Production Level Code Example Jobs Remote Jobs in Usa

• Determines most practical inspection method and technique; plans sequence of operation; selects precision measuring instruments and equipment to dimensionally inspect units. Performs surface table inspections using standard positioning, measuring and layout instruments and equipment. Uses shop mathematics, decimals and fractions in the performance of the work noted herein.
• Conducts first article, receiving inspection, in-process inspection and final inspection assignments; visually and dimensionally inspects a wide variety of airframes parts and aerospace assemblies/components.
• Witness's first piece part production and certifies acceptability; observes and performs in-process inspection during component build-up and sub-assembly stages; performs final assembly inspection and observes testing operations to assure quality, workmanship and strict compliance with Arrowhead, military space and commercial specifications and standards.
• Inspects incoming metallic and fiber materials, plastic and rubber compounds for correct formulation call- out, serialization, identification, cure date and shelf life; verifies vendor and material certifications; checks heat codes, batch and lot numbers to assure product tractability; certifies the proper mixing and blending of bonding agents and adhesives. Inspects reinforced plastic and rubber products for delaminating, blisters, porosity, bond, elasticity, gauge surface smoothness and similar defects or characteristics. Checks configuration and part dimensions with or without the aid of assembly check gauges, fixtures and tooling. Prepares shipping data package for non-metal (soft goods) components/assemblies in accordance with contractual requirements.
• Monitors oven and cure processes and records temperature readings and dwell time; performs or observes pressurization and leak test using plant air, nitrogen and helium.
• Prepare rework tags, inspection reports and documentation. Coordinates rejection with MRB, engineering and customer representatives for depositions and process refinement. Assembles end item documentation for the review and acceptance of finished products. Prepares and maintains history files, records and reports.
• This job description is not all inclusive of all duties. Other duties may be assigned.

• Requires High School degree or GED. Related AA or trade school degree preferred.
• Requires 2+ years of related Quality Assurance inspection experience. Experience must include interface with customer source representatives, government sources, internal departments and senior management.
• US Citizenship or permanent residency.

• ASQ Certified Quality Inspector preferred
• Experience working in AS9100 production environment preferred
• Must be able to read and analyze engineering drawings and blueprints to determine requirements.
• Must be proficient in the use of basic inspection tools, calipers, scales, height gauges, optical aids, micrometers and GD&T.
• Must have experience with production processes such as assembly, forming, tooling, welding (fusion & resistance), heat treat, cleaning
• Must have experience with production machinery and equipment such as press forming, tube bending and other fabrication.
• Must have knowledge of metallic materials such as stainless, nickel, titanium, aluminum.
• Must have experience with composites materials and production processes such as elastomers, resins, and composite reinforcement material.
• Must be familiar with AS9102 standards and software, and military specifications.
• Experience using Net-Inspect standards and software preferred.
• Must interface effective across organizational levels.
• Must have good organizational skills and maintain accurate, complete documentation.
• Must have excellent communication skills, both written and oral.
• Must be proficient with the use of the Internet, MS Word/Outlook.

• N/A

• Lift up to 50 lbs.
• Push and pull 50 lbs.
• Bend Occasionally
• Sit, Stand, and Walk Frequently

• Working knowledge of NetInspect, Inspection Expert, AS9100, AS9101, Boeing, Northrop, Lockheed Martin, UTAS, Honeywell, and DCMA specifications.
• ASQ Certified Quality Inspector (CQI) certification is expected to be achieved within 12 months from the first day of employment.

Quality Supervisor / Quality Lead / Lead Quality Engineer required to oversee the quality assurance activities at a leading Rotating Equipment manufacturer and solutions provider based in Houston.

Quality Supervisor / Quality Lead / Lead Quality Engineer will be responsible for managing and overseeing inspection and testing processes to ensure that all activities align with company standards, customer requirements, and relevant industry codes. This role will directly support the resolution of quality issues and work towards continuous improvement on the production floor.

Quality Supervisor / Quality Lead / Lead Quality Engineer will work closely with operations, engineering, and project management teams to meet quality objectives, drive improvements, and maintain ISO 9001 certification.

