Partiful Crush Function Jobs in Usa
8,460 positions found — Page 15
REQUIREMENTS AND PREFERENCES
The Broward County Board of County Commissioners is seeking qualified candidates for the position of Risk Manager in the Aviation Administration - Risk Management section.
2026 Benefits of Broward County Employment
Eleven (11) paid holidays each year
Vacation (Paid Time Off) = 2 weeks per year
Tuition Reimbursement (Up to 2K annually)
Up to 40 hours of Job Basis Leave for eligible positions
Paid Parental Leave
Health Benefits
High-Deductible Health Plan - bi-weekly premiums: Employee $10.90 / Family $80.79
Includes a County Funded Health Savings Account of up to $2000 Annually
Consumer Driven Health Plan - bi-weekly premiums: Employee $82.58 / Family $286.79
Florida Retirement System (FRS) - Pension or Investment Plan
457 Deferred Compensation County matches up to $2,000 a year
General Description
The Aviation Department which operates the Fort Lauderdale-Hollywood International Airport and the North Perry Airport is seeking qualified applicants for the position of Risk Manager for the Risk Management section within the Administration Division. The Risk Manager will serve as the cornerstone of BCAD's risk management program, ensuring the airport is protected from liability by evaluating risk exposures, reviewing and negotiating complex contracts, and establishing and enforcing insurance requirements and renewals for all vendors and third parties. It provides critical oversight of procurement activities, analyzes bid documents, and safeguards compliance through the monitoring of Certificates of Insurance. The role also represents the airport's risk management interests in high-stakes meetings with airlines and key vendors, supports County departments with insurance guidance and trains staff across multiple divisions. With its blend of technical insurance expertise, legal interpretation, contact analysis, and staff leadership, this position is integral to minimizing financial exposure and maintaining continuity in BCAD operations. The employee will function as the Safety Management System Coordinator for Landside Operations in conjunction with the Operations Division. This position will supervise a loss and safety team on our construction sites and will ensure Occupational safety and health training and education program tracking.
Plans, develops, implements and maintenance of an airport Safety Management System (SMS), which includes - SMS anonymous reporting, tracking, investigation, and audits; facilitation of the safety risk management (SRM) process; conducting safety assurance meetings and inspections; and providing safety promotion initiatives and incentives; as well as Gap Analysis, Data Collection Review and Synthesis, Updates, Committee Meetings, Safety Assurance Evaluations, and SMS manual and related policies and procedures updates.
This position will work closely with the Operations Division and Maintenance Division regarding employee safety issues and the general risk and safety conditions of the airport. Walk job sites, review reports, and meet with contractors and PMs to resolve safety hazards and OSHA non-compliance. Another important function is to establish and maintain relationships across lines of business as well as with BCAD's partners, including but not limited to BSO, Concessions, Airlines, Ground Handlers, Fuel Farm, Fire and Rescue.
Manages insurance renewals for BCAD and vendor insurance review; mediate claims between attorneys, claimants, and insurance companies; investigate backup for claims and secure additional documentation as needed; liability and subrogation claims. public records request process and review of video requests.
Reviews Loss Control and collaborates with all BCAD divisions and various partners to ensure risk is reduced.
Training and educating expanding community (700+) BCAD employees on compliance and safety standards.
Minimum Education and Experience Requirements
Requires a Bachelor's degree from an accredited college or university with major coursework in business or public administration, risk management, construction project management, occupational safety, or closely related field
One year of relevant experience may be substituted for each year of required education.)
Requires three (3) years of experience in an administrative capacity reviewing and evaluating safety programs, conducting worksite safety evaluations for loss prevention, performing risk management analysis and claims oversight and review.
Special Certifications and Licenses
Must possess a valid Florida Driver's License with authority to drive a county vehicle for the duration of appointment.
2-20 Property and Casualty License
Certified Safety Management Practitioner (CSMP)
Occupational Hygiene and Safety Technician (OHST)
Construction Health and Safety Technician (CHST)
Certified Safety and Health Manager (CSHM)
Construction Risk and Insurance Specialist (CRIS)
Certified Safety Professional (CSP)
PreferencesDoctorate Degree in Law, Safety, Business, Insurance
Master's degree in risk management, Safety, Construction, Business or Public Administration
Associate in Risk Management - Public (ARM-P)
Chartered Property Casualty Underwriter (CPCU)
Underwriter experience or insurance agent or insurance broker license
Certified Risk Management (CRM)
Certified Risk Management Professional (CRMP)
Minimum one (1) year of prior experience with Wrap Up (OCIP) insurance programs
Minimum one (1) year of prior experience analyzing contracts to determine insurance requirements
**All Aviation Department employees must possess the ability to interact courteously with the public, Airport vendors, contractors and fellow employees to maintain a professional work atmosphere by acting and communicating in a manner that promotes a positive work environment and to support the completion of work and tasks internally and externally in an efficient and effective manner.
