Process Engineering Companies Jobs in Usa

Company Description

Omega EMS has been at the forefront of developing and delivering cutting-edge solutions in Silicon Valley. Our expertise makes us uniquely equipped to supply unparalleled customer service tailored to each individual need – all within a framework that is firmly rooted in CGMPs (Current Good Manufacturing Practices). With our flexible approach, real world operational experience and commitment to serving customers’ needs with excellence, Omega EMS offers an incomparable “one stop solution” for any EMS project.

Role Description

The Process Technician will be a key contributor to Omega EMS’s SMT line, AXI, and process engineering activities for PCB assembly. This role is responsible for ensuring that every stage of the printed circuit board assembly process meets the highest standards of quality and reliability. The ideal candidate is a resourceful problem solver who can overcome technical challenges and implement practical solutions. As a core member of the manufacturing team, the Process Technician works closely with production operators, engineers, and quality staff to support fast-paced, high-mix builds for Silicon Valley’s most innovative companies, delivering world-class manufacturing systems and processes.

Qualifications

Job Responsibilities:

·        Serve as the first line of technical support for PCB assembly production, troubleshooting and resolving process issues in real time.

·        Set up, inspect, and validate SMT equipment and processes, including stencil printers, reflow ovens, SPI, and X-ray, to ensure high-quality first articles and stable production runs.

·        Contribute to the design and fabrication of stencils, tooling, and fixtures, and manage the tooling log to maintain availability and accuracy.

·        Perform X-ray and visual inspections, identify solderability or void issues, and implement corrective actions where needed.

·        Provide hands-on training and guidance to operators and production staff, improving process understanding and capability across the team.

·        Support and collaborate with SMT, AXI, and Engineering on technical inquiries and escalations; elevate unresolved issues to the Supervisor as necessary.

·        Collect and analyze process data to identify trends, drive systemic improvements, and enhance yield and throughput.

·        Maintain a strong focus on safety, quality, and continuous improvement, while being adaptable and open to learning new tasks as required.

Job Requirement:

·        3+ years of hands-on PCBA experience (5+ years preferred).

·        Strong working knowledge of SMT/PCBA processes, including screen printer programming, solder paste inspection, reflow profiling, and X-ray inspection.

·        Ability to read and interpret wiring diagrams, schematic drawings, and engineering instructions, applying knowledge of electronic theory and components.

What We Offer

Paid Vacation

Paid Holidays

401K/ Roth 401K

Medical, Dental, and Vision

**This is a swing shift hourly role and you will earn between $25 and $27 plus 10% differential.

• Process Development & Optimization: Design and refine manufacturing processes to maximize uptime, minimize waste, and meet customer specifications while considering material properties, equipment capabilities, and operator workflows
• Continuous Improvement: Lead Lean and Six Sigma initiatives to drive efficiency and enhance product quality; propose and execute projects using PDCA methodology with clear ROI justification
• Troubleshooting & Problem Solving: Conduct root cause analysis using tools such as Ishikawa diagrams, 5 Whys, and Pareto Analysis; develop corrective actions including A3, 8D, and Supplier Corrective Action Reports (SCAR)
• Data Analysis & Reporting: Analyze process data to identify trends and improvement opportunities; establish data collection methods, train operators, and deliver KPI reports (daily, weekly, monthly, quarterly) to support strategic decisions
  
  

• Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or related field
• 5+ years of experience in process engineering, manufacturing optimization, or continuous improvement roles
• Strong knowledge of Lean Manufacturing and Six Sigma methodologies
• Automotive industry experience preferred
• Familiarity with Core Tools (APQP, PPAP, FMEA, SPC, MSA) is a plus
  
  

Injection Molding | Process Engineer

Specializes in designing and implementing the manufacturing processes for the injection molding department. Driver of safety, continuous improvement objectives, quality control standards, and process activities for engineering technicians and process technicians. Supports the improvement of operations and reducing operating costs.

