Production Code Example Jobs Remote Jobs in Usa

• 
  
• Follows production drawings, sample assemblies and verbal instructions with close supervision. Understands and applies established acceptable workmanship practices to all facets of mechanical assembly.
  
• Interprets and works from schematics, drawings, work instructions and bills of material to understand the required parts and steps needed to complete the assigned assembly.
  
• Makes accurate mathematical calculations and uses precision measuring instruments as required.
  
• Uses a wide variety of hand and power tools to perform skilled fitting and assembly work. Inspect parts and performs basic tests.
  
• Tends machines, such as arbor presses or riveting machine, to perform force fitting or fastening operations on assembly line.
  
• Works at different work stations as production needs require. Works on line where tasks vary as different model of same article moves along line.
  
• Performs intermediate testing, assembly and or disassembly of mechanical assemblies using both traditional and non-traditional tooling such as multimeter, oscilloscope, spectrum analyzer, power supply, function generator, LCD meter, screwdriver, torque wrench, standard wrench, etc.
  
• Mounts complex assembled components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel, requiring manual dexterity and the ability to work with hand tools, power tools, soldering equipment, volt meters and other related test instrumentation. Knowledge of cleaning, lead preparation, component mounting, parts orientation.
  
• Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device.
  
• Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place.
  
• May perform other general assembly tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color coding parts and assemblies.
  
• Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics.
  
• May perform hand soldering using a soldering iron.
  
• May perform work (soldering and general inspection) under microscope.
  
• Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards.
  
• Troubleshoots and replaces defects of finished products.
  
• Reworks and repairs defective units rejected by inspection or test personnel.
  
• Follows safety procedures in the use and handling of flammable and hazardous chemicals required to meet all cleanliness specifications.
  
• Must be able to follow specific procedures and detailed instructions completely.
  
• Ensures that quality checks are completed throughout the manufacturing process.
  
• Records information on production records, logs and other report forms.
  

• 
  
• Oral/Written Communication - Listens and gets clarification; Responds well to questions; Records data; Writes clearly and informatively; Able to read and interpret written information.
  
• Teamwork - Gives and welcomes feedback; Contributes to building a positive team spirit; Supports everyone's efforts to succeed.
  
• Ethics - Treats people with respect; Works with integrity and ethically.
  
• Organizational Support - Follows policies and procedures; Supports organization's goals and values.
  
• Planning/Organizing - Uses time efficiently.
  
• Professionalism - Approaches other in a tactful manner; Accepts responsibility for own actions; Follows through on commitments.
  
• Quality - Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality.
  
• Quantity - Meets productivity standards; Completes work in a timely manner; Strives to increase productivity.
  
• Safety and Security - Observes safety and security procedures including using Personal Protective Equipment (PPE) as required and wearing company issued badge when on company property; Reports potentially unsafe conditions; Uses equipment and material properly.
  
• Adaptability - Adapts to changes in the work environment.
  
• Dependability - Follows instructions, responds to management direction.
  
• Attendance/Punctuality - Is consistently at work and on time.
  
• Initiative - Asks for and offers help when needed.
  

• 
  
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
  
• Ability to write routine reports and correspondence.
  
• Ability to speak effectively before groups of customers or employees of organization.
  

• 
  
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  
• Ability to apply concepts of basic algebra and geometry.
  

• 
  
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
  
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
  

• Follows all import/export requirements, consulting with facility import/export personnel as required.

• 
  
• Basic Knowledge of ISO and/or AS9100
  
• Working knowledge of Lean Manufacturing/6 Sigma/Kaizen
  
• Knowledge of specific software (design, analysis, ERP...)
  

• 
  
• US Citizenship with ability to attain/maintain government security clearance.
  
• Ability to travel (domestically/internationally) approximately _+/-10__%.
  

We begin with dreams. Dreams drive our motivation. Dreams are our future. The world's dreams, people's dreams, our dreams. Our passion creates ideas that make dreams come alive. Technology and products that were only dreams become reality.

All for dreams. Dreams challenge and the Nidec-Group will continue to meet the challenge. For the world's and people's tomorrows; the world's first, the world's best technologies and products; we will continue our part in creating a better society.

