Photon Jobs in Usa

Overview:

Himax Technologies is on the lookout for an experienced Pixel Design Engineer to join our Advanced R&D team in Irvine, California. If you have the right skill set, are detail-oriented with excellent problem-solving and analytical skills and have effective communication skills and the ability to work collaboratively within a team. We would like to hear from you.

This is an in-person position at our Irvine office.

Responsibilities:

This role will participate in new pixel designs and improvements of existing pixels by working closely with other design teams. This position is responsible primarily for pixel layouts including front-end, back-end and optical structure.

> Skillful and creative on optimizing pixel layout based on:

• Process flow information
• Layout design rules
• Pixel timing constraints and noise analysis
• Signal interferences analysis inferred by Capacitance extractions

> Pixel array composition, including:

• Implementing the floorplan of a pixel array
• DRC and LVS verifications on whole pixel array
• The layouts of dark pixel reference and other special pixels
• Interfaces with readout and pixel driver circuits
• Optical structure extensions beyond the active array boundaries

> Optical Design:

• Optimize optical structure layout shifts to accommodate image height dependent module lens CRAs

Requirements:

• Bachelor's degree with 10+ years or Master's degree with 7+ years of hands-on experience with CIS pixel layout
• Masterful on IC layout related EDA tools and layout parasitic capacitance extraction EDA tools
• Knowledgeable about typical physics, basic timing and operation principles of CIS pixel
• Medium level programming skills.

Preferred Experience:

• Background is Electrical Engineering, Physics or Photonics.
• Familiar with CMOS image sensor process integration, device physics and optics are good pluses.

Salary Range

• $120,000- $180,000 (DOE)

The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role.

Location: Irvine, CA (on-site)

Attending AAD March 27th - 31st! Visit our booth #2857

From Lasers to Leadership: Advance Aesthetic Dermatology in Tucson!

BE/BC Dermatologist with Aesthetic and Laser Focus Faculty Position

University of Arizona – Tucson

In partnership with the University of Arizona and Banner University Medical Group, the Department of Dermatology is currently hiring a BE/BC Dermatologist to join our clinical faculty in sunny Tucson, AZ. This role will consist of laser dermatology (medical and aesthetic) along with general dermatological clinical responsibilities at ambulatory center. Excellent opportunity to join a supportive faculty team involved in medical education, including key teaching roles for medical students, residents and fellows. This group is searching for a team player who is passionate about excellence in patient care and academic medicine. Join a growing dermatology department and established practice, creating an exciting opportunity to lead the community in innovative directions.

Our Multispecialty Laser and Aesthetic Program offers a range of laser treatments and aesthetic services including treatment of vascular lesions (including children with PWS), scars, tattoos, dyspigmentation, laser hair removal, photorejuvenation and more. Our center has 8 laser devices with room for more.

Practice Highlights:

• Full Time Employment (1.0 FTE)
• M–F, flexible hours Multispecialty Laser and Aesthetic Program: Unique opportunity to practice in close collaboration with ENT and plastic surgeons
• Up to $460k base salary + incentives or bonuses
• Paid excess call
• $100,000 Education Loan Repayment
• Multispecialty Laser and Aesthetic Program: Leadership opportunities for qualified candidates
• Support: Laser certified aesthetic and laser program coordinator already in place to support clinical operations
• Equipment availability with opportunity for expansion: VBeam PDL, Deka DOT CO2, Excel V 532nm, ATV, Conbio Erbium, Palomar Starlux, Lumenis M22, and Gentle Max Pro
• Established collaborations with the UA Bioengineering department and the James C. Wyant College of Optical Sciences widely renowned as a leading institution in the field of optics and photonics in the US with opportunities for academic engagement
• Collaborative environment among faculty with a thriving Dermatology residency program and Mohs fellowship
• Main site: Banner University Medical Clinic - Pima Canyon, ambulatory location
• Practice and inpatient call on equal rotation with excess call pay available – Consults Only
• Patient Load: 16 patients per session on average (General dermatology sessions)
• Well supported clinical operation with MAs, scribes, and on site prior auth personnel
• Extremely competitive compensation with attractive opportunity to earn incentives.
• Loan repayment and relocation/sign on bonus
• Comprehensive benefit package
• Family friendly affordable city with an average of 300 or more sunny days each year and plenty of outdoor activities all year round

Qualifications:

• ABD BE/BC in Dermatology
• Valid AZ Medical License upon start
• Excellent communicator that is able to collaborate with a multi-disciplinary team.
• Faculty appointment is commensurate with experience.
• Experienced in laser and aesthetics procedures (preferred)
• Graduating residents and practicing dermatologists are welcome to apply!

