Patterns Llc Jobs Remote Jobs in Usa

Company Overview:

Jeans Innovation Center is a leading apparel and denim brand that is part of the Fast Retailing global family of companies. We believe people are the key to achieving our overall success. We are a company that is committed to developing and growing our talent to align with business growth and objectives.

Position Overview:

Jeans Innovation Center is seeking a Senior Pattern Maker who is proficient on Gerber systems, to create ready patterns, and has some denim and non-denim experience (import and domestic), will assist with Production (1st - Production) patterns as needed. Must be experienced with fittings and will perform pattern corrections within department timelines.

Responsibilities

• Create development patterns and make changes and edits on the Gerber system. Will make production patterns as needed
• Translate the design sketch and or sample into a first pattern using Gerber software on PC.
• Work with design/pre production team on fit specifics
• Create pattern card with all necessary information including final spec measurements and hand off to sample maker team.
• Along with delivering pattern card to sample maker, provide advice and or input on the right techniques to construct the garment.
• Ability to create novelty pattern work
• Receive completed sample from sample maker team and measure for accuracy.
• Attend development/production fittings of samples with design and pre production team.
• Review with team fit technician notes for any pattern adjustments needed to produce final spec measurements and development/production pattern to be handed off.
• Work with sample room on sewing construction based off patterns.
• Maintain a library of good basic patterns as a reference
• Organization patterns, and should adhere to ongoing timelines as needed
• Frequent in-person collaboration
• Other duties assigned by supervisor

Education and Experience:

• Must have a minimum 10 years of denim pattern making experience (import and domestic fabric)
• Knowledge of Gerber systems
• Ability to make Techpack
• Ability to digitize patterns preferred
• Knowledge of denim, denim shrinkage, twill and woven fabrics.
• Candidate must have experience with PC systems such as Outlook email, MS Word, and basic MS Excel
• Associates Degree from college or university preferred
• Must be willing to test for 1 hour during interview

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Physical Demands:

While performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle or feel; is occasionally required to talk or hear; walk, stand or otherwise move self in a reasonable way position to perform the essential duty. The employee must occasionally lift, carry or otherwise move or position up to 10 pounds.

Work Environment:

The noise level in the work environment is usually moderate to loud. The employee comes in contact on occasion with a sharp object. The general working hours are between 8:30 am to 5:30pm and overtime may be required from time to time.

Hourly Rate: $48.00/hr. - $49.50/hr.

*The offered compensation range is based on several factors, including, but not limited to, overall experience, relevant experience, education level, certifications, applicable skills and expertise, and location of the position.

As an Equal Opportunity Employer, Jeans Innovation Center LLC does not discriminate against applicants or employees because of race, color, creed, religion, sex, national origin, veteran status, disability, age, citizenship, marital or domestic/civil partnership status, sexual orientation, gender identity or expression or because of any other status or condition protected by applicable federal, state, or local law.

Position Title: TemporaryPatternmaker

Reporting to Title: Head of Design Studio & Atelier Operations

Summary: The Temporary Pattern Maker supports the Design and Product Development teams by translating creative concepts into precise, production-ready digital patterns. This role is responsible for ensuring the designer’s vision is accurately interpreted and executed through expert pattern-making techniques and collaboration across teams. The ideal candidate combines technical skill with an eye for detail, ensuring each sample reflects the intended fit, proportion, and design integrity.

Responsibilities include but are not limited to:

• Develop and create patterns utilizing Design team’s sketches as guides
• Provide feedback and suggest alternatives to ensure sketch can be translated into a pattern
• Ensure the overall vision and design details are interpreted correctly and realistically in samples
• Creates and develops digital patterns to support design and product development processes
• Advise sewers on necessary steps and techniques to create the sample accurately
• Inspect finished samples to ensure pattern accuracy, advise on changes

Position requirements:

• 8+ years of experience in patternmaking in high end, designer runway brands
• Proficiency in digital pattern making is required
• Tailoring experience required
• Excellent draping and/or flat patternmaking skills
• Strong fabric knowledge
• Strong communication skills
• Ability to work well in a high-pressure environment
• Working knowledge of Gerber technology

We are an Equal Opportunity Employer M/D/F/V

In compliance with the New York City salary transparency requirements, the potential salary for this position is from $65 to $70 per hour, which represents a range commensurate with experience, knowledge, and skills required.

Job Title: Salesforce Lead Consultant - Sales & Service cloud, LWC

Location: Torrance, CA - Hybrid Must (4 Days to office) - Locals Preferred

Employment Type: Contract-To-Hire/ Fulltime/ Permanent

About Smart IT Frame:

At Smart IT Frame, we connect top talent with leading organizations across the USA. With over a decade of staffing excellence, we specialize in IT, healthcare, and professional roles, empowering both clients and candidates to grow together.