• Provide support and direction to Process Engineers, PE technicians, process technicians, and production personnel as needed
• Develop and maintain injection molding processes and new manufacturing methods
• Provide course of action for manufacturing issues, out-of-control processes, and quality discrepancies
• Applying root cause analysis practice to solve problems
• Gather and analyze data for understanding and guiding improvement plans for key process indicators including quality, scrap, cycle time, and cost reduction
• Support standardization of equipment and procedures to meet Utz Global and Fit-4-Future initiatives
• Support new mold launches and samplings
• Key user of MES, Authentig, and remote maintenance
• Knowledge source for plant-wide system processes (i.e. Oni, Motan, etc.)
• Interface with various vendors for services, equipment, and capital improvement
• Maintain current documentation used and continue to develop new resources and SOP’s necessary to support process functions and maintain project deadlines
• Work closely with Injection Molding Manager to create and drive employee development plans for applicable team members.
• Provide on-sight training for technical staff as needed as part of employee development
• Assist in maintaining machines and equipment
• Part of a cross-functional team working with Maintenance, Tooling, Design Engineering, and Automation to address issues, complete project goals, and develop improvement ideas
• Capital improvement projects (selection, justification, quoting, installation) and working within budgetary requirements
• Other tasks as assigned by management

Requirements:

• Bachelor’s Degree (Technical, Engineering) preferred Associate Degree considered
• 2 years of experience in injection molding process engineering or
• 7+ years of experience in injection molding process with aptitude to above requirements
• Must be able to communicate well with various team members and present information in a clear, concise manner to all aspects of the organization
• Must follow established company guidelines and perform duties in a satisfactory manner

Director of Engineering – PLM & Data Governance

Location – Evansville, IN

The Director of Engineering – PLM & Data Governance is responsible for the strategy, architecture, governance, and operational reliability of the organization’s digital engineering ecosystem. This role oversees Product Lifecycle Management (PLM), CAD configuration management, and engineering data infrastructure.

This leader ensures that engineering artifacts such as CAD models, bills of materials, specifications, requirements, revisions, and engineering change records are accurate, secure, compliant, and accessible across the organization. The role also supports the development of a consistent digital thread connecting product development, manufacturing, and lifecycle support.

Key Responsibilities

Engineering Systems Ownership

• Provide strategic direction and lifecycle management for PLM, CAD configuration management, and related engineering platforms.
• Define system architecture, configuration standards, lifecycle schemes, and long-term system roadmaps.
• Ensure system reliability, scalability, security, and performance.

Data Governance Leadership

• Establish policies, standards, and controls for engineering and product data.
• Define naming conventions, metadata structures, and data ownership models.
• Ensure regulatory compliance, traceability, and audit readiness.
• Lead master data governance efforts for product-related information.

Digital Thread Integration

• Drive integration between PLM and enterprise systems such as ERP, MES, QMS, analytics platforms, and other business systems.
• Ensure accurate and automated transfer of key product data including:
• Bills of Materials (BOMs)
• Item master data
• Revisions
• Engineering change information
• Enable visibility into engineering utilization and product lifecycle performance.

Change and Configuration Management

• Standardize and automate engineering change workflows including ECR, ECO, ECN, and deviation processes.
• Establish structured and configurable BOM management practices.
• Maintain synchronization between Engineering BOM (EBOM) and Manufacturing BOM (MBOM).
• Implement centralized configuration rules and variant management.
• Ensure automated workflow notifications and task assignments for stakeholders.

Team Leadership and Organizational Development

• Lead and develop the data management team, including PLM administrators, data engineers, and system architects.
• Coordinate activities across distributed or global teams.
• Establish clear process ownership and accountability across engineering data domains.
• Strengthen capabilities in systems administration, governance, and analytics.

Continuous Improvement and Modernization

• Identify opportunities for system enhancements, automation, and workflow improvements.
• Lead multi-year initiatives including:
• PLM platform upgrades
• ERP integrations
• Data governance programs
• Enterprise system integrations
• Reduce manual work, rework, and data errors through process and system improvements.

Training and Capability Development

• Define and standardize training approaches for engineering systems and data management processes.
• Develop documentation and knowledge transfer practices to support system adoption and long-term sustainability.

Requirements

• Bachelor’s degree in Computer Science, Engineering, Information Systems, or a related field
• 10+ years of experience in PLM, engineering systems, or product data management leadership roles
• Experience administering and managing PLM platforms (Autodesk Vault Professional preferred)
• Strong understanding of CAD data management, BOM structures (EBOM and MBOM), and engineering change processes
• Experience integrating PLM with ERP or other enterprise systems
• Demonstrated leadership experience managing technical teams, including distributed or global teams
• Experience establishing data governance standards and improving engineering data systems and processes

Job Title: Engineering Technician (Machine Shop & Fabrication)

Location: West Columbia, SC

Hire Type: Contract to Hire | Full time

Schedule: Mon-Fri 7a-3:30p

Pay Rate: $27/hr

Benefits: Health, Dental, Vision, 401k, PTO

Position Summary

Sterling is seeking a highly skilled Engineering Technician with strong machining, fabrication, and design experience to join our team. This role will support engineering and production initiatives by designing, fabricating, and modifying components, fixtures, and tooling in a machine shop environment. The ideal candidate is a self-starter with extensive hands-on experience in tool and die making, manual machining, and fabrication, capable of working independently while maintaining a strong commitment to safety and quality.

