Power Design Electrical Apprentice Pay Jobs in Usa

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Dean of Electrical School (Founding Director)

[Confidential Workforce Development Organization]

Location: [Northwest Arkansas] (On-campus) Employment Type: Full-time Salary Range: $175,000 – $225,000 (Based on experience) Incentive: Up to 20% performance-based annual bonus

Institutional Overview

Our organization is a federally funded, Military and Veteran-exclusive transition and upskilling institution located in the [South-Central United States]. Following the successful launch of its flagship Human Performance school—which has produced thousands of graduates to date—the institution is expanding into the industrial trades.

We are building the most advanced trade training environment in the country, merging hands-on instruction with simulation, immersive VR training, and AI-supported learning systems. Our mission is to modernize skilled trades education and accelerate the development of the next generation of highly skilled American tradesmen.

Position Summary

The Electrical School Director (Founding Director) will play a foundational role in designing and launching a national model for electrical workforce training. This program will combine traditional hands-on apprenticeship-style training with emerging technologies such as immersive simulation, AI-assisted instruction, and virtual/augmented reality environments.

As both a program builder and institutional leader, the Director is responsible for creating a scalable electrical training program that serves as a blueprint for modernizing skilled trades education nationally.

Position Details

• Date Posted: TBD
• Reports To: Vice President, Head of Schools – [Industrial Trades Division]
• Relocation: Relocation assistance available
• Additional Benefits: 401k, professional development, and a comprehensive benefits package

Key Responsibilities

Program Development & Leadership

• Design, develop, and implement a comprehensive electrical training program from inception through launch.
• Establish program goals, learning outcomes, and performance metrics.
• Ensure curriculum aligns with industry standards, applicable codes, and workforce demands.
• Design a training model capable of scaling across multiple campuses as a national blueprint.
• Oversee accreditation, credentialing, and compliance requirements.
• Foster a culture of continuous improvement through innovative teaching methods (Simulation, AI, VR).

Technology & Innovation

• Evaluate and integrate AI-assisted learning tools, simulation platforms, and VR/AR environments into the curriculum.
• Collaborate with technology partners to develop immersive environments replicating real-world job sites.
• Identify opportunities to accelerate learning outcomes using adaptive learning systems.
• Position the organization as a national leader in trade education modernization.

Staff & Workforce Development

• Recruit, hire, train, and supervise a team of electrical instructors.
• Mentor instructors to ensure high-quality, consistent instruction and professional growth.
• Establish instructional best practices and rigorous evaluation processes.

Curriculum & Instruction

• Develop and continuously improve curriculum aligned with NCCER and NEC standards.
• Incorporate simulation and AI-supported training methods where appropriate.
• Ensure hands-on lab instruction meets all safety, quality, and educational requirements.

Operations & Industry Engagement

• Manage program budgets, equipment procurement, and instructional resources.
• Coordinate scheduling, facilities use, and lab operations.
• Build strategic relationships with contractors, utilities, manufacturers, and industry employers.
• Support apprenticeship pathways and job placement for graduates.

Qualifications

Required Qualifications

• Licensure: Master Electrician license OR equivalent senior leadership experience in electrical workforce training/apprenticeship programs.
• Experience: Minimum 10 years of experience in the electrical industry.
• Leadership: Demonstrated experience leading training, workforce development, or technical education programs.
• Knowledge: Deep understanding of NEC codes, safety standards, and industry best practices.

Preferred Qualifications

• NCCER Certified Instructor.
• Experience designing or scaling national apprenticeship or training programs.
• Experience using simulation, VR/AR, or digital learning platforms in a technical environment.
• Demonstrated interest in AI-assisted instruction and immersive learning tools.

Benefits & Work Environment

• Work Environment: A dynamic mix of administrative, classroom, and hands-on lab environments. Strict adherence to electrical safety standards is required.
• Benefits Include:
• Comprehensive Health, Dental, and Vision insurance
• 401(k) with company match
• Paid Time Off (PTO)
• Professional development support

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: A program designed to train a skilled worker through a combination of on-the-job training and classroom instruction to become a Maintenance Technician at American Packaging Corporation. Maintenance Technicians are responsible for electrical and mechanical systems in the facility, which will include troubleshooting and routine maintenance activities. Throughout this program, they will learn to troubleshoot and repair equipment problems that affect productivity of the manufacturing group as well as plant facilities and subsystems. They will learn to be involved with the process improvements providing input in production problem solving.