Benefits:

Banner University Medical Group offers a generous salary and recruitment incentives, along with an industry leading benefits package that provides security for you and your family:

• Sign-on/relocation bonus
• Eligible for benefit coverage within 30 days
• Comprehensive medical, dental, vision and pharmacy plans
• 5 CME days, with $5,000 in reimbursement each year
• Paid malpractice, licensure & DEA registration fees
• 401k retirement plan with 4% match after one year of service
• Financial savings resources
• Career advancement and optimal work/life balance
• Employee Discounts
• Tuition benefits for you and your immediate family (qualifications/restrictions apply)

About Our Community

Tucson is a bustling, vibrant community nestled in the blooming Sonoran Desert. Thriving culture, entertainment, and a world class food scene minutes away with a booming housing market and attractive cost of living to live, work, and play!

High Quality of Life in a Low-Stress Setting

Tucson combines the benefits of a mid-sized city with a relaxed pace of life. Enjoy over 300 days of sunshine a year, stunning mountain views, and abundant outdoor recreation—from hiking and cycling to world-class golf and tennis. The cost of living is significantly lower than in coastal metro areas, with affordable housing and minimal commute times.

Cultural and Academic Richness

As a UNESCO City of Gastronomy, Tucson boasts a vibrant food scene alongside a deep cultural heritage. The city is home to the University of Arizona, fostering a collaborative academic and research environment. The arts, music, and festival scenes are thriving, and there’s easy access to both Phoenix and the U.S.-Mexico border for broader experiences.

Family-Friendly and Welcoming

Tucson is an ideal place to raise a family, with excellent schools (including nationally ranked charter options), supportive neighborhoods, and an inclusive, welcoming community.

About Banner University Medical Center Tucson:

As one of the largest tertiary care academic medical centers in the Southwest, BUMCT is committed to providing cutting-edge patient care, conducting groundbreaking research, and educating the next generation of healthcare professionals. Our latest expansion includes a nine-story hospital tower with over 200 new patient rooms and 19 new operating rooms, reflecting our dedication to growth and innovation.

Submit your CV today for immediate consideration!

As an equal opportunity employer, Banner University Medical Group (BUMG) values culture and encourages applications from individuals with varied experiences and backgrounds. BUMG is an Equal Opportunity Employer.

POS13558

Avo Photonics is a dynamic contract engineering services company that designs, develops, and manufactures custom opto-electronic products for a large customer base. Members of our staff can design, prototype, and produce next generation products for a diverse range of markets including environmental, medical, automotive, military, industrial, aerospace, and communications.

We seek a diligent, dedicated and meticulous Payroll Manager who will help to further our success and reputation in the industry through world-class service.

Specifically:

• Oversee and manage payroll operations, ensuring accurate and timely payroll processing and compliance with laws and regulations, and company policies.
• Provide strong leadership and mentorship to the payroll staff, fostering a culture of excellence and continuous improvement.
• Develop, document, and implement policies and procedures for payroll operations.
• Administer and maintain payroll systems, ensure data integrity, and lead implementation of system upgrades and enhancements as required.
• Ensure department procedures and systems maintain confidentiality and protection of payroll information (payrates, personal information, etc.) per company policy and data privacy regulations.
• Collaborate with HR, finance, and other departments to gather and validate payroll information, such as new hires, terminations, promotions, and salary changes.
• Assist with internal & external audits, ensuring adherence to deadlines and compliance with audit requirements.
• Address employee inquiries and concerns related to payroll, providing exceptional customer service and support.
• Stay updated on payroll regulations, tax laws, and industry trends, implementing necessary changes to ensure compliance and best practices.

Requirements:

• Bachelor's degree in accounting, finance, business administration, or related field required.
• Payroll accreditation (Certified Payroll Professional (CPP)) is preferred.
• 5–7+ years of progressive experience processing payroll in a high volume, multi-state/international environment to include at least 2 years of supervisory experience.
• Advanced proficiency in Excel, and payroll systems (Workday preferred).
• In-depth knowledge of payroll tax regulations, wage and hour laws, and compliance requirements.
• Ability to exercise discretion, judgment, and confidentiality.
• Excellent verbal and written communication skills.
• Strong attention to detail, along with excellent organizational skills.
• Excellent customer service skills.

Apply: Avo Photonics offers competitive salaries and a comprehensive benefits package. Apply today!

Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.

Avo Photonics is a dynamic contract engineering services company that designs, develops and manufactures custom opto-electronic products for a large customer base. Members of our staff have the opportunity to design, prototype and produce next generation products for a diverse range of markets including environmental, medical, military, industrial, aerospace, and communications.

We seek a diligent, dedicated and meticulous person who will help to further our success and reputation in the industry through world-class customer service. The successful candidate must plan his/her own work schedule, keep multiple records, be self-motivated, maintain a professional presence, and have the desire to take ownership of projects.

This role may be suitable for a junior or senior engineer.