Nidec is the world's No.1 comprehensive motor manufacturer handling \"everything that spins and moves\", miniature to gigantic. Nidec is a global enterprise comprised of over 300 subsidiaries/affiliates. We are a leading manufacturer of commercial motors, industrial motors, appliance motors, and controls. Our product line features a full line of high efficiency motors for industrial applications in water treatment, mining, oil and gas, and power generation, and for commercial applications such as pool and spa, condensers, cooling towers and large refrigeration units. From keeping us comfortable in our homes to pumping clean water to making our cars more safe, electric motors are an indispensable part of our daily lives. At Nidec, our employees are on the forefront of developing new motor technologies. As we move deeper into the age of robotics, the impact of motors will only increase. With over 140,000 employees stationed worldwide, Nidec continues to be a unique organization, and each location maintains its individual personality. Whether driving locomotives, powering offshore platforms or keeping the lights on after a storm, Nidec electric power generation products impact the world on a daily basis. With over 1,000 employees in the Americas, we are moving forward with technology to solve our customers' electrical power needs for both prime and backup generation needs as the industry's leading manufacturer.

Shift: 2nd Shift

Days of Work: Monday - Thursday

Work Hours: 4:00pm - 2:00am

Work Location: On-site (Mankato, MN)

Starting Salary: $33.08 to $46.31 / Hour

Pay Frequency: Bi-Weekly

At Nidec, we prioritize our team's well-being and success. Our comprehensive benefits package is designed to support you both personally and professionally. These are the great benefits we offer, with additional perks and programs available to enhance your overall experience with us.

• Competitive Compensation: Attractive salary with additional bonus opportunities.
• Health and Wellness: Comprehensive medical, dental, and vision coverage, effective from your first day.
• Retirement Savings: 401(k) plan with a best-in-class company match of 100% on the employee's first 6% with an additional 3% employer contribution to support your financial future.
• Work-Life Balance: Generous time off package, including PTO and holidays.
• Education Assistance: Tuition reimbursement and continuous learning opportunities to support your professional growth.

Position Objective: Responsible for engineering documentation including blueprint reading and GD&T tolerances. Develop, optimize and maintain machine processes in a fast-paced production shop. Responsibilities include CAD design, CNC programming, creation of tool list, setup and part finishing documents. CNC equipment includes but is not limited to CNC turning centers with live tooling, CNC mills/lathes, lasers, CNC turret punches, and other computer operated equipment.

Essential Duties/Responsibilities:

• Work from customer's drawings and solid models to create, optimize and maintain CNC programs primarily for processing turned parts
• Must have a working knowledge of GD&T, fundamentals of geometry and trigonometry. Ability to transition between SI and metric units. Proper use of various measuring tools including Vernier calipers, micrometers, tread gages, etc.
• Create manufacturing processes and programming in a timely manner to support production schedules and customer delivery dates.
• Working knowledge of G code, M code, tool selection, steel grade metallurgy, tool geometry and coatings
• Assist on tooling design and development strategy within the programming team.
• Initiate and participate in projects to implement cost reduction strategies related to CNC programming optimization, tool life management, and/or quality improvement.
• Initiate Engineering Change Requests as required to ensure issues with CNC programs and related documentation are properly addressed and documented.
• Assist in the quoting process by providing setup and run time estimates for turned parts as well as material requirements, process steps and tooling requirements.
• Ensure changeover documentation for all CNC processes are current, accurate and standardized throughout the company.
• Ensure production and shipping schedules are met.
• Perform all other tasks or responsibilities as delegated by the Plant Manager/Site Leader.

Experience/Skills:

• Previous experience working with CNC equipment in a manufacturing environment
• Minimum 4 years programming Horizontal lathes and Vertical Turning Lathes required
• Minimum 1 years working CAD software (AutoCAD) Required
• Minimum 4 years working with Master Cam preferred
• Knowledge of Unigraphs software is a plus

Education:

• Associate Degree or Technical Degree Required

Equal Employment Opportunity and Affirmative Action at Nidec

Nidec is an Equal Employment Opportunity (EEO) and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants receive consideration for employment without regard to their age, gender, gender identity, sexual orientation, race, color, genetic information, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by law. For more information regarding your (EEO) rights as an applicant, please visit the following website: Shift Schedule

First Shift (United States of America)

No Soliciting

Nidec will not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to Nidec job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Nidec Talent Acquisition team is required before any external candidate can be submitted and such candidate must be submitted to the Nidec Talent Acquisition team.

