Permatherm Panels Jobs in Usa

Lead Security Technician

Location: Charleston, SC

Schedule: Full-time (typical construction hours; may vary by project)

Position Overview

We are seeking an experienced Lead Security Technician to support commercial security system installations across projects in the Charleston, SC area. This is a hands-on leadership role responsible for overseeing field crews, ensuring high-quality installations, and coordinating with project stakeholders to deliver successful security system deployments.

The ideal candidate brings strong experience in access control, CCTV, intrusion systems, door hardware, and structured cabling, along with the ability to lead teams and maintain professional jobsite standards.

Key Responsibilities

Field Leadership

• Lead and supervise installation teams on active job sites
• Assign daily tasks and ensure productivity and quality standards are met
• Serve as the primary point of contact between field teams and project leadership
• Maintain jobsite organization, safety compliance, and workflow efficiency

Security System Installation

• Install, terminate, and troubleshoot:
• Access control systems
• CCTV / IP camera systems
• Intrusion detection systems
• Install and wire door hardware including:
• Electric strikes
• Maglocks
• Door contacts
• Request-to-exit (REX) devices
• Card readers and keypads

Cabling & Infrastructure

• Pull, route, terminate, and test:
• Cat5e / Cat6 / Cat6A
• Composite access control cable
• Coax and low-voltage cabling
• Perform clean cable dressing, labeling, and pathway management
• Build and wire panels, enclosures, and head-end equipment

System Integration & Testing

• Assist with panel terminations and device integrations
• Support system testing, commissioning, and troubleshooting
• Ensure all installations meet project specifications and code requirements

Documentation & Communication

• Read and interpret blueprints, riser diagrams, and scopes of work
• Provide daily progress updates to project managers or supervisors
• Track materials, report issues, and coordinate solutions in real time

Required Experience

• 5+ years of experience in low-voltage / security system installation
• Proven leadership experience as a Lead Technician or Foreman
• Strong background in:
• Access control systems
• CCTV / surveillance systems
• Structured cabling and terminations
• Door hardware installation

Preferred System & Brand Experience

Experience with one or more of the following platforms is highly preferred:

• Access Control: Lenel, LenelS2, Software House (CCURE), Genetec, Avigilon, Brivo, AMAG, Honeywell, Openpath
• CCTV / VMS: Avigilon, Genetec, Milestone, Hanwha (Wisenet), Axis
• Intrusion Systems: Bosch, Honeywell, DSC, DMP

Technical Skills

• Strong understanding of low-voltage wiring and system architecture
• Experience with panel wiring and device integration
• Ability to troubleshoot systems independently
• Proficient in reading prints and executing scopes with precision

Requirements

• Valid driver’s license and reliable transportation
• Ability to pass background check (required for secured sites)
• OSHA 10 (preferred but not required)
• Ability to lift 50+ lbs, climb ladders, and work in construction environments

Tools & PPE

• Must have own basic hand tools (termination tools, drills, testers, etc.)

Position Objective: Run the line efficiently and safely with the maximum amount of production and a minimal amount of off-quality. Inspect the product for quality.

Essential Duties:

• Set up equipment for different products.
• Achieve set quality standards.
• Monitor parameters such as temperature, pressure, and time.
• Overall visual control of the entire line.
• Visual inspections of products for defects and grading.
• Complete computerized quality reports.
• Physical testing on finished products.
• Make machine/process adjustments on line and on computer.
• Follow specific instructions on each order.
• Perform quality checks on finished products.
• Keep machines and work areas clean and free of dust.
• Break for other positions as needed.
• Other duties as requested by Lead or Supervisor.
• Willing to be an On the Job Trainer (OJT)
• Able to troubleshoot mechanical and quality problems.
• Locate pallets of material in the shop floor system and issue to line.
• Perform manual testing of press after PM's, to include running dry board through each press if needed.
• Perform visual inspection of each press panels
• Use a flashlight to look for defects such as seam lines or any other defect that could be occurring.
• Record results in the \"Comments\" section of the \"Chisel Test\" tab located on the shared drive under the Pressing Technician Checks database.
• Replace belts or any repairs needed to correct and report defects and repairs to the Lead and in Database.

Non-Essential Duties:

• Must be a team player.
• Take an active role in committees.
• Must have the ability to be cross trained for other jobs on the pressing line.