This role will initially be hired as an Engineering Technician III, with the opportunity for promotion to Engineering Technician IV upon transition to a core employee.

Key Responsibilities

• Design, fabricate, and modify tools, fixtures, and custom components to support engineering and production operations.
• Operate and maintain manual machining equipment, including manual lathes, manual mills, and other machine shop tools.
• Perform tool and die making, precision machining, and fabrication work based on engineering drawings and specifications.
• Utilize 3D modeling software to support design, prototyping, and process improvements.
• Develop and edit CNC programs using MasterCam when required to support machining operations.
• Create and present technical documentation, process updates, and project summaries using PowerPoint and Excel.
• Collaborate with engineering teams to design, troubleshoot, and improve mechanical systems, tooling, and fabrication processes.
• Ensure work is performed independently, safely, and in accordance with machine shop best practices and safety standards.
• Maintain a clean and organized machine shop environment and ensure equipment is properly maintained.

Required Qualifications

• 5+ years of experience in a machine shop, tool and die, fabrication, or precision machining environment.
• Associate’s degree or technical certification in Mechanical Engineering Technology, Machining, Tool & Die, or related field.
• Experience supporting engineering prototyping, R&D, or manufacturing process development.
• Experience working in high-precision or prototype fabrication environments.
• Extensive experience operating manual lathes, manual mills, and other machine shop equipment.
• Strong background in tool and die making and custom fabrication.
• Experience using 3D modeling software for mechanical design or component development.
• Proficiency with MasterCam for CNC programming or machining support.
• Strong working knowledge of Microsoft PowerPoint and Excel.
• Ability to read and interpret engineering drawings, blueprints, and technical specifications.
• Proven ability to work independently, troubleshoot problems, and manage projects with minimal supervision.
• Strong commitment to workplace safety and machine shop best practices.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Summary
Under the direction of the Lead Manufacturing Supervisor, the Processing Technician 2 is responsible for supporting the injection molding departments' operational goals. The primary responsibilities of this role will include Start-up of all down machines when ready, attending and actively participating in tech meetings, housekeeping, checking process parameters while ensuring all alarms are on and active, submitting first pieces to the Quality Lab, completing material changes, and setting scales. The Processing Technician 2 will provide troubleshooting support to the production group to correct problems. This role will act as the liaison between Production and the Process Engineering dept. This will be achieved by maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Troubleshooting, diagnosing and making recommendations for processing issues.
  
  
• Starting up presses after; changes (mold changes, conversions, material changes, etc.), rehangs, repairs, mold cleans, or other reasons
  
  
• Regrind and scrap management
  
  
• Assistance with Automation alarms and troubleshooting
  
  
• Enter all downtime and scrap codes accurately for future analysis using the Process Monitoring System (Mattec) as needed.
  
  
• Work with the Industrial Engineering team to ensure proper documentation is created and distributed regarding process sheets and deviations.
  
  
• Respond to inquiries and communicate with other company personnel using the company provided radio as well as follow radio etiquette and policy on a daily basis.
  
  
• Housekeeping (including purge, scrap parts, etc.) and proper storage of equipment, supplies etc.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting: Corporate policies, procedures, work instructions, and required documentation.
  
  

Other Functions

• 
  
  
• Other duties may be assigned.
  
  
• Evaluate current state processing conditions and recommend improvement plans as needed.
  
  
• Developing procedures for production related duties that may be used as reference/training materials.
  
  
• Work on audit preparedness for both internal and external audits.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting all corporate policies, procedures and work instructions.
  
  

Success in this role will require

• 
  
  
• Must have strong troubleshooting skills
  
  
• Ability to communicate with all levels of the organization.
  
  
• Must be detail orientated.
  
  
• Proven ability to work independently or within a team.
  
  
• Strong computer skills.
  
  
• Extensive knowledge of scientific injection molding principles and techniques.
  
  
• Extensive knowledge of DOE principles and techniques.
  
  
• Proven ability to prioritize and multi task.
  
  

What You'll Bring

• 
  
  
• High school diploma or equivalency, required.
  
  
• 3+ years experience as a Process Technician preferred.
  
  
• Must have demonstrated time management skills.
  