• Program, set up, and operate Haas and Okuma CNC milling machines using Mastercam
• Read, interpret, and work from engineering drawings, blueprints, CAD models, and GD&T
• Machine custom fixtures, tooling, and production components to specified tolerances
• Collaborate with the Wire EDM process; utilize Makino Wire EDM support for fixture and tooling components as needed
• Coordinate the activities of technician in the pod by assigning tasks and ensuring adherence to production schedules.
• Inspect machinery for signs of wear, damage, or malfunction, and work with floor supervisor to generate appropriate corrective actions to address any issues identified.
• Provide guidance, training, and mentorship to pod technicians, fostering a culture of teamwork, accountability, and continuous learning.
• Have a strong understanding of G-Code and CAM to generate and modify when needed.
• Oversee the setup and operation of Mills and Vertical Saws to produce precision components according to engineering specifications.
• Monitor production processes to ensure efficiency, quality, and compliance with safety standards and regulations.
• Collaborate with management to prioritize work orders, allocate resources, and optimize production workflows.
• Conduct regular inspections of machining equipment, identifying maintenance needs, and coordinating repairs and upgrades as necessary.
• Support Management with develop and implement standard operating procedures (SOPs), work instructions, and quality control measures to improve process consistency and reduce waste.
• Communicate effectively with management, colleagues, and external stakeholders to provide updates on production status, resource requirements, and project timelines.
• Foster a culture of safety, quality, and continuous improvement, promoting adherence to company policies, procedures, and best practices.

• High School Graduate
• Minimum of 10+ years of CNC milling experience in a job shop environment
• Strong proficiency in Mastercam programming (2D and 3D)
• Extensive experience setting up and operating Haas and/or Okuma CNC mills preferred
• Proven ability to read and interpret complex engineering drawings and GD&T
• Experience machining fixtures, tight-tolerance parts, and varying part specifications
• Strong attention to detail, quality, and process control
• Ability to work independently and manage multiple jobs concurrently

• Experience working in a high-mix, low-to-medium volume job shop
• Familiarity with Wire EDM processes, specifically Makino Wire EDM, for fixture and tooling support

• Problem-solving skills
• Good verbal and written communication skills; strong organizational skills
• Working knowledge of Good Laboratory Practices (GLP), maintain Lab ISO and process Safety procedures.

We are looking for 3rd shift availability. Shift hours are Friday through Sunday 5am to 5pm.

• Must have CWI Certification
• NACE or BCI Certification is desired

• Ability to be conscious of Specifications and Company standards
• Ability to be organized and precise in maintaining a diary and reports
• Must have good people skills in dealing with difficult situations
• Ambitious person to help meet department and company goals and schedule.

HOURS - Friday - Sunday 5am - 5pm

Compensation details: 26-35 Hourly Wage

PI500d703f2f26-26289-39854633

AMAZING opportunity to work for a growing company WITHOUT giving up nights, weekends, holidays, etc. This role is also BONUS ELIGIBLE.

RELOCATION ASSISTANCE POSSIBLE

Skills

• Responsible for all quality control on production floor (proper pulling/measuring ingredients, correctly making/mixing cookie dough, proper packaging, lot codes, weight checks) etc.
• Create a clean, safe and organized factory environment
• SQF records: cold storage, scale calibration, production, packaging, x-ray, pre-operation and operation records. Approve daily records, handles all receiving, shipping, weekly, monthly and quarterly records (with CEO).
• Pull COA's directly with manufacturers and distributors, and managing frequency of allergen and microbiological testing
• Food safety: allergen testing, lot code signage, ingredient inspection
• Leads mock recall, at least 2x/year
• Continuous Improvement mindset: Assist in growth/optimization of production

EXPECTATIONS

• SQF certified for Bakery
• HAACP certified
• Familiar with recall process and ability to run a mock recall
• Ability to speak communicative Spanish including work-related terminology.

Quality Control Inspector

KeyStone Heights, FL

Compensation: $38–45/hr (1.5× over 40 hrs, 2× over 50 hrs)

4th Shift

5pm-5am Friday - Sunday

Why This Role Matters

This position is essential to ensuring that all welds, materials, and fabricated components meet strict codes and quality standards. By maintaining compliance, supporting production teams in real time, and reinforcing quality processes, you’ll help drive reliability, safety, and precision across high-tonnage fabrication operations.