Roles and Responsibilities

Drive the architectural strategy and vision for complex enterprise solutions within the Technical Architecture family Develop and maintain architectural frameworks and governance to ensure consistency across projects Conduct architectural reviews and provide expert guidance to development teams Facilitate communication between stakeholders including business development and operations teams Identify risks and propose mitigation strategies related to architectural decisions Lead innovation initiatives by exploring new architectural styles and patterns Provide leadership in troubleshooting and resolving complex architectural issues Support the professional growth of team members through coaching and knowledge sharing

Mandatory Skills: Architecture Patterns and Styles,Microservices Architecture,Architectural diagrams,SOA and Microservices Based Architecture,Software Engineering and Design Architecture,CI/CD Architecture,Service Oriented Architecture,Architectural Patterns

Experience Level: 8 to 10 years

Job Summary:

Diane Gilman (RTW Division) is seeking a detail-oriented and highly organized Associate Technical

Designer to join our Technical Design team. The ideal candidate will support the technical design

process- ensuring fit, quality, and construction standards are maintained across all styles. In this role,you will collaborate cross-functionally with Design, Production, and Overseas partners across multiple brands and categories of knit and soft woven womenswear. This is a mid level position. Candidates must have at least 4 years of working experience in Technical Design not including internships.

Key Responsibilities:

-Follow established fit standards and processes.

-Track, prepare and measure fit samples before fittings.

-Support Senior Technical Designer in reviewing and evaluating sample measurements and

construction of all fit samples to determine they are meeting intended design requirements.

-Collaborate with design and production teams through live model fittings.

-Take clear notes for designated product area during fittings.

-Give input during fittings to communicate fit issues and give solutions to improve garment fit and

construction.

-Issue revised product specifications and fit correction comments after the fittings in the PLM system. This includes photo or sketch corrections and pattern correction images as necessary.

-Work with the Production Team in meeting timelines and communicating the necessary information to the overseas factories.

-Check all grading and tolerances are updated properly for bulk production.

-Follow through with questions and requests from overseas partners via email.

Qualifications:

-College or university level degree in Fashion Design, Apparel Technical Design, or related field.

-Minimum of 4 years of working experience in Technical Design is required in addition to or aside

from internships.

-Experience in womenswear is required.

-Basic patternmaking knowledge is required. Candidates must know how fit corrections will be

conveyed in revising patterns to communicate with factories.

-Must be proficient in Adobe Illustrator, Microsoft Excel, and PLM systems. Experience with Centric

PLM is highly preferred.

-Excellent organizational and time management skills.

-Excellent verbal and written communication skills.

-Ability to multitask in a fast-paced environment and meet seasonal deadlines.

-Experience working with overseas vendors in a corporate apparel environment.

-Excellent attention to detail.

-Must be able to identify problems as well as create solutions to correct the issue.

-Ability to work closely in collaboration with all cross functional partners.

-Motivated to grow as a Technical Designer and willing to learn new ways of working.

-Proactive in following through with multiple priorities.

-Team player mindset.

-Must be able to work onsite 5 days a week. This is not a hybrid role.

-Must be authorized to work in the US.

About the job:

Our client is searching for its newest team member at our headquarters in Denver, Colorado! Our next Senior Apparel Technical Designer will need to possess excellent team skills and a strong understanding of garment fit and construction.

The successful candidate will be responsible for supporting the entire Product Development Department. The person who fills this position must also have a passion for the work they do and a strong desire to learn and grow.

Our employees enjoy a fun, casual, laid-back atmosphere.

If you have a solid amount of technical design experience with apparel or an educational background, then this is your opportunity to be a part of something great!

We want to hear from you if you possess the following skills, abilities, and qualifications:

This position is in-office only.

As a Senior Apparel Technical Designer, you would be responsible for:

• Maintaining a positive work atmosphere by acting and communicating in a manner that enables you to get along with customers, clients, co-workers, and management
• Create technical packets in PLM, ensuring that all details are commercially viable with the factories and are the most cost-effective.
• Review technical packets and samples from contractors for design accuracy and integrity.
• Execute design and fit intent into bulk production while maintaining corporate standards.
• Collaborate with team members and cross-functional team members to gain clear direction and consensus of design and fit intent.
• Identify potential production, quality, and costing issues and make recommendations to ensure brand integrity.
• Work closely with the Quality department throughout the development process to ensure communication of potential production quality issues.
• Negotiate costs with vendors.
• Ensure size and fit consistency within the brand and across product categories.
• Lead fit sessions and takes initiative as the fit expert of all products.
• Build and maintain fit base. Libraries including sketches and finished garment measurements
• Review and maintain the How-To-Measure Manual.
• Track and manage workflow and workload for own products.
• Identify and proactively engage business partners when issues arise with recommendations for viable options/solutions.
• Foster open communication and team environment with all business partners.
• Participate in departmental and cross-functional meetings as appropriate.
• Participate in process reviews and suggest ideas for improving procedures; help ensure processes and procedures that have been established are being followed by the team.
• Assist other team members with pattern and grading questions and concerns.
• Review the work of less tenured colleagues and guide them through any discrepancies they may encounter in order to help them learn and grow.
• Other tasks as assigned

Requirements:

• Bachelor's degree (B.A) From a four-year college or university
• At least 7 to 9+ years of related experience and/or training
• Self-motivated with a strong sense of urgency and a strong sense of time awareness.
• Thorough attention to detail and organizational skills
• Excellent interpersonal, verbal, and written communication skills
• Creative approach to problem-solving
• Ability to calculate figures and amounts such as fractions, discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to apply concepts of basic algebra and geometry

Ability to multitask:

Use the combination of organization, time management, scheduling, and preparation to get multiple tasks completed by the established deadlines.