Specific:

• Develop high yield, cost efficient, manufacturable processes as appropriate for target production volumes
• Act as end-to-end owner of key equipment such as die bonders, wire bonders, seam sealers, laser welders, etc
• Provide subject matter expertise for process development on equipment you own. Understand tool capability, process viability, and material selection
• Own maintenance, upgrade, and repair of equipment you own. Ensure minimal production downtime through regular preventative maintenance. Understand the function of the tools inside and out, in order to resolve issues as quickly as possible
• Provide data-based evidence that developed processes meet product requirements through design of experiments and statistical process control (within material availability)
• Generate documentation of the process development lifecycle for each project; contribute to business knowledge repositories for fixtures, materials, and process parameters
• Create work instructions and provide training on resultant processes to Product Engineering and Manufacturing personnel
• Guide the design of fixtures required to assemble products
• Recommend and implement new equipment and techniques to improve process capabilities

Requirements:

• B.S. in Physics, Material Science, or relevant Engineering field
• 5 years experience with precision optical alignments or programming automated manufacturing equipment
• 5 years of experience in design of experiments and statistical process control.
• 3 years of manufacturing experience
• Proficiency with software-based logic, such as programming, Matlab, etc.
• Excellent communication skills and willingness to learn

Avo Photonics offers competitive salaries and a comprehensive benefits package.

Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.

We're looking for a strategic Director of Product Line Management to lead our coherent optics portfolio in a high-impact, cross-functional role driving product, engineering, and commercial strategy.

In this role, you'll lead our next-gen optical solutions, spanning 100G to 1.6T transceivers and DSPs, driving product, engineering, and commercial strategy. You'll own the roadmap, guide products from concept to launch, and lead business decisions around pricing, positioning, and customer alignment.

What You'll Do:

• Define and execute the global strategy and roadmap for coherent transceivers and DSP products.
• Own the full business process—from opportunity identification through product launch and lifecycle management.
• Lead pricing strategy, margin optimization, and overall P&L for your portfolio.
• Partner cross-functionally with Engineering, Sales, Operations, Finance, and Supply Chain to align technical and commercial goals.
• Capture and prioritize market, product, and feature requirements (MRDs & PRDs).
• Track and analyze competitive trends to inform product direction.
• Represent Arycs Technologies at customer meetings and industry events.
• Drive pilot programs, sample engagement, and early customer adoption.
• Deliver regular updates on business case performance and KPI tracking.
• Co-create marketing content and sales enablement tools.

What You'll Bring:

• 10+ years of experience in PLM, product marketing, or technical leadership roles within the optical networking or semiconductor space.
• Deep understanding of coherent optics, DSP architectures, and industry standards (ZR/ZR+, LR, etc.).
• Proven ability to own and deliver complex product strategies with P&L accountability.
• Exceptional communication skills—you can engage confidently with engineers, executives, and customers alike.
• Analytical, organized, and process-driven with strong decision-making skills.
• Master's degree or higher in Electrical Engineering, Photonics, or a related technical field.
• A strong industry network and customer-facing experience are essential.

We Offer:

• A fast-paced, high-growth culture where your work truly matters.
• Competitive incentive bonus compensation.
• Flexible work arrangements and generous paid time off.
• Health benefits and retirement plans (401k for U.S.-based roles).
• Ongoing career development in a collaborative, international setting.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Job Summary:

The RF Microelectronics/Module Design & Foundry Services Department at Raytheon in Andover, MA, is currently seeking a Principal Electro-Mechanical Engineer to develop leading-edge miniaturized 3DHI sensors and systems to enable future generation technologies across Raytheon.

The successful candidate will be a highly motivated "self-starter" who will apply strong mechanical and electrical engineering skills to implement innovative solutions to challenging design criteria. They will be involved in research efforts including initial concepts, advanced technology demonstrations, and will have the opportunity to follow product development from beginning to end, including documentation, fabrication, assembly, and test/delivery of a range of microelectronics products. This position requires strong interpersonal, written, and verbal communication skills to maintain positive relationships & satisfaction with Program leadership (Engineering and Program Management). Knowledge of semiconductor manufacturing processes and materials and prior experience working with contract manufacturers (OSATs) is highly desired.

The role requires knowledge of high-density microelectronic packaging designs including Interposers, organic substrates, wafer and chip bumping and general knowledge in areas of electronic components/devices such as ASICs and FPGAs, design of electronic packaging chassis and structures, interconnects (connectors/cables), and thermal management design of high-density electronic systems and electronic enclosures. The successful candidate will have the ability to bring new and fresh ideas to the team, with opportunities to explore research and innovation areas in a collaborative and fun team environment. Additionally, the candidate is expected to follow established procedures in creation of technical data package work products, while working closely with program management and functional supervision to ensure the overall design objectives are met.