Key Responsibilities

• Perform visual inspections, dimensional checks, layout verification, and welding parameter monitoring
• Maintain QC documentation, logs, and inspection records
• Support welder qualification testing and coordinate QC hold points
• Conduct bolt rotational capacity tests and assist with Total Station measurements
• Collaborate closely with welders, lead personnel, production teams, shipping, and external inspectors
• Communicate real-time quality decisions to keep production accurate and compliant

Ideal Candidate Profile

• Required: Current CWI or ASNT VT Level II certification
• Strong blueprint reading and knowledge of welding codes
• Proficient with measurement tools and visual inspection techniques
• Detail-oriented, safety-focused, and strong communicator
• Preferred: ASNT MT Level II, UT Level II, NACE/SSPC BCI Level I, or heavy fabrication shop experience

Submit resume to or apply online.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA.

Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.

Position Responsibilities:

• Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
• Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
• Lay-out, plan and sequence machining operation
• Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
• Use shop math, geometry and/or trig to calculate dimensions
• Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
• Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
• Select machine to be used in machining process
• Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
• Write programs as required for multi axis machines
• Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
• Perform minor editing of CNC programs per shop requirements
• Select and check cutting tools per program or CNC documents
• Ensure cutters are the correct type, length, diameter, radius, and are in good condition
• Select machine accessories and holding devises (e.g., chucks, vises, turntables)
• Verify that apparatus is in good condition
• Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
• Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
• Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
• Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
• Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
• Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
• Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
• Maintain personal tool certifications, as required
• Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
• Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

• 1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
• 1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
• Experience reading G and M codes

Preferred Qualifications (Desired Skills/Experience):

• Experience with ENOVIA design tool
• Completed training as a journeyman machinist
• Graduated from an Machinist Apprenticeship program or completed a Machining Certificate

Drug Free Workplace :

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.

Union:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay

Applications for this position will be accepted until Mar. 21, 2026

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Engineering Operations Manager - Manufacturing

We are seeking a hands-on technical leader to run operations and drive performance in safety, quality, productivity, and on-time delivery. This role is responsible for leading production teams, improving operational efficiency, and ensuring consistent execution of manufacturing goals.

Key Responsibilities

• Lead daily manufacturing and production operations to meet safety, quality, cost, and delivery targets.
• Manage, coach, and develop production supervisors and hourly teams.
• Monitor KPIs and implement improvements to increase efficiency, throughput, and productivity.
• Partner with Quality, Maintenance, Engineering, and Supply Chain to resolve issues and improve processes.
• Drive Lean Manufacturing and continuous improvement initiatives.
• Ensure compliance with safety regulations and quality standards.
• Support production planning and scheduling to meet customer demand.

Qualifications

• Degree in Engineering or related field preferred.
• 5+ years of leadership experience within a manufacturing environment or production operations.
• Experience with Lean Manufacturing, process improvement, or operational excellence initiatives.
• Strong leadership, problem-solving, and communication skills.

Please reference job code 20605 with your response.

• Determines most practical inspection method and technique; plans sequence of operation; selects precision measuring instruments and equipment to dimensionally inspect units. Performs surface table inspections using standard positioning, measuring and layout instruments and equipment. Uses shop mathematics, decimals and fractions in the performance of the work noted herein.
• Conducts first article, receiving inspection, in-process inspection and final inspection assignments; visually and dimensionally inspects a wide variety of airframes parts and aerospace assemblies/components.
• Witness's first piece part production and certifies acceptability; observes and performs in-process inspection during component build-up and sub-assembly stages; performs final assembly inspection and observes testing operations to assure quality, workmanship and strict compliance with Arrowhead, military space and commercial specifications and standards.
• Inspects incoming metallic and fiber materials, plastic and rubber compounds for correct formulation call- out, serialization, identification, cure date and shelf life; verifies vendor and material certifications; checks heat codes, batch and lot numbers to assure product tractability; certifies the proper mixing and blending of bonding agents and adhesives. Inspects reinforced plastic and rubber products for delaminating, blisters, porosity, bond, elasticity, gauge surface smoothness and similar defects or characteristics. Checks configuration and part dimensions with or without the aid of assembly check gauges, fixtures and tooling. Prepares shipping data package for non-metal (soft goods) components/assemblies in accordance with contractual requirements.
• Monitors oven and cure processes and records temperature readings and dwell time; performs or observes pressurization and leak test using plant air, nitrogen and helium.
• Prepare rework tags, inspection reports and documentation. Coordinates rejection with MRB, engineering and customer representatives for depositions and process refinement. Assembles end item documentation for the review and acceptance of finished products. Prepares and maintains history files, records and reports.
• This job description is not all inclusive of all duties. Other duties may be assigned.