Quality Supervisor / Quality Lead / Lead Quality Engineer Package

Circa $110,000

PTO

401K

Quality Supervisor / Quality Lead / Lead Quality Engineer Responsibilities

• Lead and coordinate the activities of a quality team to ensure accuracy and consistency in all inspection and testing activities.
• Supervise the inspection of rotating equipment components (compressors, turbines, steam actuators) to ensure dimensional, metallurgical, and non-destructive testing compliance.
• Review and approve non-conformance reports, ensuring all documentation is accurate, dispositions are appropriate, and timely closure is achieved.
• Coach, mentor, and develop team members to elevate technical proficiency and prepare them for higher levels of responsibility.
• Support root cause analysis and corrective/preventive action processes to ensure quality improvements.
• Ensure that all inspection equipment is calibrated and that NDT inspector certifications are up to date.
• Collaborate with operations and engineering teams to resolve any quality issues affecting production.
• Assist in customer and third-party audits, ensuring inspection documentation is prepared and available.
• Track inspection performance, identify trends in defects, and report key metrics to management.
• Ensure compliance with the company’s QMS (ISO 9001) and relevant industry codes (API, ASME, AWS).

Quality Supervisor / Quality Lead / Lead Quality Engineer Requirements

• 5+ years of experience in quality assurance or inspection within a manufacturing or service environment.
• 2+ years of supervisory experience, with a strong ability to lead without direct authority.
• Expertise in rotating equipment, including the inspection, assembly, and repair of compressors, turbines, and related components.
• Proficiency with dimensional inspection tools, NDT methods (MT, PT, UT, RT preferred), and welding processes.
• Familiarity with machining practices and processes.
• Knowledge of welding inspection and applicable codes (ASME, AWS) is advantageous.

Relevant professional certifications in quality or health & safety preferred.

• Ability to adapt to changing operational schedules and priorities, working across multiple sites as needed.
• Authorized to work in the United States and able to pass pre-employment drug, alcohol tests, and background checks.

Quality Control Inspector

KeyStone Heights, FL

Compensation: $38–45/hr (1.5× over 40 hrs, 2× over 50 hrs)

4th Shift

5pm-5am Friday - Sunday

Why This Role Matters

This position is essential to ensuring that all welds, materials, and fabricated components meet strict codes and quality standards. By maintaining compliance, supporting production teams in real time, and reinforcing quality processes, you’ll help drive reliability, safety, and precision across high-tonnage fabrication operations.

Key Responsibilities

• Perform visual inspections, dimensional checks, layout verification, and welding parameter monitoring
• Maintain QC documentation, logs, and inspection records
• Support welder qualification testing and coordinate QC hold points
• Conduct bolt rotational capacity tests and assist with Total Station measurements
• Collaborate closely with welders, lead personnel, production teams, shipping, and external inspectors
• Communicate real-time quality decisions to keep production accurate and compliant

Ideal Candidate Profile

• Required: Current CWI or ASNT VT Level II certification
• Strong blueprint reading and knowledge of welding codes
• Proficient with measurement tools and visual inspection techniques
• Detail-oriented, safety-focused, and strong communicator
• Preferred: ASNT MT Level II, UT Level II, NACE/SSPC BCI Level I, or heavy fabrication shop experience

Submit resume to or apply online.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washington.

In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform all functions related to tool fabrication, rework, and repair as required.

• Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.

• Read work orders and blueprints to identify required tasks, tools, and equipment.

• Develop plans for the fabrication, maintenance, and repair of tools.

• Initiate and coordinate engineering change requests with internal support groups when necessary.

• Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.

• Access and utilize appropriate tool drawings, models, and specifications using available computing systems.

• Select and verify necessary equipment from the shop storage area, ensuring current tool certification.

• Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.

• Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.

• Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.

• Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.

• Maintain accurate records of orders and coordinate tooling information with other shifts and departments.

• Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.

• Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.

• Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.

• Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.

• Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.

• Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.

• Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.

• 5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.

• 2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).

Preferred Qualifications:

• 5+ years of experience as a Tool & Die Maker.