Physical Requirements:

• Must be able to bend, squat, and stoop several times a day.
• Must be able to stand for 8 12 hours a day.
• Must be able to climb stairs several times through the day.
• Must be able to assist in lifting up to 75 lbs. several times a day.
• Must be able to lift 35-50 lbs. on a regular basis throughout the day.
• Must be able to handle the stress of meeting goals and production requirements.
• Must be able to visualize defects in the product.
• Must be able to visualize color defects in the product.

Other Requirements:

• Basic reading, writing, and math ability.
• Must be able to operate a lift truck once trained.
• Must be capable of learning and performing additional operations.
• Must be capable of being trained on current computer systems and software.

Training Requirements:

• On the job training
• Must have all OSHA, SAFE, SMS, and plant specific training.
• Lift Truck training

Tool, Equipment, & Material Requirements:

• Safety Glasses
• PPE listed on JHA

Safety & Security Requirements:

• Must comply with all required OSHA, SAFE, and plant specific safety rules and regulations.
• Refer to the Plant JHA (Job Hazard Analysis) for this job for the prevention of accidents.
• When placing the ticket on the bundle, put the ticket no more than 5 panels down.
• Must put glue machine control panel in manual before pushing out glue machine
• Use a wagon to transport full five-gallon buckets. Only sixteen (16) buckets should be stored on the glue waste station.

Work Shift: 12 Hr rotating shift, Hrs fall to in punch day, Act Calendar, shift starts PM, days change only

Shaw Industries is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.

• 
  
• Assembling and wiring completely aircraft electrical, radio, and radar units such as main junction and terminal boxes, main engine disconnect plug, main control, switch panels, radio panels, and instrument panels
  
• Completing hookup of wiring, flexes, and cables, and troubleshooting electrical and radio assemblies having multiple interconnected units and accessories
  
• Forming and running harnesses, breaking out and terminating wiring to terminal points where wire routing and location of electrical units and accessories are established by jig board layouts
  
• Making continuity checks (including necessary operation) of above assemblies and harnesses as required, and selling same to inspection
  
• Fabricating completely hi-voltage radio and radar cables that require the soldering of multiple wires, shields, tubes, connectors, pins, washers, spacers, and cores
  

KR SOLAR is seeking skilled and experienced Solar Installers to join our team. As a Solar Installer, you will be responsible for the installation and maintenance of solar energy systems for residential and commercial properties. You will work closely with our customers and other team members to ensure the safe and efficient installation of solar panels, inverters, and related equipment.

At KR SOLAR, we are committed to providing high-quality and reliable solar solutions to our customers. Our goal is to help them reduce their energy costs and make a positive impact on the environment. Join us and be part of a team that is at the forefront of the renewable energy industry, shaping the way we generate and consume electricity.

• Install solar panels, inverters, and other solar energy system components
• Evaluate site conditions and determine the best placement for solar panels
• Work safely and follow industry standards and guidelines
• Conduct electrical work, including wiring and connecting solar system components
• Perform routine maintenance and troubleshooting of solar energy systems
• Collaborate with team members to ensure timely and accurate project completion
• Provide exceptional customer service and address any customer concerns or questions

• Assemble sheet metal components, mechanical sub-assemblies, motors, and blowers according to work instructions and engineering specifications.

• Install completed assemblies and sub-assemblies into units, ensuring proper alignment, fit, and function.

• Insert and secure insulation materials into metal panels following safety and quality standards.

• Use hand tools, power tools, and production equipment to perform assembly operations accurately and efficiently.

• Read and interpret blueprints, diagrams, work orders, and production schedules to determine assembly requirements.

• Perform quality checks to ensure assemblies meet established standards and resolve basic assembly issues as they arise.

• Maintain a clean, organized, and safe work area while following all safety policies and procedures.

• Communicate any material shortages, equipment issues, or process concerns to supervisors promptly.

• Support continuous improvement efforts by identifying opportunities to enhance quality, efficiency, and safety.

• Follow all standard operating procedures (SOPs) and production guidelines.

• Perform other duties as required.

• High school diploma or equivalent preferred.

• Prior manufacturing or assembly experience preferred but not required.

• Ability to read and interpret basic blueprints, diagrams, and work instructions.

• Familiarity with hand tools, power tools, and basic mechanical assembly practices.

• Strong attention to detail with the ability to perform tasks accurately and consistently.