SCOPE OF WORK
The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.
Oversee the safety program's continued growth implementation review. To be the liaison with all departments for safety. Will also be responsible for reviewing and categorizing incoming issues through maximo (NON 139 SMS items).Implements and maintains automated Certificate of Insurance (COI) tracking system. Trains other Departments on utilization of the COI tracking system. Performs audits on certificates of insurance to determine compliance with insurance requirements.
Coordinates with Emergency Services and Communications, local, state and federal officials regarding FEMA guidelines and regulations.
Maintain information on BCAD's insurance policy and support the renewal process yearly. Utilize information and safety data collected to identify safety issues and help to mitigate claims, focus in on reoccurring issues and potential necessary projects training or other avenue to support the removal, mitigation or support for the identified safety risks.
Oversee the implementation of the new software (CTrax), when up and running, which is meant to track certificates of insurance and contractors.
Coordination with Director on regular basis to create strategies to support the forward movement in the areas of safety and insurance.
Exposure to Safety Management System (SMS) concepts or a readiness to learn and apply SMS practices in an airport environment.
Handle liability and subrogation claims; respond to public records requests and save and view video requests; training and educating expanding community (650+) BCAD employees on compliance and safety standards.
Plans, develops, authorizes, implements, supervises and evaluates programs/projects, activities and services on a large scale with County-wide impact; facilitates inclusion, prepares reports, and analyzes and interprets data.
Coordinates and manages all aspects of a program or project which has operational responsibility of a major scope, a large-sized budget and provides a critical County service.
Assists Director and Agency Leadership by researching issues, creating memorandums, policies, procedures, reports, etc. and monitors/advises on staff compliance with policy and procedures.
Conducts special research in conjunction with a project/program, analyzes data, and makes recommendations based upon research.
Identifies and understands agency/business needs, contractual business requirements, and regulations governing local, state and other requirements, confidentiality obligations, warranties, liabilities, indemnification, termination clauses, breach, and remedies.
Communicates business risks to project manager, senior/executive management, and approving authority for assessment and approval, while focusing on comprehending client-agencies' needs and business processes.
Coordinates with state and local agency partners on projects and programs, community outreach, media relations and regional and various services; may assist with press releases and responses to media.
Advises and assists the Department and Division Directors on all operational and technical matters related to the section(s) or function(s) assigned.
Reviews property claims and submits to insurance broker, communicates with attorneys as required.Participate in meetings involving contract negotiations, insurance requirements, sunshine meetings, risk assessment, claim reviews, and Risk Management Division meetings.
Monitor legislative decisions concerning property, casualty and liability issues, and rules and regulations potentially impacting the County.
Supervises, trains, develops, and motivates staff. Meets regularly with staff, to maintain open communications, ensure adequate workload, and update standard procedures.
Advises and educates other agencies on the risk management process and the importance of Enterprise Risk Management (ERP) to the County. Supports the Risk Management Information System (RMIS) by maintaining the Property Schedule and insurance policies.
Defines agency goals and objectives, develops and recommends policies and operating procedures.
Administers internal/external communications and public outreach activities for Division; manages and coordinates outreach efforts with other County divisions as well as other local and state governments and partnering agencies.
Prepares Commission agendas, including editing, posting and planning.
Provides assistance and training of agency staff and contracted services providers. May oversee the Agency's training program; schedules and/or delivers training and outreach opportunities for employees and the vendor community respectively.
Plans, organizes and implements a compliance and monitoring program, conducts contract central audits, field documentation reviews, investigations or management studies.
Oversees claim activity to ensure proper adjudication of claims in compliance with State regulations. Ongoing coordination of claims coverage to ensure proper investigation, treatment, and loss prevention actions are taken.Attends meetings which include contract negotiations, sunshine meetings, risk assessment, claim reviews, department meetings, both downtown risk and facility; participates in the negotiations and purchase of insurance coverage applicable to the facility or project.
Oversees/handles data collection from other agencies, inputting into system, refinement of procedures for handling, advising/educating other agencies on the process and what's important and how it affects them.
Performs related work as assigned.
WORK ENVIRONMENT
Physical Demands
Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.
Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.
Unavoidable Hazards (Work Environment)Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.
None.
SPECIAL INFORMATION
Competencies
- Business Insight
- Financial Acumen
- Manages Complexity
- Cultivates Innovation
- Optimizes Work Processes
- Ensures Accountability
- Builds Networks
- Builds Effective Teams
- Communicates Effectively
- Situational Adaptability
County Core ValuesAll Broward County employees strive to demonstrate the County's four core behavioral competencies.
- Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
- Customer focus: Building strong customer relationships and delivering customer-centric solutions.
- Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
- Values differences: Recognizing the value that different perspectives and cultures bring to an organization.