Approval Process: Applicants will be interviewed and chosen based on their experience, knowledge, and overall work history. The chosen finalists will be required to take and pass an aptitude test.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Duration: 3-4 years for completion

Classroom Training: Several courses required through local school, such as Electrical, Industrial, Mechanical and Machining courses.

Hours of Work: As needed for class schedule, must be flexible.

On the Job Training:

A. Tool and Supply Room (~200 hrs)

Learn size of wire conduit and bending of conduit, use of tools and how to determine the size of load safety.

B. Lighting (~200 hrs)

Replacement of incandescent lamps and hot cathode fluorescent tubes and starters. Repair of fluorescent fixtures, replacing ballast, socket and wiring, code requirements. Repair of LED fixtures, replacing drivers and troubleshooting.

C. Trouble Shooting AC Wiring (~300 hrs)

Learn to locate and repair contactor problems, replacing contacts and contactor. Locate and replace blown fuses. Check and repair limit switches, push buttons, etc.

D. Special Circuits AC (~500 hrs)

Learn to read wiring diagrams. Operation of special control circuits, time delay switches, electrical braking.

E. Direct Current Machinery (~500 hrs)

Learn to locate and repair direct current motor troubles in fields, armatures, bearings, brush holders, and commutators. Knowledge of variable speed DC drives. Repair and maintenance of DC contactors and field control.

F. General Wiring (~500 hrs)

Learn proper handling and installation of power feeding, wiring, fuse panels, breakers, etc. Estimate load requirements. Code requirements. Install general wiring.

G. Instruments (~100 hrs)

Learn proper use and care of voltmeter, ammeter, watt meter, oscilloscope and megger, etc.

H. Computerized Controls (~600 hrs)

Programmable logic controllers: reading diagrams and schematics; maintaining and troubleshooting.

I. Care, Use and Safety of Tools and Equipment (~500 hrs)

Hand tools, power tools, machines and power equipment, ladders, scaffolding and hoists.

J. Machine Repair (Mechanical) (~1500 hrs)

Assembly and disassembly, bearings, power transmission, construction, rigging, lubrication. Safety.

K. Bench Work and Machinery (~300 hrs)

Lathes, milling machines, grinding machines, drill press, power saw, etc. Safety.

L. Pipefitting (~300 hrs)

Layout, installation, repair, replacement, pumps and compressors, valves and controls. Safety.

M. Welding (~500 hrs)

Protective clothing and equipment, burning and cutting, controls and gauges, electric arc welding, properties of metals. Safety.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High School Diploma or Equivalent. Active, regular Full-time employee of American Packaging Corporation. Part-time or temporary employees of APC are not eligible to participate in this program.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, technical procedures, or instructions. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from others.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include color vision.

WORK ENVIRONMENT

While performing the duties of this job, the employees is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Job Title– Electrical Engineer (DRE)

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

Job Title– Electrical Engineer

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

• 
  
• Lead and oversee all project quality control activities to ensure compliance with contract documents, specifications, and company standards.
  
• Supervise, assign, and prioritize work for Quality Control Inspectors; monitor performance and provide coaching and guidance.
  
• Direct implementation of the 3-Phase Quality Control process across all Definable Features of Work.
  
• Review design and construction documents for constructability, quality risks, and contract compliance; escalate issues as needed.
  
• Establish and maintain project-specific quality plans, inspection procedures, and installation checklists.
  
• Oversee field inspections and verification activities, ensuring deficiencies are identified, documented, and corrected.
  
• Lead resolution and closeout of quality and commissioning punch-list items.
  
• Serve as the primary quality interface with Project Management, Construction, Commissioning, GC, Owner, and third-party inspectors.
  
• Make day-to-day operational quality decisions; elevate high-risk or contractual issues to project leadership.
  
• Participate in project and safety meetings to address quality risks, trends, and corrective actions.
  
• Analyze quality data and inspection results to identify trends and drive continuous improvement.
  
• Ensure accurate, timely quality documentation, reporting, and compliance tracking throughout the project lifecycle.
  

• 
  
• The candidate must have a minimum of 10 years electrical construction experience on construction similar to the relevant contract with a high school diploma / GED.
  