  
• Strong communication and interpersonal skills.
  
  
• Excellent mechanical skills required.
  
  
• Must be able to lift push, and pull up to 75 lbs. and be able to stand/walk for 12 hours.
  
  
• Must be able to stand. Walk, and work for up to 12-hour shifts.
  
  
• Excellent troubleshooting skills required.
  
  
• Knowledge of SPC principles.
  
  
• Advanced education in the area of injection molding such as WCTC Apprenticeship program, Paulson Training, RJG training, etc. preferred
  
  

Rev. 6.17.2025

#LI-Onsite

#LI-KN1

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Summary
Under the direction of the Lead Manufacturing Supervisor, the Processing Technician 2 is responsible for supporting the injection molding departments' operational goals. The primary responsibilities of this role will include Start-up of all down machines when ready, attending and actively participating in tech meetings, housekeeping, checking process parameters while ensuring all alarms are on and active, submitting first pieces to the Quality Lab, completing material changes, and setting scales. The Processing Technician 2 will provide troubleshooting support to the production group to correct problems. This role will act as the liaison between Production and the Process Engineering dept. This will be achieved by maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Troubleshooting, diagnosing and making recommendations for processing issues.
  
  
• Starting up presses after; changes (mold changes, conversions, material changes, etc.), rehangs, repairs, mold cleans, or other reasons
  
  
• Regrind and scrap management
  
  
• Assistance with Automation alarms and troubleshooting
  
  
• Enter all downtime and scrap codes accurately for future analysis using the Process Monitoring System (Mattec) as needed.
  
  
• Work with the Industrial Engineering team to ensure proper documentation is created and distributed regarding process sheets and deviations.
  
  
• Respond to inquiries and communicate with other company personnel using the company provided radio as well as follow radio etiquette and policy on a daily basis.
  
  
• Housekeeping (including purge, scrap parts, etc.) and proper storage of equipment, supplies etc.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting: Corporate policies, procedures, work instructions, and required documentation.
  
  

Other Functions

• 
  
  
• Other duties may be assigned.
  
  
• Evaluate current state processing conditions and recommend improvement plans as needed.
  
  
• Developing procedures for production related duties that may be used as reference/training materials.
  
  
• Work on audit preparedness for both internal and external audits.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting all corporate policies, procedures and work instructions.
  
  

Success in this role will require

• 
  
  
• Must have strong troubleshooting skills
  
  
• Ability to communicate with all levels of the organization.
  
  
• Must be detail orientated.
  
  
• Proven ability to work independently or within a team.
  
  
• Strong computer skills.
  
  
• Extensive knowledge of scientific injection molding principles and techniques.
  
  
• Extensive knowledge of DOE principles and techniques.
  
  
• Proven ability to prioritize and multi task.
  
  

What You'll Bring

• 
  
  
• High school diploma or equivalency, required.
  
  
• 3+ years experience as a Process Technician preferred.
  
  
• Must have demonstrated time management skills.
  
  
• Strong communication and interpersonal skills.
  
  
• Excellent mechanical skills required.
  
  
• Must be able to lift push, and pull up to 75 lbs. and be able to stand/walk for 12 hours.
  
  
• Must be able to stand. Walk, and work for up to 12-hour shifts.
  
  
• Excellent troubleshooting skills required.
  
  
• Knowledge of SPC principles.
  
  
• Advanced education in the area of injection molding such as WCTC Apprenticeship program, Paulson Training, RJG training, etc. preferred
  
  

Rev. 6.17.2025

#LI-KN1 #LI-Onsite

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Sterling Engineering is partnering with a well-established manufacturing organization to identify a Design Engineering Manager to lead a multi-site engineering team. This is a high-impact leadership role focused on strengthening team engagement, driving technical excellence, and improving design and development processes across multiple locations.

Responsibilities:

• Lead, manage, and provide hands-on support to a large engineering team across multiple states in the Midwest
• Provide strong, visible leadership with a focus on team engagement, accountability, and performance
• Drive technical direction across product design, tooling, and machine design initiatives
• Increase visibility and support across remote teams to ensure alignment and consistency
• Partner cross-functionally with operations, quality, and leadership teams
• Troubleshoot complex design and engineering challenges and drive continuous improvement
• Establish and improve design processes, standards, and best practices
• Travel regularly to support team collaboration, performance, and project execution

Qualifications:

• 10+ years of engineering experience with a strong background in design and troubleshooting
• Proven leadership experience managing engineering teams (multi-site experience preferred)
• Strong managerial skills with the ability to lead, develop, and engage teams across locations
• Expertise in SolidWorks and mechanical design of products, tooling, or machinery
• Experience with packaging design, preferably within thermoforming, is highly preferred
• Strong problem-solving skills with the ability to drive technical solutions
• Experience in the medical device or food industry design is a plus
• Willingness to travel 25–30%

Pay range and compensation package

• Compensation: $170k-$200k
• Benefits: Medical, Dental, Vision, 401k, PTO, Holiday Pay, Retirement, Life Insurance, and many more….