Americans with Disabilities Act (ADA) ComplianceBroward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.
Emergency Management ResponsibilitiesNote: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.
County-wide Employee ResponsibilitiesAll Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.
All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.
Business Overview
KINESSO is the technology-driven performance marketing agency providing actionable growth for both our agency partners and clients. We turn 'action' into 'outcome' for our clients, leveraging our unique capabilities in optimization, analytics, AI, and experimentation. KINESSO has brought together the collective power of what was formerly Matterkind, Reprise, P3, and Kinesso under one collective entity that will serve as the most powerful delivery engine in the industry. We have extensive offerings spanning across performance marketing and data and technology. Fueled by a deep understanding of consumer behavior, we offer an end-to-end engine of planning and optimization while also delivering on data-driven strategy for social platforms, actionable growth in e-commerce, and creating curated marketplaces specific to each client's function and needs. The company has more than 6,000 employees operating in more than 60 countries. Learn more at Summary
We are looking for you - dynamic, best-in-class talent - to join the growing Commerce team as a Senior Associate. In this role you will support in the development, planning, buying, executing and measuring media plans for designated shopper/commerce media clients. As a Senior Associate, you will create, innovate, and guide Commerce planning and buying processes. You'll work closely with national Planning and Buying teams to allow for holistic Commerce media function.
The Commerce team is a specialty group that focuses on the planning, buying, execution and measurement of Commerce media. Commerce media is any specific media elements that are retailer focused/tagged. This can be in-store signage such as a coupon machine or shelfblade, a billboard driving shoppers to a Walmart store, digital ads (search, display, OLV/STV, etc) on Amazon or site via managed or self service, tapping influencers that support certain retailers or working with shoppable technology companies to ensure ease of conversion. The team supports client's commerce/shopper/customer marketing teams-our end goal measuring product sales both online and in-store.
Who You Are
Enthusiastic about media with a desire to learn and build knowledge across all aspects of commerce inclusive of retail media networks, programmatic media, instore, shoppable tech and more. You thrive in a fast paced and fun environment. You're ready to level up your career in media and are excited to partner with some of the world's leading consumer brands.
Responsibilities
Media Knowledge
o Knowledge of media channels (e.g. display, OLV, STV, instore, OOH, etc.) and/or retail media networks & their platforms
o Familiar with both DSP interface functionality and levers (campaign hierarchy, audience builder, PMP/PG set up, reporting suite) as well as managed service dashboards
o Preliminary understanding of individual RMN capabilities across tactic, targeting, reporting methodology, etc.
* Account Management & Strategy
o Supports Manager in development, presentation, management and measurement of omnichannel commerce media programs
o Leads RFP and negotiation process for managed service campaigns ensuring previous learnings are applied
o Assists in building audience targeting details and budget allocation at the tactic/placement level based on client goals for either self service or with partners during the RFP process
o Takes learnings from previous campaigns and apply to next campaign
o Hosts kick off calls for new campaign launches with partners and/or DSP activation team ensuring client approved strategy is reflected accurately in self service platform
o Supports in identification of growth opportunities and shares ideas for potential test and learns
o Takes lead on managing vendor communications and delivers client communications where appropriate
o Contributes to building an effective detailed media plan, inclusive of tactics, audiences, flighting, KPIs, etc. that drives client performance
o Input and manage plans within MediaTools where applicable
o Supports in the creation of client ready materials (e.g. presentations, reporting, etc.)
o Maintain detailed files of all pertinent records (latest media plans, performance reports, etc.) relevant to clients' business
o Responsible for owning any status documents and timelines whether internal or client facing
o Responsible for accurate meeting minutes and recaps/next steps where appropriate
o Demonstration of knowledge of outstanding deliverables on the team agenda
o Day to day lead for billing and responsible for actualizing and clearing invoices
* Execution
o Involved in the buying process and stewardship for media programs to ensure original objectives are being met
* Managed service: works with partners to maintain campaign and optimize based on performance, monitors within partner dashboards where applicable
* Self service: works with DSP activation team to ensure relevant strategies are implemented and campaigns are optimized based on performance, monitors within platform
* Works with retailers and DSP partners to ensure proper data onboarding and any necessary paperwork is completed prior to campaign launch
o Responsible for locating, determining, and building relevant audience segments in DSP platforms
o Manages coordination of creative assets between client, creative agencies and partners
o Owns accurately entering IOs into Prisma and building Trafficking sheets
o Become proficient with 3rd party ad-serving and site served placements, tracking & analytic systems to be able to accurately input media plan details and launch campaigns
o Monitors pacing to ensure delivery is appropriate and aligned to campaign flighting for both managed and self-service campaigns
o Measures media performance at all stages to ensure original objectives and strategies are being met to client satisfaction
o Analyzes and reports data on daily/weekly/bi-weekly/monthly & ad-hoc basis
* Data may be provided from partners or DSP activation team, with self service data being reviewed more frequently
* Turns insights into long-term action by highlighting clear flow of cause, effect and next steps
o Demonstrates ability to use historical data or vendor relationships to create benchmarks for current campaign performance
o Maintains client and industry benchmarks for point of comparison when evaluating campaign performance
* Relationships
o Day to day lead with media partners across communication and scheduling of meetings
o Works cross-functionally with national planning & investment, ad operations, product, reporting, analytics, finance and other groups across the account
o Active participants in key vendor meetings ultimately sending recaps/notes for the full team
o Mentor Associates and provide opportunities for continued growth
* Training/Development
o Participation in trainings and proactive communication around areas of needed/desired growth for self and Associate
o Proactive idea sharing with internal team
* Industry Knowledge
o Seeks out information to remain current on media trends and shares with team members with relevant implications/potential opportunities
o Familiarity with client business objectives and connections to our day-to-day work
Required Skills & Experience
* Working knowledge of commerce industry and platforms including major retailers and supporting technology (e.g. Amazon Ads, Walmart Connect, Roundel, Pacvue, Skai, Criteo, TTD, etc.)