• 2+ years of experience with hydraulics and pneumatics.

• Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.

• Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.

• Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.

• Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.

• Ability to reverse engineer and manufacture mold components within time limitations

• Ability to read and write G and M code with CAM programming experience.

Conflict of Interest:

Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We are currently seeking a Sr. Manager, Engineering to join our Minneapolis Milk Plant in Minneapolis, MN. In this newly created role, you will oversee and manage all aspects of the engineering and maintenance functions optimizing productivity and maintaining the facility’s infrastructure and equipment. As a people leader, you will direct a team of maintenance supervisors and technicians and work closely with plant management to accomplish goals while demonstrating Kemps’ Culture of Excellence principles.

Kemps is a farmer-owned brand of Dairy Farmers of America (DFA), a dairy marketing cooperative owned by more than 12,500 family farmers. Our mark matters and it represents the wholesomeness of dairy that we share with our communities and loved ones. DFA manufactures a variety of dairy products, including cheese, butter, fluid milk, ice cream, dairy ingredients, and more, under well-known and established regional brands. Our fingerprints touch thousands of brands across the marketplace, and we’re passionate about delivering the simple pleasures of dairy to people everywhere, straight from our family farm owners.

Responsibilities include, but are not limited to:

• Ensure mechanical and electrical expertise is available to production and other departments to maintain production systems, utilities, buildings, and grounds in a 24-hour 7-day per week operation.
• Ensure the site has an effective predictive/preventative maintenance program which has a maintenance strategy for all assets to remove unscheduled down time, increase the lifespan of assets by keeping them in optimal condition, and contain maintenance strategies so assets are timely maintained to minimize costs of asset breakdowns.
• Utilize a computerized maintenance management system to optimize asset utilization through scheduled preventative maintenance.
• Collaborate with plant management and corporate staff to utilize equipment to improve employee safety, production quality, equipment reliability, and overall equipment effectiveness by utilizing Continuous Improvement techniques and a Management Operating Structure (MOS).
• Collaborate with senior management to identify and prioritize capital improvement projects. Recommend expense or capital projects which are necessary or will improve productivity, safety, or operational efficiency.
• Remain current with the latest and emerging industry regulations and codes relative to mechanical and electrical systems design and operation.
• Prepare and manage the department’s budget, ensuring cost-effective allocation of resources.
• Perform replacement analysis of equipment considering space costs, depreciation, service life, and maintenance costs; advise production management of information and recommend appropriate actions.
• Source and evaluate vendors, contractors, and suppliers to obtain quality products and services at competitive prices. Negotiate contracts and agreements with external parties as necessary.
• Promote a safe and environmentally sound workplace that complies with all applicable federal, state, and local regulations.
• Provide management of employees directly or through supervisors to ensure effective selection, retention, development, disciplinary action, and performance management. If a collective bargaining agreement exists, may participate in negotiations, grievances, or other contract-related activities and discussions.
• Follow all DFA good manufacturing practices (GMP) and work in a manner consistent with all corporate regulatory, food safety, quality, and sanitation requirements.

Requirements:

• A bachelor’s degree in an engineering discipline is strongly preferred.
• 8+ years’ experience in engineering or maintenance functions in a food manufacturing environment.
• Minimum 2 years of supervisory experience of maintenance personnel is required.
• Experience managing budgets and capital projects.
• Ability to develop, scope, schedule, budget, and lead plant capex projects utilizing CAD and/or other tools.
• Experience with electrical motor control circuitry up to 480V 3 phase is preferred.
• Experience with PLC troubleshooting; Allen Bradley experience preferred.
• Ammonia/Refrigeration level 2 certification required (or willing to obtain certification).
• Boiler 1B or greater MN license required (or willing to obtain certification).
• Technical knowledge of wastewater treatment processes, regulatory compliance, and environmental best practices required.
• Union (for union facilities), Safety, and Worker's Compensation experience preferred.
• Proficient in Microsoft Office Suite and Auto CAD (preferred).
• Experience leading and following Safety/Security Policies and Procedures.