What You Will Do:

• Work with cross-functional hardware engineering teams to develop advanced microelectronics packages including 3DHI, 3D, and 2.5D (interposer + chiplets) and novel material and process solutions for RF, digital, mixed-signal, and photonics products
• Leverage industry-leading manufacturing and novel materials to achieve new levels of electro-mechanical performance and reliability

Qualifications You Must Have:

• Typically requires a Bachelor's Degree in a Science, Technology, Engineering & Math (STEM) Field and a minimum of Eight (8) or more years of relevant experience (An advanced STEM degree could count for 3 years of experience) with mechanical and electrical engineering design.
• Experience performing circuit layout design using 2D CAD tools
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer:

• A Master's degree or PhD. in a Science, Technology, Engineering & Math (STEM) Field
• Experience in RF circuit design, including 3D EM simulation in HFSS or similar tools
• Circuit layout design experience using 2D and 3D CAD tools (Cadence Virtuoso and/or Allegro/APD+)
• Experience and familiarity with selection and oversight for semiconductor wafer processing and finishing (plating, bumping, dicing)
• Design experience with 3D and 2.5D packaging, complex CAD/EDA software design workflows, and RF/Thermal/Digital co-design
• Experience qualifying and implementing cutting edge materials, fabrication techniques, and understanding of relevant materials used in semiconductor manufacturing and packaging
• Strong background in development, documentation, fabrication, assembly, and test/delivery of military/defense and/or commercial state-of-the-art electronic products
• Experience with designing electronics for extreme environmental requirements and design constraints
• Proficiency with 3D Mechanical CAD modeling and analysis tools (e.g., Solidworks, Creo).
• Experience in Geometric Dimensioning and Tolerance analysis for drawings
• Current DoD Secret level security clearance
• Innovative attitude to apply towards research and development of new technologies
• Excellent interpersonal and multi-tasking skills
• Excellent written and verbal communication skills
• Ability to work independently and in a team environment, including as a leader of small teams

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

PIC Test Manager – Photonics

Full-Time | Hybrid | $250K–$260K + Equity + Benefits

We are seeking an experienced PIC Test Manager with deep expertise in wafer-level optical and electrical testing for Photonic Integrated Circuits (PICs).

This role is responsible for leading the wafer-level test strategy across the full product lifecycle—from early silicon bring-up through high-volume manufacturing (HVM). You will oversee test architecture, yield optimization, and manufacturing readiness, partnering closely with design, process integration, foundry, and OSAT teams to successfully scale advanced photonic technologies into production.

Responsibilities

• Lead and define wafer-level PIC test strategy across multiple product lines through HVM
• Develop scalable, high-throughput optical and electrical wafer probing solutions
• Drive first-silicon bring-up activities, including defining test content, establishing limits, and conducting characterization
• Accelerate yield learning using parametric data analysis, wafer mapping, and statistical methodologies
• Guide PIC Design-for-Test (DFT) and PDK structure improvements to strengthen manufacturability and test scalability
• Establish and maintain golden wafer / golden die methodologies to support production stability
• Partner with foundries and OSAT providers to qualify wafer-level optical probe infrastructure
• Transfer mature, production-ready test flows into high-volume manufacturing environments
• Act as the primary technical escalation point for yield or manufacturing challenges
• Mentor senior engineers and define best practices for wafer-level test programs

Essential Candidate Profile

• 10+ years of experience in PIC test engineering, wafer-level probing, or photonics manufacturing test
• Proven ownership of wafer-level optical and electrical test from R&D through HVM
• Strong expertise in:
• Wafer-level optical probing
• Probe card qualification
• Yield learning and spatial data analytics
• Test time optimization
• Foundry collaboration and factory transfer
• Preferred experience contributing to PIC DFT strategy and working alongside PDK development teams
• Background in high-volume semiconductor or photonics manufacturing settings

Why You’ll Love Working With Us

• Competitive compensation: $250K–$260K + Equity + Comprehensive Benefits
• Significant technical ownership with direct influence on manufacturing outcomes
• Opportunity to define how next-generation PICs are tested and scaled for production

As a Director of AI-enabled Quality Systems, you will own the day-to-day execution and continuous improvement of SiPhox’s Quality Management System (QMS), supporting the development, validation, and production of regulated products from early prototypes through clinical and manufacturing stages. This is a hands-on, high-impact role in a fast-moving, multidisciplinary environment where quality must keep pace with innovation.

You will work closely with engineering, operations, and clinical teams to ensure that products, processes, and documentation meet internal requirements and applicable regulatory standards. Your focus will be on practical quality execution, ensuring verification and validation (V&V), design controls, and production systems are implemented effectively, issues are resolved efficiently, and results can be trusted.

In this role, you will serve as both a quality gatekeeper and a collaborative partner, helping teams build compliant processes without slowing progress. You will also play a key role in strengthening and scaling the QMS as the company grows, identifying opportunities to improve efficiency, clarity, and robustness across development and operations.

This role will have a high impact on SiPhox’s success, with significant potential for career development and growth as the company progresses through FDA submissions, manufacturing ramp up, and product launch.

Responsibilities

Quality System Leadership

• Serve as a senior owner and architect of the ISO 13485 Quality Management System (QMS), ensuring scalability, inspection readiness, and alignment with FDA (21 CFR 820 / QMSR), EU IVDR (if applicable), and other global requirements.
• Lead strategic evolution of document and record control processes, ensuring robust change control, traceability, and configuration management across design and manufacturing.
• Drive quality system maturity, ensuring processes are right-sized for a high-growth, fast-paced medical device environment.