* Agency and/or Commerce media
* Project management; effectively managing multiple projects and meeting tight deadlines under a fast-paced environment.
* Process oriented and organized, with the ability to juggle many tasks at one time. Time management skills are critical
Desired Skills & Experience
* Bachelor's degree or equivalent experience
* 1+ years of ecommerce experience preferred
* Excellent written and verbal communication skills and proven problem solving ability
* Self- sufficient and proactive
* Comfortable in managing up across task progress, campaign performance and team needs
* Proficient in Microsoft Office (Excel, PowerPoint, etc.)
* Knowledge with industry tools such as MediaTools, Prisma, etc
Wage and Benefits
We offer a Total Rewards package that includes medical and dental coverage, 401(k) plans, flex spending, life insurance, disability, employee discount program, employee stock purchase program and paid family benefits to support you and your family. The salary range for this position is posted below. Where an employee or prospective employee is paid within this range will depend on, among other factors, actual ranges for current/former employees in the subject position, market considerations, budgetary considerations, tenure and standing with the Company (applicable to current employees), as well as the employee's/applicant's skill set, level of experience, and qualifications.
Employment Transparency
It is the policy of our company to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, ethnicity, gender, age, religion, creed, national origin, sexual orientation, gender identity, marital status, citizenship, genetic information, veteran status, disability, or any other basis prohibited by applicable federal, state, or local law.
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
The employer will make reasonable accommodations in compliance with the American with Disabilities Act of 1990. The job description will be reviewed periodically as duties and responsibilities change with business necessity. Essential and other job functions are subject to modification. Reasonable accommodations may be provided to enable individuals with disabilities to perform the essential functions.
For applicants to jobs in the United States: In compliance with the current Americans with Disabilities Act and state and local laws, if you have a disability and would like to request an accommodation to apply for a position, please .
Salary Range$70,000—$75,000 USD
Controls Technician II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
923
# of Openings:
1
TITLE: CONTROLS TECHNICIAN II
LOCATION: Ashburn, VA
POSITION SUMMARY:
Controls Technicians monitor the control systems of automated equipment. They use software to verify that the controls are within certain parameters and work to quickly troubleshoot problems when they arise to avoid or minimize interruptions to production. The Controls Technicians II works under general supervision, independently performing the essential functions at an advanced level.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Responsible for providing an advanced level of expertise in maintaining, troubleshooting, and servicing all aspects of the building automation systems.
* Must have the ability to maintain, improve, and participate in troubleshooting HVAC equipment serving throughout mission critical facilities.
* Install, configure, test and maintain application software and system management tools
* Oversight and hands-on troubleshooting experience with electrical and mechanical systems are desired, across the spectrum of technologies that support continuous operations.
* Basic writing and verbal skills are required. Effectively communicate with the site management team and the customer to understand requirements and solve complex facility system problems.
* An understanding or ability to quickly learn electrical and mechanical systems along with prior experience with facilities system troubleshooting is highly desirable.
* This position may collaborate with other specialized technicians, mechanics or subcontractors to perform facility-related maintenance and repairs.
* Provides instruction, mentors and trains less skilled technicians as needed.
* Mechanical and Electrical systems oversight, oversee and monitor all components of the site infrastructure to ensure operational integrity.
* Participate in test & commissioning phases of construction for validation of programming
* Perform data integration of equipment utilizing various field protocols (BACnet, Modbus, etc.)
* Monitor's suppliers and third-party vendors as required
* Communicate with remote and local supporting personnel via email and telephone
* Demonstrates attention to detail, good comprehensive and analytical skills, and excellent organizational skills.
* Understands company policies and enforces safety regulations. Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tag-out procedures.
* Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work.
* Other duties as assigned by Manager or Supervisor.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
* High school diploma or demonstrated equivalent.
* Five years of experience performing Control System / Building Automation/Management System service and repair in a data center, heavy industrial, or pharmaceutical/biomedical environment, or demonstrated equivalent combination of education and experience.
* Knowledge of data center infrastructure including related HVAC and electrical equipment.
* Preferred experience with Tridium Niagara (AX/N4) or other systems such as ALC, Honeywell, Schneider Electric and Siemens and associated instrumentation.
* Experience troubleshooting Control Systems, BAS/BMS systems including but not limited to (Automated Logic, Honeywell, Siemens, Edstrom, etc.)
* Possess knowledge of Building Systems sequence of operations
* Experience diagnosing, troubleshooting and repairing process mechanical systems
* MUST BE A US CITIZEN
Computer Skills:
* Proficient knowledge of Microsoft Office and software
Certificates and Licenses:
* No certificates or licenses required
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $65,013 - $97,580 per year
Apply for this Position
Controls & Integration Engineer III, Electrical
Location:
Jessup, MD
Job Id:
914
# of Openings:
2
TITLE: Controls & Integration Engineer III, Electrical
LOCATION: Jessup, MD
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Generate design documents for SCADA/Automation projects
- Develop design document narratives
- Perform requirements analysis
- Generate Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical engineering and 5-7 years field experience
- Associate degree in the electrical field and 10 years field experience
- High school diploma and 15 years field experience
- 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- Must be a US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-verify
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans, and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Rochester, NY
SUMMARY: THIS POSITION WILL PRIMARILY FOCUS ON THE VALIDATION TASKS OF THE JOB DESCRIPTION
Apply project management and technical expertise to successfully deliver Validation program goals and outcomes while interacting with customers and meeting their expectations.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Validation
- Manage the scope, schedule, and reporting of Validation program activities for individual products and/or customers; ensure status, risks, and open issues are tracked and that all stakeholders (Management, internal/external clients, Business Managers/Project Managers, and regulatory agencies) are informed in a timely manner.
- Write and execute IQ/OQ/PQ validation protocols, and manage the associated deviation process.
- Management and leadership of the change control, calibration, and gage R&R processes.
- Provide hands-on support to manufacturing areas as required to assist with problem-solving and long-term changes that lead to product/process improvements related to process failures. Collect and analyze data to make data-driven recommendations/decisions.
- Participate in process failure investigations.
- Maintain up-to-date knowledge of validation requirements, practices, and procedures, and instruct other site members participating in validation studies.
- Support risk analysis activities, including design and process FMEA.
- Facilitate team meetings as needed on in-depth process and product analysis, risk assessments, decision-making, and other evaluations related to the Validation program.
- Assist in internal and 3rd party audits.
- Provide backup for Quality Supervisors and Quality technicians.
- Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objectives, helping establish problem-solving teams and methods, and recommending capital projects that improve Safety, Productivity, and Quality.
- Write and improve manuals, standards, and procedures as needed.
- Use of statistical software and techniques for analysis of data, including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE)
- Other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below represent the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
Bachelor's degree in science, mathematics, or engineering from a four-year college or university, and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is preferred.
LANGUAGE SKILLS
Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors.
MATHEMATICAL SKILLS
Ability to apply advanced mathematical concepts. Ability to utilize descriptive statistics (average, variation, standard deviation) to analyze data and support process control and capability analysis. Ability to create and interpret control charts, histograms, Pareto charts, and scatter diagrams. Ability to develop statistically appropriate sampling plans. Ability to use and learn statistical analysis software.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret a wide variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel, and talk or hear. The employee is frequently required to sit and reach with hands and arms. The employee is occasionally required to stand, walk, climb, or balance, and to stoop, kneel, crouch, or crawl. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at .
Salary Description
$65,000 - $110,000/year
Controls & Integration Engineer I, Mechanical
Location:
Remote
Job Id:
917
# of Openings:
1
TITLE: Controls & Integration Engineer I, Mechanical
LOCATION: Dallas, TX
POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field TestingMaintenance
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
- Experience in reading mechanical and control schematics
- Experience in building automation systems (BAS) startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with test equipment and test equipment software
- Experience with networking design, configuration, and troubleshooting
- Experience with air handlers, chiller plant systems and data center CRAC units
- Ability to travel up to 80%
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
With a passion for life
Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.
Are you looking for an inspiring career? You just found it.
Steritec Products Inc., a member of the Getinge Group, manufactures sterilization and cleaning medical device consumables using ink technology. We manufacture and print highly specialized proprietary inks that undergo specific color changes when exposed to different sterilization conditions in hospital and industrial/pharmaceutical sterilizers.