Hydraulic Design Engineer

Location: Raleigh, NC

Salary: Commensurate with experience + Benefits

About the Role

Wetherill Engineering, Inc. (WEI) is seeking a Hydraulic Design Engineer to support transportation and roadway drainage projects. This role involves hydrologic and hydraulic analysis, stormwater system design, and collaborating with multidisciplinary teams to deliver high-quality solutions.

Key Responsibilities

• Design and analyze roadway drainage, stormwater management, and erosion control systems.
• Perform hydrology and hydraulic analysis for transportation projects.
• Develop plans for stormwater management systems, bridge and culvert hydraulics, and BMPs.
• Utilize MicroStation, GEOPAK Drainage, HEC-RAS, Open Roads Designer, and SUDA.
• Assist in fieldwork to verify site conditions.
• Support project coordination and provide technical direction.

What You Bring

• B.S. or M.S. in Civil Engineering (or related field).
• P.E. license preferred (or ability to obtain).
• 5+ years of transportation hydraulic design experience (NCDOT projects preferred).
• Proficiency in MicroStation, Microsoft Office, and Adobe Acrobat.
• Strong understanding of NCDOT Guidelines, FHWA Hydraulic Design Manual, and erosion control.
• Excellent communication, teamwork, and problem-solving skills.
• Experience or willingness to manage projects is a plus.

Why WEI?

• Competitive salary + health, dental, vision, life, and retirement benefits.
• ESOP, SPSF, HUB-certified firm.
• Ranked among Top MWBE Firms and Top 74 Southeast Engineering Firms (ENR).
• Supportive and collaborative work environment with growth opportunities.

Equal Opportunity Employer | No sponsorship available.

Apply on LinkedIn, at , or email for more information.

This description is not a comprehensive listing of activities, duties, or responsibilities that may be required of the employee and other duties, responsibilities, and activities may be assigned or may be changed at any time with or without notice.

Manufacturing Engineering Technician - 2nd Shift & 3rd Shift

Our client is seeking a dedicated and skilled Manufacturing Engineering Technician - 2nd & 3rd Shift to join their growing team. In this pivotal role, you will play an integral part in supporting manufacturing processes, troubleshooting equipment, and ensuring optimal performance across a range of systems. If you thrive in a fast-paced environment and have a passion for hands-on problem-solving, this opportunity is perfect for you!

Key Responsibilities

• Assist with the calibration, testing, setup, and repair of various controls, instruments, and gauges used in the manufacturing process.
• Monitor equipment performance, making necessary adjustments to setups, calibrations, and alignments.
• Evaluate and diagnose root causes of equipment issues, taking immediate action to resolve problems.
• Identify opportunities for improvement and commonization across processes.
• Collaborate with facilities, operations, maintenance teams, and vendors to facilitate equipment installation and readiness.
• Perform troubleshooting tasks for PLC systems, welding processes, and robotics.
• Track production equipment data, identifying and reporting inconsistencies.
• Read and interpret electrical prints for effective problem resolution.

Qualifications

• Technical degree preferred.
• 2-4 years of practical experience in a manufacturing environment.
• High level of self-motivation and the ability to work independently.
• Proven ability to manage multiple tasks simultaneously.
• Strong interpersonal skills, including facilitation, negotiation, and conflict resolution.
• Proficiency in one or more of the following areas: machine controls, robotics, electrical circuitry, or automated welding systems.
• Excellent communication skills and a collaborative team-oriented mindset.

Preferred Skills

• Familiarity with advanced machine programming and diagnostics.
• Experience in a fast-paced production environment.
• Knowledge of safety protocols and best practices in manufacturing.

Titles Encouraged to Apply

• Manufacturing Technician
• Automation Technician
• Process Engineering Technician
• Maintenance Technician
• Controls Technician
• Robotics Technician
• Electrical Technician

Take the next step in your career and join a team that values technical expertise, innovation, and collaboration. Apply today to make a difference in a dynamic manufacturing environment!