Benefits:

• Health and Welfare benefits begin 1st of the month after start date
• 401(k) with company contribution
• Competitive pay
• Paid vacation and holidays
• Career growth opportunities – we promote from within!
• Comprehensive healthcare benefits
• Service recognition and employee rewards
• Employee referral program
• Tuition reimbursement
• Work for dairy farm families

Company Background

Hayward Tyler, Inc. is a fabrication and engineered solutions company primarily engaged in serving the commercial nuclear power market. We design and manufacture OEM replacement parts, pressure vessels, heat exchangers, strainers, pumps, valves, structural supports and many other products. Offering both build to print and engineered to order integrated solutions, we have the highest level of certifications in the field including ASME code N, NPT, NS, NA, U, and NBIC R and NR.

Role Summary

Reporting to the Quality Assurance Director, the Quality Assurance Supervisor has day-to-day responsibility over the Hayward Tyler, Inc.’s [Nuclear] Quality Program that includes execution of our processes and procedures that define the way we meet the requirements of the Nuclear Regulatory Commission (NRC), ASME B&PV Code, and US Law to ensure our products and services meet the most stringent quality expectations of our customers. This important role is also responsible for the oversight of the output and training of the Quality Control Inspection team. The Quality Assurance Supervisor can also be part of increasing efficiency of HTI through continuous improvement.

Functional Goals

• Facilitation of the HTI Quality Program.

• Successful completion of audits from regulators, certifying organizations, and customers.

• Participates in vendor audits/surveys as required.

• Witnessing vendor activities as required.

• Qualification of Quality Control inspectors.

• Qualification of Quality Assurance personnel.

• Functions as an Authorized Nuclear Inspector interface with the company.

• Along with the Quality Assurance Director, the supervisor reviews the applicable ASME B&PV Code Sections and can make suggestions for changes to the QA Manual for future implementation and improvements as necessary.

• Reports on a regular basis to the Quality Assurance Director on the status and adequacy of the QA program.

• Strives for department deliverables to be right first time.

• A champion for building Quality into all aspects of the business.

• Provides back-up to Quality Assurance Director on all key functions.

Principal Duties

Site Leadership

The Quality Assurance Supervisor serves as the primary Quality contact at the Vermont site, working closely with cross-functional teams, while reporting to the Quality Assurance Director at Hayward Tyler, Inc. in Vermont. This position oversees all QA activity at the Vermont facility, and ensures compliance with company quality standards, regulatory requirements, and customer expectations. Keep management informed of the status of QA issues impacting production, personnel, and product deployment.

Quality Activities

This position leads the Quality department at Hayward Tyler and is responsible for all Quality activities. Quality functions break down into three main areas:

• Quality Assurance

Works with the QA Director to develop and maintain the Quality Program, including the Quality Manual, Policies, Procedures, and Processes to adhere to the requirements of the Nuclear Regulatory Commission, ASME Boiler and Pressure Vessel Code, and US Law. Ensures that quality requirements for contracts are properly converted to internal actionable items, and that the ASL and vendor qualifications are audited to meet our stringent requirements. Responsible for maintaining the qualification and certification of inspectors, internal/external auditors, nondestructive examiners and welders.

• Quality Control

Responsible for the review, the control, and to assure the product and the processes for quality are followed in accordance with our program. This includes contract and supplier purchase order review, material control, calibration, product inspection, destructive and non-destructive testing, and ASME B&PV Code activities.

• Quality Improvement

Responsible for working with the QAD to drive down the cost of quality from both internally and externally manufactured products and services. Major focus is internally generated errors and warranty costs. Responsible for driving a “right the first time” culture.

The Quality Assurance Supervisor also participates in the efforts to recruit, train, review, and mentor the Quality staff. They also may represent Hayward Tyler and its commitment to Nuclear Quality on ASME Committees, NIAC and other nuclear industry organizations and events.

Minimum Qualifications:

• AS in Engineering or equivalent job experience (2 plus years in technical position)

• Work experience in a Quality Assurance role in the commercial nuclear industry preferred.

• Commercial Nuclear audit experience required with Lead Auditor qualification preferred.

• ASQ Certified Quality Engineer, or Auditor is a plus.