We are located in the beautiful Inverness Business Park in Englewood, CO. We offer a generous benefit package (medical, dental, vision, life, LTD, 401(k) as well as PTO, company-paid holidays and much more) all effective first day of employment!
This Maintenance Technician III position is an on-site, full-time, non-exempt position. Hours are Monday - Friday, 9:30am - 6:00pm (with some flexibility).
Job Summary:
The Maintenance Technician III provides preventative maintenance and repair services at the Denver establishment, following manufacturers' instructions and utilizing knowledge of mechanical, hydraulic, and electronic equipment (as appropriate to position level). This position is primarily responsible for on-going maintenance, development, and upkeep of facility equipment and complex sterilization equipment.
Preferred skills include LabView maintenance and programming to interface with sterilization equipment, including sensors, actuators, and instrumentation devices.
In addition, this position is responsible for independently maintaining, diagnosing, and repairing sterilizers and other laboratory equipment, as needed.
Responsible for maintaining all the equipment in the facility, the facility itself inside and out, and miscellaneous maintenance duties as needed. Special emphasis placed on accurate record keeping for FDA GMP purposes with focus on maintaining accurate maintenance logs.
Job Functions:
- Provide preventative maintenance at location in accordance with established procedures and techniques using proper tools, test equipment and replacement parts.
- Comply with all health and safety codes and procedures as mandated by Getinge policies, quality requirements and regulatory agencies.
- Establish and maintain positive and cooperative working relationships with customers and all Getinge personnel.
- Maintain personal competence for meeting job responsibilities through effective use of product information and technical data provided by Getinge and others.
- Participate in training seminars, meetings and on-the-job training programs.
- Demonstrate an understanding of and an ability to apply concepts and knowledge obtained from these training and skill development sources.
- Accurately prepare and submit on schedule all required reports.
- Maintain expenses and required inventory within guidelines and limits established by the Operations Manager.
- Satisfactorily complete all training as required by Getinge training and certification processes, regulatory bodies, and quality systems.
- Perform other related duties as assigned.
- Keeps all equipment in good working order including the manufacturing equipment, printing equipment, shipping equipment, material handling, sterilizing equipment and office equipment.
- Keeps the facility and facility grounds clean and in good condition.
- Establishes a schedule and conducts effective preventive maintenance.
- Ability to start up, perform testing and preventative maintenance on boiler system. knowledge and ability to perform equipment and system preventative maintenance and inspection.
Required Knowledge, Skills and Abilities:
- 3+ years' experience with industrial machine maintenance and electronic wiring and soldering or equivalent combination of education and directly related experience.
- FDA/ISO exposure and document control and ability to read, interpret and test according to FDA and ISO standards a plus
- Higher-temperature repair and pipe fitting experience a plus
- Pressurized systems maintenance preferred
- Very strong technical proficiency in using schematics, system diagrams and repair/replacement procedures to troubleshoot, repair, and calibrate all products assigned.
- Has the ability to assist with troubleshoot, repair and install facility and production equipment in an efficient manner to minimize operation downtime
- Desirable to have experience and understanding of electronic circuit logics (e.g. discrete, TTL, MOS, and linear circuits) and Relay Ladder Logic troubleshooting and PLC programming
- Printing equipment repair experience a plus
- Knowledge of various steam equipment operations desired
- Computer literacy; familiarity with information technology concepts, personal computers, Microsoft Windows operating system and Microsoft Office applications.
- Strong verbal and written communication skills.
- Functional troubleshooting and diagnostic skills.
- Strong organizational skills and detail oriented. Self-motivated, self-starter, and ability to work independently
- Ability to travel nationally (corporate training, 10%)
Quality Requirements:
- Build Quality into all aspects of work
- Ensure compliance to all FDA and Worldwide Quality & Compliance regulations (As applicable to your job function)
- You must have the education and experience to understand and comply with U.S. and Worldwide medical device regulations (As applicable to your job function)
- Attend all required Quality & Compliance training at the specified interval
- Adopt the "Beyond Compliance Quality Culture" in the work environment; always meet and exceed requirements
- Must practice verbatim compliance (exact compliance, no interpretation) with corporate Quality and Regulatory procedures (As applicable to your job function)
- If your job description requires customer facing activities, you must thoroughly understand and comply with the Customer complaint reporting process and complaint procedures (As applicable to your job function)
- Must be able to promptly report any non-compliance issues to Director QA, RA, Compliance officer or appropriate administrator, including the Compliance Hotline
- Must be compliant with 21 CFR 820 and any other applicable federal regulations, and Quality standards (As applicable to your job function)
Environmental/Safety/Physical Work Conditions:
- Must be able to respond to inquiries and communicate with others in writing and via telephone.
- Must be able to decipher data from computer-generated reports, software programs, technical manuals and written correspondence.
- Must be able to wear required personal protective equipment (including biological/chemical protection) whenpotential hazards exist on company premises.
