Power Design Electrical Apprentice Pay Jobs in Usa

Job Opportunity - Electrical Engineer

Location : New Freedom, PA

Duration : Long term

Position Summary

The Electrical Engineer will support product optimization initiatives through design analysis, component evaluation, simulation, and testing activities. This role involves reviewing existing product designs, identifying opportunities for component standardization, conducting simulations, and supporting testing and troubleshooting of electrical systems, including 3-phase systems. The ideal candidate is detail-oriented, technically sound, and eager to contribute in a collaborative engineering environment.

Key Responsibilities

• Research and analyze existing product designs to identify redundant components and recommend design optimizations.
• Review and analyze Bills of Materials (BOMs) to identify opportunities for component commonization and cost reduction.
• Interpret technical drawings, schematics, and electrical documentation accurately.
• Perform circuit simulations to evaluate the feasibility of component substitutions and validate design changes.
• Participate in testing and troubleshooting of 3-phase electrical systems, proactively identifying and resolving issues under the guidance of senior engineers.
• Utilize test equipment such as oscilloscopes, power analyzers, and related diagnostic tools.
• Maintain comprehensive documentation of design modifications, simulations, test procedures, and results.
• Collaborate with cross-functional teams to ensure design integrity and compliance with applicable standards.

Required Qualifications

• Bachelor’s degree in Electrical Engineering or a related discipline.
• Solid understanding of fundamental electrical engineering principles.
• Strong analytical skills with attention to detail.
• Ability to read and interpret technical drawings, schematics, and BOMs.
• Familiarity with electrical test equipment such as oscilloscopes and power analyzers.
• Knowledge of electrical components and systems.
• Strong communication and teamwork abilities.
• Willingness to learn and adapt in a fast-paced engineering environment.

Preferred Qualifications

• Hands-on experience in electrical testing and troubleshooting, including independent resolution of circuit- and system-level issues.
• Experience with circuit simulation tools such as SPICE or Saber.
• Familiarity with applicable industry standards and regulatory requirements.
• Exposure to 3-phase motors and related systems.

Job Title: Electrical Test Engineer - Three Phase and motor

Location: Charlotte, NC

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements

Responsibilities

• Provide leadership to plant electrician staff primarily focused on the installation and repair of electrical controls, automation, motors & starters, lighting, and power distribution on 110V-220V-480V-13,800V systems.
• Manage and expand the application of Predictive Maintenance technologies across the plant to drive improved plant reliability.
• Provide direct supervision to approximately 15 skilled crafts with varying trade skills.
• Provide indirect supervision, technical and safety guidance to 30 plant electricians.
• Schedule and execute all maintenance assignments within area of responsibility.
• Prioritize and lead the upgrade of obsolete plant PLC systems.
• Lead and enhance plant wide Electrical Safety Program to conform to PepsiCo Global Environmental Health Safety Management System(GEHSMS) standards.
• Develop and implement electrical reliability strategic plan to include maintenance improvements and capital upgrades.
• Identify and implement cost savings opportunities for electrical distribution and electrical consumption across the plant.
• Provide technical guidance in all capital projects that replace or update electrical controls or power distribution.
• Lead food safety and employee safety improvements through key GEHSMS and QSHA programs.
• Working knowledge of predictive maintenance technologies including vibration analysis, ultrasonic, and thermography of electrical & mechanical equipment
• Understanding of the NEC, ARC Flash, and Machine Safety Standards.
• Ability to develop electrical design drawings in AUTO CAD, and detailed sequence-of-operation documents.
• Familiar with OSHA, NFPA, and other compliance codes.
• Knowledge and understanding of Allen Bradley family of PLC’s, Operator Interfaces, and VFD’s.
• Able to integrate Control Logix, PLC 5, and SLC’s
• Extensive understanding of power distribution system and power systems calculations
• Experience with various generations of electrical switch gear – 480v to 13.8kv 3-phase systems

Compensation and Benefits

• The expected compensation range for this position is between $73,400 - $122,850.
• Location, confirmed job-related skills, experience, and education will be considered in setting actual starting salary. Your recruiter can share more about the specific salary range during the hiring process.
• Bonus based on performance and eligibility target payout is 8% of annual salary paid out annually.
• Paid time off subject to eligibility, including paid parental leave, vacation, sick, and bereavement.
• In addition to salary, PepsiCo offers a comprehensive benefits package to support our employees and their families, subject to elections and eligibility: Medical, Dental, Vision, Disability, Health, and Dependent Care Reimbursement Accounts, Employee Assistance Program (EAP), Insurance (Accident, Group Legal, Life), Defined Contribution Retirement Plan.

