be built in the field.

Required Skills & Experience

• 5+ years BIM/VDC experience supporting construction projects (mission critical preferred)

• Strong hands‑on knowledge of Division 27/28 low‑voltage systems, including structured cabling infrastructure (fiber and copper, pathways, and trays), access control device layouts and cabling pathways, CCTV camera layouts and pathway coordination, and fire alarm coordination (devices, pathways, and sleeves) as defined by contract scope

• Proficiency with: Autodesk Revit, Navisworks Manage, ACC / BIM 360 (Docs + Model Coordination + Issues)

• Able to interpret architectural/MEP drawings, specifications, and low-voltage schedules

• Strong coordination, communication, and organization skill

Electrical Engineering Manager

Ground Systems - Autonomous flight

Salary: Flexible +equity

Location: San Francisco (generous relocation package available)

The Role - Electrical Engineering Manager

This technical leader will guide and grow these teams as well as be able to own parts of the design directly as the team scales. You and your teams will be responsible for architecting and developing custom Printed Circuit Board Assemblies (PCBAs), integrated sensing and RF solutions

Responsibilities - Electrical Engineering Manager

• Be the electrical engineering technical leader for ground systems design including low voltage electronics and PCBA development, power electronics and RF systems
• Build your teams by hiring and coaching world class engineers
• Design and validate to safety and certification standards
• Liaise with other technical leaders both within and outside of the Ground Systems Hardware
• Leverage your technical leadership experience in hardware design
• Establish best practices, standards, and design and release review processes

Experience and skillset - Electrical Engineering Manager

• 8+ years of demonstrated experience with electronics designs and system integration
• 2+ year leading a technical engineering team, and direct hiring management experience
• Working with products across various stages of development, from prototype - production
• Ability to operate in ambiguous and fast paced environments
• Experience in either Low voltage digital circuit design and/or power electronics design
• You’re hands-on with hardware; you know your way around tools

All successful Electrical Engineering Managers will be contacted within 2 days of application