- Must be able to safely and correctly manipulate and utilize required hand tools.
- Ordinarily, and generally speaking, temporary modifications of this position to accommodate for light duty orphysical limitations is not feasible due to the independent nature of the position as well as the physical nature of the basic required job duties.
- Must be able to work at PC work station/laptop 1/4 of standard workweek.
- Responsible for understanding and conforming to the Environmental Policy to ensure that significantenvironmental aspects that relate to actual or potential impacts with their work are executed to minimize theeffects on the environment
- Responsible for bringing to the attention of management any potential improvements that could reduce our environmental impact or to report activities that could result in a negative impact to the environment
- Responsible for understanding and conforming to the Health and Safety Policy to ensure that the significantrisks that relate to actual or potential hazards with their work are identified
- May work extended hours during peak business cycles.
- Ability to speak clearly in order to communicate with customers, vendors and employees in person
- Must be willing to work in both sitting and standing positions for long periods of time, up to 8 hours per shift.
- Willingness to frequently move to various locations within building
Internal and External Contacts/Relationships:
- Employees
- Top Management
- Training and Development Department
- 3rd party contractors
Pay rate: $28 - $40 / hr, depending on experience
#LI-BS1
About us
With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.
Benefits at Getinge:
At Getinge, we offer a comprehensive benefits package, which includes:
- Health, Dental, and Vision insurance benefits
- 401k plan with company match
- Paid Time Off
- Wellness initiative & Health Assistance Resources
- Life Insurance
- Short and Long Term Disability Benefits
- Health and Dependent Care Flexible Spending Accounts
- Commuter Benefits
- Parental and Caregiver Leave
- Tuition Reimbursement
Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.
ESSENTIAL FUNCTIONS:
Medical Assistant’s may have duties in one or more of the following areas:
Medical Assistant
- Demonstrates ability to recognize urgent/emergent needs of patients and initiate appropriate emergency procedures as needed.
- Demonstrates current level of knowledge of various payor regulations by functioning within those guidelines.
- Follows clinic procedure/protocol for the organization and management of the electronic medical record (i.e. test results, retrieval, filing, creation, repair, charging of electronic medical record).
- Acts to facilitate interdisciplinary communication. Utilizes other members of the health care team in assessing the patient and analyzes patient data. Assesses learning needs of the patient and significant others. Gives accurate and complete information to patient and family.
- Evaluates patient and family understanding of treatment plan and/or instructions.
- Assists with a variety of procedures, exams and/or operation of diagnostic equipment as assigned (i.e. EKG, spirometry, tympanometry, etc.).
- Maintains appropriate aseptic technique for preparation, procedures and medications administered.
- Accurately documents all patient interactions in electronic medical record.
- Reports results and pertinent information to patients and health care team members.
- Functions according to limitations or scope of license or certification.
- Performs basic medical assistant functions (vitals, rooming, assist with procedures, immunizations, medication injections etc), under direction and supervision of provider.
- Maintains professional appearance of patient exam and procedure rooms.
- Maintains supplies in assigned area
- Coordinates on-going patient flow through the clinic process ensuring efficient and effective continuity, accurate completion of all required forms, greeting patients, verifying demographics and insurance information, and coordinating physician releases.
- Assures the conveyance of accurate and complete messages to appropriate personnel.
- Responsible for the development, tracking and/or completeness of the charge ticket process through the patient visit.
- Demonstrates functional knowledge of third party payers.
Surgery Scheduler:
- Familiar with ICD-9/10 coding and CPT coding.
- Coordinates physician surgery schedules between OR and office.
- Proficient in computer and internet skills to access payers websites, perform surgery scheduling on multiple systems, verify patient eligibility for benefits, and to obtain surgery pre-certifications.
- Provides appropriate pre- and post-surgery information, organization of surgery scheduling management.
Referral Liaison
- Meets with patients both in person and by phone and is the point person in their coordination of care.
- Works closely with insurance companies and makes referrals according to their guidelines and policies.
- Coordinates referrals with other provider’s offices in a timely manner.
- Implements and follows a tracking system for all referrals.
- Processes requests for physical forms/immunization forms for parents, daycares, and schools as time allows.
Lab
- Performs laboratory testing (including phlebotomy and a variety of routine and/or automated tests), and maintains records of tests performed and results received.
- Reports results and pertinent information to patient and health care team members.
- Complies with regulatory agencies (i.e. CLIA, COLA, OSHA in operation of lab).
- Responsible for quality control and proficiency testing appropriate for the testing performed ensuring that levels are maintained throughout the entire testing procedure from the initial quality control, throughout testing, and reporting of test results.
- Responsible for reporting technical problems and ensure that remedial actions are taken whenever tests deviate from established performance specifications.
- Coordinates a variety of procedures, exams and diagnostic equipment.
MARGINAL FUNCTIONS:
- Work includes cross coverage in other clinic areas as team needs.