• Fundamental understanding of the audit process including types of audits, planning, preparation, execution, reporting results and follow-up.

• Capability to learn and develop NDE experience from the organization.

• ASME B&PV Code experience in Section III and/or Section VIII preferred.

• Developed understanding of problem-solving and quality improvement tools and techniques. This includes knowledge of planning tools, quality tools, preventive and corrective actions, and how to overcome barriers to quality improvements.

• Fundamental understanding of quality philosophies, principles, systems, methods, tools, standards, organizational and team dynamics, customer expectations and satisfaction, supplier relations and performance, leadership, training, interpersonal relationships, improvement systems and professional ethics.

• Fundamental understanding of a quality system and its development, documentation and implementation to domestic and international standards or requirements.

• Ensures that work/escalated issues are addressed and completed in a timely manner and that delays and revised time frames are communicated.

• Ability to read & interpret ASME Code, engineering drawings, standards and specifications.

• Expected travel is up to 15% yearly.

• Proficient in Word, Excel, PowerPoint, Outlook and the Internet.

• Strong leadership, interpersonal, analytical and problem-solving skills.

• Highly ethical, collaborative, detail oriented, organized and highly motivated.

• Other duties as required.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician - Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State.

As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications.
• Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems.
• Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions.
• Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages.
• Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy.
• Comply with all Federal, State, and Company regulations while performing duties.
• Collaborate with other crafts to assist in troubleshooting outside the central control system as needed.
• Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency.
• Communicate relevant information to succeeding shifts using management-approved methods.
• Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems.
• Maintain equipment records, logs, and updates, preparing reports and schedules as required.
• Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion.
• Ensure system configurations comply with FAA and accreditation requirements.
• Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal).
• Understand electronic theory, computer and networking architecture, microprocessors, and discrete components.
• Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems.
• Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design.
• Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes.
• Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required.
• Perform tasks associated with other job classifications when necessary to complete assignments.
• Obtain and maintain applicable licenses, certificates, and certifications.
• Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems.
• Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance.
• 1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms.
• Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training.

Preferred Qualifications:

• Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment.
• Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
• Experience working around 3 phase, industrial voltages 480v, 277v, 208v.
• Ability to work around electromagnetic fields as a result of various types of production equipment.

Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 30, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Summary
Under the direction of the Lead Manufacturing Supervisor, the Processing Technician 2 is responsible for supporting the injection molding departments' operational goals. The primary responsibilities of this role will include Start-up of all down machines when ready, attending and actively participating in tech meetings, housekeeping, checking process parameters while ensuring all alarms are on and active, submitting first pieces to the Quality Lab, completing material changes, and setting scales. The Processing Technician 2 will provide troubleshooting support to the production group to correct problems. This role will act as the liaison between Production and the Process Engineering dept. This will be achieved by maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Troubleshooting, diagnosing and making recommendations for processing issues.
  
  
• Starting up presses after; changes (mold changes, conversions, material changes, etc.), rehangs, repairs, mold cleans, or other reasons
  
  
• Regrind and scrap management
  
  
• Assistance with Automation alarms and troubleshooting
  
  
• Enter all downtime and scrap codes accurately for future analysis using the Process Monitoring System (Mattec) as needed.
  
  
• Work with the Industrial Engineering team to ensure proper documentation is created and distributed regarding process sheets and deviations.
  
  
• Respond to inquiries and communicate with other company personnel using the company provided radio as well as follow radio etiquette and policy on a daily basis.
  
  
• Housekeeping (including purge, scrap parts, etc.) and proper storage of equipment, supplies etc.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting: Corporate policies, procedures, work instructions, and required documentation.
  
  

Other Functions

• 
  
  
• Other duties may be assigned.
  
  
• Evaluate current state processing conditions and recommend improvement plans as needed.
  
  
• Developing procedures for production related duties that may be used as reference/training materials.
  
  
• Work on audit preparedness for both internal and external audits.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting all corporate policies, procedures and work instructions.
  
  

Success in this role will require

• 
  
  
• Must have strong troubleshooting skills
  
  
• Ability to communicate with all levels of the organization.
  