Design Controls & Product Development

• Lead and oversee design control activities in accordance with 21 CFR 820.30 and ISO 13485, ensuring clear traceability from user needs through verification, validation, and risk management.
• Partner with engineering, assay development, software, and operations teams to embed quality into product development from concept through commercialization.
• Ensure Design History Files (DHFs), Device Master Records (DMRs), and technical documentation are complete, audit-ready, and submission-ready.

Regulatory Submission Support

• Lead quality strategy and documentation support for FDA submissions (510(k), De Novo, etc.), including substantial involvement in at least one cleared IVD submission.
• Ensure verification & validation documentation, risk files, and QMS elements meet regulatory expectations.
• Support responses to FDA questions, deficiency letters, and inspection observations.

CAPA & Continuous Improvement

• Own and elevate the CAPA system, ensuring robust investigations, root cause analysis (e.g., 5-Why, Fishbone, FMEA), and effective corrective actions.
• Analyze quality data trends to identify systemic risks and drive proactive improvement.
• Mentor cross-functional teams in structured problem-solving methodologies.

Risk Management

• Lead risk management activities in accordance with ISO 14971.
• Ensure risk controls are appropriately linked to design inputs, verification/validation, production controls, and post-market activities.
• Drive integration of risk management throughout the product lifecycle.

Audit & Inspection Readiness

• Lead internal audit programs and supplier quality audits.
• Serve as a primary quality representative during ISO 13485 audits and FDA inspections.
• Drive timely and effective responses to audit findings and regulatory observations.

Post-Market & Compliance

• Oversee complaint handling, adverse event reporting (e.g., MDR), and post-market surveillance processes.
• Ensure effective feedback loops between post-market data and design/process improvements.

Training & Culture

• Architect and maintain a scalable, role-based training system with measurable effectiveness.
• Promote a strong culture of quality, ownership, and compliance across the organization.

Required Qualifications

• 8+ years of experience in medical device quality within an ISO 13485 environment.
• 5+ years of experience in IVD development and/or manufacturing.
• Direct participation in one or more successful FDA 510(k) submissions for an IVD device.
• Deep working knowledge of:
• ISO 13485
• 21 CFR 820 (and QMSR transition awareness)
• ISO 14971
• Design controls for IVD systems (including assay and/or instrument development)
• Demonstrated experience leading CAPA investigations and cross-functional quality initiatives.
• Experience serving as a key quality representative during external audits or inspections.
• Bachelor’s degree in engineering, life sciences, or related field (advanced degree preferred).
• Authorized to work in the U.S. without sponsorship.

Highly Desirable Experience

• Experience with combination systems (instrument + consumable IVD).
• Experience in CLIA-regulated laboratory environments.
• Experience with software quality (IEC 62304 familiarity).
• Experience building or significantly scaling a QMS in a startup environment.
• Experience supporting international submissions (CE marking under IVDR).

Additional notes

SiPhox Health is creating an entirely new category of at-home technology that brings advanced biological measurement into everyday life. Our platform brings together silicon photonics, microfluidics, motion systems, sensing, thermal control, and embedded computing inside a compact device that performs complex biochemical analysis in minutes. We are building a consumer product that has never existed before. It integrates optics, chemistry, mechanics, biology and electronics into a seamless experience designed for millions of homes.

We offer competitive benefits, including a Life Time Fitness membership and the opportunity to work in a fast-paced, mission-driven environment building the future of home health.

Title:                         Program Manager – Precision Optics

Location:                  Rochester, NY

Company: EvolvOptic is a leading supplier of precision machined optical blanks. We are shaping the future together with our collaborators and customers. We are growing our capacity and capabilities for blank manufacturing. The same experienced team that made our company a respected leader in our field remains on the frontlines, keeping production humming and delivering an array of high-quality components. We are proud and honored to be a partner to our customers for their optical component needs providing best-value solutions to meet their priorities, including cost, schedule, and assured quality.

The forecast for the future is bright. We are expanding into large, complex optical components by pulling together the right team, the right technology, and the right methods to provide best-value solutions to ground-based and space-based imaging, semiconductor industry, and high energy optics, such as laser fusion and directed energy. 

Salary: $90K/yr - $120K/yr

Position Summary

The Program Manager is responsible for leading complex precision optics programs from initial pursuit through contract award program execution, and delivery. This role owns cost, schedule, and technical coordination across engineering, manufacturing, suppliers, and customers. In a small-business environment, the Program Manager is hands-on, highly cross-functional, and directly engaged in both strategic planning and day-to-day execution.