- Responsible for following equipment maintenance protocol, identifying problems, and coordinating appropriate repairs.
- Participates in Performance Improvement projects.
MINIMUM KNOWLEDGE, SKILLS AND ABILITIES REQUIRED:
- Successful completion of a medical assistant program accredited by the Commission on Accreditation of Allied Health Programs (CAAHP) or Accrediting Bureau of Health Education Schools (ABHES).
- Certified Medical Assistant (CMA) certification or Registered Medical Assistant (RMA) certification must be obtained within first year of employment and maintained thereafter.
- Clinic/physician office experience preferred.
- Basic Life Support (BLS) for the Healthcare Provider certified or obtained within three (3) months of hire.
- Proof of completion of Mandatory Reporter abuse training specific to population serve within three (3) months of hire.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
ESSENTIAL FUNCTIONS:
Medical Assistant’s may have duties in one or more of the following areas:
Medical Assistant
- Demonstrates ability to recognize urgent/emergent needs of patients and initiate appropriate emergency procedures as needed.
- Demonstrates current level of knowledge of various payor regulations by functioning within those guidelines.
- Follows clinic procedure/protocol for the organization and management of the electronic medical record (i.e. test results, retrieval, filing, creation, repair, charging of electronic medical record).
- Acts to facilitate interdisciplinary communication. Utilizes other members of the health care team in assessing the patient and analyzes patient data. Assesses learning needs of the patient and significant others. Gives accurate and complete information to patient and family.
- Evaluates patient and family understanding of treatment plan and/or instructions.
- Assists with a variety of procedures, exams and/or operation of diagnostic equipment as assigned (i.e. EKG, spirometry, tympanometry, etc.).
- Maintains appropriate aseptic technique for preparation, procedures and medications administered.
- Accurately documents all patient interactions in electronic medical record.
- Reports results and pertinent information to patients and health care team members.
- Functions according to limitations or scope of license or certification.
- Performs basic medical assistant functions (vitals, rooming, assist with procedures, immunizations, medication injections etc), under direction and supervision of provider.
- Maintains professional appearance of patient exam and procedure rooms.
- Maintains supplies in assigned area
- Coordinates on-going patient flow through the clinic process ensuring efficient and effective continuity, accurate completion of all required forms, greeting patients, verifying demographics and insurance information, and coordinating physician releases.
- Assures the conveyance of accurate and complete messages to appropriate personnel.
- Responsible for the development, tracking and/or completeness of the charge ticket process through the patient visit.
- Demonstrates functional knowledge of third party payers.
Surgery Scheduler:
- Familiar with ICD-9/10 coding and CPT coding.
- Coordinates physician surgery schedules between OR and office.
- Proficient in computer and internet skills to access payers websites, perform surgery scheduling on multiple systems, verify patient eligibility for benefits, and to obtain surgery pre-certifications.
- Provides appropriate pre- and post-surgery information, organization of surgery scheduling management.
Referral Liaison
- Meets with patients both in person and by phone and is the point person in their coordination of care.
- Works closely with insurance companies and makes referrals according to their guidelines and policies.
- Coordinates referrals with other provider’s offices in a timely manner.
- Implements and follows a tracking system for all referrals.
- Processes requests for physical forms/immunization forms for parents, daycares, and schools as time allows.
Lab
- Performs laboratory testing (including phlebotomy and a variety of routine and/or automated tests), and maintains records of tests performed and results received.
- Reports results and pertinent information to patient and health care team members.
- Complies with regulatory agencies (i.e. CLIA, COLA, OSHA in operation of lab).
- Responsible for quality control and proficiency testing appropriate for the testing performed ensuring that levels are maintained throughout the entire testing procedure from the initial quality control, throughout testing, and reporting of test results.
- Responsible for reporting technical problems and ensure that remedial actions are taken whenever tests deviate from established performance specifications.
- Coordinates a variety of procedures, exams and diagnostic equipment.
MARGINAL FUNCTIONS:
- Work includes cross coverage in other clinic areas as team needs.
- Responsible for following equipment maintenance protocol, identifying problems, and coordinating appropriate repairs.
- Participates in Performance Improvement projects.
MINIMUM KNOWLEDGE, SKILLS AND ABILITIES REQUIRED:
- Successful completion of a medical assistant program accredited by the Commission on Accreditation of Allied Health Programs (CAAHP) or Accrediting Bureau of Health Education Schools (ABHES).
- Certified Medical Assistant (CMA) certification or Registered Medical Assistant (RMA) certification must be obtained within first year of employment and maintained thereafter.
- Clinic/physician office experience preferred.
- Basic Life Support (BLS) for the Healthcare Provider certified or obtained within three (3) months of hire.
- Proof of completion of Mandatory Reporter abuse training specific to population serve within three (3) months of hire.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