Qualifications

• 4-year technical degree in Electrical Engineering Power System Emphasis or 10 years’ experience in electrical power systems and controls.
• 5 years of electrical design, project management, or electrical maintenance experience.
• Ability to travel 5%
• Strong leadership skills with the ability to deliver results.
• Exceptional people skills with strong commitment to a team approach.
• Familiar with spreadsheets, word processing, and PC's.
• Knowledge and understanding of industrial control networks, Data Highway+, Ethernet, ControlNet, DeviceNet.
• Knowledge and understanding of PanelView, WonderWare, and RSView. Operator interface packages.
• Knowledge of NFPA-70E and how to apply its principles to a large manufacturing site.
• Knowledge and understanding of barcode technology, vision systems, and servo systems.

>

Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901-4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance.

All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity / Age

If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & EEO is the Law Supplement documents. View PepsiCo EEO Policy.

Please view our Pay Transparency Statement

Job Opportunity - Electrical Engineer

Location : New Freedom, PA

Duration : Full Time

Position Summary

The Electrical Engineer will support product optimization initiatives through design analysis, component evaluation, simulation, and testing activities. This role involves reviewing existing product designs, identifying opportunities for component standardization, conducting simulations, and supporting testing and troubleshooting of electrical systems, including 3-phase systems. The ideal candidate is detail-oriented, technically sound, and eager to contribute in a collaborative engineering environment.

Key Responsibilities

• Research and analyze existing product designs to identify redundant components and recommend design optimizations.
• Review and analyze Bills of Materials (BOMs) to identify opportunities for component commonization and cost reduction.
• Interpret technical drawings, schematics, and electrical documentation accurately.
• Perform circuit simulations to evaluate the feasibility of component substitutions and validate design changes.
• Participate in testing and troubleshooting of 3-phase electrical systems, proactively identifying and resolving issues under the guidance of senior engineers.
• Utilize test equipment such as oscilloscopes, power analyzers, and related diagnostic tools.
• Maintain comprehensive documentation of design modifications, simulations, test procedures, and results.
• Collaborate with cross-functional teams to ensure design integrity and compliance with applicable standards.

Required Qualifications

• Bachelor’s degree in Electrical Engineering or a related discipline.
• Solid understanding of fundamental electrical engineering principles.
• Strong analytical skills with attention to detail.
• Ability to read and interpret technical drawings, schematics, and BOMs.
• Familiarity with electrical test equipment such as oscilloscopes and power analyzers.
• Knowledge of electrical components and systems.
• Strong communication and teamwork abilities.
• Willingness to learn and adapt in a fast-paced engineering environment.

Preferred Qualifications

• Hands-on experience in electrical testing and troubleshooting, including independent resolution of circuit- and system-level issues.
• Experience with circuit simulation tools such as SPICE or Saber.
• Familiarity with applicable industry standards and regulatory requirements.
• Exposure to 3-phase motors and related systems.

Electrical Test Engineer – Commercial Chiller Systems

Location: Charlotte NC

Job Type: Full time

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities :

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications:

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies :

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements

In our 'always on' world, we believe it's essential to have a genuine connection with the work you do.

Aurora Networks is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products

.

We’re looking for bold thinkers and exceptional builders—engineers who thrive in highly technical environments and want to design hardware that powers the connected world. If you enjoy solving tough engineering challenges, collaborating with a talented cross‑functional team, and owning designs from concept through production, this is the role for you.

How You’ll help us connect the world:

As a Power Hardware Engineer reporting to the Sr. Manager of Hardware Engineering, you will play a key role in architecting and developing stand‑alone and embedded power supplies for indoor and outdoor CATV/networking equipment. You’ll work hands‑on across the entire product lifecycle—from early concept, modeling, and prototyping to validation, manufacturing, and sustaining engineering.

What You’ll Own

• Lead electrical design of SMPS‑based power supplies from concept through production release
• Design for challenging environments, ensuring high reliability and robustness
• Perform electrical, thermal, and DVT measurements throughout all stages of development
• Model, breadboard, and build prototypes for rapid iteration and validation
• Design and specify custom magnetic components for advanced SMPS designs
• Develop and optimize digital and analog control interfaces
• Mitigate input/output noise and improve power quality and efficiency
• Provide sustaining engineering support for existing power supply platforms
• Partner with manufacturing and supply chain teams to qualify alternate components and improve production efficiency

Required Qualifications:

• 7+ years of hands‑on SMPS design experience, including topologies such as Forward, Flyback, Buck, Boost, etc.
• Deep experience designing and specifying magnetics for power conversion
• Strong background in analog and digital power control circuits
• Solid understanding of noise mitigation, EMI/EMC considerations, and power integrity
• Strong knowledge of discrete semiconductors and passive components
• Proficiency with electrical modeling and simulation tools (e.g., SPICE‑based tools, simulation suites)

• Re-location assistance will be provided for candidates within U.S.

.Important Candidate Notice: On January 9, 2026, CommScope finalized the sale of its Connectivity and Cable Solutions segment, which included the CommScope name and brand, to Amphenol Corporation. The remaining businesses — Access Networks Solutions (now rebranded as Aurora Networks) and RUCKUS Networks have been unified under the new parent company, renamed as Vistance Networks. The role being advertised is part of Aurora Networks.

Why Join Us?

Vistance Networks shapes the future of communications technology, pushing past what is possible. We deliver solutions that bring reliability and performance to a world always in motion. Our global team of innovators and employees are trusted advisors who listen to customers first, then deliver

value.

Aurora Networks (formerly CommScope’s Access Networks Solution segment) is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products.

If you want to grow your career alongside bright, passionate, and caring people who strive to create what's next…..come connect to your future at Vistance Networks.

Vistance Networks is an Equal Opportunity Employer (EEO), including people with disabilities and

veterans.

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the wellbeing of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

The Campus Engineering team exists to provide support to all aspects of design, construction, operation, and maintenance of campus facilities. Campus facilities include not only the buildings which are occupied by our students, faculty and staff, but it also includes central campus utility plants and the associated utility systems, including chilled water, steam, power, and natural gas

During the design process, first, our Team creates and maintains the design standards for building systems, including HVAC, plumbing, power distribution, and lighting. These standards are used by us, and by our outside consultants, to guide the design efforts of new buildings and renovation projects. Our team is also responsible for reviewing the design documents created by the consultants to ensure that their designs comply with standards.

During construction projects, our Team is often called upon to provide advice related to unforeseen conditions which are discovered during demolition work. We often provide a second review of material and equipment submittals, as well as shop drawings. On most campus construction projects, the day-to-day interaction with the contractor is managed by our co-workers within one of the Construction teams. However, on a few projects we may be called on to manage those day-to-day contractor activities.

Post construction, and throughout the life of the facilities, our team serves to provide advice to our Operation & Maintenance teams, and our Utilities Maintenance team, when a problem grows larger than their capacity. We also plan and prepare the way for projects to replace equipment as it nears the end of life. We are always looking ahead for opportunities to increase efficiency and resiliency in the systems.

If you have experience in this type of work, please consider applying to join our Team.

Provide basic electrical engineering services in support of either the operation and maintenance of the campus electrical distribution system or the design, construction and operation of electrical equipment, components or systems associated with research efforts within an academic or research unit. This position will interact on a consistent basis with: facilities management and utilities personnel or research management and faculty; co-workers, vendors, suppliers and contractors. This position typically will advise and counsel: management personnel. This position will supervise: NA.

Job Duty 1 -
Perform basic design and installation of electrical electrical/electronic components

Job Duty 2 -
Review and provide input to engineering plans and specifications for electrical systems

Job Duty 3 -
Perform basic troubleshooting associated with electrical systems; may involve calibration and repair work.

Job Duty 4 -
Prepare drawings, schematic diagrams and related documentation associated with electrical components and systems

Job Duty 5 -
Monitor expenses incurred; prepare related reports

Job Duty 6 -
Interact with vendors regarding procurement and delivery issues

Job Duty 7 -
Perform other duties as assigned

Educational Requirements
Bachelor's Degree in Electrical Engineering or equivalent combination of education and experience

Other Required Qualifications
Computer knowledge: ability to search for data, input/edit information, word processing, design custom reports; software knowledge includes Windows, Excel, MS Word and PowerPoint. Position has responsibility for formally representing the voice of the constituent/customer to Georgia Tech and is vital to effective marketing and communications by the Institute.

Required Experience
0-2 years of job related experience

Additional Preferred Qualifications
Engineer in Training (EIT) or Professional Engineer (PE)

Preferred Educational Qualifications
Additional Bachelor's Degree in other Engineering discipline or Master's Degree in applicable field, or State Trade License in any applicable field

SKILLS
This job requires entry professional level knowledge and skills in the application of electrical engineering principles, processes and practices. Skills in application of regulations, codes and safety practices associated with electrical systems is required as is the use of office and engineering/technical related computer applications, databases and systems.