Key Responsibilities

• Own full program lifecycle for large precision optics projects.
• Serve as primary customer point of contact for program execution, milestones, and deliverables.
• Develop and manage program schedules, budgets, and risk registers.
• Coordinate cross-functional teams including opto-mechanical engineering, manufacturing, metrology, quality, and supply chain.
• Translate customer requirements into executable technical and manufacturing plans.
• Lead design reviews, technical interchange meetings (TIMs), and internal program reviews.
• Manage subcontractors and key suppliers for optical materials, coatings, fabrication, and testing.
• Track earned value, cost performance, and schedule performance; implement corrective actions as needed.
• Lead proposal development, cost estimating, and transition from proposal to execution.
• Ensure compliance with contractual, quality, and documentation requirements.
• Identify process improvements to increase efficiency, predictability, and scalability.

Required Qualifications

• Bachelor’s degree in engineering, Physics, or related technical field.
• 5+ years of program or project management experience in precision optics, photonics, aerospace, or advanced manufacturing.
• Working knowledge of optical fabrication, coating, metrology, and alignment processes.
• Experience managing schedules, budgets, and technical risk for high-value, low-volume programs.
• Strong customer-facing communication and negotiation skills.
• Ability to operate independently in a small, fast-paced organization.

Preferred Qualifications

• Master’s degree in engineering, Optics, or Business
• PMP or equivalent program management certification
• Experience with government or aerospace contracts
• Familiarity with ITAR, ISO 9001, or AS9100 environments
• Hands-on technical background in optics or opto-mechanical systems

Key Competencies

• Technical credibility with engineers and manufacturing teams
• Strong organizational and prioritization skills
• Clear, concise written and verbal communication
• Risk-driven decision making
• Adaptability and comfort with ambiguity

What We Offer

• Opportunity to lead cutting-edge optics programs with direct customer impact
• High visibility and influence in a growing small business
• Collaborative, technically driven culture
• Competitive compensation and benefits

This position is subject to US export control laws, including the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which require US person status. A “US person” is defined by these regulations as a US citizen, US lawful permanent resident (i.e., “green card holder”), political asylee, or refugee.

All employees must also be legally authorized to work in the United States. Verification of employment eligibility will be required consistent with federal law (Form I-9). Export control assessments are conducted separately to ensure compliance with ITAR/EAR.

EvolvOptic is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic protected by state or federal law.

xLight is seeking a Director of Procurement to lead and scale our sourcing, supplier management, and procurement operations. This hybrid role requires close collaboration with engineering, manufacturing, and program teams and periodic on-site engagement to support supplier qualification, integration, and production readiness.

This position is ideal for a procurement leader experienced in highly technical, government-adjacent, or capital-intensive environments.

Key Responsibilities

• Define and execute procurement strategy supporting R&D, pilot production, and manufacturing scale-up
• Lead sourcing, supplier selection, negotiations, and long-term agreements for complex, engineered components and subsystems
• Manage supplier risk, including single-source dependencies, capacity constraints, and long-lead items
• Partner with engineering on should-cost modeling, make/buy decisions, and value engineering initiatives
• Establish procurement processes, controls, KPIs, and governance appropriate for a rapidly scaling technology company
• Build, mentor, and lead a high-performing procurement and supply chain team
• Collaborate cross-functionally with Engineering, Manufacturing, Quality, Finance, and Program Management
• Support compliance with contractual, regulatory, and export-control requirements
• Interface with government-funded program requirements as applicable

Required Qualifications

• Bachelor’s degree in Engineering, Supply Chain, Business, or a related discipline (Master’s preferred)
• 10+ years of progressive procurement or supply chain leadership experience
• Proven experience sourcing complex electromechanical, optical, vacuum, plasma, or precision-manufactured systems
• Strong contract negotiation skills with high-value, long-lead suppliers
• Experience operating in fast-paced, technically complex environments
• Familiarity with ERP/MRP systems and structured procurement processes

Preferred Qualifications

• Experience in semiconductor capital equipment, aerospace, defense, photonics, or advanced energy systems
• Background supporting DOE, NNSA, DOD programs, national laboratories, or federally funded R&D initiatives
• Experience in startup, scale-up, or first-of-a-kind manufacturing environments
• Understanding of government compliance, reporting, and audit considerations

Additional Information

• This is a full-time appointment.
• xLight offers a comprehensive compensation and benefits package with stock options, holidays, paid time off, medical, dental, vision, and life insurance and 401(k) retirement plan with company matching.
• In compliance with federal and state equal employment opportunity laws, qualified applicants are considered for all positions at xLight without regard to race, color, religion, sex, national origin, age, marital status, veteran status, disability, sexual orientation, or gender identity or any other basis protected by applicable federal, state, or local law.
• This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.
• To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions, absent undue hardship.
• Send resume and optional cover letter to

Equal Opportunity Statement

xLight Inc. is an Equal Opportunity Employer. Our policy is clear: there shall be no discrimination on the basis of age, disability, sex, race, religion or belief, gender reassignment, marriage/civil partnership, pregnancy/maternity, or sexual orientation. We are an inclusive organization and actively promote equality of opportunity for all with the right mix of talent, skills and potential. We welcome all applications from a wide range of candidates. Selection for roles will be based on individual merit alone.