  
• Must be detail orientated.
  
  
• Proven ability to work independently or within a team.
  
  
• Strong computer skills.
  
  
• Extensive knowledge of scientific injection molding principles and techniques.
  
  
• Extensive knowledge of DOE principles and techniques.
  
  
• Proven ability to prioritize and multi task.
  
  

What You'll Bring

• 
  
  
• High school diploma or equivalency, required.
  
  
• 3+ years experience as a Process Technician preferred.
  
  
• Must have demonstrated time management skills.
  
  
• Strong communication and interpersonal skills.
  
  
• Excellent mechanical skills required.
  
  
• Must be able to lift push, and pull up to 75 lbs. and be able to stand/walk for 12 hours.
  
  
• Must be able to stand. Walk, and work for up to 12-hour shifts.
  
  
• Excellent troubleshooting skills required.
  
  
• Knowledge of SPC principles.
  
  
• Advanced education in the area of injection molding such as WCTC Apprenticeship program, Paulson Training, RJG training, etc. preferred
  
  

Rev. 6.17.2025

#LI-Onsite

#LI-KN1

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Summary
Under the direction of the Lead Manufacturing Supervisor, the Processing Technician 2 is responsible for supporting the injection molding departments' operational goals. The primary responsibilities of this role will include Start-up of all down machines when ready, attending and actively participating in tech meetings, housekeeping, checking process parameters while ensuring all alarms are on and active, submitting first pieces to the Quality Lab, completing material changes, and setting scales. The Processing Technician 2 will provide troubleshooting support to the production group to correct problems. This role will act as the liaison between Production and the Process Engineering dept. This will be achieved by maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Troubleshooting, diagnosing and making recommendations for processing issues.
  
  
• Starting up presses after; changes (mold changes, conversions, material changes, etc.), rehangs, repairs, mold cleans, or other reasons
  
  
• Regrind and scrap management
  
  
• Assistance with Automation alarms and troubleshooting
  
  
• Enter all downtime and scrap codes accurately for future analysis using the Process Monitoring System (Mattec) as needed.
  
  
• Work with the Industrial Engineering team to ensure proper documentation is created and distributed regarding process sheets and deviations.
  
  
• Respond to inquiries and communicate with other company personnel using the company provided radio as well as follow radio etiquette and policy on a daily basis.
  
  
• Housekeeping (including purge, scrap parts, etc.) and proper storage of equipment, supplies etc.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting: Corporate policies, procedures, work instructions, and required documentation.
  
  

Other Functions

• 
  
  
• Other duties may be assigned.
  
  
• Evaluate current state processing conditions and recommend improvement plans as needed.
  
  
• Developing procedures for production related duties that may be used as reference/training materials.
  
  
• Work on audit preparedness for both internal and external audits.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting all corporate policies, procedures and work instructions.
  
  

Success in this role will require

• 
  
  
• Must have strong troubleshooting skills
  
  
• Ability to communicate with all levels of the organization.
  
  
• Must be detail orientated.
  
  
• Proven ability to work independently or within a team.
  
  
• Strong computer skills.
  
  
• Extensive knowledge of scientific injection molding principles and techniques.
  
  
• Extensive knowledge of DOE principles and techniques.
  
  
• Proven ability to prioritize and multi task.
  
  

What You'll Bring

• 
  
  
• High school diploma or equivalency, required.
  
  
• 3+ years experience as a Process Technician preferred.
  
  
• Must have demonstrated time management skills.
  
  
• Strong communication and interpersonal skills.
  
  
• Excellent mechanical skills required.
  
  
• Must be able to lift push, and pull up to 75 lbs. and be able to stand/walk for 12 hours.
  
  
• Must be able to stand. Walk, and work for up to 12-hour shifts.
  
  
• Excellent troubleshooting skills required.
  
  
• Knowledge of SPC principles.
  
  
• Advanced education in the area of injection molding such as WCTC Apprenticeship program, Paulson Training, RJG training, etc. preferred
  
  

Rev. 6.17.2025

#LI-KN1 #LI-Onsite

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.