The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Job Code: S5

Pay Range Starting At: $49,894.00 - $67,855.00

Location: Atlanta, GA

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening

Project description

In this role, you will be responsible for the collaboration and interactions in the review of specific customer application(s) using electric technologies for the Low and Medium Voltage power systems for Production Enhancement Product Service Lines (PSL). Also, you will support the delivery/commissioning of these state-of-the-art technology solutions for challenging applications in oil & gas to improve operational efficiency, lower costs and emissions, and maximize well productivity. You will need to be creative, dynamic, passionate, and data-driven with the ability to effectively communicate and influence the internal teams and/or customers to deliver best-in-class solutions. This is a high visibility position where the incumbent is expected to frequently interact with Technology, business leadership, and customers to formulate and plan technology delivery for electrical power systems applications.

Responsibilities

Cultivate a culture of collaboration in the electrical low and medium voltage power systems to ensure that state-of-the-art technology is applied in the development of new customer technical solutions.

Hands on experience in the development of applications of electrical equipment and systems including micro-grids, utility electrical interfaces, natural gas (NG) generators and turbines using industrial electrical distribution, medium voltage switchgear, transformers, motor control centers, AC motors, and protection systems for mobile applications.

Actively collaborate with other personnel engaged in equipment design, maintenance, and operation to ensure safe, reliable deployment of high-performance solutions meeting customer requirements.

Interact closely with suppliers to ensure performance, reliability and quality of components and subsystems.

Skills

Must have

-Minimum of bachelor's degree in electrical engineering with at least 5 years of electrical power systems engineering experience or related/applicable experience. Master's degree is highly desired but not required.

-Experience working with customers in the use/application/selection of mobile electrical gear to solve customer specific solutions, and knowledgeable with electrical analysis and in the use of commercial software such as SKM preferred, or ETAP, etc.,

-Experience with large-scale industrial processes (chemical, pharmaceutical, oil & gas refining) is essential to be successful in this role.

-Understanding of the commissioning of power systems solutions (low & medium voltage), using utility power, micro-grids, and mobile power generation (NG gas turbine & recip. engines), and demonstrated troubleshooting skills is desired, but not required.

Join Ingenuity Engineers, Inc. as an Electrical Engineer II and become an essential part of our dynamic team! In this role, you'll work side by side with talented Project Engineers and Project Managers to craft, detailed electrical design documents. Your work will play a key role in ensuring that our projects are compliant and ready for permits. If you're passionate about shaping the future of electrical design and want to be a part of a forward-thinking team, we want to hear from you!

Key Responsibilities:

• Understands advanced electrical theory/calculations, electrical system components and devices.
• Interprets codes, standards and design inputs with the ability to apply them within the design.
• Develops calculations, design narratives and work plans to be used as the basis of design of power, lighting and fire alarm plans, single line/riser diagrams, panel and light fixture schedules and project specifications with minimal direction.
• Assumes the role of Engineer of Record for own projects.
• Reviews the work of others and gives specific guidance to the project team to advance the design.
• Provides mentorship to team members with less experience and training.
• Applies advanced engineering principles to solve technical and coordination issues.
• Manages project designs and budgets with limited oversight.
• Attends internal and client coordination meetings, provides direction, make technical decisions and ensure project goals are achieved.
• Performs site visits and investigations with little or no supervision if needed and resolve any challenges encountered.
• Cultivates relationships with clients to foster additional projects.
• Enhances leadership and management abilities.
• Provides cross-disciplinary technical and engineering assistance.
• Contributes to development efforts.
• Refines and develops processes to improve efficiency and quality.
• Takes personal ownership of the work produced.

Required Qualifications:

• Bachelor’s degree with P.E.
• Extensive proven relevant technical and field experience.
• Previous Leadership experience preferred.
• Experience working in a professional A/E office, Consulting Firm, Construction Contractor, or equivalent.
• Proficiency in Revit, AutoCAD, Microsoft Office, Bluebeam and other basic software.
• Strong written, verbal and communication skills with the ability to participate in a collaborative team environment, including coordination with people/teams outside of the company.
• Comprehensive understanding of the components of mechanical, plumbing, and fire protection systems that require power, with the ability to integrate those requirements into the electrical design.
• Ability to sit, stand, walk for extended periods, with occasional bending and the capacity to lift up to 10 lbs. as needed.
• Ability to travel