We are hiring Senior Project Manager - Supply Chain to join our Digital Engineering team.

Who are we?

For the past 20 years, we have powered many Digital Experiences for the Fortune 500. Since 1999, we have grown from a few people to more than 4000 team members across the globe that are engaged in various Digital Modernization.

Job Title: Senior Project Manager - Supply Chain

Location: Dallas, TX

Job Type: Fulltime or Contract

Job Summary

We are looking for a Senior Project Manager for Technology team who can drive multiple medium to large cross-functional Projects involving eCommerce and Order management Integrations. Prior experience in driving projects related to customer promise, omni channel customer experience, order sourcing and fulfillment projects, merchandizing projects. Understands landscape and systems with significant complexity and clear approach to deliver with a wide variety of systems/ technologies; He/she also partners with Delivery and Product leaders to navigate through program execution. The Senior Project Manager in this role is self-driven, quick learner, shows strong sense of partnership and program delivery.

What will you do?

• Produces meaningful Project/Program plan with clear milestones and deliverables across multiple cross-domain teams. Wholistic program plan including dependencies, risks and other factors impeding the successful execution of the program.
• Produces Program Forecast on-time, tracks to Forecast and raises alerts on-time before financial overages occur.
• Can engage right leaders at the right time to resolve issues in the Project/ Program.
• Can articulate issues clearly, point which delivery / product leader support is needed to keep project on track when issues arise.
• Can deal with ambiguity and still be able to time-box decisions, keep relevant leaders accountable to make program decisions on time.
• Can articulate schedule/ cost impacts when delays happen in the project/ program. works with leaders on alternate solutions to keep project on track.
• Establishes a clear escalation mechanism for the program and uses it when necessary.
• Depicts strength in Program management and produces for pre and post implementation plans as well.
• Manages stakeholder expectations includes business interactions, as necessary.
• Independently drives the program work and is hands-on. May not have PMs supporting in the program based on the size of the program.
• Orients, orchestrates, and recommends Program strategy.
• Exercises strong judgment in selecting methods, techniques, and evaluation criteria for obtaining results
• Use established project management methodologies/tools and work with the project team to successfully manage complex scopes of work(s), which include – defining work effort and estimates, developing effective team execution plan(s), supporting teamwork effort by removing impediments, anticipating issues, and ensuring that the right parties are engaged to resolve problems.
• Perform financial management of the project: budgeting & forecasting, cost benefit analysis, EV/ROI/earn vs. burn analysis, team velocity, etc. Own project budget. Expected to anticipate budget issues, resolve timely, and adjust forecasts.
• Plan, monitor, and track delivery of quality control and take corrective action as appropriate.
• Develop project quality control policy, procedures, and communication plans.
• Produces meaningful status reports, clearly articulation the overall health of the program w.r.t Scope, Schedule, and Cost. Can clearly define issues, their owners, and ETAs by when resolution/ decisions need to happen to keep project green.
• Communicate project information to all project team members, sponsors, vendors, and Technology managers, as appropriate.
• Can interact with third party vendors and partner with VMO, Delivery, Product leaders to define Statements of Work (SOW) and engage the third-party vendors on-time for successful on-time deliveries.
• Anticipate strategic impact to projects (inter dependencies to/from other projects) and coordinate with appropriate parties.
• Recommend project strategy. Clearly articulate explanations of complex regulatory and project issues/risks to team members and management within the organization.
• Establish, motivate, and lead high-performance cross-functional teams.
• Build effective partnerships with, and between, the developers, architects, QA Team and product managers, and across the company.
• Coordinate with potential product vendors to collect and analyze information and negotiate resolution of issues impacting projects.
• Ability to perform in a Hybrid model with agile teams, non-agile third-party teams with SOWs and establishing a clear milestone, dependencies and tasks for each team.

What are we looking for?

• Prior experience handling multiple mid-sized cross-functional projects preferably in the Retail Industry.
• Should have experience in working with multiple cross domain teams such as eCommerce, Order Management, Merchandising and any Third-Party Integrations with SOWs.
• 10+ years relevant work experience in Program Management
• Experience integrating systems on multi-platform and complex systems.
• Can provide evidence or can clearly articulate their approach of producing a cross functional Program Plan spanning multiple functional teams.
• Strong hands-on experience in driving deliverables across multiple teams with shared accountability with the resource managers.
• In depth understanding and proficiency of project management methodology/tools, including Jira for Software Development Life Cycle
• Prior experience in working with Microsoft Project tools, Jira, Confluence, Smart sheets etc.
• Prior experience in producing Jira Dashboard to track and report on progress.
• Proven ability in project estimating, budgeting tools, story development, technical concepts, and defect tracking.
• Strong communication, team collaboration, facilitation, and influence skills
• Strong drive towards planning and executing with a plan in place; you're a can-do type of person and willing to roll up your sleeves to get the job done.
• Bachelor’s or Master’s degree or equivalent work experience.