• Ability to stand, lift, bend, and perform repetitive tasks for extended periods.

• Demonstrated ability to work both independently and as part of a team.

• Good communication skills and willingness to ask questions and seek guidance when needed.

• Ability to work in a fast-paced environment and meet production deadlines.

• Basic understanding of safety procedures and commitment to safe work practices.

• Experience in a manufacturing environment involving sheet metal, mechanical assembly, or HVAC components.

• Ability to operate basic production equipment or machinery.

• Experience working with insulated panels, motors, or blower assemblies.

• Knowledge of lean manufacturing or continuous improvement principles.

• Forklift or pallet jack experience (if applicable to the facility).

• Travel is not required for this role

• Customer Focus

• Operational Excellence

• High-Performance Culture

• Innovation

• Financial Strength

• Own It

• Act With Urgency

• Foster a Customer-First Mindset

• Think Big and Execute

• Lead by Example

• Drive Continuous Improvement

• Learn and Seek Out Development

• Promote Transparent & Open Communication

Insight Global is seeking an experienced EPLAN Electrical Designer to support the development of its large-scale metal additive manufacturing platform, the Advanced Test Demonstrator (ATD).

In this role, you will play a critical part in electrical documentation, panel fabrication support, and system integration activities for a complex LPBF (laser powder bed fusion) 3D printer environment. This includes creating and updating EPLAN schematics, supporting hands-on panel builds, documenting wiring and fluid routing, and collaborating with cross-functional engineering teams (controls, mechanical, and R&D).

The ideal candidate is highly experienced in mixed-voltage electrical systems, industrial standards, and shop-floor integration. This is a hands-on role requiring strong troubleshooting, fabrication support, and comfort working around high-power distribution and sensitive signal environments. While not required, experience with LabVIEW OOP and industrial additive manufacturing systems is highly advantageous.

Qualifications

Required Skills & Experience

• 10+ years of electrical design experience
• Proficiency with EPLAN Electric P8 for electrical schematics, wiring diagrams, harness documentation, and connector pinouts
• Experience supporting panel fabrication and providing real-time troubleshooting for mixed-voltage enclosures
• Experience updating as-built documentation from shop-floor redlines
• Strong knowledge of industrial electrical standards (UL, CE, NEC, NFPA)
• Strong wiring, layout, and enclosure integration skills for R&D or industrial machine environments

Nice to Have Skills & Experience

• Experience with EPLAN Fluid for documenting chiller loops, pneumatics, and gas routing
• LabVIEW OOP experience
• Background in additive manufacturing, large industrial printers, or automation equipment
• Familiarity with pneumatic manifolds, argon systems, or fluid-cooled industrial machinery
• Experience coordinating electrical requirements within CAD enclosure models
• Comfortable working on shop floors with high-power distribution and sensitive signal routing

PrideNow is seeking an experienced Maintenance Electrician to join our team in a full-time, direct hire role. This position requires a highly skilled professional capable of performing complex industrial electrical maintenance in a manufacturing environment. Candidates with journeyman-level experience or 7–10 years of industrial electrical experience are strongly encouraged to apply.

Shifts Available:

• 2nd Shift: Monday–Friday, 2:00 PM–10:00 PM
• Pay Rate: $34.25/hr. plus $1 shift differential for 2nd shift
• Comprehensive benefits package to include Medical, Vision, Dental, PTO, 401k + Match, FSA etc.

Job Responsibilities:

• Identify electrical hazards and safely isolate, ground, and prepare circuits and equipment for repair.
• Use required PPE to protect against arc flash and electrical shock.
• Read, interpret, and troubleshoot from blueprints and schematics, including 240V and 480V three-phase systems.
• Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high-voltage switchgear, protective relays, and related equipment.
• Install, calibrate, and maintain electrical apparatus using engineering drawings and manuals.
• Install conduit, pull wiring, and perform proper terminations.
• Use electrical and electronic testing equipment such as multimeters, ammeters, megohm meters, high-potential testers, oscilloscopes, and digital probes.
• Install and maintain electrical distribution and control equipment including switches, relays, circuit breakers, and panels.
• Install and maintain drive systems including VFDs, eddy current drives, and DC drive systems.
• Perform installation, maintenance, and troubleshooting of PLC systems, including point-to-point wiring and equipment replacement.
• Install and calibrate pressure, temperature, flow, and level control devices.
• Observe operating systems to detect hazards and determine need for adjustments or modifications.
• Design and lay out control panels, set up complex control systems, and modify engineering drawings when required.
• Repair or replace faulty electrical equipment, including electronic controls, motors, meters, outlets, and panels.
• Document work performed and communicate issues, irregularities, and ongoing needs to the team.
• Maintain a safe and clean work environment following all procedures and regulations.
• Communicate effectively to resolve electrical problems.
• Assist in training line mechanics and apprentices as needed.
• Use the computerized maintenance management system (CMMS) to enter and retrieve information.
• Follow safe work practices at all times and ensure work does not endanger others.
• Perform additional duties as needed.

Additional Requirement:

• Physical examination is required.
• Must be able to train on 1st shift for 1-2 weeks if needed
• Journeyman or electrical license preferred or 5+ years of experience as an electrician in a manufacturing plant

#SM

Job Summary

We are seeking an experienced Pre-Press Graphics Designer to join our fast-paced wide format production team. This is a high-volume, on-site position that requires strong technical expertise in preparing files for vehicle wraps, wall wraps, signage, banners, and sticker production.

The ideal candidate must have hands-on experience with wide format pre-press workflows—especially vehicle wrap setup—and be proficient in Adobe Illustrator. Experience operating and maintaining roll-to-roll printers is also required. This job will be mainly focused in file set-up, rather than design.

Key Responsibilities

• Set up and prepare print-ready files for:
• Full and partial vehicle wraps
• Wall wraps with accurate paneling and bleed
• Signage and large-format banners
• Sticker and decal production
• Create precise panel layouts for vehicle and wall installations, including proper bleed and overlap
• Ensure correct scaling, resolution, and file formatting for large-format output
• Preflight incoming artwork and resolve technical file issues
• Manage color profiles and maintain print consistency
• Operate, monitor, and maintain roll-to-roll wide format printers
• Perform routine printer maintenance and basic troubleshooting
• Work closely with production and installation teams to ensure accuracy and efficiency
• Maintain quality control standards in a fast-paced environment

Required Qualifications

• Proven experience in wide format pre-press production
• Strong experience setting up files for vehicle wraps (required)
• Proficiency in Adobe Illustrator (required)
• Experience with paneling large wall wraps and vehicle graphics
• Solid understanding of bleed, overlap, scaling, and installation-ready layouts
• Experience operating and maintaining roll-to-roll printers
• Strong attention to detail and ability to work efficiently under deadlines
• Ability to work on-site in a high-paced production environment

Preferred Qualifications

• Experience with RIP software (Onyx, Caldera, or similar)
• Knowledge of color calibration and color management workflows
• Experience in high-volume print environments
• Familiarity with laminating and finishing processes
• Experience collaborating directly with installers

What We Offer

• Competitive pay (based on experience)
• Full-time, stable position
• Fast-paced, team-oriented work environment
• Opportunity to work on large-scale and creative projects

Job Title : Engineering, Design, R&D - Sensory Lab Testing Technician

Location : Burlington, MA 01803

Duration : 12 Months

Shift Details : On-Site

Job Description :

• Support daily operations of the R&D sensory lab and assist with sensory testing activities.
• Maintain lab organization, including monitoring supplies, maintaining equipment, and ensuring cleanliness.
• Assist sensory scientists in setting up and executing sensory tests (discrimination, descriptive panels, shelf-life, and packaging usability testing).
• Prepare and manage panel materials, including product labeling, sample preparation, storage, and serving samples.
• Coordinate panel schedules and operate laptops, data collection software, and coffee brewers for testing.
• Manage incoming and outgoing sensory product shipments while maintaining accurate records and organization.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.

As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes. Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines. Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly. You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks. Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance. Please note that this role involves working in tight spaces, including entering the wing through a 9.5”X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.

• Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.

• Install ventilation equipment as required to ensure proper airflow in the work cavity.

• Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.

• Clean and adjust sealing equipment to ensure proper functionality.

• Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.

• Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.

• Apply wing station identification numbers on tank doors using stencils and spray paint as required.

• Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.

• Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.

• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.

• Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.

• Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.

• Position tools for locating vortex generators and apply faying surface seals as needed.

• Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.  

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

• Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Respirator trained

• Completed 1+ year of aerospace training in high school or community and technology college

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility. 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.