• Ability to work well under pressure
• Ability to analyze quality and maintain standards with contractors
• Ability to produce computer-generated technical sketches
• Team-oriented, entrepreneurial, proactive attitude
• Expert knowledge of fabrics, construction, finishes, trims, fitting, and techniques
• Expert knowledge in patternmaking including grading, construction and fit;
• Ability to make pattern adjustments
• Ability to make independent decisions based on a higher level of knowledge and expertise
• Ability to mentor less tenured teammates and share knowledge and expertise with others.
• Ability to think big picture;
• Thorough understanding of how Product Development decisions and processes impact other areas of the Company (i.e., sales)
• Proficient in Illustrator
• Knowledge of Photoshop

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Accountability:

Develop, implement, and troubleshoot CNC program designs. Provide technical expertise in collaboration with functions across the organization to achieve project goals. Work closely with production to solve problems. Use strong analytical design and project management skills along with product expertise to meet customer requirements.

Essential Functions and Duties:

• 
  
• Prepare computer programs to control CNC machine operations using CAD/CAM terminal (Siemens NX and MasterCam).
  
• Prepare flow charts, documents and sequence logic and write complete sequence of machine operations necessary to complete cycle.
  
• Analyze engineering drawings for materials, process fabrication and design elements.
  
• Specify patterns on programming sheet for way part is to be machined.
  
• Assure program meets target cycle time and program generates geometry to customer requirements.
  
• Select appropriate cutting tools, speeds and feeds, tool path application necessary to perform the operation.
  
• Assist in the concept design of required tools and gages, support changes to existing tools and fixture as improvements are identified.
  
• Support lean activities both within the Engineering group and across the organization.
  

Complexity of Tasks:

Requires strong verbal and written communication skills along with advanced interpersonal skills. Strong project management skills are essential. Must be able to collaborate with other departments and functions in achieving project goals. Use available resources to support customer needs and expectations on both a national and international level.

Qualifications:

• 
  
• Bachelor's Degree in an engineering discipline preferred and/or equivalent experience.
  
• Ten or more years direct experience in multi-axis programming of Aerospace machining operations and materials.
  
• Ability to program in appropriate programming language using either a CAD/CAM terminal and/or manually generated.
  
• 3D modeling sketcher, assemblies, lathe, and drafting capability in Siemens PLM (NX 8.5) or later version
  
• CAD/CAM software: Siemens NX and MasterCam required
  
• Full multi-axis (5+) or partial (3+1) and general CNC machining/programming experience with lathes, milling machines, and mill/turns. Grinding experience preferred.
  
• CG Tech Vericut experience required.
  
• Capable of debugging programs and working closely with shop floor and inspection personnel.
  
• Some tool design experience preferred.
  
• Proper application and knowledge of various cutting tools and holders to efficiently complete program operations.
  
• Must be a team player and have the ability to work closely in a shop environment.
  
• Seek ideas for continuous improvement; suggest and encourages innovative ideas to improve current systems and processes.
  
• Working knowledge of Microsoft office application software to include Word, Excel and PowerPoint required
  

This position is currently accepting applications.

Apply Now

This position plays a crucial role in assisting the design team in conceptualizing, developing, and executing innovate designs for the Beach Riot brand.

Key Responsibilities:

·     Work directly with the Senior Designer to assist in all areas of design and product development for

the Active/Lounge category.

·     Responsible for management of all category specific SMU (Special Make-up) requests

·     Assist in lab dips and print strike off comments

·     Update seasonal tracker with changes and color approvals

·     Research and identify trends relevant for Beach Riot

·     Find fabric, trim, and print inspiration

·     Sketch new designs under the Senior Designer’s direction

·     Create similar repeat patterns and graphics

·     Create style numbers, techpacks, and construction pages to hand-off to tech team

·     Update techpacks and linesheets with changes

·     Set up color palettes in Adobe Illustrator

·     Set up print/art files

·     Maintain and organize submits and approvals in seasonal binders

·     Assist in print creation and recoloring

·     Attend all fittings and take detailed notes

·     Maintain CAD library in Dropbox

·     Complete tasks with a sense of urgency and meet deadlines

Requirements:

Bachelor or Associate degree in Fashion Design

Two or more years of relevant work experience, preferably in the active and casual apparel space

Some graphic/textile art experience preferred

Proficient in Adobe Illustrator, Adobe Photoshop, Google Sheets, and Google Docs

Self-starter with strong organizational and communication skills

Strong sense of creativity and sketching skills in Adobe Illustrator

Detail oriented and highly organized

Ability to prioritize, handle multiple tasks/projects, and work well as a team

Strong knowledge of garment construction