About Us

At Dimer Instruments, we are developing the next-generation laboratory and process analytical tools for the pharmaceutical industry. Our products use multiple light-based spectroscopic methods to analyze solutions containing molecules and particles. This provides researchers with organized information, enabling them to make informed decisions. Additionally, our products provide automated process systems with the feedback needed for Quality-by-Design (QbD). At Dimer, you will work with a talented and collaborative team of engineers and scientists to create impactful products. We have fun while creating great products.

Summary

As an Optics Technician, you will assemble optical beams and optical assemblies, perform optical alignment, calibration and verification testing for optical subassemblies and finished instruments in accordance with manufacturing documentation (assembly instructions, process documents, etc.) using a variety of hand tools, measuring devices and test equipment.

Essential Duties and Responsibilities

• Own the production queue across optical subassembly build, alignment, end-of-line verification, and documentation review.
• Assemble optical beams and assemblies (per drawings, job travelers, and work instructions (WIs).
• Install and align optical components to meet acceptance criteria using alignment fixtures and optical test equipment (e.g., power meters, microscopes) and documented procedures
• Execute instrument calibration at build and test stations; perform re-alignment of optic assemblies if required.
• Evaluate data vs. acceptance criteria and flag out-of-spec results; partner with engineering on troubleshooting, root-cause analysis, and corrective actions (rework plans, containment, prevention).
• Review and sign off on manufacturing records, job travelers, and alignment logs; ensure objective evidence is complete and traceable.
• Own cleaning and preventive maintenance routines for optical benches/test fixtures and production equipment to maintain repeatability and throughput.
• Partner with operations and engineers to improve WIs and visual standards (fixtures, checklists, go/no-go criteria, data review templates) to drive yield and reduce variation.
• Operate under ISO9001 expectations and support audits by providing objective evidence and clear traceability.
• Other duties as assigned.

Qualifications

• Experience: Minimum 2 years in optics/photonics assembly, precision instrumentation production, Electronics or related industry
• Education: High school diploma or equivalent required. AA/AS or BS in Optics/Photonics/Engineering Technology or related technical discipline strongly preferred.
• Experience using standard hand tools - allen wrenches, screw drivers, cutters, etc.
• Familiarity with computers as applicable to manufacturing
• Experience with standard Microsoft office tools; Python experience a plus.
• Possess a quality minded work ethic and strong attention to detail
• Interface in a collaborative manner to foster effective and inspiring group dynamics
• Ability to stand for extended periods, often for most of the workday
• Requires good manual dexterity and the ability to use hands and arms to hold, control, or feel objects, with tasks like soldering, crimping, and fabricating parts

Physical Requirements

When working in the machine shop, chemistry lab, or optics lab, appropriate protective gear must be worn, including safety glasses, laser/UV eye protection, lab coats, and closed-toed shoes. Role requires fine motor skills for handling small components and the ability to work at a bench/test station for extended periods (sit and/or standing). Capable of lifting, pushing, pulling, or carrying objects, often up to 50 pounds, though the frequency of lifting heavier objects varies

Work Environment

Office space, optics lab, chemistry lab, warehouse, and electronics/optical manufacturing areas. The employee may occasionally be exposed to moderate noise levels (e.g., loud fans in electronics equipment). Occasional travel may be required (e.g., test labs, customer sites, conferences and trade shows, or training).

Who are we?

For the past 20 years, we have powered many Digital Experiences for the Fortune 500. Since 1999, we have grown from a few people to more than 4000 team members across the globe that are engaged in various Digital Modernization. Our current focus and innovation in Digital Hyper expansion TM offers nearly limitless opportunities for career growth. For a brief 1-minute video about us, you can check out is an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We bring out the best in each other.

We are seeking a UI-heavy UI/UX Designer with a strong focus on digital experiences.

This role will emphasize visual design, branding integration, and UI execution, while maintaining UX fundamentals.

Key Responsibilities

• Design high-quality, visually compelling digital interfaces aligned with brand standards
• Translate marketing strategies into engaging user experiences
• Create UI designs for digital flows (campaigns, landing pages)
• Apply and extend existing design systems while supporting branding integration initiatives
• Collaborate with:
• Creative Directors
• Marketing stakeholders
• Product and development teams
• Produce wireframes, high-fidelity mockups, and interactive prototypes
• Present design rationale clearly to stakeholders
• Incorporate feedback quickly in fast-paced marketing cycles

Required Skills & Experience

• 7+ years of UI/UX design experience
• Strong portfolio showcasing:
• Visual/UI excellence
• Marketing or acquisition-driven work
• Brand-forward digital experiences
• Advanced proficiency in Figma
• Experience working within established design systems
• Strong visual design fundamentals (layout, typography, color, hierarchy)
• Experience collaborating with branding and marketing teams
• Ability to elevate UI while maintaining usability standards
• Basic understanding of user flows and journey mapping
• Basic information architecture principles