• Requires High School degree or GED. Related AA or trade school degree preferred.
• Requires 2+ years of related Quality Assurance inspection experience. Experience must include interface with customer source representatives, government sources, internal departments and senior management.
• US Citizenship or permanent residency.

• ASQ Certified Quality Inspector preferred
• Experience working in AS9100 production environment preferred
• Must be able to read and analyze engineering drawings and blueprints to determine requirements.
• Must be proficient in the use of basic inspection tools, calipers, scales, height gauges, optical aids, micrometers and GD&T.
• Must have experience with production processes such as assembly, forming, tooling, welding (fusion & resistance), heat treat, cleaning
• Must have experience with production machinery and equipment such as press forming, tube bending and other fabrication.
• Must have knowledge of metallic materials such as stainless, nickel, titanium, aluminum.
• Must have experience with composites materials and production processes such as elastomers, resins, and composite reinforcement material.
• Must be familiar with AS9102 standards and software, and military specifications.
• Experience using Net-Inspect standards and software preferred.
• Must interface effective across organizational levels.
• Must have good organizational skills and maintain accurate, complete documentation.
• Must have excellent communication skills, both written and oral.
• Must be proficient with the use of the Internet, MS Word/Outlook.

• N/A

• Lift up to 50 lbs.
• Push and pull 50 lbs.
• Bend Occasionally
• Sit, Stand, and Walk Frequently

• Working knowledge of NetInspect, Inspection Expert, AS9100, AS9101, Boeing, Northrop, Lockheed Martin, UTAS, Honeywell, and DCMA specifications.
• ASQ Certified Quality Inspector (CQI) certification is expected to be achieved within 12 months from the first day of employment.

Quality Supervisor / Quality Lead / Lead Quality Engineer required to oversee the quality assurance activities at a leading Rotating Equipment manufacturer and solutions provider based in Houston.

Quality Supervisor / Quality Lead / Lead Quality Engineer will be responsible for managing and overseeing inspection and testing processes to ensure that all activities align with company standards, customer requirements, and relevant industry codes. This role will directly support the resolution of quality issues and work towards continuous improvement on the production floor.

Quality Supervisor / Quality Lead / Lead Quality Engineer will work closely with operations, engineering, and project management teams to meet quality objectives, drive improvements, and maintain ISO 9001 certification.

Quality Supervisor / Quality Lead / Lead Quality Engineer Package

Circa $110,000

PTO

401K

Quality Supervisor / Quality Lead / Lead Quality Engineer Responsibilities

• Lead and coordinate the activities of a quality team to ensure accuracy and consistency in all inspection and testing activities.
• Supervise the inspection of rotating equipment components (compressors, turbines, steam actuators) to ensure dimensional, metallurgical, and non-destructive testing compliance.
• Review and approve non-conformance reports, ensuring all documentation is accurate, dispositions are appropriate, and timely closure is achieved.
• Coach, mentor, and develop team members to elevate technical proficiency and prepare them for higher levels of responsibility.
• Support root cause analysis and corrective/preventive action processes to ensure quality improvements.
• Ensure that all inspection equipment is calibrated and that NDT inspector certifications are up to date.
• Collaborate with operations and engineering teams to resolve any quality issues affecting production.
• Assist in customer and third-party audits, ensuring inspection documentation is prepared and available.
• Track inspection performance, identify trends in defects, and report key metrics to management.
• Ensure compliance with the company’s QMS (ISO 9001) and relevant industry codes (API, ASME, AWS).

Quality Supervisor / Quality Lead / Lead Quality Engineer Requirements

• 5+ years of experience in quality assurance or inspection within a manufacturing or service environment.
• 2+ years of supervisory experience, with a strong ability to lead without direct authority.
• Expertise in rotating equipment, including the inspection, assembly, and repair of compressors, turbines, and related components.
• Proficiency with dimensional inspection tools, NDT methods (MT, PT, UT, RT preferred), and welding processes.
• Familiarity with machining practices and processes.
• Knowledge of welding inspection and applicable codes (ASME, AWS) is advantageous.

Relevant professional certifications in quality or health & safety preferred.

• Ability to adapt to changing operational schedules and priorities, working across multiple sites as needed.
• Authorized to work in the United States and able to pass pre-employment drug, alcohol tests, and background checks.