• Extensive knowledge of USACE/NAVFAC 3-Phase Quality Control System Experience on military bases, government contracts
  
• Journeyman's Electrical License, preferred and graduate from a certified Apprenticeship Program, preferred
  
• Must pass basic background check
  

• 
  
• Exposure to computer screens for an extended period of time.
  
• Sitting for extended periods of time.
  
• Reach by extending hands or arms in any direction.
  
• Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard.
  
• Listen to and understand information and ideas presented through spoken words and sentences.
  
• Communicate information and ideas in speaking so others will understand.
  
• Read and understand information and ideas presented in writing.
  
• Apply general rules to specific problems to produce answers that make sense.
  
• Identify and understand the speech of another person.
  

Job Title: Electrical Test Engineer - Three Phase and motor

Location: Charlotte, NC

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements

Responsibilities

• Provide leadership to plant electrician staff primarily focused on the installation and repair of electrical controls, automation, motors & starters, lighting, and power distribution on 110V-220V-480V-13,800V systems.
• Manage and expand the application of Predictive Maintenance technologies across the plant to drive improved plant reliability.
• Provide direct supervision to approximately 15 skilled crafts with varying trade skills.
• Provide indirect supervision, technical and safety guidance to 30 plant electricians.
• Schedule and execute all maintenance assignments within area of responsibility.
• Prioritize and lead the upgrade of obsolete plant PLC systems.
• Lead and enhance plant wide Electrical Safety Program to conform to PepsiCo Global Environmental Health Safety Management System(GEHSMS) standards.
• Develop and implement electrical reliability strategic plan to include maintenance improvements and capital upgrades.
• Identify and implement cost savings opportunities for electrical distribution and electrical consumption across the plant.
• Provide technical guidance in all capital projects that replace or update electrical controls or power distribution.
• Lead food safety and employee safety improvements through key GEHSMS and QSHA programs.
• Working knowledge of predictive maintenance technologies including vibration analysis, ultrasonic, and thermography of electrical & mechanical equipment
• Understanding of the NEC, ARC Flash, and Machine Safety Standards.
• Ability to develop electrical design drawings in AUTO CAD, and detailed sequence-of-operation documents.
• Familiar with OSHA, NFPA, and other compliance codes.
• Knowledge and understanding of Allen Bradley family of PLC’s, Operator Interfaces, and VFD’s.
• Able to integrate Control Logix, PLC 5, and SLC’s
• Extensive understanding of power distribution system and power systems calculations
• Experience with various generations of electrical switch gear – 480v to 13.8kv 3-phase systems

Compensation and Benefits

• The expected compensation range for this position is between $73,400 - $122,850.
• Location, confirmed job-related skills, experience, and education will be considered in setting actual starting salary. Your recruiter can share more about the specific salary range during the hiring process.
• Bonus based on performance and eligibility target payout is 8% of annual salary paid out annually.
• Paid time off subject to eligibility, including paid parental leave, vacation, sick, and bereavement.
• In addition to salary, PepsiCo offers a comprehensive benefits package to support our employees and their families, subject to elections and eligibility: Medical, Dental, Vision, Disability, Health, and Dependent Care Reimbursement Accounts, Employee Assistance Program (EAP), Insurance (Accident, Group Legal, Life), Defined Contribution Retirement Plan.

Qualifications

• 4-year technical degree in Electrical Engineering Power System Emphasis or 10 years’ experience in electrical power systems and controls.
• 5 years of electrical design, project management, or electrical maintenance experience.
• Ability to travel 5%
• Strong leadership skills with the ability to deliver results.
• Exceptional people skills with strong commitment to a team approach.
• Familiar with spreadsheets, word processing, and PC's.
• Knowledge and understanding of industrial control networks, Data Highway+, Ethernet, ControlNet, DeviceNet.
• Knowledge and understanding of PanelView, WonderWare, and RSView. Operator interface packages.
• Knowledge of NFPA-70E and how to apply its principles to a large manufacturing site.
• Knowledge and understanding of barcode technology, vision systems, and servo systems.

>

Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901-4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance.

All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity / Age

If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & EEO is the Law Supplement documents. View PepsiCo EEO Policy.

Please view our Pay Transparency Statement

Electrical Test Engineer – Commercial Chiller Systems

Location: Charlotte NC

Job Type: Full time

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities :

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications:

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies :

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements