Pec Registered Engineer Benefits Jobs in Usa

General Description: We are seeking a Sr. Electrical Engineer (PE Required) for our Chadds Ford or Philadelphia office! The Senior Electrical Engineer shall be engaged in projects involving, but not limited to, the design of facility related electrical distribution systems, interior and exterior lighting, low voltage systems (security, communications, data systems), and emergency backup systems. They will participate in and support project teams to undertake the design and delivery of services related to design and construction of electrical systems, as well as the overall project. This position shall be responsible to Project Manager(s) and the local Operations Manager.

Essential Functions:

• Functions as Project Manager, Lead Electrical Engineer, and/or Senior Electrical Engineer on a variety of assignments with electrical design scope and other disciplines. Role may vary based on size, complexity, and location of the projects.
• Ensures coordinated design on projects.
• Participates in the design development of electrical work.
• Creates and reviews drawings, technical specifications.
• Contributes to estimation of projects, planning and construction feasibility.
• Participates in the development of design drawings.
• Able to provide advisory information during the construction phase.
• Able to perform site surveys and contributes to engineering studies.
• Attends and contributes to office, client and project meetings.
• Participates in the monitoring of project production and schedules to ensure projects are completed on schedule and within budget.
• Participates and ensures the quality of the work produced maintains high standards.
• Performs engineering studies.
• Performs technical and coordination check-review of project documentation and drawings.
• Follows up on issues with design and production staff to resolve problems and concerns.
• Participates in internal project meetings on a regular basis, including being responsible for minutes.

Secondary Functions:

• Related duties as assigned.
• Supports applicable requests as needed.
• Lends support to all business areas outside of electrical focus as needed.
• Duties as assigned by Operations Manager or Regional Director.

Qualifications

Education/Experience Minimum:

Bachelor's degree in Electrical Engineering. PE Required. Minimum of eight (8) to ten (10) years' experience in a technical and management capacity reflecting increasing responsibility.

• Ability to drive and maintain a safe driving record.
• Valid state driver's license (any in US).
• In possession of appropriate paperwork to gain and maintain employment in the US.
• Ability to pass pre-hire drug testing and background check(s).
• Ability to meet worksite security requirements including FBI and State Police criminal background checks and DHS threat assessment evaluations.

Needed Skills:

• Proficient in project/task management.
• Ability to create and maintain productive relationships with employees, clients, and vendors.
• Understanding of principals of A/E industry.
• Strong knowledge of National Electrical Code (NEC), NFPA Life Safety Codes, and applicable local building codes.
• Working experience with software: Revit and AutoCAD, Visual, GenSize and SKM Power Tools.
• Good communication and negotiations skills.
• Good leadership skills.
• Ability to multi-task.
• Ability to prioritize tasks.
• Detail and safety-oriented.
• Excellent written and spoken English.

Collins is an ENR Top 500 Design Firm. We have opportunities for you.

Collins is seeking a highly motivated and experienced Senior Roadway Design Engineer to join our growing Civil Group in our Chicago, Illinois, office. This is a unique opportunity to play a key role in diverse and exciting roadway/transportation engineering projects. Ideal candidates will have 10 years of progressive experience in the design and development of roadway projects, with a strong understanding of IDOT, Illinois Tollway, and local agency standards. Open Roads Modeling and Drainage design experience preferred.

Typical Duties and Responsibilities:

• Lead and manage a variety of roadway/transportation engineering projects from concept to completion.
• Ensure projects meet technical specifications, regulatory requirements, and client expectations.
• Collaborate with multidisciplinary teams to deliver innovative and effective solutions.
• Prepare and review project plans, specifications, and cost estimates.
• Mentor and provide guidance to junior engineers.
• Adopts and implements in-house QA/QC program.
• Is active in technical societies.

Education and/or Experience:

• Bachelor's degree and/or master’s degree in engineering from an accredited four-year university.
• Minimum of 10 years’ experience or the equivalent thereof.
• Strong understanding of IDOT, Illinois Tollway, and local agency standards.
• Proficiency in engineering design software. Microstation/OpenRoads is preferred.
• Professional Engineer (P.E.) license required.

Nuclear Design Engineer

with significant focus on nuclear pressure transmitter products.

Work Location: Round Rock, TX

Rate: Not Defined / need Candidate’s requested rate

Per diem: $178.00/day (7 days per week)

Mob / Demob: $500.00/each way

Hours: Full Time (40 hrs / wk)

The required qualifications are as follows:

Position Details: Design, development, and support of sensor products with significant focus on nuclear pressure transmitter products.

Purpose of Position:

This position will be responsible for the design, development and support of sensor products with significant focus on nuclear pressure transmitter products. This includes design engineering, AutoCAD, SolidWorks 3D modeling, drawing creation, component specification and supplier qualification, environmental analysis, qualification testing, sustaining engineering, manufacturing support and project management.

Key Responsibilities:

• Complete assigned projects in accordance with requirements and within schedule and budget limitations
• Domain knowledge application is typically 80% Mechanical Engineering and Manufacturing Process; 20% Electrical,
• Quality, Materials
• Research and development of pressure sensor elements and components
• Product design, analysis, and documentation
• Specification reviews and configuration management
• Project management
• Create and maintain inspection, manufacturing, and testing procedures
• Production work orders and work instructions
• Sustaining engineering
• Maintaining supply of qualified components
• ‘Pre-emptive’ management of risks
• Design Reviews and problem solving
• Product Verification & Validation and acceptance
• Product and component qualification testing
• Support manufacturing during production and testing
• Interact with: Customers, Suppliers, Engineers, Operations and Materials, Quality Assurance, Management at all levels
• Other duties as assigned

Required:

• BSME from an ABET accredited University; or, equivalent Engineering degree in adjacent discipline (e.g. Electrical,
• Aerospace, Nuclear, Materials) with requisite design skills and experience
• Five (5) or more years of engineering experience including pressure sensors and transmitters
• Experience with pressure transmitter calibration, bench testing, component level troubleshooting, root cause analysis
• Working knowledge of manufacturing processes
• Design for Manufacturability (DFM)
• GD&T per ASME Y14.5M
• Experience and ability to work in a regulated industry
• Good verbal and written communication including technical writing (English)
• SolidWorks, AutoCAD or similar MCAD, MS Office

Considered a plus:

• Expertise in pressure sensor technologies
• Experience in Aerospace, Military, Nuclear, or Environmental Qualifications
• Familiarity with IEEE 323 & 344 and RCC standards, ASME Codes, and nuclear quality standards
• Solid modeling and Finite Element Analysis (FEA)
• Experience in computer integrated manufacturing CAD/CAM/CMM
• Programming in Excel, Visual Basic, MATLAB, LabVIEW

Physical Requirements: Must be capable of climbing, walking, kneeling, bending, and lifting as part of daily job responsibilities. Ability to lift a minimum of 35 – 60 lbs.

Stevens Engineers & Constructors has an excellent opportunity for an experienced and highly motivated Project Engineer/Piping Drafter to join our Cleveland Operations Team. The ideal candidate will have project engineering and drafting experience in heavy industrial markets such as steel, aerospace, or chemical processing disciplines for the purpose of coordinating all technical activities for assigned projects. The Project Engineer/Piping Drafter role blends technical drafting with project coordination to ensure piping systems are accurately designed, fabricated, and installed. While a Piping Drafter focuses on creating technical drawings, a Project Engineer oversees the technical and management aspects of the project, including schedules and client coordination.

The ideal candidate will also have a client-focused approach and will work well independently and as part of the project team.

Stevens offers a competitive salary commensurate with experience, along with an excellent benefit package. This is a perfect career opportunity to join an experienced group of professionals that are committed to providing our customers quality project results.

Essential Duties and Responsibilities

Create detailed 2D piping plans, sections, and isometrics using software like AutoCAD.

Develop and update piping & instrumentation diagrams and line lists.

Build CAD models for equipment and new piping systems based on field measurements.

Prepare, transmit and expedite shop drawings, catalog cuts, samples and other submittals for approval. Maintain logs for all.

Coordinate design activities with the project management team to resolve layout conflicts.

Prepare construction document packages.

Conduct QA/QC reviews of all drawings to ensure technical accuracy and code compliance.

Perform field surveys, including manual dimensions, to gather data on existing site conditions.

Provide technical support to construction personnel and fabricators during installation.

Assist in preparing material takeoffs (MTOs) and bill of material (BOM) estimates for procurement.

Helps track project schedules, budgets, and change orders.

Required Skills

Associates in Drafting, Mechanical Engineering, or a related technical field. With 3–5+ years in piping design or mechanical construction.

Mastery of AutoCAD and 3D modeling software.

Knowledge of SpoolFab Piping Software is a plus.

Proficiency in Microsoft Office (Excel, Word) for reporting and documentation.

Strong understanding of industrial piping codes (e.g., ASME, API) and material specifications.

Familiarity with pipe fitting, joining methods, and fabrication processes.

High attention to detail and precision in drafting.

Strong verbal and written communication for collaborating with clients and site teams.

Ability to work in industrial environments, which may include heights or extreme weather

Equal Opportunity Employer

Stevens Engineers & Constructors, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

We are proud to be a Drug Free Workplace that places Safety First!

Company Description

JS Benefits Group is a flourishing Employee Benefit and HR consultancy, renowned for working with over 30 of the nation’s top carriers. Serving employers nationally with employee sizes ranging from 30 to 30,000, we offer comprehensive services including Group Health, Life, Dental, Vision, Disability, Voluntary Benefits, Executive Benefits, and HR Consulting. With over 25 years of experience, our core principles emphasize superior customer service, strategic partnerships, a proactive approach, and cutting-edge technology to manage and enhance employee benefits. Based on these principles, we ensure compliance and maximize returns on clients' investments.

Role Description

This is a full-time hybrid role for an Employee Benefits Sales Consultant located in Newtown, PA, with work from home flexibility. The Sales Consultant will be responsible for conducting sales consultations, maintaining customer satisfaction, offering expert consulting services, and delivering results. The role involves frequent communication with clients and prospects to understand their needs and deliver customized benefits solutions.

Qualifications

• Experience in Sales Consulting and Consulting roles
• Strong Customer Satisfaction and Customer Service skills
• Excellent Communication skills, both verbal and written
• Ability to work independently and in a hybrid environment
• Microsoft Suite proficient
• Experience in the benefits or HR consulting industry is a plus

Compensation

• $80,000 to $150,000 - Salary + Commissions 1st year and beyond

Certified Registered Nurse Anesthetist | Anesthesiology - General/Other

Location: Show Low, AZ

Employer: Rhino Medical

Pay: Competitive weekly pay (inquire for details)

Contract Duration: 2 Weeks

Start Date: ASAP

LocumJobsOnline is working with Rhino Medical to find a qualified Anesthesiology CRNA in Show Low, Arizona, 85901!

Show Low, Arizona Certified Registered Nurse Anesthetist (CRNA) Locum Tenens

Rhino Medical is leading the charge seeking an experienced Certified Registered Nurse Anesthetist (CRNA) for an ongoing locum tenens opportunity in Show Low, Arizona.

This is an outstanding opportunity to join a skilled anesthesia team providing comprehensive coverage in a full-scope, high-acuity setting. The position offers autonomy, schedule stability, and the chance to make an immediate impact while supporting a respected regional health system.

Assignment Highlights

• 
  
• Location: Show Low, Arizona
  
• Facility Type: Regional Medical Center
  
• Start Date: March 17, 2026
  
• Schedule: Monday – Friday | 7:00 AM – 3:00 PM
  
• Call: Yes | 20-minute response time
  
• Assignment Type: Locum Tenens | Ongoing (Temp-to-Perm potential)
  
• Supervision: None – Independent CRNA practice
  

• 
  
• 8 Total CRNAs
  
  • 
    
  • 6 CRNAs in OR coverage (Mon–Fri)
    
  • 1 CRNA on OB Float (primary call with post-call day off)
    
  • 1 CRNA on secondary call (no post-call day off)
    
  
  
  
• Flexible scheduling – may include occasional night shift rotation (11:00 PM – 7:00 AM, one week at a time)
  
• Regional anesthesia proficiency required (spinals, epidurals, ultrasound-guided blocks)
  

• 
  
• Primary: General, Orthopedic, OB/GYN, TOCALs/VBACs (473 deliveries, 220 C-sections annually)
  
• Additional Specialties: ENT, Podiatry, Urology, Plastics, Radiology, Vascular, and healthy pediatric ENT cases
  
• Regional Techniques: Spinals, Epidurals, and Blocks (ultrasound-guided)
  
• Occasional Blocks: PECS, Serratus Plane, Erector Spinae, TAP, Cervical Plexus
  
• No cardiac, no cath lab, no endo suite
  

• 
  
• Full-service regional medical center
  
• Strong clinical and surgical support teams
  
• Modern anesthesia equipment and ultrasound capability
  
• EMR: Cerner
  

• 
  
• Licensure: Active & unrestricted Arizona CRNA License (or compact eligibility)
  
• Certifications: BLS, ACLS, PALS (required)
  
• Experience: 2+ years of anesthesia experience with demonstrated proficiency in regional anesthesia
  
• Caselogs: Must provide recent documentation of spinals, epidurals, and blocks
  
• Credentialing: 60–90 days | Temporary privileges available for clean files
  

• 
  
• Independent CRNA practice – full autonomy in anesthesia delivery
  
• Stable Monday–Friday schedule with predictable hours
  
• Collaborative team culture in a respected regional facility
  
• White-glove credentialing and travel coordination handled for you
  
• Competitive weekly compensation with direct deposit
  

About Rhino Medical

At Rhino Medical Services, we don’t just staff locums—we fuel a mission to solve America’s healthcare shortage, one provider at a time. We exist for physicians who want more than just another assignment—who want to be heard, supported, and partnered with by a team that listens first and acts fast. Built on the mindset of aut inveniam viam aut faciam—“I will either find a way or make one”—we approach every opportunity with grit, intention, and heart. Our Tusk Experience is distinctive by design: white-glove service, transparent communication, and a commitment to serving with a sincere heart. You won’t find fluff here—just truth, loyalty, and a relentless drive to be the most referable name in locum tenens. Burn the ships. Join the mission. Choose Rhino.

1675497EXPPLAT

Certified Registered Nurse Anesthetist | Anesthesiology - General/Other

Location: Osceola, WI

Employer: Rhino Medical

Pay: Competitive weekly pay (inquire for details)

Contract Duration: 2 Weeks

Start Date: ASAP

LocumJobsOnline is working with Rhino Medical to find a qualified Anesthesiology CRNA in Osceola, Wisconsin, 54020!

Osceola, Wisconsin CRNA Locum Tenens

Independent Practice | 1:2 Call | OB & Regional Blocks | Epic EMR

Rhino Medical is leading the charge seeking a Board Certified CRNA for a locum tenens opportunity in Osceola, Wisconsin. This is an independent practice setting within a two-CRNA team model offering full-scope anesthesia coverage with regional blocks and OB experience.

This role is ideal for CRNAs who value autonomy, procedural variety, and a true independent rural practice environment.

Assignment Highlights

• 
  
• Location: Osceola, Wisconsin
  
• Start Date: June
  
• Minimum Commitment: 1 week
  
• Coverage: Days plus call
  
• Call Schedule: 1:2 rotation
  
• Practice Model: CRNA-only practice
  
• EMR: Epic
  
• Travel: Included
  

• 
  
• Two CRNA practice model
  
• Independent anesthesia coverage
  
• Approximately 100 deliveries per year
  
• Broad community hospital case mix
  

• 
  
• General Surgery
  
• Podiatry (Tuesdays only)
  
• Endoscopy
  
• Small volume Pediatric ENT (youngest ~6 months for tubes)
  
• Ophthalmology
  
• Urology
  
• Orthopedics
  
• OB
  

• 
  
• Adductor Canal
  
• TAP
  
• iPack
  
• Interscalene
  
• Lower Extremity / Popliteal
  
• Limited PECS blocks
  

• 
  
• Certified CRNA (NBCRNA)
  
• Active Wisconsin License (or ability to obtain)
  
• DEA & NRP required
  
• Comfortable in independent CRNA practice
  
• OB experience required
  
• Proficient in regional anesthesia
  

• 
  
• True independent CRNA practice
  
• Manageable OB volume (~100 deliveries annually)
  
• 1:2 call rotation
  
• Travel included
  
• Epic EMR
  
• Rural community setting with strong clinical autonomy
  

About Rhino Medical

At Rhino Medical Services, we don’t just staff locums—we fuel a mission to solve America’s healthcare shortage, one provider at a time. We exist for physicians who want more than just another assignment—who want to be heard, supported, and partnered with by a team that listens first and acts fast. Built on the mindset of aut inveniam viam aut faciam—“I will either find a way or make one”—we approach every opportunity with grit, intention, and heart. Our Tusk Experience is distinctive by design: white-glove service, transparent communication, and a commitment to serving with a sincere heart. You won’t find fluff here—just truth, loyalty, and a relentless drive to be the most referable name in locum tenens. Burn the ships. Join the mission. Choose Rhino.

1711740EXPPLAT

KGS Group is seeking a Senior Electrical Engineer to join our growing practice in Bellevue, WA or Granite Bay, CA.

About Us

We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We’re different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right.

As an employee-owned company, we’re invested in our work and our people. Working with us means you’ll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you’ll have countless opportunities to learn and grow.

Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team!

The Role

As a Senior Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large scale hydro projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering inputs often with multi-disciplinary project team members and senior stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our powerhouse and energy capabilities and working with key staff in growing that aspect of the business.

You’ll also be involved in supporting project management duties, liaising with both internal and external clients as well as assisting with guiding and mentoring graduate engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out onsite visits for rehabilitation and upgrades to dams, hydroelectric facilities and new hydroelectric developments. You will participate in design and play a large role in mentoring the team. You will be working in a collaborative environment with a great team of engineers and scientists, and you will also interface directly with clients.

Key Responsibilities

• Provide input to those managing and executing multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects.
• Establish and facilitate connections with other departments to support and enhance service delivery.
• Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules and budgets are met.
• Support and collaborate on new business opportunities with new and existing clients, as well as supporting business development efforts for electrical work.
• Manage and mentor junior staff.
• Design modifications to, or entirely new, electrical, instrumentation and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations.
• Manage and execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors.
• Design modifications to, or entirely new, electrical, instrumentation, protection, and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations.
• Perform electrical calculations.
• Conduct inspections and support project work on site as required.
• Edit and prepare design specifications.
• Provide detailed designs and coordination of facilities with team members.
• Conduct QA/QC reviews and provide leadership and mentoring related to KGS’s QA/QC process.
• Contribute to the development of the electrical engineering practice at KGS by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks.
• Perform other duties as assigned.

About You

• Minimum of a Bachelor of Science (BS) degree in Electrical Engineering from a recognized university. A post graduate degree would be an asset.
• Minimum of 15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules).
• Must be registered as a Professional Engineer (P.E.) in California, Oregon, or Washington, as well as eligible for registration as a professional engineer in other states by comity through NCEES.
• Demonstrated leadership of electrical design projects in the industrial power generation field, with experience managing and mentoring younger staff.
• Previous consulting experience is preferred.
• Excellent verbal and written communication skills are required.
• Candidate must be able to work independently with minimal supervision.
• Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information.
• Demonstrated experience in site investigations, condition assessments, design and construction support are preferred.
• Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation, and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered.
• Experience with the following would be considered an asset:
• Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup)
• Lighting (including emergency and exit lighting systems)
• Fiber and copper structured cable systems, and associated networking equipment
• Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience)
• Protection systems experience, including specifying, setting and verifying (include reference to voltages)
• Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training)
• North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning
• Physical or cyber security planning or design
• Unit outage planning
• Other renewable energy experience
• Travel to project sites is usually limited but is required depending on project/client requirements.
• Must possess a valid driver’s license and the ability/willingness to undergo security clearance checks.
• Have a drive, attitude, and commitment to being an active participant in our employee-owned culture is a must.

The salary range for this position is $130,000 to $180,000 annually.

Please note that the salary ranges mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate’s experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization.

KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package.

KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

DRA Global Limited is an international multi-disciplinary engineering, project delivery and operations management group, predominantly focused on the mining, minerals and metals industry.

The Group has an extensive track record spanning almost four decades across a wide range of commodities. Our teams have deep expertise in the mining, minerals and metals processing industries, as well as related non-process infrastructure such as, water, and energy solutions.

DRA covers all major mining centers with offices across Africa and the Middle East, North and South America, USA and Asia-Pacific.

We are seeking a Mechanical Engineer, based out of our Phoenix office. This position is responsible for the engineering and discipline project design activities relating to concept, pre-feasibility, feasibility studies, EPCM and EPC projects. Main functions include (but not limited to): design engineering, technical support, package management, site support, commissioning, and documentation and handover.

Engineering

• Carries out innovative detailed designs as required for specific disciplines following good engineering practices
• Designs conveyor and piping systems in area of responsibility (checked by relevant BMH or piping technical lead)
• Ensures that the quality of discipline designs are carried out in accordance with client standards and specifications, industry standards and the relevant legislation
• Provides design interface between disciplines
• Ensures certified design information received from vendors, contractors and consultants is accurate and interfaces with other designs
• Ensures the effective peer review and approval of discipline design
• Ensures continuous improvement, lessons learnt, value engineering, fit for purpose and latest technologies are implemented
• Is responsible for the engineering discipline sign off
• Interfaces with internal and external design and drafting disciplines
• Provides discipline inputs for studies and proposals
• Provides engineering support to the site team
• Performs commissioning discipline activities
• Manages the mark-up and back droughting of redline drawings

Operational Management

• Provides input into all SHE matters, actively participates, and promotes a total safety culture.
• Ensures that relevant project procedures are complied with
• Ensures that fabrication, manufacturing, and construction drawings are issued according to the project programmer
• Manages the time schedule, cost, quality, risk and scope of assigned procurement packages.
• Ensures assigned packages are installed / constructed in accordance with the project & vendor specifications
• Manages, inspects and releases the relevant items of procurement, fabrication and construction within area of discipline and responsibility
• Participates in the Total Safety Culture of DRA and site safety requirements
• Assists with the commissioning of the assigned packages in accordance with the project & vendor specifications
• Ensures that reports are structured, accurate, complete and well presented
• Displays proactive communication with project team with respect to discipline interface and problem solving

Financial

• Manages personal and design/droughting budget man-hours
• Manages budget as allocated per discipline/procurement package
• Ensures designs produced are in accordance with capital budget and quantities
• Ensures suitable contract management is applied to managed procurement packages
• Ensures proper change management procedure is adhered to

Client Relations

• Ensures that all interactions with Clients are conducted in professional and respectful manner
• Ensures that Clients are kept informed and updated on the technical aspects of the project
• Ensures that DRA remains the Clients engineering service provider of choice
• Liaises and co-ordinates with the client’s discipline engineers to ensure adherence to project and client requirements and specifications

PHYSICAL REQUIREMENTS/CONDITIONS

• While performing duties of this job, you may be required to stand, sit, alternate between sitting and standing, push/pull as necessary, reach overhead or below shoulder level, kneel, squat, stoop, crawl, and work at heights utilizing proper fall protection.
• Ability to access all areas of the job site and conduct physical evaluations of grounds and equipment including ability to work at high elevations.
• Personal protective equipment may be required when performing work on-site, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, protective clothing, gloves, and any other PPE as required.
• Work may be performed on an active mining construction site with various associated risks.

EDUCATION/SKILLS/EXPERIENCE REQUIRED

• Experience of onsite construction and commissioning experience within a multi-disciplinary team in Industrial, Mining & Minerals, Oil & Gas, or equivalent environment.
• Bachelor's degree in mechanical engineering preferred.
• Registered as a licensed Professional Engineer in the state of Arizona - desirable.

Note: This position is hybrid to Phoenix, AZ with onsite presence required at our Tucson site*****

DRA Global is committed to building a diverse and inclusive workplace where everyone feels valued and supported. We believe that diversity strengthens our ability to reach our goals, enhances our reputation, and helps us attract, engage, and retain great people.

We welcome applications from individuals of all backgrounds, regardless of gender, age, disability, ethnicity, or any other characteristic. Our values — People, Safety, Trust, Integrity, Excellence, and Courage — reflect our ongoing commitment to equal opportunities and an inclusive culture.

Senior Electrical Engineer (Commercial)

At I.C. Thomasson Associates, Inc, A Salas O’Brien Company we tell our clients that we’re engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That’s why we’re committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future.

Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career—and they’ll receive great total rewards along the way.

About Us:

Founded in 1975, Salas O’Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow’s requirements are today’s opportunities, and we are here to design lasting solutions for pressing challenges.

We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more.

Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day.

Job Summary: The ideal candidate to fill this position is an Electrical Engineer that is competent and confident in his/her abilities as an electrical engineer, especially with experience in commercial work. This person would be a Project Manager of multiple projects, work with an internal MEP/FP team to deliver projects that meet the objectives of the architect/owner. Business Development acumen is important, so understanding business development is a plus and opens many avenues for advancement. These activities may include developing an action plan to solicit and secure new work, implementation of goals, objectives, and priorities for the Nashville office, identifying prospective markets and clients, etc.

Responsibilities:

• Knowledge of electrical engineering principles in the field of building construction.
• Capable of increasing technical competency with experience and work ethic.
• Ability to effectively communicate with architects, owners and contractors.
• Ability to work well independently and as part of a strong team.
• Excellent organization and time management skills .
• ICT encourages the growth of all our engineers to take a more responsible and leadership role based on experience.

Qualifications:

• B.S. in Electrical Engineering
• 7+ years of work experience with complex building electrical systems in the commercial and institutional sector.
• Registered Professional Engineer, with Tennessee P.E. license, or ability to obtain a Tennessee P.E. license.
• Experience with Revit
• Excellent written and oral communication skills essential for team-based projects.
• Excellent planning and organizational skills required for simultaneous project schedules.
• Highly motivated, proactive and willing to take on new challenges.
• Willing to travel.

Benefits:

• Gain invaluable industry experience and practical engineering skills.
• Work with a diverse team of professionals, fostering networking opportunities.
• Access to mentorship and guidance from experienced engineers.
• Competitive compensation package.

Location: Nashville, TN

Travel:

Job Title: I&C Design Engineer

Employment Type: Direct Hire

Location: Dallas, TX – (onsite 4 days/week, off every other Friday)

Salary: $110-130k

Benefits:

• Medical, Dental, Vision
• Life Insurance
• 401k
• PTO
• Holiday

Summary:

Akkodis is seeking an I&C Design Engineer for a DIRECT HIRE position in the Dallas, TX area. The desired candidate will have 5+ years of previous experience design for electrical instrument and controls. The I&C Engineer will be responsible for the design/development of industrial control systems including SCADA, PLC, and HMI systems. This is an excellent opportunity to support an exciting company in the electrical engineering industry.

***Remote 1 day/week, and off every other Friday***

Responsibilities:

• Site assessment and determination of needed instrumentation/SCADA upgrades
• Review of existing project documents – P&ID, system architecture, electrical drawings
• Coordination with clients on specific needs
• Document findings – Write assessment or report of existing conditions and recommendations
• Design/development of project drawings, including P&ID, system architecture, loop diagrams, installation details
• Create project specifications, including instrumentation, networking, control narrative strategies, software and hardware requirements for SCADA, PLC, and HMI systems
• Quality Control/Quality Assurance of project documents
• Attend/Conduct project meetings with client
• Review and comment on project submittals
• Coordination with Electrical Engineering Department

Required Skills:

• Bachelors Degree in an Engineering related field is required.
• A minimum of 5 years of relevant I&C experience is required.
• MUST HAVE PE or EIT and sitting for PE soon.
• Must have experience designing SCADA, PLC, and HMI systems.
• Strong background in AutoCAD is preferred.
• Registered Professional Engineer (PE) or Engineer-in-Training (EIT) in Texas is required.
• Experienced in the design of construction documents.
• Write Technical Memoranda based on site assessment.
• Drawing/PDF markups.
• Design relay schematics (motor control).
• PLC and SCADA HMI development and creation of PLC I/O lists
• Wide Area Network (WAN) design, including radio and cellular communications
• Fiber optic cable specification
• Control panel design
• VFD design/interface
• Physical and cybersecurity assessment and design preferred.
• A proactive, solution-oriented approach to challenges, with a focus on team success.
• Strong ability to foster and maintain professional, cross-functional relationships.

If you are interested in this I&C Engineer job, then please click apply through Akkodis.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

Your Team The Assembly, Test, and Launch Operations (ATLO) Team plans and executes all space vehicle-level integration and test activities at Millennium.

ATLO creates the detailed flow of activities throughout the buildup of the space vehicle, writes and executes all test and assembly procedures used in these activities, conducts system-level through environmental testing, and performs integration to the launch vehicle.

Job Description The Principal ATLO Engineer will lead efforts across new satellite programs and established portfolios to shape production and will be a key player in meeting and exceeding our delivery targets, all while demanding a high standard of technical excellence in the assembly and test of satellites.

The Principal ATLO Engineer is expected to shape our current and future processes, and plays a critical role in linking our business strategy to the ongoing definition and development of large-scale satellite constellations.

The candidate is expected to contribute to a wide variety of program inputs including proposals, standard operating procedures, and resource management systems.

They will oversee the integration of new design and manufacturing techniques into testbed and flight systems, with a strong awareness towards safety, affordability, security, testability, and mission capability.

A Principal ATLO Engineer will report to and serve under the ATLO Director.

The ideal candidate is highly collaborative and a proactive problem-solver with experience in spacecraft integration, mission architecture, and production automation.

The ideal candidate can work equally well in a singular supervisory role or with multitalented teams on the production floor.

A Principal ATLO Engineer has experience in these fields: design for manufacturability, process mapping, spacecraft avionics, cost analysis and earned-value management, complex mechanical integration, environmental testing, launch integration, proposal writing, or high-rate manufacturing.

The ideal candidate must have an Active TS/SCI Clearance.

This position's internal job code is Systems Engineer.

Our team is currently hiring for levels 5 and 6.

Rotating Shift: This position requires employees to work various shifts on a rotating basis.

The shift times are subject to change and additional shifts may be added in accordance with company needs, but employees will only work one shift per day.

Each standard shift is 9.5 hours in length, 0.5 hours of which is designated for a lunch break.

Shifts contain 9 hours of work to follow the Millennium 9/80 calendar, meaning every other Friday is a non-working day.

The standard shift times are listed below.

First Shift: 0600 – 1530 Second Shift: 1430 – 0000 Position Responsibilities: Lead the planning and execution of a satellite program from assembly through launch Utilize statistical and analytical tools to monitor performance metrics of teams and product execution plans Interface with senior ATLO engineers as-needed to provide mentorship and guide the troubleshooting of critical non-conformances and Failure Review Boards Act as a signature authority on corporate processes like quality management system updates and design reviews Subject Matter Expert on end-stage satellite testing, such as environmental testing (EMI/C, Dynamics, TVAC) and launch integration campaigns, and uses expertise to assist and guide other engineers Drive improvements to increase production throughput, reduce space vehicle build hours and quality issues, and remove waste from complex processes Basic Qualifications (Required Skills/Experience): Bachelor's degree in any Engineering or related field Minimum of 15 years' experience in manufacturing, mechanical, electrical, test engineering, materials and/or process engineering for spacecraft Experience working on constellation spacecraft and/or multiple production vehicles (3 units) Proficiency with statistics, data analysis, cost/benefit analysis, business intelligence, and data visualization (e.g.

PowerBI, Tableau) Proficiency in tracking tools such as MRP/ERP, Jira, MS Project, manufacturing execution systems, Teamcenter/PLM, and configuration management Bring expertise to one of the following areas: medium-rate production (10-100 complex products per year), mechanical integration, electrical testing, spacecraft integration, program leadership, industrial operations, or systems engineering This position requires an active U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship Preferred Qualifications: 20 years' experience in space systems Excellent written and verbal communication skills, ability to make presentations to a wide variety of stakeholders including senior engineering, customers, and corporate leadership Experience working with a union represented workforce Willingness to work different shifts, travel to launch site/integration locations, and to support critical mission milestones when surge support is needed Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay-Range Level 5: $146,000
- $260,000 Level 6: $174,000
- $310,000 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

31, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires an active U.S.

Top Secret/SCI Security Clearance (U.S.

Citizenship Required).

(A U.S.

Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

As an Senior Spacecraft Systems Engineer, you will be responsible for owning the technical execution for programs and leading teams developing spacecraft systems serving a range of missions and customers.

This includes creating, monitoring, and guiding requirements definition, spacecraft design, procurement and fabrication, integration and test, and verification and validation of the overall space vehicle system.

You will interact with subsystem and unit engineers, manufacturing and test personnel, and program management.

You will manage the technical elements of the space vehicle system.

Our spacecraft systems engineers create spacecraft not just paperwork! This position's internal job code is Systems Engineer.

Our team is currently hiring for Levels 5-6.

Position Responsibilities: Provides systems engineering leadership to programs Provides mentorship to junior systems engineering and subsystem staff Collaborates with program and financial leadership to ensure successful programmatic execution Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced solution for space systems Understands spacecraft subsystems functions and interfaces.

Develops integrated spacecraft system designs and solutions Responsible for all aspects of spacecraft systems engineering including performing preliminary concept development, trade studies, CONOPS definition, requirements decomposition and allocation, interface requirements definition, requirements verification and validation, support to integration and test operations, anomaly resolution, risk management, and schedule execution Coordinates and communicates with subsystem engineering teams to ensure system execution Develops the planning organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes Applies model-based systems engineering techniques for the definition of the spacecraft system Participates in software integration and test activities to ensure mission functionality prior to deployment into operations Coordinates with management and peers to ensure the integrity of high-quality operational products, including procedures, tools, and system configuration Performs tasks to analyze technical data, verify and sustain specific systems configurations in accordance with defined constraints and operational requirements Performs various analyses to optimize the spacecraft system and/or system architecture Resolves cross-functional technical issues Develops and improves systems engineering processes Basic Qualifications (Required Skills/Experience): This position requires the ability to obtain a U.S.

Security Clearance.

for which the US Government requires U.S.

Citizenship.

A final U.S.

Top Secret security clearance is required post start.

Bachelor's Degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, or physics and 14 or more years' related work experience; Master's Degree in engineering related discipline and 12 or more years' related work experience; or an equivalent combination of technical education and experience.

14 years' experience with space systems engineering principles and techniques Experience with power, mass, and other system budgets Experience with requirements analysis and flow-down Experience with design verification and validation processes Experience with configuration management Experience with satellite level integration and test processes Experience with satellite in-orbit operations Preferred Qualifications (Desired Skills/Experience): Master's Degree in Aerospace or other relevant engineering or science discipline Greater than 18 years professional experience in space systems engineering Demonstrated familiarity with program management principles and tools Direct experience with one or more rapid spacecraft development programs and missions.

Experience with a full life-cycle from concept to in-orbit operations Demonstrated leadership and communications skills An active TS/SCI U.S.

Security Clearance.

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Level 5: $146,000
- $260,000 Level 6: $174,000
- $310,000 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

31, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a “U.S.

Person” as defined by 22 C.F.R.

§120.62 is required.

“U.S.

Person” includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Top Secret/SCI Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

As an Industrial Engineer, you will play a critical role in designing and optimizing production processes for large scale satellites production systems.

This position requires a deep understanding of manufacturing principles, Lean methodologies, and advanced industrial engineering techniques to enhance productivity, quality, and efficiency.

This position's internal job code is Industrial Engineer.

Our team is currently hiring for a level 5.

Position Responsibilities: Lead the team in improving productivity, reducing lead time, and maximizing space utilization through effective implementation of Lean principles.

Ensure successful execution of Lean projects Develop process flow models to analyze production system behavior and synchronize output with other elements of the company Leverage advanced industrial engineering knowledge and a strong understanding of Lean principles to drive continuous improvement initiatives Utilize Continuous Improvement tools to identify opportunities and lead projects aimed at optimizing operational costs and maximizing the use of manpower, equipment, space, and investments Work independently with manufacturing, quality, and R&D engineers to identify and implement equipment and process improvements, as well as enhancements in workspaces Implement corporate level processes that are aligned with organizational vision and goals Basic Qualifications (Required Skills/Experience): Bachelor's or Master's degree in Industrial Engineering, Mechanical Engineering, Manufacturing Engineering, or a related field Engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry.

Minimum of 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications Experience in Industrial engineering, manufacturing optimization, or process improvement within the automotive industry Strong expertise in lean manufacturing, Six Sigma, Kaizen, and other continuous improvement methodologies Experience with budgeting, cost analysis, and ROI calculations for capital improvement projects Familiarity with ERP and MES systems (SAP, Oracle, etc.) for manufacturing data analysis This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

A final U.S.

Security Clearance Post-Start is required Preferred Qualifications (Desired Skills/Experience): Six Sigma Black Belt certification Lean Manufacturing Certification Certified Industrial Engineer (CIE) or Project Management Professional (PMP) Excellent leadership, problem-solving, and decision-making skills Strong communication skills with the ability to influence and collaborate across all levels of the organization Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: Level 5: $159,800
- $235,000 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

29, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Top Secret/SCI Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

We are seeking highly motivated applicants to join our world-class team and help create the future of affordable, reliable space systems.

We are looking for candidates who have demonstrated practical problem-solving and technical experience in their previous roles.

Your work will be vital in transitioning a design to a real-life, mission-capable constellation of fully assembled satellites.

The Assembly, Test, and Launch Operations (ATLO) Team plans and executes all space vehicle-level integration and test activities at Millennium.

ATLO creates the detailed flow of activities throughout the buildup of the space vehicle, writes and executes all test and assembly procedures used in these activities, conducts system-level through environmental testing, and performs integration to launch vehicle.

The Senior ATLO Engineer will collaborate with many teams such as Programs, Engineering, Manufacturing, Facilities, and Security to shape the direction of satellite production and help the company meet delivery targets, while maintaining a high standard of technical excellence in the assembly and test of satellites.

The Senior ATLO Engineer is invited to improve the efficiency of current processes and play a critical role in developing satellites for manufacturability and large-scale constellations.

A Senior ATLO Engineer will report functionally to an ATLO Team Lead and serve under or as an ATLO program lead.

The ideal candidate is highly collaborative and a proactive problem-solver with experience in spacecraft integration, hardware-software integration, test systems, or production automation.

Rotating Shift: This position requires employees to work various shifts on a rotating basis.

The shift times are subject to change and additional shifts may be added in accordance with company needs, but employees will only work one shift per day.

Each standard shift is 9.5 hours in length, 0.5 hours of which is designated for a lunch break.

Shifts contain 9 hours of work to follow the Millennium 9/80 calendar, meaning every other Friday is a non-working day.

The standard shift times are listed below.

First Shift: 0600 – 1530 Second Shift: 1430 – 0000 This position's internal job code is Systems Engineer.

Our team is currently hiring for levels 3 and 4.

Position Responsibilities: Lead the planning and execution of a satellite program from assembly through launch Review initial engineering drawings and schematics to anticipate build challenges, and reach back into the company's early-design processes or proposal activities to create manufacturability improvements downstream Interface with technicians, quality inspectors, and engineers in a cleanroom as needed to guide the troubleshooting of non-conformances and corrective actions, and provide go/no-go judgment and rationale Integrate, test, and troubleshoot development platforms for flight vehicles to generate high-quality procedures and understand the functions of the system Act as a signature authority on test and assembly procedures, process plans, and new program initiatives Lead environmental testing of satellites (EMI/C, Dynamics, TVAC) and launch integration campaigns, including select responsibilities for overarching plans, maintaining schedule, and staffing Drive improvements to increase production throughput, reduce space vehicle build hours and quality issues, and remove waste from complex processes Utilize statistical and analytical tools to monitor performance metrics of teams and product execution plans Basic Qualifications (Required Skills/Experience): Bachelor's degree in any Engineering or related field Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g.

Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience Minimum of 5 years' experience in manufacturing, mechanical, electrical, test engineering, materials and process engineering, or similar field in Aerospace, Automotive, or Commercial industries.

Bring expertise to one of the following areas: medium-rate production (10-100 complex products per year), mechanical integration, electrical testing, spacecraft integration, program leadership, industrial operations, or systems engineering This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

Preferred Qualifications (Desired Skills/Experience): Minimum of 7 years' experience in space systems Knowledge of satellite manufacturing engineering principles, standards, and concepts.

Experience writing work instructions and procedures for critical aerospace parts in a production environment Experience with common hardware-integration tools such as NI LabVIEW, DAQ hardware, electrical power supplies, signal analyzers, and multimeters.

Experience with version control, understanding of basic software concepts, Python, C++, Linux environments, and computer network architecture.

Proficiency with statistics, data analysis, cost/benefit analysis, business intelligence, and data visualization (e.g.

PowerBI, Tableau) Proficiency in tracking tools such as MRP/ERP, Jira, MS Project, manufacturing execution systems, Teamcenter/PLM, and configuration management.

Experience with CAD software and engineering drawings Strong written and verbal communication skills, ability to make presentations to engineering, team members, customers, and management.

Experience working with a union represented workforce Willingness to work different shifts, travel to launch site/integration locations, and to support critical mission milestones when surge support is needed Active TS/SCI Clearance Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: Level 3: $119,000
- $177,000 Level 4: $146,000
- $215,000 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

29, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Top Secret Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

Location: Auburn Hills, MI

Position: Long Term Contract (Possible Extension)

Title: 26-00326 - Manufacturing Process Engineer – BIW / General Assembly (Bilingual Spanish & English Required)

Job Description:

• Vehicle Process Engineer Specialist (Toluca Vehicles) will create, updating and maintenance of process documents that affect the current and new vehicle program(s) project(s) and includes working in different process areas BIW and General Assembly.

Responsibilities:

• Vehicle Process Engineer must be able to perform studies for assembly processes, process documents creation includes graphics & illustrations of the parts to be assembled and its development contains the identification of assembly risks through the use and implementation of Process Failure Mode and Effects Analysis (PFMEA) on current and new products. The previous activities includes the sequence analysis to install parts, the implementation of product and parts engineering specifications, process tools specifications, digital process simulation studies and interferences analysis related to current and new products parts and assemblies, as well as any other study related to required process, it will be performed under the acknowledgment and use of the following software applications: Teamcenter 11, Siemens NX (NX Unigraphics software), Mockup and Vis-Professional Version 14.1 visualizers, MS Visio 2016, Autodesk DWG TrueView 2019, MS PowerPoint and MS Office 2016, Snipping Tool Version 10, AMPS - Advanced Manufacturing Planning Systems (Client Internal System). These computer software applications will be used to define process and identify in advance any potential process risk with the use of PFMEA technique to ensure the correct integration of processes on time, in a safety matter and in accordance with product specifications.
• As part of Process Failure Mode and Effects Analysis (PFMEA) development, Vehicle Process Engineer will generate the initial list of PFMEAs to be carried out according to the new processes requirements. The definition of PFMEAs will be performed in mutual agreement with VPE Cars, WPI (Work Process Integration) and plant team members. Once the matrix of PFMEAs to be generated has been defined, Process Engineer will be responsible to schedule meetings in mutual agreement with VPE and plant, develop and lead the PFMEAs. For the creation of PFMEA it will be required to populate the process steps on the PFMEA form provided by VPE Cars /WPI, which includes process steps, identifying potential process risks, establishment of severity, occurrence and detection values, establishment of recommended actions, assignment of responsible for each created recommended action, creation of summary reports after each PFMEA review and document posting into WPI web. It also includes the follow-up of open recommended actions with responsible(s) up to which all the actions will be closed as well.
• Vehicle Process Engineer will be responsible to perform the new and update process documents for the current and new vehicle product programs produced by Toluca Plant, it includes all product parts end items, parts change last level released by product engineering that may affect the process(es) and the inclusion of the changes into the processes should be done considering the product implementation date specified in the engineering change Vehicle Process Engineer will be able to understand the product specifications included in the Engineering Bill of Material (EBOM) system, Product Change Notes (CNs) and Engineering Bulletins.
• It is expected after being familiar with the product specifications, Client systems use and process document requirements that the Vehicle Process Engineer will develop a new process page under the rate of 30 minutes and meet the quality required. If the process or PFMEA's documents performed by Vehicle Process Engineer contain mistakes or missing information, the time used to fix the errors and meet the quality requirements will be covered by Engineering Services.
• Vehicle Process Engineer will provide these services considering performing in the different process areas BIW and GA process areas, work under pressure, availability to travel, assistance on weekends and sometime holidays.
• Vehicle Process Engineer is responsible to keep the information managed updated, control the changes, and manage the process documents assigned as well as have them available into the corresponding systems indicated in accordance with the vehicle(s) program(s) needs established by IME/ME. The confidentiality of the documents generated must be maintained across all the vehicle programs and assigned projects.
• Assist the VPE Cars engineers in the generation of process documents, graphics and PFMEAs, as well as during the revision and updating of these documents.
• Support to VPE Cars engineers in the presentation required to identify the process and product changes related or any activity related to new models as well as to current vehicles (carry over).
• Assist to obtain the product specification, parts and plant information required by VPE Cars Process in order to develop the process documents, Graphics, PFMEA's and tasks needed due to product changes, plant request to improve or update the process documents during the implementation of new and carry over vehicles. The supplier personnel should follow the confidentiality policy.
• Engineering services must be following the official Mexican norms and regulations applicable to the processes safety, environmental that are considered into Product Specifications (Process Standards, Material Standards and Quality MQAS Mexico Client during the work assigned to supplier in the process areas and the plant location.
• Support parts and vehicle(s) model data finding in Teamcenter requested by IME in order to develop and update the new and current process documents, graphics and PFMEA's.
• Assist to obtain information to develop and follow up vehicle(s) KPI's, create weekly reports and support any task related to process documents, it will be performed using forms and tools from VPE and Program Vehicle(s) Management.

Requirements:

• Teamcenter 14
• Siemens NX
• VisPro 14.1
• AutoCAD
• MS Visio
• MS Office / PowerPoint
• AMPS Client
• PFMEA basic template
• EBOM Client
• CN's Client

Education / Training:

• Engineering Degree Required
• Speak and Write Spanish and English
• 2 years as minimum experience in manufacturing process, operation plants, a variety of manufacturing engineering.

Construction Engineer / Senior Construction Engineer

Location: Los Alamos National Laboratory (LANL) | Onsite

Salary Range: $63–$72 per hour (commensurate with experience)

Per Diem: Available for qualified candidates

Role Summary

Los Alamos National Laboratory (LANL) is seeking a Construction Engineer with strong experience in capital projects, mechanical systems, field engineering, and construction execution within regulated or industrial environments. This role supports construction projects from planning and design through installation, commissioning, and closeout, with opportunities to act as a technical lead or discipline specialist.

Ideal candidates have backgrounds similar to mechanical engineers, field engineers, project engineers, or senior project managers who have worked on large-scale infrastructure, power, water, industrial, or government projects.

Key Responsibilities

• Support construction execution for capital projects including planning, constructability reviews, installation oversight, commissioning, and turnover
• Apply engineering judgment to resolve field issues, RFIs, constructability challenges, and schedule or scope impacts
• Coordinate with project managers, contractors, inspectors, and stakeholders to ensure safety, quality, and compliance
• Serve as a discipline lead or technical resource for mechanical, HVAC, piping, utilities, or facility systems
• Review drawings, specifications, submittals, and change orders
• Support cost estimating, forecasting, scheduling, and procurement activities
• Ensure compliance with applicable codes, standards, safety requirements, and regulatory frameworks
• Mentor or provide technical guidance to junior engineers or field staff as needed

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Construction Engineering, Engineering Technology, or a related discipline
• OR
• 8+ years of progressive experience in construction engineering, field engineering, or capital project delivery within industrial, infrastructure, or regulated environments
• Demonstrated experience supporting design-build or design-bid-build projects
• Strong understanding of mechanical systems, piping, HVAC, utilities, or industrial facilities
• Experience working on large capital projects ($1M+ preferred)
• Ability to work independently in the field while coordinating with multidisciplinary teams

Preferred / Highly Aligned Backgrounds

• Mechanical Engineer, Field Engineer, Project Engineer, or Senior Project Manager experience
• Power generation, water/wastewater, utilities, industrial, or government infrastructure projects
• Commissioning, startup, or operational turnover experience
• Regulated environments (DOE, DoD, FEMA, utilities, oil & gas, pharma, heavy industrial)
• Proficiency with tools such as AutoCAD, Bluebeam, Procore, Primavera, BIM, or MS Office

Nice-to-Have

• Professional Engineer (PE) license
• Experience leading portions of multi-discipline construction projects
• Energy, sustainability, water systems, or industrial HVAC experience

Equal Opportunity Employer

Los Alamos National Laboratory is an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic.